diff options
Diffstat (limited to 'src')
31 files changed, 270 insertions, 702 deletions
diff --git a/src/mainboard/apple/macbookair4_2/early_southbridge.c b/src/mainboard/apple/macbookair4_2/early_southbridge.c index 67f89db0e3..e2a785cb7e 100644 --- a/src/mainboard/apple/macbookair4_2/early_southbridge.c +++ b/src/mainboard/apple/macbookair4_2/early_southbridge.c @@ -55,6 +55,10 @@ const struct southbridge_usb_port mainboard_usb_ports[] = { void mainboard_early_init(int s3resume) { } +void mainboard_config_superio(void) +{ +} + void mainboard_get_spd(spd_raw_data *spd) { void *spd_file; diff --git a/src/mainboard/gigabyte/ga-b75m-d3h/romstage.c b/src/mainboard/gigabyte/ga-b75m-d3h/romstage.c index ff85ce1795..43dc6dddc8 100644 --- a/src/mainboard/gigabyte/ga-b75m-d3h/romstage.c +++ b/src/mainboard/gigabyte/ga-b75m-d3h/romstage.c @@ -208,3 +208,7 @@ static void dmi_config(void) void mainboard_early_init(int s3resume) { } + +void mainboard_config_superio(void) +{ +} diff --git a/src/mainboard/gigabyte/ga-b75m-d3v/romstage.c b/src/mainboard/gigabyte/ga-b75m-d3v/romstage.c index 436f82e625..afb3f9f5ff 100644 --- a/src/mainboard/gigabyte/ga-b75m-d3v/romstage.c +++ b/src/mainboard/gigabyte/ga-b75m-d3v/romstage.c @@ -118,3 +118,7 @@ void mainboard_get_spd(spd_raw_data *spd) { void mainboard_early_init(int s3resume) { } + +void mainboard_config_superio(void) +{ +} diff --git a/src/mainboard/google/butterfly/romstage.c b/src/mainboard/google/butterfly/romstage.c index 40b5e762dc..65a294c555 100644 --- a/src/mainboard/google/butterfly/romstage.c +++ b/src/mainboard/google/butterfly/romstage.c @@ -131,3 +131,7 @@ void mainboard_get_spd(spd_raw_data *spd) { void mainboard_early_init(int s3resume) { } + +void mainboard_config_superio(void) +{ +} diff --git a/src/mainboard/google/link/gpio.h b/src/mainboard/google/link/gpio.h index 1dab97e75e..ea6110e8f9 100644 --- a/src/mainboard/google/link/gpio.h +++ b/src/mainboard/google/link/gpio.h @@ -98,7 +98,7 @@ const struct pch_gpio_set3 pch_gpio_set3_direction = { const struct pch_gpio_set3 pch_gpio_set3_level = { }; -const struct pch_gpio_map link_gpio_map = { +const struct pch_gpio_map mainboard_gpio_map = { .set1 = { .mode = &pch_gpio_set1_mode, .direction = &pch_gpio_set1_direction, diff --git a/src/mainboard/google/link/romstage.c b/src/mainboard/google/link/romstage.c index a0970df562..2f40ba5186 100644 --- a/src/mainboard/google/link/romstage.c +++ b/src/mainboard/google/link/romstage.c @@ -33,7 +33,6 @@ #include <southbridge/intel/bd82x6x/gpio.h> #include "ec/google/chromeec/ec.h" #include <arch/cpu.h> -#include <cpu/x86/bist.h> #include <cpu/x86/msr.h> #include <halt.h> #include "gpio.h" @@ -42,7 +41,7 @@ #include <southbridge/intel/bd82x6x/chip.h> -static void pch_enable_lpc(void) +void pch_enable_lpc(void) { const struct device *lpc; const struct southbridge_intel_bd82x6x_config *config = NULL; @@ -68,7 +67,7 @@ static void pch_enable_lpc(void) pci_write_config32(PCH_LPC_DEV, LPC_GEN4_DEC, config->gen4_dec); } -static void rcba_config(void) +void rcba_config(void) { u32 reg32; @@ -144,13 +143,9 @@ static void copy_spd(struct pei_data *peid) sizeof(peid->spd_data[0])); } -#include <cpu/intel/romstage.h> -void main(unsigned long bist) +void mainboard_fill_pei_data(struct pei_data *pei_data) { - int boot_mode = 0; - int cbmem_was_initted; - - struct pei_data pei_data = { + struct pei_data pei_data_template = { .pei_version = PEI_VERSION, .mchbar = (uintptr_t)DEFAULT_MCHBAR, .dmibar = (uintptr_t)DEFAULT_DMIBAR, @@ -195,89 +190,25 @@ void main(unsigned long bist) { 0, 4, 0x0000 }, /* P13: Empty */ }, }; + *pei_data = pei_data_template; + copy_spd(pei_data); +} - timestamp_init(get_initial_timestamp()); - timestamp_add_now(TS_START_ROMSTAGE); - - if (bist == 0) - enable_lapic(); - - pch_enable_lpc(); - - /* Enable GPIOs */ - pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE|1); - pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10); - setup_pch_gpios(&link_gpio_map); - - /* Initialize console device(s) */ - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - if (MCHBAR16(SSKPD) == 0xCAFE) { - printk(BIOS_DEBUG, "soft reset detected\n"); - boot_mode = 1; - - /* System is not happy after keyboard reset... */ - printk(BIOS_DEBUG, "Issuing CF9 warm reset\n"); - outb(0x6, 0xcf9); - halt(); - } - - /* Perform some early chipset initialization required - * before RAM initialization can work - */ - sandybridge_early_initialization(SANDYBRIDGE_MOBILE); - printk(BIOS_DEBUG, "Back from sandybridge_early_initialization()\n"); - - boot_mode = southbridge_detect_s3_resume() ? 2 : 0; - if (boot_mode == 0) { +void mainboard_early_init(int s3resume) +{ + if (!s3resume) { /* This is the fastest way to let users know * the Intel CPU is now alive. */ google_chromeec_kbbacklight(100); } +} - post_code(0x38); - /* Enable SPD ROMs and DDR-III DRAM */ - enable_smbus(); - - /* Prepare USB controller early in S3 resume */ - if (boot_mode == 2) - enable_usb_bar(); - - post_code(0x39); - - copy_spd(&pei_data); - - post_code(0x3a); - pei_data.boot_mode = boot_mode; - timestamp_add_now(TS_BEFORE_INITRAM); - sdram_initialize(&pei_data); - - timestamp_add_now(TS_AFTER_INITRAM); - post_code(0x3c); - - rcba_config(); - post_code(0x3d); - - quick_ram_check(); - post_code(0x3e); - - cbmem_was_initted = !cbmem_recovery(boot_mode==2); - if (boot_mode!