diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/soc/intel/common/block/include/intelblocks/pmclib.h | 195 | ||||
| -rw-r--r-- | src/soc/intel/common/block/pmc/Kconfig | 6 | ||||
| -rw-r--r-- | src/soc/intel/common/block/pmc/Makefile.inc | 5 | ||||
| -rw-r--r-- | src/soc/intel/common/block/pmc/pmclib.c | 492 |
4 files changed, 698 insertions, 0 deletions
diff --git a/src/soc/intel/common/block/include/intelblocks/pmclib.h b/src/soc/intel/common/block/include/intelblocks/pmclib.h new file mode 100644 index 0000000000..4093599aca --- /dev/null +++ b/src/soc/intel/common/block/include/intelblocks/pmclib.h @@ -0,0 +1,195 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2017 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef SOC_INTEL_COMMON_BLOCK_PMCLIB_H +#define SOC_INTEL_COMMON_BLOCK_PMCLIB_H + +#include <stdint.h> + +/* Forward declare the power state struct here */ +struct chipset_power_state; + +/* + * This is implemented as weak function in common pmc lib. + * Clears all power management related registers as the boot + * flow is past the point of needing to maintain the values. + */ +void soc_clear_pm_registers(uintptr_t pmc_bar); + +/* + * This is implemented as weak function in common pmc lib and deals with any + * soc specific quarks. Returns SMI status bits. + */ +uint32_t soc_get_smi_status(uint32_t generic_sts); + +/* + * This function is specific to soc and is defined as weak in common + * pmclib file. SOC code can implement it for any special condition + * specific to the soc e.g. in SKL in handles deep S3 scenerio. + * Return ACPI_SX values to indicate the previous sleep state. + */ +int soc_prev_sleep_state(const struct chipset_power_state *ps, + int prev_sleep_state); +/* + * Function to print, clear, and return SMI status bits in SMI_STS + * register. This function internally calls pmc_reset_smi_status with + * extra functionality of printing the set smi_sts bits. + */ +uint32_t pmc_clear_smi_status(void); + +/* + * Function to return the 32 bit value of SMI control and enable register + * used to check which smi's are enabled. + */ +uint32_t pmc_get_smi_en(void); + +/* Enable SMI event in SMI control and enable register */ +void pmc_enable_smi(uint32_t mask); + +/* Disable SMI event */ +void pmc_disable_smi(uint32_t mask); + +/* Enable events in PM1 control register */ +void pmc_enable_pm1_control(uint32_t mask); + +/* Disable events in PM1 control register*/ +void pmc_disable_pm1_control(uint32_t mask); + +/* Set the PM1 register to events in PM1_STS_EN register */ +void pmc_enable_pm1(uint16_t events); + +/* Print, clear, and return PM1 status */ +uint16_t pmc_clear_pm1_status(void); + +/* TCO */ + +/* Print, clear, and return TCO status */ +uint32_t pmc_clear_tco_status(void); + +/* + * This function returns array of string which represents + * names for the TCO status bits. Size of the array is + * returned as an output parameter. + */ +const char * const *soc_tco_sts_array(size_t *a); + +/* + * Resets the tco status registers. This function clears the tco_sts register + * and returns the sts and enable bits set. + */ +uint32_t soc_reset_tco_status(void); + + +/* GPE */ + +/* + * We have gpe0a_en/sts, gpe0b_en/sts, gpe0c_en/sts and gpe0d_en/sts + * registers. gpe0a_en is symmetrical to the general purpose event + * 0a status register and have