diff options
Diffstat (limited to 'util/flash_and_burn/82802ab.c')
| -rw-r--r-- | util/flash_and_burn/82802ab.c | 199 |
1 files changed, 199 insertions, 0 deletions
diff --git a/util/flash_and_burn/82802ab.c b/util/flash_and_burn/82802ab.c new file mode 100644 index 0000000000..c818e92151 --- /dev/null +++ b/util/flash_and_burn/82802ab.c @@ -0,0 +1,199 @@ +/* + * 82802ab.c: driver for programming JEDEC standard flash parts + * + * + * Copyright 2000 Silicon Integrated System Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * Reference: http://www.intel.com/design/chipsets/datashts/290658.htm + * + * $Id$ + */ + +#include <errno.h> +#include <fcntl.h> +#include <sys/mman.h> +#include <sys/io.h> +#include <unistd.h> +#include <stdio.h> +#include <stdlib.h> + +#include "flash.h" +#include "82802ab.h" + +// I need that Berkeley bit-map printer +void print_82802ab_status(unsigned char status) +{ + printf("%s", status & 0x80 ? "Ready:" : "Busy:"); + printf("%s", status & 0x40 ? "BE SUSPEND:" : "BE RUN/FINISH:"); + printf("%s", status & 0x20 ? "BE ERROR:" : "BE OK:"); + printf("%s", status & 0x10 ? "PROG ERR:" : "PROG OK:"); + printf("%s", status & 0x8 ? "VP ERR:" : "VPP OK:"); + printf("%s", status & 0x4 ? "PROG SUSPEND:" : "PROG RUN/FINISH:"); + printf("%s", status & 0x2 ? "WP|TBL#|WP#,ABORT:" : "UNLOCK:"); +} + +int probe_82802ab (struct flashchip * flash) +{ + volatile unsigned char * bios = flash->virt_addr; + unsigned char id1, id2; + +#if 0 + *(volatile unsigned char *) (bios + 0x5555) = 0xAA; + *(volatile unsigned char *) (bios + 0x2AAA) = 0x55; + *(volatile unsigned char *) (bios + 0x5555) = 0x90; +#endif + + *bios = 0xff; + myusec_delay(10); + *bios = 0x90; + myusec_delay(10); + + id1 = *(volatile unsigned char *) bios; + id2 = *(volatile unsigned char *) (bios + 0x01); + +#if 1 + *(volatile unsigned char *) (bios + 0x5555) = 0xAA; + *(volatile unsigned char *) (bios + 0x2AAA) = 0x55; + *(volatile unsigned char *) (bios + 0x5555) = 0xF0; + +#endif + myusec_delay(10); + + printf("%s: id1 0x%x, id2 0x%x\n", __FUNCTION__, id1, id2); + + if (id1 == flash->manufacture_id && id2 == flash->model_id) { + size_t size = flash->total_size * 1024; + // we need to mmap the write-protect space. + bios = mmap (0, size, PROT_WRITE | PROT_READ, MAP_SHARED, + flash->fd_mem, (off_t) (0 - 0x400000 - size)); + if (bios == MAP_FAILED) { + // it's this part but we can't map it ... + perror("Error MMAP /dev/mem"); + exit(1); + } + + flash->virt_addr_2 = bios; + return 1; + } + + return 0; +} + +unsigned char wait_82802ab(volatile unsigned char * bios) +{ + + unsigned char status; + unsigned char id1, id2; + + *bios = 0x70; + if ((*bios & 0x80) == 0) { // it's busy + while ((*bios & 0x80) == 0) + ; + } + + status = *bios; + + // put another command to get out of status register mode + + *bios = 0x90; + myusec_delay(10); + + id1 = *(volatile unsigned char *) bios; + id2 = *(volatile unsigned char *) (bios + 0x01); + + // this is needed to jam it out of "read id" mode + *(volatile unsigned char *) (bios + 0x5555) = 0xAA; + *(volatile unsigned char *) (bios + 0x2AAA) = 0x55; + *(volatile unsigned char *) (bios + 0x5555) = 0xF0; + return status; + +} +int erase_82802ab_block(struct flashchip *flash, int offset) +{ + volatile unsigned char * bios = flash->virt_addr + offset; + volatile unsigned char *wrprotect = flash->virt_addr_2 + offset + 2; + unsigned char status; + + // clear status register + *bios = 0x50; + //printf("Erase at %p\n", bios); + // clear write protect + //printf("write protect is at %p\n", (wrprotect)); + //printf("write protect is 0x%x\n", *(wrprotect)); + *(wrprotect) = 0; + //printf("write protect is 0x%x\n", *(wrprotect)); + + // now start it + *(volatile unsigned char *) (bios) = 0x20; + *(volatile unsigned char *) (bios) = 0xd0; + myusec_delay(10); + // now let's see what the register is + status = wait_82802ab(flash->virt_addr); + //print_82802ab_status(status); + printf("DONE BLOCK 0x%x\n", offset); + return(0); +} +int erase_82802ab (struct flashchip * flash) +{ + int i; + unsigned int total_size = flash->total_size * 1024; + + printf("total_size is %d; flash->page_size is %d\n", + total_size, flash->page_size); + for(i = 0; i < total_size; i += flash->page_size) + erase_82802ab_block(flash, i); + printf("DONE ERASE\n"); + return(0); +} + +void write_page_82802ab (volatile char * bios, char * src, volatile char * dst, + int page_size) +{ + int i; + + for (i = 0; i < page_size; i++) { + /* transfer data from source to destination */ + *dst = 0x40; + *dst++ = *src++; + wait_82802ab(bios); + } + +} + +int write_82802ab (struct flashchip * flash, unsigned char * buf) +{ + int i; + int total_size = flash->total_size *1024, page_size = flash->page_size; + volatile unsigned char * bios = flash->virt_addr; + + erase_82802ab (flash); + if (*bios != 0xff) { + printf("ERASE FAILED\n"); + return -1; + } + printf ("Programming Page: "); + for (i = 0; i < total_size/page_size; i++) { + printf ("%04d at address: 0x%08x", i, i * page_size); + write_page_82802ab(bios, buf + i * page_size, bios + i * page_size, + page_size); + printf ("\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b"); + } + printf("\n"); + protect_82802ab (bios); + return(0); +} |