diff options
Diffstat (limited to 'targets/Iwill/dk8htx')
| -rw-r--r-- | targets/Iwill/dk8htx/Config.lb | 168 |
1 files changed, 0 insertions, 168 deletions
diff --git a/targets/Iwill/dk8htx/Config.lb b/targets/Iwill/dk8htx/Config.lb deleted file mode 100644 index 2da6d30781..0000000000 --- a/targets/Iwill/dk8htx/Config.lb +++ /dev/null @@ -1,168 +0,0 @@ -# Sample config file for -# the Iwill DK8S2 -# This will make a target directory of ./dk8s2 - -target dk8htx - -mainboard Iwill/DK8HTX - -option HAVE_HARD_RESET=1 - -option HAVE_OPTION_TABLE=1 -option HAVE_MP_TABLE=1 -option ROM_SIZE=512*1024 - -option HAVE_FALLBACK_BOOT=1 - -#option CONFIG_LSI_SCSI_FW_FIXUP=1 - - -# -### -### Build code to export a programmable irq routing table -### -option HAVE_PIRQ_TABLE=1 -option IRQ_SLOT_COUNT=12 -# -### -### Build code for SMP support -### Only worry about 2 micro processors -### -option CONFIG_SMP=1 -option CONFIG_MAX_CPUS=2 -#option CONFIG_LOGICAL_CPUS=2 -option CONFIG_MAX_PHYSICAL_CPUS=2 -# -### -### Build code to setup a generic IOAPIC -### -option CONFIG_IOAPIC=1 -# -### -### MEMORY_HOLE instructs earlymtrr.inc to -### enable caching from 0-640KB and to disable -### caching from 640KB-1MB using fixed MTRRs -### -### Enabling this option breaks SMP because secondary -### CPU identification depends on only variable MTRRs -### being enabled. -### -#option MEMORY_HOLE=0 -# -### -### Clean up the motherboard id strings -### -option MAINBOARD_PART_NUMBER="DK8HTX" -option MAINBOARD_VENDOR="Iwill" -# -### -### Compute the location and size of where this firmware image -### (linuxBIOS plus bootloader) will live in the boot rom chip. -### -#option FALLBACK_SIZE=524288 -#option FALLBACK_SIZE=98304 -option FALLBACK_SIZE=256*1024 - -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. -option ROM_IMAGE_SIZE=128*1024 - - -### -### Compute where this copy of linuxBIOS will start in the boot rom -### -# -### - -## We do use compressed image -#option CONFIG_COMPRESS=1 - -option CONFIG_CONSOLE_SERIAL8250=1 -option TTYS0_BAUD=115200 - -## -### Select the linuxBIOS loglevel -## -## EMERG 1 system is unusable -## ALERT 2 action must be taken immediately -## CRIT 3 critical conditions -## ERR 4 error conditions -## WARNING 5 warning conditions -## NOTICE 6 normal but significant condition -## INFO 7 informational -## DEBUG 8 debug-level messages -## SPEW 9 Way too many details - -## Request this level of debugging output -option DEFAULT_CONSOLE_LOGLEVEL=7 -## At a maximum only compile in this level of debugging -option MAXIMUM_CONSOLE_LOGLEVEL=7 - -#option DEBUG=1 - -# - -## LinuxBIOS C code runs at this location in RAM -option _RAMBASE=0x004000 - -## -## Use a 32K stack -## -option STACK_SIZE=0x8000 - -## -## Use a 56K heap -## -option HEAP_SIZE=0xe000 - -# -### -### Compute the start location and size size of -### The linuxBIOS bootloader. -### -option CONFIG_ROM_STREAM = 1 - -# -# -romimage "normal" -# 48K for SCSI FW -# option ROM_SIZE = 512*1024-48*1024 -# 48K for SCSI FW and 48K for ATI ROM -# option ROM_SIZE = 512*1024-48*1024-48*1024 - option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal" - option USE_FALLBACK_IMAGE=0 - option ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE) - option ROM_SECTION_OFFSET= 0 - - option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE) - option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) - option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE) - -# option XIP_ROM_SIZE = FALLBACK_SIZE - option XIP_ROM_SIZE = 65536 - - option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE) - -# payload /usr/src/filo-0.4.1_btext/filo.elf - payload /tmp/filo.elf -# payload /usr/src/filo-0.4.2/filo.elf -end - -romimage "fallback" - option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback" - option USE_FALLBACK_IMAGE=1 - option ROM_SECTION_SIZE = FALLBACK_SIZE - option ROM_SECTION_OFFSET= (ROM_SIZE - FALLBACK_SIZE) - - option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE) - option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) - option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE) - -# option XIP_ROM_SIZE = FALLBACK_SIZE - option XIP_ROM_SIZE = 65536 - option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE) - - payload /tmp/filo.elf -# payload /usr/src/filo-0.4.2/filo.elf -end - -buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" |