1 files changed, 0 insertions, 103 deletions
diff --git a/util/flashrom/sst_fwhub.c b/util/flashrom/sst_fwhub.c
deleted file mode 100644
index ab541e41f8..0000000000
--- a/util/flashrom/sst_fwhub.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * This file is part of the flashrom project.
- *
- * Copyright (C) 2000 Silicon Integrated System Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
- */
-
-/* Adapted from the Intel FW hub stuff for 82802ax parts. */
-
-#include <stdio.h>
-#include "flash.h"
-
-// I need that Berkeley bit-map printer
-void print_sst_fwhub_status(uint8_t status)
-{
-	printf("%s", status & 0x80 ? "Ready:" : "Busy:");
-	printf("%s", status & 0x40 ? "BE SUSPEND:" : "BE RUN/FINISH:");
-	printf("%s", status & 0x20 ? "BE ERROR:" : "BE OK:");
-	printf("%s", status & 0x10 ? "PROG ERR:" : "PROG OK:");
-	printf("%s", status & 0x8 ? "VP ERR:" : "VPP OK:");
-	printf("%s", status & 0x4 ? "PROG SUSPEND:" : "PROG RUN/FINISH:");
-	printf("%s", status & 0x2 ? "WP|TBL#|WP#,ABORT:" : "UNLOCK:");
-}
-
-/* probe_jedec works fine for probing */
-int probe_sst_fwhub(struct flashchip *flash)
-{
-	if (probe_jedec(flash) == 0)
-		return 0;
-
-	map_flash_registers(flash);
-
-	return 1;
-}
-
-int erase_sst_fwhub_block(struct flashchip *flash, int offset)
-{
-	volatile uint8_t *wrprotect = flash->virtual_registers + offset + 2;
-
-	// clear write protect
-	chip_writeb(0, wrprotect);
-
-	erase_block_jedec(flash->virtual_memory, offset);
-	toggle_ready_jedec(flash->virtual_memory);
-
-	return 0;
-}
-
-int erase_sst_fwhub(struct flashchip *flash)
-{
-	int i;
-	unsigned int total_size = flash->total_size * 1024;
-	volatile uint8_t *bios = flash->virtual_memory;
-
-	for (i = 0; i < total_size; i += flash->page_size)
-		erase_sst_fwhub_block(flash, i);
-
-	// dumb check if erase was successful.
-	for (i = 0; i < total_size; i++) {
-		if (bios[i] != 0xff) {
-			printf("ERASE FAILED!\n");
-			return -1;
-		}
-	}
-
-	return 0;
-}
-
-int write_sst_fwhub(struct flashchip *flash, uint8_t *buf)
-{
-	int i;
-	int total_size = flash->total_size * 1024;
-	int page_size = flash->page_size;
-	volatile uint8_t *bios = flash->virtual_memory;
-
-	// FIXME: We want block wide erase instead of ironing the whole chip
-	if (erase_sst_fwhub(flash))
-		return -1;
-
-	printf("Programming page: ");
-	for (i = 0; i < total_size / page_size; i++) {
-		printf("%04d at address: 0x%08x", i, i * page_size);
-		write_sector_jedec(bios, buf + i * page_size,
-				   bios + i * page_size, page_size);
-		printf("\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b");
-	}
-	printf("\n");
-
-	return 0;
-}