diff options
Diffstat (limited to 'src')
114 files changed, 1358 insertions, 3180 deletions
diff --git a/src/arch/i386/include/arch/pci_ops.h b/src/arch/i386/include/arch/pci_ops.h new file mode 100644 index 0000000000..51730c4692 --- /dev/null +++ b/src/arch/i386/include/arch/pci_ops.h @@ -0,0 +1,18 @@ +#ifndef ARCH_I386_PCI_OPS_H +#define ARCH_I386_PCI_OPS_H + +struct pci_ops { + uint8_t (*read8) (uint8_t bus, int devfn, int where); + uint16_t (*read16) (uint8_t bus, int devfn, int where); + uint32_t (*read32) (uint8_t bus, int devfn, int where); + void (*write8) (uint8_t bus, int devfn, int where, uint8_t val); + void (*write16) (uint8_t bus, int devfn, int where, uint16_t val); + void (*write32) (uint8_t bus, int devfn, int where, uint32_t val); +}; +extern const struct pci_ops *conf; + +void pci_set_method_conf1(void); +void pci_set_method_conf2(void); +void pci_set_method(void); + +#endif /* ARCH_I386_PCI_OPS_H */ diff --git a/src/arch/i386/lib/Config.lb b/src/arch/i386/lib/Config.lb index 82adea0e0c..6de19b65be 100644 --- a/src/arch/i386/lib/Config.lb +++ b/src/arch/i386/lib/Config.lb @@ -7,4 +7,7 @@ object c_start.S object cpu.c object pci_ops.c +object pci_ops_conf1.c +object pci_ops_conf2.c +object pci_ops_auto.c object exception.c diff --git a/src/arch/i386/lib/pci_ops.c b/src/arch/i386/lib/pci_ops.c index 9a8616a90a..ded7fd20a4 100644 --- a/src/arch/i386/lib/pci_ops.c +++ b/src/arch/i386/lib/pci_ops.c @@ -5,218 +5,12 @@ #include <device/pci_ids.h> #include <device/pci_ops.h> -static const struct pci_ops *conf; -struct pci_ops { - uint8_t (*read8) (uint8_t bus, int devfn, int where); - uint16_t (*read16) (uint8_t bus, int devfn, int where); - uint32_t (*read32) (uint8_t bus, int devfn, int where); - void (*write8) (uint8_t bus, int devfn, int where, uint8_t val); - void (*write16) (uint8_t bus, int devfn, int where, uint16_t val); - void (*write32) (uint8_t bus, int devfn, int where, uint32_t val); -}; +const struct pci_ops *conf = 0; /* * Direct access to PCI hardware... */ - -/* - * Functions for accessing PCI configuration space with type 1 accesses - */ - -#define CONFIG_CMD(bus,devfn, where) (0x80000000 | (bus << 16) | (devfn << 8) | (where & ~3)) - -static uint8_t pci_conf1_read_config8(unsigned char bus, int devfn, int where) -{ - outl(CONFIG_CMD(bus, devfn, where), 0xCF8); - return inb(0xCFC + (where & 3)); -} - -static uint16_t pci_conf1_read_config16(unsigned char bus, int devfn, int where) -{ - outl(CONFIG_CMD(bus, devfn, where), 0xCF8); - return inw(0xCFC + (where & 2)); -} - -static uint32_t pci_conf1_read_config32(unsigned char bus, int devfn, int where) -{ - outl(CONFIG_CMD(bus, devfn, where), 0xCF8); - return inl(0xCFC); -} - -static void pci_conf1_write_config8(unsigned char bus, int devfn, int where, uint8_t value) -{ - outl(CONFIG_CMD(bus, devfn, where), 0xCF8); - outb(value, 0xCFC + (where & 3)); -} - -static void pci_conf1_write_config16(unsigned char bus, int devfn, int where, uint16_t value) -{ - outl(CONFIG_CMD(bus, devfn, where), 0xCF8); - outw(value, 0xCFC + (where & 2)); -} - -static void pci_conf1_write_config32(unsigned char bus, int devfn, int where, uint32_t value) -{ - outl(CONFIG_CMD(bus, devfn, where), 0xCF8); - outl(value, 0xCFC); -} - -#undef CONFIG_CMD - -static const struct pci_ops pci_direct_conf1 = -{ - .read8 = pci_conf1_read_config8, - .read16 = pci_conf1_read_config16, - .read32 = pci_conf1_read_config32, - .write8 = pci_conf1_write_config8, - .write16 = pci_conf1_write_config16, - .write32 = pci_conf1_write_config32, -}; - -/* - * Functions for accessing PCI configuration space with type 2 accesses - */ - -#define IOADDR(devfn, where) ((0xC000 | ((devfn & 0x78) << 5)) + where) -#define FUNC(devfn) (((devfn & 7) << 1) | 0xf0) -#define SET(bus,devfn) outb(FUNC(devfn), 0xCF8); outb(bus, 0xCFA); - -static uint8_t pci_conf2_read_config8(unsigned char bus, int devfn, int where) -{ - uint8_t value; - SET(bus, devfn); - value = inb(IOADDR(devfn, where)); - outb(0, 0xCF8); - return value; -} - -static uint16_t pci_conf2_read_config16(unsigned char bus, int devfn, int where) -{ - uint16_t value; - SET(bus, devfn); - value = inw(IOADDR(devfn, where)); - outb(0, 0xCF8); - return value; -} - -static uint32_t pci_conf2_read_config32(unsigned char bus, int devfn, int where) -{ - uint32_t value; - SET(bus, devfn); - value = inl(IOADDR(devfn, where)); - outb(0, 0xCF8); - return value; -} - -static void pci_conf2_write_config8(unsigned char bus, int devfn, int where, uint8_t value) -{ - SET(bus, devfn); - outb(value, IOADDR(devfn, where)); - outb(0, 0xCF8); -} - -static void pci_conf2_write_config16(unsigned char bus, int devfn, int where, uint16_t value) -{ - SET(bus, devfn); - outw(value, IOADDR(devfn, where)); - outb(0, 0xCF8); -} - -static void pci_conf2_write_config32(unsigned char bus, int devfn, int where, uint32_t value) -{ - SET(bus, devfn); - outl(value, IOADDR(devfn, where)); - outb(0, 0xCF8); -} - -#undef SET -#undef IOADDR -#undef FUNC - -static const struct pci_ops pci_direct_conf2 = -{ - .read8 = pci_conf2_read_config8, - .read16 = pci_conf2_read_config16, - .read32 = pci_conf2_read_config32, - .write8 = pci_conf2_write_config8, - .write16 = pci_conf2_write_config16, - .write32 = pci_conf2_write_config32, -}; - -/* - * Before we decide to use direct hardware access mechanisms, we try to do some - * trivial checks to ensure it at least _seems_ to be working -- we just test - * whether bus 00 contains a host bridge (this is similar to checking - * techniques used in XFree86, but ours should be more reliable since we - * attempt to make use of direct access hints provided by the PCI BIOS). - * - * This should be close to trivial, but it isn't, because there are buggy - * chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID. - */ -static int pci_sanity_check(const struct pci_ops *o) -{ - uint16_t class, vendor; - uint8_t bus; - int devfn; -#define PCI_CLASS_BRIDGE_HOST 0x0600 -#define PCI_CLASS_DISPLAY_VGA 0x0300 -#define PCI_VENDOR_ID_COMPAQ 0x0e11 -#define PCI_VENDOR_ID_INTEL 0x8086 -#define PCI_VENDOR_ID_MOTOROLA 0x1057 - - for (bus = 0, devfn = 0; devfn < 0x100; devfn++) { - class = o->read16(bus, devfn, PCI_CLASS_DEVICE); - vendor = o->read16(bus, devfn, PCI_VENDOR_ID); - if (((class == PCI_CLASS_BRIDGE_HOST) || (class == PCI_CLASS_DISPLAY_VGA)) || - ((vendor == PCI_VENDOR_ID_INTEL) || (vendor == PCI_VENDOR_ID_COMPAQ) || - (vendor == PCI_VENDOR_ID_MOTOROLA))) { - return 1; - } - } - printk_err("PCI: Sanity check failed\n"); - return 0; -} - -static const struct pci_ops *pci_check_direct(void) -{ - unsigned int tmp; - - /* - * Check if configuration type 1 works. - */ - { - outb(0x01, 0xCFB); - tmp = inl(0xCF8); - outl(0x80000000, 0xCF8); - if (inl(0xCF8) == 0x80000000 && - pci_sanity_check(&pci_direct_conf1)) { - outl(tmp, 0xCF8); - printk_debug("PCI: Using configuration type 1\n"); - return &pci_direct_conf1; - } - outl(tmp, 0xCF8); - } - - /* - * Check if configuration type 2 works. - */ - { - outb(0x00, 0xCFB); - outb(0x00, 0xCF8); - outb(0x00, 0xCFA); - if (inb(0xCF8) == 0x00 && inb(0xCFA) == 0x00 && - pci_sanity_check(&pci_direct_conf2)) { - printk_debug("PCI: Using configuration type 2\n"); - return &pci_direct_conf2; - } - } - - printk_debug("pci_check_direct failed\n"); - - return 0; -} - uint8_t pci_read_config8(device_t dev, unsigned where) { uint8_t value; @@ -264,13 +58,3 @@ void pci_write_config32(device_t dev, unsigned where, uint32_t val) dev->bus->secondary, dev->path.u.pci.devfn, where, val); conf->write32(dev->bus->secondary, dev->path.u.pci.devfn, where, val); } - -/** Set the method to be used for PCI, type I or type II - */ -void pci_set_method(void) -{ - conf = &pci_direct_conf1; - conf = pci_check_direct(); -} - - diff --git a/src/arch/i386/lib/pci_ops_auto.c b/src/arch/i386/lib/pci_ops_auto.c new file mode 100644 index 0000000000..5c45720888 --- /dev/null +++ b/src/arch/i386/lib/pci_ops_auto.c @@ -0,0 +1,92 @@ +#include <console/console.h> +#include <arch/io.h> +#include <arch/pciconf.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> + +/* + * Before we decide to use direct hardware access mechanisms, we try to do some + * trivial checks to ensure it at least _seems_ to be working -- we just test + * whether bus 00 contains a host bridge (this is similar to checking + * techniques used in XFree86, but ours should be more reliable since we + * attempt to make use of direct access hints provided by the PCI BIOS). + * + * This should be close to trivial, but it isn't, because there are buggy + * chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID. + */ +static int pci_sanity_check(const struct pci_ops *o) +{ + uint16_t class, vendor; + uint8_t bus; + int devfn; +#define PCI_CLASS_BRIDGE_HOST 0x0600 +#define PCI_CLASS_DISPLAY_VGA 0x0300 +#define PCI_VENDOR_ID_COMPAQ 0x0e11 +#define PCI_VENDOR_ID_INTEL 0x8086 +#define PCI_VENDOR_ID_MOTOROLA 0x1057 + + for (bus = 0, devfn = 0; devfn < 0x100; devfn++) { + class = o->read16(bus, devfn, PCI_CLASS_DEVICE); + vendor = o->read16(bus, devfn, PCI_VENDOR_ID); + if (((class == PCI_CLASS_BRIDGE_HOST) || (class == PCI_CLASS_DISPLAY_VGA)) || + ((vendor == PCI_VENDOR_ID_INTEL) || (vendor == PCI_VENDOR_ID_COMPAQ) || + (vendor == PCI_VENDOR_ID_MOTOROLA))) { + return 1; + } + } + printk_err("PCI: Sanity check failed\n"); + return 0; +} + +static void pci_check_direct(void) +{ + unsigned int tmp; + + /* + * Check if configuration type 1 works. + */ + { + outb(0x01, 0xCFB); + tmp = inl(0xCF8); + outl(0x80000000, 0xCF8); + if (inl(0xCF8) == 0x80000000) { + pci_set_method_conf1(); + if (pci_sanity_check(conf)) { + outl(tmp, 0xCF8); + printk_debug("PCI: Using configuration type 1\n"); + return; + } + } + outl(tmp, 0xCF8); + } + + /* + * Check if configuration type 2 works. + */ + { + outb(0x00, 0xCFB); + outb(0x00, 0xCF8); + outb(0x00, 0xCFA); + if (inb(0xCF8) == 0x00 && inb(0xCFA) == 0x00) { + pci_set_method_conf2(); + if (pci_sanity_check(conf)) { + printk_debug("PCI: Using configuration type 2\n"); + } + } + } + + printk_debug("pci_check_direct failed\n"); + conf = 0; + + return; +} + +/** Set the method to be used for PCI, type I or type II + */ +void pci_set_method(void) +{ + printk_info("Finding PCI configuration type.\n"); + pci_check_direct(); + post_code(0x5f); +} diff --git a/src/arch/i386/lib/pci_ops_conf1.c b/src/arch/i386/lib/pci_ops_conf1.c new file mode 100644 index 0000000000..1324add74a --- /dev/null +++ b/src/arch/i386/lib/pci_ops_conf1.c @@ -0,0 +1,64 @@ +#include <console/console.h> +#include <arch/io.h> +#include <arch/pciconf.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +/* + * Functions for accessing PCI configuration space with type 1 accesses + */ + +#define CONFIG_CMD(bus,devfn, where) (0x80000000 | (bus << 16) | (devfn << 8) | (where & ~3)) + +static uint8_t pci_conf1_read_config8(unsigned char bus, int devfn, int where) +{ + outl(CONFIG_CMD(bus, devfn, where), 0xCF8); + return inb(0xCFC + (where & 3)); +} + +static uint16_t pci_conf1_read_config16(unsigned char bus, int devfn, int where) +{ + outl(CONFIG_CMD(bus, devfn, where), 0xCF8); + return inw(0xCFC + (where & 2)); +} + +static uint32_t pci_conf1_read_config32(unsigned char bus, int devfn, int where) +{ + outl(CONFIG_CMD(bus, devfn, where), 0xCF8); + return inl(0xCFC); +} + +static void pci_conf1_write_config8(unsigned char bus, int devfn, int where, uint8_t value) +{ + outl(CONFIG_CMD(bus, devfn, where), 0xCF8); + outb(value, 0xCFC + (where & 3)); +} + +static void pci_conf1_write_config16(unsigned char bus, int devfn, int where, uint16_t value) +{ + outl(CONFIG_CMD(bus, devfn, where), 0xCF8); + outw(value, 0xCFC + (where & 2)); +} + +static void pci_conf1_write_config32(unsigned char bus, int devfn, int where, uint32_t value) +{ + outl(CONFIG_CMD(bus, devfn, where), 0xCF8); + outl(value, 0xCFC); +} + +#undef CONFIG_CMD + +static const struct pci_ops pci_direct_conf1 = +{ + .read8 = pci_conf1_read_config8, + .read16 = pci_conf1_read_config16, + .read32 = pci_conf1_read_config32, + .write8 = pci_conf1_write_config8, + .write16 = pci_conf1_write_config16, + .write32 = pci_conf1_write_config32, +}; + +void pci_set_method_conf1(void) +{ + conf = &pci_direct_conf1; +} diff --git a/src/arch/i386/lib/pci_ops_conf2.c b/src/arch/i386/lib/pci_ops_conf2.c new file mode 100644 index 0000000000..9fa03f18a8 --- /dev/null +++ b/src/arch/i386/lib/pci_ops_conf2.c @@ -0,0 +1,80 @@ +#include <console/console.h> +#include <arch/io.h> +#include <arch/pciconf.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +/* + * Functions for accessing PCI configuration space with type 2 accesses + */ + +#define IOADDR(devfn, where) ((0xC000 | ((devfn & 0x78) << 5)) + where) +#define FUNC(devfn) (((devfn & 7) << 1) | 0xf0) +#define SET(bus,devfn) outb(FUNC(devfn), 0xCF8); outb(bus, 0xCFA); + +static uint8_t pci_conf2_read_config8(unsigned char bus, int devfn, int where) +{ + uint8_t value; + SET(bus, devfn); + value = inb(IOADDR(devfn, where)); + outb(0, 0xCF8); + return value; +} + +static uint16_t pci_conf2_read_config16(unsigned char bus, int devfn, int where) +{ + uint16_t value; + SET(bus, devfn); + value = inw(IOADDR(devfn, where)); + outb(0, 0xCF8); + return value; +} + +static uint32_t pci_conf2_read_config32(unsigned char bus, int devfn, int where) +{ + uint32_t value; + SET(bus, devfn); + value = inl(IOADDR(devfn, where)); + outb(0, 0xCF8); + return value; +} + +static void pci_conf2_write_config8(unsigned char bus, int devfn, int where, uint8_t value) +{ + SET(bus, devfn); + outb(value, IOADDR(devfn, where)); + outb(0, 0xCF8); +} + +static void pci_conf2_write_config16(unsigned char bus, int devfn, int where, uint16_t value) +{ + SET(bus, devfn); + outw(value, IOADDR(devfn, where)); + outb(0, 0xCF8); +} + +static void pci_conf2_write_config32(unsigned char bus, int devfn, int where, uint32_t value) +{ + SET(bus, devfn); + outl(value, IOADDR(devfn, where)); + outb(0, 0xCF8); +} + +#undef SET +#undef IOADDR +#undef FUNC + +static const struct pci_ops pci_direct_conf2 = +{ + .read8 = pci_conf2_read_config8, + .read16 = pci_conf2_read_config16, + .read32 = pci_conf2_read_config32, + .write8 = pci_conf2_write_config8, + .write16 = pci_conf2_write_config16, + .write32 = pci_conf2_write_config32, +}; + +void pci_set_method_conf2(void) +{ + conf = &pci_direct_conf2; +} diff --git a/src/arch/ppc/include/arch/pci_ops.h b/src/arch/ppc/include/arch/pci_ops.h new file mode 100644 index 0000000000..6f9c3af3af --- /dev/null +++ b/src/arch/ppc/include/arch/pci_ops.h @@ -0,0 +1,6 @@ +#ifndef ARCH_I386_PCI_OPS_H +#define ARCH_I386_PCI_OPS_H + +void pci_set_method(void); + +#endif /* ARCH_I386_PCI_OPS_H */ diff --git a/src/boot/hardwaremain.c b/src/boot/hardwaremain.c index 8728a9c5a0..50126261d7 100644 --- a/src/boot/hardwaremain.c +++ b/src/boot/hardwaremain.c @@ -69,21 +69,15 @@ void hardwaremain(int boot_complete) /* FIXME: Is there a better way to handle this? */ init_timer(); - /* pick how to scan the bus. This is first so we can get at memory size. */ - printk_info("Finding PCI configuration type.\n"); - pci_set_method(); - post_code(0x5f); + /* Find the devices we don't have hard coded knowledge about. */ dev_enumerate(); post_code(0x66); - /* Now do the real bus. - * We round the total ram up a lot for thing like the SISFB, which - * shares high memory with the CPU. - */ + /* Now compute and assign the bus resources. */ dev_configure(); post_code(0x88); - + /* Now actually enable devices on the bus */ dev_enable(); - + /* And of course initialize devices on the bus */ dev_initialize(); post_code(0x89); diff --git a/src/config/Config.lb b/src/config/Config.lb index c9c03bb604..70fc96de41 100644 --- a/src/config/Config.lb +++ b/src/config/Config.lb @@ -7,7 +7,6 @@ makedefine LIBGCC_FILE_NAME := $(shell $(CC) -print-libgcc-file-name) makedefine GCC_INC_DIR := $(shell $(CC) -print-search-dirs | sed -ne "s/install: \(.*\)/\1include/gp") makedefine CPPFLAGS := -I$(TOP)/src/include -I$(TOP)/src/arch/$(ARCH)/include -I$(GCC_INC_DIR) $(CPUFLAGS) -makedefine ROMCCPPFLAGS := -D__ROMCC__=0 -D__ROMCC_MINOR__=64 makedefine CFLAGS := $(CPU_OPT) $(CPPFLAGS) -Os -nostdinc -nostdlib -fno-builtin -Wall makedefine HOSTCFLAGS:= -Os -Wall diff --git a/src/config/Options.lb b/src/config/Options.lb index eb6736f5de..5e262e32b0 100644 --- a/src/config/Options.lb +++ b/src/config/Options.lb @@ -677,6 +677,12 @@ end # Misc options ############################################### +define CONFIG_CHIP_NAME + default 0 + export always + comment "Compile in the chip name" +end + define CONFIG_GDB_STUB default 0 export used diff --git a/src/cpu/amd/socket_754/socket_754.c b/src/cpu/amd/socket_754/socket_754.c index 6274e6d55a..7c4eaaf07d 100644 --- a/src/cpu/amd/socket_754/socket_754.c +++ b/src/cpu/amd/socket_754/socket_754.c @@ -3,5 +3,5 @@ struct chip_operations cpu_amd_socket_754_ops = { - .name = "socket 754", + CHIP_NAME("socket 754") }; diff --git a/src/cpu/amd/socket_940/socket_940.c b/src/cpu/amd/socket_940/socket_940.c index 46d0cbd449..1a781d61e5 100644 --- a/src/cpu/amd/socket_940/socket_940.c +++ b/src/cpu/amd/socket_940/socket_940.c @@ -3,4 +3,5 @@ struct chip_operations cpu_amd_socket_940_ops = { + CHIP_NAME("socket 940") }; diff --git a/src/cpu/intel/slot_2/slot_2.c b/src/cpu/intel/slot_2/slot_2.c index 5752f3dbb9..cc0fad34bc 100644 --- a/src/cpu/intel/slot_2/slot_2.c +++ b/src/cpu/intel/slot_2/slot_2.c @@ -3,5 +3,5 @@ struct chip_operations cpu_intel_slot_2_control = { - .name = "slot 2", + CHIP_NAME("slot 2") }; diff --git a/src/cpu/intel/socket_mPGA479M/socket_mPGA479M.c b/src/cpu/intel/socket_mPGA479M/socket_mPGA479M.c index 980abe979d..ba22e3bb63 100644 --- a/src/cpu/intel/socket_mPGA479M/socket_mPGA479M.c +++ b/src/cpu/intel/socket_mPGA479M/socket_mPGA479M.c @@ -3,5 +3,5 @@ struct chip_opertations cpu_intel_socket_mPGA479M_control = { - .name = "socket mPGA479M", + CHIP_NAME("socket mPGA479M") }; diff --git a/src/cpu/intel/socket_mPGA603/socket_mPGA603_400Mhz.c b/src/cpu/intel/socket_mPGA603/socket_mPGA603_400Mhz.c index ef43e98877..e589f1ddc5 100644 --- a/src/cpu/intel/socket_mPGA603/socket_mPGA603_400Mhz.c +++ b/src/cpu/intel/socket_mPGA603/socket_mPGA603_400Mhz.c @@ -3,5 +3,5 @@ struct chip_opertations cpu_intel_socket_mPGA603_control = { - .name = "socket mPGA603_400Mhz", + CHIP_NAME("socket mPGA603_400Mhz") }; diff --git a/src/cpu/intel/socket_mPGA604_533Mhz/socket_mPGA604_533Mhz.c b/src/cpu/intel/socket_mPGA604_533Mhz/socket_mPGA604_533Mhz.c index b98a280a2b..aa79a41d1b 100644 --- a/src/cpu/intel/socket_mPGA604_533Mhz/socket_mPGA604_533Mhz.c +++ b/src/cpu/intel/socket_mPGA604_533Mhz/socket_mPGA604_533Mhz.c @@ -3,4 +3,5 @@ struct chip_operations cpu_intel_socket_mPGA604_533Mhz_ops = { + CHIP_NAME("socket mPGA604_533Mhz") }; diff --git a/src/cpu/intel/socket_mPGA604_800Mhz/socket_mPGA604_800Mhz.c b/src/cpu/intel/socket_mPGA604_800Mhz/socket_mPGA604_800Mhz.c index dd3b7e919f..e99e2a1c95 100644 --- a/src/cpu/intel/socket_mPGA604_800Mhz/socket_mPGA604_800Mhz.c +++ b/src/cpu/intel/socket_mPGA604_800Mhz/socket_mPGA604_800Mhz.c @@ -3,5 +3,5 @@ struct chip_operations cpu_intel_socket_mPGA604_800Mhz_control = { - .name = "socket mPGA604_800Mhz", + CHIP_NAME("socket mPGA604_800Mhz") }; diff --git a/src/include/device/device.h b/src/include/device/device.h index cd232c72c1..945cdaabe3 100644 --- a/src/include/device/device.h +++ b/src/include/device/device.h @@ -14,8 +14,17 @@ struct smbus_bus_operations; /* Chip operations */ struct chip_operations { void (*enable_dev)(struct device *dev); +#if CONFIG_CHIP_NAME == 1 + char *name; +#endif }; +#if CONFIG_CHIP_NAME == 1 +#define CHIP_NAME(X) .name = X, +#else +#define CHIP_NAME(X) +#endif + struct device_operations { void (*read_resources)(device_t dev); void (*set_resources)(device_t dev); diff --git a/src/include/device/pci_ops.h b/src/include/device/pci_ops.h index 7f897370ec..49f263fe6c 100644 --- a/src/include/device/pci_ops.h +++ b/src/include/device/pci_ops.h @@ -3,6 +3,7 @@ #include <stdint.h> #include <device/device.h> +#include <arch/pci_ops.h> uint8_t pci_read_config8(device_t dev, unsigned where); uint16_t pci_read_config16(device_t dev, unsigned where); @@ -11,6 +12,4 @@ void pci_write_config8(device_t dev, unsigned where, uint8_t val); void pci_write_config16(device_t dev, unsigned where, uint16_t val); void pci_write_config32(device_t dev, unsigned where, uint32_t val); -void pci_set_method(void); - #endif /* PCI_OPS_H */ diff --git a/src/mainboard/Iwill/DK8S2/Config.lb b/src/mainboard/Iwill/DK8S2/Config.lb index 47400f8559..c28b8d3ca7 100644 --- a/src/mainboard/Iwill/DK8S2/Config.lb +++ b/src/mainboard/Iwill/DK8S2/Config.lb @@ -1,110 +1,3 @@ -uses HAVE_MP_TABLE -uses HAVE_PIRQ_TABLE -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_HARD_RESET -uses HARD_RESET_BUS -uses HARD_RESET_DEVICE -uses HARD_RESET_FUNCTION -uses IRQ_SLOT_COUNT -uses HAVE_OPTION_TABLE -uses CONFIG_MAX_CPUS -uses CONFIG_IOAPIC -uses CONFIG_SMP -uses FALLBACK_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses STACK_SIZE -uses HEAP_SIZE -uses USE_OPTION_TABLE - -## ROM_SIZE is the size of boot ROM that this board will use. -default ROM_SIZE=524288 - -### -### Build options -### - -## -## Build code for the fallback boot -## -default HAVE_FALLBACK_BOOT=1 - -## -## Build code to reset the motherboard from linuxBIOS -## -default HAVE_HARD_RESET=1 - -default HARD_RESET_BUS=1 -default HARD_RESET_DEVICE=4 -default HARD_RESET_FUNCTION=0 - -## -## Build code to export a programmable irq routing table -## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=9 - -## -## Build code to export an x86 MP table -## Useful for specifying IRQ routing values -## -default HAVE_MP_TABLE=1 - -## -## Build code to export a CMOS option table -## -default HAVE_OPTION_TABLE=1 - -## -## Build code for SMP support -## Only worry about 2 micro processors -## -default CONFIG_SMP=1 -default CONFIG_MAX_CPUS=2 - -## -## Build code to setup a generic IOAPIC -## -default CONFIG_IOAPIC=1 - -## -## Clean up the motherboard id strings -## -#default MAINBOARD_PART_NUMBER="HDAMA" -#default MAINBOARD_VENDOR="ARIMA" - -### -### LinuxBIOS layout values -### - -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. -default ROM_IMAGE_SIZE = 65536 - -## -## Use a small 8K stack -## -default STACK_SIZE=0x2000 - -## -## Use a small 16K heap -## -default HEAP_SIZE=0x4000 - -## -## Only use the option table in a normal image -## -default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE - ## ## Compute the location and size of where this firmware image ## (linuxBIOS plus bootloader) will live in the boot rom chip. @@ -123,7 +16,6 @@ end ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) -default CONFIG_ROM_STREAM = 1 ## ## Compute where this copy of linuxBIOS will start in the boot rom @@ -145,15 +37,12 @@ default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) ## arch i386 end -#cpu k8 end ## ## Build the objects we have code for in this directory. ## -#object mainboard.o driver mainboard.o -#object static_devices.o if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end @@ -164,41 +53,41 @@ dir /drivers/ati/ragexl ## Romcc output ## makerule ./failover.E - depends "$(MAINBOARD)/failover.c" - action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E" + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./failover.inc - depends "./failover.E ./romcc" - action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E" + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h" - action "$(CPP) -I$(TOP)/src -I. $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E" + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end makerule ./auto.inc - depends "./auto.E ./romcc" - action "./romcc -mcpu=k8 -O2 ./auto.E > auto.inc" + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end ## ## Build our 16 bit and 32 bit linuxBIOS entry code ## -mainboardinit cpu/i386/entry16.inc -mainboardinit cpu/i386/entry32.inc -ldscript /cpu/i386/entry16.lds -ldscript /cpu/i386/entry32.lds +mainboardinit cpu/x86/16bit/entry16.inc +mainboardinit cpu/x86/32bit/entry32.inc +ldscript /cpu/x86/16bit/entry16.lds +ldscript /cpu/x86/32bit/entry32.lds ## ## Build our reset vector (This is where linuxBIOS is entered) ## if USE_FALLBACK_IMAGE - mainboardinit cpu/i386/reset16.inc - ldscript /cpu/i386/reset16.lds + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds else - mainboardinit cpu/i386/reset32.inc - ldscript /cpu/i386/reset32.lds + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds end ### Should this be in the northbridge code? @@ -210,11 +99,6 @@ mainboardinit arch/i386/lib/cpu_reset.inc mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds -## -## Setup our mtrrs -## -mainboardinit cpu/k8/earlymtrr.inc - ### ### This is the early phase of linuxBIOS startup ### Things are delicate and we test to see if we should @@ -232,9 +116,12 @@ end ## ## Setup RAM ## -mainboardinit cpu/k8/enable_mmx_sse.inc +mainboardinit cpu/x86/fpu/enable_fpu.inc +mainboardinit cpu/x86/mmx/enable_mmx.inc +mainboardinit cpu/x86/sse/enable_sse.inc mainboardinit ./auto.inc -mainboardinit cpu/k8/disable_mmx_sse.inc +mainboardinit cpu/x86/sse/disable_sse.inc +mainboardinit cpu/x86/mmx/disable_mmx.inc ## ## Include the secondary Configuration files @@ -242,6 +129,7 @@ mainboardinit cpu/k8/disable_mmx_sse.inc dir /pc80 config chip.h +# config for arima/hdama chip northbridge/amd/amdk8 device pci_domain 0 on device pci 18.0 on # LDT 0 @@ -330,9 +218,3 @@ chip northbridge/amd/amdk8 end end -## -## Include the old serial code for those few places that still need it. -## -mainboardinit pc80/serial.inc -mainboardinit arch/i386/lib/console.inc - diff --git a/src/mainboard/Iwill/DK8S2/auto.c b/src/mainboard/Iwill/DK8S2/auto.c index 6761646be1..9b40059e43 100644 --- a/src/mainboard/Iwill/DK8S2/auto.c +++ b/src/mainboard/Iwill/DK8S2/auto.c @@ -2,10 +2,10 @@ #include <stdint.h> #include <device/pci_def.h> #include <arch/io.h> -#include <cpu/p6/apic.h> #include <device/pnp_def.h> #include <arch/romcc_io.h> -#include <arch/smp/lapic.h> +#include <cpu/x86/lapic.h> +#include <arch/cpu.h> #include "option_table.h" #include "pc80/mc146818rtc_early.c" #include "pc80/serial.c" @@ -14,19 +14,21 @@ #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" -#include "cpu/k8/apic_timer.c" +#include "cpu/amd/model_fxx/apic_timer.c" #include "lib/delay.c" -#include "cpu/p6/boot_cpu.c" +#include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" #include "northbridge/amd/amdk8/cpu_rev.c" #include "superio/winbond/w83627hf/w83627hf_early_serial.c" +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) static void hard_reset(void) { - set_bios_reset(); + set_bios_reset(); /* enable cf9 */ pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1); @@ -40,6 +42,10 @@ static void soft_reset(void) pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1); } +/* + * GPIO28 of 8111 will control H0_MEMRESET_L + * GPIO29 of 8111 will control H1_MEMRESET_L + */ static void memreset_setup(void) { if (is_cpu_pre_c0()) { @@ -68,7 +74,7 @@ static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes) /* Routing Table Node i * * F0: 0x40, 0x44, 0x48, 0x4c, 0x50, 0x54, 0x58, 0x5c - * i: 0, 1, 2, 3, 4, 5, 6, 7 + * i: 0, 1, 2, 3, 4, 5, 6, 7 * * [ 0: 3] Request Route * [0] Route to this node @@ -124,12 +130,8 @@ static inline int spd_read_byte(unsigned device, unsigned address) #define FIRST_CPU 1 #define SECOND_CPU 1 #define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) -static void main(void) +static void main(unsigned long bist) { - /* - * GPIO28 of 8111 will control H0_MEMRESET_L - * GPIO29 of 8111 will control H1_MEMRESET_L - */ static const struct mem_controller cpu[] = { #if FIRST_CPU { @@ -154,32 +156,39 @@ static void main(void) }, #endif }; + int needs_reset; - - enable_lapic(); - init_timer(); - if (cpu_init_detected()) { - asm("jmp __cpu_reset"); + if (bist == 0) { + /* Skip this if there was a built in self test failure */ + amd_early_mtrr_init(); + enable_lapic(); + init_timer(); + /* Has this cpu already booted? */ + if (cpu_init_detected()) { + asm volatile ("jmp __cpu_reset"); + } + distinguish_cpu_resets(); + if (!boot_cpu()) { + stop_this_cpu(); + } } - - distinguish_cpu_resets(); - if (!boot_cpu()) { - stop_this_cpu(); - } - - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + /* Setup the console */ + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); console_init(); + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + setup_default_resource_map(); needs_reset = setup_coherent_ht_domain(); - needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80); + needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80); if (needs_reset) { print_info("ht reset -\r\n"); soft_reset(); } - + #if 0 print_pci_devices(); #endif diff --git a/src/mainboard/Iwill/DK8S2/chip.h b/src/mainboard/Iwill/DK8S2/chip.h index 0e961fd0e7..402cd5e6d2 100644 --- a/src/mainboard/Iwill/DK8S2/chip.h +++ b/src/mainboard/Iwill/DK8S2/chip.h @@ -1,4 +1,4 @@ -extern struct chip_operations mainboard_Iwill_DK8S2_control; +extern struct chip_operations mainboard_Iwill_DK8S2_ops; struct mainboard_Iwill_DK8S2_config { int nothing; diff --git a/src/mainboard/Iwill/DK8S2/cmos.layout b/src/mainboard/Iwill/DK8S2/cmos.layout index 4a92876b07..f5325d15e8 100644 --- a/src/mainboard/Iwill/DK8S2/cmos.layout +++ b/src/mainboard/Iwill/DK8S2/cmos.layout @@ -73,6 +73,4 @@ enumerations checksums -checksum 392 1007 1008 - - +checksum 392 983 984 diff --git a/src/mainboard/Iwill/DK8S2/mainboard.c b/src/mainboard/Iwill/DK8S2/mainboard.c index 0db6bd043a..465eb3d6d0 100644 --- a/src/mainboard/Iwill/DK8S2/mainboard.c +++ b/src/mainboard/Iwill/DK8S2/mainboard.c @@ -3,14 +3,9 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> - -#include <arch/io.h> -#include "../../../northbridge/amd/amdk8/northbridge.h" #include "chip.h" - -struct chip_operations mainboard_Iwill_DK8S2_control = { - .enumerate = enumerate, - .name = "Iwill DK8S2 mainboard ", +struct chip_operations mainboard_Iwill_DK8S2_ops = { + CHIP_NAME("Iwill DK8S2 mainboard") }; diff --git a/src/mainboard/Iwill/DK8S2/mptable.c b/src/mainboard/Iwill/DK8S2/mptable.c index bd9df2e3ac..34e6037c21 100644 --- a/src/mainboard/Iwill/DK8S2/mptable.c +++ b/src/mainboard/Iwill/DK8S2/mptable.c @@ -4,11 +4,11 @@ #include <string.h> #include <stdint.h> -void *smp_write_config_table(void *v, unsigned long * processor_map) +void *smp_write_config_table(void *v) { static const char sig[4] = "PCMP"; - static const char oem[8] = "LNXI "; - static const char productid[12] = "HDAMA "; + static const char oem[8] = "IWILL "; + static const char productid[12] = "DK8X "; struct mp_config_table *mc; unsigned char bus_num; unsigned char bus_isa; @@ -33,7 +33,7 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) mc->mpe_checksum = 0; mc->reserved = 0; - smp_write_processors(mc, processor_map); + smp_write_processors(mc); { device_t dev; @@ -82,24 +82,25 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) smp_write_bus(mc, bus_isa, "ISA "); /* IOAPIC handling */ - smp_write_ioapic(mc, 2, 0x11, 0xfec00000); { device_t dev; - uint32_t base; + struct resource *res; /* 8131 apic 3 */ dev = dev_find_slot(1, PCI_DEVFN(0x01,1)); if (dev) { - base = pci_read_config32(dev, PCI_BASE_ADDRESS_0); - base &= PCI_BASE_ADDRESS_MEM_MASK; - smp_write_ioapic(mc, 0x03, 0x11, base); + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, 0x03, 0x11, res->base); + } } /* 8131 apic 4 */ dev = dev_find_slot(1, PCI_DEVFN(0x02,1)); if (dev) { - base = pci_read_config32(dev, PCI_BASE_ADDRESS_0); - base &= PCI_BASE_ADDRESS_MEM_MASK; - smp_write_ioapic(mc, 0x04, 0x11, base); + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, 0x04, 0x11, res->base); + } } } @@ -216,17 +217,16 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); - mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); printk_debug("Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } -unsigned long write_smp_table(unsigned long addr, unsigned long *processor_map) +unsigned long write_smp_table(unsigned long addr) { void *v; v = smp_write_floating_table(addr); - return (unsigned long)smp_write_config_table(v, processor_map); + return (unsigned long)smp_write_config_table(v); } diff --git a/src/mainboard/Iwill/DK8X/Config.lb b/src/mainboard/Iwill/DK8X/Config.lb index f95725ecbb..903f5c6c62 100644 --- a/src/mainboard/Iwill/DK8X/Config.lb +++ b/src/mainboard/Iwill/DK8X/Config.lb @@ -1,110 +1,3 @@ -uses HAVE_MP_TABLE -uses HAVE_PIRQ_TABLE -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_HARD_RESET -uses HARD_RESET_BUS -uses HARD_RESET_DEVICE -uses HARD_RESET_FUNCTION -uses IRQ_SLOT_COUNT -uses HAVE_OPTION_TABLE -uses CONFIG_MAX_CPUS -uses CONFIG_IOAPIC -uses CONFIG_SMP -uses FALLBACK_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses STACK_SIZE -uses HEAP_SIZE -uses USE_OPTION_TABLE - -## ROM_SIZE is the size of boot ROM that this board will use. -default ROM_SIZE=524288 - -### -### Build options -### - -## -## Build code for the fallback boot -## -default HAVE_FALLBACK_BOOT=1 - -## -## Build code to reset the motherboard from linuxBIOS -## -default HAVE_HARD_RESET=1 - -default HARD_RESET_BUS=1 -default HARD_RESET_DEVICE=4 -default HARD_RESET_FUNCTION=0 - -## -## Build code to export a programmable irq routing table -## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=9 - -## -## Build code to export an x86 MP table -## Useful for specifying IRQ routing values -## -default HAVE_MP_TABLE=1 - -## -## Build code to export a CMOS option table -## -default HAVE_OPTION_TABLE=1 - -## -## Build code for SMP support -## Only worry about 2 micro processors -## -default CONFIG_SMP=1 -default CONFIG_MAX_CPUS=2 - -## -## Build code to setup a generic IOAPIC -## -default CONFIG_IOAPIC=1 - -## -## Clean up the motherboard id strings -## -#default MAINBOARD_PART_NUMBER="HDAMA" -#default MAINBOARD_VENDOR="ARIMA" - -### -### LinuxBIOS layout values -### - -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. -default ROM_IMAGE_SIZE = 65536 - -## -## Use a small 8K stack -## -default STACK_SIZE=0x2000 - -## -## Use a small 16K heap -## -default HEAP_SIZE=0x4000 - -## -## Only use the option table in a normal image -## -default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE - ## ## Compute the location and size of where this firmware image ## (linuxBIOS plus bootloader) will live in the boot rom chip. @@ -123,7 +16,6 @@ end ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) -default CONFIG_ROM_STREAM = 1 ## ## Compute where this copy of linuxBIOS will start in the boot rom @@ -145,15 +37,12 @@ default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) ## arch i386 end -#cpu k8 end ## ## Build the objects we have code for in this directory. ## -#object mainboard.o driver mainboard.o -#object static_devices.o if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end @@ -161,41 +50,41 @@ if HAVE_PIRQ_TABLE object irq_tables.o end ## Romcc output ## makerule ./failover.E - depends "$(MAINBOARD)/failover.c" - action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E" + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./failover.inc - depends "./failover.E ./romcc" - action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E" + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./auto.E - depends "$(MAINBOARD)/auto.c" - action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E" + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end makerule ./auto.inc - depends "./auto.E ./romcc" - action "./romcc -mcpu=k8 -O2 ./auto.E > auto.inc" + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end ## ## Build our 16 bit and 32 bit linuxBIOS entry code ## -mainboardinit cpu/i386/entry16.inc -mainboardinit cpu/i386/entry32.inc -ldscript /cpu/i386/entry16.lds -ldscript /cpu/i386/entry32.lds +mainboardinit cpu/x86/16bit/entry16.inc +mainboardinit cpu/x86/32bit/entry32.inc +ldscript /cpu/x86/16bit/entry16.lds +ldscript /cpu/x86/32bit/entry32.lds ## ## Build our reset vector (This is where linuxBIOS is entered) ## if USE_FALLBACK_IMAGE - mainboardinit cpu/i386/reset16.inc - ldscript /cpu/i386/reset16.lds + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds else - mainboardinit cpu/i386/reset32.inc - ldscript /cpu/i386/reset32.lds + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds end ### Should this be in the northbridge code? @@ -207,11 +96,6 @@ mainboardinit arch/i386/lib/cpu_reset.inc mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds -## -## Setup our mtrrs -## -mainboardinit cpu/k8/earlymtrr.inc - ### ### This is the early phase of linuxBIOS startup ### Things are delicate and we test to see if we should @@ -229,9 +113,12 @@ end ## ## Setup RAM ## -mainboardinit cpu/k8/enable_mmx_sse.inc +mainboardinit cpu/x86/fpu/enable_fpu.inc +mainboardinit cpu/x86/mmx/enable_mmx.inc +mainboardinit cpu/x86/sse/enable_sse.inc mainboardinit ./auto.inc -mainboardinit cpu/k8/disable_mmx_sse.inc +mainboardinit cpu/x86/sse/disable_sse.inc +mainboardinit cpu/x86/mmx/disable_mmx.inc ## ## Include the secondary Configuration files @@ -306,9 +193,3 @@ chip northbridge/amd/amdk8 end end -## -## Include the old serial code for those few places that still need it. -## -mainboardinit pc80/serial.inc -mainboardinit arch/i386/lib/console.inc - diff --git a/src/mainboard/Iwill/DK8X/auto.c b/src/mainboard/Iwill/DK8X/auto.c index 9889f23229..b8ca3c82ba 100644 --- a/src/mainboard/Iwill/DK8X/auto.c +++ b/src/mainboard/Iwill/DK8X/auto.c @@ -1,25 +1,51 @@ #define ASSEMBLY 1 #include <stdint.h> #include <device/pci_def.h> -#include <cpu/p6/apic.h> #include <arch/io.h> -#include <device/pnp.h> +#include <device/pnp_def.h> #include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include <arch/cpu.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/early_ht.c" +#include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" -#include "cpu/k8/apic_timer.c" +#include "cpu/amd/model_fxx/apic_timer.c" #include "lib/delay.c" -#include "cpu/p6/boot_cpu.c" +#include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" #include "northbridge/amd/amdk8/cpu_rev.c" +#include "superio/NSC/pc87360/pc87360_early_serial.c" +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" -#define SIO_BASE 0x2e +#define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1) +static void hard_reset(void) +{ + set_bios_reset(); + + /* enable cf9 */ + pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1); + /* reset */ + outb(0x0e, 0x0cf9); +} + +static void soft_reset(void) +{ + set_bios_reset(); + pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1); +} + +/* + * GPIO28 of 8111 will control H0_MEMRESET_L + * GPIO29 of 8111 will control H1_MEMRESET_L + */ static void memreset_setup(void) { if (is_cpu_pre_c0()) { @@ -103,68 +129,11 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "sdram/generic_sdram.c" #include "northbridge/amd/amdk8/resourcemap.c" -static void enable_lapic(void) -{ - - msr_t msr; - msr = rdmsr(0x1b); - msr.hi &= 0xffffff00; - msr.lo &= 0x000007ff; - msr.lo |= APIC_DEFAULT_BASE | (1 << 11); - wrmsr(0x1b, msr); -} - -static void stop_this_cpu(void) -{ - unsigned apicid; - apicid = apic_read(APIC_ID) >> 24; - - /* Send an APIC INIT to myself */ - apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid)); - apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT); - /* Wait for the ipi send to finish */ - apic_wait_icr_idle(); - - /* Deassert the APIC INIT */ - apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid)); - apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT); - /* Wait for the ipi send to finish */ - apic_wait_icr_idle(); - - /* If I haven't halted spin forever */ - for(;;) { - hlt(); - } -} - -#define PC87360_FDC 0x00 -#define PC87360_PP 0x01 -#define PC87360_SP2 0x02 -#define PC87360_SP1 0x03 -#define PC87360_SWC 0x04 -#define PC87360_KBCM 0x05 -#define PC87360_KBCK 0x06 -#define PC87360_GPIO 0x07 -#define PC87360_ACB 0x08 -#define PC87360_FSCM 0x09 -#define PC87360_WDT 0x0A - -static void pc87360_enable_serial(void) -{ - pnp_set_logical_device(SIO_BASE, PC87360_SP1); - pnp_set_enable(SIO_BASE, 1); - pnp_set_iobase0(SIO_BASE, 0x3f8); -} - #define FIRST_CPU 1 #define SECOND_CPU 1 #define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) -static void main(void) +static void main(unsigned long bist) { - /* - * GPIO28 of 8111 will control H0_MEMRESET_L - * GPIO29 of 8111 will control H1_MEMRESET_L - */ static const struct mem_controller cpu[] = { #if FIRST_CPU { @@ -189,22 +158,38 @@ static void main(void) }, #endif }; - if (cpu_init_detected()) { - asm("jmp __cpu_reset"); - } - enable_lapic(); - init_timer(); - if (!boot_cpu()) { - stop_this_cpu(); + + int needs_reset; + if (bist == 0) { + /* Skip this if there was a built in self test failure */ + amd_early_mtrr_init(); + enable_lapic(); + init_timer(); + /* Has this cpu already booted? */ + if (cpu_init_detected()) { + asm volatile ("jmp __cpu_reset"); + } + distinguish_cpu_resets(); + if (!boot_cpu()) { + stop_this_cpu(); + } } - pc87360_enable_serial(); + /* Setup the console */ + pc87360_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + setup_default_resource_map(); - setup_coherent_ht_domain(); - enumerate_ht_chain(0); - distinguish_cpu_resets(0); - + needs_reset = setup_coherent_ht_domain(); + needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80); + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } + #if 0 print_pci_devices(); #endif @@ -212,6 +197,7 @@ static void main(void) #if 0 dump_spd_registers(&cpu[0]); #endif + memreset_setup(); sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); diff --git a/src/mainboard/Iwill/DK8X/chip.h b/src/mainboard/Iwill/DK8X/chip.h index c0f74846ef..7710024cca 100644 --- a/src/mainboard/Iwill/DK8X/chip.h +++ b/src/mainboard/Iwill/DK8X/chip.h @@ -1,5 +1,5 @@ -extern struct chip_operations mainboard_arima_hdama_control; +extern struct chip_operations mainboard_Iwill_DK8X_ops; -struct mainboard_arima_hdama_config { +struct mainboard_Iwill_DK8X_config { int nothing; }; diff --git a/src/mainboard/Iwill/DK8X/cmos.layout b/src/mainboard/Iwill/DK8X/cmos.layout index 5ba4c032c1..1ab6187288 100644 --- a/src/mainboard/Iwill/DK8X/cmos.layout +++ b/src/mainboard/Iwill/DK8X/cmos.layout @@ -29,6 +29,9 @@ entries 386 1 e 1 ECC_memory 388 4 r 0 reboot_bits 392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock 400 1 e 1 power_on_after_fail 412 4 e 6 debug_level 416 4 e 7 boot_first @@ -36,7 +39,15 @@ entries 424 4 e 7 boot_third 428 4 h 0 boot_index 432 8 h 0 boot_countdown -1008 16 h 0 check_sum +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 reserved_memory + + enumerations @@ -66,9 +77,19 @@ enumerations 7 9 Fallback_HDD 7 10 Fallback_Floppy #7 3 ROM +8 0 200Mhz +8 1 166Mhz +8 2 133Mhz +8 3 100Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% checksums -checksum 392 1007 1008 - - +checksum 392 983 984 diff --git a/src/mainboard/Iwill/DK8X/mainboard.c b/src/mainboard/Iwill/DK8X/mainboard.c index 845285c881..a1b05d0943 100644 --- a/src/mainboard/Iwill/DK8X/mainboard.c +++ b/src/mainboard/Iwill/DK8X/mainboard.c @@ -3,12 +3,9 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> - -#include <arch/io.h> -#include "../../../northbridge/amd/amdk8/northbridge.h" #include "chip.h" -struct chip_operations mainboard_arima_hdama_control = { - .name = "Arima HDAMA mainboard ", +struct chip_operations mainboard_Iwill_DK8X_ops = { + CHIP_NAME("Iwill DK8X mainboard") }; diff --git a/src/mainboard/Iwill/DK8X/mptable.c b/src/mainboard/Iwill/DK8X/mptable.c index bd9df2e3ac..34e6037c21 100644 --- a/src/mainboard/Iwill/DK8X/mptable.c +++ b/src/mainboard/Iwill/DK8X/mptable.c @@ -4,11 +4,11 @@ #include <string.h> #include <stdint.h> -void *smp_write_config_table(void *v, unsigned long * processor_map) +void *smp_write_config_table(void *v) { static const char sig[4] = "PCMP"; - static const char oem[8] = "LNXI "; - static const char productid[12] = "HDAMA "; + static const char oem[8] = "IWILL "; + static const char productid[12] = "DK8X "; struct mp_config_table *mc; unsigned char bus_num; unsigned char bus_isa; @@ -33,7 +33,7 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) mc->mpe_checksum = 0; mc->reserved = 0; - smp_write_processors(mc, processor_map); + smp_write_processors(mc); { device_t dev; @@ -82,24 +82,25 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) smp_write_bus(mc, bus_isa, "ISA "); /* IOAPIC handling */ - smp_write_ioapic(mc, 2, 0x11, 0xfec00000); { device_t dev; - uint32_t base; + struct resource *res; /* 8131 apic 3 */ dev = dev_find_slot(1, PCI_DEVFN(0x01,1)); if (dev) { - base = pci_read_config32(dev, PCI_BASE_ADDRESS_0); - base &= PCI_BASE_ADDRESS_MEM_MASK; - smp_write_ioapic(mc, 0x03, 0x11, base); + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, 0x03, 0x11, res->base); + } } /* 8131 apic 4 */ dev = dev_find_slot(1, PCI_DEVFN(0x02,1)); if (dev) { - base = pci_read_config32(dev, PCI_BASE_ADDRESS_0); - base &= PCI_BASE_ADDRESS_MEM_MASK; - smp_write_ioapic(mc, 0x04, 0x11, base); + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, 0x04, 0x11, res->base); + } } } @@ -216,17 +217,16 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); - mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); printk_debug("Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } -unsigned long write_smp_table(unsigned long addr, unsigned long *processor_map) +unsigned long write_smp_table(unsigned long addr) { void *v; v = smp_write_floating_table(addr); - return (unsigned long)smp_write_config_table(v, processor_map); + return (unsigned long)smp_write_config_table(v); } diff --git a/src/mainboard/amd/quartet/Config.lb