diff options
Diffstat (limited to 'src')
24 files changed, 2004 insertions, 12 deletions
diff --git a/src/mainboard/tyan/s2850/Config.lb b/src/mainboard/tyan/s2850/Config.lb new file mode 100644 index 0000000000..fe6f7e319e --- /dev/null +++ b/src/mainboard/tyan/s2850/Config.lb @@ -0,0 +1,177 @@ +uses HAVE_MP_TABLE +uses HAVE_PIRQ_TABLE +uses USE_FALLBACK_IMAGE +uses MAINBOARD +uses ARCH +# +# +### +### Set all of the defaults for an x86 architecture +### +# +# +### +### Build the objects we have code for in this directory. +### +##object mainboard.o +config chip.h +register "fixup_scsi" = "1" +register "fixup_vga" = "1" + + +driver mainboard.o +driver adaptec_scsi.o +driver promise_sata.o +driver intel_nic.o +driver broadcom_nic.o +object reset.o +#object static_devices.o +if HAVE_MP_TABLE object mptable.o end +if HAVE_PIRQ_TABLE object irq_tables.o end +# +arch i386 end +#cpu k8 end +# +### +### Build our 16 bit and 32 bit linuxBIOS entry code +### +mainboardinit cpu/i386/entry16.inc +mainboardinit cpu/i386/entry32.inc +ldscript /cpu/i386/entry16.lds +ldscript /cpu/i386/entry32.lds +# +### +### Build our reset vector (This is where linuxBIOS is entered) +### +if USE_FALLBACK_IMAGE + mainboardinit cpu/i386/reset16.inc + ldscript /cpu/i386/reset16.lds +else + mainboardinit cpu/i386/reset32.inc + ldscript /cpu/i386/reset32.lds +end +# +#### Should this be in the northbridge code? +mainboardinit arch/i386/lib/cpu_reset.inc +# +### +### Include an id string (For safe flashing) +### +mainboardinit arch/i386/lib/id.inc +ldscript /arch/i386/lib/id.lds +# +#### +#### This is the early phase of linuxBIOS startup +#### Things are delicate and we test to see if we should +#### failover to another image. +#### +#option MAX_REBOOT_CNT=2 +if USE_FALLBACK_IMAGE + ldscript /arch/i386/lib/failover.lds +end +# +### +### Setup our mtrrs +### +mainboardinit cpu/k8/earlymtrr.inc +### +### Only the bootstrap cpu makes it here. +### Failover if we need to +### +# +if USE_FALLBACK_IMAGE + mainboardinit ./failover.inc +end + +# +# +### +### Setup the serial port +### +#mainboardinit superiowinbond/w83627hf/setup_serial.inc +mainboardinit pc80/serial.inc +mainboardinit arch/i386/lib/console.inc +# +#### +#### O.k. We aren't just an intermediary anymore! +#### +# +### +### When debugging disable the watchdog timer +### +##option MAXIMUM_CONSOLE_LOGLEVEL=7 +#default MAXIMUM_CONSOLE_LOGLEVEL=7 +# +#if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc end +# +### +### Romcc output +### +#makerule ./failover.E dep "$(MAINBOARD)/failover.c" act "$(CPP) -I$(TOP)/src $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failever.E" +#makerule ./failover.inc dep "./romcc ./failover.E" act "./romcc -O ./failover.E > failover.inc" +#mainboardinit .failover.inc + +makerule ./failover.E + depends "$(MAINBOARD)/failover.c" + action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E" +end + +makerule ./failover.inc + depends "./romcc ./failover.E" + action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"end + +makerule ./auto.E + depends "$(MAINBOARD)/auto.c" + action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E" +end +makerule ./auto.inc + depends "./romcc ./auto.E" + action "./romcc -O -mcpu=k8 -o auto.inc --label-prefix=auto ./auto.E" +# action "./romcc -mcpu=k8 -O ./auto.E > auto.inc" +end +mainboardinit cpu/k8/enable_mmx_sse.inc +mainboardinit ./auto.inc +mainboardinit cpu/k8/disable_mmx_sse.inc +# +### +### Include the secondary Configuration files +### +northbridge amd/amdk8 "mc0" + pci 0:18.0 + pci 0:18.0 + pci 0:18.0 + pci 0:18.1 + pci 0:18.2 + pci 0:18.3 + southbridge amd/amd8111 "amd8111" link 0 + pci 0:0.0 + pci 0:1.0 on + pci 0:1.1 on + pci 0:1.2 on + pci 0:1.3 on + pci 0:1.5 off + pci 0:1.6 off + pci 1:0.0 on + pci 1:0.1 on + pci 1:0.2 on + pci 1:1.0 off + end +end + +#northbridge amd/amdk8 +#end +#southbridge amd/amd8111 "amd8111" +#end +#mainboardinit archi386/smp/secondary.inc +#superio NSC/pc87360 +# register "com1" = "{1}" +# register "lpt" = "{1}" +#end +dir /pc80 +##dir /src/superio/winbond/w83627hf +#dir /bioscall +#dir /cpu/k8 +cpu k8 "cpu0" + register "up" = "{.chip = &amd8111, .ht_width=8, .ht_speed=200}" +end + diff --git a/src/mainboard/tyan/s2850/VERSION b/src/mainboard/tyan/s2850/VERSION new file mode 100644 index 0000000000..cd5ac039d6 --- /dev/null +++ b/src/mainboard/tyan/s2850/VERSION @@ -0,0 +1 @@ +2.0 diff --git a/src/mainboard/tyan/s2850/auto.c b/src/mainboard/tyan/s2850/auto.c new file mode 100644 index 0000000000..d7ed13235e --- /dev/null +++ b/src/mainboard/tyan/s2850/auto.c @@ -0,0 +1,179 @@ +#define ASSEMBLY 1 +#include <stdint.h> +#include <device/pci_def.h> +#include <cpu/p6/apic.h> +#include <arch/io.h> +#include <arch/romcc_io.h> +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" +#include "northbridge/amd/amdk8/early_ht.c" +#include "southbridge/amd/amd8111/amd8111_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/k8/apic_timer.c" +#include "lib/delay.c" +#include "cpu/p6/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "debug.c" +#include "northbridge/amd/amdk8/cpu_rev.c" + + +#define REV_B_RESET 0 +static void memreset_setup(void) +{ +#if REV_B_RESET==1 + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 +#else + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 +#endif + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ + udelay(800); +#if REV_B_RESET==1 + outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 +#endif + udelay(90); +} + +static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes) +{ + uint32_t ret=0x00010101; /* default row entry */ + + return ret; +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +/* include mainboard specific ht code */ +#include "hypertransport.c" + +//#include "northbridge/amd/amdk8/cpu_ldtstop.c" +//#include "southbridge/amd/amd8111/amd8111_ldtstop.c" + +#include "northbridge/amd/amdk8/raminit.