diff options
Diffstat (limited to 'util/flashrom')
| -rw-r--r-- | util/flashrom/Makefile | 2 | ||||
| -rw-r--r-- | util/flashrom/flash.h | 12 | ||||
| -rw-r--r-- | util/flashrom/it87spi.c | 257 | ||||
| -rw-r--r-- | util/flashrom/spi.c | 238 |
4 files changed, 285 insertions, 224 deletions
diff --git a/util/flashrom/Makefile b/util/flashrom/Makefile index 9ea7d73491..2f0b290eae 100644 --- a/util/flashrom/Makefile +++ b/util/flashrom/Makefile @@ -24,7 +24,7 @@ OBJS = chipset_enable.o board_enable.o udelay.o jedec.o stm50flw0x0x.c \ sst28sf040.o am29f040b.o mx29f002.o sst39sf020.o m29f400bt.o \ w49f002u.o 82802ab.o msys_doc.o pm49fl004.o sst49lf040.o \ sst49lfxxxc.o sst_fwhub.o layout.o cbtable.o flashchips.o \ - flashrom.o w39v080fa.o sharplhf00l04.o w29ee011.o spi.o + flashrom.o w39v080fa.o sharplhf00l04.o w29ee011.o spi.o it87spi.o all: pciutils dep $(PROGRAM) diff --git a/util/flashrom/flash.h b/util/flashrom/flash.h index 6a1475e47b..b4ad94b7ee 100644 --- a/util/flashrom/flash.h +++ b/util/flashrom/flash.h @@ -360,6 +360,11 @@ void spi_write_disable(); int spi_chip_erase_c7(struct flashchip *flash); int spi_chip_write(struct flashchip *flash, uint8_t *buf); int spi_chip_read(struct flashchip *flash, uint8_t *buf); +uint8_t spi_read_status_register(); +void spi_disable_blockprotect(void); +void spi_byte_program(int address, uint8_t byte); +void spi_page_program(int block, uint8_t *buf, uint8_t *bios); +void spi_nbyte_read(int address, uint8_t *bytes, int len); /* 82802ab.c */ int probe_82802ab(struct flashchip *flash); @@ -371,6 +376,13 @@ int probe_29f040b(struct flashchip *flash); int erase_29f040b(struct flashchip *flash); int write_29f040b(struct flashchip *flash, uint8_t *buf); +/* it87spi.c */ +extern uint16_t it8716f_flashport; +int it8716f_spi_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); +int it8716f_spi_chip_read(struct flashchip *flash, uint8_t *buf); +int it8716f_spi_chip_write(struct flashchip *flash, uint8_t *buf); +void it8716f_spi_page_program(int block, uint8_t *buf, uint8_t *bios); + /* jedec.c */ void toggle_ready_jedec(volatile uint8_t *dst); void data_polling_jedec(volatile uint8_t *dst, uint8_t data); diff --git a/util/flashrom/it87spi.c b/util/flashrom/it87spi.c new file mode 100644 index 0000000000..1fd330913b --- /dev/null +++ b/util/flashrom/it87spi.c @@ -0,0 +1,257 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2007, 2008 Carl-Daniel Hailfinger + * Copyright (C) 2008 Ronald Hoogenboom <ronald@zonnet.nl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * Contains the ITE IT87* SPI specific routines + */ + +#include <stdio.h> +#include <pci/pci.h> +#include <stdint.h> +#include <string.h> +#include "flash.h" +#include "spi.h" + +#define ITE_SUPERIO_PORT1 0x2e +#define ITE_SUPERIO_PORT2 0x4e + + +uint16_t it8716f_flashport = 0; +/* use fast 33MHz SPI (<>0) or slow 16MHz (0) */ +int fast_spi = 1; + +/* Generic Super I/O helper functions */ +uint8_t regval(uint16_t port, uint8_t reg) +{ + outb(reg, port); + return inb(port + 1); +} + +void regwrite(uint16_t port, uint8_t reg, uint8_t val) +{ + outb(reg, port); + outb(val, port + 1); +} + +/* Helper functions for most recent ITE IT87xx Super I/O chips */ +#define CHIP_ID_BYTE1_REG 0x20 +#define CHIP_ID_BYTE2_REG 0x21 +static void enter_conf_mode_ite(uint16_t port) +{ + outb(0x87, port); + outb(0x01, port); + outb(0x55, port); + if (port == ITE_SUPERIO_PORT1) + outb(0x55, port); + else + outb(0xaa, port); +} + +static void exit_conf_mode_ite(uint16_t port) +{ + regwrite(port, 0x02, 0x02); +} + +static uint16_t find_ite_spi_flash_port(uint16_t port) +{ + uint8_t tmp = 0; + uint16_t id, flashport = 0; + + enter_conf_mode_ite(port); + + id = regval(port, CHIP_ID_BYTE1_REG) << 8; + id |= regval(port, CHIP_ID_BYTE2_REG); + + /* TODO: Handle more IT87xx if they support flash translation */ + if (id == 0x8716) { + /* NOLDN, reg 0x24, mask out lowest bit (suspend) */ + tmp = regval(port, 0x24) & 0xFE; + printf("Serial flash segment 0x%08x-0x%08x %sabled\n", + 0xFFFE0000, 0xFFFFFFFF, (tmp & 1 << 1) ? "en" : "dis"); + printf("Serial flash segment 0x%08x-0x%08x %sabled\n", + 0x000E0000, 0x000FFFFF, (tmp & 1 << 1) ? "en" : "dis"); + printf("Serial flash segment 0x%08x-0x%08x %sabled\n", + 0xFFEE0000, 0xFFEFFFFF, (tmp & 1 << 2) ? "en" : "dis"); + printf("Serial flash segment 0x%08x-0x%08x %sabled\n", + 0xFFF80000, 0xFFFEFFFF, (tmp & 1 << 3) ? "en" : "dis"); + printf("LPC write to serial flash %sabled\n", + (tmp & 1 << 4) ? "en" : "dis"); + printf("serial flash pin %i\n", (tmp & 1 << 5) ? 87 : 29); + /* LDN 0x7, reg 0x64/0x65 */ + regwrite(port, 0x07, 0x7); + flashport = regval(port, 0x64) << 8; + flashport |= regval(port, 0x65); + } + exit_conf_mode_ite(port); + return flashport; +} + +int it87xx_probe_spi_flash(const char *name) +{ + it8716f_flashport = find_ite_spi_flash_port(ITE_SUPERIO_PORT1); + if (!it8716f_flashport) + it8716f_flashport = find_ite_spi_flash_port(ITE_SUPERIO_PORT2); + return (!it8716f_flashport); +} + +/* The IT8716F only supports commands with length 1,2,4,5 bytes including + command byte and can not read more than 3 bytes from the device. + This function expects writearr[0] to be the first byte sent to the device, + whereas the IT8716F splits commands internally into address and non-address + commands with the address in inverse wire order. That's why the register + ordering in case 4 and 5 may seem strange. */ +int it8716f_spi_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr) +{ + uint8_t busy, writeenc; + int i; + + do { + busy = inb(it8716f_flashport) & 0x80; + } while (busy); + if (readcnt > 3) { + printf("%s called with unsupported readcnt %i.\n", + __FUNCTION__, readcnt); + return 1; + } + switch (writecnt) { + case 1: + outb(writearr[0], it8716f_flashport + 1); + writeenc = 0x0; + break; + case 2: + outb(writearr[0], it8716f_flashport + 1); + outb(writearr[1], it8716f_flashport + 7); + writeenc = 0x1; + break; + case 4: + outb(writearr[0], it8716f_flashport + 1); + outb(writearr[1], it8716f_flashport + 4); + outb(writearr[2], it8716f_flashport + 3); + outb(writearr[3], it8716f_flashport + 2); + writeenc = 0x2; + break; + case 5: + outb(writearr[0], it8716f_flashport + 1); + outb(writearr[1], it8716f_flashport + 4); + outb(writearr[2], it8716f_flashport + 3); + outb(writearr[3], it8716f_flashport + 2); + outb(writearr[4], it8716f_flashport + 7); + writeenc = 0x3; + break; + default: + printf("%s called with unsupported writecnt %i.\n", + __FUNCTION__, writecnt); + return 1; + } + /* Start IO, 33 or 16 MHz, readcnt input bytes, writecnt output bytes. + * Note: + * We can't use writecnt directly, but have to use a strange encoding. + */ + outb(((0x4 + (fast_spi ? 