b/src/mainboard/amd/quartet/Config.lb index c9a1d4203e..9b003978b5 100644 --- a/src/mainboard/amd/quartet/Config.lb +++ b/src/mainboard/amd/quartet/Config.lb @@ -46,22 +46,22 @@ if HAVE_PIRQ_TABLE object irq_tables.o end ## Romcc output ## makerule ./failover.E - depends "$(MAINBOARD)/failover.c" - action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E" + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./failover.inc - depends "./failover.E ./romcc" - action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E" + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h" - action "$(CPP) -I$(TOP)/src -I. $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E" + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end makerule ./auto.inc - depends "./auto.E ./romcc" - action "./romcc -mcpu=k8 -O2 ./auto.E > auto.inc" + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end ## diff --git a/src/mainboard/amd/quartet/auto.c b/src/mainboard/amd/quartet/auto.c index 67bc959496..6a3b2194e7 100644 --- a/src/mainboard/amd/quartet/auto.c +++ b/src/mainboard/amd/quartet/auto.c @@ -7,7 +7,8 @@ #include <arch/io.h> #include <device/pnp_def.h> #include <arch/romcc_io.h> -#include <arch/smp/lapic.h> +#include <cpu/x86/lapic.h> +#include <arch/cpu.h> #include "option_table.h" #include "pc80/mc146818rtc_early.c" #include "pc80/serial.c" @@ -16,13 +17,15 @@ #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" -#include "cpu/k8/apic_timer.c" +#include "cpu/amd/model_fxx/apic_timer.c" #include "lib/delay.c" -#include "cpu/p6/boot_cpu.c" +#include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" #include "northbridge/amd/amdk8/cpu_rev.c" #include "superio/NSC/pc87360/pc87360_early_serial.c" +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" #define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1) @@ -41,7 +44,10 @@ static void soft_reset(void) pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1); } - +/* + * GPIO28 of 8111 will control H0_MEMRESET_L + * GPIO29 of 8111 will control H1_MEMRESET_L + */ static void memreset_setup(void) { if (is_cpu_pre_c0()) { @@ -144,13 +150,10 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "fakespd.c" #endif -#include "northbridge/amd/amdk8/setup_resource_map.c" +// #include "northbridge/amd/amdk8/setup_resource_map.c" #include "northbridge/amd/amdk8/raminit.c" - #include "northbridge/amd/amdk8/coherent_ht.c" - #include "sdram/generic_sdram.c" - #include "resourcemap.c" /* quartet does not want the default */ #define RC0 ((1<<1)<<8) @@ -163,7 +166,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #define DIMM2 0x52 #define DIMM3 0x53 -static void main(void) +static void main(unsigned long bist) { static const struct mem_controller cpu[] = { { @@ -215,22 +218,30 @@ static void main(void) int needs_reset; - enable_lapic(); - init_timer(); + if (bist == 0) { + /* Skip this if there was a built in self test failure */ + amd_early_mtrr_init(); + enable_lapic(); + init_timer(); + /* Has this cpu already booted? */ + if (cpu_init_detected()) { + asm volatile ("jmp __cpu_reset"); + } - if (cpu_init_detected()) { - asm("jmp __cpu_reset"); - } - - distinguish_cpu_resets(); + distinguish_cpu_resets(); - if (!boot_cpu()) { - stop_this_cpu(); + if (!boot_cpu()) { + stop_this_cpu(); + } } - + /* Setup the console */ pc87360_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + setup_quartet_resource_map(); needs_reset = setup_coherent_ht_domain(); // needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80); diff --git a/src/mainboard/amd/quartet/chip.h b/src/mainboard/amd/quartet/chip.h index 526dcc4515..59c2edff48 100644 --- a/src/mainboard/amd/quartet/chip.h +++ b/src/mainboard/amd/quartet/chip.h @@ -1,4 +1,4 @@ -extern struct chip_operations mainboard_amd_quartet_control; +extern struct chip_operations mainboard_amd_quartet_ops; struct mainboard_amd_quartet_config { int nothing; diff --git a/src/mainboard/amd/quartet/mainboard.c b/src/mainboard/amd/quartet/mainboard.c index 4071c3b93d..e72ff2c43a 100644 --- a/src/mainboard/amd/quartet/mainboard.c +++ b/src/mainboard/amd/quartet/mainboard.c @@ -3,12 +3,9 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> - -#include <arch/io.h> -#include "../../../northbridge/amd/amdk8/northbridge.h" #include "chip.h" -struct chip_operations mainboard_amd_quartet_control = { - .name = "AMD Quartet mainboard ", +struct chip_operations mainboard_amd_quartet_ops = { + CHIP_NAME("AMD Quartet mainboard ") }; diff --git a/src/mainboard/amd/quartet/mptable.c b/src/mainboard/amd/quartet/mptable.c index 03ff598877..9d3ea13127 100644 --- a/src/mainboard/amd/quartet/mptable.c +++ b/src/mainboard/amd/quartet/mptable.c @@ -4,7 +4,7 @@ #include <string.h> #include <stdint.h> -void *smp_write_config_table(void *v, unsigned long * processor_map) +void *smp_write_config_table(void *v) { static const char sig[4] = "PCMP"; static const char oem[8] = "AMD "; @@ -33,7 +33,7 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) mc->mpe_checksum = 0; mc->reserved = 0; - smp_write_processors(mc, processor_map); + smp_write_processors(mc); { device_t dev; @@ -82,24 +82,25 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) smp_write_bus(mc, bus_isa, "ISA "); /* IOAPIC handling */ - smp_write_ioapic(mc, 2, 0x11, 0xfec00000); { device_t dev; - uint32_t base; + struct resource *res; /* 8131 apic 3 */ dev = dev_find_slot(1, PCI_DEVFN(0x01,1)); if (dev) { - base = pci_read_config32(dev, PCI_BASE_ADDRESS_0); - base &= PCI_BASE_ADDRESS_MEM_MASK; - smp_write_ioapic(mc, 0x03, 0x11, base); + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, 0x03, 0x11, res->base); + } } /* 8131 apic 4 */ dev = dev_find_slot(1, PCI_DEVFN(0x02,1)); if (dev) { - base = pci_read_config32(dev, PCI_BASE_ADDRESS_0); - base &= PCI_BASE_ADDRESS_MEM_MASK; - smp_write_ioapic(mc, 0x04, 0x11, base); + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, 0x04, 0x11, res->base); + } } } @@ -216,17 +217,16 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); - mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); printk_debug("Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } -unsigned long write_smp_table(unsigned long addr, unsigned long *processor_map) +unsigned long write_smp_table(unsigned long addr) { void *v; v = smp_write_floating_table(addr); - return (unsigned long)smp_write_config_table(v, processor_map); + return (unsigned long)smp_write_config_table(v); } diff --git a/src/mainboard/amd/serenade/Config.lb b/src/mainboard/amd/serenade/Config.lb index 79427896c5..4fbf6310b0 100644 --- a/src/mainboard/amd/serenade/Config.lb +++ b/src/mainboard/amd/serenade/Config.lb @@ -46,22 +46,22 @@ if HAVE_PIRQ_TABLE object irq_tables.o end ## Romcc output ## makerule ./failover.E - depends "$(MAINBOARD)/failover.c" - action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E" + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./failover.inc - depends "./failover.E ./romcc" - action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E" + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h" - action "$(CPP) -I$(TOP)/src -I. $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E" + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end makerule ./auto.inc - depends "./auto.E ./romcc" - action "./romcc -mcpu=k8 -O2 ./auto.E > auto.inc" + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end ## @@ -76,11 +76,11 @@ ldscript /cpu/x86/32bit/entry32.lds ## Build our reset vector (This is where linuxBIOS is entered) ## if USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds end ### Should this be in the northbridge code? diff --git a/src/mainboard/amd/serenade/auto.c b/src/mainboard/amd/serenade/auto.c index 85ee737fd1..fb595f7acd 100644 --- a/src/mainboard/amd/serenade/auto.c +++ b/src/mainboard/amd/serenade/auto.c @@ -6,7 +6,8 @@ #include <arch/io.h> #include <device/pnp_def.h> #include <arch/romcc_io.h> -#include <arch/smp/lapic.h> +#include <cpu/x86/lapic.h> +#include <arch/cpu.h> #include "option_table.h" #include "pc80/mc146818rtc_early.c" #include "pc80/serial.c" @@ -15,13 +16,15 @@ #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" -#include "cpu/k8/apic_timer.c" +#include "cpu/amd/model_fxx/apic_timer.c" #include "lib/delay.c" -#include "cpu/p6/boot_cpu.c" +#include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" #include "northbridge/amd/amdk8/cpu_rev.c" #include "superio/winbond/w83627hf/w83627hf_early_serial.c" +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) @@ -41,6 +44,10 @@ static void soft_reset(void) pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1); } +/* + * GPIO16 of 8111 will control H0_MEMRESET_L + * GPIO17 of 8111 will control H1_MEMRESET_L + */ static void memreset_setup(void) { if (is_cpu_pre_c0()) { @@ -126,12 +133,8 @@ static inline int spd_read_byte(unsigned device, unsigned address) #define FIRST_CPU 1 #define SECOND_CPU 1 #define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) -static void main(void) +static void main(unsigned long bist) { - /* - * GPIO28 of 8111 will control H0_MEMRESET_L - * GPIO29 of 8111 will control H1_MEMRESET_L - */ static const struct mem_controller cpu[] = { #if FIRST_CPU { @@ -156,24 +159,31 @@ static void main(void) }, #endif }; - int needs_reset; - - enable_lapic(); - init_timer(); - - if (cpu_init_detected()) { - asm("jmp __cpu_reset"); - } - distinguish_cpu_resets(); - if (!boot_cpu()) { - stop_this_cpu(); + int needs_reset; + if (bist == 0) { + /* Skip this if there was a built in self test failure */ + amd_early_mtrr_init(); + enable_lapic(); + init_timer(); + /* Has this cpu already booted? */ + if (cpu_init_detected()) { + asm volatile ("jmp __cpu_reset"); + } + + distinguish_cpu_resets(); + if (!boot_cpu()) { + stop_this_cpu(); + } } - + /* Setup the console */ w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); console_init(); + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + #if 0 print_pci_devices(); #endif diff --git a/src/mainboard/amd/serenade/chip.h b/src/mainboard/amd/serenade/chip.h index 066852b37a..9f244772d0 100644 --- a/src/mainboard/amd/serenade/chip.h +++ b/src/mainboard/amd/serenade/chip.h @@ -1,4 +1,4 @@ -extern struct chip_operations mainboard_amd_serenade_control; +extern struct chip_operations mainboard_amd_serenade_ops; struct mainboard_amd_serenade_config { int nothing; diff --git a/src/mainboard/amd/serenade/mainboard.c b/src/mainboard/amd/serenade/mainboard.c index 750438ce28..ab3a800b52 100644 --- a/src/mainboard/amd/serenade/mainboard.c +++ b/src/mainboard/amd/serenade/mainboard.c @@ -3,11 +3,8 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> - -#include <arch/io.h> -#include "../../../northbridge/amd/amdk8/northbridge.h" #include "chip.h" -struct chip_operations mainboard_amd_serenade_control = { - .name = "AMD Serenade mainboard ", +struct chip_operations mainboard_amd_serenade_ops = { + CHIP_NAME("AMD Serenade mainboard ") }; diff --git a/src/mainboard/amd/serenade/mptable.c b/src/mainboard/amd/serenade/mptable.c index 6e3b6e2557..b00eb2b082 100644 --- a/src/mainboard/amd/serenade/mptable.c +++ b/src/mainboard/amd/serenade/mptable.c @@ -4,7 +4,7 @@ #include <string.h> #include <stdint.h> -void *smp_write_config_table(void *v, unsigned long * processor_map) +void *smp_write_config_table(void *v) { static const char sig[4] = "PCMP"; static const char oem[8] = "AMD "; @@ -35,7 +35,7 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) mc->mpe_checksum = 0; mc->reserved = 0; - smp_write_processors(mc, processor_map); + smp_write_processors(mc); { device_t dev; @@ -83,20 +83,22 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) smp_write_ioapic(mc, 2, 0x11, 0xfec00000); { device_t dev; - uint32_t base; + struct resource *res; /* 8131-1 apic #3 */ dev = dev_find_slot(1, PCI_DEVFN(0x01,1)); if (dev) { - base = pci_read_config32(dev, PCI_BASE_ADDRESS_0); - base &= PCI_BASE_ADDRESS_MEM_MASK; - smp_write_ioapic(mc, 0x03, 0x11, base); + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, 0x03, 0x11, res->base); + } } /* 8131-2 apic #4 */ dev = dev_find_slot(1, PCI_DEVFN(0x02,1)); if (dev) { - base = pci_read_config32(dev, PCI_BASE_ADDRESS_0); - base &= PCI_BASE_ADDRESS_MEM_MASK; - smp_write_ioapic(mc, 0x04, 0x11, base); + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, 0x04, 0x11, res->base); + } } } @@ -164,10 +166,10 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) return smp_next_mpe_entry(mc); } -unsigned long write_smp_table(unsigned long addr, unsigned long *processor_map) +unsigned long write_smp_table(unsigned long addr) { void *v; v = smp_write_floating_table(addr); - return (unsigned long)smp_write_config_table(v, processor_map); + return (unsigned long)smp_write_config_table(v); } diff --git a/src/mainboard/amd/solo/Config.lb b/src/mainboard/amd/solo/Config.lb index ad8bad9325..7f845725e3 100644 --- a/src/mainboard/amd/solo/Config.lb +++ b/src/mainboard/amd/solo/Config.lb @@ -47,22 +47,22 @@ if HAVE_PIRQ_TABLE object irq_tables.o end ## Romcc output ## makerule ./failover.E - depends "$(MAINBOARD)/failover.c" - action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E" + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./failover.inc - depends "./failover.E ./romcc" - action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E" + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h " - action "$(CPP) -I$(TOP)/src -I. $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E" + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end makerule ./auto.inc - depends "./auto.E ./romcc" - action "./romcc -mcpu=k8 -O2 ./auto.E > auto.inc" + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end ## diff --git a/src/mainboard/amd/solo/mainboard.c b/src/mainboard/amd/solo/mainboard.c index 41ee605695..058a1aff01 100644 --- a/src/mainboard/amd/solo/mainboard.c +++ b/src/mainboard/amd/solo/mainboard.c @@ -4,30 +4,8 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> - -#include <arch/io.h> -#include "../../../northbridge/amd/amdk8/northbridge.h" #include "chip.h" -static void mainboard_init(device_t dev) -{ - root_dev_init(dev); -} - -static struct device_operations mainboard_operations = { - .read_resources = root_dev_read_resources, - .set_resources = root_dev_set_resources, - .enable_resources = root_dev_enable_resources, - .init = mainboard_init, - .scan_bus = root_dev_scan_bus, - .enable = 0, -}; - -static void enable_dev(struct device *dev) -{ - dev->ops = &mainboard_operations; -} - struct chip_operations mainboard_amd_solo_ops = { - .enable_dev = enable_dev, + CHIP_NAME("AMD Solo7 mainboard") }; diff --git a/src/mainboard/arima/hdama/Config.lb b/src/mainboard/arima/hdama/Config.lb index 0799be0117..f812868f4a 100644 --- a/src/mainboard/arima/hdama/Config.lb +++ b/src/mainboard/arima/hdama/Config.lb @@ -32,7 +32,11 @@ default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) default XIP_ROM_SIZE=65536 default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) -arch i386 end +## +## Set all of the defaults for an x86 architecture +## + +arch i386 end ## ## Build the objects we have code for in this directory. @@ -77,11 +81,11 @@ ldscript /cpu/x86/32bit/entry32.lds ## Build our reset vector (This is where linuxBIOS is entered) ## if USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds end ### Should this be in the northbridge code? diff --git a/src/mainboard/arima/hdama/cmos.layout b/src/mainboard/arima/hdama/cmos.layout index ea027282c4..1ab6187288 100644 --- a/src/mainboard/arima/hdama/cmos.layout +++ b/src/mainboard/arima/hdama/cmos.layout @@ -93,5 +93,3 @@ enumerations checksums checksum 392 983 984 - - diff --git a/src/mainboard/arima/hdama/mainboard.c b/src/mainboard/arima/hdama/mainboard.c index 95ed7368f9..69b738e2b4 100644 --- a/src/mainboard/arima/hdama/mainboard.c +++ b/src/mainboard/arima/hdama/mainboard.c @@ -7,315 +7,10 @@ #include <part/hard_reset.h> #include <device/smbus.h> #include <delay.h> - -#include <arch/io.h> -#include "../../../northbridge/amd/amdk8/northbridge.h" -#include "../../../northbridge/amd/amdk8/cpu_rev.c" #include "chip.h" -#include "pc80/mc146818rtc.h" - - -#undef DEBUG -#define DEBUG 0 -#if DEBUG -static void debug_init(device_t dev) -{ - unsigned bus; - unsigned devfn; -#if 0 - for(bus = 0; bus < 256; bus++) { - for(devfn = 0; devfn < 256; devfn++) { - int i; - dev = dev_find_slot(bus, devfn); - if (!dev) { - continue; - } - if (!dev->enabled) { - continue; - } - printk_info("%02x:%02x.%0x aka %s\n", - bus, devfn >> 3, devfn & 7, dev_path(dev)); - for(i = 0; i < 256; i++) { - if ((i & 0x0f) == 0) { - printk_info("%02x:", i); - } - printk_info(" %02x", pci_read_config8(dev, i)); - if ((i & 0x0f) == 0xf) { - printk_info("\n"); - } - } - printk_info("\n"); - } - } -#endif -#if 0 - msr_t msr; - unsigned index; - unsigned eax, ebx, ecx, edx; - index = 0x80000007; - printk_debug("calling cpuid 0x%08x\n", index); - asm volatile( - "cpuid" - : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) - : "a" (index) - ); - printk_debug("cpuid[%08x]: %08x %08x %08x %08x\n", - index, eax, ebx, ecx, edx); - if (edx & (3 << 1)) { - index = 0xC0010042; - printk_debug("Reading msr: 0x%08x\n", index); - msr = rdmsr(index); - printk_debug("msr[0x%08x]: 0x%08x%08x\n", - index, msr.hi, msr.hi); - } -#endif -} - -static void debug_noop(device_t dummy) -{ -} - -static struct device_operations debug_operations = { - .read_resources = debug_noop, - .set_resources = debug_noop, - .enable_resources = debug_noop, - .init = debug_init, -}; - -static unsigned int scan_root_bus(device_t root, unsigned int max) -{ - struct device_path path; - device_t debug; - max = root_dev_scan_bus(root, max); - path.type = DEVICE_PATH_PNP; - path.u.pnp.port = 0; - path.u.pnp.device = 0; - debug = alloc_dev(&root->link[1], &path); - debug->ops = &debug_operations; - return max; -} -#endif - -#if 0 -static void handle_smbus_error(int value, const char *msg) -{ - if (value >= 0) { - return; - } - switch(value) { - case SMBUS_WAIT_UNTIL_READY_TIMEOUT: - printk_emerg("SMBUS wait until ready timed out - resetting..."); - hard_reset(); - break; - case SMBUS_WAIT_UNTIL_DONE_TIMEOUT: - printk_emerg("SMBUS wait until done timed out - resetting..."); - hard_reset(); - break; - default: - die(msg); - break; - } -} - -#define ADM1026_DEVICE 0x2c /* 0x2e or 0x2d */ -#define ADM1026_REG_CONFIG1 0x00 -#define CFG1_MONITOR 0x01 -#define CFG1_INT_ENABLE 0x02 -#define CFG1_INT_CLEAR 0x04 -#define CFG1_AIN8_9 0x08 -#define CFG1_THERM_HOT 0x10 -#define CFT1_DAC_AFC 0x20 -#define CFG1_PWM_AFC 0x40 -#define CFG1_RESET 0x80 -#define ADM1026_REG_CONFIG2 0x01 -#define ADM1026_REG_CONFIG3 0x07 - - - -#define BILLION 1000000000UL - -static void verify_cpu_voltage(const char *name, - device_t dev, unsigned int reg, - unsigned factor, unsigned cpu_volts, unsigned delta) -{ - unsigned nvolts_lo, nvolts_hi; - unsigned cpuvolts_hi, cpuvolts_lo; - int value; - int loops; - - loops = 1000; - do { - value = smbus_read_byte(dev, reg); - handle_smbus_error(value, "SMBUS read byte failed"); - } while ((--loops > 0) && value == 0); - /* Convert the byte value to nanoVolts. - * My accuracy is nowhere near that good but I don't - * have to round so the math is simple. - * I can only go up to about 4.2 Volts this way so my range is - * limited. - */ - nvolts_lo = ((unsigned)value * factor); - nvolts_hi = nvolts_lo + factor - 1; - /* Get the range of acceptable cpu voltage values */ - cpuvolts_lo = cpu_volts - delta; - cpuvolts_hi = cpu_volts + delta; - if ((nvolts_lo < cpuvolts_lo) || (nvolts_hi > cpuvolts_hi)) { - printk_emerg("%s at (%u.%09u-%u.%09u)Volts expected %u.%09u+/-%u.%09uVolts\n", - name, - nvolts_lo/BILLION, nvolts_lo%BILLION, - nvolts_hi/BILLION, nvolts_hi%BILLION, - cpu_volts/BILLION, cpu_volts%BILLION, - delta/BILLION, delta%BILLION); - die(""); - } - printk_info("%s at (%u.%09u-%u.%09u)Volts\n", - name, - nvolts_lo/BILLION, nvolts_lo%BILLION, - nvolts_hi/BILLION, nvolts_hi%BILLION); - -} - -static void adm1026_enable_monitoring(device_t dev) -{ - int result; - result = smbus_read_byte(dev, ADM1026_REG_CONFIG1); - handle_smbus_error(result, "ADM1026: cannot read config1"); - - result = (result | CFG1_MONITOR) & ~(CFG1_INT_CLEAR | CFG1_RESET); - result = smbus_write_byte(dev, ADM1026_REG_CONFIG1, result); - handle_smbus_error(result, "ADM1026: cannot write to config1"); - - result = smbus_read_byte(dev, ADM1026_REG_CONFIG1); - handle_smbus_error(result, "ADM1026: cannot reread config1"); - if (!