all the enable bits for + * gpe's. Other gpe registers gpe0b_en, gpe0c_en and + * gpe0d_en are symmetrical to general purpose event status + * registers and reads/writes to those register will result in + * the transaction being forwarded to the corresponding GPIO + * community based on the GPIO_GPE_CFG.gpe0_dw1, GPIO_GPE_CFG.gpe0_dw2 + * and GPIO_GPE_CFG.gpe0_dw3 register configuration. + * + * STS registers are symmetrical to event enable registers. + * For gpe0a_sts register if the corresponding _EN bit is set in gpe0a_en, + * then when the STS bit get set, the PMC will generate a Wake Event. + * Once back in an S0 state (or if already in an S0 state when the event + * occurs), the PMC will also generate an SCI if the SCI_EN bit is set, + * or an SMI# if the SCI_EN bit is not set. Other gpe registers gpe0b_sts, + * gpe0c_sts and gpe0d_sts are symmetrical to general purpose event enable + * registers and reads/writes to those register will result in + * the transaction being forwarded to the corresponding GPIO + * community based on the GPIO_GPE_CFG.gpe0_dw1, GPIO_GPE_CFG.gpe0_dw2 and + * GPIO_GPE_CFG.gpe0_dw3 register configuration. + */ +/* Enable a standard GPE in gpe0_en register */ +void pmc_enable_gpe(uint32_t mask); +/* Disable a standard GPE in gpe0a_en register */ +void pmc_disable_gpe(uint32_t mask); +/* Disable all GPE's in gpe0a_en register */ +void pmc_disable_all_gpe(void); +/* Clear all GPE status and return "standard" GPE event status */ +uint32_t pmc_clear_gpe_status(void); +/* Clear status bits in Power and Reset Status (PRSTS) register */ +void pmc_clear_status(void); +/* Clear the gpio gpe0 status bits in ACPI registers */ +void pmc_clear_gpi_gpe_sts(void); + +/* + * Enable or disable global reset. If global reset is enabled, hard reset and + * soft reset will trigger global reset, where both host and TXE are reset. + * This is cleared on cold boot, hard reset, soft reset and Sx. + */ +void pmc_global_reset_enable(bool enable); +/* + * If possible, lock 0xcf9. Once the register is locked, it can't be changed. + * This lock is reset on cold boot, hard reset, soft reset and Sx. + */ +void pmc_global_reset_lock(void); + +/* Rewrite the gpe0 registers in cbmem to proper values as per routing table */ +void pmc_fixup_power_state(void); + +/* + * Reads and prints ACPI specific PM registers which are common across + * chipsets. Returns the previous sleep state which is one of ACPI_SX values. + */ +int pmc_fill_power_state(struct chipset_power_state *ps); + +/* + * Sets the gpe routing table by properly programming the GPE_CFG + * and the MISCCFG registers. This function calls soc specific + * soc_get_gpe_configs which reads the devicetree info + * and populates the dw variables and also returns the bit offset + * in GPIO_CFG register which is assigned to ACPI register. + */ +void pmc_gpe_init(void); + +/* Power Management Utility Functions. */ + +/* Returns PMC base address */ +uintptr_t soc_read_pmc_base(void); + +/* + * This function returns array of string which represents + * names for the SMI status register bits. Size of the array is + * returned as an output parameter. + */ +const char * const *soc_smi_sts_array(size_t *a); + +/* + * This function returns array of string which represents + * names for the General purpose Event status register bits. + * Size of