diff options
Diffstat (limited to 'src')
39 files changed, 4039 insertions, 1 deletions
diff --git a/src/ec/Kconfig b/src/ec/Kconfig index 0233bd9726..7095310a9c 100644 --- a/src/ec/Kconfig +++ b/src/ec/Kconfig @@ -2,3 +2,4 @@ source src/ec/acpi/Kconfig source src/ec/compal/Kconfig source src/ec/lenovo/Kconfig source src/ec/smsc/Kconfig +source src/ec/quanta/Kconfig diff --git a/src/ec/Makefile.inc b/src/ec/Makefile.inc index 0ddba7984a..9bade5f285 100644 --- a/src/ec/Makefile.inc +++ b/src/ec/Makefile.inc @@ -1,2 +1,2 @@ subdirs-$(CONFIG_EC_ACPI) += acpi -subdirs-y += compal lenovo smsc +subdirs-y += compal lenovo smsc quanta diff --git a/src/ec/quanta/Kconfig b/src/ec/quanta/Kconfig new file mode 100644 index 0000000000..f29ec00b83 --- /dev/null +++ b/src/ec/quanta/Kconfig @@ -0,0 +1 @@ +source src/ec/quanta/ene_kb3940q/Kconfig diff --git a/src/ec/quanta/Makefile.inc b/src/ec/quanta/Makefile.inc new file mode 100644 index 0000000000..1c39f22429 --- /dev/null +++ b/src/ec/quanta/Makefile.inc @@ -0,0 +1 @@ +subdirs-$(CONFIG_EC_QUANTA_ENE_KB3940Q) += ene_kb3940q diff --git a/src/ec/quanta/ene_kb3940q/Kconfig b/src/ec/quanta/ene_kb3940q/Kconfig new file mode 100644 index 0000000000..4258948d7a --- /dev/null +++ b/src/ec/quanta/ene_kb3940q/Kconfig @@ -0,0 +1,4 @@ +config EC_QUANTA_ENE_KB3940Q + bool + help + Interface to QUANTA ENE KB3940Q Embedded Controller. diff --git a/src/ec/quanta/ene_kb3940q/Makefile.inc b/src/ec/quanta/ene_kb3940q/Makefile.inc new file mode 100644 index 0000000000..1ce9a46f88 --- /dev/null +++ b/src/ec/quanta/ene_kb3940q/Makefile.inc @@ -0,0 +1,4 @@ +ramstage-y += ec.c +smm-y += ec.c + +smm-y += ../../../lib/delay.c diff --git a/src/ec/quanta/ene_kb3940q/acpi/ac.asl b/src/ec/quanta/ene_kb3940q/acpi/ac.asl new file mode 100644 index 0000000000..8c85fc335c --- /dev/null +++ b/src/ec/quanta/ene_kb3940q/acpi/ac.asl @@ -0,0 +1,39 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011-2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +// Scope (EC0) + +Device (AC) +{ + Name (_HID, "ACPI0003") + Name (_PCL, Package () { \_SB }) + + Method (_PSR) + { + Store(ADPT, Local0) + Return(Local0) + } + + Method (_STA) + { + Return (0x0F) + } +} diff --git a/src/ec/quanta/ene_kb3940q/acpi/battery.asl b/src/ec/quanta/ene_kb3940q/acpi/battery.asl new file mode 100644 index 0000000000..8fbd9bba1b --- /dev/null +++ b/src/ec/quanta/ene_kb3940q/acpi/battery.asl @@ -0,0 +1,159 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011-2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* + * The mainboard must define strings in the root scope to + * report device-specific battery information to the OS. + * + * BATV: Vendor + */ + +// Scope (EC0) + +Device (BATX) +{ + Name (_HID, EISAID ("PNP0C0A")) + Name (_UID, 1) + Name (_PCL, Package () { \_SB }) + + Name (PBIF, Package () { + 0x00000001, // 0 Power Unit: mAh + 0xFFFFFFFF, // 1 Design Capacity + 0xFFFFFFFF, // 2 Last Full Charge Capacity + 0x00000001, // 3 Battery Technology: Rechargeable + 0xFFFFFFFF, // 4 Design Voltage + 0x000000FA, // 5 Design Capacity of Warning + 0x00000096, // 6 Design Capacity of Low + 0x0000000A, // 7 Capacity Granularity 1 + 0x00000019, // 8 Capacity Granularity 2 + "", // 9 Model Number + "", // 10 Serial Number + "", // 11 Battery Type + "" // 12 OEM Information + }) + + Name (PBST, Package () { + 0x00000000, // Battery State + 0xFFFFFFFF, // Battery Present Rate + 0xFFFFFFFF, // Battery Remaining Capacity + 0xFFFFFFFF, // Battery Present Voltage + }) + + // Workaround for full battery status, enabled by default + Name (BFWK, One) + + // Method to enable full battery workaround + Method (BFWE) + { + Store (One, BFWK) + } + + // Method to disable full battery workaround + Method (BFWD) + { + Store (Zero, BFWK) + } + + // Device insertion/removal control method that returns a device’s status. + // Power resource object that evaluates to the current on or off state of + // the Power Resource. + Method (_STA, 0, Serialized) + { + If (BTIN) { + Return (0x1F) + } Else { + Return (0x0F) + } + } + + Method (_BIF, 0, Serialized) + { + // Update fields from EC + Store (BDC0, Index (PBIF, 1)) // Batt Design Capacity + Store (BFC0, Index (PBIF, 2)) // Batt Last Full Charge Capacity + Store (BDV0, Index (PBIF, 4)) // Batt Design Voltage + Divide(BFC0, 0x64, Local0, Local1) + Multiply(Local1, 0x0A, Local0) + Store(Local0, Index(PBIF, 5)) + Multiply(Local1, 0x05, Local0) + Store (Local0, Index (PBIF, 6)) + Store (ToString(BATD), Index (PBIF, 9)) // Model Number + Store (ToDecimalString(BSN0), Index (PBIF, 10)) // Serial Number + Store (ToString(BCHM), Index (PBIF, 11)) // Battery Type + Store (\BATV, Index (PBIF, 12)) // OEM information + + Return (PBIF) + } + + Method (_BST, 0, Serialized) + { + // + // 0: BATTERY STATE + // + // bit 0 = discharging + // bit 1 = charging + // bit 2 = critical level + // + + // Get battery state from EC + Store (BST0, Local0) + Store (Local0, Index (PBST, 0)) + + // + // 1: BATTERY PRESENT RATE/CURRENT + // + Store (BPC0, Local1) + If (LAnd (Local1, 0x8000)) { + Xor (Local1, 0xFFFF, Local1) + Increment (Local1) + } + Store (Local1, Index (PBST, 1)) + + // + // 2: BATTERY REMAINING CAPACITY + // + Store (BRC0, Local1) + + If (LAnd (BFWK, LAnd (ADPT, LNot (Local0)))) { + // On AC power and battery is neither charging + // nor discharging. Linux expects a full battery + // to report same capacity as last full charge. + // https://bugzilla.kernel.org/show_bug.cgi?id=12632 + Store (BFC0, Local2) + + // See if within ~3% of full + ShiftRight (Local2, 5, Local3) + If (LAnd (LGreater (Local1, Subtract (Local2, Local3)), + LLess (Local1, Add (Local2, Local3)))) + { + Store (Local2, Local1) + } + } + Store (Local1, Index (PBST, 2)) + + // + // 3: BATTERY PRESENT VOLTAGE + // + Store (BPV0, Index (PBST, 3)) + + Return (PBST) + } +} diff --git a/src/ec/quanta/ene_kb3940q/acpi/ec.asl b/src/ec/quanta/ene_kb3940q/acpi/ec.asl new file mode 100644 index 0000000000..4e703feca5 --- /dev/null +++ b/src/ec/quanta/ene_kb3940q/acpi/ec.asl @@ -0,0 +1,280 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011-2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * The mainboard must define a PNOT method to handle power + * state notifications and Notify CPU device objects to + * re-evaluate their _PPC and _CST tables. + */ + +External (\_PR.CPU0._PPC, IntObj) + +Device (EC0) +{ + Name (_HID, EISAID ("PNP0C09")) + Name (_UID, 1) + Name (_GPE, Add(EC_SCI_GPI, 16)) // GPE for Runtime SCI + + OperationRegion (ERAM, EmbeddedControl, 0x00, 0xff) + Field (ERAM, ByteAcc, Lock, Preserve) + { + // EC Name Space Configuration + + Offset(0x40), + BDC0, 16, // Batt Design Capacity ; 40h, 41h + BDV0, 16, // Batt Design Voltage ; 42h, 43h + BFC0, 16, // Batt Last Full Charge Capacity ; 44h, 45h + BPC0, 16, // Batt Current ; 46h, 47h + BRC0, 16, // Batt Remaining Capacity ; 48h, 49h + BPV0, 16, // Batt Present Voltage ; 4Ah, 4Bh + BCG0, 16, // Batt