summaryrefslogtreecommitdiff
path: root/util/flashrom/spi.c
diff options
context:
space:
mode:
Diffstat (limited to 'util/flashrom/spi.c')
-rw-r--r--util/flashrom/spi.c79
1 files changed, 70 insertions, 9 deletions
diff --git a/util/flashrom/spi.c b/util/flashrom/spi.c
index 26c0d4a023..8467664137 100644
--- a/util/flashrom/spi.c
+++ b/util/flashrom/spi.c
@@ -45,17 +45,31 @@
#define JEDEC_WRDI_OUTSIZE 0x01
#define JEDEC_WRDI_INSIZE 0x00
-/* Both Chip Erase commands below should work */
-/* Chip Erase 0x60 */
+/* Chip Erase 0x60 is supported by Macronix/SST chips. */
#define JEDEC_CE_1 {0x60};
#define JEDEC_CE_1_OUTSIZE 0x01
#define JEDEC_CE_1_INSIZE 0x00
-/* Chip Erase 0xc7 */
+/* Chip Erase 0xc7 is supported by EON/Macronix chips. */
#define JEDEC_CE_2 {0xc7};
#define JEDEC_CE_2_OUTSIZE 0x01
#define JEDEC_CE_2_INSIZE 0x00
+/* Block Erase 0x52 is supported by SST chips. */
+#define JEDEC_BE_1 {0x52};
+#define JEDEC_BE_1_OUTSIZE 0x04
+#define JEDEC_BE_1_INSIZE 0x00
+
+/* Block Erase 0xd8 is supported by EON/Macronix chips. */
+#define JEDEC_BE_2 {0xd8};
+#define JEDEC_BE_2_OUTSIZE 0x04
+#define JEDEC_BE_2_INSIZE 0x00
+
+/* Sector Erase 0x20 is supported by Macronix/SST chips. */
+#define JEDEC_SE {0x20};
+#define JEDEC_SE_OUTSIZE 0x04
+#define JEDEC_SE_INSIZE 0x00
+
/* Read Status Register */
#define JEDEC_RDSR {0x05};
#define JEDEC_RDSR_OUTSIZE 0x01
@@ -144,7 +158,7 @@ int it87xx_probe_spi_flash(const char *name)
whereas the IT8716F splits commands internally into address and non-address
commands with the address in inverse wire order. That's why the register
ordering in case 4 and 5 may seem strange. */
-static int it8716f_spi_command(uint16_t port, unsigned char writecnt, unsigned char readcnt, const unsigned char *writearr, unsigned char *readarr)
+static int it8716f_spi_command(uint16_t port, unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr)
{
uint8_t busy, writeenc;
int i;
@@ -188,7 +202,7 @@ static int it8716f_spi_command(uint16_t port, unsigned char writecnt, unsigned c
return 1;
}
/* Start IO, 33MHz, readcnt input bytes, writecnt output bytes. Note:
- * We can't use writecnt directly, but have to use a strange encoding
+ * We can't use writecnt directly, but have to use a strange encoding.
*/
outb((0x5 << 4) | ((readcnt & 0x3) << 2) | (writeenc), port);
do {
@@ -202,7 +216,7 @@ static int it8716f_spi_command(uint16_t port, unsigned char writecnt, unsigned c
return 0;
}
-int generic_spi_command(unsigned char writecnt, unsigned char readcnt, const unsigned char *writearr, unsigned char *readarr)
+int generic_spi_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr)
{
if (it8716f_flashport)
return it8716f_spi_command(it8716f_flashport, writecnt, readcnt, writearr, readarr);
@@ -269,13 +283,58 @@ int generic_spi_chip_erase(struct flashchip *flash)
generic_spi_write_enable();
/* Send CE (Chip Erase) */
- generic_spi_command(1, 0, cmd, NULL);
- /* Wait until the Write-In-Progress bit is cleared */
+ generic_spi_command(JEDEC_CE_2_OUTSIZE, JEDEC_CE_2_INSIZE, cmd, NULL);
+ /* Wait until the Write-In-Progress bit is cleared.
+ * This usually takes 1-85 s, so wait in 1 s steps.
+ */
while (generic_spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
sleep(1);
return 0;
}
+/* Block size is usually
+ * 64k for Macronix
+ * 32k for SST
+ * 4-32k non-uniform for EON
+ */
+int generic_spi_block_erase(const struct flashchip *flash, unsigned long addr)
+{
+ unsigned char cmd[JEDEC_BE_2_OUTSIZE] = JEDEC_BE_2;
+
+ cmd[1] = (addr & 0x00ff0000) >> 16;
+ cmd[2] = (addr & 0x0000ff00) >> 8;
+ cmd[3] = (addr & 0x000000ff);
+ generic_spi_write_enable();
+ /* Send BE (Block Erase) */
+ generic_spi_command(JEDEC_BE_2_OUTSIZE, JEDEC_BE_2_INSIZE, cmd, NULL);
+ /* Wait until the Write-In-Progress bit is cleared.
+ * This usually takes 100-4000 ms, so wait in 100 ms steps.
+ */
+ while (generic_spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
+ usleep(100 * 1000);
+ return 0;
+}
+
+/* Sector size is usually 4k, though Macronix eliteflash has 64k */
+int generic_spi_sector_erase(const struct flashchip *flash, unsigned long addr)
+{
+ unsigned char cmd[JEDEC_SE_OUTSIZE] = JEDEC_SE;
+ cmd[1] = (addr & 0x00ff0000) >> 16;
+ cmd[2] = (addr & 0x0000ff00) >> 8;
+ cmd[3] = (addr & 0x000000ff);
+
+ generic_spi_write_enable();
+ /* Send SE (Sector Erase) */
+ generic_spi_command(JEDEC_SE_OUTSIZE, JEDEC_SE_INSIZE, cmd, NULL);
+ /* Wait until the Write-In-Progress bit is cleared.
+ * This usually takes 15-800 ms, so wait in 10 ms steps.
+ */
+ while (generic_spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
+ usleep(10 * 1000);
+ return 0;
+}
+
+/* Page size is usually 256 bytes */
void it8716f_spi_page_program(int block, uint8_t *buf, uint8_t *bios) {
int i;
@@ -286,7 +345,9 @@ void it8716f_spi_page_program(int block, uint8_t *buf, uint8_t *bios) {
bios[256 * block + i] = buf[256 * block + i];
}
outb(0, it8716f_flashport);
- /* Wait until the Write-In-Progress bit is cleared */
+ /* Wait until the Write-In-Progress bit is cleared.
+ * This usually takes 1-10 ms, so wait in 1 ms steps.
+ */
while (generic_spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
usleep(1000);
}