diff options
Diffstat (limited to 'util/superiotool/fintek.c')
| -rw-r--r-- | util/superiotool/fintek.c | 63 |
1 files changed, 0 insertions, 63 deletions
diff --git a/util/superiotool/fintek.c b/util/superiotool/fintek.c index bdabbc6583..461be1821f 100644 --- a/util/superiotool/fintek.c +++ b/util/superiotool/fintek.c @@ -70,68 +70,6 @@ const static struct superio_registers reg_table[] = { {EOT} }; -static void dump_readable_fintek(uint16_t port, uint16_t did) -{ - if (!dump_readable) - return; - - printf("Human-readable register dump:\n"); - - printf("Flash write is %s.\n", - regval(port, 0x28) & 0x80 ? "enabled" : "disabled"); - printf("Flash control is 0x%04x.\n", regval(port, 0x28)); - printf("27=%02x\n", regval(port, 0x27)); - printf("29=%02x\n", regval(port, 0x29)); - printf("2a=%02x\n", regval(port, 0x2a)); - printf("2b=%02x\n", regval(port, 0x2b)); - - /* Select UART 1. */ - regwrite(port, 0x07, 0x01); - printf("UART1 is %s\n", - regval(port, 0x30) & 1 ? "enabled" : "disabled"); - printf("UART1 base=%02x%02x, irq=%02x, mode=%s\n", regval(port, 0x60), - regval(port, 0x61), regval(port, 0x70) & 0x0f, - regval(port, 0xf0) & 0x10 ? "RS485" : "RS232"); - - /* Select UART 2. */ - regwrite(port, 0x07, 0x02); - printf("UART2 is %s\n", - regval(port, 0x30) & 1 ? "enabled" : "disabled"); - printf("UART2 base=%02x%02x, irq=%02x, mode=%s\n", regval(port, 0x60), - regval(port, 0x61), regval(port, 0x70) & 0x0f, - regval(port, 0xf0) & 0x10 ? "RS485" : "RS232"); - - /* Select parallel port. */ - regwrite(port, 0x07, 0x03); - printf("PARPORT is %s\n", - regval(port, 0x30) & 1 ? "enabled" : "disabled"); - printf("PARPORT base=%02x%02x, irq=%02x\n", regval(port, 0x60), - regval(port, 0x61), regval(port, 0x70) & 0x0f); - - /* Select HW monitor. */ - regwrite(port, 0x07, 0x04); - printf("HW monitor is %s\n", - regval(port, 0x30) & 1 ? "enabled" : "disabled"); - printf("HW monitor base=%02x%02x, irq=%02x\n", regval(port, 0x60), - regval(port, 0x61), regval(port, 0x70) & 0x0f); - - /* Select GPIO. */ - regwrite(port, 0x07, 0x05); - printf("GPIO is %s\n", regval(port, 0x30) & 1 ? "enabled" : "disabled"); - printf - ("GPIO 70=%02x, e0=%02x, e1=%02x, e2=%02x, e3=%02x, e4=%02x, e5=%02x\n", - regval(port, 0x70), regval(port, 0xe0), regval(port, 0xe1), - regval(port, 0xe2), regval(port, 0xe3), regval(port, 0xe4), - regval(port, 0xe5)); - printf - ("GPIO e6=%02x, e7=%02x, e8=%02x, e9=%02x, f0=%02x, f1=%02x, f3=%02x, f4=%02x\n", - regval(port, 0xe6), regval(port, 0xe7), regval(port, 0xe8), - regval(port, 0xe9), regval(port, 0xf0), regval(port, 0xf1), - regval(port, 0xf3), regval(port, 0xf4)); - printf("GPIO f5=%02x, f6=%02x, f7=%02x, f8=%02x\n", regval(port, 0xf5), - regval(port, 0xf6), regval(port, 0xf7), regval(port, 0xf8)); -} - void probe_idregs_fintek(uint16_t port) { uint16_t vid, did; @@ -158,7 +96,6 @@ void probe_idregs_fintek(uint16_t port) chip_found = 1; dump_superio("Fintek", reg_table, port, did); - dump_readable_fintek(port, did); exit_conf_mode_winbond_fintek_ite_8787(port); } |