(result & CFG1_MONITOR)) { - die("ADM1026: monitoring would not enable"); - } -} - - -static unsigned k8_cpu_volts(void) -{ - unsigned volts = ~0; - if (is_cpu_c0()) { - volts = 1500000000; - } - if (is_cpu_b3()) { - volts = 1550000000; - } - return volts; -} - -static void verify_cpu_voltages(device_t dev) -{ - unsigned cpu_volts; - unsigned delta; -#if 0 - delta = 50000000; -#else - delta = 75000000; -#endif - cpu_volts = k8_cpu_volts(); - if (cpu_volts == ~0) { - printk_info("Required cpu voltage unknwon not checking\n"); - return; - } - /* I need to read registers 0x37 == Ain7CPU1 core 0x2d == VcppCPU0 core */ - /* CPU1 core - * The sensor has a range of 0-2.5V and reports in - * 256 distinct steps. - */ - verify_cpu_voltage("CPU1 Vcore", dev, 0x37, 9765625, - cpu_volts, delta); - /* CPU0 core - * The sensor has range of 0-3.0V and reports in - * 256 distinct steps. - */ - verify_cpu_voltage("CPU0 Vcore", dev, 0x2d, 11718750, - cpu_volts, delta); -} - -#define SMBUS_MUX 0x70 - -static void do_verify_cpu_voltages(void) -{ - device_t smbus_dev; - device_t mux, sensor; - struct device_path mux_path, sensor_path; - int result; - int mux_setting; - - /* Find the smbus controller */ - smbus_dev = dev_find_device(0x1022, 0x746b, 0); - if (!smbus_dev) { - die("SMBUS controller not found\n"); - } - - /* Find the smbus mux */ - mux_path.type = DEVICE_PATH_I2C; - mux_path.u.i2c.device = SMBUS_MUX; - mux = find_dev_path(smbus_dev, &mux_path); - if (!mux) { - die("SMBUS mux not found\n"); - } - - /* Find the adm1026 sensor */ - sensor_path.type = DEVICE_PATH_I2C; - sensor_path.u.i2c.device = ADM1026_DEVICE; - sensor = find_dev_path(mux, &sensor_path); - if (!sensor) { - die("ADM1026 not found\n"); - } - - /* Set the mux to see the temperature sensors */ - mux_setting = 1; - result = smbus_send_byte(mux, mux_setting); - handle_smbus_error(result, "SMBUS send byte failed\n"); - - result = smbus_recv_byte(mux); - handle_smbus_error(result, "SMBUS recv byte failed\n"); - if (result != mux_setting) { - printk_emerg("SMBUS mux would not set to %d\n", mux_setting); - die(""); - } - - adm1026_enable_monitoring(sensor); - - /* It takes 11.38ms to read a new voltage sensor value */ - mdelay(12); - - /* Read the cpu voltages and make certain everything looks sane */ - verify_cpu_voltages(sensor); -} -#else -#define do_verify_cpu_voltages() do {} while(0) -#endif - -static void mainboard_init(device_t dev) -{ - root_dev_init(dev); - - do_verify_cpu_voltages(); -} - -static struct device_operations mainboard_operations = { - .read_resources = root_dev_read_resources, - .set_resources = root_dev_set_resources, - .enable_resources = root_dev_enable_resources, - .init = mainboard_init, -#if !DEBUG - .scan_bus = root_dev_scan_bus, -#else - .scan_bus = scan_root_bus, -#endif - .enable = 0, -}; -static void enable_dev(struct device *dev) -{ - dev->ops = &mainboard_operations; -} struct chip_operations mainboard_arima_hdama_ops = { - .enable_dev = enable_dev, + CHIP_NAME("Arima Hdama mainboard") }; diff --git a/src/mainboard/densitron/dpx114/Config.lb b/src/mainboard/densitron/dpx114/Config.lb index 0450b2b1b9..05698b117d 100644 --- a/src/mainboard/densitron/dpx114/Config.lb +++ b/src/mainboard/densitron/dpx114/Config.lb @@ -1,86 +1,3 @@ -uses HAVE_MP_TABLE -uses HAVE_PIRQ_TABLE -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_HARD_RESET -uses HAVE_OPTION_TABLE -uses USE_OPTION_TABLE -uses CONFIG_ROM_STREAM -uses IRQ_SLOT_COUNT -uses MAINBOARD -uses ARCH -uses FALLBACK_SIZE -uses STACK_SIZE -uses HEAP_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM_START -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses HAVE_MP_TABLE - -## ROM_SIZE is the size of boot ROM that this board will use. -default ROM_SIZE = 256*1024 - -### -### Build options -### - -## -## Build code for the fallback boot -## -default HAVE_FALLBACK_BOOT=1 - -## -## no MP table -## -default HAVE_MP_TABLE=0 - -## -## Build code to reset the motherboard from linuxBIOS -## -default HAVE_HARD_RESET=1 - -## -## Build code to export a programmable irq routing table -## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=5 -object irq_tables.o - -## -## Build code to export a CMOS option table -## -default HAVE_OPTION_TABLE=1 - -### -### LinuxBIOS layout values -### - -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. -default ROM_IMAGE_SIZE = 65536 - -## -## Use a small 8K stack -## -default STACK_SIZE=0x2000 - -## -## Use a small 16K heap -## -default HEAP_SIZE=0x4000 - -## -## Only use the option table in a normal image -## -#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE -default USE_OPTION_TABLE = 0 - ## ## Compute the location and size of where this firmware image ## (linuxBIOS plus bootloader) will live in the boot rom chip. @@ -99,7 +16,6 @@ end ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) -default CONFIG_ROM_STREAM = 1 ## ## Compute where this copy of linuxBIOS will start in the boot rom @@ -126,49 +42,49 @@ arch i386 end ## Build the objects we have code for in this directory. ## - driver mainboard.o +if HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o ## ## Romcc output ## makerule ./failover.E - depends "$(MAINBOARD)/failover.c" - action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E" + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./failover.inc - depends "./failover.E ./romcc" - action "./romcc -O -mcpu=c3 -o failover.inc --label-prefix=failover ./failover.E" + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./auto.E - depends "$(MAINBOARD)/auto.c" - action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E" + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -E -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end makerule ./auto.inc - depends "./auto.E ./romcc" - action "./romcc -O -mcpu=c3 ./auto.E " + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end ## ## Build our 16 bit and 32 bit linuxBIOS entry code ## -mainboardinit cpu/i386/entry16.inc -mainboardinit cpu/i386/entry32.inc -ldscript /cpu/i386/entry16.lds -ldscript /cpu/i386/entry32.lds +mainboardinit cpu/x86/16bit/entry16.inc +mainboardinit cpu/x86/32bit/entry32.inc +ldscript /cpu/x86/16bit/entry16.lds +ldscript /cpu/x86/32bit/entry32.lds ## ## Build our reset vector (This is where linuxBIOS is entered) ## if USE_FALLBACK_IMAGE - mainboardinit cpu/i386/reset16.inc - ldscript /cpu/i386/reset16.lds + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds else - mainboardinit cpu/i386/reset32.inc - ldscript /cpu/i386/reset32.lds + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds end ### Should this be in the northbridge code? @@ -180,11 +96,6 @@ mainboardinit arch/i386/lib/cpu_reset.inc mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds -## -## Setup our mtrrs -## -# mainboardinit cpu/p6/earlymtrr.inc - ### ### This is the early phase of linuxBIOS startup ### Things are delicate and we test to see if we should @@ -202,7 +113,10 @@ end ## ## Setup RAM ## +mainboardinit cpu/x86/fpu/enable_fpu.inc +mainboardinit cpu/x86/mmx/enable_mmx.inc mainboardinit ./auto.inc +mainboardinit cpu/x86/mmx/disable_mmx.inc ## ## Include the secondary Configuration files @@ -210,32 +124,24 @@ mainboardinit ./auto.inc dir /pc80 config chip.h -northbridge via/vt8601 "vt8601" -# pci 0:0.0 -# pci 0:1.0 - southbridge via/vt8231 "vt8231" -# pci 0:11.0 -# pci 0:11.1 -# pci 0:11.2 -# pci 0:11.3 -# pci 0:11.4 -# pci 0:11.5 -# pci 0:11.6 -# pci 0:12.0 - register "enable_usb" = "0" - register "enable_native_ide" = "0" - register "enable_com_ports" = "1" - register "enable_keyboard" = "0" - register "enable_nvram" = "1" +chip northbridge/via/vt8601 + device pci_domain 0 on + chip southbridge/via/vt8231 + register "enable_usb" = "0" + register "enable_native_ide" = "0" + register "enable_com_ports" = "1" + register "enable_keyboard" = "0" + register "enable_nvram" = "1" +# device pci 0:11.0 on end +# device pci 0:11.1 on end +# device pci 0:11.2 on end +# device pci 0:11.3 on end +# device pci 0:11.4 on end +# device pci 0:11.5 on end +# device pci 0:11.6 on end +# device pci 0:12.0 on end + end + end + chip cpu/via/model_centaur end end - -cpu p6 "cpu0" - -end - -## -## Include the old serial code for those few places that still need it. -## -mainboardinit pc80/serial.inc -mainboardinit arch/i386/lib/console.inc diff --git a/src/mainboard/densitron/dpx114/auto.c b/src/mainboard/densitron/dpx114/auto.c index 7b1c637cd0..a1b3818b93 100644 --- a/src/mainboard/densitron/dpx114/auto.c +++ b/src/mainboard/densitron/dpx114/auto.c @@ -2,7 +2,9 @@ #include <stdint.h> #include <device/pci_def.h> -#include <cpu/p6/apic.h> +#if 0 +#include <cpu/x86/lapic.h> +#endif #include <arch/io.h> #include <device/pnp_def.h> #include <arch/romcc_io.h> @@ -11,7 +13,8 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" #include "northbridge/via/vt8601/raminit.h" -#include "cpu/p6/earlymtrr.c" +#include "cpu/x86/mtrr/earlymtrr.c" +#include "cpu/x86/bist.h" /* */ @@ -23,10 +26,22 @@ void udelay(int usecs) } #include "lib/delay.c" -#include "cpu/p6/boot_cpu.c" +#include "cpu/x86/lapic/boot_cpu.c" #include "debug.c" +#include "southbridge/via/vt8231/vt8231_early_smbus.c" + + #include "southbridge/via/vt8231/vt8231_early_serial.c" +static inline int spd_read_byte(unsigned device, unsigned address) +{ + unsigned char c; + c = smbus_read_byte(device, address); + return c; +} + +#include "northbridge/via/vt8601/raminit.c" + static void enable_mainboard_devices(void) { @@ -68,16 +83,22 @@ static void enable_shadow_ram(void) pci_write_config8(dev, 0x63, shadowreg); } -static void main(void) +static void main(unsigned long bist) { unsigned long x; - /* init_timer();*/ - outb(5, 0x80); - - enable_vt8231_serial(); + if (bist == 0) { + early_mtrr_init(); + } + enable_vt8231_serial(); uart_init(); console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + /* init_timer();*/ + outb(5, 0x80); enable_mainboard_devices(); enable_smbus(); @@ -102,5 +123,4 @@ static void main(void) ram_check(check_addrs[i].lo, check_addrs[i].hi); } #endif - early_mtrr_init(); } diff --git a/src/mainboard/densitron/dpx114/chip.h b/src/mainboard/densitron/dpx114/chip.h index 8f7eae8bee..10beb176b0 100644 --- a/src/mainboard/densitron/dpx114/chip.h +++ b/src/mainboard/densitron/dpx114/chip.h @@ -1,4 +1,4 @@ -extern struct chip_operations mainboard_densitron_dpx114_control; +extern struct chip_operations mainboard_densitron_dpx114_ops; struct mainboard_densitron_dpx114_config { int nothing; diff --git a/src/mainboard/densitron/dpx114/failover.c b/src/mainboard/densitron/dpx114/failover.c index bd0df4e89d..bdcb9eaed2 100644 --- a/src/mainboard/densitron/dpx114/failover.c +++ b/src/mainboard/densitron/dpx114/failover.c @@ -5,25 +5,28 @@ #include <arch/io.h> #include "arch/romcc_io.h" #include "pc80/mc146818rtc_early.c" -#include "cpu/p6/boot_cpu.c" -static void main(void) +static unsigned long main(unsigned long bist) { - /* for now, just always assume failure */ - -#if 0 - /* Is this a cpu reset? */ - if (cpu_init_detected()) { - if (last_boot_normal()) { - asm("jmp __normal_image"); - } else { - asm("jmp __cpu_reset"); - } - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - asm("jmp __normal_image"); + if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; } -#endif + normal_image: + asm volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + : /* clobbers */ + ); + cpu_reset: + asm volatile ("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + : /* clobbers */ + ); + fallback_image: + return bist; } diff --git a/src/mainboard/densitron/dpx114/mainboard.c b/src/mainboard/densitron/dpx114/mainboard.c index 188da9216e..f973012ca0 100644 --- a/src/mainboard/densitron/dpx114/mainboard.c +++ b/src/mainboard/densitron/dpx114/mainboard.c @@ -3,35 +3,9 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> - -#include <arch/io.h> #include "chip.h" -static int -mainboard_scan_bus(device_t root, int maxbus) -{ - int retval; - printk_spew("%s: root %p maxbus %d\n", __FUNCTION__, root, maxbus); - retval = pci_scan_bus(root->bus, 0, 0xff, maxbus); - printk_spew("DONE %s: return %d\n", __FUNCTION__, maxbus); - return maxbus; -} - -static struct device_operations mainboard_operations = { - .read_resources = root_dev_read_resources, - .set_resources = root_dev_set_resources, - .enable_resources = root_dev_enable_resources, - .init = root_dev_init, - .scan_bus = mainboard_scan_bus, - .enable = 0, -}; - -static void enable_dev(device_t dev) -{ - dev->ops = &mainboard_operations; -} -struct chip_operations mainboard_via_epia_control = { - .enable_dev = enable_dev, - .name = "VIA EPIA mainboard ", +struct chip_operations mainboard_densitron_dpx114_ops = { + CHIP_NAME("Densitron DPX114 mainboard ") }; diff --git a/src/mainboard/digitallogic/adl855pc/Config.lb b/src/mainboard/digitallogic/adl855pc/Config.lb index 9871632bfb..2564eeff2b 100644 --- a/src/mainboard/digitallogic/adl855pc/Config.lb +++ b/src/mainboard/digitallogic/adl855pc/Config.lb @@ -1,86 +1,3 @@ -uses HAVE_MP_TABLE -uses HAVE_PIRQ_TABLE -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_HARD_RESET -uses HAVE_OPTION_TABLE -uses USE_OPTION_TABLE -uses CONFIG_ROM_STREAM -uses IRQ_SLOT_COUNT -uses MAINBOARD -uses ARCH -uses FALLBACK_SIZE -uses STACK_SIZE -uses HEAP_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM_START -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses HAVE_MP_TABLE - -## ROM_SIZE is the size of boot ROM that this board will use. -default ROM_SIZE = 256*1024 - -### -### Build options -### - -## -## Build code for the fallback boot -## -default HAVE_FALLBACK_BOOT=1 - -## -## no MP table -## -default HAVE_MP_TABLE=0 - -## -## Build code to reset the motherboard from linuxBIOS -## -default HAVE_HARD_RESET=1 - -## -## Build code to export a programmable irq routing table -## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=5 -object irq_tables.o - -## -## Build code to export a CMOS option table -## -default HAVE_OPTION_TABLE=1 - -### -### LinuxBIOS layout values -### - -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. -default ROM_IMAGE_SIZE = 65536 - -## -## Use a small 8K stack -## -default STACK_SIZE=0x2000 - -## -## Use a small 16K heap -## -default HEAP_SIZE=0x4000 - -## -## Only use the option table in a normal image -## -#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE -default USE_OPTION_TABLE = 0 - ## ## Compute the location and size of where this firmware image ## (linuxBIOS plus bootloader) will live in the boot rom chip. @@ -99,7 +16,6 @@ end ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) -default CONFIG_ROM_STREAM = 1 ## ## Compute where this copy of linuxBIOS will start in the boot rom @@ -126,49 +42,49 @@ arch i386 end ## Build the objects we have code for in this directory. ## - driver mainboard.o +if HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o ## ## Romcc output ## makerule ./failover.E - depends "$(MAINBOARD)/failover.c" - action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E" + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./failover.inc - depends "./failover.E ./romcc" - action "./romcc -O -mcpu=p4 -o failover.inc --label-prefix=failover ./failover.E" + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./auto.E - depends "$(MAINBOARD)/auto.c" - action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E" + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -E -mcpu=p3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end makerule ./auto.inc - depends "./auto.E ./romcc" - action "./romcc -O -mcpu=p4 ./auto.E " + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -mcpu=p3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end ## ## Build our 16 bit and 32 bit linuxBIOS entry code ## -mainboardinit cpu/i386/entry16.inc -mainboardinit cpu/i386/entry32.inc -ldscript /cpu/i386/entry16.lds -ldscript /cpu/i386/entry32.lds +mainboardinit cpu/x86/16bit/entry16.inc +mainboardinit cpu/x86/32bit/entry32.inc +ldscript /cpu/x86/16bit/entry16.lds +ldscript /cpu/x86/32bit/entry32.lds ## ## Build our reset vector (This is where linuxBIOS is entered) ## if USE_FALLBACK_IMAGE - mainboardinit cpu/i386/reset16.inc - ldscript /cpu/i386/reset16.lds + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds else - mainboardinit cpu/i386/reset32.inc - ldscript /cpu/i386/reset32.lds + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds end ### Should this be in the northbridge code? @@ -180,11 +96,6 @@ mainboardinit arch/i386/lib/cpu_reset.inc mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds -## -## Setup our mtrrs -## -# mainboardinit cpu/p6/earlymtrr.inc - ### ### This is the early phase of linuxBIOS startup ### Things are delicate and we test to see if we should @@ -203,7 +114,7 @@ end ## Setup RAM ## mainboardinit cpu/x86/fpu/enable_fpu.inc -mainboardinit cpu/x86/mmx/emable_mmx.inc +mainboardinit cpu/x86/mmx/enable_mmx.inc mainboardinit cpu/x86/sse/enable_sse.inc mainboardinit ./auto.inc mainboardinit cpu/x86/sse/disable_sse.inc @@ -273,8 +184,8 @@ chip northbridge/intel/i855pm end end device apic_cluster 0 on - device cpu/intel/socket_mPGA479M - apic 0 + chip cpu/intel/socket_mPGA479M + device apic 0 on end end end end diff --git a/src/mainboard/digitallogic/adl855pc/auto.c b/src/mainboard/digitallogic/adl855pc/auto.c index f2e183615b..1af77f4504 100644 --- a/src/mainboard/digitallogic/adl855pc/auto.c +++ b/src/mainboard/digitallogic/adl855pc/auto.c @@ -5,7 +5,10 @@ #include <arch/io.h> #include <device/pnp_def.h> #include <arch/romcc_io.h> +#if 0 #include <arch/smp/lapic.h> +#endif +#include <arch/hlt.h> //#include "option_table.h" #include "pc80/mc146818rtc_early.c" #include "pc80/serial.c" @@ -14,16 +17,16 @@ #include "southbridge/intel/i82801dbm/i82801dbm_early_smbus.c" #include "northbridge/intel/i855pm/raminit.h" -#if 1 +#if 0 #include "cpu/p6/apic_timer.c" #include "lib/delay.c" #endif -#include "cpu/p6/boot_cpu.c" +#include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/intel/i855pm/debug.c" #include "superio/winbond/w83627hf/w83627hf_early_serial.c" - -#include "cpu/p6/earlymtrr.c" +#include "cpu/x86/mtrr/earlymtrr.c" +#include "cpu/x86/bist.h" #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) @@ -57,7 +60,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "northbridge/intel/i855pm/reset_test.c" #include "sdram/generic_sdram.c" -static void main(void) +static void main(unsigned long bist) { static const struct mem_controller memctrl[] = { { @@ -66,15 +69,21 @@ static void main(void) }, }; -#if 1 - enable_lapic(); - init_timer(); + if (bist == 0) { + early_mtrr_init(); +#if 0 + enable_lapic(); + init_timer(); #endif + } w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); console_init(); + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + #if 0 print_pci_devices(); #endif diff --git a/src/mainboard/digitallogic/adl855pc/chip.h b/src/mainboard/digitallogic/adl855pc/chip.h index e660951a9b..0ed8089561 100644 --- a/src/mainboard/digitallogic/adl855pc/chip.h +++ b/src/mainboard/digitallogic/adl855pc/chip.h @@ -1,4 +1,4 @@ -extern struct chip_operations mainboard_digitallogic_adl855pc_control; +extern struct chip_operations mainboard_digitallogic_adl855pc_ops; struct mainboard_digitallogic_adl855pc_config { int nothing; diff --git a/src/mainboard/digitallogic/adl855pc/failover.c b/src/mainboard/digitallogic/adl855pc/failover.c index bd0df4e89d..bdcb9eaed2 100644 --- a/src/mainboard/digitallogic/adl855pc/failover.c +++ b/src/mainboard/digitallogic/adl855pc/failover.c @@ -5,25 +5,28 @@ #include <arch/io.h> #include "arch/romcc_io.h" #include "pc80/mc146818rtc_early.c" -#include "cpu/p6/boot_cpu.c" -static void main(void) +static unsigned long main(unsigned long bist) { - /* for now, just always assume failure */ - -#if 0 - /* Is this a cpu reset? */ - if (cpu_init_detected()) { - if (last_boot_normal()) { - asm("jmp __normal_image"); - } else { - asm("jmp __cpu_reset"); - } - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - asm("jmp __normal_image"); + if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; } -#endif + normal_image: + asm volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + : /* clobbers */ + ); + cpu_reset: + asm volatile ("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + : /* clobbers */ + ); + fallback_image: + return bist; } diff --git a/src/mainboard/digitallogic/adl855pc/mainboard.c b/src/mainboard/digitallogic/adl855pc/mainboard.c index 1ef4af1d38..a818240be1 100644 --- a/src/mainboard/digitallogic/adl855pc/mainboard.c +++ b/src/mainboard/digitallogic/adl855pc/mainboard.c @@ -3,35 +3,9 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> - -#include <arch/io.h> #include "chip.h" -static int -mainboard_scan_bus(device_t root, int maxbus) -{ - int retval; - printk_spew("%s: root %p maxbus %d\n", __FUNCTION__, root, maxbus); - retval = pci_scan_bus(root->bus, 0, 0xff, maxbus); - printk_spew("DONE %s: return %d\n", __FUNCTION__, maxbus); - return maxbus; -} - -static struct device_operations mainboard_operations = { - .read_resources = root_dev_read_resources, - .set_resources = root_dev_set_resources, - .enable_resources = root_dev_enable_resources, - .init = root_dev_init, - .scan_bus = mainboard_scan_bus, - .enable = 0, -}; - -static void enable_dev(device_t dev) -{ - dev->ops = &mainboard_operations; -} -struct chip_operations mainboard_digitallogic_adl855pc_control = { - .enable_dev = enable_dev, - .name = "Digital Logic ADL855PC mainboard ", +struct chip_operations mainboard_digitallogic_adl855pc_ops = { + CHIP_NAME("Digital Logic ADL855PC mainboard ") }; diff --git a/src/mainboard/emulation/qemu-i386/auto.c b/src/mainboard/emulation/qemu-i386/auto.c index a4259df0fe..d2fa623d68 100644 --- a/src/mainboard/emulation/qemu-i386/auto.c +++ b/src/mainboard/emulation/qemu-i386/auto.c @@ -7,6 +7,8 @@ #include <device/pnp_def.h> #include <arch/romcc_io.h> #include <arch/hlt.