=2) - save_mrc_data(&pei_data); - - if (boot_mode==2 && !cbmem_was_initted) { - /* Failed S3 resume, reset to come up cleanly */ - outb(0x6, 0xcf9); - halt(); - } - northbridge_romstage_finalize(boot_mode==2); +int mainboard_should_reset_usb(int s3resume) +{ + return !s3resume; +} - post_code(0x3f); - if (CONFIG_LPC_TPM) { - init_tpm(boot_mode == 2); - } +void mainboard_config_superio(void) +{ } diff --git a/src/mainboard/google/parrot/gpio.h b/src/mainboard/google/parrot/gpio.h index 1cfd487f09..c3e3e2fbe7 100644 --- a/src/mainboard/google/parrot/gpio.h +++ b/src/mainboard/google/parrot/gpio.h @@ -254,7 +254,7 @@ const struct pch_gpio_set3 pch_gpio_set3_level = { .gpio75 = GPIO_LEVEL_LOW, }; -const struct pch_gpio_map parrot_gpio_map = { +const struct pch_gpio_map mainboard_gpio_map = { .set1 = { .mode = &pch_gpio_set1_mode, .direction = &pch_gpio_set1_direction, diff --git a/src/mainboard/google/parrot/romstage.c b/src/mainboard/google/parrot/romstage.c index 029805b045..60c3f010f8 100644 --- a/src/mainboard/google/parrot/romstage.c +++ b/src/mainboard/google/parrot/romstage.c @@ -31,7 +31,6 @@ #include <southbridge/intel/bd82x6x/pch.h> #include <southbridge/intel/bd82x6x/gpio.h> #include <arch/cpu.h> -#include <cpu/x86/bist.h> #include <cpu/x86/msr.h> #include <halt.h> #include "gpio.h" @@ -39,7 +38,7 @@ #include <tpm.h> #include "ec/compal/ene932/ec.h" -static void pch_enable_lpc(void) +void pch_enable_lpc(void) { /* Parrot EC Decode Range Port60/64, Port62/66 */ /* Enable EC, PS/2 Keyboard/Mouse */ @@ -52,7 +51,7 @@ static void pch_enable_lpc(void) pci_write_config32(PCH_LPC_DEV, LPC_GEN2_DEC, (68 & ~3) | 0x00040001); } -static void rcba_config(void) +void rcba_config(void) { u32 reg32; @@ -107,13 +106,13 @@ static void rcba_config(void) RCBA32(FD) = reg32; } -#include <cpu/intel/romstage.h> -void main(unsigned long bist) +void mainboard_early_init(int s3resume) { - int boot_mode = 0; - int cbmem_was_initted; +} - struct pei_data pei_data = { +void mainboard_fill_pei_data(struct pei_data *pei_data) +{ + struct pei_data pei_data_template = { .pei_version = PEI_VERSION, .mchbar = (uintptr_t)DEFAULT_MCHBAR, .dmibar = (uintptr_t)DEFAULT_DMIBAR, @@ -158,81 +157,14 @@ void main(unsigned long bist) { 0, 4, 0x0000 }, /* P13: Empty */ }, }; + *pei_data = pei_data_template; +} - timestamp_init(get_initial_timestamp()); - timestamp_add_now(TS_START_ROMSTAGE); - - if (bist == 0) - enable_lapic(); - - pch_enable_lpc(); - - /* Enable GPIOs */ - pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE|1); - pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10); - setup_pch_gpios(&parrot_gpio_map); - - /* Initialize console device(s) */ - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - if (MCHBAR16(SSKPD) == 0xCAFE) { - printk(BIOS_DEBUG, "soft reset detected\n"); - boot_mode = 1; - - /* System is not happy after keyboard reset... */ - printk(BIOS_DEBUG, "Issuing CF9 warm reset\n"); - outb(0x6, 0xcf9); - halt(); - } - - /* Perform some early chipset initialization required - * before RAM initialization can work - */ - sandybridge_early_initialization(SANDYBRIDGE_MOBILE); - printk(BIOS_DEBUG, "Back from sandybridge_early_initialization()\n"); - - boot_mode = southbridge_detect_s3_resume() ? 2 : 0; - - post_code(0x38); - /* Enable SPD ROMs and DDR-III DRAM */ - enable_smbus(); - - /* Prepare USB controller early in S3 resume */ - if (boot_mode == 2) - enable_usb_bar(); - - post_code(0x39); - - post_code(0x3a); - pei_data.boot_mode = boot_mode; - timestamp_add_now(TS_BEFORE_INITRAM); - sdram_initialize(&pei_data); - - timestamp_add_now(TS_AFTER_INITRAM); - post_code(0x3c); - - rcba_config(); - post_code(0x3d); - - quick_ram_check(); - post_code(0x3e); - - cbmem_was_initted = !cbmem_recovery(boot_mode==2); - if (boot_mode!=2) - save_mrc_data(&pei_data); - - if (boot_mode==2 && !cbmem_was_initted) { - /* Failed S3 resume, reset to come up cleanly */ - outb(0x6, 0xcf9); - halt(); - } - northbridge_romstage_finalize(boot_mode==2); +void mainboard_config_superio(void) +{ +} - post_code(0x3f); - if (CONFIG_LPC_TPM) { - init_tpm(boot_mode == 2); - } +int mainboard_should_reset_usb(int s3resume) +{ + return !s3resume; } diff --git a/src/mainboard/google/stout/gpio.h b/src/mainboard/google/stout/gpio.h index f992013519..7fffe8b48b 100644 --- a/src/mainboard/google/stout/gpio.h +++ b/src/mainboard/google/stout/gpio.h @@ -267,7 +267,7 @@ const struct pch_gpio_set3 pch_gpio_set3_level = { .gpio72 = GPIO_LEVEL_HIGH, }; -const struct pch_gpio_map stout_gpio_map = { +const struct pch_gpio_map mainboard_gpio_map = { .set1 = { .mode = &pch_gpio_set1_mode, .direction = &pch_gpio_set1_direction, diff --git a/src/mainboard/google/stout/romstage.c b/src/mainboard/google/stout/romstage.c index 030dee75ff..99979e9e90 100644 --- a/src/mainboard/google/stout/romstage.c +++ b/src/mainboard/google/stout/romstage.c @@ -31,7 +31,6 @@ #include <southbridge/intel/bd82x6x/pch.h> #include <southbridge/intel/bd82x6x/gpio.h> #include <arch/cpu.h> -#include <cpu/x86/bist.h> #include <cpu/x86/msr.h> #include <halt.h> #include "gpio.h" @@ -42,7 +41,7 @@ #include "ec.h" #include "onboard.h" -static void pch_enable_lpc(void) +void pch_enable_lpc(void) { /* * Enable: @@ -58,7 +57,7 @@ static void pch_enable_lpc(void) pci_write_config32(PCH_LPC_DEV, LPC_GEN1_DEC, (0x68 | 