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "sdram/generic_sdram.c" + +static void enable_lapic(void) +{ + msr_t msr; + msr = rdmsr(0x1b); + msr.hi &= 0xffffff00; + msr.lo &= 0x000007ff; + msr.lo |= APIC_DEFAULT_BASE | (1 << 11); + wrmsr(0x1b, msr); +} + +static void stop_this_cpu(void) +{ + unsigned apicid; + apicid = apic_read(APIC_ID) >> 24; + + /* Send an APIC INIT to myself */ + apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid)); + apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT); + /* Wait for the ipi send to finish */ + apic_wait_icr_idle(); + + /* Deassert the APIC INIT */ + apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid)); + apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT); + /* Wait for the ipi send to finish */ + apic_wait_icr_idle(); + + /* If I haven't halted spin forever */ + for(;;) { + hlt(); + } +} +#define FIRST_CPU 1 +#define SECOND_CPU 0 +#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) +static void main(void) +{ + static const struct mem_controller cpu[] = { +#if FIRST_CPU + { + .node_id = 0, + .f0 = PCI_DEV(0, 0x18, 0), + .f1 = PCI_DEV(0, 0x18, 1), + .f2 = PCI_DEV(0, 0x18, 2), + .f3 = PCI_DEV(0, 0x18, 3), + .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, + .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, + }, +#endif +#if SECOND_CPU + { + .node_id = 1, + .f0 = PCI_DEV(0, 0x19, 0), + .f1 = PCI_DEV(0, 0x19, 1), + .f2 = PCI_DEV(0, 0x19, 2), + .f3 = PCI_DEV(0, 0x19, 3), + .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, + .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, + }, +#endif + }; + if (cpu_init_detected()) { + asm("jmp __cpu_reset"); + } + enable_lapic(); + init_timer(); + if (!boot_cpu() ) { + notify_bsp_ap_is_stopped(); + stop_this_cpu(); + } + uart_init(); + console_init(); + setup_default_resource_map(); + setup_coherent_ht_domain(); + enumerate_ht_chain(0); + distinguish_cpu_resets(0); + +#if 0 + print_pci_devices(); +#endif + enable_smbus(); +#if 0 + dump_spd_registers(&cpu[0]); +#endif + memreset_setup(); + sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); + +#if 0 + dump_pci_devices(); +#endif +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 1)); +#endif + + /* Check all of memory */ +#if 0 + msr_t msr; + msr = rdmsr(TOP_MEM2); + print_debug("TOP_MEM2: "); + print_debug_hex32(msr.hi); + print_debug_hex32(msr.lo); + print_debug("\r\n"); +#endif +/* +#if 0 + ram_check(0x00000000, msr.lo+(msr.hi<<32)); +#else +#if TOTAL_CPUS < 2 + // Check 16MB of memory @ 0 + ram_check(0x00000000, 0x01000000); +#else + // Check 16MB of memory @ 2GB + ram_check(0x80000000, 0x81000000); +#endif +#endif +*/ +} diff --git a/src/mainboard/tyan/s2850/chip.h b/src/mainboard/tyan/s2850/chip.h new file mode 100644 index 0000000000..6d93b71025 --- /dev/null +++ b/src/mainboard/tyan/s2850/chip.h @@ -0,0 +1,6 @@ +extern struct chip_control mainboard_tyan_s2850_control; + +struct mainboard_tyan_s2850_config { + int fixup_scsi; + int fixup_vga; +}; diff --git a/src/mainboard/tyan/s2850/cmos.layout b/src/mainboard/tyan/s2850/cmos.layout new file mode 100644 index 0000000000..5ba4c032c1 --- /dev/null +++ b/src/mainboard/tyan/s2850/cmos.layout @@ -0,0 +1,74 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +1008 16 h 0 check_sum + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM + +checksums + +checksum 392 1007 1008 + + diff --git a/src/mainboard/tyan/s2850/failover.c b/src/mainboard/tyan/s2850/failover.c new file mode 100644 index 0000000000..8eeeaef7e1 --- /dev/null +++ b/src/mainboard/tyan/s2850/failover.c @@ -0,0 +1,38 @@ +#define ASSEMBLY 1 +#include <stdint.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include "arch/romcc_io.h" +#include "pc80/mc146818rtc_early.c" +#include "southbridge/amd/amd8111/amd8111_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" +#include "cpu/p6/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" + +static void main(void) +{ + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + enumerate_ht_chain(0); + + /* Setup the 8111 */ + amd8111_enable_rom(); + + /* Is this a cpu reset? */ + if (cpu_init_detected()) { + if (last_boot_normal()) { + asm("jmp __normal_image"); + } else { + asm("jmp __cpu_reset"); + } + } + /* Is this a secondary cpu? */ + else if (!boot_cpu() && last_boot_normal()) { + asm("jmp __normal_image"); + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + asm("jmp __normal_image"); + } +} diff --git a/src/mainboard/tyan/s2850/irq_tables.c b/src/mainboard/tyan/s2850/irq_tables.c new file mode 100644 index 0000000000..3f1e5bdf24 --- /dev/null +++ b/src/mainboard/tyan/s2850/irq_tables.c @@ -0,0 +1,36 @@ +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ + +#include <arch/pirq_routing.h> + +const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*12, /* there can be total 12 devices on the bus */ + 1, /* Where the interrupt router lies (bus) */ + (2<<3)|3, /* Where the interrupt router lies (dev) */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x1022, /* Vendor */ + 0x746b, /* Device */ + 0, /* Crap (miniport) */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x9b, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ + { + {1,(2<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, + {0x2,0, {{0, 0}, {0, 0}, {0, 0}, {0x4, 0xdef8}}, 0, 0}, + {0x2,0x68, {{0x4, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, + {0x2,0x58, {{0x3, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, + {0x2,0x18, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x5, 0}, + {0x2,0x30, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x1, 0}, + {0x2,0x38, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x2, 0}, + {0x2,0x40, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x3, 0}, + {0x2,0x48, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x4, 0}, + {0x2,0x50, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x5, 0}, + {0x2,0x70, {{0x1, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, + {0x2,0x60, {{0x2, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, + } +}; diff --git a/src/mainboard/tyan/s2850/mainboard.c b/src/mainboard/tyan/s2850/mainboard.c new file mode 100644 index 0000000000..11ed302083 --- /dev/null +++ b/src/mainboard/tyan/s2850/mainboard.c @@ -0,0 +1,196 @@ +#include <console/console.h> +#include <device/device.h> +#include <device/chip.