the array is returned as an output parameter. + */ +const char * const *soc_gpe_sts_array(size_t *a); + +/* + * This function gets the gpe0 dwX values from devicetree + * for pmc_gpe_init which will use those to set the GPE_CFG + * register. + */ +void soc_get_gpe_configs(uint8_t *dw0, uint8_t *dw1, uint8_t *dw2); + +/* + * Reads soc specific power management crtitical registers, fills + * chipset_power_state structure variable and prints. + */ +void soc_fill_power_state(struct chipset_power_state *ps); + +#endif /* SOC_INTEL_COMMON_BLOCK_PMCLIB_H */ diff --git a/src/soc/intel/common/block/pmc/Kconfig b/src/soc/intel/common/block/pmc/Kconfig new file mode 100644 index 0000000000..4e10f93537 --- /dev/null +++ b/src/soc/intel/common/block/pmc/Kconfig @@ -0,0 +1,6 @@ +config SOC_INTEL_COMMON_BLOCK_PMC + depends on SOC_INTEL_COMMON_BLOCK_GPIO + bool + help + Intel Processor common code for Power Management controller(PMC) + subsystem diff --git a/src/soc/intel/common/block/pmc/Makefile.inc b/src/soc/intel/common/block/pmc/Makefile.inc new file mode 100644 index 0000000000..40fcba10f7 --- /dev/null +++ b/src/soc/intel/common/block/pmc/Makefile.inc @@ -0,0 +1,5 @@ +bootblock-$(CONFIG_SOC_INTEL_COMMON_BLOCK_PMC) += pmclib.c +romstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_PMC) += pmclib.c +ramstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_PMC) += pmclib.c +smm-$(CONFIG_SOC_INTEL_COMMON_BLOCK_PMC) += pmclib.c +verstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_PMC) += pmclib.c diff --git a/src/soc/intel/common/block/pmc/pmclib.c b/src/soc/intel/common/block/pmc/pmclib.c new file mode 100644 index 0000000000..e741332f88 --- /dev/null +++ b/src/soc/intel/common/block/pmc/pmclib.c @@ -0,0 +1,492 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2017 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/io.h> +#include <cbmem.h> +#include <console/console.h> +#include <halt.h> +#include <intelblocks/pmclib.h> +#include <intelblocks/gpio.h> +#include <soc/pm.h> +#include <timer.h> +#include <vboot/vboot_common.h> + +static void print_num_status_bits(int num_bits, uint32_t status, + const char *const bit_names[]) +{ + int i; + + if (!status) + return; + + for (i = num_bits - 1; i >= 0; i--) { + if (status & (1 << i)) { + if (bit_names[i]) + printk(BIOS_DEBUG, "%s ", bit_names[i]); + else + printk(BIOS_DEBUG, "BIT%d ", i); + } + } +} + +__attribute__ ((weak)) uint32_t soc_get_smi_status(uint32_t generic_sts) +{ + return generic_sts; +} + +static uint32_t pmc_reset_smi_status(void) +{ + uint32_t smi_sts = inl(ACPI_BASE_ADDRESS + SMI_STS); + outl(smi_sts, ACPI_BASE_ADDRESS + SMI_STS); + + return soc_get_smi_status(smi_sts); +} + +static uint32_t print_smi_status(uint32_t smi_sts) +{ + size_t array_size; + const char *const *smi_arr; + + if (!smi_sts) + return 0; + + printk(BIOS_DEBUG, "SMI_STS: "); + + smi_arr = soc_smi_sts_array(&array_size); + + print_num_status_bits(array_size, smi_sts, smi_arr); + printk(BIOS_DEBUG, "\n"); + + return smi_sts; +} + +uint32_t pmc_clear_smi_status(void) +{ + uint32_t sts = pmc_reset_smi_status(); + + return print_smi_status(sts); +} + +uint32_t pmc_get_smi_en(void) +{ + return inl(ACPI_BASE_ADDRESS + SMI_EN); +} + +void pmc_enable_smi(uint32_t mask) +{ + uint32_t smi_en = inl(ACPI_BASE_ADDRESS + SMI_EN); + smi_en |= mask; + outl(smi_en, ACPI_BASE_ADDRESS + SMI_EN); +} + +void pmc_disable_smi(uint32_t mask) +{ + uint32_t smi_en = inl(ACPI_BASE_ADDRESS + SMI_EN); + smi_en &= ~mask; + outl(smi_en, ACPI_BASE_ADDRESS + SMI_EN); +} + +/* PM1 */ +void pmc_enable_pm1(uint16_t events) +{ + outw(events, ACPI_BASE_ADDRESS + PM1_EN); +} + +void pmc_enable_pm1_control(uint32_t mask) +{ + uint32_t pm1_cnt = inl(ACPI_BASE_ADDRESS + PM1_CNT); + pm1_cnt |= mask; + outl(pm1_cnt, ACPI_BASE_ADDRESS + PM1_CNT); +} + +void pmc_disable_pm1_control(uint32_t mask) +{ + uint32_t pm1_cnt = inl(ACPI_BASE_ADDRESS + PM1_CNT); + pm1_cnt &= ~mask; + outl(pm1_cnt, ACPI_BASE_ADDRESS + PM1_CNT); +} + +static uint16_t reset_pm1_status(void) +{ + uint16_t pm1_sts = inw(ACPI_BASE_ADDRESS + PM1_STS); + outw(pm1_sts, ACPI_BASE_ADDRESS + PM1_STS); + return pm1_sts; +} + +static uint16_t print_pm1_status(uint16_t pm1_sts) +{ + static const char *const pm1_sts_bits[] = { + [0] = "TMROF", + [5] = "GBL", + [8] = "PWRBTN", + [10] = "RTC", + [11] = "PRBTNOR", + [13] = "USB", + [14] = "PCIEXPWAK", + [15] = "WAK", + }; + + if (!pm1_sts) + return 0; + + printk(BIOS_SPEW, "PM1_STS: "); + print_num_status_bits(ARRAY_SIZE(pm1_sts_bits), pm1_sts, pm1_sts_bits); + printk(BIOS_SPEW, "\n"); + + return pm1_sts; +} + +uint16_t pmc_clear_pm1_status(void) +{ + return print_pm1_status(reset_pm1_status()); +} + +/* TCO */ + +static uint32_t print_tco_status(uint32_t tco_sts) +{ + size_t array_size; + const char *const *tco_arr; + + if (!tco_sts) + return 0; + + printk(BIOS_DEBUG, "TCO_STS: "); + + tco_arr = soc_tco_sts_array(&array_size); + + print_num_status_bits(array_size, tco_sts, tco_arr); + printk(BIOS_DEBUG, "\n"); + + return tco_sts; +} + +uint32_t pmc_clear_tco_status(void) +{ + return print_tco_status(soc_reset_tco_status()); +} + +/* GPE */ +void pmc_enable_gpe(uint32_t mask) +{ + uint32_t gpe0a_en = inl(ACPI_BASE_ADDRESS + GPE0_EN(GPE_STD)); + gpe0a_en |= mask; + outl(gpe0a_en, ACPI_BASE_ADDRESS + GPE0_EN(GPE_STD)); +} + +void pmc_disable_gpe(uint32_t mask) +{ + uint32_t gpe0a_en = inl(ACPI_BASE_ADDRESS + GPE0_EN(GPE_STD)); + gpe0a_en &= ~mask; + outl(gpe0a_en, ACPI_BASE_ADDRESS + GPE0_EN(GPE_STD)); +} + +void pmc_disable_all_gpe(void) +{ + pmc_disable_gpe(~0); +} + +/* Clear the gpio gpe0 status bits in ACPI registers */ +void pmc_clear_gpi_gpe_sts(void) +{ + int i; + + for (i = 0; i < GPE0_REG_MAX; i++) { + /* This is reserved GPE block and specific to chipset */ + if (i == GPE_STD) + continue; + uint32_t gpe_sts = inl(ACPI_BASE_ADDRESS + GPE0_STS(i)); + outl(gpe_sts, ACPI_BASE_ADDRESS + GPE0_STS(i)); + } +} + +static uint32_t reset_gpe_status(void) +{ + uint32_t gpe_sts = inl(ACPI_BASE_ADDRESS + GPE0_STS(GPE_STD)); + outl(gpe_sts, ACPI_BASE_ADDRESS + GPE0_STS(GPE_STD)); + return gpe_sts; +} + +static uint32_t print_gpe_sts(uint32_t gpe_sts) +{ + size_t array_size; + const char *const *sts_arr; + + if (!gpe_sts) + return gpe_sts; + + printk(BIOS_DEBUG, "GPE0a_STS: "); + + sts_arr = soc_gpe_sts_array(&array_size); + print_num_status_bits(array_size, gpe_sts, sts_arr); + printk(BIOS_DEBUG, "\n"); + + return gpe_sts; +} + +uint32_t pmc_clear_gpe_status(void) +{ + return print_gpe_sts(reset_gpe_status()); +} + +__attribute__ ((weak)) +void soc_clear_pm_registers(uintptr_t pmc_bar) +{ +} + +void pmc_clear_status(void) +{ + uint32_t prsts; + uintptr_t