1 files changed, 0 insertions, 148 deletions
diff --git a/util/romcc/tests/simple_test20.c b/util/romcc/tests/simple_test20.c
deleted file mode 100644
index f32aeac8af..0000000000
--- a/util/romcc/tests/simple_test20.c
+++ /dev/null
@@ -1,148 +0,0 @@
-static void outb(unsigned char value, unsigned short port)
-{
-        __builtin_outb(value, port);
-}
-
-static void outl(unsigned int value, unsigned short port)
-{
-	__builtin_outl(value, port);
-}
-
-static unsigned char inb(unsigned short port)
-{
-        return __builtin_inb(port);
-}
-
-static unsigned char inl(unsigned short port)
-{
-	return __builtin_inl(port);
-}
-
-static unsigned int config_cmd(unsigned char bus, unsigned devfn, unsigned where)
-{
-	return 0x80000000 | (bus << 16) | (devfn << 8) | (where & ~3);
-}
-
-static unsigned int pcibios_read_config_dword(
-	unsigned char bus, unsigned devfn, unsigned where)
-{
-	outl(config_cmd(bus, devfn, where), 0xCF8);
-	return inl(0xCFC);
-}
-
-
-
-/* Base Address */
-#ifndef CONFIG_TTYS0_BASE
-#define CONFIG_TTYS0_BASE 0x3f8
-#endif
-
-#ifndef CONFIG_TTYS0_BAUD
-#define CONFIG_TTYS0_BAUD 115200
-#endif
-
-#if ((115200%CONFIG_TTYS0_BAUD) != 0)
-#error Bad ttys0 baud rate
-#endif
-
-#define CONFIG_TTYS0_DIV	(115200/CONFIG_TTYS0_BAUD)
-
-/* Line Control Settings */
-#ifndef CONFIG_TTYS0_LCS
-/* Set 8bit, 1 stop bit, no parity */
-#define CONFIG_TTYS0_LCS	0x3
-#endif
-
-#define UART_LCS	CONFIG_TTYS0_LCS
-
-/* Data */
-#define UART_RBR 0x00
-#define UART_TBR 0x00
-
-/* Control */
-#define UART_IER 0x01
-#define UART_IIR 0x02
-#define UART_FCR 0x02
-#define UART_LCR 0x03
-#define UART_MCR 0x04
-#define UART_DLL 0x00
-#define UART_DLM 0x01
-
-/* Status */
-#define UART_LSR 0x05
-#define UART_MSR 0x06
-#define UART_SCR 0x07
-
-int uart_can_tx_byte(void)
-{
-	return inb(CONFIG_TTYS0_BASE + UART_LSR) & 0x20;
-}
-
-void uart_wait_to_tx_byte(void)
-{
-	while(!uart_can_tx_byte())
-		;
-}
-
-void uart_wait_until_sent(void)
-{
-	while(!(inb(CONFIG_TTYS0_BASE + UART_LSR) & 0x40))
-		;
-}
-
-void uart_tx_byte(unsigned char data)
-{
-	uart_wait_to_tx_byte();
-	outb(data, CONFIG_TTYS0_BASE + UART_TBR);
-	/* Make certain the data clears the fifos */
-	uart_wait_until_sent();
-}
-
-void uart_init(void)
-{
-	/* disable interrupts */
-	outb(0x0, CONFIG_TTYS0_BASE + UART_IER);
-	/* enable fifo's */
-	outb(0x01, CONFIG_TTYS0_BASE + UART_FCR);
-	/* Set Baud Rate Divisor to 12 ==> 115200 Baud */
-	outb(0x80 | UART_LCS, CONFIG_TTYS0_BASE + UART_LCR);
-	outb(CONFIG_TTYS0_DIV & 0xFF,   CONFIG_TTYS0_BASE + UART_DLL);
-	outb((CONFIG_TTYS0_DIV >> 8) & 0xFF,    CONFIG_TTYS0_BASE + UART_DLM);
-	outb(UART_LCS, CONFIG_TTYS0_BASE + UART_LCR);
-}
-
-void __console_tx_char(unsigned char byte)
-{
-	uart_tx_byte(byte);
-}
-void __console_tx_nibble(unsigned nibble)
-{
-	unsigned char digit;
-	digit = nibble + '0';
-	if (digit > '9') {
-		digit += 39;
-	}
-	__console_tx_char(digit);
-}
-
-void __console_tx_hex32(unsigned int value)
-{
-	__console_tx_nibble((value >> 28) & 0x0f);
-	__console_tx_nibble((value >> 24) & 0x0f);
-	__console_tx_nibble((value >> 20) & 0x0f);
-	__console_tx_nibble((value >> 16) & 0x0f);
-	__console_tx_nibble((value >> 12) & 0x0f);
-	__console_tx_nibble((value >>  8) & 0x0f);
-	__console_tx_nibble((value >>  4) & 0x0f);
-	__console_tx_nibble(value & 0x0f);
-}
-
-void print_debug_hex32(unsigned int value) { __console_tx_hex32(value); }
-
-
-void main(void)
-{
-	unsigned long htic;
-	htic = pcibios_read_config_dword(0, 0xc0, 0x6c);
-	print_debug_hex32(htic);
-}