0x40001)); } -static void rcba_config(void) +void rcba_config(void) { u32 reg32; @@ -113,13 +112,6 @@ static void rcba_config(void) RCBA32(FD) = reg32; } -// FIXME, this function is generic code that should go to sb/... or -// nb/../early_init.c -static void early_pch_init(void) -{ - // Nothing to do for stout -} - /* * The Stout EC needs to be reset to RW mode. It is important that * the RTC_PWR_STS is not set until ramstage EC init. @@ -148,13 +140,9 @@ static void early_ec_init(void) } } -#include <cpu/intel/romstage.h> -void main(unsigned long bist) +void mainboard_fill_pei_data(struct pei_data *pei_data) { - int boot_mode = 0; - int cbmem_was_initted; - - struct pei_data pei_data = { + struct pei_data pei_data_template = { .pei_version = PEI_VERSION, .mchbar = (uintptr_t)DEFAULT_MCHBAR, .dmibar = (uintptr_t)DEFAULT_DMIBAR, @@ -204,89 +192,22 @@ void main(unsigned long bist) .xhci_streams = XHCI_STREAMS, }, }; + *pei_data = pei_data_template; +} - timestamp_init(get_initial_timestamp()); - timestamp_add_now(TS_START_ROMSTAGE); - - if (bist == 0) - enable_lapic(); - - pch_enable_lpc(); - - /* Enable GPIOs */ - pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE|1); - pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10); - setup_pch_gpios(&stout_gpio_map); - - /* Initialize console device(s) */ - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - if (MCHBAR16(SSKPD) == 0xCAFE) { - printk(BIOS_DEBUG, "soft reset detected\n"); - boot_mode = 1; - - /* System is not happy after keyboard reset... */ - printk(BIOS_DEBUG, "Issuing CF9 warm reset\n"); - outb(0x6, 0xcf9); - halt(); - } - - - /* Perform some early chipset initialization required - * before RAM initialization can work - */ - sandybridge_early_initialization(SANDYBRIDGE_MOBILE); - printk(BIOS_DEBUG, "Back from sandybridge_early_initialization()\n"); - - boot_mode = southbridge_detect_s3_resume() ? 2 : 0; - +void mainboard_early_init(int s3resume) +{ /* Do ec reset as early as possible, but skip it on S3 resume */ - if (boot_mode < 2) + if (!s3resume) { early_ec_init(); - - post_code(0x38); - /* Enable SPD ROMs and DDR-III DRAM */ - enable_smbus(); - - /* Prepare USB controller early in S3 resume */ - if (boot_mode == 2) - enable_usb_bar(); - - post_code(0x39); - - post_code(0x3a); - pei_data.boot_mode = boot_mode; - timestamp_add_now(TS_BEFORE_INITRAM); - sdram_initialize(&pei_data); - - timestamp_add_now(TS_AFTER_INITRAM); - post_code(0x3b); - /* Perform some initialization that must run before stage2 */ - early_pch_init(); - post_code(0x3c); - - rcba_config(); - post_code(0x3d); - - quick_ram_check(); - post_code(0x3e); - - cbmem_was_initted = !cbmem_recovery(boot_mode==2); - if (boot_mode!=2) - save_mrc_data(&pei_data); - - if (boot_mode==2 && !cbmem_was_initted) { - /* Failed S3 resume, reset to come up cleanly */ - outb(0x6, 0xcf9); - halt(); } - northbridge_romstage_finalize(boot_mode==2); +} - post_code(0x3f); - if (CONFIG_LPC_TPM) { - init_tpm(boot_mode == 2); - } +int mainboard_should_reset_usb(int s3resume) +{ + return !s3resume; +} + +void mainboard_config_superio(void) +{ } diff --git a/src/mainboard/intel/emeraldlake2/gpio.h b/src/mainboard/intel/emeraldlake2/gpio.h index 81bccdfb03..37b2430aea 100644 --- a/src/mainboard/intel/emeraldlake2/gpio.h +++ b/src/mainboard/intel/emeraldlake2/gpio.h @@ -80,7 +80,7 @@ const struct pch_gpio_set3 pch_gpio_set3_direction = { const struct pch_gpio_set3 pch_gpio_set3_level = { }; -const struct pch_gpio_map emeraldlake2_gpio_map = { +const struct pch_gpio_map mainboard_gpio_map = { .set1 = { .mode = &pch_gpio_set1_mode, .direction = &pch_gpio_set1_direction, diff --git a/src/mainboard/intel/emeraldlake2/romstage.c b/src/mainboard/intel/emeraldlake2/romstage.c index 5cf24b2030..145526a060 100644 --- a/src/mainboard/intel/emeraldlake2/romstage.c +++ b/src/mainboard/intel/emeraldlake2/romstage.c @@ -32,7 +32,6 @@ #include <southbridge/intel/bd82x6x/pch.h> #include <southbridge/intel/bd82x6x/gpio.h> #include <arch/cpu.h> -#include <cpu/x86/bist.h> #include <cpu/x86/msr.h> #include <halt.h> #include <tpm.h> @@ -40,7 +39,7 @@ #define SIO_PORT 0x164e -static void pch_enable_lpc(void) +void pch_enable_lpc(void) { device_t dev = PCH_LPC_DEV; @@ -64,7 +63,7 @@ static void pch_enable_lpc(void) } } -static void rcba_config(void) +void rcba_config(void) { u32 reg32; @@ -76,19 +75,7 @@ static void rcba_config(void) RCBA32(FD) = reg32; } -// FIXME, this function is generic code that should go to sb/... or -// nb/../early_init.c -static void early_pch_init(void) -{ - u8 reg8; - - // reset rtc power status - reg8 = pci_read_config8(PCH_LPC_DEV, 0xa4); - reg8 &= ~(1 << 2); - pci_write_config8(PCH_LPC_DEV, 0xa4, reg8); -} - -static void setup_sio_gpios(void) +void mainboard_config_superio(void) { const u16 port = SIO_PORT; const u16 runtime_port = 0x180; @@ -121,13 +108,9 @@ static void setup_sio_gpios(void) outb(0xaa, port); } -#include <cpu/intel/romstage.h> -void main(unsigned long bist) +void mainboard_fill_pei_data(struct pei_data *pei_data) { - int boot_mode = 0; - int cbmem_was_initted; - - struct pei_data pei_data = { + struct pei_data pei_data_template = { .pei_version = PEI_VERSION, .mchbar = (uintptr_t)DEFAULT_MCHBAR, .dmibar = (uintptr_t)DEFAULT_DMIBAR, @@ -170,86 +153,14 @@ void main(unsigned long bist) { 1, 5, 0x0040 }, /* P13: Back port (OC5) */ }, }; + *pei_data = pei_data_template; +} - timestamp_init(get_initial_timestamp()); - timestamp_add_now(TS_START_ROMSTAGE); - - if (bist == 0) - enable_lapic(); - - pch_enable_lpc(); - - /* Enable GPIOs */ - pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE|1); - pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10); - setup_pch_gpios(&emeraldlake2_gpio_map); - setup_sio_gpios(); - - /* Early SuperIO setup */ - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - if (MCHBAR16(SSKPD) == 0xCAFE) { - printk(BIOS_DEBUG, "soft reset detected\n"); - boot_mode = 1; - - /* System is not happy after keyboard reset... */ - printk(BIOS_DEBUG, "Issuing CF9 warm reset\n"); - outb(0x6, 0xcf9); - halt(); - } - - /* Perform some early chipset initialization required - * before RAM initialization can work - */ - sandybridge_early_initialization(SANDYBRIDGE_MOBILE); - printk(BIOS_DEBUG, "Back from sandybridge_early_initialization()\n"); - - boot_mode = southbridge_detect_s3_resume() ? 2 : 0; - - post_code(0x38); - /* Enable SPD ROMs and DDR-III DRAM */ - enable_smbus(); - - /* Prepare USB controller early in S3 resume */ - if (boot_mode == 2) - enable_usb_bar(); - - post_code(0x3a); - pei_data.boot_mode = boot_mode; - timestamp_add_now(TS_BEFORE_INITRAM); - sdram_initialize(&pei_data); - - timestamp_add_now(TS_AFTER_INITRAM); - post_code(0x3b); - /* Perform some initialization that must run before stage2 */ - early_pch_init(); - post_code(0x3c); - - /* This should probably go away. Until now it is required - * and mainboard specific - */ - rcba_config(); - post_code(0x3d); - - quick_ram_check(); - post_code(0x3e); - - cbmem_was_initted = !cbmem_recovery(boot_mode==2); - if (boot_mode!=2) - save_mrc_data(&pei_data); - - if (boot_mode==2 && !cbmem_was_initted) { - /* Failed S3 resume, reset to come up cleanly */ - outb(0x6, 0xcf9); - halt(); - } - northbridge_romstage_finalize(boot_mode==2); +void mainboard_early_init(int s3resume) +{ +} - post_code(0x3f); - if (CONFIG_LPC_TPM) { - init_tpm(boot_mode == 2); - } +int mainboard_should_reset_usb(int s3resume) +{ + return !s3resume; } diff --git a/src/mainboard/kontron/ktqm77/gpio.h b/src/mainboard/kontron/ktqm77/gpio.h index 23139f77bd..a6c39606e5 100644 --- a/src/mainboard/kontron/ktqm77/gpio.h +++ b/src/mainboard/kontron/ktqm77/gpio.h @@ -279,7 +279,7 @@ const struct pch_gpio_set3 pch_gpio_set3_level = { .gpio75 = GPIO_LEVEL_LOW, /* Native */ }; -const struct pch_gpio_map ktqm77_gpio_map = { +const struct pch_gpio_map mainboard_gpio_map = { .set1 = { .mode = &pch_gpio_set1_mode, .direction = &pch_gpio_set1_direction, diff --git a/src/mainboard/kontron/ktqm77/romstage.c b/src/mainboard/kontron/ktqm77/romstage.c index 4a9efa656f..197b460e49 100644 --- a/src/mainboard/kontron/ktqm77/romstage.c +++ b/src/mainboard/kontron/ktqm77/romstage.c @@ -31,12 +31,11 @@ #include <southbridge/intel/bd82x6x/pch.h> #include <southbridge/intel/bd82x6x/gpio.h> #include <arch/cpu.h> -#include <cpu/x86/bist.h> #include <cpu/x86/msr.h> #include <halt.h> #include "gpio.h" -static void pch_enable_lpc(void) +void pch_enable_lpc(void) { /* Set COM3/COM1 decode ranges: 0x3e8/0x3f8 */ pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x0070); @@ -52,12 +51,10 @@ static void pch_enable_lpc(void) COMA_LPC_EN | COMB_LPC_EN); } -static void rcba_config(void) +void rcba_config(void) { u32 reg32; - southbridge_configure_default_intmap(); - /* Disable unused devices (board specific) */ reg32 = RCBA32(FD); reg32 |= PCH_DISABLE_ALWAYS; @@ -79,7 +76,7 @@ static void pnp_exit_ext_func_mode(device_t dev) outb(0xaa, port); } -static void superio_gpio_config(void) +void mainboard_config_superio(void) { int lvds_3v = 0; // 0 (5V) or 1 (3V3) int dis_bl_inv = 1; // backlight inversion: 1 = disabled, 0 = enabled @@ -100,13 +97,9 @@ static void superio_gpio_config(void) pnp_exit_ext_func_mode(dev); } -#include <cpu/intel/romstage.h> -void main(unsigned long bist) +void mainboard_fill_pei_data(struct pei_data *pei_data) { - int boot_mode = 0; - int cbmem_was_initted; - - struct pei_data pei_data = { + struct pei_data pei_data_template = { .pei_version = PEI_VERSION, .mchbar = (uintptr_t)DEFAULT_MCHBAR, .dmibar = (uintptr_t)DEFAULT_DMIBAR, @@ -159,84 +152,18 @@ void main(unsigned long bist) }, .pcie_init = 1, }; + *pei_data = pei_data_template; +} - timestamp_init(get_initial_timestamp()); - timestamp_add_now(TS_START_ROMSTAGE); - - if (bist == 0) - enable_lapic(); - - pch_enable_lpc(); - - /* Enable GPIOs */ - pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE|1); - pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10); - setup_pch_gpios(&ktqm77_gpio_map); - superio_gpio_config(); - - /* Initialize console device(s) */ - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - if (MCHBAR16(SSKPD) == 0xCAFE) { - printk(BIOS_DEBUG, "soft reset detected\n"); - boot_mode = 1; - - /* System is not happy after keyboard reset... */ - printk(BIOS_DEBUG, "Issuing CF9 warm reset\n"); - outb(0x6, 0xcf9); - halt(); - } - - /* Perform some early chipset initialization required - * before RAM initialization can work - */ - sandybridge_early_initialization(SANDYBRIDGE_MOBILE); - printk(BIOS_DEBUG, "Back from sandybridge_early_initialization()\n"); - +void mainboard_early_init(int s3resume) +{ /* Enable PEG10 (1x16) */ pci_write_config32(PCI_DEV(0, 0, 0), DEVEN, pci_read_config32(PCI_DEV(0, 0, 0), DEVEN) | DEVEN_PEG10); +} - boot_mode = southbridge_detect_s3_resume() ? 