pmc_bar; + + /* Read PMC base address from soc */ + pmc_bar = soc_read_pmc_base(); + + prsts = read32((void *)(pmc_bar + PRSTS)); + write32((void *)(pmc_bar + PRSTS), prsts); + + soc_clear_pm_registers(pmc_bar); +} + +__attribute__ ((weak)) +int soc_prev_sleep_state(const struct chipset_power_state *ps, + int prev_sleep_state) +{ + return prev_sleep_state; +} + +/* + * Returns prev_sleep_state and also prints all power management registers. + * Calls soc_prev_sleep_state which may be impelmented by SOC. + */ +static int pmc_prev_sleep_state(const struct chipset_power_state *ps) +{ + /* Default to S0. */ + int prev_sleep_state = ACPI_S0; + + if (ps->pm1_sts & WAK_STS) { + switch (acpi_sleep_from_pm1(ps->pm1_cnt)) { + case ACPI_S3: + if (IS_ENABLED(CONFIG_HAVE_ACPI_RESUME)) + prev_sleep_state = ACPI_S3; + break; + case ACPI_S5: + prev_sleep_state = ACPI_S5; + break; + } + + /* Clear SLP_TYP. */ + outl(ps->pm1_cnt & ~(SLP_TYP), ACPI_BASE_ADDRESS + PM1_CNT); + } + return soc_prev_sleep_state(ps, prev_sleep_state); +} + +/* + * This function re-writes the gpe0 register values in power state + * cbmem variable. After system wakes from sleep state internal PMC logic + * writes default values in GPE_CFG register which gives a wrong offset to + * calculate the wake reason. So we need to set it again to the routing + * table as per the devicetree. + */ +void pmc_fixup_power_state(void) +{ + int i; + struct chipset_power_state *ps; + + ps = cbmem_find(CBMEM_ID_POWER_STATE); + if (ps == NULL) + return; + + for (i = 0; i < GPE0_REG_MAX; i++) { + ps->gpe0_sts[i] = inl(ACPI_BASE_ADDRESS + GPE0_STS(i)); + ps->gpe0_en[i] = inl(ACPI_BASE_ADDRESS + GPE0_EN(i)); + printk(BIOS_DEBUG, "gpe0_sts[%d]: %08x gpe0_en[%d]: %08x\n", + i, ps->gpe0_sts[i], i, ps->gpe0_en[i]); + } +} + +/* Reads and prints ACPI specific PM registers */ +int pmc_fill_power_state(struct chipset_power_state *ps) +{ + int i; + + ps->pm1_sts = inw(ACPI_BASE_ADDRESS + PM1_STS); + ps->pm1_en = inw(ACPI_BASE_ADDRESS + PM1_EN); + ps->pm1_cnt = inl(ACPI_BASE_ADDRESS + PM1_CNT); + + printk(BIOS_DEBUG, "pm1_sts: %04x pm1_en: %04x pm1_cnt: %08x\n", + ps->pm1_sts, ps->pm1_en, ps->pm1_cnt); + + for (i = 0; i < GPE0_REG_MAX; i++) { + ps->gpe0_sts[i] = inl(ACPI_BASE_ADDRESS + GPE0_STS(i)); + ps->gpe0_en[i] = inl(ACPI_BASE_ADDRESS + GPE0_EN(i)); + printk(BIOS_DEBUG, "gpe0_sts[%d]: %08x gpe0_en[%d]: %08x\n", + i, ps->gpe0_sts[i], i, ps->gpe0_en[i]); + } + + soc_fill_power_state(ps); + + ps->prev_sleep_state = pmc_prev_sleep_state(ps); + printk(BIOS_DEBUG, "prev_sleep_state %d\n", ps->prev_sleep_state); + + return ps->prev_sleep_state; +} + +/* + * If possible, lock 0xcf9. Once the register is locked, it can't be changed. + * This lock is reset on cold boot, hard reset, soft reset and Sx. + */ +void pmc_global_reset_lock(void) +{ + /* Read PMC base address from soc */ + uintptr_t etr = soc_read_pmc_base() + ETR; + uint32_t reg; + + reg = read32((void *)etr); + if (reg & CF9_LOCK) + return; + reg |= CF9_LOCK; + write32((void *)etr, reg); +} + +/* + * Enable or disable global reset. If global reset is enabled, hard reset and + * soft reset will trigger global reset, where both host and TXE are reset. + * This is cleared on cold boot, hard reset, soft reset and Sx. + */ +void pmc_global_reset_enable(bool enable) +{ + /* Read PMC base address from soc */ + uintptr_t etr = soc_read_pmc_base() + ETR; + uint32_t reg; + + reg = read32((void *)etr); + reg = enable ? reg | CF9_GLB_RST : reg & ~CF9_GLB_RST; + write32((void *)etr, reg); +} + +int vboot_platform_is_resuming(void) +{ + if (!