diff options
Diffstat (limited to 'util/flashrom')
| -rw-r--r-- | util/flashrom/lbtable.c | 2 | ||||
| -rw-r--r-- | util/flashrom/linuxbios_tables.h | 216 |
2 files changed, 217 insertions, 1 deletions
diff --git a/util/flashrom/lbtable.c b/util/flashrom/lbtable.c index 82119b1294..2adf5c9c36 100644 --- a/util/flashrom/lbtable.c +++ b/util/flashrom/lbtable.c @@ -8,7 +8,7 @@ #include <errno.h> #include <sys/mman.h> #include "flash.h" -#include "../../src/include/boot/linuxbios_tables.h" +#include "linuxbios_tables.h" #include "debug.h" char *lb_part=NULL, *lb_vendor=NULL; diff --git a/util/flashrom/linuxbios_tables.h b/util/flashrom/linuxbios_tables.h new file mode 100644 index 0000000000..527c44d5fc --- /dev/null +++ b/util/flashrom/linuxbios_tables.h @@ -0,0 +1,216 @@ +#ifndef LINUXBIOS_TABLES_H +#define LINUXBIOS_TABLES_H + +#include <stdint.h> + +/* The linuxbios table information is for conveying information + * from the firmware to the loaded OS image. Primarily this + * is expected to be information that cannot be discovered by + * other means, such as quering the hardware directly. + * + * All of the information should be Position Independent Data. + * That is it should be safe to relocated any of the information + * without it's meaning/correctnes changing. For table that + * can reasonably be used on multiple architectures the data + * size should be fixed. This should ease the transition between + * 32 bit and 64 bit architectures etc. + * + * The completeness test for the information in this table is: + * - Can all of the hardware be detected? + * - Are the per motherboard constants available? + * - Is there enough to allow a kernel to run that was written before + * a particular motherboard is constructed? (Assuming the kernel + * has drivers for all of the hardware but it does not have + * assumptions on how the hardware is connected together). + * + * With this test it should be straight forward to determine if a + * table entry is required or not. This should remove much of the + * long term compatibility burden as table entries which are + * irrelevant or have been replaced by better alternatives may be + * dropped. Of course it is polite and expidite to include extra + * table entries and be backwards compatible, but it is not required. + */ + +/* Since LinuxBIOS is usually compiled 32bit, gcc will align 64bit + * types to 32bit boundaries. If the LinuxBIOS table is dumped on a + * 64bit system, a uint64_t would be aligned to 64bit boundaries, + * breaking the table format. + * + * lb_uint64 will keep 64bit LinuxBIOS table values aligned to 32bit + * to ensure compatibility. They can be accessed with the two functions + * below: unpack_lb64() and pack_lb64() + * + * See also: util/lbtdump/lbtdump.c + */ + +struct lb_uint64 { + uint32_t lo; + uint32_t hi; +}; + +static inline uint64_t unpack_lb64(struct lb_uint64 value) +{ + uint64_t result; + result = value.hi; + result = (result << 32) + value.lo; + return result; +} + +static inline struct lb_uint64 pack_lb64(uint64_t value) +{ + struct lb_uint64 result; + result.lo = (value >> 0) & 0xffffffff; + result.hi = (value >> 32) & 0xffffffff; + return result; +} + + + +struct lb_header +{ + uint8_t signature[4]; /* LBIO */ + uint32_t header_bytes; + uint32_t header_checksum; + uint32_t table_bytes; + uint32_t table_checksum; + uint32_t table_entries; +}; + +/* Every entry in the boot enviroment list will correspond to a boot + * info record. Encoding both type and size. The type is obviously + * so you can tell what it is. The size allows you to skip that + * boot enviroment record if you don't know what it easy. This allows + * forward compatibility with records not yet defined. + */ +struct lb_record { + uint32_t tag; /* tag ID */ + uint32_t size; /* size of record (in bytes) */ +}; + +#define LB_TAG_UNUSED 0x0000 + +#define LB_TAG_MEMORY 0x0001 + +struct lb_memory_range { + struct lb_uint64 start; + struct lb_uint64 size; + uint32_t type; +#define LB_MEM_RAM 1 /* Memory anyone can use */ +#define LB_MEM_RESERVED 2 /* Don't use this memory region */ +#define LB_MEM_TABLE 16 /* Ram configuration tables are kept in */ +}; + +struct lb_memory { + uint32_t tag; + uint32_t size; + struct lb_memory_range map[0]; +}; + +#define LB_TAG_HWRPB 0x0002 +struct lb_hwrpb { + uint32_t tag; + uint32_t size; + uint64_t hwrpb; +}; + +#define LB_TAG_MAINBOARD 0x0003 +struct lb_mainboard { + uint32_t tag; + uint32_t size; + uint8_t vendor_idx; + uint8_t part_number_idx; + uint8_t strings[0]; +}; + +#define LB_TAG_VERSION 0x0004 +#define LB_TAG_EXTRA_VERSION 0x0005 +#define LB_TAG_BUILD 0x0006 +#define LB_TAG_COMPILE_TIME 0x0007 +#define LB_TAG_COMPILE_BY 0x0008 +#define LB_TAG_COMPILE_HOST 0x0009 +#define LB_TAG_COMPILE_DOMAIN 0x000a +#define LB_TAG_COMPILER 0x000b +#define LB_TAG_LINKER 0x000c +#define LB_TAG_ASSEMBLER 0x000d +struct lb_string { + uint32_t tag; + uint32_t size; + uint8_t string[0]; +}; + +/* The following structures are for the cmos definitions table */ +#define LB_TAG_CMOS_OPTION_TABLE 200 +/* cmos header record */ +struct cmos_option_table { + uint32_t tag; /* CMOS definitions table type */ + uint32_t size; /* size of the entire table */ + uint32_t header_length; /* length of header */ +}; + +/* cmos entry record + This record is variable length. The name field may be + shorter than CMOS_MAX_NAME_LENGTH. The entry may start + anywhere in the byte, but can not span bytes unless it + starts at the beginning of the byte and the length is + fills complete bytes. +*/ +#define LB_TAG_OPTION 201 +struct cmos_entries { + uint32_t tag; /* entry type */ + uint32_t size; /* length of this record */ + uint32_t bit; /* starting bit from start of image */ + uint32_t length; /* length of field in bits */ + uint32_t config; /* e=enumeration, h=hex, r=reserved */ + uint32_t config_id; /* a number linking to an enumeration record */ +#define CMOS_MAX_NAME_LENGTH 32 + uint8_t name[CMOS_MAX_NAME_LENGTH]; /* name of entry in ascii, + variable length int aligned */ +}; + + +/* cmos enumerations record + This record is variable length. The text field may be + shorter than CMOS_MAX_TEXT_LENGTH. +*/ +#define LB_TAG_OPTION_ENUM 202 +struct cmos_enums { + uint32_t tag; /* enumeration type */ + uint32_t size; /* length of this record */ + uint32_t config_id; /* a number identifying the config id */ + uint32_t value; /* the value associated with the text */ +#define CMOS_MAX_TEXT_LENGTH 32 + uint8_t text[CMOS_MAX_TEXT_LENGTH]; /* enum description in ascii, + variable length int aligned */ +}; + +/* cmos defaults record + This record contains default settings for the cmos ram. +*/ +#define LB_TAG_OPTION_DEFAULTS 203 +struct cmos_defaults { + uint32_t tag; /* default type */ + uint32_t size; /* length of this record */ + uint32_t name_length; /* length of the following name field */ + uint8_t name[CMOS_MAX_NAME_LENGTH]; /* name identifying the default */ +#define CMOS_IMAGE_BUFFER_SIZE 128 + uint8_t default_set[CMOS_IMAGE_BUFFER_SIZE]; /* default settings */ +}; + +#define LB_TAG_OPTION_CHECKSUM 204 +struct cmos_checksum { + uint32_t tag; + uint32_t size; + /* In practice everything is byte aligned, but things are measured + * in bits to be consistent. + */ + uint32_t range_start; /* First bit that is checksummed (byte aligned) */ + uint32_t range_end; /* Last bit that is checksummed (byte aligned) */ + uint32_t location; /* First bit of the checksum (byte aligned) */ + uint32_t type; /* Checksum algorithm that is used */ +#define CHECKSUM_NONE 0 +#define CHECKSUM_PCBIOS 1 +}; + + + +#endif /* LINUXBIOS_TABLES_H */ |