2 : 0; - - post_code(0x38); - /* Enable SPD ROMs and DDR-III DRAM */ - enable_smbus(); - - /* Prepare USB controller early in S3 resume */ - if (boot_mode == 2) - enable_usb_bar(); - - post_code(0x39); - - post_code(0x3a); - pei_data.boot_mode = boot_mode; - timestamp_add_now(TS_BEFORE_INITRAM); - sdram_initialize(&pei_data); - - timestamp_add_now(TS_AFTER_INITRAM); - post_code(0x3c); - - rcba_config(); - post_code(0x3d); - - quick_ram_check(); - post_code(0x3e); - - cbmem_was_initted = !cbmem_recovery(boot_mode==2); - if (boot_mode!=2) - save_mrc_data(&pei_data); - - if (boot_mode==2 && !cbmem_was_initted) { - /* Failed S3 resume, reset to come up cleanly */ - outb(0x6, 0xcf9); - halt(); - } - northbridge_romstage_finalize(boot_mode==2); - - post_code(0x3f); +int mainboard_should_reset_usb(int s3resume) +{ + return !s3resume; } diff --git a/src/mainboard/lenovo/t420s/romstage.c b/src/mainboard/lenovo/t420s/romstage.c index c0204582a7..e5e14164e8 100644 --- a/src/mainboard/lenovo/t420s/romstage.c +++ b/src/mainboard/lenovo/t420s/romstage.c @@ -70,3 +70,7 @@ void mainboard_get_spd(spd_raw_data *spd) { void mainboard_early_init(int s3resume) { } + +void mainboard_config_superio(void) +{ +} diff --git a/src/mainboard/lenovo/t430s/romstage.c b/src/mainboard/lenovo/t430s/romstage.c index 4a99b6d7d6..d1bcc3bf1d 100644 --- a/src/mainboard/lenovo/t430s/romstage.c +++ b/src/mainboard/lenovo/t430s/romstage.c @@ -70,3 +70,7 @@ void mainboard_get_spd(spd_raw_data *spd) { void mainboard_early_init(int s3resume) { } + +void mainboard_config_superio(void) +{ +} diff --git a/src/mainboard/lenovo/t520/romstage.c b/src/mainboard/lenovo/t520/romstage.c index 59bad9a1bf..4c41665333 100644 --- a/src/mainboard/lenovo/t520/romstage.c +++ b/src/mainboard/lenovo/t520/romstage.c @@ -85,3 +85,7 @@ void mainboard_get_spd(spd_raw_data *spd) { void mainboard_early_init(int s3resume) { } + +void mainboard_config_superio(void) +{ +} diff --git a/src/mainboard/lenovo/t530/romstage.c b/src/mainboard/lenovo/t530/romstage.c index 23f2704391..7bbb2a8b15 100644 --- a/src/mainboard/lenovo/t530/romstage.c +++ b/src/mainboard/lenovo/t530/romstage.c @@ -72,3 +72,7 @@ void mainboard_get_spd(spd_raw_data *spd) { void mainboard_early_init(int s3resume) { } + +void mainboard_config_superio(void) +{ +} diff --git a/src/mainboard/lenovo/x220/romstage.c b/src/mainboard/lenovo/x220/romstage.c index 59b3728665..db227829e1 100644 --- a/src/mainboard/lenovo/x220/romstage.c +++ b/src/mainboard/lenovo/x220/romstage.c @@ -82,3 +82,7 @@ void mainboard_get_spd(spd_raw_data *spd) { void mainboard_early_init(int s3resume) { } + +void mainboard_config_superio(void) +{ +} diff --git a/src/mainboard/lenovo/x230/romstage.c b/src/mainboard/lenovo/x230/romstage.c index cf3eb5a76b..9aa37e330c 100644 --- a/src/mainboard/lenovo/x230/romstage.c +++ b/src/mainboard/lenovo/x230/romstage.c @@ -85,3 +85,7 @@ void mainboard_get_spd(spd_raw_data *spd) { void mainboard_early_init(int s3resume) { } + +void mainboard_config_superio(void) +{ +} diff --git a/src/mainboard/samsung/lumpy/gpio.h b/src/mainboard/samsung/lumpy/gpio.h index 58b61b6fe1..e5737bb0f8 100644 --- a/src/mainboard/samsung/lumpy/gpio.h +++ b/src/mainboard/samsung/lumpy/gpio.h @@ -309,7 +309,7 @@ const struct pch_gpio_set2 pch_gpio_set2_reset = { .gpio43 = GPIO_RESET_RSMRST, }; -const struct pch_gpio_map lumpy_gpio_map = { +const struct pch_gpio_map mainboard_gpio_map = { .set1 = { .mode = &pch_gpio_set1_mode, .direction = &pch_gpio_set1_direction, diff --git a/src/mainboard/samsung/lumpy/romstage.c b/src/mainboard/samsung/lumpy/romstage.c index 5f37583fc7..b91573bb42 100644 --- a/src/mainboard/samsung/lumpy/romstage.c +++ b/src/mainboard/samsung/lumpy/romstage.c @@ -34,7 +34,6 @@ #include <southbridge/intel/bd82x6x/pch.h> #include <southbridge/intel/bd82x6x/gpio.h> #include <arch/cpu.h> -#include <cpu/x86/bist.h> #include <cpu/x86/msr.h> #include <halt.h> #include "option_table.h" @@ -43,7 +42,7 @@ #include <superio/smsc/lpc47n207/lpc47n207.h> #endif -static void pch_enable_lpc(void) +void pch_enable_lpc(void) { /* Set COM1/COM2 decode range */ pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x0010); @@ -64,7 +63,7 @@ static void pch_enable_lpc(void) #endif } -static void rcba_config(void) +void rcba_config(void) { u32 reg32; @@ -115,23 +114,9 @@ static void rcba_config(void) RCBA32(FD) = reg32; } -static void early_pch_init(void) +void mainboard_fill_pei_data(struct pei_data *pei_data) { - u8 reg8; - - // reset rtc power status - reg8 = pci_read_config8(PCH_LPC_DEV, 0xa4); - reg8 &= ~(1 << 2); - pci_write_config8(PCH_LPC_DEV, 0xa4, reg8); -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - int boot_mode = 0; - int cbmem_was_initted; - - struct pei_data pei_data = { + struct pei_data pei_data_template = { .pei_version = PEI_VERSION, .mchbar = (uintptr_t)DEFAULT_MCHBAR, .dmibar = (uintptr_t)DEFAULT_DMIBAR, @@ -174,58 +159,11 @@ void main(unsigned long bist) { 0, 4, 0x0000 }, /* P13: Empty */ }, }; - + *pei_data = pei_data_template; typedef const uint8_t spd_blob[256]; spd_blob *spd_data; size_t spd_file_len; - - timestamp_init(get_initial_timestamp()); - timestamp_add_now(TS_START_ROMSTAGE); - - if (bist == 0) - enable_lapic(); - - pch_enable_lpc(); - - /* Enable