1 : 0)) << 4) | ((readcnt & 0x3) << 2) | (writeenc), it8716f_flashport); + + if (readcnt > 0) { + do { + busy = inb(it8716f_flashport) & 0x80; + } while (busy); + + for (i = 0; i < readcnt; i++) { + readarr[i] = inb(it8716f_flashport + 5 + i); + } + } + + return 0; +} + +/* Page size is usually 256 bytes */ +void it8716f_spi_page_program(int block, uint8_t *buf, uint8_t *bios) { + int i; + + spi_write_enable(); + outb(0x06 , it8716f_flashport + 1); + outb(((2 + (fast_spi ? 1 : 0)) << 4), it8716f_flashport); + for (i = 0; i < 256; i++) { + bios[256 * block + i] = buf[256 * block + i]; + } + outb(0, it8716f_flashport); + /* Wait until the Write-In-Progress bit is cleared. + * This usually takes 1-10 ms, so wait in 1 ms steps. + */ + while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) + usleep(1000); +} + +/* + * IT8716F only allows maximum of 512 kb SPI mapped to LPC memory cycles + * Program chip using firmware cycle byte programming. (SLOW!) + */ +int it8716f_over512k_spi_chip_write(struct flashchip *flash, uint8_t *buf) +{ + int total_size = 1024 * flash->total_size; + int i; + fast_spi = 0; + + spi_disable_blockprotect(); + for (i = 0; i < total_size; i++) { + spi_write_enable(); + spi_byte_program(i, buf[i]); + while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) + myusec_delay(10); + } + /* resume normal ops... */ + outb(0x20, it8716f_flashport); + return 0; +} + +/* + * IT8716F only allows maximum of 512 kb SPI mapped to LPC memory cycles + * Need to read this big flash using firmware cycles 3 byte at a time. + */ +int it8716f_spi_chip_read(struct flashchip *flash, uint8_t *buf) +{ + int total_size = 1024 * flash->total_size; + int i; + fast_spi = 0; + + if (total_size > 512 * 1024) { + for (i = 0; i < total_size; i += 3) { + int toread = 3; + if (total_size - i < toread) + toread = total_size - i; + spi_nbyte_read(i, buf + i, toread); + } + } else { + memcpy(buf, (const char *)flash->virtual_memory, total_size); + } + return 0; +} + +int it8716f_spi_chip_write(struct flashchip *flash, uint8_t *buf) { + int total_size = 1024 * flash->total_size; + int i; + if (total_size > 512 * 1024) { + it8716f_over512k_spi_chip_write(flash, buf); + } else { + for (i = 0; i < total_size / 256; i++) { + spi_page_program(i, buf, (uint8_t *)flash->virtual_memory); + } + } + return 0; +} + diff --git a/util/flashrom/spi.c b/util/flashrom/spi.c index cba6942209..5cfc052103 100644 --- a/util/flashrom/spi.c +++ b/util/flashrom/spi.c @@ -2,7 +2,6 @@ * This file is part of the flashrom project. * * Copyright (C) 2007, 2008 Carl-Daniel Hailfinger - * Copyright (C) 2008 Ronald Hoogenboom <ronald@zonnet.nl> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -29,158 +28,8 @@ #include "flash.h" #include "spi.h" -#define ITE_SUPERIO_PORT1 0x2e -#define ITE_SUPERIO_PORT2 0x4e - - -uint16_t it8716f_flashport = 0; -/* use fast 33MHz SPI (<>0) or slow 16MHz (0) */ -int fast_spi = 1; void spi_prettyprint_status_register(struct flashchip *flash); -void spi_disable_blockprotect(void); - -/* Generic Super I/O helper functions */ -uint8_t regval(uint16_t port, uint8_t reg) -{ - outb(reg, port); - return inb(port + 1); -} - -void regwrite(uint16_t port, uint8_t reg, uint8_t val) -{ - outb(reg, port); - outb(val, port + 1); -} - -/* Helper functions for most recent ITE IT87xx Super I/O chips */ -#define CHIP_ID_BYTE1_REG 0x20 -#define CHIP_ID_BYTE2_REG 0x21 -static void enter_conf_mode_ite(uint16_t port) -{ - outb(0x87, port); - outb(0x01, port); - outb(0x55, port); - if (port == ITE_SUPERIO_PORT1) - outb(0x55, port); - else - outb(0xaa, port); -} - -static void exit_conf_mode_ite(uint16_t port) -{ - regwrite(port, 0x02, 0x02); -} - -static uint16_t find_ite_spi_flash_port(uint16_t port) -{ - uint8_t tmp = 0; - uint16_t id, flashport = 0; - - enter_conf_mode_ite(port); - - id = regval(port, CHIP_ID_BYTE1_REG) << 8; - id |= regval(port, CHIP_ID_BYTE2_REG); - - /* TODO: Handle more IT87xx if they support flash translation */ - if (id == 0x8716) { - /* NOLDN, reg 0x24, mask out lowest bit (suspend) */ - tmp = regval(port, 0x24) & 0xFE; - printf("Serial flash segment 0x%08x-0x%08x %sabled\n", - 0xFFFE0000, 0xFFFFFFFF, (tmp & 1 << 1) ? "en" : "dis"); - printf("Serial flash segment 0x%08x-0x%08x %sabled\n", - 0x000E0000, 0x000FFFFF, (tmp & 1 << 1) ? "en" : "dis"); - printf("Serial flash segment 0x%08x-0x%08x %sabled\n", - 0xFFEE0000, 0xFFEFFFFF, (tmp & 1 << 2) ? "en" : "dis"); - printf("Serial flash segment 0x%08x-0x%08x %sabled\n", - 0xFFF80000, 0xFFFEFFFF, (tmp & 1 << 3) ? "en" : "dis"); - printf("LPC write to serial flash %sabled\n", - (tmp & 1 << 4) ? "en" : "dis"); - printf("serial flash pin %i\n", (tmp & 1 << 5) ? 87 : 29); - /* LDN 0x7, reg 0x64/0x65 */ - regwrite(port, 0x07, 0x7); - flashport = regval(port, 0x64) << 8; - flashport |= regval(port, 0x65); - } - exit_conf_mode_ite(port); - return flashport; -} - -int it87xx_probe_spi_flash(const char *name) -{ - it8716f_flashport = find_ite_spi_flash_port(ITE_SUPERIO_PORT1); - if (!it8716f_flashport) - it8716f_flashport = find_ite_spi_flash_port(ITE_SUPERIO_PORT2); - return (!it8716f_flashport); -} - -/* The IT8716F only supports commands with length 1,2,4,5 bytes including - command byte and can not read more than 3 bytes from the device. - This function expects writearr[0] to be the first byte sent to the device, - whereas the IT8716F splits commands internally into address and non-address - commands with the address in inverse wire order. That's why the register - ordering in case 4 and 5 may seem strange. */ -static int it8716f_spi_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr) -{ - uint8_t busy, writeenc; - int i; - - do { - busy = inb(it8716f_flashport) & 0x80; - } while (busy); - if (readcnt > 3) { - printf("%s called with unsupported readcnt %i.\n", - __FUNCTION__, readcnt); - return 1; - } - switch (writecnt) { - case 1: - outb(writearr[0], it8716f_flashport + 1); - writeenc = 0x0; - break; - case 2: - outb(writearr[0], it8716f_flashport + 1); - outb(writearr[1], it8716f_flashport + 7); - writeenc = 0x1; - break; - case 4: - outb(writearr[0], it8716f_flashport + 1); - outb(writearr[1], it8716f_flashport + 4); - outb(writearr[2], it8716f_flashport + 3); - outb(writearr[3], it8716f_flashport + 2); - writeenc = 0x2; - break; - case 5: - outb(writearr[0], it8716f_flashport + 1); - outb(writearr[1], it8716f_flashport + 4); - outb(writearr[2], it8716f_flashport + 3); - outb(writearr[3], it8716f_flashport + 2); - outb(writearr[4], it8716f_flashport + 7); - writeenc = 0x3; - break; - default: - printf("%s called with unsupported writecnt %i.\n", - __FUNCTION__, writecnt); - return 1; - } - /* Start IO, 33 or 16 MHz, readcnt input bytes, writecnt output bytes. - * Note: - * We can't use writecnt directly, but have to use a strange encoding. - */ - outb(((0x4 + (fast_spi ? 