diff options
Diffstat (limited to 'targets')
-rw-r--r-- | targets/Iwill/dk8htx/Config.lb | 168 |
1 files changed, 168 insertions, 0 deletions
diff --git a/targets/Iwill/dk8htx/Config.lb b/targets/Iwill/dk8htx/Config.lb new file mode 100644 index 0000000000..de29b5671c --- /dev/null +++ b/targets/Iwill/dk8htx/Config.lb @@ -0,0 +1,168 @@ +# Sample config file for +# the Iwill DK8S2 +# This will make a target directory of ./dk8s2 + +target dk8htx + +mainboard Iwill/DK8HTX + +option HAVE_HARD_RESET=1 + +option HAVE_OPTION_TABLE=1 +option HAVE_MP_TABLE=1 +option ROM_SIZE=512*1024 + +option HAVE_FALLBACK_BOOT=1 + +#option CONFIG_LSI_SCSI_FW_FIXUP=1 + + +# +### +### Build code to export a programmable irq routing table +### +option HAVE_PIRQ_TABLE=1 +option IRQ_SLOT_COUNT=12 +# +### +### Build code for SMP support +### Only worry about 2 micro processors +### +option CONFIG_SMP=1 +option CONFIG_MAX_CPUS=2 +#option CONFIG_LOGICAL_CPUS=2 +option CONFIG_MAX_PHYSICAL_CPUS=2 +# +### +### Build code to setup a generic IOAPIC +### +option CONFIG_IOAPIC=1 +# +### +### MEMORY_HOLE instructs earlymtrr.inc to +### enable caching from 0-640KB and to disable +### caching from 640KB-1MB using fixed MTRRs +### +### Enabling this option breaks SMP because secondary +### CPU identification depends on only variable MTRRs +### being enabled. +### +#option MEMORY_HOLE=0 +# +### +### Clean up the motherboard id strings +### +option MAINBOARD_PART_NUMBER="DK8HTX" +option MAINBOARD_VENDOR="Iwill" +# +### +### Compute the location and size of where this firmware image +### (linuxBIOS plus bootloader) will live in the boot rom chip. +### +#option FALLBACK_SIZE=524288 +#option FALLBACK_SIZE=98304 +option FALLBACK_SIZE=256*1024 + +## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +option ROM_IMAGE_SIZE=128*1024 + + +### +### Compute where this copy of linuxBIOS will start in the boot rom +### +# +### + +## We do use compressed image +#option CONFIG_COMPRESS=1 + +option CONFIG_CONSOLE_SERIAL8250=1 +option TTYS0_BAUD=115200 + +## +### Select the linuxBIOS loglevel +## +## EMERG 1 system is unusable +## ALERT 2 action must be taken immediately +## CRIT 3 critical conditions +## ERR 4 error conditions +## WARNING 5 warning conditions +## NOTICE 6 normal but significant condition +## INFO 7 informational +## DEBUG 8 debug-level messages +## SPEW 9 Way too many details + +## Request this level of debugging output +option DEFAULT_CONSOLE_LOGLEVEL=7 +## At a maximum only compile in this level of debugging +option MAXIMUM_CONSOLE_LOGLEVEL=7 + +#option DEBUG=1 + +# + +## LinuxBIOS C code runs at this location in RAM +option _RAMBASE=0x004000 + +## +## Use a 32K stack +## +option STACK_SIZE=0x8000 + +## +## Use a 56K heap +## +option HEAP_SIZE=0xe000 + +# +### +### Compute the start location and size size of +### The linuxBIOS bootloader. +### +option CONFIG_ROM_STREAM = 1 + +# +# +romimage "normal" +# 48K for SCSI FW +# option ROM_SIZE = 475136 +# 48K for SCSI FW and 48K for ATI ROM +# option ROM_SIZE = 425984 + option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal" + option USE_FALLBACK_IMAGE=0 + option ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE) + option ROM_SECTION_OFFSET= 0 + + option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE) + option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) + option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE) + +# option XIP_ROM_SIZE = FALLBACK_SIZE + option XIP_ROM_SIZE = 65536 + + option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE) + +# payload /usr/src/filo-0.4.1_btext/filo.elf + payload /tmp/filo.elf +# payload /usr/src/filo-0.4.2/filo.elf +end + +romimage "fallback" + option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback" + option USE_FALLBACK_IMAGE=1 + option ROM_SECTION_SIZE = FALLBACK_SIZE + option ROM_SECTION_OFFSET= (ROM_SIZE - FALLBACK_SIZE) + + option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE) + option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) + option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE) + +# option XIP_ROM_SIZE = FALLBACK_SIZE + option XIP_ROM_SIZE = 65536 + option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE) + + payload /tmp/filo.elf +# payload /usr/src/filo-0.4.2/filo.elf +end + +buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" |