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" #include "pc80/serial.c" #include "arch/i386/lib/console.c" diff --git a/src/mainboard/emulation/qemu-i386/mainboard.c b/src/mainboard/emulation/qemu-i386/mainboard.c index 173f8aa2ab..83ea657a78 100644 --- a/src/mainboard/emulation/qemu-i386/mainboard.c +++ b/src/mainboard/emulation/qemu-i386/mainboard.c @@ -3,34 +3,9 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> - -#include <arch/io.h> #include "chip.h" -static int mainboard_scan_bus(device_t root, int maxbus) -{ - int retval; - printk_spew("%s: root %p maxbus %d\n", __FUNCTION__, root, maxbus); - retval = pci_scan_bus(root->bus, 0, 0xff, maxbus); - printk_spew("DONE %s: return %d\n", __FUNCTION__, maxbus); - return maxbus; -} - -static struct device_operations mainboard_operations = { - .read_resources = root_dev_read_resources, - .set_resources = root_dev_set_resources, - .enable_resources = root_dev_enable_resources, - .init = root_dev_init, - .scan_bus = mainboard_scan_bus, -}; - -static void enable_dev(struct device *dev) -{ - dev->ops = &mainboard_operations; -} - struct chip_operations mainboard_emulation_qemu_i386_ops = { - .enable_dev = enable_dev, - //.name = "qemu mainboard ", + CHIP_NAME("qemu mainboard ") }; diff --git a/src/mainboard/ibm/e325/Config.lb b/src/mainboard/ibm/e325/Config.lb index 49ec1ccbe0..c1514000fd 100644 --- a/src/mainboard/ibm/e325/Config.lb +++ b/src/mainboard/ibm/e325/Config.lb @@ -1,123 +1,3 @@ -uses HAVE_MP_TABLE -uses HAVE_PIRQ_TABLE -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_HARD_RESET -uses HARD_RESET_BUS -uses HARD_RESET_DEVICE -uses HARD_RESET_FUNCTION -uses IRQ_SLOT_COUNT -uses HAVE_OPTION_TABLE -uses CONFIG_MAX_CPUS -uses CONFIG_IOAPIC -uses CONFIG_SMP -uses FALLBACK_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses STACK_SIZE -uses HEAP_SIZE -uses USE_OPTION_TABLE -uses LB_CKS_RANGE_START -uses LB_CKS_RANGE_END -uses LB_CKS_LOC -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR - - -## ROM_SIZE is the size of boot ROM that this board will use. -default ROM_SIZE=524288 - -### -### Build options -### - -## -## Build code for the fallback boot -## -default HAVE_FALLBACK_BOOT=1 - -## -## Build code to reset the motherboard from linuxBIOS -## -default HAVE_HARD_RESET=1 - -default HARD_RESET_BUS=1 -default HARD_RESET_DEVICE=4 -default HARD_RESET_FUNCTION=0 - -## -## Build code to export a programmable irq routing table -## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=12 - -## -## Build code to export an x86 MP table -## Useful for specifying IRQ routing values -## -default HAVE_MP_TABLE=1 - -## -## Build code to export a CMOS option table -## -default HAVE_OPTION_TABLE=1 - -## -## Move the default LinuxBIOS cmos range off of AMD RTC registers -## -default LB_CKS_RANGE_START=49 -default LB_CKS_RANGE_END=122 -default LB_CKS_LOC=123 - -## -## Build code for SMP support -## Only worry about 2 micro processors -## -default CONFIG_SMP=1 -default CONFIG_MAX_CPUS=2 - -## -## Build code to setup a generic IOAPIC -## -default CONFIG_IOAPIC=1 - -## -## Clean up the motherboard id strings -## -default MAINBOARD_PART_NUMBER="HDAMA" -default MAINBOARD_VENDOR="ARIMA" - -### -### LinuxBIOS layout values -### - -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. -default ROM_IMAGE_SIZE = 65536 - -## -## Use a small 8K stack -## -default STACK_SIZE=0x2000 - -## -## Use a small 16K heap -## -default HEAP_SIZE=0x8000 - -## -## Only use the option table in a normal image -## -default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE - ## ## Compute the location and size of where this firmware image ## (linuxBIOS plus bootloader) will live in the boot rom chip. @@ -136,7 +16,6 @@ end ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) -default CONFIG_ROM_STREAM = 1 ## ## Compute where this copy of linuxBIOS will start in the boot rom @@ -158,7 +37,6 @@ default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) ## arch i386 end -#cpu k8 end ## ## Build the objects we have code for in this directory. @@ -172,42 +50,41 @@ if HAVE_PIRQ_TABLE object irq_tables.o end ## Romcc output ## makerule ./failover.E - depends "$(MAINBOARD)/failover.c" - action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E" + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./failover.inc - depends "./failover.E ./romcc" - action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E" + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h " - action "$(CPP) -I$(TOP)/src -I. $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E" + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end makerule ./auto.inc - depends "./auto.E ./romcc" - action "./romcc -mcpu=k8 -O2 ./auto.E > auto.inc" + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end ## ## Build our 16 bit and 32 bit linuxBIOS entry code ## -mainboardinit cpu/i386/entry16.inc -mainboardinit cpu/i386/entry32.inc -mainboardinit cpu/i386/bist32.inc -ldscript /cpu/i386/entry16.lds -ldscript /cpu/i386/entry32.lds +mainboardinit cpu/x86/16bit/entry16.inc +mainboardinit cpu/x86/32bit/entry32.inc +ldscript /cpu/x86/16bit/entry16.lds +ldscript /cpu/x86/32bit/entry32.lds ## ## Build our reset vector (This is where linuxBIOS is entered) ## if USE_FALLBACK_IMAGE - mainboardinit cpu/i386/reset16.inc - ldscript /cpu/i386/reset16.lds + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds else - mainboardinit cpu/i386/reset32.inc - ldscript /cpu/i386/reset32.lds + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds end ### Should this be in the northbridge code? @@ -219,11 +96,6 @@ mainboardinit arch/i386/lib/cpu_reset.inc mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds -## -## Setup our mtrrs -## -mainboardinit cpu/k8/earlymtrr.inc - ### ### This is the early phase of linuxBIOS startup ### Things are delicate and we test to see if we should @@ -241,9 +113,12 @@ end ## ## Setup RAM ## -mainboardinit cpu/k8/enable_mmx_sse.inc +mainboardinit cpu/x86/fpu/enable_fpu.inc +mainboardinit cpu/x86/mmx/enable_mmx.inc +mainboardinit cpu/x86/sse/enable_sse.inc mainboardinit ./auto.inc -mainboardinit cpu/k8/disable_mmx_sse.inc +mainboardinit cpu/x86/sse/disable_sse.inc +mainboardinit cpu/x86/mmx/disable_mmx.inc ## ## Include the secondary Configuration files @@ -332,10 +207,3 @@ chip northbridge/amd/amdk8 end end -## -## Include the old serial code for those few places that still need it. -## -mainboardinit pc80/serial.inc -mainboardinit arch/i386/lib/console.inc -mainboardinit cpu/i386/bist32_fail.inc - diff --git a/src/mainboard/ibm/e325/Options.lb b/src/mainboard/ibm/e325/Options.lb index 807260cc55..7a00b5b150 100644 --- a/src/mainboard/ibm/e325/Options.lb +++ b/src/mainboard/ibm/e325/Options.lb @@ -117,6 +117,8 @@ default CONFIG_IOAPIC=1 ## default MAINBOARD_PART_NUMBER="E325" default MAINBOARD_VENDOR="IBM" +#default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x161f +#default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3016 ### ### LinuxBIOS layout values @@ -133,7 +135,7 @@ default STACK_SIZE=0x2000 ## ## Use a small 16K heap ## -default HEAP_SIZE=0x4000 +default HEAP_SIZE=0x8000 ## ## Only use the option table in a normal image diff --git a/src/mainboard/ibm/e325/auto.c b/src/mainboard/ibm/e325/auto.c index 2c80a7d0ad..dbbcbf597b 100644 --- a/src/mainboard/ibm/e325/auto.c +++ b/src/mainboard/ibm/e325/auto.c @@ -6,7 +6,8 @@ #include <arch/io.h> #include <device/pnp_def.h> #include <arch/romcc_io.h> -#include <arch/smp/lapic.h> +#include <cpu/x86/lapic.h> +#include <arch/cpu.h> #include "option_table.h" #include "pc80/mc146818rtc_early.c" #include "pc80/serial.c" @@ -15,13 +16,15 @@ #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" -#include "cpu/k8/apic_timer.c" +#include "cpu/amd/model_fxx/apic_timer.c" #include "lib/delay.c" -#include "cpu/p6/boot_cpu.c" +#include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" #include "northbridge/amd/amdk8/cpu_rev.c" #include "superio/NSC/pc87366/pc87366_early_serial.c" +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" #define SERIAL_DEV PNP_DEV(0x2e, PC87366_SP1) @@ -127,12 +130,8 @@ static inline int spd_read_byte(unsigned device, unsigned address) #define FIRST_CPU 1 #define SECOND_CPU 1 #define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) -static void main(void) +static void main(unsigned long bist) { - /* - * GPIO28 of 8111 will control H0_MEMRESET_L - * GPIO29 of 8111 will control H1_MEMRESET_L - */ static const struct mem_controller cpu[] = { #if FIRST_CPU { @@ -157,24 +156,30 @@ static void main(void) }, #endif }; - int needs_reset; - - enable_lapic(); - init_timer(); - - if (cpu_init_detected()) { - asm("jmp __cpu_reset"); - } - distinguish_cpu_resets(); - if (!boot_cpu()) { - stop_this_cpu(); + int needs_reset; + if (bist == 0) { + /* Skip this if there was a built in self test failure */ + amd_early_mtrr_init(); + enable_lapic(); + init_timer(); + /* Has this cpu already booted? */ + if (cpu_init_detected()) { + asm volatile ("jmp __cpu_reset"); + } + distinguish_cpu_resets(); + if (!boot_cpu()) { + stop_this_cpu(); + } } - + /* Setup the console */ pc87366_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); console_init(); + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + #if 0 print_pci_devices(); #endif @@ -224,5 +229,4 @@ static void main(void) /* Check the first 1M */ ram_check(0x00000000, 0x001000000); #endif - } diff --git a/src/mainboard/ibm/e325/chip.h b/src/mainboard/ibm/e325/chip.h index c34253735f..589d0284aa 100644 --- a/src/mainboard/ibm/e325/chip.h +++ b/src/mainboard/ibm/e325/chip.h @@ -1,4 +1,4 @@ -extern struct chip_operations mainboard_ibm_e325_control; +extern struct chip_operations mainboard_ibm_e325_ops; struct mainboard_ibm_e325_config { int nothing; diff --git a/src/mainboard/ibm/e325/mainboard.c b/src/mainboard/ibm/e325/mainboard.c index 31f5bdcb18..2ace7c3e21 100644 --- a/src/mainboard/ibm/e325/mainboard.c +++ b/src/mainboard/ibm/e325/mainboard.c @@ -3,11 +3,8 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> - -#include <arch/io.h> -#include "../../../northbridge/amd/amdk8/northbridge.h" #include "chip.h" -struct chip_operations mainboard_ibm_e325_control = { - .name = "IBM E325 mainboard ", +struct chip_operations mainboard_ibm_e325_ops = { + CHIP_NAME("IBM E325 mainboard ") }; diff --git a/src/mainboard/ibm/e325/mptable.c b/src/mainboard/ibm/e325/mptable.c index bc9d52f262..6ad8b945b4 100644 --- a/src/mainboard/ibm/e325/mptable.c +++ b/src/mainboard/ibm/e325/mptable.c @@ -4,7 +4,7 @@ #include <string.h> #include <stdint.h> -void *smp_write_config_table(void *v, unsigned long * processor_map) +void *smp_write_config_table(void *v) { static const char sig[4] = "PCMP"; static const char oem[8] = "IBM "; @@ -35,7 +35,7 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) mc->mpe_checksum = 0; mc->reserved = 0; - smp_write_processors(mc, processor_map); + smp_write_processors(mc); { device_t dev; @@ -83,20 +83,22 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) smp_write_ioapic(mc, 2, 0x11, 0xfec00000); { device_t dev; - uint32_t base; + struct resource *res; /* 8131-1 apic #3 */ dev = dev_find_slot(1, PCI_DEVFN(0x01,1)); if (dev) { - base = pci_read_config32(dev, PCI_BASE_ADDRESS_0); - base &= PCI_BASE_ADDRESS_MEM_MASK; - smp_write_ioapic(mc, 0x03, 0x11, base); + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, 0x03, 0x11, res->base); + } } /* 8131-2 apic #4 */ dev = dev_find_slot(1, PCI_DEVFN(0x02,1)); - if (dev) { - base = pci_read_config32(dev, PCI_BASE_ADDRESS_0); - base &= PCI_BASE_ADDRESS_MEM_MASK; - smp_write_ioapic(mc, 0x04, 0x11, base); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, 0x04, 0x11, res->base); + } } } @@ -164,10 +166,10 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) return smp_next_mpe_entry(mc); } -unsigned long write_smp_table(unsigned long addr, unsigned long *processor_map) +unsigned long write_smp_table(unsigned long addr) { void *v; v = smp_write_floating_table(addr); - return (unsigned long)smp_write_config_table(v, processor_map); + return (unsigned long)smp_write_config_table(v); } diff --git a/src/mainboard/newisys/khepri/Config.lb b/src/mainboard/newisys/khepri/Config.lb index 81b943c285..77e1ec8d05 100644 --- a/src/mainboard/newisys/khepri/Config.lb +++ b/src/mainboard/newisys/khepri/Config.lb @@ -1,123 +1,3 @@ -uses HAVE_MP_TABLE -uses HAVE_PIRQ_TABLE -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_HARD_RESET -uses HARD_RESET_BUS -uses HARD_RESET_DEVICE -uses HARD_RESET_FUNCTION -uses IRQ_SLOT_COUNT -uses HAVE_OPTION_TABLE -uses CONFIG_MAX_CPUS -uses CONFIG_IOAPIC -uses CONFIG_SMP -uses FALLBACK_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses STACK_SIZE -uses HEAP_SIZE -uses USE_OPTION_TABLE -uses LB_CKS_RANGE_START -uses LB_CKS_RANGE_END -uses LB_CKS_LOC -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR - - -## ROM_SIZE is the size of boot ROM that this board will use. -default ROM_SIZE=524288 - -### -### Build options -### - -## -## Build code for the fallback boot -## -default HAVE_FALLBACK_BOOT=1 - -## -## Build code to reset the motherboard from linuxBIOS -## -default HAVE_HARD_RESET=1 - -default HARD_RESET_BUS=1 -default HARD_RESET_DEVICE=4 -default HARD_RESET_FUNCTION=0 - -## -## Build code to export a programmable irq routing table -## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=9 - -## -## Build code to export an x86 MP table -## Useful for specifying IRQ routing values -## -default HAVE_MP_TABLE=1 - -## -## Build code to export a CMOS option table -## -default HAVE_OPTION_TABLE=1 - -## -## Move the default LinuxBIOS cmos range off of AMD RTC registers -## -default LB_CKS_RANGE_START=49 -default LB_CKS_RANGE_END=122 -default LB_CKS_LOC=123 - -## -## Build code for SMP support -## Only worry about 2 micro processors -## -default CONFIG_SMP=1 -default CONFIG_MAX_CPUS=2 - -## -## Build code to setup a generic IOAPIC -## -default CONFIG_IOAPIC=1 - -## -## Clean up the motherboard id strings -## -default MAINBOARD_PART_NUMBER="Khepri 2100" -default MAINBOARD_VENDOR="Newisys" - -### -### LinuxBIOS layout values -### - -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. -default ROM_IMAGE_SIZE = 65536 - -## -## Use a small 8K stack -## -default STACK_SIZE=0x2000 - -## -## Use a small 16K heap -## -default HEAP_SIZE=0x4000 - -## -## Only use the option table in a normal image -## -default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE - ## ## Compute the location and size of where this firmware image ## (linuxBIOS plus bootloader) will live in the boot rom chip. @@ -136,7 +16,6 @@ end ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) -default CONFIG_ROM_STREAM = 1 ## ## Compute where this copy of linuxBIOS will start in the boot rom @@ -158,7 +37,6 @@ default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) ## arch i386 end -#cpu k8 end ## ## Build the objects we have code for in this directory. @@ -174,42 +52,41 @@ dir /drivers/trident/blade3d ## Romcc output ## makerule ./failover.E - depends "$(MAINBOARD)/failover.c" - action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E" + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./failover.inc - depends "./failover.E ./romcc" - action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E" + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h" - action "$(CPP) -I$(TOP)/src -I. $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E" + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end makerule ./auto.inc - depends "./auto.E ./romcc" - action "./romcc -mcpu=k8 -O2 ./auto.E > auto.inc" + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end ## ## Build our 16 bit and 32 bit linuxBIOS entry code ## -mainboardinit cpu/i386/entry16.inc -mainboardinit cpu/i386/entry32.inc -mainboardinit cpu/i386/bist32.inc -ldscript /cpu/i386/entry16.lds -ldscript /cpu/i386/entry32.lds +mainboardinit cpu/x86/16bit/entry16.inc +mainboardinit cpu/x86/32bit/entry32.inc +ldscript /cpu/x86/16bit/entry16.lds +ldscript /cpu/x86/32bit/entry32.lds ## ## Build our reset vector (This is where linuxBIOS is entered) ## if USE_FALLBACK_IMAGE - mainboardinit cpu/i386/reset16.inc - ldscript /cpu/i386/reset16.lds + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds else - mainboardinit cpu/i386/reset32.inc - ldscript /cpu/i386/reset32.lds + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds end ### Should this be in the northbridge code? @@ -221,11 +98,6 @@ mainboardinit arch/i386/lib/cpu_reset.inc mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds -## -## Setup our mtrrs -## -mainboardinit cpu/k8/earlymtrr.inc - ### ### This is the early phase of linuxBIOS startup ### Things are delicate and we test to see if we should @@ -243,9 +115,12 @@ end ## ## Setup RAM ## -mainboardinit cpu/k8/enable_mmx_sse.inc +mainboardinit cpu/x86/fpu/enable_fpu.inc +mainboardinit cpu/x86/mmx/enable_mmx.inc +mainboardinit cpu/x86/sse/enable_sse.inc mainboardinit ./auto.inc -mainboardinit cpu/k8/disable_mmx_sse.inc +mainboardinit cpu/x86/sse/disable_sse.inc +mainboardinit cpu/x86/mmx/disable_mmx.inc ## ## Include the secondary Configuration files @@ -334,10 +209,3 @@ chip northbridge/amd/amdk8 end end -## -## Include the old serial code for those few places that still need it. -## -mainboardinit pc80/serial.inc -mainboardinit arch/i386/lib/console.inc -mainboardinit cpu/i386/bist32_fail.inc - diff --git a/src/mainboard/newisys/khepri/auto.c b/src/mainboard/newisys/khepri/auto.c index 6e6dec743f..1aa151f906 100644 --- a/src/mainboard/newisys/khepri/auto.c +++ b/src/mainboard/newisys/khepri/auto.c @@ -1,4 +1,6 @@ #define ASSEMBLY 1 +#undef MAXIMUM_CONSOLE_LOGLEVEL +#undef DEFAULT_CONSOLE_LOGLEVEL #define MAXIMUM_CONSOLE_LOGLEVEL 9 #define DEFAULT_CONSOLE_LOGLEVEL 9 @@ -7,7 +9,8 @@ #include <arch/io.h> #include <device/pnp_def.h> #include <arch/romcc_io.h> -#include <arch/smp/lapic.h> +#include <cpu/x86/lapic.h> +#include <arch/cpu.h> #include "option_table.h" #include "pc80/mc146818rtc_early.c" #include "pc80/serial.c" @@ -16,13 +19,15 @@ #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" -#include "cpu/k8/apic_timer.c" +#include "cpu/amd/model_fxx/apic_timer.c" #include "lib/delay.c" -#include "cpu/p6/boot_cpu.c" +#include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" #include "northbridge/amd/amdk8/cpu_rev.c" #include "superio/NSC/pc87360/pc87360_early_serial.c" +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" #define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1) @@ -126,14 +131,11 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "sdram/generic_sdram.c" -#include "resourcemap.c" /* newisys khepri does not want the default */ +/* newisys khepri does not want the default */ +#include "resourcemap.c" -static void main(void) +static void main(unsigned long bist) { - /* - * GPIO28 of 8111 will control H0_MEMRESET_L - * GPIO29 of 8111 will control H1_MEMRESET_L - */ static const struct mem_controller cpu[] = { { .node_id = 0, @@ -154,19 +156,30 @@ static void main(void) .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, }, }; + int needs_reset; - enable_lapic(); - init_timer(); - if (cpu_init_detected()) { - asm("jmp __cpu_reset"); - } - distinguish_cpu_resets(); - if (!boot_cpu()) { - stop_this_cpu(); + if (bist == 0) { + /* Skip this if there was a built in self test failure */ + amd_early_mtrr_init(); + enable_lapic(); + init_timer(); + /* Has this cpu already booted? */ + if (cpu_init_detected()) { + asm volatile ("jmp __cpu_reset"); + } + distinguish_cpu_resets(); + if (!boot_cpu()) { + stop_this_cpu(); + } } + /* Setup the console */ pc87360_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + setup_khepri_resource_map(); needs_reset = setup_coherent_ht_domain(); needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80); diff --git a/src/mainboard/newisys/khepri/chip.h b/src/mainboard/newisys/khepri/chip.h index cb4a806d66..f4889d6a65 100644 --- a/src/mainboard/newisys/khepri/chip.h +++ b/src/mainboard/newisys/khepri/chip.h @@ -1,4 +1,4 @@ -extern struct chip_operations mainboard_newisys_khepri_control; +extern struct chip_operations mainboard_newisys_khepri_ops; struct mainboard_newisys_khepri_config { int nothing; diff --git a/src/mainboard/newisys/khepri/mainboard.c b/src/mainboard/newisys/khepri/mainboard.c index 67ebd9add2..16350b2acf 100644 --- a/src/mainboard/newisys/khepri/mainboard.c +++ b/src/mainboard/newisys/khepri/mainboard.c @@ -3,12 +3,9 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> - -#include <arch/io.h> -#include "../../../northbridge/amd/amdk8/northbridge.h" #include "chip.h" -struct chip_operations mainboard_newisys_khepri_control = { - .name = "Newisys Khepri mainboard ", +struct chip_operations mainboard_newisys_khepri_ops = { + CHIP_NAME("Newisys Khepri mainboard ") }; diff --git a/src/mainboard/newisys/khepri/mptable.c b/src/mainboard/newisys/khepri/mptable.c index 314a04160b..8d7d519654 100644 --- a/src/mainboard/newisys/khepri/mptable.c +++ b/src/mainboard/newisys/khepri/mptable.c @@ -4,7 +4,7 @@ #include <string.h> #include <stdint.h> -void *smp_write_config_table(void *v, unsigned long * processor_map) +void *smp_write_config_table(void *v) { static const char sig[4] = "PCMP"; static const char oem[8] = "NEWISYS "; @@ -33,7 +33,7 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) mc->mpe_checksum = 0; mc->reserved = 0; - smp_write_processors(mc, processor_map); + smp_write_processors(mc); { device_t dev; @@ -86,20 +86,22 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) smp_write_ioapic(mc, 2, 0x11, 0xfec00000); { device_t dev; - uint32_t base; + struct resource *res; /* 8131 apic 3 */ dev = dev_find_slot(1, PCI_DEVFN(0x01,1)); if (dev) { - base = pci_read_config32(dev, PCI_BASE_ADDRESS_0); - base &= PCI_BASE_ADDRESS_MEM_MASK; - smp_write_ioapic(mc, 0x03, 0x11, base); + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, 0x03, 0x11, res->base); + } } /* 8131 apic 4 */ dev = dev_find_slot(1, PCI_DEVFN(0x02,1)); if (dev) { - base = pci_read_config32(dev, PCI_BASE_ADDRESS_0); - base &= PCI_BASE_ADDRESS_MEM_MASK; - smp_write_ioapic(mc, 0x04, 0x11, base); + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, 0x04, 0x11, res->base); + } } } @@ -216,17 +218,16 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); - mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); printk_debug("Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } -unsigned long write_smp_table(unsigned long addr, unsigned long *processor_map) +unsigned long write_smp_table(unsigned long addr) { void *v; v = smp_write_floating_table(addr); - return (unsigned long)smp_write_config_table(v, processor_map); + return (unsigned long)smp_write_config_table(v); } diff --git a/src/mainboard/technologic/ts5300/Config.lb b/src/mainboard/technologic/ts5300/Config.lb index d0ff85f1df..aeb7dc1d59 100644 --- a/src/mainboard/technologic/ts5300/Config.lb +++ b/src/mainboard/technologic/ts5300/Config.lb @@ -134,22 +134,22 @@ driver mainboard.o ## Romcc output ## makerule ./failover.E - depends "$(MAINBOARD)/failover.c" - action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E" + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./failover.inc - depends "./failover.E ./romcc" - action "./romcc -O -mcpu=c3 -o failover.inc --label-prefix=failover ./failover.E" + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./auto.E - depends "$(MAINBOARD)/auto.c" - action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E" + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -E -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end makerule ./auto.inc - depends "./auto.E ./romcc" - action "./romcc -O -mcpu=c3 ./auto.E " + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end ## @@ -218,5 +218,6 @@ chip northbridge/amd/sc520 register "enable_keyboard" = "0" register "enable_nvram" = "1" end - chip cpu/amd/sc520 + chip cpu/amd/sc520 + end end diff --git a/src/mainboard/technologic/ts5300/mainboard.c b/src/mainboard/technologic/ts5300/mainboard.c index 38b6a4ca82..e28f9715b8 100644 --- a/src/mainboard/technologic/ts5300/mainboard.c +++ b/src/mainboard/technologic/ts5300/mainboard.c @@ -3,35 +3,9 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> - -#include <arch/io.h> #include "chip.h" -static int -mainboard_scan_bus(device_t root, int maxbus) -{ - int retval; - printk_spew("%s: root %p maxbus %d\n", __FUNCTION__, root, maxbus); - retval = pci_scan_bus(root->bus, 0, 0xff, maxbus); - printk_spew("DONE %s: return %d\n", __FUNCTION__, maxbus); - return maxbus; -} - -static struct device_operations mainboard_operations = { - .read_resources = root_dev_read_resources, - .set_resources = root_dev_set_resources, - .enable_resources = root_dev_enable_resources, - .init = root_dev_init, - .scan_bus = mainboard_scan_bus, -}; - -static void enable_dev(device_t dev) -{ - dev->ops = &mainbaord_operations; -} - struct chip_operations mainboard_technologic_ts5300_control = { - .enable_dev = enable_dev, - .name = "Technologic Systems TS5300 mainboard ", + CHIP_NAME("Technologic Systems TS5300 mainboard ") }; diff --git a/src/mainboard/tyan/s2735/mainboard.c b/src/mainboard/tyan/s2735/mainboard.c index 7898d2e7e4..29cf899be8 100644 --- a/src/mainboard/tyan/s2735/mainboard.c +++ b/src/mainboard/tyan/s2735/mainboard.c @@ -119,30 +119,6 @@ static void vga_fixup(void) { } */ -static int -mainboard_scan_bus(device_t root, int maxbus) -{ - int retval; - printk_spew("%s: root %p maxbus %d\n", __FUNCTION__, root, maxbus); - retval = pci_scan_bus(root->bus, 0, 0xff, maxbus); - printk_spew("DONE %s: return %d\n", __FUNCTION__, maxbus); - return maxbus; -} - -static struct device_operations mainboard_operations = { - .read_resources = root_dev_read_resources, - .set_resources = root_dev_set_resources, - .enable_resources = root_dev_enable_resources, - .init = root_dev_init, - .scan_bus = mainboard_scan_bus, -}; - -static void enable_dev(device_t dev) -{ - dev->ops = &mainboard_operations; -} - struct chip_operations mainboard_tyan_s2735_ops = { - .enable_dev = enable_dev, + CHIP_NAME("Tyan s2735 mainboard") }; - diff --git a/src/mainboard/tyan/s2850/mainboard.c b/src/mainboard/tyan/s2850/mainboard.c index ce2405e3cd..1270b59146 100644 --- a/src/mainboard/tyan/s2850/mainboard.c +++ b/src/mainboard/tyan/s2850/mainboard.c @@ -163,111 +163,6 @@ enable(struct chip *chip, enum chip_pass pass) } #endif -#undef DEBUG -#define DEBUG 0 -#if DEBUG -static void debug_init(device_t dev) -{ - unsigned bus; - unsigned devfn; -#if 0 - for(bus = 0; bus < 256; bus++) { - for(devfn = 0; devfn < 256; devfn++) { - int i; - dev = dev_find_slot(bus, devfn); - if (!dev) { - continue; - } - if (!dev->enabled) { - continue; - } - printk_info("%02x:%02x.