summaryrefslogtreecommitdiff
path: root/targets
diff options
context:
space:
mode:
Diffstat (limited to 'targets')
-rw-r--r--targets/via/epia-m/Config.etherboot.lb107
-rw-r--r--targets/via/epia-m/Config.lb31
-rw-r--r--targets/via/epia-m/Config.vga.filo112
3 files changed, 237 insertions, 13 deletions
diff --git a/targets/via/epia-m/Config.etherboot.lb b/targets/via/epia-m/Config.etherboot.lb
new file mode 100644
index 0000000000..b19858da98
--- /dev/null
+++ b/targets/via/epia-m/Config.etherboot.lb
@@ -0,0 +1,107 @@
+# Sample config file for EPIA-M
+# This will make a target directory of ./epia-m
+
+loadoptions
+
+target epia-m
+
+uses ARCH
+uses CONFIG_COMPRESS
+uses CONFIG_IOAPIC
+uses CONFIG_ROM_STREAM
+uses CONFIG_ROM_STREAM_START
+uses CONFIG_UDELAY_TSC
+uses CPU_FIXUP
+uses FALLBACK_SIZE
+uses HAVE_FALLBACK_BOOT
+uses HAVE_MP_TABLE
+uses HAVE_PIRQ_TABLE
+uses HAVE_HARD_RESET
+uses i586
+uses i686
+uses INTEL_PPRO_MTRR
+uses HEAP_SIZE
+uses IRQ_SLOT_COUNT
+uses MAINBOARD_PART_NUMBER
+uses MAINBOARD_VENDOR
+uses CONFIG_SMP
+uses CONFIG_MAX_CPUS
+uses MEMORY_HOLE
+uses PAYLOAD_SIZE
+uses _RAMBASE
+uses _ROMBASE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_OFFSET
+uses ROM_SECTION_SIZE
+uses ROM_SIZE
+uses STACK_SIZE
+uses USE_FALLBACK_IMAGE
+uses USE_OPTION_TABLE
+uses HAVE_OPTION_TABLE
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses DEFAULT_CONSOLE_LOGLEVEL
+uses CONFIG_CONSOLE_SERIAL8250
+uses MAINBOARD
+uses CONFIG_CHIP_CONFIGURE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+uses LINUXBIOS_EXTRA_VERSION
+uses TTYS0_BAUD
+
+option TTYS0_BAUD=19200
+
+option CONFIG_CHIP_CONFIGURE=1
+
+option MAXIMUM_CONSOLE_LOGLEVEL=7
+option DEFAULT_CONSOLE_LOGLEVEL=7
+option CONFIG_CONSOLE_SERIAL8250=1
+
+option CPU_FIXUP=1
+option CONFIG_UDELAY_TSC=0
+option i686=1
+option i586=1
+option INTEL_PPRO_MTRR=1
+option ROM_SIZE=256*1024
+
+option HAVE_OPTION_TABLE=1
+option CONFIG_ROM_STREAM=1
+option HAVE_FALLBACK_BOOT=1
+
+###
+### Compute the location and size of where this firmware image
+### (linuxBIOS plus bootloader) will live in the boot rom chip.
+###
+option FALLBACK_SIZE=131072
+
+## LinuxBIOS C code runs at this location in RAM
+option _RAMBASE=0x00004000
+
+#
+###
+### Compute the start location and size size of
+### The linuxBIOS bootloader.
+###
+
+#
+# Arima hdama
+romimage "normal"
+ option USE_FALLBACK_IMAGE=0
+ option ROM_IMAGE_SIZE=0x10000
+ option LINUXBIOS_EXTRA_VERSION=".0Normal"
+ mainboard via/epia-m
+# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
+# payload ../../../../tg3--ide_disk.zelf
+ payload ../../../../../lnxieepro100.ebi
+end
+
+romimage "fallback"
+ option USE_FALLBACK_IMAGE=1
+ option ROM_IMAGE_SIZE=0x10000
+ option LINUXBIOS_EXTRA_VERSION=".0Fallback"
