1 files changed, 329 insertions, 0 deletions
diff --git a/util/intelp2m/platforms/apl/macro.go b/util/intelp2m/platforms/apl/macro.go
new file mode 100644
index 0000000000..4288fa448d
--- /dev/null
+++ b/util/intelp2m/platforms/apl/macro.go
@@ -0,0 +1,329 @@
+package apl
+
+import "fmt"
+import "strconv"
+
+// Local packages
+import "../common"
+import "../../config"
+import "../../fields"
+
+const (
+	PAD_CFG_DW0_RO_FIELDS = (0x1 << 27) | (0x1 << 24) | (0x3 << 21) | (0xf << 16) | 0xfc
+	PAD_CFG_DW1_RO_FIELDS = 0xfffc00ff
+)
+
+const (
+	PAD_CFG_DW0 = common.PAD_CFG_DW0
+	PAD_CFG_DW1 = common.PAD_CFG_DW1
+	MAX_DW_NUM  = common.MAX_DW_NUM
+)
+
+const (
+	PULL_NONE    = 0x0  // 0 000: none
+	PULL_DN_5K   = 0x2  // 0 010: 5k wpd (Only available on SMBus GPIOs)
+	PULL_DN_20K  = 0x4  // 0 100: 20k wpd
+	// PULL_NONE = 0x8  // 1 000: none
+	PULL_UP_1K   = 0x9  // 1 001: 1k wpu (Only available on I2C GPIOs)
+	PULL_UP_2K   = 0xb  // 1 011: 2k wpu (Only available on I2C GPIOs)
+	PULL_UP_20K  = 0xc  // 1 100: 20k wpu
+	PULL_UP_667  = 0xd  // 1 101: 1k & 2k wpu (Only available on I2C GPIOs)
+	PULL_NATIVE  = 0xf  // 1 111: (optional) Native controller selected by Pad Mode
+)
+
+type PlatformSpecific struct {}
+
+// RemmapRstSrc - remmap Pad Reset Source Config
+// remmap is not required because it is the same as common.
+func (PlatformSpecific) RemmapRstSrc() {}
+
+// Adds the PADRSTCFG parameter from DW0 to the macro as a new argument
+// return: macro
+func (PlatformSpecific) Rstsrc() {
+	macro := common.GetMacro()
+	dw0 := macro.Register(PAD_CFG_DW0)
+	// See src/soc/intel/apollolake/gpio_apl.c:
+	// static const struct reset_mapping rst_map[] = {
+	// { .logical = PAD_CFG0_LOGICAL_RESET_PWROK,  .chipset = 0U << 30 },
+	// { .logical = PAD_CFG0_LOGICAL_RESET_DEEP,   .chipset = 1U << 30 },
+	// { .logical = PAD_CFG0_LOGICAL_RESET_PLTRST, .chipset = 2U << 30 },
+	// };
+
+	var resetsrc = map[uint8]string{
+		0: "PWROK",
+		1: "DEEP",
+		2: "PLTRST",
+	}
+	str, valid := resetsrc[dw0.GetResetConfig()]
+	if !valid {
+			// 3h = Reserved (implement as setting 0h)
+			dw0.CntrMaskFieldsClear(common.PadRstCfgMask)
+			str = "PWROK"
+	}
+	macro.Separator().Add(str)
+}
+
+// Adds The Pad Termination (TERM) parameter from DW1 to the macro as a new argument
+// return: macro
+func (PlatformSpecific) Pull() {
+	macro := common.GetMacro()
+	dw1 := macro.Register(PAD_CFG_DW1)
+	var pull = map[uint8]string{
+		PULL_NONE:   "NONE",
+		PULL_DN_5K:  "DN_5K",
+		PULL_DN_20K: "DN_20K",
+		PULL_UP_1K:  "UP_1K",
+		PULL_UP_2K:  "UP_2K",
+		PULL_UP_20K: "UP_20K",
+		PULL_UP_667: "UP_667",
+		PULL_NATIVE: "NATIVE",
+
+	}
+	terminationFieldValue := dw1.GetTermination()
+	str, valid := pull[terminationFieldValue]
+	if !valid {
+		str = strconv.Itoa(int(terminationFieldValue))
+		fmt.Println("Error", macro.PadIdGet(), " invalid TERM value = ", str)
+	}
+	macro.Separator().Add(str)