GPIOs */ - pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE|1); - pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10); - setup_pch_gpios(&lumpy_gpio_map); - - console_init(); - - init_bootmode_straps(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - if (MCHBAR16(SSKPD) == 0xCAFE) { - printk(BIOS_DEBUG, "soft reset detected\n"); - boot_mode = 1; - - /* System is not happy after keyboard reset... */ - printk(BIOS_DEBUG, "Issuing CF9 warm reset\n"); - outb(0x6, 0xcf9); - halt(); - } - - /* Perform some early chipset initialization required - * before RAM initialization can work - */ - sandybridge_early_initialization(SANDYBRIDGE_MOBILE); - printk(BIOS_DEBUG, "Back from sandybridge_early_initialization()\n"); - - boot_mode = southbridge_detect_s3_resume() ? 2 : 0; - - post_code(0x38); - /* Enable SPD ROMs and DDR-III DRAM */ - enable_smbus(); - - /* Prepare USB controller early in S3 resume */ - if (boot_mode == 2) - enable_usb_bar(); - u32 gp_lvl2 = inl(DEFAULT_GPIOBASE + 0x38); u8 gpio33, gpio41, gpio49; gpio33 = (gp_lvl2 >> (33-32)) & 1; @@ -271,37 +209,19 @@ void main(unsigned long bist) if (spd_file_len < (spd_index + 1) * 256) die("Missing SPD data."); // leave onboard dimm address at f0, and copy spd data there. - memcpy(pei_data.spd_data[0], spd_data[spd_index], 256); - - post_code(0x39); - pei_data.boot_mode = boot_mode; - timestamp_add_now(TS_BEFORE_INITRAM); - sdram_initialize(&pei_data); - - timestamp_add_now(TS_AFTER_INITRAM); - post_code(0x3a); - /* Perform some initialization that must run before stage2 */ - early_pch_init(); - post_code(0x3b); - - rcba_config(); - post_code(0x3c); + memcpy(pei_data->spd_data[0], spd_data[spd_index], 256); +} - quick_ram_check(); - post_code(0x3e); +void mainboard_early_init(int s3resume) +{ + init_bootmode_straps(); +} - cbmem_was_initted = !cbmem_recovery(boot_mode==2); - if (boot_mode!=2) - save_mrc_data(&pei_data); +int mainboard_should_reset_usb(int s3resume) +{ + return !s3resume; +} - if (boot_mode == 2 && !cbmem_was_initted) { - /* Failed S3 resume, reset to come up cleanly */ - outb(0x6, 0xcf9); - halt(); - } - northbridge_romstage_finalize(boot_mode==2); - post_code(0x3f); - if (CONFIG_LPC_TPM) { - init_tpm(boot_mode == 2); - } +void mainboard_config_superio(void) +{ } diff --git a/src/mainboard/samsung/stumpy/gpio.h b/src/mainboard/samsung/stumpy/gpio.h index 74d095b0da..13711558ef 100644 --- a/src/mainboard/samsung/stumpy/gpio.h +++ b/src/mainboard/samsung/stumpy/gpio.h @@ -285,7 +285,7 @@ const struct pch_gpio_set3 pch_gpio_set3_level = { .gpio75 = GPIO_LEVEL_LOW, }; -const struct pch_gpio_map stumpy_gpio_map = { +const struct pch_gpio_map mainboard_gpio_map = { .set1 = { .mode = &pch_gpio_set1_mode, .direction = &pch_gpio_set1_direction, diff --git a/src/mainboard/samsung/stumpy/romstage.c b/src/mainboard/samsung/stumpy/romstage.c index bf1ddb37be..2caf23e86e 100644 --- a/src/mainboard/samsung/stumpy/romstage.c +++ b/src/mainboard/samsung/stumpy/romstage.c @@ -34,7 +34,6 @@ #include <southbridge/intel/bd82x6x/pch.h> #include <southbridge/intel/bd82x6x/gpio.h> #include <arch/cpu.h> -#include <cpu/x86/bist.h> #include <cpu/x86/msr.h> #include <halt.h> #include <tpm.h> @@ -56,7 +55,7 @@ #define SERIAL_DEV PNP_DEV(0x2e, IT8772F_SP1) #define GPIO_DEV PNP_DEV(0x2e, IT8772F_GPIO) -static void pch_enable_lpc(void) +void pch_enable_lpc(void) { /* Set COM1/COM2 decode range */ pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x0010); @@ -76,7 +75,7 @@ static void pch_enable_lpc(void) #endif } -static void rcba_config(void) +void rcba_config(void) { u32 reg32; @@ -124,16 +123,6 @@ static void rcba_config(void) RCBA32(FD) = reg32; } -static void early_pch_init(void) -{ - u8 reg8; - - // reset rtc power status - reg8 = pci_read_config8(PCH_LPC_DEV, 0xa4); - reg8 &= ~(1 << 2); - pci_write_config8(PCH_LPC_DEV, 0xa4, reg8); -} - static void setup_sio_gpios(void) { /* @@ -168,13 +157,9 @@ static void setup_sio_gpios(void) it8772f_gpio_setup(DUMMY_DEV, 6, 0x00, 0x00, 0x00, 0x00, 0x00); } -#include <cpu/intel/romstage.h> -void main(unsigned long bist) +void mainboard_fill_pei_data(struct pei_data *pei_data) { - int boot_mode = 0; - int cbmem_was_initted; - - struct pei_data pei_data = { + struct pei_data pei_data_template = { .pei_version = PEI_VERSION, .mchbar = (uintptr_t)DEFAULT_MCHBAR, .dmibar = (uintptr_t)DEFAULT_DMIBAR, @@ -217,56 +202,17 @@ void main(unsigned long bist) { 1, 5, 0x0040 }, /* P13: Back port (OC5) */ }, }; + *pei_data = pei_data_template; +} - timestamp_init(get_initial_timestamp()); - timestamp_add_now(TS_START_ROMSTAGE); - - if (bist == 0) - enable_lapic(); - - pch_enable_lpc(); - - /* Enable GPIOs */ - pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE|1); - pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10); - setup_pch_gpios(&stumpy_gpio_map); - setup_sio_gpios(); - - /* Early SuperIO setup */ - it8772f_ac_resume_southbridge(DUMMY_DEV); - ite_kill_watchdog(GPIO_DEV); - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - +void mainboard_early_init(int s3resume) +{ init_bootmode_straps(); +} - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - if (MCHBAR16(SSKPD) == 0xCAFE) { - printk(BIOS_DEBUG, "soft reset detected\n"); - boot_mode = 1; - - /* System is not happy after keyboard reset... */ - printk(BIOS_DEBUG, "Issuing CF9 warm reset\n"); - outb(0x6, 0xcf9); - halt(); - } - - /* Perform some early chipset initialization required - * before RAM initialization can work - */ - sandybridge_early_initialization(SANDYBRIDGE_MOBILE); - printk(BIOS_DEBUG, "Back from sandybridge_early_initialization()\n"); - - boot_mode = southbridge_detect_s3_resume() ? 