1 files changed, 89 insertions, 0 deletions
diff --git a/targets/totalimpact/briq/Config.lb b/targets/totalimpact/briq/Config.lb
new file mode 100644
index 0000000000..6a4975e602
--- /dev/null
+++ b/targets/totalimpact/briq/Config.lb
@@ -0,0 +1,89 @@
+# Config file for the Total Impact briQ
+# This will make a target directory of ./briq
+
+loadoptions
+
+target briq
+
+uses CROSS_COMPILE 
+uses HAVE_OPTION_TABLE
+uses CONFIG_COMPRESS 
+uses DEFAULT_CONSOLE_LOGLEVEL 
+uses CONFIG_USE_INIT
+uses NO_POST
+uses CONFIG_CONSOLE_SERIAL8250 
+uses TTYS0_BASE 
+uses UART0_IO_BASE 
+uses CONFIG_IDE_STREAM 
+uses IDE_BOOT_DRIVE
+uses IDE_SWAB IDE_OFFSET 
+uses ROM_SIZE
+uses _RESET
+uses _EXCEPTION_VECTORS
+uses _ROMBASE
+uses _ROMSTART
+uses _RAMBASE
+uses _RAMSTART
+uses STACK_SIZE
+uses HEAP_SIZE
+uses CONFIG_BRIQ_750FX 
+uses CONFIG_BRIQ_7400
+
+## use a cross compiler
+#option CROSS_COMPILE="powerpc-eabi-"
+#option CROSS_COMPILE="ppc_74xx-"
+
+## Use stage 1 initialization code
+option CONFIG_USE_INIT=1
+
+## We don't use compressed image
+option CONFIG_COMPRESS=0
+
+## Turn off POST codes
+option NO_POST=1
+
+## Enable serial console
+option DEFAULT_CONSOLE_LOGLEVEL=8
+option CONFIG_CONSOLE_SERIAL8250=1
+option UART0_IO_BASE=0x3f0
+option TTYS0_BASE=0xfe000000+UART0_IO_BASE
+
+## Boot linux from IDE
+option CONFIG_IDE_STREAM=1
+option IDE_BOOT_DRIVE=0
+option IDE_SWAB=1
+option IDE_OFFSET=0
+
+# ROM is 1Mb
+option ROM_SIZE=1048576
+
+# Set stack and heap sizes (stage 2)
+option STACK_SIZE=0x10000
+option HEAP_SIZE=0x10000
+
+# Sandpoint Demo Board
+romimage "normal"
+	## Base of ROM
+	option _ROMBASE=0xfff00000
+
+	## Sandpoint reset vector
+	option _RESET=_ROMBASE+0x100
+
+	## Exception vectors (other than reset vector)
+	option _EXCEPTION_VECTORS=_RESET+0x100
+
+	## Start of linuxBIOS in the boot rom
+	## = _RESET + exeception vector table size
+	option _ROMSTART=_RESET+0x3100
+
+	## LinuxBIOS C code runs at this location in RAM
+	option _RAMBASE=0x00100000
+	option _RAMSTART=0x00100000
+
+	option CONFIG_BRIQ_750FX=1
+	#option CONFIG_BRIQ_7400=1
+
+	mainboard totalimpact/briq
+end
+
+buildrom ./linuxbios.rom ROM_SIZE "normal"