diff options
Diffstat (limited to 'util')
| -rw-r--r-- | util/flashrom/README | 30 | ||||
| -rw-r--r-- | util/flashrom/flashrom.8 | 35 |
2 files changed, 37 insertions, 28 deletions
diff --git a/util/flashrom/README b/util/flashrom/README index 59a4299c58..7be37c74c7 100644 --- a/util/flashrom/README +++ b/util/flashrom/README @@ -18,8 +18,8 @@ installed on your Linux system: Usage ----- -usage: ./flashrom [-rwvEVfh] [-c chipname] [-s exclude_start] - [-e exclude_end] [-m vendor:part] [-l file.layout] [-i imagename] [file] + $ flashrom [-rwvEVfh] [-c chipname] [-s exclude_start] [-e exclude_end] + [-m vendor:part] [-l file.layout] [-i imagename] [file] -r | --read: read flash and save into file -w | --write: write file into flash (default when file is specified) @@ -41,11 +41,11 @@ usage: ./flashrom [-rwvEVfh] [-c chipname] [-s exclude_start] LinuxBIOS Table and Mainboard Identification -------------------------------------------- -Flashrom reads the LinuxBIOS table to determine the current mainboard. -(Parse DMI as well in future?) If no LinuxBIOS table could be read +Flashrom reads the LinuxBIOS table to determine the current mainboard +(parse DMI as well in future?). If no LinuxBIOS table could be read or if you want to override these values, you can specify -m, e.g.: - flashrom -w --mainboard ISLAND:ARUMA island_aruma.rom + flashrom -w --mainboard AGAMI:ARUMA agami_aruma.rom The following boards require the specification of the board name, if no LinuxBIOS table is found: @@ -55,8 +55,10 @@ no LinuxBIOS table is found: * ASUS P5A: use -m asus:p5a * IBM x3455: use -m ibm:x3455 * EPoX EP-BX3: use -m epox:ep-bx3 -* GIGABYTE GA-M57SLI v2.0: use -m gigabyte:m57sli -* GIGABYTE GA-M61P-S3: use -m gigabyte:m61ps3 +* GIGABYTE GA-M57SLI-S4 v2.0: use -m gigabyte:m57sli +* GIGABYTE GA-M61P-S3: use -m gigabyte:m61p +* MSI K8N Neo3: use -m msi:k8n-neo3 + ROM Layout Support ------------------ @@ -71,27 +73,27 @@ the flash chip only. A ROM layout file looks like follows: i.e.: startaddr:endaddr name - all addresses are offsets within the file, not absolute addresses! + All addresses are offsets within the file, not absolute addresses! If you only want to update the normal image in a ROM you can say: - flashrom -w --layout rom.layout --image normal island_aruma.rom + flashrom -w --layout rom.layout --image normal agami_aruma.rom To update normal and fallback but leave the VGA BIOS alone, say: - flashrom -w -l rom.layout -i normal -i fallback island_aruma.rom + flashrom -w -l rom.layout -i normal -i fallback agami_aruma.rom Currently overlapping sections are not supported. ROM layouts should replace the -s and -e option since they are more flexible and they should lead to a ROM update file format with the -ROM layout and the ROM image in one file (cpio, zip or something?) +ROM layout and the ROM image in one file (cpio, zip or something?). -DOC support ------------ +Disk on Chip support +-------------------- -DISK on Chip support is currently disabled since it is considered unstable. +Disk on Chip support is currently disabled since it is considered unstable. Change CFLAGS in the Makefile to enable it: Remove -DDISABLE_DOC from CFLAGS. diff --git a/util/flashrom/flashrom.8 b/util/flashrom/flashrom.8 index 6725b373ce..1803bf826d 100644 --- a/util/flashrom/flashrom.8 +++ b/util/flashrom/flashrom.8 @@ -1,4 +1,4 @@ -.TH FLASHROM 8 "December 20, 2006" +.TH FLASHROM 8 "October 18, 2007" .SH NAME flashrom \- a universal flash programming utility .SH SYNOPSIS @@ -6,24 +6,23 @@ flashrom \- a universal flash programming utility [\fB-m\fR vendor:part] [\fB-l\fR file.layout] [\fB-i\fR image_name] [file] .SH DESCRIPTION .B flashrom -is a universal flash programming utility for flash chips -(e.g. in DIP or PLCC packaging). It can be used to flash BIOS images, -for example. +is a universal flash programming utility for DIP, PLCC, or SPI flash ROM +chips. It can be used to flash BIOS/LinuxBIOS/firmware images, for example. .SH OPTIONS If no file is specified, then all that happens is that flash info is dumped and the flash chip is set to writable. .TP .B "\-r, \-\-read" -Read flash and save contents into file. +Read flash ROM contents an save them into the given file. .TP .B "\-w, \-\-write" Write file into flash (default when file is specified). .TP .B "\-v, \-\-verify" -Verify flash against file. +Verify the flash ROM contents against the given file. .TP .B "\-E, \-\-erase" -Erase flash device. +Erase the flash device. .TP .B "\-V, \-\-verbose" More verbose output. @@ -38,16 +37,25 @@ Exclude start position. (obsolete) Exclude end postion. (obsolete) .TP .B "\-m, \-\-mainboard" <vendor:part> -Override mainboard settings. +Override mainboard settings. This option is needed for some mainboards, +see the +.B flashrom +README for a list. .TP .B "\-f, \-\-force" -Force write without checking image. +Force write without checking whether the ROM image file is really meant +to be used on this board. +.sp +Note: This check only works while LinuxBIOS is running, and only for those +boards where the LinuxBIOS code supports it. .TP .B "\-l, \-\-layout" <layout.file> Read ROM layout from file. .TP .B "\-i, \-\-image" <name> -Only flash image name from flash layout. +Only flash image +.B <name> +from flash layout. .TP .B "\-h, \-\-help" Show a help text and exit. @@ -55,13 +63,12 @@ Show a help text and exit. .\".B "\-\-version" .\"Show version information and exit. .SH BUGS -Please report any bugs at http://tracker.linuxbios.org/trac/LinuxBIOS/. +Please report any bugs at http://tracker.linuxbios.org/trac/LinuxBIOS/, +or on the LinuxBIOS mailing list (http://linuxbios.org/Mailinglist). .SH LICENCE .B flashrom is covered by the GNU General Public License (GPL), version 2 or later. -.SH SEE ALSO -.BR romcc (1), -.BR abuild (1). +.\" .SH SEE ALSO .SH COPYRIGHT 2000 Silicon Integrated System Corporation .br |