2 : 0; - - post_code(0x38); - /* Enable SPD ROMs and DDR-III DRAM */ - enable_smbus(); - - /* Prepare USB controller early in S3 resume */ - if (boot_mode == 2) { +int mainboard_should_reset_usb(int s3resume) +{ + if (s3resume) { /* * For Stumpy the back USB ports are reset on resume * so default to resetting the controller to make the @@ -275,48 +221,26 @@ void main(unsigned long bist) * the device power loss better in the future. */ u8 magic = cmos_read(CMOS_USB_RESET_DISABLE); - if (magic == USB_RESET_DISABLE_MAGIC) { printk(BIOS_DEBUG, "USB Controller Reset Disabled\n"); - enable_usb_bar(); + return 0; } else { printk(BIOS_DEBUG, "USB Controller Reset Enabled\n"); + return 1; } } else { /* Ensure USB reset on resume is enabled at boot */ cmos_write(0, CMOS_USB_RESET_DISABLE); + return 1; } +} - post_code(0x39); - pei_data.boot_mode = boot_mode; - timestamp_add_now(TS_BEFORE_INITRAM); - sdram_initialize(&pei_data); - - timestamp_add_now(TS_AFTER_INITRAM); - post_code(0x3a); - /* Perform some initialization that must run before stage2 */ - early_pch_init(); - post_code(0x3b); - - rcba_config(); - post_code(0x3c); - - quick_ram_check(); - post_code(0x3e); - - cbmem_was_initted = !cbmem_recovery(boot_mode==2); - if (boot_mode!=2) - save_mrc_data(&pei_data); - - if (boot_mode==2 && !cbmem_was_initted) { - /* Failed S3 resume, reset to come up cleanly */ - outb(0x6, 0xcf9); - halt(); - } - northbridge_romstage_finalize(boot_mode==2); +void mainboard_config_superio(void) +{ + setup_sio_gpios(); - post_code(0x3f); - if (CONFIG_LPC_TPM) { - init_tpm(boot_mode == 2); - } + /* Early SuperIO setup */ + it8772f_ac_resume_southbridge(DUMMY_DEV); + ite_kill_watchdog(GPIO_DEV); + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); } diff --git a/src/northbridge/intel/sandybridge/Makefile.inc b/src/northbridge/intel/sandybridge/Makefile.inc index 2d68c03d87..90abe4dab6 100644 --- a/src/northbridge/intel/sandybridge/Makefile.inc +++ b/src/northbridge/intel/sandybridge/Makefile.inc @@ -28,11 +28,10 @@ romstage-y += ram_calc.c romstage-$(CONFIG_NORTHBRIDGE_INTEL_IVYBRIDGE_MRC) += raminit_mrc.c romstage-$(CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE_MRC) += raminit_mrc.c romstage-$(CONFIG_NORTHBRIDGE_INTEL_IVYBRIDGE) += raminit.c -romstage-$(CONFIG_NORTHBRIDGE_INTEL_IVYBRIDGE) += romstage.c romstage-$(CONFIG_NORTHBRIDGE_INTEL_IVYBRIDGE) += ../../../device/dram/ddr3.c romstage-$(CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE) += raminit.c -romstage-$(CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE) += romstage.c romstage-$(CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE) += ../../../device/dram/ddr3.c +romstage-y += romstage.c romstage-y += mrccache.c romstage-y += iommu.c romstage-y += early_init.c diff --git a/src/northbridge/intel/sandybridge/raminit.c b/src/northbridge/intel/sandybridge/raminit.c index aae963e239..7490ff7f29 100644 --- a/src/northbridge/intel/sandybridge/raminit.c +++ b/src/northbridge/intel/sandybridge/raminit.c @@ -24,12 +24,14 @@ #include <cbfs.h> #include <halt.h> #include <ip_checksum.h> +#include <timestamp.h> #include <pc80/mc146818rtc.h> #include <device/pci_def.h> #include "raminit_native.h" #include "sandybridge.h" #include <delay.h> #include <lib.h> +#include <device/device.h> /* Management Engine is in the southbridge */ #include "southbridge/intel/bd82x6x/me.h" @@ -37,6 +39,7 @@ #include "southbridge/intel/bd82x6x/smbus.h" #include "arch/cpu.h" #include "cpu/x86/msr.h" +#include <northbridge/intel/sandybridge/chip.h> /* FIXME: no ECC support. */ /* FIXME: no support for 3-channel chipsets. */ @@ -4034,3 +4037,44 @@ void init_dram_ddr3(spd_raw_data * spds, int mobile, int min_tck, halt(); } } + +#define HOST_BRIDGE PCI_DEVFN(0, 0) +#define DEFAULT_TCK TCK_800MHZ + +static unsigned int get_mem_min_tck(void) +{ + const struct device *dev; + const struct northbridge_intel_sandybridge_config *cfg; + + dev = dev_find_slot(0, HOST_BRIDGE); + if (!(dev && dev->chip_info)) + return DEFAULT_TCK; + + cfg = dev->chip_info; + + /* If this is zero, it just means devicetree.cb didn't set it */ + if (cfg->max_mem_clock_mhz == 0) + return DEFAULT_TCK; + + if (cfg->max_mem_clock_mhz >= 800) + return TCK_800MHZ; + else if (cfg->max_mem_clock_mhz >= 666) + return TCK_666MHZ; + else if (cfg->max_mem_clock_mhz >= 533) + return TCK_533MHZ; + return TCK_400MHZ; +} + +void perform_raminit(int s3resume) +{ + spd_raw_data spd[4]; + + post_code(0x3a); + + memset (spd, 0, sizeof (spd)); + mainboard_get_spd(spd); + + timestamp_add_now(TS_BEFORE_INITRAM); + + init_dram_ddr3(spd, 1, get_mem_min_tck(), s3resume); +} diff --git a/src/northbridge/intel/sandybridge/raminit.h b/src/northbridge/intel/sandybridge/raminit.h index 5bda2ef2b6..4e684ec409 100644 --- a/src/northbridge/intel/sandybridge/raminit.h +++ b/src/northbridge/intel/sandybridge/raminit.h @@ -27,6 +27,7 @@ struct sys_info { void sdram_initialize(struct pei_data *pei_data); void save_mrc_data(struct pei_data *pei_data); +void