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include "../../../northbridge/amd/amdk8/northbridge.h" +#include "chip.h" +//#include <part/mainboard.h> +//#include "lsi_scsi.c" +unsigned long initial_apicid[CONFIG_MAX_CPUS] = +{ + 0 +}; +#if 0 +static void fixup_lsi_53c1030(struct device *pdev) +{ +// uint8_t byte; + uint16_t word; + + byte = 1; + pci_write_config8(pdev, 0xff, byte); + // Set the device id +// pci_write_config_word(pdev, PCI_DEVICE_ID, PCI_DEVICE_ID_LSILOGIC_53C1030); + // Set the subsytem vendor id +// pci_write_config16(pdev, PCI_SUBSYSTEM_VENDOR_ID, PCI_VENDOR_ID_TYAN); + word = 0x10f1; + pci_write_config16(pdev, PCI_SUBSYSTEM_VENDOR_ID, word); + // Set the subsytem id + word = 0x2880; + pci_write_config16(pdev, PCI_SUBSYSTEM_ID, word); + // Disable writes to the device id + byte = 0; + pci_write_config8(pdev, 0xff, byte); + +// lsi_scsi_init(pdev); + +} +#endif +//extern static void lsi_scsi_init(struct device *dev); +#if 1 +static void print_pci_regs(struct device *dev) +{ + uint8_t byte; + int i; + + for(i=0;i<256;i++) { + byte = pci_read_config8(dev, i); + + if((i%16)==0) printk_debug("\n%02x:",i); + printk_debug(" %02x",byte); + } + printk_debug("\n"); + +// pci_write_config8(dev, 0x4, byte); + +} +#endif +#if 0 +static void print_mem(void) +{ + int i; + int low_1MB = 0; + for(i=low_1MB;i<low_1MB+1024*4;i++) { + if((i%16)==0) printk_debug("\n %08x:",i); + printk_debug(" %02x ",(unsigned char)*((unsigned char *)i)); + } + + for(i=low_1MB;i<low_1MB+1024*4;i++) { + if((i%16)==0) printk_debug("\n %08x:",i); + printk_debug(" %c ",(unsigned char)*((unsigned char *)i)); + } + } +#endif +#if 0 +static void amd8111_enable_rom(void) +{ + uint8_t byte; + struct device *dev; + + /* Enable 4MB rom access at 0xFFC00000 - 0xFFFFFFFF */ + /* Locate the amd8111 */ + dev = dev_find_device(0x1022, 0x7468, 0); + + /* Set the 4MB enable bit bit */ + byte = pci_read_config8(dev, 0x43); + byte |= 0x80; + pci_write_config8(dev, 0x43, byte); +} +#endif +static void onboard_scsi_fixup(void) +{ + struct device *dev; +#if 0 + unsigned char i,j,k; + + for(i=0;i<=6;i++) { + for(j=0;j<=0x1f;j++) { + for (k=0;k<=6;k++){ + dev = dev_find_slot(i, PCI_DEVFN(j, k)); + if (dev) { + printk_debug("%02x:%02x:%02x",i,j,k); + print_pci_regs(dev); + } + } + } + } +#endif + + +#if 0 + dev = dev_find_device(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1030,0); + if(!dev) { + printk_info("LSI_SCSI_FW_FIXUP: No Device Found!"); + return; + } + + lsi_scsi_init(dev); +#endif +// print_mem(); +// amd8111_enable_rom(); +} +#if 1 +static void vga_fixup(void) { + // we do this right here because: + // - all the hardware is working, and some VGA bioses seem to need + // that + // - we need page 0 below for linuxbios tables. +#if CONFIG_REALMODE_IDT == 1 + printk_debug("INSTALL REAL-MODE IDT\n"); + setup_realmode_idt(); +#endif +#if CONFIG_VGABIOS == 1 + printk_debug("DO THE VGA BIOS\n"); + do_vgabios(); + post_code(0x93); +#endif + +} +#endif + +static void +enable(struct chip *chip, enum chip_pass pass) +{ + + struct mainboard_tyan_s2850_config *conf = + (struct mainboard_tyan_s2850_config *)chip->chip_info; + + switch (pass) { + default: break; +// case CONF_PASS_PRE_CONSOLE: +// case CONF_PASS_PRE_PCI: +// case CONF_PASS_POST_PCI: + case CONF_PASS_PRE_BOOT: + if (conf->fixup_scsi) + onboard_scsi_fixup(); + if (conf->fixup_vga) + vga_fixup(); + printk_debug("mainboard fixup pass %d done\r\n", + pass); + break; + } + +} +void final_mainboard_fixup(void) +{ +#if 0 + enable_ide_devices(); +#endif +} +static struct device_operations mainboard_operations = { + .read_resources = root_dev_read_resources, + .set_resources = root_dev_set_resources, + .enable_resources = enable_childrens_resources, + .init = 0, + .scan_bus = amdk8_scan_root_bus, + .enable = 0, +}; + +static void enumerate(struct chip *chip) +{ + struct chip *child; + dev_root.ops = &mainboard_operations; + chip->dev = &dev_root; + chip->bus = 0; + for(child = chip->children; child; child = child->next) { + child->bus = &dev_root.link[0]; + } +} +struct chip_control mainboard_tyan_s2850_control = { + .enable = enable, + .enumerate = enumerate, + .name = "Tyan s2850 mainboard ", +}; + + diff --git a/src/mainboard/tyan/s2850/mptable.c b/src/mainboard/tyan/s2850/mptable.c new file mode 100644 index 0000000000..77cf102904 --- /dev/null +++ b/src/mainboard/tyan/s2850/mptable.c @@ -0,0 +1,84 @@ +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> + +void *smp_write_config_table(void *v, unsigned long * processor_map) +{ + static const char sig[4] = "PCMP"; + static const char oem[8] = "TYAN "; + static const char productid[12] = "S2850 "; + struct mp_config_table *mc; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + memset(mc, 0, sizeof(*mc)); + + memcpy(mc->mpc_signature, sig, sizeof(sig)); + mc->mpc_length = sizeof(*mc); /* initially just the header */ + mc->mpc_spec = 0x04; + mc->mpc_checksum = 0; /* not yet computed */ + memcpy(mc->mpc_oem, oem, sizeof(oem)); + memcpy(mc->mpc_productid, productid, sizeof(productid)); + mc->mpc_oemptr = 0; + mc->mpc_oemsize = 0; + mc->mpc_entry_count = 0; /* No entries yet... */ + mc->mpc_lapic = LAPIC_ADDR; + mc->mpe_length = 0; + mc->mpe_checksum = 0; + mc->reserved = 0; + + smp_write_processors(mc, processor_map); + + +/*Bus: Bus ID Type*/ + smp_write_bus(mc, 0, "PCI "); + smp_write_bus(mc, 1, "PCI "); + smp_write_bus(mc, 2, "PCI "); + smp_write_bus(mc, 3, "ISA "); + +/*I/O APICs: APIC ID Version State Address*/ + smp_write_ioapic(mc, 1, 0x11, 0xfec00000); + +/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# +*/ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x3, 0x1, 0x1, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x3, 0x0, 0x1, 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x3, 0x3, 0x1, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x3, 0x4, 0x1, 0x4); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x3, 0x5, 0x1, 0x5); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x3, 0x6, 0x1, 0x6); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x3, 0x7, 0x1, 0x7); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x3, 0x8, 0x1, 0x8); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x3, 0xc, 0x1, 0xc); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x3, 0xd, 0x1, 0xd); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x3, 0xe, 0x1, 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x3, 0xf, 0x1, 0xf); + + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x1, (2<<2)|3, 0x1, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x3, 0x1, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x34, 0x1, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x2c, 0x1, 0x12); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x38, 0x1, 0x10); + + +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x0, 0x0, MP_APIC_ALL, 0x0); + smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x0, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); + mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); + printk_debug("Wrote the mp table end at: %p - %p\n", + mc, smp_next_mpe_entry(mc)); + return smp_next_mpe_entry(mc); +} + +unsigned long write_smp_table(unsigned long addr, unsigned long *processor_map) +{ + void *v; + v = smp_write_floating_table(addr); + return (unsigned long)smp_write_config_table(v, processor_map); +} diff --git a/src/mainboard/tyan/s2880/auto.c b/src/mainboard/tyan/s2880/auto.c index d9c1f1cb9b..2d3f1fb3ae 100644 --- a/src/mainboard/tyan/s2880/auto.c +++ b/src/mainboard/tyan/s2880/auto.c @@ -158,8 +158,8 @@ static void main(void) .f1 = PCI_DEV(0, 0x19, 1), .f2 = PCI_DEV(0, 0x19, 2), .f3 = PCI_DEV(0, 0x19, 3), - .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, - .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, + .channel0 = { (0xa<<3)|4, 0, 0, 0 }, + .channel1 = { (0xa<<3)|5, 0, 0, 0 }, }, #endif }; @@ -169,7 +169,7 @@ static void main(void) enable_lapic(); init_timer(); if (!boot_cpu() ) { - notify_bsp_ap_is_stopped(); +// notify_bsp_ap_is_stopped(); stop_this_cpu(); } uart_init(); diff --git a/src/mainboard/tyan/s2881/Config.lb b/src/mainboard/tyan/s2881/Config.lb new file mode 100644 index 0000000000..ed27ecc7fa --- /dev/null +++ b/src/mainboard/tyan/s2881/Config.lb @@ -0,0 +1,195 @@ +uses HAVE_MP_TABLE +uses HAVE_PIRQ_TABLE +uses USE_FALLBACK_IMAGE +uses MAINBOARD +uses ARCH +# +# +### +### Set all of the defaults for an x86 architecture +### +# +# +### +### Build the objects we have code for in this directory. +### +##object mainboard.o +config chip.h +register "fixup_scsi" = "1" +register "fixup_vga" = "1" + + +driver mainboard.o +driver adaptec_scsi.o +driver si_sata.o +driver intel_nic.o +object reset.o +if HAVE_MP_TABLE object mptable.o end +if HAVE_PIRQ_TABLE object irq_tables.o end +# +arch i386 end +#cpu k8 end +# +### +### Build our 16 bit and 32 bit linuxBIOS entry code +### +mainboardinit cpu/i386/entry16.inc +mainboardinit cpu/i386/entry32.inc +ldscript /cpu/i386/entry16.lds +ldscript /cpu/i386/entry32.lds +# +### +### Build our reset vector (This is where linuxBIOS is entered) +### +if USE_FALLBACK_IMAGE + mainboardinit cpu/i386/reset16.inc + ldscript /cpu/i386/reset16.lds +else + mainboardinit cpu/i386/reset32.inc + ldscript /cpu/i386/reset32.lds +end +# +#### Should this be in the northbridge code? +mainboardinit arch/i386/lib/cpu_reset.inc +# +### +### Include an id string (For safe flashing) +### +mainboardinit arch/i386/lib/id.inc +ldscript /arch/i386/lib/id.lds +# +#### +#### This is the early phase of linuxBIOS startup +#### Things are delicate and we test to see if we should +#### failover to another image. +#### +#option MAX_REBOOT_CNT=2 +if USE_FALLBACK_IMAGE + ldscript /arch/i386/lib/failover.lds +end +# +### +### Setup our mtrrs +### +mainboardinit cpu/k8/earlymtrr.inc +### +### Only the bootstrap cpu makes it here. +### Failover if we need to +### +# +if USE_FALLBACK_IMAGE + mainboardinit ./failover.inc +end + +# +# +### +### Setup the serial port +### +#mainboardinit superiowinbond/w83627hf/setup_serial.inc +mainboardinit pc80/serial.inc +mainboardinit arch/i386/lib/console.inc +# +#### +#### O.k. We aren't just an intermediary anymore! +#### +# +### +### When debugging disable the watchdog timer +### +##option MAXIMUM_CONSOLE_LOGLEVEL=7 +#default MAXIMUM_CONSOLE_LOGLEVEL=7 +# +#if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc end +# +### +### Romcc output +### +#makerule ./failover.E dep "$(MAINBOARD)/failover.c" act "$(CPP) -I$(TOP)/src $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failever.E" +#makerule ./failover.inc dep "./romcc ./failover.E" act "./romcc -O ./failover.E > failover.inc" +#mainboardinit .failover.inc + +makerule ./failover.E + depends "$(MAINBOARD)/failover.c" + action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E" +end + +makerule ./failover.inc + depends "./romcc ./failover.E" + action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"end + +makerule ./auto.E + depends "$(MAINBOARD)/auto.c" + action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E" +end +makerule ./auto.inc + depends "./romcc ./auto.E" + action "./romcc -O -mcpu=k8 -o auto.inc --label-prefix=auto ./auto.E" +# action "./romcc -mcpu=k8 -O ./auto.E > auto.inc" +end +mainboardinit cpu/k8/enable_mmx_sse.inc +mainboardinit ./auto.inc +mainboardinit cpu/k8/disable_mmx_sse.inc +# +### +### Include the secondary Configuration files +### +northbridge amd/amdk8 "mc0" + pci 0:18.0 + pci 0:18.0 + pci 0:18.0 + pci 0:18.1 + pci 0:18.2 + pci 0:18.3 + southbridge amd/amd8131 "amd8131" link 2 + pci 0:0.0 + pci 0:0.1 + pci 0:1.0 + pci 0:1.1 + end + southbridge amd/amd8111 "amd8111" link 2 + pci 0:0.0 + pci 0:1.0 on + pci 0:1.1 on + pci 0:1.2 on + pci 0:1.3 on + pci 0:1.5 off + pci 0:1.6 off + pci 1:0.0 on + pci 1:0.1 on + pci 1:0.2 on + pci 1:1.0 off + end +end + +northbridge amd/amdk8 "mc1" + pci 0:19.0 + pci 0:19.0 + pci 0:19.0 + pci 0:19.1 + pci 0:19.2 + pci 0:19.3 +end + + +#northbridge amd/amdk8 +#end +#southbridge amd/amd8111 "amd8111" +#end +#southbridge amd/amd8131 "amd8131" +#end +#mainboardinit archi386/smp/secondary.inc +#superio NSC/pc87360 +# register "com1" = "{1}" +# register "lpt" = "{1}" +#end +dir /pc80 +##dir /src/superio/winbond/w83627hf +#dir /bioscall +#dir /cpu/k8 +cpu k8 "cpu0" + register "up" = "{.chip = &amd8131, .ht_width=16, .ht_speed=600}" +end + +cpu k8 "cpu1" +end diff --git a/src/mainboard/tyan/s2881/VERSION b/src/mainboard/tyan/s2881/VERSION new file mode 100644 index 0000000000..cd5ac039d6 --- /dev/null +++ b/src/mainboard/tyan/s2881/VERSION @@ -0,0 +1 @@ +2.0 diff --git a/src/mainboard/tyan/s2881/auto.c b/src/mainboard/tyan/s2881/auto.c new file mode 100644 index 0000000000..fd481ccd04 --- /dev/null +++ b/src/mainboard/tyan/s2881/auto.c @@ -0,0 +1,223 @@ +#define ASSEMBLY 1 +#include <stdint.h> +#include <device/pci_def.h> +#include <cpu/p6/apic.h> +#include <arch/io.h> +#include <arch/romcc_io.h> +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" +#include "northbridge/amd/amdk8/early_ht.c" +#include "southbridge/amd/amd8111/amd8111_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/k8/apic_timer.c" +#include "lib/delay.c" +#include "cpu/p6/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "debug.c" +#include "northbridge/amd/amdk8/cpu_rev.c" + + +#define REV_B_RESET 0 +static void memreset_setup(void) +{ +#if REV_B_RESET==1 + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 +#else + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 +#endif + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ + udelay(800); +#if REV_B_RESET==1 + outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 +#endif + udelay(90); +} + +static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes) +{ + /* Routing Table Node i + * + * F0: 0x40, 0x44, 0x48, 0x4c, 0x50, 0x54, 0x58, 0x5c + * i: 0, 1, 2, 3, 4, 5, 6, 7 + * + * [ 0: 3] Request Route + * [0] Route to this node + * [1] Route to Link 0 + * [2] Route to Link 1 + * [3] Route to Link 2 + * [11: 8] Response Route + * [0] Route to this node + * [1] Route to Link 0 + * [2] Route to Link 1 + * [3] Route to Link 2 + * [19:16] Broadcast route + * [0] Route to this node + * [1] Route to Link 0 + * [2] Route to Link 1 + * [3] Route to Link 2 + */ + + uint32_t ret=0x00010101; /* default row entry */ + + static const unsigned int rows_2p[2][2] = { + { 0x00030101, 0x00010202 }, + { 0x00010202, 0x00030101 } + }; + + if(maxnodes>2) { + print_debug("this mainboard is only designed for 2 cpus\r\n"); + maxnodes=2; + } + + + if (!(node>=maxnodes || row>=maxnodes)) { + ret=rows_2p[node][row]; + } + + return ret; +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ + /* nothing to do */ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +/* include mainboard specific ht code */ +#include "hypertransport.c" + +//#include "northbridge/amd/amdk8/cpu_ldtstop.c" +//#include "southbridge/amd/amd8111/amd8111_ldtstop.c" + +#include "northbridge/amd/amdk8/raminit.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "sdram/generic_sdram.c" + +#include "resourcemap.c" /* tyan does not want the default */ + +static void enable_lapic(void) +{ + msr_t msr; + msr = rdmsr(0x1b); + msr.hi &= 0xffffff00; + msr.lo &= 0x000007ff; + msr.lo |= APIC_DEFAULT_BASE | (1 << 11); + wrmsr(0x1b, msr); +} + +static void stop_this_cpu(void) +{ + unsigned apicid; + apicid = apic_read(APIC_ID) >> 24; + + /* Send an APIC INIT to myself */ + apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid)); + apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT); + /* Wait for the ipi send to finish */ + apic_wait_icr_idle(); + + /* Deassert the APIC INIT */ + apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid)); + apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT); + /* Wait for the ipi send to finish */ + apic_wait_icr_idle(); + + /* If I haven't halted spin forever */ + for(;;) { + hlt(); + } +} +#define FIRST_CPU 1 +#define SECOND_CPU 1 +#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) +static void main(void) +{ + static const struct mem_controller cpu[] = { +#if FIRST_CPU + { + .node_id = 0, + .f0 = PCI_DEV(0, 0x18, 0), + .f1 = PCI_DEV(0, 0x18, 1), + .f2 = PCI_DEV(0, 0x18, 2), + .f3 = PCI_DEV(0, 0x18, 3), + .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, + .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, + }, +#endif +#if SECOND_CPU + { + .node_id = 1, + .f0 = PCI_DEV(0, 0x19, 0), + .f1 = PCI_DEV(0, 0x19, 1), + .f2 = PCI_DEV(0, 0x19, 2), + .f3 = PCI_DEV(0, 0x19, 3), + .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, + .