+}
+
+// Generate macro to cause peripheral IRQ when configured in GPIO input mode
+func ioApicRoute() bool {
+	macro := common.GetMacro()
+	dw0 := macro.Register(PAD_CFG_DW0)
+	dw1 := macro.Register(PAD_CFG_DW1)
+	if dw0.GetGPIOInputRouteIOxAPIC() == 0 {
+		return false
+	}
+	macro.Add("_APIC")
+	if dw1.GetIOStandbyState() != 0 || dw1.GetIOStandbyTermination() != 0 {
+		// e.g. H1_PCH_INT_ODL
+		// PAD_CFG_GPI_APIC_IOS(GPIO_63, NONE, DEEP, LEVEL, INVERT, TxDRxE, DISPUPD),
+		macro.Add("_IOS(").Id().Pull().Rstsrc().Trig().Invert().IOSstate().IOTerm()
+	} else {
+		// PAD_CFG_GPI_APIC(pad, pull, rst, trig, inv)
+		macro.Add("(").Id().Pull().Rstsrc().Trig().Invert().Add("),")
+	}
+	macro.Add("),")
+	return true
+}
+
+// Generate macro to cause NMI when configured in GPIO input mode
+func nmiRoute() bool {
+	macro := common.GetMacro()
+	if macro.Register(PAD_CFG_DW0).GetGPIOInputRouteNMI() == 0 {
+		return false
+	}
+	// e.g. PAD_CFG_GPI_NMI(GPIO_24, UP_20K, DEEP, LEVEL, INVERT),
+	macro.Add("_NMI").Add("(").Id().Pull().Rstsrc().Trig().Invert().Add("),")
+	return true
+}
+
+// Generate macro to cause SCI when configured in GPIO input mode
+func sciRoute() bool {
+	macro := common.GetMacro()
+	dw0 := macro.Register(PAD_CFG_DW0)
+	dw1 := macro.Register(PAD_CFG_DW0)
+	if dw0.GetGPIOInputRouteSCI() == 0 {
+		return false
+	}
+	if dw1.GetIOStandbyState() != 0 || dw1.GetIOStandbyTermination() != 0 {
+		// PAD_CFG_GPI_SCI_IOS(GPIO_141, NONE, DEEP, EDGE_SINGLE, INVERT, IGNORE, DISPUPD),
+		macro.Add("_SCI_IOS")
+		macro.Add("(").Id().Pull().Rstsrc().Trig().Invert().IOSstate().IOTerm()
+	} else if dw0.GetRXLevelEdgeConfiguration() & 0x1 != 0 {
+		// e.g. PAD_CFG_GPI_ACPI_SCI(GPP_G2, NONE, DEEP, YES),
+		macro.Add("_ACPI_SCI").Add("(").Id().Pull().Rstsrc().Invert()
+	} else {
+		// e.g. PAD_CFG_GPI_SCI(GPP_B18, UP_20K, PLTRST, LEVEL, INVERT),
+		macro.Add("_SCI").Add("(").Id().Pull().Rstsrc().Trig().Invert()
+	}
+	macro.Add("),")
+	return true
+}
+
+// Generate macro to cause SMI when configured in GPIO input mode
+func smiRoute() bool {
+	macro := common.GetMacro()
+	dw0 := macro.Register(PAD_CFG_DW0)
+	dw1 := macro.Register(PAD_CFG_DW1)
+	if dw0.GetGPIOInputRouteSMI() == 0 {
+		return false
+	}
+	if dw1.GetIOStandbyState() != 0 || dw1.GetIOStandbyTermination() != 0 {
+		// PAD_CFG_GPI_SMI_IOS(GPIO_41, UP_20K, DEEP, EDGE_SINGLE, NONE, IGNORE, SAME),
+		macro.Add("_SMI_IOS")
+		macro.Add("(").Id().Pull().Rstsrc().Trig().Invert().IOSstate().IOTerm()
+	} else if dw0.GetRXLevelEdgeConfiguration() & 0x1 != 0 {
+		// e.g. PAD_CFG_GPI_ACPI_SMI(GPP_I3, NONE, DEEP, YES),
+		macro.Add("_ACPI_SMI").Add("(").Id().Pull().Rstsrc().Invert()
+	} else {
+		// e.g. PAD_CFG_GPI_SMI(GPP_E3, NONE, PLTRST, EDGE_SINGLE, NONE),
+		macro.Add("_SMI").Add("(").Id().Pull().Rstsrc().Trig().Invert()
+	}
+	macro.Add("),")
+	return true
+}
+
+// Generate macro for GPI port
