diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/soc/intel/alderlake/include/soc/smbus.h | 33 | ||||
| -rw-r--r-- | src/soc/intel/cannonlake/include/soc/smbus.h | 25 | ||||
| -rw-r--r-- | src/soc/intel/common/pch/include/intelpch/smbus.h | 27 | ||||
| -rw-r--r-- | src/soc/intel/elkhartlake/include/soc/smbus.h | 27 | ||||
| -rw-r--r-- | src/soc/intel/icelake/include/soc/smbus.h | 25 | ||||
| -rw-r--r-- | src/soc/intel/jasperlake/include/soc/smbus.h | 27 | ||||
| -rw-r--r-- | src/soc/intel/skylake/include/soc/smbus.h | 21 | ||||
| -rw-r--r-- | src/soc/intel/tigerlake/include/soc/smbus.h | 33 |
8 files changed, 46 insertions, 172 deletions
diff --git a/src/soc/intel/alderlake/include/soc/smbus.h b/src/soc/intel/alderlake/include/soc/smbus.h index ab4994aa37..c865fbe94e 100644 --- a/src/soc/intel/alderlake/include/soc/smbus.h +++ b/src/soc/intel/alderlake/include/soc/smbus.h @@ -1,35 +1,8 @@ /* SPDX-License-Identifier: GPL-2.0-only */ -/* - * This file is created based on Intel Alder Lake Processor PCH Datasheet - * Document number: 621483 - * Chapter number: 6 - */ +#ifndef _SOC_SMBUS_H_ +#define _SOC_SMBUS_H_ -#ifndef _SOC_ALDERLAKE_SMBUS_H_ -#define _SOC_ALDERLAKE_SMBUS_H_ - -/* IO and MMIO registers under primary BAR */ - -/* TCO registers and fields live behind TCOBASE I/O bar in SMBus device. */ -#define TCO1_STS 0x04 -#define TCO_TIMEOUT (1 << 3) -#define TCO2_STS 0x06 -#define TCO_STS_SECOND_TO (1 << 1) -#define TCO_INTRD_DET (1 << 0) -#define TCO1_CNT 0x08 -#define TCO_LOCK (1 << 12) -#define TCO_TMR_HLT (1 << 11) -#define TCO2_CNT 0x0A -#define TCO_INTRD_SEL_MASK (3 << 1) -#define TCO_INTRD_SEL_SMI (1 << 2) -#define TCO_INTRD_SEL_INT (1 << 1) - -/* - * Default slave address value for PCH. This value is set to match default - * value set by hardware. It is useful since PCH is able to respond even - * before CPU is up. This is reset by RSMRST# but not by PLTRST#. - */ -#define SMBUS_SLAVE_ADDR 0x44 +#include <intelpch/smbus.h> #endif diff --git a/src/soc/intel/cannonlake/include/soc/smbus.h b/src/soc/intel/cannonlake/include/soc/smbus.h index c6d20a50d1..c865fbe94e 100644 --- a/src/soc/intel/cannonlake/include/soc/smbus.h +++ b/src/soc/intel/cannonlake/include/soc/smbus.h @@ -1,27 +1,8 @@ /* SPDX-License-Identifier: GPL-2.0-only */ -#ifndef _SOC_CANNONLAKE_SMBUS_H_ -#define _SOC_CANNONLAKE_SMBUS_H_ +#ifndef _SOC_SMBUS_H_ +#define _SOC_SMBUS_H_ -/* TCO registers and fields live behind TCOBASE I/O bar in SMBus device. */ -#define TCO1_STS 0x04 -#define TCO_TIMEOUT (1 << 3) -#define TCO2_STS 0x06 -#define TCO_STS_SECOND_TO (1 << 1) -#define TCO_INTRD_DET (1 << 0) -#define TCO1_CNT 0x08 -#define TCO_LOCK (1 << 12) -#define TCO_TMR_HLT (1 << 11) -#define TCO2_CNT 0x0A -#define TCO_INTRD_SEL_MASK (3 << 1) -#define TCO_INTRD_SEL_SMI (1 << 2) -#define TCO_INTRD_SEL_INT (1 << 1) - -/* - * Default slave address value for PCH. This value is set to match default - * value set by hardware. It is useful since PCH is able to respond even - * before CPU is up. This is reset by RSMRST# but not by PLTRST#. - */ -#define SMBUS_SLAVE_ADDR 0x44 +#include <intelpch/smbus.h> #endif diff --git a/src/soc/intel/common/pch/include/intelpch/smbus.h b/src/soc/intel/common/pch/include/intelpch/smbus.h new file mode 100644 index 0000000000..238da2b73b --- /dev/null +++ b/src/soc/intel/common/pch/include/intelpch/smbus.h @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef _INTELPCH_SMBUS_H_ +#define _INTELPCH_SMBUS_H_ + +/* TCO registers and fields live behind TCOBASE I/O bar in SMBus device. */ +#define TCO1_STS 0x04 +#define TCO_TIMEOUT (1 << 3) +#define TCO2_STS 0x06 +#define TCO_STS_SECOND_TO (1 << 1) +#define TCO_INTRD_DET (1 << 0) +#define TCO1_CNT 0x08 +#define TCO_LOCK (1 << 12) +#define TCO_TMR_HLT (1 << 11) +#define TCO2_CNT 0x0A +#define TCO_INTRD_SEL_MASK (3 << 1) +#define TCO_INTRD_SEL_SMI (1 << 2) +#define TCO_INTRD_SEL_INT (1 << 1) + +/* + * Default slave address value for PCH. This value is set to match default + * value set by hardware. It is useful since PCH is able to respond even + * before CPU is up. This is reset by RSMRST# but not by PLTRST#. + */ +#define SMBUS_SLAVE_ADDR 0x44 + +#endif diff --git a/src/soc/intel/elkhartlake/include/soc/smbus.h b/src/soc/intel/elkhartlake/include/soc/smbus.h index 0ea469c8c9..c865fbe94e 100644 --- a/src/soc/intel/elkhartlake/include/soc/smbus.h +++ b/src/soc/intel/elkhartlake/include/soc/smbus.h @@ -1,29 +1,8 @@ /* SPDX-License-Identifier: GPL-2.0-only */ -#ifndef _SOC_ELKHARTLAKE_SMBUS_H_ -#define _SOC_ELKHARTLAKE_SMBUS_H_ +#ifndef _SOC_SMBUS_H_ +#define _SOC_SMBUS_H_ -/* IO and MMIO registers under primary BAR */ - -/* TCO registers and fields live behind TCOBASE I/O bar in SMBus device. */ -#define TCO1_STS 0x04 -#define TCO_TIMEOUT (1 << 3) -#define TCO2_STS 0x06 -#define TCO_STS_SECOND_TO (1 << 1) -#define TCO_INTRD_DET (1 << 0) -#define TCO1_CNT 0x08 -#define TCO_LOCK (1 << 12) -#define TCO_TMR_HLT (1 << 11) -#define TCO2_CNT 0x0A -#define TCO_INTRD_SEL_MASK (3 << 1) -#define TCO_INTRD_SEL_SMI (1 << 2) -#define TCO_INTRD_SEL_INT (1 << 1) - -/* - * Default slave address value for PCH. This value is set to match default - * value set by hardware. It is useful since PCH is able to respond even - * before CPU is up. This is reset by RSMRST# but not by PLTRST#. - */ -#define SMBUS_SLAVE_ADDR 0x44 +#include <intelpch/smbus.h> #endif diff --git a/src/soc/intel/icelake/include/soc/smbus.h b/src/soc/intel/icelake/include/soc/smbus.h index c8503d5bce..c865fbe94e 100644 --- a/src/soc/intel/icelake/include/soc/smbus.h +++ b/src/soc/intel/icelake/include/soc/smbus.h @@ -1,27 +1,8 @@ /* SPDX-License-Identifier: GPL-2.0-only */ -#ifndef _SOC_ICELAKE_SMBUS_H_ -#define _SOC_ICELAKE_SMBUS_H_ +#ifndef _SOC_SMBUS_H_ +#define _SOC_SMBUS_H_ -/* TCO registers and fields live behind TCOBASE I/O bar in SMBus device. */ -#define TCO1_STS 0x04 -#define TCO_TIMEOUT (1 << 3) -#define TCO2_STS 0x06 -#define TCO_STS_SECOND_TO (1 << 1) -#define TCO_INTRD_DET (1 << 0) -#define TCO1_CNT 0x08 -#define TCO_LOCK (1 << 12) -#define TCO_TMR_HLT (1 << 11) -#define TCO2_CNT 0x0A -#define TCO_INTRD_SEL_MASK (3 << 1) -#define TCO_INTRD_SEL_SMI (1 << 2) -#define TCO_INTRD_SEL_INT (1 << 1) - -/* - * Default slave address value for PCH. This value is set to match default - * value set by hardware. It is useful since PCH is able to respond even - * before CPU is up. This is reset by RSMRST# but not by PLTRST#. - */ -#define SMBUS_SLAVE_ADDR 0x44 +#include <intelpch/smbus.h> #endif diff --git a/src/soc/intel/jasperlake/include/soc/smbus.h b/src/soc/intel/jasperlake/include/soc/smbus.h index 7a3a890b1d..c865fbe94e 100644 --- a/src/soc/intel/jasperlake/include/soc/smbus.h +++ b/src/soc/intel/jasperlake/include/soc/smbus.h @@ -1,29 +1,8 @@ /* SPDX-License-Identifier: GPL-2.0-only */ -#ifndef _SOC_JASPERLAKE_SMBUS_H_ -#define _SOC_JASPERLAKE_SMBUS_H_ +#ifndef _SOC_SMBUS_H_ +#define _SOC_SMBUS_H_ -/* IO and MMIO registers under primary BAR */ - -/* TCO registers and fields live behind TCOBASE I/O bar in SMBus device. */ -#define TCO1_STS 0x04 -#define TCO_TIMEOUT (1 << 3) -#define TCO2_STS 0x06 -#define TCO_STS_SECOND_TO (1 << 1) -#define TCO_INTRD_DET (1 << 0) -#define TCO1_CNT 0x08 -#define TCO_LOCK (1 << 12) -#define TCO_TMR_HLT (1 << 11) -#define TCO2_CNT 0x0A -#define TCO_INTRD_SEL_MASK (3 << 1) -#define TCO_INTRD_SEL_SMI (1 << 2) -#define TCO_INTRD_SEL_INT (1 << 1) - -/* - * Default slave address value for PCH. This value is set to match default - * value set by hardware. It is useful since PCH is able to respond even - * before CPU is up. This is reset by RSMRST# but not by PLTRST#. - */ -#define SMBUS_SLAVE_ADDR 0x44 +#include <intelpch/smbus.h> #endif diff --git a/src/soc/intel/skylake/include/soc/smbus.h b/src/soc/intel/skylake/include/soc/smbus.h index bd86aca20a..c865fbe94e 100644 --- a/src/soc/intel/skylake/include/soc/smbus.h +++ b/src/soc/intel/skylake/include/soc/smbus.h @@ -3,25 +3,6 @@ #ifndef _SOC_SMBUS_H_ #define _SOC_SMBUS_H_ -/* TCO registers and fields live behind TCOBASE I/O bar in SMBus device. */ -#define TCO1_STS 0x04 -#define TCO_TIMEOUT (1 << 3) -#define TCO2_STS 0x06 -#define TCO_STS_SECOND_TO (1 << 1) -#define TCO_INTRD_DET (1 << 0) -#define TCO1_CNT 0x08 -#define TCO_LOCK (1 << 12) -#define TCO_TMR_HLT (1 << 11) -#define TCO2_CNT 0x0A -#define TCO_INTRD_SEL_MASK (3 << 1) -#define TCO_INTRD_SEL_SMI (1 << 2) -#define TCO_INTRD_SEL_INT (1 << 1) - -/* - * Default slave address value for PCH. This value is set to match default - * value set by hardware. It is useful since PCH is able to respond even - * before CPU is up. This is reset by RSMRST# but not by PLTRST#. - */ -#define SMBUS_SLAVE_ADDR 0x44 +#include <intelpch/smbus.h> #endif diff --git a/src/soc/intel/tigerlake/include/soc/smbus.h b/src/soc/intel/tigerlake/include/soc/smbus.h index 71c4d6a03b..c865fbe94e 100644 --- a/src/soc/intel/tigerlake/include/soc/smbus.h +++ b/src/soc/intel/tigerlake/include/soc/smbus.h @@ -1,35 +1,8 @@ /* SPDX-License-Identifier: GPL-2.0-only */ -/* - * This file is created based on Intel Tiger Lake Processor PCH Datasheet - * Document number: 575857 - * Chapter number: 6 - */ +#ifndef _SOC_SMBUS_H_ +#define _SOC_SMBUS_H_ -#ifndef _SOC_TIGERLAKE_SMBUS_H_ -#define _SOC_TIGERLAKE_SMBUS_H_ - -/* IO and MMIO registers under primary BAR */ - -/* TCO registers and fields live behind TCOBASE I/O bar in SMBus device. */ -#define TCO1_STS 0x04 -#define TCO_TIMEOUT (1 << 3) -#define TCO2_STS 0x06 -#define TCO_STS_SECOND_TO (1 << 1) -#define TCO_INTRD_DET (1 << 0) -#define TCO1_CNT 0x08 -#define TCO_LOCK (1 << 12) -#define TCO_TMR_HLT (1 << 11) -#define TCO2_CNT 0x0A -#define TCO_INTRD_SEL_MASK (3 << 1) -#define TCO_INTRD_SEL_SMI (1 << 2) -#define TCO_INTRD_SEL_INT (1 << 1) - -/* - * Default slave address value for PCH. This value is set to match default - * value set by hardware. It is useful since PCH is able to respond even - * before CPU is up. This is reset by RSMRST# but not by PLTRST#. - */ -#define SMBUS_SLAVE_ADDR 0x44 +#include <intelpch/smbus.h> #endif |