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, + }, +#endif + }; + if (cpu_init_detected()) { + asm("jmp __cpu_reset"); + } + enable_lapic(); + init_timer(); + if (!boot_cpu() ) { + notify_bsp_ap_is_stopped(); + stop_this_cpu(); + } + uart_init(); + console_init(); + setup_s2881_resource_map(); + setup_coherent_ht_domain(); + enumerate_ht_chain(0); + distinguish_cpu_resets(0); + +#if 0 + print_pci_devices(); +#endif + enable_smbus(); +#if 0 + dump_spd_registers(&cpu[0]); +#endif + memreset_setup(); + sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); + +#if 0 + dump_pci_devices(); +#endif +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 1)); +#endif + + /* Check all of memory */ +#if 0 + msr_t msr; + msr = rdmsr(TOP_MEM2); + print_debug("TOP_MEM2: "); + print_debug_hex32(msr.hi); + print_debug_hex32(msr.lo); + print_debug("\r\n"); +#endif +/* +#if 0 + ram_check(0x00000000, msr.lo+(msr.hi<<32)); +#else +#if TOTAL_CPUS < 2 + // Check 16MB of memory @ 0 + ram_check(0x00000000, 0x01000000); +#else + // Check 16MB of memory @ 2GB + ram_check(0x80000000, 0x81000000); +#endif +#endif +*/ +} diff --git a/src/mainboard/tyan/s2881/chip.h b/src/mainboard/tyan/s2881/chip.h new file mode 100644 index 0000000000..5c147e5225 --- /dev/null +++ b/src/mainboard/tyan/s2881/chip.h @@ -0,0 +1,6 @@ +extern struct chip_control mainboard_tyan_s2881_control; + +struct mainboard_tyan_s2881_config { + int fixup_scsi; + int fixup_vga; +}; diff --git a/src/mainboard/tyan/s2881/cmos.layout b/src/mainboard/tyan/s2881/cmos.layout new file mode 100644 index 0000000000..5ba4c032c1 --- /dev/null +++ b/src/mainboard/tyan/s2881/cmos.layout @@ -0,0 +1,74 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +1008 16 h 0 check_sum + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM + +checksums + +checksum 392 1007 1008 + + diff --git a/src/mainboard/tyan/s2881/failover.c b/src/mainboard/tyan/s2881/failover.c new file mode 100644 index 0000000000..8eeeaef7e1 --- /dev/null +++ b/src/mainboard/tyan/s2881/failover.c @@ -0,0 +1,38 @@ +#define ASSEMBLY 1 +#include <stdint.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include "arch/romcc_io.h" +#include "pc80/mc146818rtc_early.c" +#include "southbridge/amd/amd8111/amd8111_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" +#include "cpu/p6/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" + +static void main(void) +{ + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + enumerate_ht_chain(0); + + /* Setup the 8111 */ + amd8111_enable_rom(); + + /* Is this a cpu reset? */ + if (cpu_init_detected()) { + if (last_boot_normal()) { + asm("jmp __normal_image"); + } else { + asm("jmp __cpu_reset"); + } + } + /* Is this a secondary cpu? */ + else if (!boot_cpu() && last_boot_normal()) { + asm("jmp __normal_image"); + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + asm("jmp __normal_image"); + } +} diff --git a/src/mainboard/tyan/s2881/irq_tables.c b/src/mainboard/tyan/s2881/irq_tables.c new file mode 100644 index 0000000000..1dd342f373 --- /dev/null +++ b/src/mainboard/tyan/s2881/irq_tables.c @@ -0,0 +1,33 @@ +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ + +#include <arch/pirq_routing.h> + +const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*9, /* there can be total 9 devices on the bus */ + 1, /* Where the interrupt router lies (bus) */ + (4<<3)|3, /* Where the interrupt router lies (dev) */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x1022, /* Vendor */ + 0x746b, /* Device */ + 0, /* Crap (miniport) */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x3d, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ + { + {1,(4<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, + {0x4,0, {{0, 0}, {0, 0}, {0, 0}, {0x4, 0xdef8}}, 0, 0}, + {0x3,0x18, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x1, 0}, + {0x2,0x38, {{0x3, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, + {0x2,0x40, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x4, 0}, + {0x4,0x30, {{0x3, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, + {0x2,0x48, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}, {0, 0}}, 0, 0}, + {0x2,0x50, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}, {0, 0}}, 0, 0}, + {0x4,0x28, {{0x2, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, + } +}; diff --git a/src/mainboard/tyan/s2881/mainboard.c b/src/mainboard/tyan/s2881/mainboard.c new file mode 100644 index 0000000000..aa99f64894 --- /dev/null +++ b/src/mainboard/tyan/s2881/mainboard.c @@ -0,0 +1,196 @@ +#include <console/console.h> +#include <device/device.h> +#include <device/chip.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include "../../../northbridge/amd/amdk8/northbridge.h" +#include "chip.h" +//#include <part/mainboard.h> +//#include "lsi_scsi.c" +unsigned long initial_apicid[CONFIG_MAX_CPUS] = +{ + 0,1 +}; +#if 0 +static void fixup_lsi_53c1030(struct device *pdev) +{ +// uint8_t byte; + uint16_t word; + + byte = 1; + pci_write_config8(pdev, 0xff, byte); + // Set the device id +// pci_write_config_word(pdev, PCI_DEVICE_ID, PCI_DEVICE_ID_LSILOGIC_53C1030); + // Set the subsytem vendor id +// pci_write_config16(pdev, PCI_SUBSYSTEM_VENDOR_ID, PCI_VENDOR_ID_TYAN); + word = 0x10f1; + pci_write_config16(pdev, PCI_SUBSYSTEM_VENDOR_ID, word); + // Set the subsytem id + word = 0x2881; + pci_write_config16(pdev, PCI_SUBSYSTEM_ID, word); + // Disable writes to the device id + byte = 0; + pci_write_config8(pdev, 0xff, byte); + +// lsi_scsi_init(pdev); + +} +#endif +//extern static void lsi_scsi_init(struct device *dev); +#if 1 +static void print_pci_regs(struct device *dev) +{ + uint8_t byte; + int i; + + for(i=0;i<256;i++) { + byte = pci_read_config8(dev, i); + + if((i%16)==0) printk_debug("\n%02x:",i); + printk_debug(" %02x",byte); + } + printk_debug("\n"); + +// pci_write_config8(dev, 