diff options
Diffstat (limited to 'targets')
| -rw-r--r-- | targets/arima/hdama/Config.kernelimage.lb | 103 | ||||
| -rw-r--r-- | targets/arima/hdama/Config.lb | 4 | ||||
| -rw-r--r-- | targets/via/epia/Config.lb | 107 |
3 files changed, 214 insertions, 0 deletions
diff --git a/targets/arima/hdama/Config.kernelimage.lb b/targets/arima/hdama/Config.kernelimage.lb new file mode 100644 index 0000000000..8022ba6233 --- /dev/null +++ b/targets/arima/hdama/Config.kernelimage.lb @@ -0,0 +1,103 @@ +# Sample config file for Motorola Sandpoint X3 Demo Board with +# the Arima HDAMA +# This will make a target directory of ./hdama + +loadoptions + +target hdama + +uses ARCH +uses CONFIG_COMPRESS +uses CONFIG_IOAPIC +uses CONFIG_ROM_STREAM +uses CONFIG_ROM_STREAM_START +uses CONFIG_UDELAY_TSC +uses CPU_FIXUP +uses FALLBACK_SIZE +uses HAVE_FALLBACK_BOOT +uses HAVE_MP_TABLE +uses HAVE_PIRQ_TABLE +uses HAVE_HARD_RESET +uses i586 +uses i686 +uses INTEL_PPRO_MTRR +uses HEAP_SIZE +uses IRQ_SLOT_COUNT +uses k7 +uses k8 +uses MAINBOARD_PART_NUMBER +uses MAINBOARD_VENDOR +uses CONFIG_SMP +uses CONFIG_MAX_CPUS +uses MEMORY_HOLE +uses PAYLOAD_SIZE +uses _RAMBASE +uses _ROMBASE +uses ROM_IMAGE_SIZE +uses ROM_SECTION_OFFSET +uses ROM_SECTION_SIZE +uses ROM_SIZE +uses STACK_SIZE +uses USE_FALLBACK_IMAGE +uses USE_OPTION_TABLE +uses HAVE_OPTION_TABLE +uses MAXIMUM_CONSOLE_LOGLEVEL +uses DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_CONSOLE_SERIAL8250 +uses MAINBOARD +uses CONFIG_CHIP_CONFIGURE +uses XIP_ROM_SIZE +uses XIP_ROM_BASE +uses LINUXBIOS_EXTRA_VERSION + +option CONFIG_CHIP_CONFIGURE=1 + +option MAXIMUM_CONSOLE_LOGLEVEL=8 +option DEFAULT_CONSOLE_LOGLEVEL=8 +option CONFIG_CONSOLE_SERIAL8250=1 + +option CPU_FIXUP=1 +option CONFIG_UDELAY_TSC=0 +option i686=1 +option i586=1 +option INTEL_PPRO_MTRR=1 +option k7=1 +option k8=1 + +option ROM_SIZE=0x100000 + + +option HAVE_OPTION_TABLE=1 +option CONFIG_ROM_STREAM=1 +option HAVE_FALLBACK_BOOT=1 + +### +### Compute the location and size of where this firmware image +### (linuxBIOS plus bootloader) will live in the boot rom chip. +### +option FALLBACK_SIZE=ROM_SIZE + +## LinuxBIOS C code runs at this location in RAM +option _RAMBASE=0x00004000 + +# +### +### Compute the start location and size size of +### The linuxBIOS bootloader. +### + +# +# Arima hdama +romimage "fallback" + option USE_FALLBACK_IMAGE=1 + option ROM_IMAGE_SIZE=0x10000 +# option ROM_SECTION_SIZE=0x100000 + option LINUXBIOS_EXTRA_VERSION=".0Fallback" + mainboard arima/hdama + payload ../../../../tg3--ide_disk.zelf +# payload ../../../../opteron_phase1_p4_noapic +# payload ../../../../../../hdama-1 +# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf +end + +buildrom ROM_SIZE "fallback" diff --git a/targets/arima/hdama/Config.lb b/targets/arima/hdama/Config.lb index 7ea925d2d1..6c74ee6207 100644 --- a/targets/arima/hdama/Config.lb +++ b/targets/arima/hdama/Config.lb @@ -94,6 +94,8 @@ romimage "normal" option LINUXBIOS_EXTRA_VERSION=".0Normal" mainboard