Charge current ; 4Ch, 4Dh + BACV, 16, // Batt Charging Voltage ; 4Eh, 4Fh + BTM0, 16, // Batt Battery Temp ; 50h, 51h + BSN0, 16, // Batt Serial Number ; 52h, 53h + BPCT, 16, // Batt Percentage of full charge ; 54h, 55h + BSSB, 16, // BATT Battery Status SMB ; 56h, 57h + CYC0, 16, // Batt Cycle Counter ; 58h, 59h + BMD0, 16, // Manufacture Date ; 5Ah, 5Bh + // Batt Day ; BIT[4:0] (Day) + // Batt Month ; BIT[9:5] (Month) + // Batt Year ; BIT[15:10] (Year) + + + Offset(0x60), + BCHM, 32, // Battery Chemistry ; 60h - 64h + BATD, 56, // Battery Device name ; 64h - 6Ah + + Offset(0x70), + ADPT, 1, // AC Adapter Status for OS ; 70h.0 + ADPN, 1, // AC Adapter H/W status ; 70h.1 + BTIN, 1, // Battery Present ; 70h.2 + BTBD, 1, // Battery Malfunction ; 70h.3 + ACMD, 1, // ACPI Mode ; 70h.4 + , 1, // Reserved ; 70h.5 + SSBS, 1, // 1=Standard BIOS, 0=Coreboot ; 70h.6 + PSTH, 1, // Passive Thermal Policy ; 70h.7 + BST0, 8, // Battery Status ; 71h + // Bit0 : Discharging + // Bit1 : Charging + // Bit2 : Discharging and Critical Low + // Bit3-7 : Reserved + LIDF, 1, // Lid is open ; 72h.0 + GPRC, 1, // Recovery GPI Status ; 72h.1 + , 6, // Reserved ; 72h.2-7 + TPLD, 1, // TouchPad LED Activation ; 73h.0 + TPST, 1, // Touchpad LED Status ; 73h.1 + , 6, // Reserved ; 73h.2-7 + + Offset(0x78), + CTMP, 8, // Current CPU Temperature ; 78h + SKTB, 8, // GPU Temperature ; 79h + LTM1, 8, // Local Temp 1 ; 7Ah + LTM2, 8, // Local Temp 2 ; 7Bh + FTCH, 16, // Fan Tachometer value ; 7Ch - 7Dh + FDBG, 16, // Fan Debug - Override Fan Tach value ; 7Eh - 7Fh + , 1, // Reserved ; 80h.0 + KBID, 1, // 0=EN KBD, 1=JP KBD ; 80h.1 + , 6, // Reserved ; 80h.2-7 + NPST, 8, // Number of P-State level ; 81h + MPST, 8, // Maxumum P-State ; 82h + KWAK, 1, // Keyboard WAKE(0=Disable,1=Enable) ; 83h.0 + TWAK, 1, // TouchPad WAKE(0=Disable,1=Enable) ; 83h.1 + , 1, // Reserved ; 83h.2 + LWAK, 1, // LAN Wake Enable (0=Disable, 1=Enable); 83h.3 + RWAK, 1, // RTC Wake Enable(0=DIsable,1=Enable) ; 83h.4 + , 3, // Reserved ; 83h.5-7 + KBEV, 1, // Keyboard Wake Event ; 84h.0 + TPEV, 1, // TouchPad Wake Event ; 84h.1 + LDEV, 1, // Lid Wake Event ; 84h.2 + , 4, // Reserved ; 84h.3-6 + PBEV, 1, // Power Button Wake Event ; 84h.7 + + ECCD, 8, // EC Code State ; 85h + ROFW, 8, // RO FW Reason ID ; 86h + + Offset(0xBA), + FWVR, 48, // EC Firmware Version ; BAh-BFh + + Offset(0xC0), + SMPR, 8, // SMBus protocol register ; C0h + SMST, 8, // SMBus status register ; C1h + SMAD, 8, // SMBus address register ; C2h + SMCM, 8, // SMBus command register ; C3h + SMD0, 0x100, // SMBus data regs (32) ; C4h - E3h + BCNT, 8, // SMBus Block Count ; E4h + } + + Method (_CRS, 0, NotSerialized) + { + Name (ECMD, ResourceTemplate() + { + IO (Decode16, 0x62, 0x62, 0, 1) + IO (Decode16, 0x66, 0x66, 0, 1) + }) + Return (ECMD) + } + + Method(_STA) + { + Return(0x0F) + } + + + Method (_REG, 2, NotSerialized) + { + // Initialize AC power state + Store (ADPT, \PWRS) + + // Initialize LID switch state + Store (LIDF, \LIDS) + + // Force a read of CPU temperature + Store (CTMP, Local0) + + // Find and program number of P-States + Store (SizeOf (\_PR.CPU0._PSS), MPST) + Store ("Programming number of P-states: ", Debug) + Store (MPST, Debug) + + // Find and program the current P-State + Store(\_PR.CPU0._PPC, NPST) + Store ("Programming Current P-state: ", Debug) + Store (NPST, Debug) + } + +/* + * EC Query Responses + * + * Lid Status Change 06h + * Wifi Button Event (F12) 07h + * TZ Event Update CPU Temp 08h + * CPU P-State Down 0Eh + * CPU P-State UP 0Fh + + * AC plug in 10h + * AC removed 11h + * Battery Plugged in 12h + * Battery Removed 13h + * Battery State Change 14h + */ + + // Wifi Button Event + Method (_Q07) + { + Store ("Wifi Button Event 0x07", Debug) + } + + // Thermal Event + Method (_Q08) + { + Store ("Thermal Event 0x08", Debug) + Notify(\_TZ.THRM, 0x80) + } + + // Pstate Down + Method (_Q0E) + { + Store ("Pstate Event 0x0E", Debug) + + Store(\_PR.CPU0._PPC, Local0) + Subtract(PPCM, 0x01, Local1) + + If(LLess(Local0, Local1)) { + Increment(Local0) + \PPCN () + } + + Store(Local0, NPST) + } + + // Pstate Up + Method (_Q0F) + { + Store ("Pstate Event 0x0F", Debug) + Store(\_PR.CPU0._PPC, Local0) + + If(Local0) { + Decrement(Local0) + \PPCN () + } + + Store(Local0, NPST) + } + + // AC Power Connected + Method (_Q10, 0, NotSerialized) + { + Store ("AC Insertion Event 0x10", Debug) + Store (One, \PWRS) + Notify (AC, 0x80) + Notify (BATX, 0x80) + \PNOT () + } + + // AC Power Removed + Method (_Q11, 0, NotSerialized) + { + Store ("AC Detach Event 0x11", Debug) + Store (Zero, \PWRS) + Notify (AC, 0x80) + Notify (BATX, 0x80) + \PNOT () + } + + // Battery State Change - Attach Event + Method (_Q12, 0, NotSerialized) + { + Store ("Battery Insertion Event 0x12", Debug) + + Notify (BATX, 0x81) + Notify (BATX, 0x80) + \PNOT () + } + + // Battery State Change - Detach Event + Method (_Q13, 0, NotSerialized) + { + Store ("Battery Detach Event 0x13", Debug) + + Notify (BATX, 0x81) + Notify (BATX, 0x80) + \PNOT () + } + + + // Battery State Change Event + Method (_Q14, 0, NotSerialized) + { + Store ("Battery State Change Event 0x14", Debug) + + Notify (BATX, 0x80) + } + + // Lid Switch Event + Method (_Q06) + { + Store ("Lid Switch Event 0x06", Debug) + sleep(20) + Store (LIDF, \LIDS) + Notify (\_SB.LID0, 0x80) + } + + #include "ac.asl" + #include "battery.asl" +} diff --git a/src/ec/quanta/ene_kb3940q/acpi/superio.asl b/src/ec/quanta/ene_kb3940q/acpi/superio.asl new file mode 100644 index 0000000000..db4b4128f1 --- /dev/null +++ b/src/ec/quanta/ene_kb3940q/acpi/superio.asl @@ -0,0 +1,57 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +// Scope is \_SB.PCI0.LPCB + +Device (SIO) { + Name (_UID, 0) + Name (_ADR, 0) + + +#ifdef SIO_EC_ENABLE_PS2K + Device (PS2K) // Keyboard + { + Name (_UID, 0) + Name (_ADR, 0) + Name (_HID, EISAID("PNP0303")) + Name (_CID, EISAID("PNP030B")) + + Method (_STA, 0, NotSerialized) { + Return (0x0F) + } + + Name (_CRS, ResourceTemplate() + { + FixedIO (0x60, 0x01) + FixedIO (0x64, 0x01) + IRQNoFlags () {1} + }) + + Name (_PRS, ResourceTemplate() + { + StartDependentFn (0, 0) { + FixedIO (0x60, 0x01) + FixedIO (0x64, 0x01) + IRQNoFlags () {1} + } + EndDependentFn () + }) + } +#endif +} diff --git a/src/ec/quanta/ene_kb3940q/chip.h b/src/ec/quanta/ene_kb3940q/chip.h new file mode 100644 index 0000000000..ce95c1c27e --- /dev/null +++ b/src/ec/quanta/ene_kb3940q/chip.h @@ -0,0 +1,35 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef _EC_QUANTA_ENE_KB3940Q_CHIP_H +#define _EC_QUANTA_ENE_KB3940Q_CHIP_H + +#include <device/device.h> +#include <pc80/keyboard.h> + +struct chip_operations; +extern struct chip_operations ec_quanta_ene_kb3940q_ops; + +struct ec_quanta_ene_kb3940q_config { + struct pc_keyboard keyboard; +}; + +#endif /* _EC_QUANTA_ENE_KB3940Q_CHIP_H */ diff --git a/src/ec/quanta/ene_kb3940q/ec.c b/src/ec/quanta/ene_kb3940q/ec.c new file mode 100644 index 