(inw(ACPI_BASE_ADDRESS + PM1_STS) & WAK_STS)) + return 0; + + return acpi_sleep_from_pm1(inl(ACPI_BASE_ADDRESS + PM1_CNT)) == ACPI_S3; +} + +/* Read and clear GPE status (defined in arch/acpi.h) */ +int acpi_get_gpe(int gpe) +{ + int bank; + uint32_t mask, sts; + struct stopwatch sw; + int rc = 0; + + if (gpe < 0 || gpe > GPE_MAX) + return -1; + + bank = gpe / 32; + mask = 1 << (gpe % 32); + + /* Wait up to 1ms for GPE status to clear */ + stopwatch_init_msecs_expire(&sw, 1); + do { + if (stopwatch_expired(&sw)) + return rc; + + sts = inl(ACPI_BASE_ADDRESS + GPE0_STS(bank)); + if (sts & mask) { + outl(mask, ACPI_BASE_ADDRESS + GPE0_STS(bank)); + rc = 1; + } + } while (sts & mask); + + return rc; +} + +/* + * The PM1 control is set to S5 when vboot requests a reboot because the power + * state code above may not have collected its data yet. Therefore, set it to + * S5 when vboot requests a reboot. That's necessary if vboot fails in the + * resume path and requests a reboot. This prevents a reboot loop where the + * error is continually hit on the failing vboot resume path. + */ +void vboot_platform_prepare_reboot(void) +{ + const uint16_t port = ACPI_BASE_ADDRESS + PM1_CNT; + outl((inl(port) & ~(SLP_TYP)) | (SLP_TYP_S5 << SLP_TYP_SHIFT), port); +} + +void poweroff(void) +{ + pmc_enable_pm1_control(SLP_EN | (SLP_TYP_S5 << SLP_TYP_SHIFT)); + + /* + * Setting SLP_TYP_S5 in PM1 triggers SLP_SMI, which is handled by SMM + * to transition to S5 state. If halt is called in SMM, then it prevents + * the SMI handler from being triggered and system never enters S5. + */ + if (!ENV_SMM) + halt(); +} + +void pmc_gpe_init(void) +{ + uint32_t gpio_cfg = 0; + uint32_t gpio_cfg_reg; + uint8_t dw0, dw1, dw2; + + /* Read PMC base address from soc. This is implemented in soc */ + uintptr_t pmc_bar = soc_read_pmc_base(); + + /* + * Get the dwX values for pmc gpe settings. + */ + soc_get_gpe_configs(&dw0, &dw1, &dw2); + + const uint32_t gpio_cfg_mask = + (GPE0_DWX_MASK << GPE0_DW_SHIFT(0)) | + (GPE0_DWX_MASK << GPE0_DW_SHIFT(1)) | + (GPE0_DWX_MASK << GPE0_DW_SHIFT(2)); + + /* Making sure that bad values don't bleed into the other fields */ + dw0 &= GPE0_DWX_MASK; + dw1 &= GPE0_DWX_MASK; + dw2 &= GPE0_DWX_MASK; + + /* + * Route the GPIOs to the GPE0 block. Determine that all values + * are different, and if they aren't use the reset values. + */ + if (dw0 == dw1 || dw1 == dw2) { + printk(BIOS_INFO, "PMC: Using default GPE route.\n"); + gpio_cfg = read32((void *)pmc_bar + GPIO_GPE_CFG); + + dw0 = (gpio_cfg >> GPE0_DW_SHIFT(0)) & GPE0_DWX_MASK; + dw1 = (gpio_cfg >> GPE0_DW_SHIFT(1)) & GPE0_DWX_MASK; + dw2 = (gpio_cfg >> GPE0_DW_SHIFT(2)) & GPE0_DWX_MASK; + } else { + gpio_cfg |= (uint32_t) dw0 << GPE0_DW_SHIFT(0); + gpio_cfg |= (uint32_t) dw1 << GPE0_DW_SHIFT(1); + gpio_cfg |= (uint32_t) dw2 << GPE0_DW_SHIFT(2); + } + + gpio_cfg_reg = read32((void *)pmc_bar + GPIO_GPE_CFG) & ~gpio_cfg_mask; + gpio_cfg_reg |= gpio_cfg & gpio_cfg_mask; + + write32((void *)pmc_bar + GPIO_GPE_CFG, gpio_cfg_reg); + + /* Set the routes in the GPIO communities as well. */ + gpio_route_gpe(dw0, dw1, dw2); +} |