1 : 0)) << 4) | ((readcnt & 0x3) << 2) | (writeenc), it8716f_flashport); - - if (readcnt > 0) { - do { - busy = inb(it8716f_flashport) & 0x80; - } while (busy); - - for (i = 0; i < readcnt; i++) { - readarr[i] = inb(it8716f_flashport + 5 + i); - } - } - - return 0; -} int spi_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr) { @@ -390,28 +239,13 @@ int spi_sector_erase(const struct flashchip *flash, unsigned long addr) return 0; } -/* Page size is usually 256 bytes */ -void it8716f_spi_page_program(int block, uint8_t *buf, uint8_t *bios) { - int i; - - spi_write_enable(); - outb(0x06 , it8716f_flashport + 1); - outb(((2 + (fast_spi ? 1 : 0)) << 4), it8716f_flashport); - for (i = 0; i < 256; i++) { - bios[256 * block + i] = buf[256 * block + i]; - } - outb(0, it8716f_flashport); - /* Wait until the Write-In-Progress bit is cleared. - * This usually takes 1-10 ms, so wait in 1 ms steps. - */ - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) - usleep(1000); -} - void spi_page_program(int block, uint8_t *buf, uint8_t *bios) { - if (it8716f_flashport) + if (it8716f_flashport) { it8716f_spi_page_program(block, buf, bios); + return; + } + printf_debug("%s called, but no SPI chipset detected\n", __FUNCTION__); } /* @@ -452,29 +286,7 @@ void spi_disable_blockprotect(void) } } -/* - * IT8716F only allows maximum of 512 kb SPI mapped to LPC memory cycles - * Program chip using firmware cycle byte programming. (SLOW!) - */ -int it8716f_over512k_spi_chip_write(struct flashchip *flash, uint8_t *buf) -{ - int total_size = 1024 * flash->total_size; - int i; - fast_spi = 0; - - spi_disable_blockprotect(); - for (i = 0; i < total_size; i++) { - spi_write_enable(); - spi_byte_program(i, buf[i]); - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) - myusec_delay(10); - } - /* resume normal ops... */ - outb(0x20, it8716f_flashport); - return 0; -} - -void spi_3byte_read(int address, uint8_t *bytes, int len) +void spi_nbyte_read(int address, uint8_t *bytes, int len) { const unsigned char cmd[JEDEC_READ_OUTSIZE] = {JEDEC_READ, (address >> 16) & 0xff, @@ -486,39 +298,19 @@ void spi_3byte_read(int address, uint8_t *bytes, int len) spi_command(JEDEC_READ_OUTSIZE, len, cmd, bytes); } -/* - * IT8716F only allows maximum of 512 kb SPI mapped to LPC memory cycles - * Need to read this big flash using firmware cycles 3 byte at a time. - */ int spi_chip_read(struct flashchip *flash, uint8_t *buf) { - int total_size = 1024 * flash->total_size; - int i; - fast_spi = 0; - - if (total_size > 512 * 1024) { - for (i = 0; i < total_size; i += 3) { - int toread = 3; - if (total_size - i < toread) - toread = total_size - i; - spi_3byte_read(i, buf + i, toread); - } - } else { - memcpy(buf, (const char *)flash->virtual_memory, total_size); - } - return 0; + if (it8716f_flashport) + return it8716f_spi_chip_read(flash, buf); + printf_debug("%s called, but no SPI chipset detected\n", __FUNCTION__); + return 1; } -int spi_chip_write(struct flashchip *flash, uint8_t *buf) { - int total_size = 1024 * flash->total_size; - int i; - if (total_size > 512 * 1024) { - it8716f_over512k_spi_chip_write(flash, buf); - } else { - for (i = 0; i < total_size / 256; i++) { - spi_page_program(i, buf, (uint8_t *)flash->virtual_memory); - } - } - return 0; +int spi_chip_write(struct flashchip *flash, uint8_t *buf) +{ + if (it8716f_flashport) + return it8716f_spi_chip_write(flash, buf); + printf_debug("%s called, but no SPI chipset detected\n", __FUNCTION__); + return 1; } |