0x4, byte); + +} +#endif +#if 0 +static void print_mem(void) +{ + int i; + int low_1MB = 0; + for(i=low_1MB;i<low_1MB+1024*4;i++) { + if((i%16)==0) printk_debug("\n %08x:",i); + printk_debug(" %02x ",(unsigned char)*((unsigned char *)i)); + } + + for(i=low_1MB;i<low_1MB+1024*4;i++) { + if((i%16)==0) printk_debug("\n %08x:",i); + printk_debug(" %c ",(unsigned char)*((unsigned char *)i)); + } + } +#endif +#if 0 +static void amd8111_enable_rom(void) +{ + uint8_t byte; + struct device *dev; + + /* Enable 4MB rom access at 0xFFC00000 - 0xFFFFFFFF */ + /* Locate the amd8111 */ + dev = dev_find_device(0x1022, 0x7468, 0); + + /* Set the 4MB enable bit bit */ + byte = pci_read_config8(dev, 0x43); + byte |= 0x80; + pci_write_config8(dev, 0x43, byte); +} +#endif +static void onboard_scsi_fixup(void) +{ + struct device *dev; +#if 0 + unsigned char i,j,k; + + for(i=0;i<=6;i++) { + for(j=0;j<=0x1f;j++) { + for (k=0;k<=6;k++){ + dev = dev_find_slot(i, PCI_DEVFN(j, k)); + if (dev) { + printk_debug("%02x:%02x:%02x",i,j,k); + print_pci_regs(dev); + } + } + } + } +#endif + + +#if 0 + dev = dev_find_device(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1030,0); + if(!dev) { + printk_info("LSI_SCSI_FW_FIXUP: No Device Found!"); + return; + } + + lsi_scsi_init(dev); +#endif +// print_mem(); +// amd8111_enable_rom(); +} +#if 1 +static void vga_fixup(void) { + // we do this right here because: + // - all the hardware is working, and some VGA bioses seem to need + // that + // - we need page 0 below for linuxbios tables. +#if CONFIG_REALMODE_IDT == 1 + printk_debug("INSTALL REAL-MODE IDT\n"); + setup_realmode_idt(); +#endif +#if CONFIG_VGABIOS == 1 + printk_debug("DO THE VGA BIOS\n"); + do_vgabios(); + post_code(0x93); +#endif + +} +#endif + +static void +enable(struct chip *chip, enum chip_pass pass) +{ + + struct mainboard_tyan_s2881_config *conf = + (struct mainboard_tyan_s2881_config *)chip->chip_info; + + switch (pass) { + default: break; +// case CONF_PASS_PRE_CONSOLE: +// case CONF_PASS_PRE_PCI: +// case CONF_PASS_POST_PCI: + case CONF_PASS_PRE_BOOT: + if (conf->fixup_scsi) + onboard_scsi_fixup(); + if (conf->fixup_vga) + vga_fixup(); + printk_debug("mainboard fixup pass %d done\r\n", + pass); + break; + } + +} +void final_mainboard_fixup(void) +{ +#if 0 + enable_ide_devices(); +#endif +} +static struct device_operations mainboard_operations = { + .read_resources = root_dev_read_resources, + .set_resources = root_dev_set_resources, + .enable_resources = enable_childrens_resources, + .init = 0, + .scan_bus = amdk8_scan_root_bus, + .enable = 0, +}; + +static void enumerate(struct chip *chip) +{ + struct chip *child; + dev_root.ops = &mainboard_operations; + chip->dev = &dev_root; + chip->bus = 0; + for(child = chip->children; child; child = child->next) { + child->bus = &dev_root.link[0]; + } +} +struct chip_control mainboard_tyan_s2881_control = { + .enable = enable, + .enumerate = enumerate, + .name = "Tyan s2881 mainboard ", +}; + + diff --git a/src/mainboard/tyan/s2881/mptable.c b/src/mainboard/tyan/s2881/mptable.c new file mode 100644 index 0000000000..cb1dfc8f2d --- /dev/null +++ b/src/mainboard/tyan/s2881/mptable.c @@ -0,0 +1,171 @@ +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> + +void *smp_write_config_table(void *v, unsigned long * processor_map) +{ + static const char sig[4] = "PCMP"; + static const char oem[8] = "TYAN "; + static const char productid[12] = "S2881 "; + struct mp_config_table *mc; + + unsigned char bus_num; + unsigned char bus_isa; + unsigned char bus_8131_1; + unsigned char bus_8131_2; + unsigned char bus_8111_1; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + memset(mc, 0, sizeof(*mc)); + + memcpy(mc->mpc_signature, sig, sizeof(sig)); + mc->mpc_length = sizeof(*mc); /* initially just the header */ + mc->mpc_spec = 0x04; + mc->mpc_checksum = 0; /* not yet computed */ + memcpy(mc->mpc_oem, oem, sizeof(oem)); + memcpy(mc->mpc_productid, productid, sizeof(productid)); + mc->mpc_oemptr = 0; + mc->mpc_oemsize = 0; + mc->mpc_entry_count = 0; /* No entries yet... */ + mc->mpc_lapic = LAPIC_ADDR; + mc->mpe_length = 0; + mc->mpe_checksum = 0; + mc->reserved = 0; + + smp_write_processors(mc, processor_map); + + + { + device_t dev; + + /* 8111 */ + dev = dev_find_slot(1, PCI_DEVFN(0x03,0)); + if (dev) { + bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + } + else { + printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); + + bus_8111_1 = 4; + bus_isa = 5; + } + /* 8131-1 */ + dev = dev_find_slot(1, PCI_DEVFN(0x01,0)); + if (dev) { + bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + + } + else { + printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n"); + + bus_8131_1 = 2; + } + /* 8131-2 */ + dev = dev_find_slot(1, PCI_DEVFN(0x02,0)); + if (dev) { + bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + + } + else { + printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + + bus_8131_2 = 3; + } + } + +/*Bus: Bus ID Type*/ + /* define bus and isa numbers */ + for(bus_num = 0; bus_num < bus_isa; bus_num++) { + smp_write_bus(mc, bus_num, "PCI "); + } + smp_write_bus(mc, bus_isa, "ISA "); + + +/*I/O APICs: APIC ID Version State Address*/ + smp_write_ioapic(mc, 2, 0x11, 0xfec00000); + { + struct pci_dev *dev; + uint32_t base; + dev = dev_find_slot(1, PCI_DEVFN(0x1,1)); + if (dev) { + base = pci_read_config32(dev, PCI_BASE_ADDRESS_0); + base &= PCI_BASE_ADDRESS_MEM_MASK; + smp_write_ioapic(mc, 3, 0x11, base); + } + dev = dev_find_slot(1, PCI_DEVFN(0x2,1)); + if (dev) { + base = pci_read_config32(dev, PCI_BASE_ADDRESS_0); + base &= PCI_BASE_ADDRESS_MEM_MASK; + smp_write_ioapic(mc, 4, 0x11, base); + } + } + +/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# +*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, 