diff options
Diffstat (limited to 'util/romcc/tests/simple_test1.c')
-rw-r--r-- | util/romcc/tests/simple_test1.c | 252 |
1 files changed, 0 insertions, 252 deletions
diff --git a/util/romcc/tests/simple_test1.c b/util/romcc/tests/simple_test1.c deleted file mode 100644 index 9791d9e352..0000000000 --- a/util/romcc/tests/simple_test1.c +++ /dev/null @@ -1,252 +0,0 @@ -void land_test(void) -{ - int i; - i = 1 && 2; -} -void lor_test(void) -{ - int i; - i = 1 || 2; -} - -void outb(unsigned char value, unsigned short port) -{ - __builtin_outb(value, port); -} - -unsigned char inb(unsigned short port) -{ - return __builtin_inb(port); -} - -static unsigned int config_cmd2(unsigned char bus, unsigned devfn, unsigned where) -{ - return 0x80000000 | (bus << 16) | (devfn << 8) | (where & ~3) ; -} - -/* Base Address */ -#ifndef CONFIG_TTYS0_BASE -#define CONFIG_TTYS0_BASE 0x3f8 -#endif - -#ifndef CONFIG_TTYS0_BAUD -#define CONFIG_TTYS0_BAUD 115200 -#endif - -#if ((115200%CONFIG_TTYS0_BAUD) != 0) -#error Bad ttys0 baud rate -#endif - -#define CONFIG_TTYS0_DIV (115200/CONFIG_TTYS0_BAUD) - -/* Line Control Settings */ -#ifndef CONFIG_TTYS0_LCS -/* Set 8bit, 1 stop bit, no parity */ -#define CONFIG_TTYS0_LCS 0x3 -#endif - -#define UART_LCS CONFIG_TTYS0_LCS - -/* Data */ -#define UART_RBR 0x00 -#define UART_TBR 0x00 - -/* Control */ -#define UART_IER 0x01 -#define UART_IIR 0x02 -#define UART_FCR 0x02 -#define UART_LCR 0x03 -#define UART_MCR 0x04 -#define UART_DLL 0x00 -#define UART_DLM 0x01 - -/* Status */ -#define UART_LSR 0x05 -#define UART_MSR 0x06 -#define UART_SCR 0x07 - -int uart_can_tx_byte(void) -{ - return inb(CONFIG_TTYS0_BASE + UART_LSR) & 0x20; -} - -void uart_wait_to_tx_byte(void) -{ - while(!uart_can_tx_byte()) - ; -} - -void uart_wait_until_sent(void) -{ - while(!(inb(CONFIG_TTYS0_BASE + UART_LSR) & 0x40)) - ; -} - -void uart_tx_byte(unsigned char data) -{ - uart_wait_to_tx_byte(); - outb(data, CONFIG_TTYS0_BASE + UART_TBR); - /* Make certain the data clears the fifos */ - uart_wait_until_sent(); -} - -void dummy(void) -{ - uart_tx_byte(5); -} - -#define PIIX4_DEVFN 0x90 -#define SMBUS_MEM_DEVICE_START 0x50 -#define SMBUS_MEM_DEVICE_END 0x53 -#define SMBUS_MEM_DEVICE_INC 1 - - -#define PM_BUS 0 -#define PM_DEVFN (PIIX4_DEVFN+3) - -#define SMBUS_IO_BASE 0x1000 -#define SMBHSTSTAT 0 -#define SMBHSTCTL 2 -#define SMBHSTCMD 3 -#define SMBHSTADD 4 -#define SMBHSTDAT0 5 -#define SMBHSTDAT1 6 -#define SMBBLKDAT 7 - -static void smbus_wait_until_done(void) -{ - unsigned char byte; - do { - byte = inb(SMBUS_IO_BASE + SMBHSTSTAT); - }while((byte &1) == 1); -#if 1 - while( (byte & ~1) == 0) { - byte = inb(SMBUS_IO_BASE + SMBHSTSTAT); - } -#endif -} - -#if 0 -void ifthenelse(void) -{ - int i; - if (5 > 2) { - i = 1; - } - else { - i = 2; - } - i = i + 3; -} -#endif -#if 0 -static int add(int left, int right) -{ - { - return left + right; - } -} -#else -#if 0 -static int add(int left, int right) -{ - return left + right; -} -#endif -#endif - -#if 0 -static void assign(void) -{ - int i, j; - i = j = 1; -} -#endif - -#if 0 -static void and(void) -{ - int i, j, k; - i = 1; - j = 2; - k = i && j; - -} -static void and_test(void) -{ - and(); -} -#endif -#if 0 -#define INC_TEST 2 -static void inc(void) -{ - int i; - i = 5; -#if (INC_TEST == 1) - i += 7; -#endif -#if (INC_TEST == 2) - ++i; -#endif -#if (INC_TEST == 3) - i++; -#endif -} - -#if 0 -static void inc_test(void) -{ - inc(); -} -#endif -#endif -#if 0 -static void loop(void) -{ - int i; - for(i = 0; i < 10; i++) { - ; - } while(i < 10); -} - -static void loop_test(void) -{ - loop(); -} -#endif - -#if 0 -static void simple(void) -{ - add(1,2); -} -#endif - -#if 0 -static void fun(void) -{ - int bar; - bar = add(1, 2); -} -#endif - - -#if 0 -static void func(void) -{ - int bar, baz; - int i; - - baz = add(1, 2); - baz = add(1, 2); - bar = 1; - baz = 2; - for(i = 0; i < 10; i = i + 1) { - baz = i; - } - bar = 1 + 2 * 3; - bar = add(3, 4); - bar = add(bar, baz); -} -#endif |