mainboard_fill_pei_data(struct pei_data *pei_data); int fixup_sandybridge_errata(void); #endif /* RAMINIT_H */ diff --git a/src/northbridge/intel/sandybridge/raminit_mrc.c b/src/northbridge/intel/sandybridge/raminit_mrc.c index a370eccd31..162caf6107 100644 --- a/src/northbridge/intel/sandybridge/raminit_mrc.c +++ b/src/northbridge/intel/sandybridge/raminit_mrc.c @@ -25,6 +25,7 @@ #include <pc80/mc146818rtc.h> #include <device/pci_def.h> #include <halt.h> +#include <timestamp.h> #include "raminit.h" #include "pei_data.h" #include "sandybridge.h" @@ -279,3 +280,29 @@ void sdram_initialize(struct pei_data *pei_data) report_memory_config(); } + +void perform_raminit(int s3resume) +{ + int cbmem_was_initted; + struct pei_data pei_data; + + /* Prepare USB controller early in S3 resume */ + if (!mainboard_should_reset_usb(s3resume)) + enable_usb_bar(); + + mainboard_fill_pei_data(&pei_data); + + post_code(0x3a); + pei_data.boot_mode = s3resume ? 2 : 0; + timestamp_add_now(TS_BEFORE_INITRAM); + sdram_initialize(&pei_data); + cbmem_was_initted = !cbmem_recovery(s3resume); + if (!s3resume) + save_mrc_data(&pei_data); + + if (s3resume && !cbmem_was_initted) { + /* Failed S3 resume, reset to come up cleanly */ + outb(0x6, 0xcf9); + halt(); + } +} diff --git a/src/northbridge/intel/sandybridge/raminit_native.h b/src/northbridge/intel/sandybridge/raminit_native.h index b41aa855aa..8f8d057313 100644 --- a/src/northbridge/intel/sandybridge/raminit_native.h +++ b/src/northbridge/intel/sandybridge/raminit_native.h @@ -13,17 +13,15 @@ * GNU General Public License for more details. */ -#ifndef RAMINIT_H -#define RAMINIT_H +#ifndef RAMINIT_NATIVE_H +#define RAMINIT_NATIVE_H +#include "sandybridge.h" #include <device/dram/ddr3.h> /* The order is ch0dimmA, ch0dimmB, ch1dimmA, ch1dimmB. */ void init_dram_ddr3(spd_raw_data *spds, int mobile, int min_tck, int s3resume); void read_spd(spd_raw_data *spd, u8 addr); void mainboard_get_spd(spd_raw_data *spd); -void rcba_config(void); -void pch_enable_lpc(void); -void mainboard_early_init(int s3resume); #endif /* RAMINIT_H */ diff --git a/src/northbridge/intel/sandybridge/romstage.c b/src/northbridge/intel/sandybridge/romstage.c index 3d05f8e3fa..04db608f83 100644 --- a/src/northbridge/intel/sandybridge/romstage.c +++ b/src/northbridge/intel/sandybridge/romstage.c @@ -29,43 +29,23 @@ #include <device/device.h> #include <halt.h> #include <tpm.h> -#include "raminit_native.h" #include <northbridge/intel/sandybridge/chip.h> #include "southbridge/intel/bd82x6x/pch.h" #include "southbridge/intel/bd82x6x/gpio.h" -#define HOST_BRIDGE PCI_DEVFN(0, 0) -#define DEFAULT_TCK TCK_800MHZ - -static unsigned int get_mem_min_tck(void) +static void early_pch_init(void) { - const struct device *dev; - const struct northbridge_intel_sandybridge_config *cfg; - - dev = dev_find_slot(0, HOST_BRIDGE); - if (!(dev && dev->chip_info)) - return DEFAULT_TCK; - - cfg = dev->chip_info; - - /* If this is zero, it just means devicetree.cb didn't set it */ - if (cfg->max_mem_clock_mhz == 0) - return DEFAULT_TCK; - - if (cfg->max_mem_clock_mhz >= 800) - return TCK_800MHZ; - else if (cfg->max_mem_clock_mhz >= 666) - return TCK_666MHZ; - else if (cfg->max_mem_clock_mhz >= 533) - return TCK_533MHZ; - else - return TCK_400MHZ; + u8 reg8; + + // reset rtc power status + reg8 = pci_read_config8(PCH_LPC_DEV, 0xa4); + reg8 &= ~(1 << 2); + pci_write_config8(PCH_LPC_DEV, 0xa4, reg8); } void main(unsigned long bist) { int s3resume = 0; - spd_raw_data spd[4]; if (MCHBAR16(SSKPD) == 0xCAFE) { outb(0x6, 0xcf9); @@ -86,7 +66,14 @@ void main(unsigned long bist) setup_pch_gpios(&mainboard_gpio_map); - early_usb_init(mainboard_usb_ports); + /* Initialize superio */ + mainboard_config_superio(); + + /* USB is inited in MRC if MRC is used. */ + if (!(CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE_MRC + || CONFIG_NORTHBRIDGE_INTEL_IVYBRIDGE_MRC)) { + early_usb_init(mainboard_usb_ports); + } /* Initialize console device(s) */ console_init(); @@ -111,27 +98,25 @@ void main(unsigned long bist) post_code(0x39); - post_code(0x3a); - - memset (spd, 0, sizeof (spd)); - mainboard_get_spd(spd); - - timestamp_add_now(TS_BEFORE_INITRAM); - - init_dram_ddr3(spd, 1, get_mem_min_tck(), s3resume); + perform_raminit(s3resume); timestamp_add_now(TS_AFTER_INITRAM); + + post_code(0x3b); + /* Perform some initialization that must run before stage2 */ + early_pch_init(); post_code(0x3c); southbridge_configure_default_intmap(); rcba_config(); + post_code(0x3d); northbridge_romstage_finalize(s3resume); -#if CONFIG_LPC_TPM - init_tpm(s3resume); -#endif + if (CONFIG_LPC_TPM) { + init_tpm(s3resume); + } post_code(0x3f); } diff --git a/src/northbridge/intel/sandybridge/sandybridge.h b/src/northbridge/intel/sandybridge/sandybridge.h index 0a1f20a06f..570e1f7864 100644 --- a/src/northbridge/intel/sandybridge/sandybridge.h +++ b/src/northbridge/intel/sandybridge/sandybridge.h @@ -215,8 +215,16 @@ void dump_pci_devices(void); void dump_spd_registers(void); void dump_mem(unsigned start, unsigned end); void report_platform_info(void); + #endif /* !__SMM__ */ +void rcba_config(void); +void pch_enable_lpc(void); +void mainboard_early_init(int s3resume); +void mainboard_config_superio(void); +int mainboard_should_reset_usb(int s3resume); +void perform_raminit(int s3resume); + #if ENV_RAMSTAGE #include <device/device.h> |