%0x aka %s\n", - bus, devfn >> 3, devfn & 7, dev_path(dev)); - for(i = 0; i < 256; i++) { - if ((i & 0x0f) == 0) { - printk_info("%02x:", i); - } - printk_info(" %02x", pci_read_config8(dev, i)); - if ((i & 0x0f) == 0xf) { - printk_info("\n"); - } - } - printk_info("\n"); - } - } -#endif -#if 0 - msr_t msr; - unsigned index; - unsigned eax, ebx, ecx, edx; - index = 0x80000007; - printk_debug("calling cpuid 0x%08x\n", index); - asm volatile( - "cpuid" - : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) - : "a" (index) - ); - printk_debug("cpuid[%08x]: %08x %08x %08x %08x\n", - index, eax, ebx, ecx, edx); - if (edx & (3 << 1)) { - index = 0xC0010042; - printk_debug("Reading msr: 0x%08x\n", index); - msr = rdmsr(index); - printk_debug("msr[0x%08x]: 0x%08x%08x\n", - index, msr.hi, msr.hi); - } -#endif -} - -static void debug_noop(device_t dummy) -{ -} - -static struct device_operations debug_operations = { - .read_resources = debug_noop, - .set_resources = debug_noop, - .enable_resources = debug_noop, - .init = debug_init, -}; - -static unsigned int scan_root_bus(device_t root, unsigned int max) -{ - struct device_path path; - device_t debug; - max = root_dev_scan_bus(root, max); - path.type = DEVICE_PATH_PNP; - path.u.pnp.port = 0; - path.u.pnp.device = 0; - debug = alloc_dev(&root->link[1], &path); - debug->ops = &debug_operations; - return max; -} -#endif - -static void mainboard_init(device_t dev) -{ - root_dev_init(dev); - -// do_verify_cpu_voltages(); -} - -static struct device_operations mainboard_operations = { - .read_resources = root_dev_read_resources, - .set_resources = root_dev_set_resources, - .enable_resources = root_dev_enable_resources, - .init = mainboard_init, -#if !DEBUG - .scan_bus = root_dev_scan_bus, -#else - .scan_bus = scan_root_bus, -#endif - .enable = 0, -}; - -static void enable_dev(struct device *dev) -{ - dev_root.ops = &mainboard_operations; -} struct chip_operations mainboard_tyan_s2850_ops = { - .enable_dev = enable_dev, + CHIP_NAME("Tyan s2850 mainboard") }; diff --git a/src/mainboard/tyan/s2880/mainboard.c b/src/mainboard/tyan/s2880/mainboard.c index a0014f3fae..dd27224fbe 100644 --- a/src/mainboard/tyan/s2880/mainboard.c +++ b/src/mainboard/tyan/s2880/mainboard.c @@ -163,111 +163,6 @@ enable(struct chip *chip, enum chip_pass pass) } #endif -#undef DEBUG -#define DEBUG 0 -#if DEBUG -static void debug_init(device_t dev) -{ - unsigned bus; - unsigned devfn; -#if 0 - for(bus = 0; bus < 256; bus++) { - for(devfn = 0; devfn < 256; devfn++) { - int i; - dev = dev_find_slot(bus, devfn); - if (!dev) { - continue; - } - if (!dev->enabled) { - continue; - } - printk_info("%02x:%02x.%0x aka %s\n", - bus, devfn >> 3, devfn & 7, dev_path(dev)); - for(i = 0; i < 256; i++) { - if ((i & 0x0f) == 0) { - printk_info("%02x:", i); - } - printk_info(" %02x", pci_read_config8(dev, i)); - if ((i & 0x0f) == 0xf) { - printk_info("\n"); - } - } - printk_info("\n"); - } - } -#endif -#if 0 - msr_t msr; - unsigned index; - unsigned eax, ebx, ecx, edx; - index = 0x80000007; - printk_debug("calling cpuid 0x%08x\n", index); - asm volatile( - "cpuid" - : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) - : "a" (index) - ); - printk_debug("cpuid[%08x]: %08x %08x %08x %08x\n", - index, eax, ebx, ecx, edx); - if (edx & (3 << 1)) { - index = 0xC0010042; - printk_debug("Reading msr: 0x%08x\n", index); - msr = rdmsr(index); - printk_debug("msr[0x%08x]: 0x%08x%08x\n", - index, msr.hi, msr.hi); - } -#endif -} - -static void debug_noop(device_t dummy) -{ -} - -static struct device_operations debug_operations = { - .read_resources = debug_noop, - .set_resources = debug_noop, - .enable_resources = debug_noop, - .init = debug_init, -}; - -static unsigned int scan_root_bus(device_t root, unsigned int max) -{ - struct device_path path; - device_t debug; - max = root_dev_scan_bus(root, max); - path.type = DEVICE_PATH_PNP; - path.u.pnp.port = 0; - path.u.pnp.device = 0; - debug = alloc_dev(&root->link[1], &path); - debug->ops = &debug_operations; - return max; -} -#endif - -static void mainboard_init(device_t dev) -{ - root_dev_init(dev); - -// do_verify_cpu_voltages(); -} - -static struct device_operations mainboard_operations = { - .read_resources = root_dev_read_resources, - .set_resources = root_dev_set_resources, - .enable_resources = root_dev_enable_resources, - .init = mainboard_init, -#if !DEBUG - .scan_bus = root_dev_scan_bus, -#else - .scan_bus = scan_root_bus, -#endif - .enable = 0, -}; - -static void enable_dev(struct device *dev) -{ - dev_root.ops = &mainboard_operations; -} struct chip_operations mainboard_tyan_s2880_ops = { - .enable_dev = enable_dev, + CHIP_NAME("Tayn s2880 mainboard") }; diff --git a/src/mainboard/tyan/s2881/mainboard.c b/src/mainboard/tyan/s2881/mainboard.c index e058fe6a6d..b88a992e84 100644 --- a/src/mainboard/tyan/s2881/mainboard.c +++ b/src/mainboard/tyan/s2881/mainboard.c @@ -163,111 +163,6 @@ enable(struct chip *chip, enum chip_pass pass) } #endif -#undef DEBUG -#define DEBUG 0 -#if DEBUG -static void debug_init(device_t dev) -{ - unsigned bus; - unsigned devfn; -#if 0 - for(bus = 0; bus < 256; bus++) { - for(devfn = 0; devfn < 256; devfn++) { - int i; - dev = dev_find_slot(bus, devfn); - if (!dev) { - continue; - } - if (!dev->enabled) { - continue; - } - printk_info("%02x:%02x.%0x aka %s\n", - bus, devfn >> 3, devfn & 7, dev_path(dev)); - for(i = 0; i < 256; i++) { - if ((i & 0x0f) == 0) { - printk_info("%02x:", i); - } - printk_info(" %02x", pci_read_config8(dev, i)); - if ((i & 0x0f) == 0xf) { - printk_info("\n"); - } - } - printk_info("\n"); - } - } -#endif -#if 0 - msr_t msr; - unsigned index; - unsigned eax, ebx, ecx, edx; - index = 0x80000007; - printk_debug("calling cpuid 0x%08x\n", index); - asm volatile( - "cpuid" - : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) - : "a" (index) - ); - printk_debug("cpuid[%08x]: %08x %08x %08x %08x\n", - index, eax, ebx, ecx, edx); - if (edx & (3 << 1)) { - index = 0xC0010042; - printk_debug("Reading msr: 0x%08x\n", index); - msr = rdmsr(index); - printk_debug("msr[0x%08x]: 0x%08x%08x\n", - index, msr.hi, msr.hi); - } -#endif -} - -static void debug_noop(device_t dummy) -{ -} - -static struct device_operations debug_operations = { - .read_resources = debug_noop, - .set_resources = debug_noop, - .enable_resources = debug_noop, - .init = debug_init, -}; - -static unsigned int scan_root_bus(device_t root, unsigned int max) -{ - struct device_path path; - device_t debug; - max = root_dev_scan_bus(root, max); - path.type = DEVICE_PATH_PNP; - path.u.pnp.port = 0; - path.u.pnp.device = 0; - debug = alloc_dev(&root->link[1], &path); - debug->ops = &debug_operations; - return max; -} -#endif - -static void mainboard_init(device_t dev) -{ - root_dev_init(dev); - -// do_verify_cpu_voltages(); -} - -static struct device_operations mainboard_operations = { - .read_resources = root_dev_read_resources, - .set_resources = root_dev_set_resources, - .enable_resources = root_dev_enable_resources, - .init = mainboard_init, -#if !DEBUG - .scan_bus = root_dev_scan_bus, -#else - .scan_bus = scan_root_bus, -#endif - .enable = 0, -}; - -static void enable_dev(struct device *dev) -{ - dev_root.ops = &mainboard_operations; -} struct chip_operations mainboard_tyan_s2881_ops = { - .enable_dev = enable_dev, + CHIP_NAME("Tyan s2881 mainboard") }; diff --git a/src/mainboard/tyan/s2882/auto.c b/src/mainboard/tyan/s2882/auto.c index b076acdd1a..73aeda4107 100644 --- a/src/mainboard/tyan/s2882/auto.c +++ b/src/mainboard/tyan/s2882/auto.c @@ -126,11 +126,10 @@ static inline int spd_read_byte(unsigned device, unsigned address) return smbus_read_byte(device, address); } -//#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "northbridge/amd/amdk8/resourcemap.c" #include "northbridge/amd/amdk8/raminit.c" #include "northbridge/amd/amdk8/coherent_ht.c" #include "sdram/generic_sdram.c" +#include "northbridge/amd/amdk8/resourcemap.c" #define FIRST_CPU 1 @@ -196,7 +195,7 @@ static void main(unsigned long bist) console_init(); /* Halt if there was a built in self test failure */ -// report_bist_failure(bist); + report_bist_failure(bist); setup_default_resource_map(); needs_reset = setup_coherent_ht_domain(); diff --git a/src/mainboard/tyan/s2882/mainboard.c b/src/mainboard/tyan/s2882/mainboard.c index 8bc1ac9b9a..9bee33d598 100644 --- a/src/mainboard/tyan/s2882/mainboard.c +++ b/src/mainboard/tyan/s2882/mainboard.c @@ -163,111 +163,6 @@ enable(struct chip *chip, enum chip_pass pass) } #endif -#undef DEBUG -#define DEBUG 0 -#if DEBUG -static void debug_init(device_t dev) -{ - unsigned bus; - unsigned devfn; -#if 0 - for(bus = 0; bus < 256; bus++) { - for(devfn = 0; devfn < 256; devfn++) { - int i; - dev = dev_find_slot(bus, devfn); - if (!dev) { - continue; - } - if (!dev->enabled) { - continue; - } - printk_info("%02x:%02x.%0x aka %s\n", - bus, devfn >> 3, devfn & 7, dev_path(dev)); - for(i = 0; i < 256; i++) { - if ((i & 0x0f) == 0) { - printk_info("%02x:", i); - } - printk_info(" %02x", pci_read_config8(dev, i)); - if ((i & 0x0f) == 0xf) { - printk_info("\n"); - } - } - printk_info("\n"); - } - } -#endif -#if 0 - msr_t msr; - unsigned index; - unsigned eax, ebx, ecx, edx; - index = 0x80000007; - printk_debug("calling cpuid 0x%08x\n", index); - asm volatile( - "cpuid" - : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) - : "a" (index) - ); - printk_debug("cpuid[%08x]: %08x %08x %08x %08x\n", - index, eax, ebx, ecx, edx); - if (edx & (3 << 1)) { - index = 0xC0010042; - printk_debug("Reading msr: 0x%08x\n", index); - msr = rdmsr(index); - printk_debug("msr[0x%08x]: 0x%08x%08x\n", - index, msr.hi, msr.hi); - } -#endif -} - -static void debug_noop(device_t dummy) -{ -} - -static struct device_operations debug_operations = { - .read_resources = debug_noop, - .set_resources = debug_noop, - .enable_resources = debug_noop, - .init = debug_init, -}; - -static unsigned int scan_root_bus(device_t root, unsigned int max) -{ - struct device_path path; - device_t debug; - max = root_dev_scan_bus(root, max); - path.type = DEVICE_PATH_PNP; - path.u.pnp.port = 0; - path.u.pnp.device = 0; - debug = alloc_dev(&root->link[1], &path); - debug->ops = &debug_operations; - return max; -} -#endif - -static void mainboard_init(device_t dev) -{ - root_dev_init(dev); - -// do_verify_cpu_voltages(); -} - -static struct device_operations mainboard_operations = { - .read_resources = root_dev_read_resources, - .set_resources = root_dev_set_resources, - .enable_resources = root_dev_enable_resources, - .init = mainboard_init, -#if !DEBUG - .scan_bus = root_dev_scan_bus, -#else - .scan_bus = scan_root_bus, -#endif - .enable = 0, -}; - -static void enable_dev(struct device *dev) -{ - dev_root.ops = &mainboard_operations; -} struct chip_operations mainboard_tyan_s2882_ops = { - .enable_dev = enable_dev, + CHIP_NAME("Tyan s2882 mainboard") }; diff --git a/src/mainboard/tyan/s2885/mainboard.c b/src/mainboard/tyan/s2885/mainboard.c index a51278b06a..080a9dc03d 100644 --- a/src/mainboard/tyan/s2885/mainboard.c +++ b/src/mainboard/tyan/s2885/mainboard.c @@ -163,111 +163,6 @@ enable(struct chip *chip, enum chip_pass pass) } #endif -#undef DEBUG -#define DEBUG 0 -#if DEBUG -static void debug_init(device_t dev) -{ - unsigned bus; - unsigned devfn; -#if 0 - for(bus = 0; bus < 256; bus++) { - for(devfn = 0; devfn < 256; devfn++) { - int i; - dev = dev_find_slot(bus, devfn); - if (!dev) { - continue; - } - if (!dev->enabled) { - continue; - } - printk_info("%02x:%02x.%0x aka %s\n", - bus, devfn >> 3, devfn & 7, dev_path(dev)); - for(i = 0; i < 256; i++) { - if ((i & 0x0f) == 0) { - printk_info("%02x:", i); - } - printk_info(" %02x", pci_read_config8(dev, i)); - if ((i & 0x0f) == 0xf) { - printk_info("\n"); - } - } - printk_info("\n"); - } - } -#endif -#if 0 - msr_t msr; - unsigned index; - unsigned eax, ebx, ecx, edx; - index = 0x80000007; - printk_debug("calling cpuid 0x%08x\n", index); - asm volatile( - "cpuid" - : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) - : "a" (index) - ); - printk_debug("cpuid[%08x]: %08x %08x %08x %08x\n", - index, eax, ebx, ecx, edx); - if (edx & (3 << 1)) { - index = 0xC0010042; - printk_debug("Reading msr: 0x%08x\n", index); - msr = rdmsr(index); - printk_debug("msr[0x%08x]: 0x%08x%08x\n", - index, msr.hi, msr.hi); - } -#endif -} - -static void debug_noop(device_t dummy) -{ -} - -static struct device_operations debug_operations = { - .read_resources = debug_noop, - .set_resources = debug_noop, - .enable_resources = debug_noop, - .init = debug_init, -}; - -static unsigned int scan_root_bus(device_t root, unsigned int max) -{ - struct device_path path; - device_t debug; - max = root_dev_scan_bus(root, max); - path.type = DEVICE_PATH_PNP; - path.u.pnp.port = 0; - path.u.pnp.device = 0; - debug = alloc_dev(&root->link[1], &path); - debug->ops = &debug_operations; - return max; -} -#endif - -static void mainboard_init(device_t dev) -{ - root_dev_init(dev); - -// do_verify_cpu_voltages(); -} - -static struct device_operations mainboard_operations = { - .read_resources = root_dev_read_resources, - .set_resources = root_dev_set_resources, - .enable_resources = root_dev_enable_resources, - .init = mainboard_init, -#if !DEBUG - .scan_bus = root_dev_scan_bus, -#else - .scan_bus = scan_root_bus, -#endif - .enable = 0, -}; - -static void enable_dev(struct device *dev) -{ - dev_root.ops = &mainboard_operations; -} struct chip_operations mainboard_tyan_s2885_ops = { - .enable_dev = enable_dev, + CHIP_NAME("Tyan s2885 mainboard") }; diff --git a/src/mainboard/tyan/s4880/auto.c b/src/mainboard/tyan/s4880/auto.c index a19b4fa4bc..b083ce0c91 100644 --- a/src/mainboard/tyan/s4880/auto.c +++ b/src/mainboard/tyan/s4880/auto.c @@ -256,7 +256,7 @@ static void main(unsigned long bist) console_init(); /* Halt if there was a built in self test failure */ -// report_bist_failure(bist); + report_bist_failure(bist); setup_s4880_resource_map(); needs_reset = setup_coherent_ht_domain(); diff --git a/src/mainboard/tyan/s4880/mainboard.c b/src/mainboard/tyan/s4880/mainboard.c index 1c3e40c13a..cec60e7af3 100644 --- a/src/mainboard/tyan/s4880/mainboard.c +++ b/src/mainboard/tyan/s4880/mainboard.c @@ -163,111 +163,6 @@ enable(struct chip *chip, enum chip_pass pass) } #endif -#undef DEBUG -#define DEBUG 0 -#if DEBUG -static void debug_init(device_t dev) -{ - unsigned bus; - unsigned devfn; -#if 0 - for(bus = 0; bus < 256; bus++) { - for(devfn = 0; devfn < 256; devfn++) { - int i; - dev = dev_find_slot(bus, devfn); - if (!dev) { - continue; - } - if (!dev->enabled) { - continue; - } - printk_info("%02x:%02x.%0x aka %s\n", - bus, devfn >> 3, devfn & 7, dev_path(dev)); - for(i = 0; i < 256; i++) { - if ((i & 0x0f) == 0) { - printk_info("%02x:", i); - } - printk_info(" %02x", pci_read_config8(dev, i)); - if ((i & 0x0f) == 0xf) { - printk_info("\n"); - } - } - printk_info("\n"); - } - } -#endif -#if 0 - msr_t msr; - unsigned index; - unsigned eax, ebx, ecx, edx; - index = 0x80000007; - printk_debug("calling cpuid 0x%08x\n", index); - asm volatile( - "cpuid" - : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) - : "a" (index) - ); - printk_debug("cpuid[%08x]: %08x %08x %08x %08x\n", - index, eax, ebx, ecx, edx); - if (edx & (3 << 1)) { - index = 0xC0010042; - printk_debug("Reading msr: 0x%08x\n", index); - msr = rdmsr(index); - printk_debug("msr[0x%08x]: 0x%08x%08x\n", - index, msr.hi, msr.hi); - } -#endif -} - -static void debug_noop(device_t dummy) -{ -} - -static struct device_operations debug_operations = { - .read_resources = debug_noop, - .set_resources = debug_noop, - .enable_resources = debug_noop, - .init = debug_init, -}; - -static unsigned int scan_root_bus(device_t root, unsigned int max) -{ - struct device_path path; - device_t debug; - max = root_dev_scan_bus(root, max); - path.type = DEVICE_PATH_PNP; - path.u.pnp.port = 0; - path.u.pnp.device = 0; - debug = alloc_dev(&root->link[1], &path); - debug->ops = &debug_operations; - return max; -} -#endif - -static void mainboard_init(device_t dev) -{ - root_dev_init(dev); - -// do_verify_cpu_voltages(); -} - -static struct device_operations mainboard_operations = { - .read_resources = root_dev_read_resources, - .set_resources = root_dev_set_resources, - .enable_resources = root_dev_enable_resources, - .init = mainboard_init, -#if !DEBUG - .scan_bus = root_dev_scan_bus, -#else - .scan_bus = scan_root_bus, -#endif - .enable = 0, -}; - -static void enable_dev(struct device *dev) -{ - dev_root.ops = &mainboard_operations; -} struct chip_operations mainboard_tyan_s4880_ops = { - .enable_dev = enable_dev, + CHIP_NAME("Tyan s4880 mainboard") }; diff --git a/src/mainboard/tyan/s4882/mainboard.c b/src/mainboard/tyan/s4882/mainboard.c index 59723ac4e3..39696b8741 100644 --- a/src/mainboard/tyan/s4882/mainboard.c +++ b/src/mainboard/tyan/s4882/mainboard.c @@ -162,112 +162,6 @@ enable(struct chip *chip, enum chip_pass pass) } #endif - -#undef DEBUG -#define DEBUG 0 -#if DEBUG -static void debug_init(device_t dev) -{ - unsigned bus; - unsigned devfn; -#if 0 - for(bus = 0; bus < 256; bus++) { - for(devfn = 0; devfn < 256; devfn++) { - int i; - dev = dev_find_slot(bus, devfn); - if (!dev) { - continue; - } - if (!dev->enabled) { - continue; - } - printk_info("%02x:%02x.%0x aka %s\n", - bus, devfn >> 3, devfn & 7, dev_path(dev)); - for(i = 0; i < 256; i++) { - if ((i & 0x0f) == 0) { - printk_info("%02x:", i); - } - printk_info(" %02x", pci_read_config8(dev, i)); - if ((i & 0x0f) == 0xf) { - printk_info("\n"); - } - } - printk_info("\n"); - } - } -#endif -#if 0 - msr_t msr; - unsigned index; - unsigned eax, ebx, ecx, edx; - index = 0x80000007; - printk_debug("calling cpuid 0x%08x\n", index); - asm volatile( - "cpuid" - : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) - : "a" (index) - ); - printk_debug("cpuid[%08x]: %08x %08x %08x %08x\n", - index, eax, ebx, ecx, edx); - if (edx & (3 << 1)) { - index = 0xC0010042; - printk_debug("Reading msr: 0x%08x\n", index); - msr = rdmsr(index); - printk_debug("msr[0x%08x]: 0x%08x%08x\n", - index, msr.hi, msr.hi); - } -#endif -} - -static void debug_noop(device_t dummy) -{ -} - -static struct device_operations debug_operations = { - .read_resources = debug_noop, - .set_resources = debug_noop, - .enable_resources = debug_noop, - .init = debug_init, -}; - -static unsigned int scan_root_bus(device_t root, unsigned int max) -{ - struct device_path path; - device_t debug; - max = root_dev_scan_bus(root, max); - path.type = DEVICE_PATH_PNP; - path.u.pnp.port = 0; - path.u.pnp.device = 0; - debug = alloc_dev(&root->link[1], &path); - debug->ops = &debug_operations; - return max; -} -#endif - -static void mainboard_init(device_t dev) -{ - root_dev_init(dev); - -// do_verify_cpu_voltages(); -} - -static struct device_operations mainboard_operations = { - .read_resources = root_dev_read_resources, - .set_resources = root_dev_set_resources, - .enable_resources = root_dev_enable_resources, - .init = mainboard_init, -#if !DEBUG - .scan_bus = root_dev_scan_bus, -#else - .scan_bus = scan_root_bus, -#endif - .enable = 0, -}; - -static void enable_dev(struct device *dev) -{ - dev_root.ops = &mainboard_operations; -} struct chip_operations mainboard_tyan_s4882_ops = { - .enable_dev = enable_dev, + CHIP_NAME("Tyan s4882 mainboard") }; diff --git a/src/mainboard/via/epia-m/Config.lb b/src/mainboard/via/epia-m/Config.lb index 8438fcf23b..03277abaaf 100644 --- a/src/mainboard/via/epia-m/Config.lb +++ b/src/mainboard/via/epia-m/Config.lb @@ -1,87 +1,3 @@ -uses HAVE_MP_TABLE -uses HAVE_PIRQ_TABLE -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_HARD_RESET -uses HAVE_OPTION_TABLE -uses USE_OPTION_TABLE -uses CONFIG_ROM_STREAM -uses IRQ_SLOT_COUNT -uses MAINBOARD -uses ARCH -uses FALLBACK_SIZE -uses STACK_SIZE -uses HEAP_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM_START -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses HAVE_MP_TABLE -uses HAVE_ACPI_TABLES - -## ROM_SIZE is the size of boot ROM that this board will use. -default ROM_SIZE = 256*1024 - -### -### Build options -### - -## -## Build code for the fallback boot -## -default HAVE_FALLBACK_BOOT=1 - -## -## no MP table -## -default HAVE_MP_TABLE=0 - -## -## Build code to reset the motherboard from linuxBIOS -## -default HAVE_HARD_RESET=1 - -## -## Build code to export a programmable irq routing table -## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=5 -object irq_tables.o - -## -## Build code to export a CMOS option table -## -default HAVE_OPTION_TABLE=1 - -### -### LinuxBIOS layout values -### - -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. -default ROM_IMAGE_SIZE = 65536 - -## -## Use a small 8K stack -## -default STACK_SIZE=0x2000 - -## -## Use a small 16K heap -## -default HEAP_SIZE=0x4000 - -## -## Only use the option table in a normal image -## -#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE -default USE_OPTION_TABLE = 0 - ## ## Compute the location and size of where this firmware image ## (linuxBIOS plus bootloader) will live in the boot rom chip. @@ -100,7 +16,6 @@ end ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) -default CONFIG_ROM_STREAM = 1 ## ## Compute where this copy of linuxBIOS will start in the boot rom @@ -127,8 +42,8 @@ arch i386 end ## Build the objects we have code for in this directory. ## - driver mainboard.o +if HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o if HAVE_ACPI_TABLES @@ -140,41 +55,41 @@ end ## Romcc output ## makerule ./failover.E - depends "$(MAINBOARD)/failover.c" - action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E" + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./failover.inc - depends "./failover.E ./romcc" - action "./romcc -O -mcpu=c3 -o failover.inc --label-prefix=failover ./failover.E" + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./auto.E - depends "$(MAINBOARD)/auto.c" - action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E" + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -E -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end makerule ./auto.inc - depends "./auto.E ./romcc" - action "./romcc -O -mcpu=c3 ./auto.E " + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end ## ## Build our 16 bit and 32 bit linuxBIOS entry code ## -mainboardinit cpu/i386/entry16.inc -mainboardinit cpu/i386/entry32.inc -ldscript /cpu/i386/entry16.lds -ldscript /cpu/i386/entry32.lds +mainboardinit cpu/x86/16bit/entry16.inc +mainboardinit cpu/x86/32bit/entry32.inc +ldscript /cpu/x86/16bit/entry16.lds +ldscript /cpu/x86/32bit/entry32.lds ## ## Build our reset vector (This is where linuxBIOS is entered) ## if USE_FALLBACK_IMAGE - mainboardinit cpu/i386/reset16.inc - ldscript /cpu/i386/reset16.lds + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds else - mainboardinit cpu/i386/reset32.inc - ldscript /cpu/i386/reset32.lds + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds end ### Should this be in the northbridge code? @@ -186,11 +101,6 @@ mainboardinit arch/i386/lib/cpu_reset.inc mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds -## -## Setup our mtrrs -## -# mainboardinit cpu/p6/earlymtrr.inc - ### ### This is the early phase of linuxBIOS startup ### Things are delicate and we test to see if we should @@ -208,7 +118,10 @@ end ## ## Setup RAM ## +mainboardinit cpu/x86/fpu/enable_fpu.inc +mainboardinit cpu/x86/mmx/enable_mmx.inc mainboardinit ./auto.inc +mainboardinit cpu/x86/mmx/disable_mmx.inc ## ## Include the secondary Configuration files @@ -216,30 +129,24 @@ mainboardinit ./auto.inc dir /pc80 config chip.h -northbridge via/vt8623 "vt8623" - southbridge via/vt8235 "vt8235" - register "enable_usb" = "0" - register "enable_native_ide" = "0" - register "enable_com_ports" = "1" - register "enable_keyboard" = "0" - register "enable_nvram" = "1" - end - southbridge ricoh/rl5c476 "rl5c476" - end - superio via/vt1211 "vt1211" - register "enable_com_ports" = "1" - register "enable_hwmon" = "1" - register "enable_lpt" = "1" - register "enable_fdc" = "1" +chip northbridge/via/vt8623 + device pci_domain 0 on + chip southbridge/via/vt8235 + register "enable_usb" = "0" + register "enable_native_ide" = "0" + register "enable_com_ports" = "1" + register "enable_keyboard" = "0" + register "enable_nvram" = "1" + end + chip southbridge/ricoh/rl5c476 + end + chip superio/via/vt1211 + register "enable_com_ports" = "1" + register "enable_hwmon" = "1" + register "enable_lpt" = "1" + register "enable_fdc" = "1" + end + chip cpu/via/model_centaur + end end end - -cpu p6 "cpu0" - -end - -## -## Include the old serial code for those few places that still need it. -## -mainboardinit pc80/serial.inc -mainboardinit arch/i386/lib/console.inc diff --git a/src/mainboard/via/epia-m/auto.c b/src/mainboard/via/epia-m/auto.c index 6fbc8306a4..79dbb27867 100644 --- a/src/mainboard/via/epia-m/auto.c +++ b/src/mainboard/via/epia-m/auto.c @@ -3,7 +3,9 @@ #include <stdint.h> #include <device/pci_def.h> #include <device/pci_ids.h> -#include <cpu/p6/apic.h> +#if 0 +#include <cpu/x86/lapic.h> +#endif #include <arch/io.h> #include <device/pnp_def.h> #include <arch/romcc_io.h> @@ -12,7 +14,8 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" #include "northbridge/via/vt8623/raminit.h" -#include "cpu/p6/earlymtrr.c" +#include "cpu/x86/mtrr/earlymtrr.c" +#include "cpu/x86/bist.h" /* */ @@ -24,7 +27,7 @@ void udelay(int usecs) } #include "lib/delay.c" -#include "cpu/p6/boot_cpu.c" +#include "cpu/x86/lapic/boot_cpu.c" #include "debug.c" #include "southbridge/via/vt8235/vt8235_early_smbus.c" @@ -95,10 +98,22 @@ static void enable_shadow_ram(void) pci_write_config8(dev, 0x63, shadowreg); } -static void main(void) +static void main(unsigned long bist) { unsigned long x; device_t dev; + + if (bist == 0) { + early_mtrr_init(); + } + enable_vt8235_serial(); + uart_init(); + console_init(); + + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + /* init_timer();*/ outb(5, 0x80); @@ -108,10 +123,7 @@ static void main(void) outb(5, 0x80); enable_smbus(); - enable_vt8235_serial(); - uart_init(); - console_init(); enable_mainboard_devices(); enable_shadow_ram(); @@ -144,5 +156,4 @@ static void main(void) ram_check(check_addrs[i].lo, check_addrs[i].hi); } #endif - early_mtrr_init(); } diff --git a/src/mainboard/via/epia-m/chip.h b/src/mainboard/via/epia-m/chip.h index 7b62d6d50b..2710e7b035 100644 --- a/src/mainboard/via/epia-m/chip.h +++ b/src/mainboard/via/epia-m/chip.h @@ -1,4 +1,4 @@ -extern struct chip_operations mainboard_via_epia_m_control; +extern struct chip_operations mainboard_via_epia_m_ops; struct mainboard_via_epia_m_config { int nothing; diff --git a/src/mainboard/via/epia-m/failover.c b/src/mainboard/via/epia-m/failover.c index bd0df4e89d..bdcb9eaed2 100644 --- a/src/mainboard/via/epia-m/failover.c +++ b/src/mainboard/via/epia-m/failover.c @@ -5,25 +5,28 @@ #include <arch/io.h> #include "arch/romcc_io.h" #include "pc80/mc146818rtc_early.c" -#include "cpu/p6/boot_cpu.c" -static void main(void) +static unsigned long main(unsigned long bist) { - /* for now, just always assume failure */ - -#if 0 - /* Is this a cpu reset? */ - if (cpu_init_detected()) { - if (last_boot_normal()) { - asm("jmp __normal_image"); - } else { - asm("jmp __cpu_reset"); - } - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - asm("jmp __normal_image"); + if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; } -#endif + normal_image: + asm volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + : /* clobbers */ + ); + cpu_reset: + asm volatile ("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + : /* clobbers */ + ); + fallback_image: + return bist; } diff --git a/src/mainboard/via/epia-m/mainboard.c b/src/mainboard/via/epia-m/mainboard.c index a278af7fff..9eb7b3705b 100644 --- a/src/mainboard/via/epia-m/mainboard.c +++ b/src/mainboard/via/epia-m/mainboard.c @@ -3,24 +3,13 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> - #include <arch/io.h> #include "chip.h" void vga_enable_console(); -static int -mainboard_scan_bus(device_t root, int maxbus) -{ - int retval; - printk_spew("%s: root %p maxbus %d\n", __FUNCTION__, root, maxbus); - retval = pci_scan_bus(root->bus, 0, 0xff, maxbus); - printk_spew("DONE %s: return %d\n", __FUNCTION__, maxbus); - return maxbus; -} - -void vga_fixup(void) { +static void vga_fixup(void) { // we do this right here because: // - all the hardware is working, and some VGA bioses seem to need // that @@ -36,7 +25,7 @@ void vga_fixup(void) { } -void write_protect_vgabios(void) +static void write_protect_vgabios(void) { device_t dev; @@ -44,25 +33,9 @@ void write_protect_vgabios(void) dev = dev_find_device(PCI_VENDOR_ID_VIA, 0x3123, 0); if(dev) pci_write_config8(dev, 0x61, 0xaa); - -} - -static struct device_operations mainboard_operations = { - .read_resources = root_dev_read_resources, - .set_resources = root_dev_set_resources, - .enable_resources = root_dev_enable_resources, - .init = root_dev_init, - .scan_bus = mainboard_scan_bus, - .enable = 0, -}; - -static void enable_dev(device_t dev) -{ - dev->ops = &mainboard_operations; } -struct chip_operations mainboard_via_epia_m_control = { - .enable_dev = enable_dev, - .name = "VIA EPIA-M mainboard ", +struct chip_operations mainboard_via_epia_m_ops = { + CHIP_NAME("VIA EPIA-M mainboard ") }; diff --git a/src/mainboard/via/epia/Config.lb b/src/mainboard/via/epia/Config.lb index d8485dff0a..448d86fb09 100644 --- a/src/mainboard/via/epia/Config.lb +++ b/src/mainboard/via/epia/Config.lb @@ -42,7 +42,6 @@ arch i386 end ## Build the objects we have code for in this directory. ## - driver mainboard.o if HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o @@ -51,22 +50,22 @@ if HAVE_PIRQ_TABLE object irq_tables.o end ## Romcc output ## makerule ./failover.E - depends "$(MAINBOARD)/failover.c" - action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E" + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./failover.inc - depends "./failover.E ./romcc" - action "./romcc -O -mcpu=c3 -o failover.inc --label-prefix=failover ./failover.E" + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./auto.E - depends "$(MAINBOARD)/auto.c" - action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E" + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -E -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end makerule ./auto.inc - depends "./auto.E ./romcc" - action "./romcc -O -mcpu=c3 ./auto.E " + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end ## @@ -97,11 +96,6 @@ mainboardinit arch/i386/lib/cpu_reset.inc mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds -## -## Setup our mtrrs -## -# mainboardinit cpu/p6/earlymtrr.inc - ### ### This is the early phase of linuxBIOS startup ### Things are delicate and we test to see if we should @@ -119,7 +113,10 @@ end ## ## Setup RAM ## +mainboardinit cpu/x86/fpu/enable_fpu.inc +mainboardinit cpu/x86/mmx/enable_mmx.inc mainboardinit ./auto.inc +mainboardinit cpu/x86/mmx/disable_mmx.inc ## ## Include the secondary Configuration files @@ -183,13 +180,6 @@ chip northbridge/via/vt8601 end end end - chip cpu/via/model_centaur + chip cpu/via/model_centaur end end - -## -## Include the old serial code for those few places that still need it. -## -mainboardinit pc80/serial.inc -mainboardinit arch/i386/lib/console.inc - diff --git a/src/mainboard/via/epia/auto.c b/src/mainboard/via/epia/auto.c index 377dc54754..6c8ea903ee 100644 --- a/src/mainboard/via/epia/auto.c +++ b/src/mainboard/via/epia/auto.c @@ -2,7 +2,9 @@ #include <stdint.h> #include <device/pci_def.h> +#if 0 #include <cpu/x86/lapic.h> +#endif #include <arch/io.h> #include <device/pnp_def.h> #include <arch/romcc_io.h> @@ -12,6 +14,7 @@ #include "ram/ramtest.c" #include "northbridge/via/vt8601/raminit.h" #include "cpu/x86/mtrr/earlymtrr.c" +#include "cpu/x86/bist.h" /* */ @@ -93,14 +96,19 @@ static void enable_shadow_ram(void) pci_write_config8(dev, 0x63, shadowreg); } -static void main(void) +static void main(unsigned long bist) { unsigned long x; + if (bist == 0) { + early_mtrr_init(); + } enable_vt8231_serial(); - uart_init(); console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); enable_mainboard_devices(); enable_smbus(); @@ -134,5 +142,4 @@ static void main(void) ram_check(check_addrs[i].lo, check_addrs[i].hi); } #endif - early_mtrr_init(); } diff --git a/src/mainboard/via/epia/failover.c b/src/mainboard/via/epia/failover.c index 10bb2f48c1..bdcb9eaed2 100644 --- a/src/mainboard/via/epia/failover.c +++ b/src/mainboard/via/epia/failover.c @@ -5,25 +5,28 @@ #include <arch/io.h> #include "arch/romcc_io.h" #include "pc80/mc146818rtc_early.c" -#include "cpu/x86/lapic/boot_cpu.c" -static void main(void) +static unsigned long main(unsigned long bist) { - /* for now, just always assume failure */ - -#if 0 - /* Is this a cpu reset? */ - if (cpu_init_detected()) { - if (last_boot_normal()) { - asm("jmp __normal_image"); - } else { - asm("jmp __cpu_reset"); - } - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - asm("jmp __normal_image"); + if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; } -#endif + normal_image: + asm volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + : /* clobbers */ + ); + cpu_reset: + asm volatile ("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + : /* clobbers */ + ); + fallback_image: + return bist; } diff --git a/src/mainboard/via/epia/mainboard.c b/src/mainboard/via/epia/mainboard.c index bed59cd76e..9f3326a930 100644 --- a/src/mainboard/via/epia/mainboard.c +++ b/src/mainboard/via/epia/mainboard.c @@ -3,36 +3,10 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> - #include <arch/io.h> #include "chip.h" -static unsigned int -mainboard_scan_bus(device_t root, unsigned int maxbus) -{ - int retval; - printk_spew("%s: root %p maxbus %d\n", __FUNCTION__, root, maxbus); - retval = pci_scan_bus(root->bus, 0, 0xff, maxbus); - printk_spew("DONE %s: return %d\n", __FUNCTION__, maxbus); - return maxbus; -} - -static struct device_operations mainboard_operations = { - .read_resources = root_dev_read_resources, - .set_resources = root_dev_set_resources, - .enable_resources = root_dev_enable_resources, - .init = root_dev_init, - .scan_bus = mainboard_scan_bus, - .enable = 0, -}; - -static void enable_dev(device_t dev) -{ - dev->ops = &mainboard_operations; -} - struct chip_operations mainboard_via_epia_ops = { - .enable_dev = enable_dev, - .name = "VIA EPIA mainboard ", + CHIP_NAME("VIA EPIA mainboard ") }; diff --git a/src/northbridge/amd/amdk8/northbridge.c b/src/northbridge/amd/amdk8/northbridge.c index 168661959c..8954bfefaa 100644 --- a/src/northbridge/amd/amdk8/northbridge.c +++ b/src/northbridge/amd/amdk8/northbridge.c @@ -717,6 +717,7 @@ static void enable_dev(struct device *dev) /* Set the operations if it is a special bus type */ if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) { dev->ops = &pci_domain_ops; + pci_set_method_conf1(); } else if (dev->path.type == DEVICE_PATH_APIC_CLUSTER) { dev->ops = &cpu_bus_ops; @@ -724,5 +725,6 @@ static void enable_dev(struct device *dev) } struct chip_operations northbridge_amd_amdk8_ops = { + CHIP_NAME("AMD K8 Northbridge") .enable_dev = enable_dev, }; diff --git a/src/northbridge/emulation/qemu-i386/northbridge.c b/src/northbridge/emulation/qemu-i386/northbridge.c index 09fa573090..0a8ed5c1d8 100644 --- a/src/northbridge/emulation/qemu-i386/northbridge.c +++ b/src/northbridge/emulation/qemu-i386/northbridge.c @@ -3,82 +3,75 @@ #include <stdint.h> #include <device/device.h> #include <device/pci.h> -#include <device/hypertransport.h> #include <stdlib.h> #include <string.h> #include <bitops.h> #include "chip.h" #include "northbridge.h" -void hard_reset(void) -{ - printk_err("Hard_RESET!!!\n"); -} - #define BRIDGE_IO_MASK (IORESOURCE_IO | IORESOURCE_MEM) static void pci_domain_read_resources(device_t dev) { - struct resource *resource; - unsigned reg; + struct resource *resource; - /* Initialize the system wide io space constraints */ - resource = new_resource(dev, 0); - resource->base = 0x400; - resource->limit = 0xffffUL; - resource->flags = IORESOURCE_IO; - compute_allocate_resource(&dev->link[0], resource, - IORESOURCE_IO, IORESOURCE_IO); + /* Initialize the system wide io space constraints */ + resource = new_resource(dev, IOINDEX_SUBTRACTIVE(0,0)); + resource->limit = 0xffffUL; + resource->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED; - /* Initialize the system wide memory resources constraints */ - resource = new_resource(dev, 1); - resource->limit = 0xffffffffULL; - resource->flags = IORESOURCE_MEM; - compute_allocate_resource(&dev->link[0], resource, - IORESOURCE_MEM, IORESOURCE_MEM); + /* Initialize the system wide memory resources constraints */ + resource = new_resource(dev, IOINDEX_SUBTRACTIVE(1,0)); + resource->limit = 0xffffffffULL; + resource->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED; } static void ram_resource(device_t dev, unsigned long index, - unsigned long basek, unsigned long sizek) + unsigned long basek, unsigned long sizek) { - struct resource *resource; + struct resource *resource; + + if (!sizek) { + return; + } + resource = new_resource(dev, index); + resource->base = ((resource_t)basek) << 10; + resource->size = ((resource_t)sizek) << 10; + resource->flags = IORESOURCE_MEM | IORESOURCE_CACHEABLE | \ + IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED; +} - if (!sizek) { - return; - } - resource = new_resource(dev, index); - resource->base = ((resource_t)basek) << 10; - resource->size = ((resource_t)sizek) << 10; - resource->flags = IORESOURCE_MEM | IORESOURCE_CACHEABLE | \ - IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED; +static void tolm_test(void *gp, struct device *dev, struct resource *new) +{ + struct resource **best_p = gp; + struct resource *best; + best = *best_p; + if (!best || (best->base > new->base)) { + best = new; + } + *best_p = best; } +static uint32_t find_pci_tolm(struct bus *bus) +{ + struct resource *min; + uint32_t tolm; + min = 0; + search_bus_resources(bus, IORESOURCE_MEM, IORESOURCE_MEM, tolm_test, &min); + tolm = 0xffffffffUL; + if (min && tolm > min->base) { + tolm = min->base; + } + return tolm; +} static void pci_domain_set_resources(device_t dev) { - struct resource *resource, *last; device_t mc_dev; - uint32_t pci_tolm; + uint32_t pci_tolm; uint32_t idx; - pci_tolm = 0xffffffffUL; - last = &dev->resource[dev->resources]; - for(resource = &dev->resource[0]; resource < last; resource++) - { - compute_allocate_resource(&dev->link[0], resource, - BRIDGE_IO_MASK, resource->flags & BRIDGE_IO_MASK); - - resource->flags |= IORESOURCE_STORED; - report_resource_stored(dev, resource, ""); - - if ((resource->flags & IORESOURCE_MEM) && - (pci_tolm > resource->base)) - { - pci_tolm = resource->base; - } - } - - + pci_tolm = find_pci_tolm(&dev->link[0]); mc_dev = dev->link[0].children; if (mc_dev) { unsigned long tomk, tolmk; @@ -105,29 +98,28 @@ static void pci_domain_set_resources(device_t dev) static unsigned int pci_domain_scan_bus(device_t dev, unsigned int max) { - max = pci_scan_bus(&dev->link[0], PCI_DEVFN(0, 0), 0xff, max); - return max; + max = pci_scan_bus(&dev->link[0], PCI_DEVFN(0, 0), 0xff, max); + return max; } static struct device_operations pci_domain_ops = { - .read_resources = pci_domain_read_resources, - .set_resources = pci_domain_set_resources, - .enable_resources = enable_childrens_resources, - .init = 0, - .scan_bus = pci_domain_scan_bus, + .read_resources = pci_domain_read_resources, + .set_resources = pci_domain_set_resources, + .enable_resources = enable_childrens_resources, + .init = 0, + .scan_bus = pci_domain_scan_bus, }; static void enable_dev(struct device *dev) { - struct device_path path; - - /* Set the operations if it is a special bus type */ - if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) { - dev->ops = &pci_domain_ops; - } + /* Set the operations if it is a special bus type */ + if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) { + dev->ops = &pci_domain_ops; + pci_set_method(); + } } struct chip_operations northbridge_emulation_qemu_i386_ops = { - // .name = "QEMU Northbridge", + CHIP_NAME("QEMU Northbridge") .enable_dev = enable_dev, }; diff --git a/src/northbridge/intel/e7501/northbridge.c b/src/northbridge/intel/e7501/northbridge.c index 43c354cfc1..ff65e29785 100644 --- a/src/northbridge/intel/e7501/northbridge.c +++ b/src/northbridge/intel/e7501/northbridge.c @@ -16,19 +16,14 @@ static void pci_domain_read_resources(device_t dev) unsigned reg; /* Initialize the system wide io space constraints */ - resource = new_resource(dev, 0); - resource->base = 0x400; + resource = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0)); resource->limit = 0xffffUL; - resource->flags = IORESOURCE_IO; - compute_allocate_resource(&dev->link[0], resource, - IORESOURCE_IO, IORESOURCE_IO); + resource->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED; /* Initialize the system wide memory resources constraints */ - resource = new_resource(dev, 1); + resource = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0)); resource->limit = 0xffffffffULL; - resource->flags = IORESOURCE_MEM; - compute_allocate_resource(&dev->link[0], resource, - IORESOURCE_MEM, IORESOURCE_MEM); + resource->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED; } static void ram_resource(device_t dev, unsigned long index, @@ -46,29 +41,37 @@ static void ram_resource(device_t dev, unsigned long index, IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED; } +static void tolm_test(void *gp, struct device *dev, struct resource *new) +{ + struct resource **best_p = gp; + struct resource *best; + best = *best_p; + if (!best || (best->base > new->base)) { + best = new; + } + *best_p = best; +} + +static uint32_t find_pci_tolm(struct bus *bus) +{ + struct resource *min; + uint32_t tolm; + min = 0; + search_bus_resources(bus, IORESOURCE_MEM, IORESOURCE_MEM, tolm_test, &min); + tolm = 0xffffffffUL; + if (min && tolm > min->base) { + tolm = min->base; + } + return tolm; +} + static void pci_domain_set_resources(device_t dev) { struct resource *resource, *last; device_t mc_dev; uint32_t pci_tolm; - pci_tolm = 0xffffffffUL; - last = &dev->resource[dev->resources]; - for(resource = &dev->resource[0]; resource < last; resource++) - { - compute_allocate_resource(&dev->link[0], resource, - BRIDGE_IO_MASK, resource->flags & BRIDGE_IO_MASK); - - resource->flags |= IORESOURCE_STORED; - report_resource_stored(dev, resource, ""); - - if ((resource->flags & IORESOURCE_MEM) && - (pci_tolm > resource->base)) - { - pci_tolm = resource->base; - } - } - + pci_tolm = find_pci_tolm(&dev->link[0]); mc_dev = dev->link[0].children; if (mc_dev) { /* Figure out which areas are/should be occupied by RAM. @@ -175,16 +178,16 @@ static struct device_operations cpu_bus_ops = { static void enable_dev(struct device *dev) { - struct device_path path; - /* Set the operations if it is a special bus type */ if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) { dev->ops = &pci_domain_ops; + pci_set_method_conf1(); } else if (dev->path.type == DEVICE_PATH_APIC_CLUSTER) { dev->ops = &cpu_bus_ops; } } struct chip_operations northbridge_intel_e7501_ops = { + CHIP_NAME("Intel E7501 northbridge") .enable_dev = enable_dev, }; diff --git a/src/northbridge/intel/i855pm/northbridge.c b/src/northbridge/intel/i855pm/northbridge.c index 38a0a4a196..3021397085 100644 --- a/src/northbridge/intel/i855pm/northbridge.c +++ b/src/northbridge/intel/i855pm/northbridge.c @@ -16,19 +16,14 @@ static void pci_domain_read_resources(device_t dev) unsigned reg; /* Initialize the system wide io space constraints */ - resource = new_resource(dev, 0); - resource->base = 0x400; + resource = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0)); resource->limit = 0xffffUL; - resource->flags = IORESOURCE_IO; - compute_allocate_resource(&dev->link[0], resource, - IORESOURCE_IO, IORESOURCE_IO); + resource->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED; /* Initialize the system wide memory resources constraints */ - resource = new_resource(dev, 1); + resource = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0)); resource->limit = 0xffffffffULL; - resource->flags = IORESOURCE_MEM; - compute_allocate_resource(&dev->link[0], resource, - IORESOURCE_MEM, IORESOURCE_MEM); + resource->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED; } static void ram_resource(device_t dev, unsigned long index, @@ -46,29 +41,36 @@ static void ram_resource(device_t dev, unsigned long index, IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED; } +static void tolm_test(void *gp, struct device *dev, struct resource *new) +{ + struct resource **best_p = gp; + struct resource *best; + best = *best_p; + if (!best || (best->base > new->base)) { + best = new; + } + *best_p = best; +} + +static uint32_t find_pci_tolm(struct bus *bus) +{ + struct resource *min; + uint32_t tolm; + min = 0; + search_bus_resources(bus, IORESOURCE_MEM, IORESOURCE_MEM, tolm_test, &min); + tolm = 0xffffffffUL; + if (min && tolm > min->base) { + tolm = min->base; + } + return tolm; +} + static void pci_domain_set_resources(device_t dev) { - struct