0000000000..1ef971244f --- /dev/null +++ b/src/ec/quanta/ene_kb3940q/ec.c @@ -0,0 +1,188 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef __PRE_RAM__ + +#include <console/console.h> +#include <device/device.h> +#include <device/pnp.h> +#include <stdlib.h> +#include <arch/io.h> +#include <delay.h> +#include <elog.h> +#include "ec.h" +#include "chip.h" + +/* kbc helper functions from drivers/pc80/keyboard.c */ +static int ec_input_buffer_empty(u8 status_port) +{ + u32 timeout; + for(timeout = KBC_TIMEOUT_IN_MS; timeout && (inb(status_port) & KBD_IBF); + timeout--) { + mdelay(1); + } + + if (!timeout) { + printk(BIOS_WARNING, "Unexpected EC/KBD input buffer full\n"); + } + return !!timeout; +} + + +static int ec_output_buffer_full(u8 status_port) +{ + u32 timeout; + for(timeout = KBC_TIMEOUT_IN_MS; timeout && ((inb(status_port) + & KBD_OBF) == 0); timeout--) { + mdelay(1); + } + + if (!timeout) { + printk(BIOS_INFO, "EC/KBD output buffer result timeout\n"); + } + return !!timeout; +} + + + +/* The ENE 60/64 EC registers are the same command/status IB/OB KBC pair. + * Check status from 64 port before each command. + * + * Ex. Get panel ID command C43/D77 + * Check IBF empty. Then Write 0x43(CMD) to 0x64 Port + * Check IBF empty. Then Write 0x77(DATA) to 0x60 Port + * Check OBF set. Then Get Data(0x03:panel ID) from 0x60 + * Different commands return may or may not respond and may have multiple + * bytes. Keep it simple for now + */ + +u8 ec_kbc_read_ob(void) +{ + if (!ec_output_buffer_full(KBD_STATUS)) return 0; + return inb(KBD_DATA); +} + +void ec_kbc_write_cmd(u8 cmd) +{ + if (!ec_input_buffer_empty(KBD_STATUS)) return; + outb(cmd, KBD_COMMAND); +} + +void ec_kbc_write_ib(u8 data) +{ + if (!ec_input_buffer_empty(KBD_STATUS)) return; + outb(data, KBD_DATA); +} + +/* EC Host Control Protocol routines */ +u8 ec_read_ob(void) +{ + if (!ec_output_buffer_full(EC_SC)) return 0; + return inb(EC_DATA); +} + +void ec_write_cmd(u8 cmd) +{ + if (!ec_input_buffer_empty(EC_SC)) return; + outb(cmd, EC_COMMAND); +} + +void ec_write_ib(u8 data) +{ + if (!ec_input_buffer_empty(EC_SC)) return; + outb(data, EC_DATA); +} + +/* + * These functions are for accessing the ENE932 device RAM space + */ +u8 ec_mem_read(u8 addr) +{ + ec_write_cmd(EC_CMD_READ_RAM); + ec_write_ib(addr); + return ec_read_ob(); +} + +void ec_mem_write(u8 addr, u8 data) +{ + ec_write_cmd(EC_CMD_WRITE_RAM); + ec_write_ib(addr); + ec_write_ib(data); + return; +} + +#ifndef __SMM__ +static void ene_kb3940q_log_events(void) +{ +#if CONFIG_ELOG + u8 reason = ec_mem_read(EC_SHUTDOWN_REASON); + if (reason) + elog_add_event_byte(ELOG_TYPE_EC_SHUTDOWN, reason); +#endif +} + +static void ene_kb3940q_init(device_t dev) +{ + struct ec_quanta_ene_kb3940q_config *conf = dev->chip_info; + + if (!dev->enabled) + return; + + printk(BIOS_DEBUG, "Quanta EnE KB3940Q: Initializing keyboard.\n"); + pc_keyboard_init(&conf->keyboard); + + ene_kb3940q_log_events(); +} + + +static void ene_kb3940q_read_resources(device_t dev) +{ + /* This function avoids an error on serial console. */ +} + + +static void ene_kb3940q_enable_resources(device_t dev) +{ + /* This function avoids an error on serial console. */ +} + +static struct device_operations ops = { + .init = ene_kb3940q_init, + .read_resources = ene_kb3940q_read_resources, + .enable_resources = ene_kb3940q_enable_resources +}; + +static struct pnp_info pnp_dev_info[] = { + { &ops, 0, 0, { 0, 0 }, } +}; + +static void enable_dev(device_t dev) +{ + pnp_enable_devices(dev, &pnp_ops, ARRAY_SIZE(pnp_dev_info), + pnp_dev_info); +} + +struct chip_operations ec_quanta_ene_kb3940q_ops = { + CHIP_NAME("QUANTA EnE KB3940Q EC") + .enable_dev = enable_dev +}; +#endif /* ! __SMM__ */ +#endif /* ! __PRE_RAM__ */ diff --git a/src/ec/quanta/ene_kb3940q/ec.h b/src/ec/quanta/ene_kb3940q/ec.h new file mode 100644 index 0000000000..ab01b2914c --- /dev/null +++ b/src/ec/quanta/ene_kb3940q/ec.h @@ -0,0 +1,213 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * EC communication interface for QUANTA EnE KB3940Q Embedded Controller. + */ + +#ifndef _EC_QUANTA_ENE_KB3940Q_EC_H +#define _EC_QUANTA_ENE_KB3940Q_EC_H + +#define EC_IO 0x380 /* Mainboard specific. Could be Kconfig option */ +#define EC_IO_HIGH EC_IO + 1 +#define EC_IO_LOW EC_IO + 2 +#define EC_IO_DATA EC_IO + 3 + + + +// 60h/64h Command Interface +#define KBD_DATA 0x60 +#define KBD_COMMAND 0x64 +#define KBD_STATUS 0x64 +#define KBD_IBF (1 << 1) // 1: input buffer full (data ready for ec) +#define KBD_OBF (1 << 0) // 1: output buffer full (data ready for host) + +// 62h/66h Command Interface +#define EC_DATA 0x62 +#define EC_COMMAND 0x66 +#define EC_SC 0x66 + +/* Wait 400ms for keyboard controller answers */ +#define KBC_TIMEOUT_IN_MS 400 + +u8 ec_kbc_read_ob(void); +void ec_kbc_write_cmd(u8 cmd); +void ec_kbc_write_ib(u8 data); +u8 ec_read_ob(void); +void ec_write_cmd(u8 cmd); +void ec_write_ib(u8 data); + +u8 ec_mem_read(u8 addr); +void ec_mem_write(u8 addr, u8 data); + +/***************************************************************************** + * EC Internal memory + */ + +#define EC_BAT_DCAP_LO 0x40 +#define EC_BAT_DCAP_HI 0x41 +#define EC_BAT_DVOLT_LO 0x42 +#define EC_BAT_DVOLT_HI 0x43 +#define EC_BAT_FULL_CAP_LO 0x44 +#define EC_BAT_FULL_CAP_HI 0x45 +#define EC_BAT_RATE_LO 0x46 +#define EC_BAT_RATE_HI 0x47 +#define EC_BAT_RMC_LO 0x48 +#define EC_BAT_RMC_HI 0x49 +#define EC_BAT_VOLT_LO 0x4A +#define EC_BAT_VOLT_HI 0x4B +#define EC_BAT_CHRG_CURT_LO 0x4C +#define EC_BAT_CHRG_CURT_HI 0x4D +#define EC_BAT_CHRG_VOLT_LO 0x4E +#define EC_BAT_CHRG_VOLT_HI 0x4F +#define EC_BAT_TEMP_LO 0x50 +#define EC_BAT_TEMP_HI 0x51 +#define EC_BAT_SN_LO 0x52 +#define EC_BAT_SN_HI 0x53 +#define EC_BAT_RSOC_LO 0x54 +#define EC_BAT_RSOC_HI 0x55 +#define EC_BAT_STATUS_LO 0x56 +#define EC_BAT_STATUS_HI 0x57 +#define EC_BAT_CYCLE_COUNT_LO 0x58 +#define EC_BAT_CYCLE_COUNT_HI 0x59 +#define EC_BAT_MFG_DATE_LO 0x5A +#define EC_BAT_MFG_DATE_HI 0x5B +#define EC_BAT_CHEMISTRY0 0x60 +#define EC_BAT_CHEMISTRY1 0x61 +#define EC_BAT_CHEMISTRY2 0x62 +#define EC_BAT_CHEMISTRY3 0x63 +#define EC_BAT_DEVICE_NAME0 0x64 +#define EC_BAT_DEVICE_NAME1 0x65 +#define EC_BAT_DEVICE_NAME2 0x66 +#define EC_BAT_DEVICE_NAME3 0x67 +#define EC_BAT_DEVICE_NAME4 0x68 +#define EC_BAT_DEVICE_NAME5 0x69 +#define EC_BAT_DEVICE_NAME6 0x6A + +#define EC_POWER_FLAG 0x70 +#define EC_PF_ADAPTER_IN (1 << 0) +#define EC_PF_ADAPTER_PIN (1 << 1) +#define EC_PF_BATT_IN (1 << 2) +#define EC_PF_BATT_DESTROY (1 << 3) +#define EC_PF_ACPI_MODE (1 << 4) +#define EC_PF_X86_BIOS (1 << 6) +#define EC_PF_COREBOOT 0 +#define EC_PF_PASSIVE_THERM (1 << 7) + +#define EC_CHARGER_STATUS 0x71 +#define EC_CHS_BAT_DISCHARGING (1 << 0) +#define EC_CHS_BAT_CHARGING (1 << 1) +#define EC_CHS_BAT_CRITICAL (1 << 2) + +#define EC_HW_GPI_STATUS 0x72 +#define EC_GPI_LID_STAT_BIT 0 +#define EC_GPI_RECOVERY_MODE_BIT 1 +#define EC_GPI_LID_OPEN (1 << EC_GPI_LID_STAT_BIT) +#define EC_GPI_RECOVERY_STATUS (1 << EC_GPI_RECOVERY_MODE_BIT) + +#define EC_GPIO_STATUS 0x73 +#define EC_GPIO_TP_LED_ENABLE (1 << 0) +#define EC_GPIO_TP_LED_STATUS (1 << 1) + +#define EC_CPU_TMP 0x78 +#define EC_GPU_TMP 0x79 +#define EC_LOCAL_TMP1 0x7A +#define EC_LOCAL_TMP2 0x7B +#define EC_FAN_TACH_LO 0x7C +#define EC_FAN_TACH_HI 0x7D +#define EC_FAN_DBG_RPM_LO 0x7E +#define EC_FAN_DBG_RPM_HI 0x7F + +#define EC_KBID_REG 0x80 +#define EC_KBD_EN 0 +#define EC_KBD_JP (1 << 1) +#define EC_CURR_PS 0x81 +#define EC_MAX_PS 0x82 + +#define EC_EC_PSW 0x83 +#define EC_PSW_IKB (1 << 0) +#define EC_PSW_TP (1 << 1) +#define EC_PSW_LAN (1 << 3) +#define EC_PSW_RTC (1 << 4) +#define EC_PSW_USB (1 << 5) + +#define EC_WAKE_EVEN_TID 0x84 +#define EC_WID_IKB (1 << 0) +#define EC_WID_TP (1 << 1) +#define EC_WID_LID (1 << 2) +#define EC_WID_PWRSW (1 << 7) + +#define EC_CODE_STATE 0x85 +#define EC_COS_INITIAL_STAGE 0xBB +#define EC_COS_EC_RO 0xC0 +#define EC_COS_EC_RW 0xC1 + +#define EC_FW_REASON_ID 0x86 +#define EC_FWR_NOT_RO 0x00 +#define EC_FWR_GPI_ASSERTED 0x01 +#define EC_FWR_HOTKEY_PRESSED 0x02 +#define EC_FWR_FIRMWARE_CORRUPT 0x03 + +#define EC_SHUTDOWN_REASON 0xB9 +#define EC_FW_VER0 0xBA +#define EC_FW_VER1 0xBB +#define EC_FW_VER2 0xBC +#define EC_FW_VER3 0xBD +#define EC_FW_VER4 0xBE +#define EC_FW_VER5 0xBF +#define EC_SMBPTCL 0xC0 +#define EC_SMBSTA 0xC1 +#define EC_SMBADDR 0xC2 +#define EC_SMBCMD 0xC3 +#define EC_SMBDATA 0xC4 +#define EC_SMBBCNT 0xE4 + +/***************************************************************************** + * SMI / SCI event status + */ +#define Q_EVENT_LID_STATUS 0x06 +#define Q_EVENT_WIFI_BUTTON 0x06 +#define Q_EVENT_THERM_EVENT 0x08 +#define Q_EVENT_PSTATE_DOWN 0x0E +#define Q_EVENT_PSTATE_UP 0x0F +#define Q_EVENT_AC_PLUGGED 0x10 +#define Q_EVENT_AC_UNPLUGGED 0x11 +#define Q_EVENT_BATTERY_PLUGGED 0x12 +#define Q_EVENT_BATTERY_UNPLUGGED 0x13 +#define Q_EVENT_BATTERY_STATUS 0x14 + +/***************************************************************************** + * EC Commands + */ +#define EC_CMD_ENABLE_ACPI_MODE 0x71 +#define EC_CMD_DISABLE_ACPI_MODE 0x72 +#define EC_CMD_DISABLE_SMBUS_EVENT 0x73 +#define EC_CMD_ENABLE_SMBUS_EVENT 0x74 +#define EC_CMD_SYSTEM_RESET 0x78 +#define EC_CMD_SYSTEM_SHUTDOWN 0x79 +#define EC_CMD_RESET_FOR_FW_UPDATE 0x7D +#define EC_CMD_IDLE_FOR SPI_UPDATE 0x7E +#define EC_CMD_READ_RAM 0x80 +#define EC_CMD_WRITE_RAM 0x81 +#define EC_CMD_BURST_ENABLE 0x82 +#define EC_CMD_BURST_DISABLE 0x83 +#define EC_CMD_QUERY_EVENT 0x84 + + +#endif /* _EC_QUANTA_ENE_KB3940Q_EC_H */ diff --git a/src/mainboard/google/Kconfig b/src/mainboard/google/Kconfig index 0603566a7e..4fd695dd02 100644 --- a/src/mainboard/google/Kconfig +++ b/src/mainboard/google/Kconfig @@ -21,6 +21,8 @@ if VENDOR_GOOGLE choice prompt "Mainboard model" +config BOARD_GOOGLE_BUTTERFLY + bool "Butterfly" config BOARD_GOOGLE_PARROT bool "Parrot" config BOARD_GOOGLE_SNOW @@ -28,6 +30,7 @@ config BOARD_GOOGLE_SNOW endchoice +source "src/mainboard/google/butterfly/Kconfig" source "src/mainboard/google/parrot/Kconfig" source "src/mainboard/google/snow/Kconfig" diff --git a/src/mainboard/google/butterfly/Kconfig b/src/mainboard/google/butterfly/Kconfig new file mode 100644 index 0000000000..ea301745e3 --- /dev/null +++ b/src/mainboard/google/butterfly/Kconfig @@ -0,0 +1,61 @@ +if BOARD_GOOGLE_BUTTERFLY + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select ARCH_X86 + select CPU_INTEL_SOCKET_RPGA989 + select NORTHBRIDGE_INTEL_IVYBRIDGE + select SOUTHBRIDGE_INTEL_C216 + select EC_QUANTA_ENE_KB3940Q + select BOARD_HAS_FADT + select BOARD_ROMSIZE_KB_8192 + select HAVE_ACPI_TABLES + select HAVE_OPTION_TABLE + select HAVE_ACPI_RESUME + select HAVE_MAINBOARD_RESOURCES + select MMCONF_SUPPORT + select HAVE_SMI_HANDLER + select GFXUMA + select CHROMEOS + select EXTERNAL_MRC_BLOB + + # Workaround for EC/KBC IRQ1. + select SERIRQ_CONTINUOUS_MODE + +config MAINBOARD_DIR + string + default google/butterfly + +config MAINBOARD_PART_NUMBER + string + default "Butterfly" + +config MMCONF_BASE_ADDRESS + hex + default 0xf0000000 + +config IRQ_SLOT_COUNT + int + default 18 + +config MAX_CPUS + int + default 8 + +config VGA_BIOS_FILE + string + default "pci8086,0106.rom" + +config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID + hex + default 0x1ae0 + +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID + hex + default 0xc000 + +config MAINBOARD_VENDOR + string + default "Hewlett-Packard" + +endif # BOARD_GOOGLE_BUTTERFLY diff --git a/src/mainboard/google/butterfly/Makefile.inc b/src/mainboard/google/butterfly/Makefile.inc new file mode 100644 index 0000000000..9e753fba81 --- /dev/null +++ b/src/mainboard/google/butterfly/Makefile.inc @@ -0,0 +1,27 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +ramstage-y += ec.c + +romstage-$(CONFIG_CHROMEOS) += chromeos.c +ramstage-$(CONFIG_CHROMEOS) += chromeos.c + +smm-$(CONFIG_HAVE_SMI_HANDLER) += mainboard_smi.c + +SRC_ROOT = $(src)/mainboard/google/butterfly diff --git a/src/mainboard/google/butterfly/acpi/chromeos.asl b/src/mainboard/google/butterfly/acpi/chromeos.asl new file mode 100644 index 0000000000..27373e1480 --- /dev/null +++ b/src/mainboard/google/butterfly/acpi/chromeos.asl @@ -0,0 +1,25 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Name(OIPG, Package() { + Package() { 0x001, 1, 0xFF, "PantherPoint" }, // recovery button + Package() { 0x002, 1, 0xFF, "PantherPoint" }, // developer button + Package() { 0x003, 0, 6, "PantherPoint" }, // firmware write protect +}) + diff --git a/src/mainboard/google/butterfly/acpi/ec.asl b/src/mainboard/google/butterfly/acpi/ec.asl new file mode 100644 index 0000000000..bb053cdd03 --- /dev/null +++ b/src/mainboard/google/butterfly/acpi/ec.asl @@ -0,0 +1,26 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* mainboard configuration */ +#include "../ec.h" + +#define EC_SCI 13 // GPIO13 -> Runtime SCI + +/* ACPI code for EC functions */ +#include <ec/quanta/ene_kb3940q/acpi/ec.asl> diff --git a/src/mainboard/google/butterfly/acpi/mainboard.asl b/src/mainboard/google/butterfly/acpi/mainboard.asl new file mode 100644 index 0000000000..c6e35e8a84 --- /dev/null +++ b/src/mainboard/google/butterfly/acpi/mainboard.asl @@ -0,0 +1,63 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +Scope (\_SB) { + Device (LID0) + { + Name (_HID, EisaId("PNP0C0D")) + Method (_LID, 0) + { + Store (\_SB.PCI0.LPCB.EC0.LIDF, \LIDS) + Return (\LIDS) + } + } + + Device (PWRB) + { + Name (_HID, EisaId("PNP0C0C")) + } + + Device (TPAD) + { + Name (_ADR, 0x0) + Name (_UID, 1) + + // Report as a Sleep Button device so Linux will + // automatically enable it as a wake source + Name(_HID, EisaId("PNP0C0E")) + + // Trackpad Wake is GPIO11, wake from S3 + Name(_PRW, Package(){0x1b, 0x03}) + + Name(_CRS, ResourceTemplate() + { + // PIRQG -> GSI22 + Interrupt (ResourceConsumer, EDGE, ActiveLow) {22} + + // SMBUS Address 0x67 + VendorShort (ADDR) {0x67} + }) + } + +} + +// Battery information +Name (BATV, "GOOGLE") diff --git a/src/mainboard/google/butterfly/acpi/platform.asl b/src/mainboard/google/butterfly/acpi/platform.asl new file mode 100644 index 0000000000..5c84ba14d5 --- /dev/null +++ b/src/mainboard/google/butterfly/acpi/platform.asl @@ -0,0 +1,88 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011-2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* The APM port can be used for generating software SMIs */ + +OperationRegion (APMP, SystemIO, 0xb2, 2) +Field (APMP, ByteAcc, NoLock, Preserve) +{ + APMC, 8, // APM command + APMS, 8 // APM status +} + +/* Port 80 POST */ + +OperationRegion (POST, SystemIO, 0x80, 1) +Field (POST, ByteAcc, Lock, Preserve) +{ + DBG0, 8 +} + +/* SMI I/O Trap */ +Method(TRAP, 1, Serialized) +{ + Store (Arg0, SMIF) // SMI Function + Store (0, TRP0) // Generate trap + Return (SMIF) // Return value of SMI handler +} + +/* The _PIC method is called by the OS to choose between interrupt + * routing via the i8259 interrupt controller or the APIC. + * + * _PIC is called with a parameter of 0 for i8259 configuration and + * with a parameter of 1 for Local Apic/IOAPIC configuration. + */ + +Method(_PIC, 1) +{ + // Remember the OS' IRQ routing choice. + Store(Arg0, PICM) +} + +/* The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ + +Method(_PTS,1) +{ + +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + /* Update in case state changed while asleep */ + /* Update AC status */ + Store (\_SB.PCI0.LPCB.EC0.ADPT, Local0) + if (LNotEqual (Local0, \PWRS)) { + Store (Local0, \PWRS) + Notify (\_SB.PCI0.LPCB.EC0.AC, 0x80) + } + + /* Update LID status */ + Store (\_SB.PCI0.LPCB.EC0.LIDF, Local0) + if (LNotEqual (Local0, \LIDS)) { + Store (Local0, \LIDS) + Notify (\_SB.LID0, 0x80) + } + + Return(Package(){0,0}) +} + diff --git a/src/mainboard/google/butterfly/acpi/sandybridge_pci_irqs.asl b/src/mainboard/google/butterfly/acpi/sandybridge_pci_irqs.asl new file mode 100644 index 0000000000..ba725ac1db --- /dev/null +++ b/src/mainboard/google/butterfly/acpi/sandybridge_pci_irqs.asl @@ -0,0 +1,65 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for Sandybridge */ + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 },// GFX INTA -> PIRQA (MSI) + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 16 },// D27IP_ZIP HDA INTA -> PIRQA (MSI) + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 17 },// D28IP_P1IP WLAN INTA -> PIRQB + Package() { 0x001cffff, 1, 0, 21 },// D28IP_P2IP ETH0 INTB -> PIRQF + Package() { 0x001cffff, 2, 0, 19 },// D28IP_P3IP SDCARD INTC -> PIRQD + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, 0, 19 },// D29IP_E1P EHCI1 INTA -> PIRQD + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, 0, 21 },// D26IP_E2P EHCI2 INTA -> PIRQF + // LPC devices 0:1f.0 + Package() { 0x001fffff, 0, 0, 17 }, // D31IP_SIP SATA INTA -> PIRQB (MSI) + Package() { 0x001fffff, 1, 0, 23 }, // D31IP_SMIP SMBUS INTB -> PIRQH + Package() { 0x001fffff, 2, 0, 16 }, // D31IP_TTIP THRT INTC -> PIRQA + }) + } Else { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKF, 0 }, + Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, \_SB.PCI0.LPCB.LNKF, 0 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKH, 0 }, + Package() { 0x001fffff, 2, \_SB.PCI0.LPCB.LNKA, 0 }, + }) + } +} + diff --git a/src/mainboard/google/butterfly/acpi/superio.asl b/src/mainboard/google/butterfly/acpi/superio.asl new file mode 100644 index 0000000000..2089604e01 --- /dev/null +++ b/src/mainboard/google/butterfly/acpi/superio.asl @@ -0,0 +1,26 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* mainboard configuration */ +#include "../ec.h" + +#define SIO_EC_ENABLE_PS2K // Enable PS/2 Keyboard + +/* ACPI code for EC SuperIO functions */ +#include <ec/quanta/ene_kb3940q/acpi/superio.asl> diff --git a/src/mainboard/google/butterfly/acpi/thermal.asl b/src/mainboard/google/butterfly/acpi/thermal.asl new file mode 100644 index 0000000000..5e0dd43e04 --- /dev/null +++ b/src/mainboard/google/butterfly/acpi/thermal.asl @@ -0,0 +1,81 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +// Thermal Zone + +Scope (\_TZ) +{ + ThermalZone (THRM) + { + Name (_TC1, 0x02) + Name (_TC2, 0x05) + + // Thermal zone polling frequency: 10 seconds + Name (_TZP, 100) + + // Thermal sampling period for passive cooling: 2 seconds + Name (_TSP, 20) + + // Convert from Degrees C to 1/10 Kelvin for ACPI + Method (CTOK, 1) { + // 10th of Degrees C + Multiply (Arg0, 10, Local0) + + // Convert to Kelvin + Add (Local0, 2732, Local0) + + Return (Local0) + } + + // Threshold for OS to shutdown + Method (_CRT, 0, Serialized) + { + Return (CTOK (\TCRT)) + } + + // Threshold for passive cooling + Method (_PSV, 0, Serialized) + { + Return (CTOK (\TPSV)) + } + + // Processors used for passive cooling + Method (_PSL, 0, Serialized) + { + Return (\PPKG ()) + } + + Method (_TMP, 0, Serialized) + { + // Get CPU Temperature from EC + Store (\_SB.PCI0.LPCB.EC0.CTMP, Local0) + + // Convert to 1/10 Kelvin + Multiply (Local0, 10, Local0) + + // Adjust by offset to get Kelvin + Add (Local0, 2732, Local0) + + Return (Local0) + } + +// The EC does all fan control. The is no Active Cooling Fan control (_ACx). + } +} + diff --git a/src/mainboard/google/butterfly/acpi/video.asl b/src/mainboard/google/butterfly/acpi/video.asl new file mode 100644 index 0000000000..3ececa912b --- /dev/null +++ b/src/mainboard/google/butterfly/acpi/video.asl @@ -0,0 +1,43 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +// Brightness write +Method (BRTW, 1, Serialized) +{ + // TODO +} + +// Hot Key Display Switch +Method (HKDS, 1, Serialized) +{ + // TODO +} + +// Lid Switch Display Switch +Method (LSDS, 1, Serialized) +{ + // TODO +} + +// Brightness Notification +Method(BRTN,1,Serialized) +{ + // TODO (no displays defined yet) +} + diff --git a/src/mainboard/google/butterfly/acpi_tables.c b/src/mainboard/google/butterfly/acpi_tables.c new file mode 100644 index 0000000000..ca4f949366 --- /dev/null +++ b/src/mainboard/google/butterfly/acpi_tables.c @@ -0,0 +1,271 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <cbmem.