diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/soc/intel/apollolake/chip.h | 34 |
1 files changed, 17 insertions, 17 deletions
diff --git a/src/soc/intel/apollolake/chip.h b/src/soc/intel/apollolake/chip.h index 378fccb76b..392f58637a 100644 --- a/src/soc/intel/apollolake/chip.h +++ b/src/soc/intel/apollolake/chip.h @@ -59,10 +59,10 @@ struct soc_intel_apollolake_config { uint8_t pcie_rp_clkreq_pin[MAX_PCIE_PORTS]; /* Enable/disable hot-plug for root ports (0 = disable, 1 = enable). */ - uint8_t pcie_rp_hotplug_enable[MAX_PCIE_PORTS]; + bool pcie_rp_hotplug_enable[MAX_PCIE_PORTS]; /* De-emphasis enable configuration for each PCIe root port */ - uint8_t pcie_rp_deemphasis_enable[MAX_PCIE_PORTS]; + bool pcie_rp_deemphasis_enable[MAX_PCIE_PORTS]; /* [14:8] DDR mode Number of dealy elements.Each = 125pSec. * [6:0] SDR mode Number of dealy elements.Each = 125pSec. @@ -104,10 +104,10 @@ struct soc_intel_apollolake_config { uint8_t emmc_host_max_speed; /* Sata Ports Hot Plug */ - uint8_t sata_ports_hot_plug[2]; + bool sata_ports_hot_plug[2]; /* Sata Ports Enable */ - uint8_t sata_ports_enable[2]; + bool sata_ports_enable[2]; /* Sata Ports Solid State Drive */ uint8_t sata_ports_ssd[2]; @@ -133,10 +133,10 @@ struct soc_intel_apollolake_config { uint32_t gen4_dec; /* Configure LPSS S0ix Enable */ - uint8_t lpss_s0ix_enable; + bool lpss_s0ix_enable; /* Enable DPTF support */ - int dptf_enable; + bool dptf_enable; /* TCC activation offset value in degrees Celsius */ uint32_t tcc_offset; @@ -144,12 +144,12 @@ struct soc_intel_apollolake_config { /* Configure Audio clk gate and power gate * IOSF-SB port ID 92 offset 0x530 [5] and [3] */ - uint8_t hdaudio_clk_gate_enable; - uint8_t hdaudio_pwr_gate_enable; - uint8_t hdaudio_bios_config_lockdown; + bool hdaudio_clk_gate_enable; + bool hdaudio_pwr_gate_enable; + bool hdaudio_bios_config_lockdown; /* Enhanced C-states */ - int enhanced_cstates; + bool enhanced_cstates; /* SLP S3 minimum assertion width. */ int slp_s3_assertion_width_usecs; @@ -161,7 +161,7 @@ struct soc_intel_apollolake_config { struct usb2_eye_per_port usb2eye[APOLLOLAKE_USB2_PORT_MAX]; /* Override USB port configuration */ - uint8_t usb_config_override; + bool usb_config_override; struct usb_port_config usb2_port[APOLLOLAKE_USB2_PORT_MAX]; struct usb_port_config usb3_port[APOLLOLAKE_USB3_PORT_MAX]; @@ -184,7 +184,7 @@ struct soc_intel_apollolake_config { * disable Compliance Mode. Set TRUE to disable Compliance Mode. * 0:FALSE(Default), 1:True. */ - uint8_t disable_compliance_mode; + bool disable_compliance_mode; /* Options to change USB3 ModPhy setting for the Integrated Filter (IF) * value. Default is 0 to not changing default IF value (0x12). Set @@ -196,7 +196,7 @@ struct soc_intel_apollolake_config { * LDO voltage. Set TRUE to increase LDO voltage with 40mV. * 0:FALSE (default), 1:True. */ - uint8_t mod_phy_voltage_bump; + bool mod_phy_voltage_bump; /* Options to adjust PMIC Vdd2 voltage. Default is 0 to not adjusting * the PMIC Vdd2 default voltage 1.20v. Upd for changing Vdd2 Voltage @@ -210,7 +210,7 @@ struct soc_intel_apollolake_config { * capability in FSP. Setting this option to 1 in devicetree will enable * the Upd parameter VtdEnable. */ - uint8_t enable_vtd; + bool enable_vtd; /* Options to disable the LFPS periodic sampling for USB3 Ports. * Default value of PMCTRL_REG bits[7:4] is 9 which means periodic sampling @@ -218,13 +218,13 @@ struct soc_intel_apollolake_config { * Set 1 to update XHCI host MMIO BAR + PMCTRL_REG (0x80A4 bits[7:4]) to 0 * 0:Enable (default), 1:Disable. */ - uint8_t disable_xhci_lfps_pm; + bool disable_xhci_lfps_pm; /* SATA Aggressive Link Power Management */ - uint8_t disable_sata_salp_support; + bool disable_sata_salp_support; /* Sata Power Optimisation */ - uint8_t sata_pwr_optimize_disable; + bool sata_pwr_optimize_disable; /* SATA speed limit */ enum sata_speed_limit sata_speed; |