+ mainboard via/epia-m
+# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
+# payload ../../../../tg3--ide_disk.zelf
+ payload ../../../../../lnxieepro100.ebi
+end
+
+buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
diff --git a/targets/via/epia-m/Config.lb b/targets/via/epia-m/Config.lb
index b19858da98..ca87c7ba47 100644
--- a/targets/via/epia-m/Config.lb
+++ b/targets/via/epia-m/Config.lb
@@ -46,32 +46,33 @@ uses CONFIG_CHIP_CONFIGURE
uses XIP_ROM_SIZE
uses XIP_ROM_BASE
uses LINUXBIOS_EXTRA_VERSION
-uses TTYS0_BAUD
-
-option TTYS0_BAUD=19200
-
+uses HAVE_ACPI_TABLES
+uses CONFIG_LEGACY_VGABIOS
+uses VGABIOS_START
+uses VGABIOS_START
option CONFIG_CHIP_CONFIGURE=1
-option MAXIMUM_CONSOLE_LOGLEVEL=7
-option DEFAULT_CONSOLE_LOGLEVEL=7
+option MAXIMUM_CONSOLE_LOGLEVEL=8
+option DEFAULT_CONSOLE_LOGLEVEL=8
option CONFIG_CONSOLE_SERIAL8250=1
-
+option HAVE_ACPI_TABLES=1
option CPU_FIXUP=1
option CONFIG_UDELAY_TSC=0
option i686=1
option i586=1
option INTEL_PPRO_MTRR=1
option ROM_SIZE=256*1024
-
+option CONFIG_LEGACY_VGABIOS=1
option HAVE_OPTION_TABLE=1
option CONFIG_ROM_STREAM=1
option HAVE_FALLBACK_BOOT=1
+option VGABIOS_START=0xfffc0000
###
### Compute the location and size of where this firmware image
### (linuxBIOS plus bootloader) will live in the boot rom chip.
###
-option FALLBACK_SIZE=131072
+option FALLBACK_SIZE=0x18000
## LinuxBIOS C code runs at this location in RAM
option _RAMBASE=0x00004000
@@ -86,22 +87,26 @@ option _RAMBASE=0x00004000
# Arima hdama
romimage "normal"
option USE_FALLBACK_IMAGE=0
- option ROM_IMAGE_SIZE=0x10000
+ option ROM_IMAGE_SIZE=0xc000
+ option ROM_SECTION_OFFSET=0x10000
+ option ROM_SECTION_SIZE=0x18000
option LINUXBIOS_EXTRA_VERSION=".0Normal"
mainboard via/epia-m
# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
# payload ../../../../tg3--ide_disk.zelf
- payload ../../../../../lnxieepro100.ebi
+# payload ../../../../../lnxieepro100.ebi
+ payload /filo.elf
end
romimage "fallback"
option USE_FALLBACK_IMAGE=1
- option ROM_IMAGE_SIZE=0x10000
+ option ROM_IMAGE_SIZE=0xc000
option LINUXBIOS_EXTRA_VERSION=".0Fallback"
mainboard via/epia-m
# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
# payload ../../../../tg3--ide_disk.zelf
- payload ../../../../../lnxieepro100.ebi
+# payload ../../../../../lnxieepro100.ebi
+ payload /filo.elf
end
buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
diff --git a/targets/via/epia-m/Config.vga.filo b/targets/via/epia-m/Config.vga.filo
new file mode 100644
index 0000000000..ca87c7ba47
--- /dev/null
+++ b/targets/via/epia-m/Config.vga.filo
@@ -0,0 +1,112 @@
+# Sample config file for EPIA-M
+# This will make a target directory of ./epia-m
+
+loadoptions
+
+target epia-m
+
+uses ARCH
+uses CONFIG_COMPRESS
+uses CONFIG_IOAPIC
+uses CONFIG_ROM_STREAM
+uses CONFIG_ROM_STREAM_START
+uses CONFIG_UDELAY_TSC
+uses CPU_FIXUP
+uses FALLBACK_SIZE
+uses HAVE_FALLBACK_BOOT
+uses HAVE_MP_TABLE
+uses HAVE_PIRQ_TABLE
+uses HAVE_HARD_RESET
+uses i586
+uses i686
+uses INTEL_PPRO_MTRR
+uses HEAP_SIZE
+uses IRQ_SLOT_COUNT
+uses MAINBOARD_PART_NUMBER
+uses MAINBOARD_VENDOR
+uses CONFIG_SMP
+uses CONFIG_MAX_CPUS
+uses MEMORY_HOLE
+uses PAYLOAD_SIZE
+uses _RAMBASE
+uses _ROMBASE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_OFFSET
+uses ROM_SECTION_SIZE
+uses ROM_SIZE
+uses STACK_SIZE
+uses USE_FALLBACK_IMAGE
+uses USE_OPTION_TABLE
+uses HAVE_OPTION_TABLE
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses DEFAULT_CONSOLE_LOGLEVEL
+uses CONFIG_CONSOLE_SERIAL8250
+uses MAINBOARD
+uses CONFIG_CHIP_CONFIGURE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+uses LINUXBIOS_EXTRA_VERSION
+uses HAVE_ACPI_TABLES
+uses CONFIG_LEGACY_VGABIOS
+uses VGABIOS_START
+uses VGABIOS_START
+option CONFIG_CHIP_CONFIGURE=1
+
+option MAXIMUM_CONSOLE_LOGLEVEL=8
+option DEFAULT_CONSOLE_LOGLEVEL=8
+option CONFIG_CONSOLE_SERIAL8250=1
+option HAVE_ACPI_TABLES=1
+option CPU_FIXUP=1
+option CONFIG_UDELAY_TSC=0
+option i686=1
+option i586=1
+option INTEL_PPRO_MTRR=1
+option ROM_SIZE=256*1024
+option CONFIG_LEGACY_VGABIOS=1
+option HAVE_OPTION_TABLE=1
+option CONFIG_ROM_STREAM=1
+option HAVE_FALLBACK_BOOT=1
+
+option VGABIOS_START=0xfffc0000
+###
+### Compute the location and size of where this firmware image
+### (linuxBIOS plus bootloader) will live in the boot rom chip.
+###
+option FALLBACK_SIZE=0x18000
+
+## LinuxBIOS C code runs at this location in RAM
+option _RAMBASE=0x00004000
+
+#
+###
+### Compute the start location and size size of
+### The linuxBIOS bootloader.
+###
+
+#
+# Arima hdama
+romimage "normal"
+ option USE_FALLBACK_IMAGE=0
+ option ROM_IMAGE_SIZE=0xc000
+ option ROM_SECTION_OFFSET=0x10000
+ option ROM_SECTION_SIZE=0x18000
+ option LINUXBIOS_EXTRA_VERSION=".0Normal"
+ mainboard via/epia-m
+# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
+# payload ../../../../tg3--ide_disk.zelf
+# payload ../../../../../lnxieepro100.ebi
+ payload /filo.elf
+end
+
+romimage "fallback"
+ option USE_FALLBACK_IMAGE=1
+ option ROM_IMAGE_SIZE=0xc000
+ option LINUXBIOS_EXTRA_VERSION=".0Fallback"
+ mainboard via/epia-m
+# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
+# payload ../../../../tg3--ide_disk.zelf
+# payload ../../../../../lnxieepro100.ebi
+ payload /filo.elf
+end
+
+buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 23:08:26 +0000