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/cpu.h> +#include <cpu/x86/msr.h> +#include <vendorcode/google/chromeos/gnvs.h> +#include <ec/quanta/ene_kb3940q/ec.h> + +extern const unsigned char AmlCode[]; +#if CONFIG_HAVE_ACPI_SLIC +unsigned long acpi_create_slic(unsigned long current); +#endif + +#include <southbridge/intel/bd82x6x/pch.h> +#include <southbridge/intel/bd82x6x/nvs.h> +#include "thermal.h" + +static void acpi_update_thermal_table(global_nvs_t *gnvs) +{ + /* EC handles all thermal and fan control on Butterfly. */ + gnvs->tcrt = CRITICAL_TEMPERATURE; + gnvs->tpsv = PASSIVE_TEMPERATURE; +} + +static void acpi_create_gnvs(global_nvs_t *gnvs) +{ + memset((void *)gnvs, 0, sizeof(*gnvs)); + gnvs->apic = 1; + gnvs->mpen = 1; /* Enable Multi Processing */ + gnvs->pcnt = dev_count_cpu(); + + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + /* CBMEM TOC */ + gnvs->cmem = (u32)get_cbmem_toc(); + + /* IGD Displays */ + gnvs->ndid = 3; + gnvs->did[0] = 0x80000100; + gnvs->did[1] = 0x80000240; + gnvs->did[2] = 0x80000410; + gnvs->did[3] = 0x80000410; + gnvs->did[4] = 0x00000005; + + // TODO: MLR + // The firmware read/write status is a "virtual" switch and + // will be handled elsewhere. Until then hard-code to + // read/write instead of read-only for developer mode. + gnvs->chromeos.vbt2 = ACTIVE_ECFW_RW; + + // the lid is open by default. + gnvs->lids = 1; + +#if CONFIG_CHROMEOS + // TODO(reinauer) this could move elsewhere? + chromeos_init_vboot(&(gnvs->chromeos)); +#endif + + acpi_update_thermal_table(gnvs); + +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 2, IO_APIC_ADDR, 0); + + /* INT_SRC_OVR */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); + + return current; +} + +unsigned long acpi_fill_ssdt_generator(unsigned long current, + const char *oem_table_id) +{ + generate_cpu_entries(); + return (unsigned long) (acpigen_get_current()); +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} + +#define ALIGN_CURRENT current = ((current + 0x0f) & -0x10) +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + int i; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_xsdt_t *xsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_mcfg_t *mcfg; + acpi_fadt_t *fadt; + acpi_facs_t *facs; +#if CONFIG_HAVE_ACPI_SLIC + acpi_header_t *slic; +#endif + acpi_header_t *ssdt; + acpi_header_t *dsdt; + + current = start; + + /* Align ACPI tables to 16byte */ + ALIGN_CURRENT; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx.\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + ALIGN_CURRENT; + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + ALIGN_CURRENT; + xsdt = (acpi_xsdt_t *) current; + current += sizeof(acpi_xsdt_t); + ALIGN_CURRENT; + + /* clear all table memory */ + memset((void *) start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, xsdt); + acpi_write_rsdt(rsdt); + acpi_write_xsdt(xsdt); + + printk(BIOS_DEBUG, "ACPI: * FACS\n"); + facs = (acpi_facs_t *) current; + current += sizeof(acpi_facs_t); + ALIGN_CURRENT; + acpi_create_facs(facs); + + printk(BIOS_DEBUG, "ACPI: * DSDT\n"); + dsdt = (acpi_header_t *) current; + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + + ALIGN_CURRENT; + + printk(BIOS_DEBUG, "ACPI: * FADT\n"); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + ALIGN_CURRENT; + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + /* + * We explicitly add these tables later on: + */ + printk(BIOS_DEBUG, "ACPI: * HPET\n"); + + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + ALIGN_CURRENT; + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + printk(BIOS_DEBUG, "ACPI: * MADT\n"); + + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + ALIGN_CURRENT; + acpi_add_table(rsdp, madt); + + printk(BIOS_DEBUG, "ACPI: * MCFG\n"); + mcfg = (acpi_mcfg_t *) current; + acpi_create_mcfg(mcfg); + current += mcfg->header.length; + ALIGN_CURRENT; + acpi_add_table(rsdp, mcfg); + + /* Pack GNVS into the ACPI table area */ + for (i=0; i < dsdt->length; i++) { + if (*(u32*)(((u32)dsdt) + i) == 0xC0DEBABE) { + printk(BIOS_DEBUG, "ACPI: Patching up global NVS in " + "DSDT at offset 0x%04x -> 0x%08lx\n", i, current); + *(u32*)(((u32)dsdt) + i) = current; // 0x92 bytes + acpi_save_gnvs(current); + break; + } + } + + /* And fill it */ + acpi_create_gnvs((global_nvs_t *)current); + + /* And tell SMI about it */ + smm_setup_structures((void *)current, NULL, NULL); + + current += sizeof(global_nvs_t); + ALIGN_CURRENT; + + /* We patched up the DSDT, so we need to recalculate the checksum */ + dsdt->checksum = 0; + dsdt->checksum = acpi_checksum((void *)dsdt, dsdt->length); + + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, + dsdt->length); + +#if CONFIG_HAVE_ACPI_SLIC + printk(BIOS_DEBUG, "ACPI: * SLIC\n"); + slic = (acpi_header_t *)current; + current += acpi_create_slic(current); + ALIGN_CURRENT; + acpi_add_table(rsdp, slic); +#endif + + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); + ssdt = (acpi_header_t *)current; + acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); + current += ssdt->length; + acpi_add_table(rsdp, ssdt); + ALIGN_CURRENT; + + printk(BIOS_DEBUG, "current = %lx\n", current); + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/google/butterfly/chromeos.c b/src/mainboard/google/butterfly/chromeos.c new file mode 100644 index 0000000000..41abd95ca9 --- /dev/null +++ b/src/mainboard/google/butterfly/chromeos.c @@ -0,0 +1,171 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011-2012 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <vendorcode/google/chromeos/chromeos.h> +#include <arch/io.h> +#ifdef __PRE_RAM__ +#include <arch/romcc_io.h> +#else +#include <device/device.h> +#include <device/pci.h> +#endif + +#include <southbridge/intel/bd82x6x/pch.h> +#include <ec/quanta/ene_kb3940q/ec.h> +#include "ec.h" + +#define ACTIVE_LOW 0 +#define ACTIVE_HIGH 1 +#define WP_GPIO 6 +#define DEVMODE_GPIO 54 +#define FORCE_RECOVERY_MODE 0 +#define FORCE_DEVELOPER_MODE 0 + + +int get_pch_gpio(unsigned char gpio_num); + +#ifndef __PRE_RAM__ +#include <boot/coreboot_tables.h> +#include <arch/coreboot_tables.h> + +#define GPIO_COUNT 6 + +void fill_lb_gpios(struct lb_gpios *gpios) +{ + device_t dev = dev_find_slot(0, PCI_DEVFN(0x1f,0)); + u16 gpio_base = pci_read_config16(dev, GPIOBASE) & 0xfffe; + + int lidswitch=0; + if (!gpio_base) + return; + + gpios->size = sizeof(*gpios) + (GPIO_COUNT * sizeof(struct lb_gpio)); + gpios->count = GPIO_COUNT; + + /* Write Protect: GPIO active Low */ + gpios->gpios[0].port = WP_GPIO; + gpios->gpios[0].polarity = ACTIVE_LOW; + gpios->gpios[0].value = get_pch_gpio(WP_GPIO); + strncpy((char *)gpios->gpios[0].name,"write protect", + GPIO_MAX_NAME_LENGTH); + + /* Recovery: virtual GPIO active high */ + gpios->gpios[1].port = -1; + gpios->gpios[1].polarity = ACTIVE_HIGH; + gpios->gpios[1].value = get_recovery_mode_switch(); + strncpy((char *)gpios->gpios[1].name,"recovery", GPIO_MAX_NAME_LENGTH); + + /* Developer: virtual GPIO active high */ + gpios->gpios[2].port = -1; + gpios->gpios[2].polarity = ACTIVE_HIGH; + gpios->gpios[2].value = get_developer_mode_switch(); + strncpy((char *)gpios->gpios[2].name,"developer", + GPIO_MAX_NAME_LENGTH); + + /* lid switch value from EC */ + lidswitch = (ec_mem_read(EC_HW_GPI_STATUS) >> EC_GPI_LID_STAT_BIT) & 1; + gpios->gpios[3].port = -1; + gpios->gpios[3].polarity = ACTIVE_HIGH; + gpios->gpios[3].value = lidswitch; + strncpy((char *)gpios->gpios[3].name,"lid", GPIO_MAX_NAME_LENGTH); + printk(BIOS_DEBUG,"LID SWITCH FROM EC: %x\n", lidswitch); + + /* Power Button - Hardcode Low as power button may still be pressed + when read here.