arima/hdama payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf +# use this to test a build if you don't have the etherboot +# payload /etc/hosts end romimage "fallback" @@ -102,6 +104,8 @@ romimage "fallback" option LINUXBIOS_EXTRA_VERSION=".0Fallback" mainboard arima/hdama payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf +# use this to test a build if you don't have the etherboot +# payload /etc/hosts end buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" diff --git a/targets/via/epia/Config.lb b/targets/via/epia/Config.lb new file mode 100644 index 0000000000..da433f4486 --- /dev/null +++ b/targets/via/epia/Config.lb @@ -0,0 +1,107 @@ +# Sample config file for Motorola Sandpoint X3 Demo Board with +# the Arima HDAMA +# This will make a target directory of ./hdama + +loadoptions + +target epia + +uses ARCH +uses CONFIG_COMPRESS +uses CONFIG_IOAPIC +uses CONFIG_ROM_STREAM +uses CONFIG_ROM_STREAM_START +uses CONFIG_UDELAY_TSC +uses CPU_FIXUP +uses FALLBACK_SIZE +uses HAVE_FALLBACK_BOOT +uses HAVE_MP_TABLE +uses HAVE_PIRQ_TABLE +uses HAVE_HARD_RESET +uses i586 +uses i686 +uses INTEL_PPRO_MTRR +uses HEAP_SIZE +uses IRQ_SLOT_COUNT +uses k7 +uses k8 +uses MAINBOARD_PART_NUMBER +uses MAINBOARD_VENDOR +uses CONFIG_SMP +uses CONFIG_MAX_CPUS +uses MEMORY_HOLE +uses PAYLOAD_SIZE +uses _RAMBASE +uses _ROMBASE +uses ROM_IMAGE_SIZE +uses ROM_SECTION_OFFSET +uses ROM_SECTION_SIZE +uses ROM_SIZE +uses STACK_SIZE +uses USE_FALLBACK_IMAGE +uses USE_OPTION_TABLE +uses HAVE_OPTION_TABLE +uses MAXIMUM_CONSOLE_LOGLEVEL +uses DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_CONSOLE_SERIAL8250 +uses MAINBOARD +uses CONFIG_CHIP_CONFIGURE +uses XIP_ROM_SIZE +uses XIP_ROM_BASE +uses LINUXBIOS_EXTRA_VERSION + +option CONFIG_CHIP_CONFIGURE=1 + +option MAXIMUM_CONSOLE_LOGLEVEL=8 +option DEFAULT_CONSOLE_LOGLEVEL=8 +option CONFIG_CONSOLE_SERIAL8250=1 + +option CPU_FIXUP=1 +option CONFIG_UDELAY_TSC=0 +option i686=1 +option i586=1 +option INTEL_PPRO_MTRR=1 +option k7=1 +option k8=1 + +option ROM_SIZE=524288 + + +option HAVE_OPTION_TABLE=1 +option CONFIG_ROM_STREAM=1 +option HAVE_FALLBACK_BOOT=1 + +### +### Compute the location and size of where this firmware image +### (linuxBIOS plus bootloader) will live in the boot rom chip. +### +option FALLBACK_SIZE=131072 + +## LinuxBIOS C code runs at this location in RAM +option _RAMBASE=0x00004000 + +# +### +### Compute the start location and size size of +### The linuxBIOS bootloader. +### + +# +# Arima hdama +romimage "normal" + option USE_FALLBACK_IMAGE=0 + option ROM_IMAGE_SIZE=0x10000 + option LINUXBIOS_EXTRA_VERSION=".0Normal" + mainboard via/epia + payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf +end + +romimage "fallback" + option USE_FALLBACK_IMAGE=1 + option ROM_IMAGE_SIZE=0x10000 + option LINUXBIOS_EXTRA_VERSION=".0Fallback" + mainboard via/epia + payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf +end + +buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" |