+func (PlatformSpecific) GpiMacroAdd() {
+	macro := common.GetMacro()
+	var ids []string
+	macro.Set("PAD_CFG_GPI")
+	for routeid, isRoute := range map[string]func() (bool) {
+		"IOAPIC": ioApicRoute,
+		"SCI":    sciRoute,
+		"SMI":    smiRoute,
+		"NMI":    nmiRoute,
+	} {
+		if isRoute() {
+			ids = append(ids, routeid)
+		}
+	}
+
+	switch argc := len(ids); argc {
+	case 0:
+		dw1 := macro.Register(PAD_CFG_DW1)
+		isIOStandbyStateUsed := dw1.GetIOStandbyState() != 0
+		isIOStandbyTerminationUsed := dw1.GetIOStandbyTermination() != 0
+		if isIOStandbyStateUsed && !isIOStandbyTerminationUsed {
+			macro.Add("_TRIG_IOSSTATE_OWN(")
+			// PAD_CFG_GPI_TRIG_IOSSTATE_OWN(pad, pull, rst, trig, iosstate, own)
+			macro.Id().Pull().Rstsrc().Trig().IOSstate().Own().Add("),")
+		} else if isIOStandbyTerminationUsed {
+			macro.Add("_TRIG_IOS_OWN(")
+			// PAD_CFG_GPI_TRIG_IOS_OWN(pad, pull, rst, trig, iosstate, iosterm, own)
+			macro.Id().Pull().Rstsrc().Trig().IOSstate().IOTerm().Own().Add("),")
+		} else {
+			// PAD_CFG_GPI_TRIG_OWN(pad, pull, rst, trig, own)
+			macro.Add("_TRIG_OWN(").Id().Pull().Rstsrc().Trig().Own().Add("),")
+		}
+	case 1:
+		// GPI with IRQ route
+		if config.AreFieldsIgnored() {
+			macro.SetPadOwnership(common.PAD_OWN_ACPI)
+		}
+	case 2:
+		// PAD_CFG_GPI_DUAL_ROUTE(pad, pull, rst, trig, inv, route1, route2)
+		macro.Set("PAD_CFG_GPI_DUAL_ROUTE(").Id().Pull().Rstsrc().Trig().Invert()
+		macro.Add(", " + ids[0] + ", " + ids[1] + "),")
+		if config.AreFieldsIgnored() {
+			macro.SetPadOwnership(common.PAD_OWN_ACPI)
+		}
+	default:
+		// Clear the control mask so that the check fails and "Advanced" macro is
+		// generated
+		macro.Register(PAD_CFG_DW0).CntrMaskFieldsClear(common.AllFields)
+	}
+}
+
+
+// Adds PAD_CFG_GPO macro with arguments
+func (PlatformSpecific) GpoMacroAdd() {
+	macro := common.GetMacro()
+	dw0 :=  macro.Register(PAD_CFG_DW0)
+	dw1 :=  macro.Register(PAD_CFG_DW1)
+	term := dw1.GetTermination()
+
+	macro.Set("PAD_CFG")
+	if dw1.GetIOStandbyState() != 0 || dw1.GetIOStandbyTermination() != 0 {
+		// PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_91, 0, DEEP, NONE, Tx0RxDCRx0, DISPUPD),
+		// PAD_CFG_GPO_IOSSTATE_IOSTERM(pad, val, rst, pull, iosstate, ioterm)
+		macro.Add("_GPO_IOSSTATE_IOSTERM(").Id().Val().Rstsrc().Pull().IOSstate().IOTerm()
+	} else {
+		if term != 0 {
+			// e.g. PAD_CFG_TERM_GPO(GPP_B23, 1, DN_20K, DEEP),
+			// PAD_CFG_TERM_GPO(pad, val, pull, rst)
+			macro.Add("_TERM")
+		}
+		macro.Add("_GPO(").Id().Val()
+		if term != 0 {
+			macro.Pull()
+		}
+		macro.Rstsrc()
+	}
+	macro.Add("),")
+
+	if dw0.GetRXLevelEdgeConfiguration() != common.TRIG_OFF {
+		// ignore if trig = OFF is not set
+		dw0.CntrMaskFieldsClear(common.RxLevelEdgeConfigurationMask)
+	}
+}
+
+// Adds PAD_CFG_NF macro with arguments
+func (PlatformSpecific) NativeFunctionMacroAdd() {
+	macro := common.GetMacro()