resource *resource, *last; device_t mc_dev; uint32_t pci_tolm; - pci_tolm = 0xffffffffUL; - last = &dev->resource[dev->resources]; - for(resource = &dev->resource[0]; resource < last; resource++) - { - compute_allocate_resource(&dev->link[0], resource, - BRIDGE_IO_MASK, resource->flags & BRIDGE_IO_MASK); - - resource->flags |= IORESOURCE_STORED; - report_resource_stored(dev, resource, ""); - - if ((resource->flags & IORESOURCE_MEM) && - (pci_tolm > resource->base)) - { - pci_tolm = resource->base; - } - } - + pci_tolm = find_pci_tolm(&dev->link[0]); mc_dev = dev->link[0].children; if (mc_dev) { /* Figure out which areas are/should be occupied by RAM. @@ -147,6 +149,7 @@ static void enable_dev(struct device *dev) /* Set the operations if it is a special bus type */ if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) { dev->ops = &pci_domain_ops; + pci_set_method(); } else if (dev->path.type == DEVICE_PATH_APIC_CLUSTER) { dev->ops = &cpu_bus_ops; @@ -154,6 +157,6 @@ static void enable_dev(struct device *dev) } struct chip_operations northbridge_intel_i855pm_control = { - .name = "intel i855pm Northbridge", + CHIP_NAME("intel i855pm Northbridge") .enable_dev = enable_dev, }; diff --git a/src/northbridge/intel/i855pm/raminit.c b/src/northbridge/intel/i855pm/raminit.c index 5a5992268d..136e3cb51a 100644 --- a/src/northbridge/intel/i855pm/raminit.c +++ b/src/northbridge/intel/i855pm/raminit.c @@ -19,6 +19,7 @@ /* converted to C 6/2004 yhlu */ #define DEBUG_RAM_CONFIG 1 +#undef ASM_CONSOLE_LOGLEVEL #define ASM_CONSOLE_LOGLEVEL 9 #define dumpnorth() dump_pci_device(PCI_DEV(0, 0, 1)) diff --git a/src/northbridge/transmeta/tm5800/northbridge.c b/src/northbridge/transmeta/tm5800/northbridge.c index 107ebe2aed..8a85a9e704 100644 --- a/src/northbridge/transmeta/tm5800/northbridge.c +++ b/src/northbridge/transmeta/tm5800/northbridge.c @@ -19,19 +19,14 @@ static void pci_domain_read_resources(device_t dev) unsigned reg; /* Initialize the system wide io space constraints */ - resource = new_resource(dev, 0); - resource->base = 0x400; + resource = new_resource(dev, IOINDEX_SUBTRACTIVE(0,0)); resource->limit = 0xffffUL; - resource->flags = IORESOURCE_IO; - compute_allocate_resource(&dev->link[0], resource, - IORESOURCE_IO, IORESOURCE_IO); + resource->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED; /* Initialize the system wide memory resources constraints */ - resource = new_resource(dev, 1); + resource = new_resource(dev, IOINDEX_SUBTRACTIVE(1,0)); resource->limit = 0xffffffffULL; - resource->flags = IORESOURCE_MEM; - compute_allocate_resource(&dev->link[0], resource, - IORESOURCE_MEM, IORESOURCE_MEM); + resource->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED; } static void ram_resource(device_t dev, unsigned long index, @@ -49,29 +44,37 @@ static void ram_resource(device_t dev, unsigned long index, IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED; } +static void tolm_test(void *gp, struct device *dev, struct resource *new) +{ + struct resource **best_p = gp; + struct resource *best; + best = *best_p; + if (!best || (best->base > new->base)) { + best = new; + } + *best_p = best; +} + +static uint32_t find_pci_tolm(struct bus *bus) +{ + struct resource *min; + uint32_t tolm; + min = 0; + search_bus_resources(bus, IORESOURCE_MEM, IORESOURCE_MEM, tolm_test, &min); + tolm = 0xffffffffUL; + if (min && tolm > min->base) { + tolm = min->base; + } + return tolm; +} + static void pci_domain_set_resources(device_t dev) { struct resource *resource, *last; device_t mc_dev; uint32_t pci_tolm; - pci_tolm = 0xffffffffUL; - last = &dev->resource[dev->resources]; - for(resource = &dev->resource[0]; resource < last; resource++) - { - compute_allocate_resource(&dev->link[0], resource, - BRIDGE_IO_MASK, resource->flags & BRIDGE_IO_MASK); - - resource->flags |= IORESOURCE_STORED; - report_resource_stored(dev, resource, ""); - - if ((resource->flags & IORESOURCE_MEM) && - (pci_tolm > resource->base)) - { - pci_tolm = resource->base; - } - } - + pci_tolm = find_pci_tolm(&dev->link[0]); mc_dev = dev->link[0].children; if (mc_dev) { /* Figure out which areas are/should be occupied by RAM. @@ -139,6 +142,7 @@ static void enable_dev(struct device *dev) /* Set the operations if it is a special bus type */ if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) { dev->ops = &pci_domain_ops; + pci_set_method(); } else if (dev->path.type == DEVICE_PATH_APIC_CLUSTER) { dev->ops = &cpu_bus_ops; @@ -146,6 +150,6 @@ static void enable_dev(struct device *dev) } struct chip_operations northbridge_transmeta_tm5800_control = { - .name = "Transmeta tm5800 Northbridge", + CHIP_NAME("Transmeta tm5800 Northbridge") .enable_dev = enable_dev, }; diff --git a/src/northbridge/via/vt8601/northbridge.c b/src/northbridge/via/vt8601/northbridge.c index 956a485cf4..4daedc5f3e 100644 --- a/src/northbridge/via/vt8601/northbridge.c +++ b/src/northbridge/via/vt8601/northbridge.c @@ -55,19 +55,14 @@ static void pci_domain_read_resources(device_t dev) struct resource *resource; /* Initialize the system wide io space constraints */ - resource = new_resource(dev, 0); - resource->base = 0x400; + resource = new_resource(dev, IOINDEX_SUBTRACTIVE(0,0)); resource->limit = 0xffffUL; - resource->flags = IORESOURCE_IO; - compute_allocate_resource(&dev->link[0], resource, - IORESOURCE_IO, IORESOURCE_IO); + resource->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED; /* Initialize the system wide memory resources constraints */ - resource = new_resource(dev, 1); + resource = new_resource(dev, IOINDEX_SUBTRACTIVE(1,0)); resource->limit = 0xffffffffULL; - resource->flags = IORESOURCE_MEM; - compute_allocate_resource(&dev->link[0], resource, - IORESOURCE_MEM, IORESOURCE_MEM); + resource->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED; } static void ram_resource(device_t dev, unsigned long index, @@ -85,32 +80,39 @@ static void ram_resource(device_t dev, unsigned long index, IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED; } -static const uint8_t ramregs[] = {0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f, - 0x56, 0x57}; +static void tolm_test(void *gp, struct device *dev, struct resource *new) +{ + struct resource **best_p = gp; + struct resource *best; + best = *best_p; + if (!best || (best->base > new->base)) { + best = new; + } + *best_p = best; +} + +static uint32_t find_pci_tolm(struct bus *bus) +{ + struct resource *min; + uint32_t tolm; + min = 0; + search_bus_resources(bus, IORESOURCE_MEM, IORESOURCE_MEM, tolm_test, &min); + tolm = 0xffffffffUL; + if (min && tolm > min->base) { + tolm = min->base; + } + return tolm; +} static void pci_domain_set_resources(device_t dev) { - struct resource *resource, *last; + static const uint8_t ramregs[] = { + 0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f, 0x56, 0x57 + }; device_t mc_dev; uint32_t pci_tolm; - pci_tolm = 0xffffffffUL; - last = &dev->resource[dev->resources]; - for(resource = &dev->resource[0]; resource < last; resource++) - { - compute_allocate_resource(&dev->link[0], resource, - BRIDGE_IO_MASK, resource->flags & BRIDGE_IO_MASK); - - resource->flags |= IORESOURCE_STORED; - report_resource_stored(dev, resource, ""); - - if ((resource->flags & IORESOURCE_MEM) && - (pci_tolm > resource->base)) - { - pci_tolm = resource->base; - } - } - + pci_tolm = find_pci_tolm(&dev->link[0]); mc_dev = dev->link[0].children; if (mc_dev) { unsigned long tomk, tolmk; @@ -184,6 +186,7 @@ static void enable_dev(struct device *dev) /* Set the operations if it is a special bus type */ if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) { dev->ops = &pci_domain_ops; + pci_set_method(); } else if (dev->path.type == DEVICE_PATH_APIC_CLUSTER) { dev->ops = &cpu_bus_ops; @@ -191,6 +194,6 @@ static void enable_dev(struct device *dev) } struct chip_operations northbridge_via_vt8601_ops = { + CHIP_NAME("VIA vt8601 Northbridge") .enable_dev = enable_dev, - .name = "VIA vt8601 Northbridge", }; diff --git a/src/northbridge/via/vt8623/northbridge.c b/src/northbridge/via/vt8623/northbridge.c index 6597da2729..94880b9102 100644 --- a/src/northbridge/via/vt8623/northbridge.c +++ b/src/northbridge/via/vt8623/northbridge.c @@ -135,19 +135,14 @@ static void pci_domain_read_resources(device_t dev) unsigned reg; /* Initialize the system wide io space constraints */ - resource = new_resource(dev, 0); - resource->base = 0x400; + resource = new_resource(dev, IOINDEX_SUBTRACTIVE(0,0)); resource->limit = 0xffffUL; - resource->flags = IORESOURCE_IO; - compute_allocate_resource(&dev->link[0], resource, - IORESOURCE_IO, IORESOURCE_IO); + resource->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED; /* Initialize the system wide memory resources constraints */ - resource = new_resource(dev, 1); + resource = new_resource(dev, IOINDEX_SUBTRACTIVE(1,0)); resource->limit = 0xffffffffULL; - resource->flags = IORESOURCE_MEM; - compute_allocate_resource(&dev->link[0], resource, - IORESOURCE_MEM, IORESOURCE_MEM); + resource->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED; } static void ram_resource(device_t dev, unsigned long index, @@ -165,31 +160,38 @@ static void ram_resource(device_t dev, unsigned long index, IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED; } -static const uint8_t ramregs[] = {0x5a, 0x5b, 0x5c, 0x5d }; +static void tolm_test(void *gp, struct device *dev, struct resource *new) +{ + struct resource **best_p = gp; + struct resource *best; + best = *best_p; + if (!best || (best->base > new->base)) { + best = new; + } + *best_p = best; +} + +static uint32_t find_pci_tolm(struct bus *bus) +{ + struct resource *min; + uint32_t tolm; + min = 0; + search_bus_resources(bus, IORESOURCE_MEM, IORESOURCE_MEM, tolm_test, &min); + tolm = 0xffffffffUL; + if (min && tolm > min->base) { + tolm = min->base; + } + return tolm; +} static void pci_domain_set_resources(device_t dev) { + static const uint8_t ramregs[] = {0x5a, 0x5b, 0x5c, 0x5d }; struct resource *resource, *last; device_t mc_dev; uint32_t pci_tolm; - pci_tolm = 0xffffffffUL; - last = &dev->resource[dev->resources]; - for(resource = &dev->resource[0]; resource < last; resource++) - { - compute_allocate_resource(&dev->link[0], resource, - BRIDGE_IO_MASK, resource->flags & BRIDGE_IO_MASK); - - resource->flags |= IORESOURCE_STORED; - report_resource_stored(dev, resource, ""); - - if ((resource->flags & IORESOURCE_MEM) && - (pci_tolm > resource->base)) - { - pci_tolm = resource->base; - } - } - + pci_tolm = find_pci_tolm(&dev->link[0]); mc_dev = dev->link[0].children; if (mc_dev) { unsigned long tomk, tolmk; @@ -266,6 +268,7 @@ static void enable_dev(struct device *dev) /* Set the operations if it is a special bus type */ if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) { dev->ops = &pci_domain_ops; + pci_set_method(); } else if (dev->path.type == DEVICE_PATH_APIC_CLUSTER) { dev->ops = &cpu_bus_ops; @@ -273,6 +276,6 @@ static void enable_dev(struct device *dev) } struct chip_operations northbridge_via_vt8623_control = { + CHIP_NAME("VIA vt8623 Northbridge") .enable_dev = enable_dev, - .name = "VIA vt8623 Northbridge", }; diff --git a/src/northbridge/via/vt8623/raminit.c b/src/northbridge/via/vt8623/raminit.c index 10086a02fd..03765489db 100644 --- a/src/northbridge/via/vt8623/raminit.c +++ b/src/northbridge/via/vt8623/raminit.c @@ -1,4 +1,4 @@ -#include <cpu/p6/mtrr.h> +#include <cpu/x86/mtrr.h> #include "raminit.h" /* diff --git a/src/southbridge/amd/amd8111/amd8111.c b/src/southbridge/amd/amd8111/amd8111.c index 238a997916..5c29534ac3 100644 --- a/src/southbridge/amd/amd8111/amd8111.c +++ b/src/southbridge/amd/amd8111/amd8111.c @@ -65,5 +65,6 @@ void amd8111_enable(device_t dev) } struct chip_operations southbridge_amd_amd8111_ops = { + CHIP_NAME("AMD 8111") .enable_dev = amd8111_enable, }; diff --git a/src/southbridge/intel/i82801dbm/i82801dbm.c b/src/southbridge/intel/i82801dbm/i82801dbm.c index ee9b60ab7f..29804dfbc5 100644 --- a/src/southbridge/intel/i82801dbm/i82801dbm.c +++ b/src/southbridge/intel/i82801dbm/i82801dbm.c @@ -51,6 +51,6 @@ void i82801dbm_enable(device_t dev) } struct chip_operations southbridge_intel_i82801dbm_control = { - .name = "Intel 82801dbm Southbridge", + CHIP_NAME("Intel 82801dbm Southbridge") .enable_dev = i82801dbm_enable, }; diff --git a/src/southbridge/intel/i82801er/i82801er.c b/src/southbridge/intel/i82801er/i82801er.c index c721a29983..79ad25e8b0 100644 --- a/src/southbridge/intel/i82801er/i82801er.c +++ b/src/southbridge/intel/i82801er/i82801er.c @@ -51,5 +51,6 @@ void i82801er_enable(device_t dev) } struct chip_operations southbridge_intel_i82801er_ops = { + CHIP_NAME("Intel 82801er Southbridge") .enable_dev = i82801er_enable, }; diff --git a/src/southbridge/ricoh/rl5c476/rl5c476.c b/src/southbridge/ricoh/rl5c476/rl5c476.c index 4240f96a40..2f42fe752c 100644 --- a/src/southbridge/ricoh/rl5c476/rl5c476.c +++ b/src/southbridge/ricoh/rl5c476/rl5c476.c @@ -223,6 +223,6 @@ static struct pci_driver ricoh_rl5c476_driver __pci_driver = { }; struct chip_operations southbridge_ricoh_rl5c476_control = { + CHIP_NAME("RICOH RL5C476") .enable = southbridge_init, - .name = "RICOH RL5C476" }; diff --git a/src/southbridge/via/vt8231/vt8231.c b/src/southbridge/via/vt8231/vt8231.c index 082b64e0f3..d78bb2cf86 100644 --- a/src/southbridge/via/vt8231/vt8231.c +++ b/src/southbridge/via/vt8231/vt8231.c @@ -436,6 +436,6 @@ static void southbridge_enable(struct device *dev) } struct chip_operations southbridge_via_vt8231_ops = { + CHIP_NAME("VIA vt8231") .enable_dev = southbridge_enable, - .name = "VIA vt8231" }; diff --git a/src/southbridge/via/vt8235/vt8235.c b/src/southbridge/via/vt8235/vt8235.c index 29d32df8fa..d2c78aff2a 100644 --- a/src/southbridge/via/vt8235/vt8235.c +++ b/src/southbridge/via/vt8235/vt8235.c @@ -558,6 +558,6 @@ static void southbridge_init(struct chip *chip, enum chip_pass pass) } struct chip_operations southbridge_via_vt8235_control = { + CHIP_NAME("VIA vt8235") .enable = southbridge_init, - .name = "VIA vt8235" }; diff --git a/src/superio/NSC/pc87360/superio.c b/src/superio/NSC/pc87360/superio.c index af7d72bf57..fc57a95d8e 100644 --- a/src/superio/NSC/pc87360/superio.c +++ b/src/superio/NSC/pc87360/superio.c @@ -71,5 +71,6 @@ static void enable_dev(struct device *dev) } struct chip_operations superio_NSC_pc87360_ops = { + CHIP_NAME("NSC 87360") .enable_dev = enable_dev, }; diff --git a/src/superio/NSC/pc87366/chip.h b/src/superio/NSC/pc87366/chip.h index 90ea8c69cc..b477a6f750 100644 --- a/src/superio/NSC/pc87366/chip.h +++ b/src/superio/NSC/pc87366/chip.h @@ -5,7 +5,7 @@ #define SIO_COM2_BASE 0x2F8 #endif -extern struct chip_operations superio_NSC_pc87366_control; +extern struct chip_operations superio_NSC_pc87366_ops; #include <pc80/keyboard.h> #include <uart8250.h> diff --git a/src/superio/NSC/pc87366/superio.c b/src/superio/NSC/pc87366/superio.c index 6b8db55573..03e2a4f8a8 100644 --- a/src/superio/NSC/pc87366/superio.c +++ b/src/superio/NSC/pc87366/superio.c @@ -66,11 +66,11 @@ static struct pnp_info pnp_dev_info[] = { static void enable_dev(struct device *dev) { - pnp_enable_device(dev, &pnp_ops, + pnp_enable_devices(dev, &pnp_ops, sizeof(pnp_dev_info)/sizeof(pnp_dev_info[0]), pnp_dev_info); } -struct chip_operations superio_NSC_pc87366_control = { +struct chip_operations superio_NSC_pc87366_ops = { + CHIP_NAME("NSC 87366") .enable_dev = enable_dev, - .name = "NSC 87366" }; diff --git a/src/superio/NSC/pc97307/superio.c b/src/superio/NSC/pc97307/superio.c index a0732d05f2..2f06b766e0 100644 --- a/src/superio/NSC/pc97307/superio.c +++ b/src/superio/NSC/pc97307/superio.c @@ -72,11 +72,11 @@ static struct pnp_info pnp_dev_info[] = { static void enable_dev(struct device *dev) { - pnp_enable_device(dev, &pnp_ops, + pnp_enable_devices(dev, &pnp_ops, sizeof(pnp_dev_info)/sizeof(pnp_dev_info[0]), pnp_dev_info); } struct chip_operations superio_NSC_pc97307_control = { + CHIP_NAME("NSC 97307") .enable_dev = enable_dev, - .name = "NSC 97307" }; diff --git a/src/superio/via/vt1211/vt1211.c b/src/superio/via/vt1211/vt1211.c index 5a92ebcfc6..c537429fcd 100644 --- a/src/superio/via/vt1211/vt1211.c +++ b/src/superio/via/vt1211/vt1211.c @@ -142,7 +142,7 @@ static void enumerate(struct chip *chip) } struct chip_operations superio_via_vt1211_control = { + CHIP_NAME("VIA vt1211") .enumerate = enumerate, .enable = superio_init, - .name = "VIA vt1211" }; diff --git a/src/superio/winbond/w83627hf/superio.c b/src/superio/winbond/w83627hf/superio.c index 9bb615bf6f..66b8aea0d5 100644 --- a/src/superio/winbond/w83627hf/superio.c +++ b/src/superio/winbond/w83627hf/superio.c @@ -16,21 +16,23 @@ #include "w83627hf.h" -void pnp_enter_ext_func_mode(device_t dev) { +static void pnp_enter_ext_func_mode(device_t dev) +{ outb(0x87, dev->path.u.pnp.port); outb(0x87, dev->path.u.pnp.port); } -void pnp_exit_ext_func_mode(device_t dev) { +static void pnp_exit_ext_func_mode(device_t dev) +{ outb(0xaa, dev->path.u.pnp.port); } -void pnp_write_hwm(unsigned long port_base, uint8_t reg, uint8_t value) +static void pnp_write_hwm(unsigned long port_base, uint8_t reg, uint8_t value) { outb(reg, port_base+5); outb(value, port_base+6); } -uint8_t pnp_read_hwm(unsigned long port_base, uint8_t reg) +static uint8_t pnp_read_hwm(unsigned long port_base, uint8_t reg) { outb(reg, port_base + 5); return inb(port_base + 6); @@ -215,7 +217,7 @@ static void enable_dev(struct device *dev) } struct chip_operations superio_winbond_w83627hf_ops = { -// .name = "Winbond w83627hf", + CHIP_NAME("Winbond w83627hf") .enable_dev = enable_dev, }; diff --git a/src/superio/winbond/w83627hf/w83627hf_early_serial.c b/src/superio/winbond/w83627hf/w83627hf_early_serial.c index b1c7db4bed..6ca089ac50 100644 --- a/src/superio/winbond/w83627hf/w83627hf_early_serial.c +++ b/src/superio/winbond/w83627hf/w83627hf_early_serial.c @@ -1,12 +1,14 @@ #include <arch/romcc_io.h> #include "w83627hf.h" -static inline void pnp_enter_ext_func_mode(device_t dev) { +static inline void pnp_enter_ext_func_mode(device_t dev) +{ unsigned port = dev>>8; outb(0x87, port); outb(0x87, port); } -static void pnp_exit_ext_func_mode(device_t dev) { +static void pnp_exit_ext_func_mode(device_t dev) +{ unsigned port = dev>>8; outb(0xaa, port); } diff --git a/src/superio/winbond/w83627thf/chip.h b/src/superio/winbond/w83627thf/chip.h index a25b944b19..a327121db4 100644 --- a/src/superio/winbond/w83627thf/chip.h +++ b/src/superio/winbond/w83627thf/chip.h @@ -5,7 +5,7 @@ #define SIO_COM2_BASE 0x2F8 #endif -extern struct chip_operations superio_winbond_w83627thf_control; +extern struct chip_operations superio_winbond_w83627thf_ops; #include <pc80/keyboard.h> #include <uart8250.h> diff --git a/src/superio/winbond/w83627thf/superio.c b/src/superio/winbond/w83627thf/superio.c index 378be49f16..7cefff4260 100644 --- a/src/superio/winbond/w83627thf/superio.c +++ b/src/superio/winbond/w83627thf/superio.c @@ -15,27 +15,37 @@ #include "chip.h" #include "w83627thf.h" -static void init(device_t dev) +static void w83627thf_enter_ext_func_mode(device_t dev) +{ + outb(0x87, dev->path.u.pnp.port); + outb(0x87, dev->path.u.pnp.port); +} +static void w83627thf_exit_ext_func_mode(device_t dev) +{ + outb(0xaa, dev->path.u.pnp.port); +} + +static void w83627thf_init(device_t dev) { struct superio_winbond_w83627thf_config *conf; struct resource *res0, *res1; /* Wishlist handle well known programming interfaces more * generically. */ - if (!dev->enable) { + if (!dev->enabled) { return; } conf = dev->chip_info; switch(dev->path.u.pnp.device) { - case W83627HF_SP1: + case W83627THF_SP1: res0 = find_resource(dev, PNP_IDX_IO0); init_uart8250(res0->base, &conf->com1); break; - case W83627HF_SP2: + case W83627THF_SP2: res0 = find_resource(dev, PNP_IDX_IO0); init_uart8250(res0->base, &conf->com2); break; - case W83627HF_KBC: + case W83627THF_KBC: res0 = find_resource(dev, PNP_IDX_IO0); res1 = find_resource(dev, PNP_IDX_IO1); init_pc_keyboard(res0->base, res1->base, &conf->keyboard); @@ -43,36 +53,58 @@ static void init(device_t dev) } } +static void w83627thf_set_resources(device_t dev) +{ + w83627thf_enter_ext_func_mode(dev); + pnp_set_resources(dev); + w83627thf_exit_ext_func_mode(dev); +} + +static void w83627thf_enable_resources(device_t dev) +{ + w83627thf_enter_ext_func_mode(dev); + pnp_enable_resources(dev); + w83627thf_exit_ext_func_mode(dev); +} + +static void w83627thf_enable(device_t dev) +{ + w83627thf_enter_ext_func_mode(dev); + pnp_enable(dev); + w83627thf_exit_ext_func_mode(dev); +} + + static struct device_operations ops = { .read_resources = pnp_read_resources, - .set_resources = pnp_set_resources, - .enable_resources = pnp_enable_resources, - .enable = pnp_enable, - .init = init, + .set_resources = w83627thf_set_resources, + .enable_resources = w83627thf_enable_resources, + .enable = w83627thf_enable, + .init = w83627thf_init, }; static struct pnp_info pnp_dev_info[] = { - { &ops, W83627HF_FDC, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, { 0x07f8, 0}, }, - { &ops, W83627HF_PP, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, { 0x07f8, 0}, }, - { &ops, W83627HF_SP1, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, }, - { &ops, W83627HF_SP2, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, }, + { &ops, W83627THF_FDC, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, { 0x07f8, 0}, }, + { &ops, W83627THF_PP, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, { 0x07f8, 0}, }, + { &ops, W83627THF_SP1, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, }, + { &ops, W83627THF_SP2, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, }, // No 4 { 0,}, - { &ops, W83627HF_KBC, PNP_IO0 | PNP_IO1 | PNP_IRQ0 | PNP_IRQ1, { 0x7ff, 0 }, { 0x7ff, 0x4}, }, - { &ops, W83627HF_CIR, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, }, - { &ops, W83627HF_GAME_MIDI_GPIO1, PNP_IO0 | PNP_IO1 | PNP_IRQ0, { 0x7ff, 0 }, {0x7fe, 4} }, - // { W83627HF_GPIO2,}, - // { W83627HF_GPIO3,}, - { &ops, W83627HF_ACPI, PNP_IRQ0, }, - { &ops, W83627HF_HWM, PNP_IO0 | PNP_IRQ0, { 0xff8, 0 } }, + { &ops, W83627THF_KBC, PNP_IO0 | PNP_IO1 | PNP_IRQ0 | PNP_IRQ1, { 0x7ff, 0 }, { 0x7ff, 0x4}, }, + { &ops, W83627THF_CIR, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, }, + { &ops, W83627THF_GAME_MIDI_GPIO1, PNP_IO0 | PNP_IO1 | PNP_IRQ0, { 0x7ff, 0 }, {0x7fe, 4} }, + // { W83627THF_GPIO2,}, + // { W83627THF_GPIO3,}, + { &ops, W83627THF_ACPI, PNP_IRQ0, }, + { &ops, W83627THF_HWM, PNP_IO0 | PNP_IRQ0, { 0xff8, 0 } }, }; static void enable_dev(device_t dev) { - pnp_enable_device(dev, &pnp_ops, + pnp_enable_devices(dev, &pnp_ops, sizeof(pnp_dev_info)/sizeof(pnp_dev_info[0]), pnp_dev_info); } -struct chip_operations superio_winbond_w83627thf_control = { +struct chip_operations superio_winbond_w83627thf_ops = { + CHIP_NAME("Winbond w83627thf") .enable_dev = enable_dev, - .name = "Winbond w83627thf" }; |