0x2, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, 0x2, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, 0x2, 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x3, 0x2, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x4, 0x2, 0x4); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x6, 0x2, 0x6); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x7, 0x2, 0x7); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x8, 0x2, 0x8); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xc, 0x2, 0xc); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, 0x2, 0xd); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, 0x2, 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, 0x2, 0xf); + +//8111 LPC ???? + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 1, (4<<2)|0, 0x2, 0x13); + +//On Board AMD USB ??? + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, 0x2, 0x13); + +//On Board ATI Display Adapter + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (6<<2)|0, 0x2, 0x12); + +//On Board SI Serial ATA + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (5<<2)|0, 0x2, 0x11); + +//Slot 3 PCIX 100/66 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|0, 0x3, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|1, 0x3, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|2, 0x3, 0x1);// + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|3, 0x3, 0x2);// + + +//On Board NIC and LSI scsi + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|0, 0x3, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|1, 0x3, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (0xa<<2)|0, 0x3, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (0xa<<2)|1, 0x3, 0x1); + +//Slot 1 PCI-X 133/100/66 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|0, 0x4, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|1, 0x4, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|2, 0x4, 0x2); // + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|3, 0x4, 0x3); // + + +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0); + smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); + mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); + printk_debug("Wrote the mp table end at: %p - %p\n", + mc, smp_next_mpe_entry(mc)); + return smp_next_mpe_entry(mc); +} + +unsigned long write_smp_table(unsigned long addr, unsigned long *processor_map) +{ + void *v; + v = smp_write_floating_table(addr); + return (unsigned long)smp_write_config_table(v, processor_map); +} diff --git a/src/mainboard/tyan/s2881/resourcemap.c b/src/mainboard/tyan/s2881/resourcemap.c new file mode 100644 index 0000000000..7119c4a557 --- /dev/null +++ b/src/mainboard/tyan/s2881/resourcemap.c @@ -0,0 +1,264 @@ +/* + * Tyan S2881 needs a different resource map + * + */ + +static void setup_s2881_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff20, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ + PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000203, + PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + }; + int max; + max = sizeof(register_values)/sizeof(register_values[0]); + setup_resource_map(register_values, max); +} + diff --git a/src/mainboard/tyan/s2882/mptable.c b/src/mainboard/tyan/s2882/mptable.c index 6f1ce50602..74739c05a7 100644 --- a/src/mainboard/tyan/s2882/mptable.c +++ b/src/mainboard/tyan/s2882/mptable.c @@ -71,7 +71,7 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x5, 0xe, 0x2, 0xe); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x5, 0xf, 0x2, 0xf); -//??? smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x1f, 0x2, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x1, (4<<2)|3, 0x2, 0x13); //On Board AMD USB diff --git a/src/mainboard/tyan/s4880/Config.lb b/src/mainboard/tyan/s4880/Config.lb index 48e2678c51..ccc4784935 100644 --- a/src/mainboard/tyan/s4880/Config.lb +++ b/src/mainboard/tyan/s4880/Config.lb @@ -15,7 +15,7 @@ uses ARCH ### ##object mainboard.o config chip.h -#register "fixup_scsi" = "1" +register "fixup_scsi" = "1" #register "fixup_vga" = "1" @@ -125,7 +125,7 @@ makerule ./auto.E end makerule ./auto.inc depends "./romcc ./auto.E" - action "./romcc -O -mcpu=k8 -o auto.inc --label-prefix=auto ./auto.E" + action "./romcc -O2 -mcpu=k8 -o auto.inc --label-prefix=auto ./auto.E" # action "./romcc -mcpu=k8 -O ./auto.E > auto.inc" end mainboardinit cpu/k8/enable_mmx_sse.inc diff --git a/src/mainboard/tyan/s4880/chip.h b/src/mainboard/tyan/s4880/chip.h index 47fdee86d1..807474992a 100644 --- a/src/mainboard/tyan/s4880/chip.h +++ b/src/mainboard/tyan/s4880/chip.h @@ -1,6 +1,6 @@ extern struct chip_control mainboard_tyan_s4880_control; struct mainboard_tyan_s4880_config { -// int fixup_scsi; + int fixup_scsi; // int fixup_vga; }; diff --git a/src/mainboard/tyan/s4880/mainboard.c b/src/mainboard/tyan/s4880/mainboard.c index 2431595f19..2ed9eb9c2f 100644 --- a/src/mainboard/tyan/s4880/mainboard.c +++ b/src/mainboard/tyan/s4880/mainboard.c @@ -38,7 +38,7 @@ static void fixup_lsi_53c1030(struct device *pdev) } #endif //extern static void lsi_scsi_init(struct device *dev); -#if 0 +#if 1 static void print_pci_regs(struct device *dev) { uint8_t byte; @@ -88,11 +88,11 @@ static void amd8111_enable_rom(void) pci_write_config8(dev, 0x43, byte); } #endif -#if 0 +#if 1 static void onboard_scsi_fixup(void) { struct device *dev; -#if 0 +#if 1 unsigned char i,j,k; for(i=0;i<=6;i++) { @@ -154,8 +154,8 @@ enable(struct chip *chip, enum chip_pass pass) // case CONF_PASS_PRE_PCI: // case CONF_PASS_POST_PCI: case CONF_PASS_PRE_BOOT: -// if (conf->fixup_scsi) -// onboard_scsi_fixup(); + if (conf->fixup_scsi) + onboard_scsi_fixup(); // if (conf->fixup_vga) // vga_fixup(); printk_debug("mainboard fixup pass %d done\r\n", |