+	dw1 := macro.Register(PAD_CFG_DW1)
+	isIOStandbyStateUsed := dw1.GetIOStandbyState() != 0
+	isIOStandbyTerminationUsed := dw1.GetIOStandbyTermination() != 0
+
+	macro.Set("PAD_CFG_NF")
+	if !isIOStandbyTerminationUsed && isIOStandbyStateUsed {
+		if dw1.GetIOStandbyState() == common.StandbyIgnore {
+			// PAD_CFG_NF_IOSTANDBY_IGNORE(PMU_SLP_S0_B, NONE, DEEP, NF1),
+			macro.Add("_IOSTANDBY_IGNORE(").Id().Pull().Rstsrc().Padfn()
+		} else {
+			// PAD_CFG_NF_IOSSTATE(GPIO_22, UP_20K, DEEP, NF2, TxDRxE),
+			macro.Add("_IOSSTATE(").Id().Pull().Rstsrc().Padfn().IOSstate()
+		}
+	} else if isIOStandbyTerminationUsed {
+		// PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_103, NATIVE, DEEP, NF1, MASK, SAME),
+		macro.Add("_IOSSTATE_IOSTERM(").Id().Pull().Rstsrc().Padfn().IOSstate().IOTerm()
+	} else {
+		// e.g. PAD_CFG_NF(GPP_D23, NONE, DEEP, NF1)
+		macro.Add("(").Id().Pull().Rstsrc().Padfn()
+	}
+	macro.Add("),")
+
+	if dw0 := macro.Register(PAD_CFG_DW0); dw0.GetGPIORxTxDisableStatus() != 0 {
+		// Since the bufbis parameter will be ignored for NF, we should clear
+		// the corresponding bits in the control mask.
+		dw0.CntrMaskFieldsClear(common.RxTxBufDisableMask)
+	}
+}
+
+// Adds PAD_NC macro
+func (PlatformSpecific) NoConnMacroAdd() {
+	macro := common.GetMacro()
+	dw1 := macro.Register(PAD_CFG_DW1)
+
+	if dw1.GetIOStandbyState() == common.TxDRxE {
+		dw0 := macro.Register(PAD_CFG_DW0)
+
+		// See comments in sunrise/macro.go : NoConnMacroAdd()
+		if dw0.GetRXLevelEdgeConfiguration() != common.TRIG_OFF {
+			dw0.CntrMaskFieldsClear(common.RxLevelEdgeConfigurationMask)
+		}
+		if dw0.GetResetConfig() != 1 { // 1 = RST_DEEP
+			dw0.CntrMaskFieldsClear(common.PadRstCfgMask)
+		}
+
+		// PAD_NC(OSC_CLK_OUT_1, DN_20K)
+		macro.Set("PAD_NC").Add("(").Id().Pull().Add("),")
+		return
+	}
+	// PAD_CFG_GPIO_HI_Z(GPIO_81, UP_20K, DEEP, HIZCRx0, DISPUPD),
+	macro.Set("PAD_CFG_GPIO_")
+	if macro.IsOwnershipDriver() {
+		// PAD_CFG_GPIO_DRIVER_HI_Z(GPIO_55, UP_20K, DEEP, HIZCRx1, ENPU),
+		macro.Add("DRIVER_")
+	}
+	macro.Add("HI_Z(").Id().Pull().Rstsrc().IOSstate().IOTerm().Add("),")
+}
+
+// GenMacro - generate pad macro
+// dw0 : DW0 config register value
+// dw1 : DW1 config register value
+// return: string of macro
+//         error
+func (PlatformSpecific) GenMacro(id string, dw0 uint32, dw1 uint32, ownership uint8) string {
+	macro := common.GetInstanceMacro(PlatformSpecific{}, fields.InterfaceGet())
+	// use platform-specific interface in Macro struct
+	macro.PadIdSet(id).SetPadOwnership(ownership)
+	macro.Register(PAD_CFG_DW0).CntrMaskFieldsClear(common.AllFields)
+	macro.Register(PAD_CFG_DW0).CntrMaskFieldsClear(common.AllFields)
+	macro.Register(PAD_CFG_DW0).ValueSet(dw0).ReadOnlyFieldsSet(PAD_CFG_DW0_RO_FIELDS)
+	macro.Register(PAD_CFG_DW1).ValueSet(dw1).ReadOnlyFieldsSet(PAD_CFG_DW1_RO_FIELDS)
+	return macro.Generate()
+}