*/ + gpios->gpios[4].port = -1; + gpios->gpios[4].polarity = ACTIVE_HIGH; + gpios->gpios[4].value = 0; + strncpy((char *)gpios->gpios[4].name,"power", GPIO_MAX_NAME_LENGTH); + + /* Was VGA Option ROM loaded? */ + gpios->gpios[5].port = -1; /* Indicate that this is a pseudo GPIO */ + gpios->gpios[5].polarity = ACTIVE_HIGH; + gpios->gpios[5].value = oprom_is_loaded; + strncpy((char *)gpios->gpios[5].name,"oprom", GPIO_MAX_NAME_LENGTH); + +} +#endif + +int get_pch_gpio(unsigned char gpio_num) +{ + device_t dev; + int retval = 0; + +#ifdef __PRE_RAM__ + dev = PCI_DEV(0, 0x1f, 0); +#else + dev = dev_find_slot(0, PCI_DEVFN(0x1f,0)); +#endif + u16 gpio_base = pci_read_config16(dev, GPIOBASE) & 0xfffe; + + if (!gpio_base) + return(0); + + if (gpio_num > 64){ + u32 gp_lvl3 = inl(gpio_base + GP_LVL3); + retval = ((gp_lvl3 >> (gpio_num - 64)) & 1); + } else if (gpio_num > 32){ + u32 gp_lvl2 = inl(gpio_base + GP_LVL2); + retval = ((gp_lvl2 >> (gpio_num - 32)) & 1); + } else { + u32 gp_lvl = inl(gpio_base + GP_LVL); + retval = ((gp_lvl >> gpio_num) & 1); + } + + return retval; +} + +int get_developer_mode_switch(void) +{ + int dev_mode = 0; + +#if FORCE_DEVELOPER_MODE + printk(BIOS_DEBUG,"FORCING DEVELOPER MODE.\n"); + return 1; +#endif + + /* Servo GPIO is active low, reverse it for intial state (request) */ + dev_mode = !get_pch_gpio(DEVMODE_GPIO); + printk(BIOS_DEBUG,"DEVELOPER MODE FROM GPIO %d: %x\n",DEVMODE_GPIO, + dev_mode); + + return dev_mode; +} + +int get_recovery_mode_switch(void) +{ + int ec_rec_mode = 0; + +#if FORCE_RECOVERY_MODE + printk(BIOS_DEBUG,"FORCING RECOVERY MODE.\n"); + return 1; +#endif + + +#ifndef __PRE_RAM__ + if (ec_mem_read(EC_CODE_STATE) == EC_COS_EC_RO) { + ec_rec_mode = 1; + } + printk(BIOS_DEBUG,"RECOVERY MODE FROM EC: %x\n", ec_rec_mode); +#endif + + return ec_rec_mode; +} diff --git a/src/mainboard/google/butterfly/cmos.layout b/src/mainboard/google/butterfly/cmos.layout new file mode 100644 index 0000000000..afdd3c66ca --- /dev/null +++ b/src/mainboard/google/butterfly/cmos.layout @@ -0,0 +1,139 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +# coreboot config options: cpu +400 1 e 2 hyper_threading +#401 7 r 0 unused + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail +#411 5 r 0 unused + +# coreboot config options: bootloader +#Used by ChromeOS: +416 128 r 0 vbnv +#544 440 r 0 unused + +# SandyBridge MRC Scrambler Seed values +896 32 r 0 mrc_scrambler_seed +928 32 r 0 mrc_scrambler_seed_s3 + +# coreboot config options: check sums +984 16 h 0 check_sum +#1000 24 r 0 amd_reserved + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +# ----------------------------------------------------------------- +checksums + +checksum 392 415 984 + + diff --git a/src/mainboard/google/butterfly/devicetree.cb b/src/mainboard/google/butterfly/devicetree.cb new file mode 100644 index 0000000000..d4e2ccdfa1 --- /dev/null +++ b/src/mainboard/google/butterfly/devicetree.cb @@ -0,0 +1,105 @@ +chip northbridge/intel/sandybridge + + # Enable DisplayPort Hotplug with 6ms pulse + register "gpu_dp_d_hotplug" = "0x06" + + + # Enable Panel as LVDS and configure power delays + register "gpu_panel_port_select" = "0" # LVDS + register "gpu_panel_power_cycle_delay" = "6" # T7: 500ms + register "gpu_panel_power_up_delay" = "100" # T1+T2: 10ms + register "gpu_panel_power_down_delay" = "100" # T5+T6: 10ms + register "gpu_panel_power_backlight_on_delay" = "2100" # T3: 210ms + register "gpu_panel_power_backlight_off_delay" = "2100" # T4: 210ms + + device lapic_cluster 0 on + chip cpu/intel/socket_rPGA989 + device lapic 0 on end + end + chip cpu/intel/model_206ax + # Magic APIC ID to locate this chip + device lapic 0xACAC off end + + # Coordinate with HW_ALL + register "pstate_coord_type" = "0xfe" + + register "c1_acpower" = "1" # ACPI(C1) = MWAIT(C1) + register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3) + register "c3_acpower" = "5" # ACPI(C3) = MWAIT(C7) + + register "c1_battery" = "1" # ACPI(C1) = MWAIT(C1) + register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3) + register "c3_battery" = "5" # ACPI(C3) = MWAIT(C7) + end + end + + device pci_domain 0 on + device pci 00.0 on end # host bridge + device pci 01.0 off end # PCIe Bridge for discrete graphics + device pci 02.0 on end # vga controller + + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "pirqa_routing" = "0x8b" + register "pirqb_routing" = "0x8a" + register "pirqc_routing" = "0x8b" + register "pirqd_routing" = "0x8b" + register "pirqe_routing" = "0x80" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x80" + + # GPI routing + # 0 No effect (default) + # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + # 2 SCI (if corresponding GPIO_EN bit is also set) + register "alt_gp_smi_en" = "0x0000" + #register "gpi1_routing" = "1" #SMI from EC + register "gpi13_routing" = "2" #SCI from EC + + register "ide_legacy_combined" = "0x0" + register "sata_ahci" = "0x1" + register "sata_port_map" = "0x3" #enable SATA ports 0 & 1 + + # Enable EC Port 0x68/0x6C + register "gen1_dec" = "0x00040069" + + # EC range is 0x380-0387 + register "gen2_dec" = "0x00040381" + + # Enable zero-based linear PCIe root port functions + register "pcie_port_coalesce" = "1" + + device pci 14.0 on end # USB 3.0 Controller + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 19.0 off end # Intel Gigabit Ethernet + device pci 1a.0 on end # USB2 EHCI #2 + device pci 1b.0 on end # High Definition Audio + device pci 1c.0 on end # PCIe Port #1 (mini PCIe Slot - WLAN & Serial debug) + device pci 1c.1 on end # PCIe Port #2 (ETH0) + device pci 1c.2 on end # PCIe Port #3 (Card Reader) + #force ASPM for PCIe bridge to Card Reader + register "pcie_aspm_f2" = "0x3" + device pci 1c.3 off end # PCIe Port #4 + device pci 1c.4 off end # PCIe Port #5 + device pci 1c.5 off end # PCIe Port #6 + device pci 1c.6 off end # PCIe Port #7 + device pci 1c.7 off end # PCIe Port #8 + device pci 1d.0 on end # USB2 EHCI #1 + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on #LPC bridge + chip ec/quanta/ene_kb3940q + # 60/64 KBC + device pnp ff.1 on # dummy address + end + end + end # LPC bridge + device pci 1f.2 on end # SATA Controller 1 + device pci 1f.3 on end # SMBus + device pci 1f.5 off end # SATA Controller 2 + device pci 1f.6 on end # Thermal + end + end +end diff --git a/src/mainboard/google/butterfly/dsdt.asl b/src/mainboard/google/butterfly/dsdt.asl new file mode 100644 index 0000000000..608827aac1 --- /dev/null +++ b/src/mainboard/google/butterfly/dsdt.asl @@ -0,0 +1,57 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20110725 // OEM revision +) +{ + // Some generic macros + #include "acpi/platform.asl" + #include "acpi/mainboard.asl" + + // global NVS and variables + #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> + + // General Purpose Events + //#include "acpi/gpe.asl" + + #include "acpi/thermal.asl" + + #include <cpu/intel/model_206ax/acpi/cpu.asl> + + Scope (\_SB) { + Device (PCI0) + { + #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> + #include <southbridge/intel/bd82x6x/acpi/pch.asl> + } + } + + #include "acpi/chromeos.asl" + #include <vendorcode/google/chromeos/acpi/chromeos.asl> + + /* Chipset specific sleep states */ + #include <southbridge/intel/bd82x6x/acpi/sleepstates.asl> +} diff --git a/src/mainboard/google/butterfly/ec.c b/src/mainboard/google/butterfly/ec.c new file mode 100644 index 0000000000..dd2298d9f4 --- /dev/null +++ b/src/mainboard/google/butterfly/ec.c @@ -0,0 +1,39 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <ec/quanta/ene_kb3940q/ec.h> +#include "ec.h" + +void butterfly_ec_init(void) +{ + printk(BIOS_DEBUG, "Butterfly EC Init\n"); + + /* Report EC info */ + /* EC version: 6 bytes */ + printk(BIOS_DEBUG," EC version: %c%c%c%c%c%c\n", + ec_mem_read(EC_FW_VER0), ec_mem_read(EC_FW_VER1), + ec_mem_read(EC_FW_VER2), ec_mem_read(EC_FW_VER3), + ec_mem_read(EC_FW_VER4), ec_mem_read(EC_FW_VER5)); + + /* Disable wake on USB, LAN & RTC */ + /* Enable Wake from Keyboard */ + ec_mem_write(EC_EC_PSW, EC_PSW_IKB); + +} diff --git a/src/mainboard/google/butterfly/ec.h b/src/mainboard/google/butterfly/ec.h new file mode 100644 index 0000000000..5bbbd5a743 --- /dev/null +++ b/src/mainboard/google/butterfly/ec.h @@ -0,0 +1,31 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef BUTTERFLY_EC_H +#define BUTTERFLY_EC_H + +#define EC_SCI_GPI 13 /* GPIO13 is EC_SCI# */ + +/* EC SMI sources TODO: MLR- make defines */ + +#ifndef __ACPI__ +extern void butterfly_ec_init(void); +#endif + +#endif // BUTTERFLY_EC_H diff --git a/src/mainboard/google/butterfly/fadt.c b/src/mainboard/google/butterfly/fadt.c new file mode 100644 index 0000000000..59e67c2948 --- /dev/null +++ b/src/mainboard/google/butterfly/fadt.c @@ -0,0 +1,169 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <device/pci.h> +#include <arch/acpi.h> + +/* FIXME: This needs to go into a separate .h file + * to be included by the ich7 smi handler, ich7 smi init + * code and the mainboard fadt. + */ +#define APM_CNT 0xb2 +#define CST_CONTROL 0x85 +#define PST_CONTROL 0x80 +#define ACPI_DISABLE 0x1e +#define ACPI_ENABLE 0xe1 +#define GNVS_UPDATE 0xea + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), + 0x40) & 0xfffe; + + memset((void *) fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = sizeof(acpi_fadt_t); + header->revision = 3; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, "CORE", 4); + header->asl_compiler_revision = 1; + + fadt->firmware_ctrl = (unsigned long) facs; + fadt->dsdt = (unsigned long) dsdt; + fadt->model = 1; + fadt->preferred_pm_profile = PM_MOBILE; + + fadt->sci_int = 0x9; + fadt->smi_cmd = APM_CNT; + fadt->acpi_enable = ACPI_ENABLE; + fadt->acpi_disable = ACPI_DISABLE; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = 0; + + fadt->pm1a_evt_blk = pmbase; + fadt->pm1b_evt_blk = 0x0; + fadt->pm1a_cnt_blk = pmbase + 0x4; + fadt->pm1b_cnt_blk = 0x0; + fadt->pm2_cnt_blk = pmbase + 0x50; + fadt->pm_tmr_blk = pmbase + 0x8; + fadt->gpe0_blk = pmbase + 0x20; + fadt->gpe1_blk = 0; + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + fadt->pm2_cnt_len = 1; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 16; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + fadt->cst_cnt = 0; + fadt->p_lvl2_lat = 101; /* c2 not supported */ + fadt->p_lvl3_lat = 87; + fadt->flush_size = 1024; + fadt->flush_stride = 16; + fadt->duty_offset = 1; + fadt->duty_width = 3; + fadt->day_alrm = 0xd; + fadt->mon_alrm = 0x00; + fadt->century = 0x00; + fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042; + + fadt->flags = ACPI_FADT_WBINVD | + ACPI_FADT_C1_SUPPORTED | + ACPI_FADT_SLEEP_BUTTON | + ACPI_FADT_RESET_REGISTER | + ACPI_FADT_SEALED_CASE | + ACPI_FADT_S4_RTC_WAKE | + ACPI_FADT_PLATFORM_CLOCK; + + fadt->reset_reg.space_id = 1; + fadt->reset_reg.bit_width = 8; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0xcf9; + fadt->reset_reg.addrh = 0; + + fadt->reset_value = 6; + fadt->x_firmware_ctl_l = (unsigned long)facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (unsigned long)dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = pmbase; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 1; + fadt->x_pm1b_evt_blk.bit_width = 0; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 16; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 1; + fadt->x_pm1b_cnt_blk.bit_width = 0; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 8; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; + fadt->x_pm_tmr_blk.addrh = 0x0; + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 64; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = pmbase + 0x20; + fadt->x_gpe0_blk.addrh = 0x0; + + fadt->x_gpe1_blk.space_id = 1; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0x0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = + acpi_checksum((void *) fadt, header->length); +} diff --git a/src/mainboard/google/butterfly/gpio.h b/src/mainboard/google/butterfly/gpio.h new file mode 100644 index 0000000000..54482998a9 --- /dev/null +++ b/src/mainboard/google/butterfly/gpio.h @@ -0,0 +1,304 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef BUTTERFLY_GPIO_H +#define BUTTERFLY_GPIO_H + +#include "southbridge/intel/bd82x6x/gpio.h" + +const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_NONE, /* Unused */ + .gpio1 = GPIO_MODE_NONE, /* Unused */ + .gpio2 = GPIO_MODE_NONE, /* Unused */ + .gpio3 = GPIO_MODE_NONE, /* Unused */ + .gpio4 = GPIO_MODE_NATIVE, /* Native - TPSINT# for TP SMBus IRQ */ + .gpio5 = GPIO_MODE_NONE, /* Unused */ + .gpio6 = GPIO_MODE_GPIO, /* Input - BOARD_ID4 */ + .gpio7 = GPIO_MODE_GPIO, /* Input - BOARD_ID5 */ + .gpio8 = GPIO_MODE_GPIO, /* Output - BT on/off */ + .gpio9 = GPIO_MODE_NONE, /* Unused */ + .gpio10 = GPIO_MODE_NONE, /* Unused */ + .gpio11 = GPIO_MODE_GPIO, /* Input - TP WAKEUP Event */ + .gpio12 = GPIO_MODE_NONE, /* Unused */ + .gpio13 = GPIO_MODE_GPIO, /* Input - SCI from EC */ + .gpio14 = GPIO_MODE_GPIO, /* Output - AOAC WLAN power control */ + .gpio15 = GPIO_MODE_GPIO, /* Unused - Do not control WLAN*/ + .gpio16 = GPIO_MODE_NONE, /* Unused */ + .gpio17 = GPIO_MODE_GPIO, /* Input - DGPU_PWROK */ + .gpio18 = GPIO_MODE_NATIVE, /* Native - PCIECLKRQ1# LAN clock pin*/ + .gpio19 = GPIO_MODE_GPIO, /* Input - Boot BIOS Selection 0 */ + .gpio20 = GPIO_MODE_NATIVE, /* Native - PCIECLKRQ2# SDCard clock pin */ + .gpio21 = GPIO_MODE_GPIO, /* Input - EC_ENTERING_RW for Google OS */ + .gpio22 = GPIO_MODE_GPIO, /* Input - BIOS RECOVERY */ + .gpio23 = GPIO_MODE_NONE, /* Unused */ + .gpio24 = GPIO_MODE_GPIO, /* Output - DGPU_HOLD_RST# */ + .gpio25 = GPIO_MODE_NONE, /* Unused */ + .gpio26 = GPIO_MODE_NONE, /* Unused */ + .gpio27 = GPIO_MODE_NONE, /* Unused */ + .gpio28 = GPIO_MODE_NONE, /* Unused */ + .gpio29 = GPIO_MODE_NONE, /* Unused */ + .gpio30 = GPIO_MODE_NATIVE, /* Native - SUSWARN_EC# */ + .gpio31 = GPIO_MODE_NONE, /* Unused */ +}; + +const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, /* Unused */ + .gpio1 = GPIO_DIR_INPUT, /* Unused */ + .gpio2 = GPIO_DIR_INPUT, /* Unused */ + .gpio3 = GPIO_DIR_INPUT, /* Unused */ + .gpio4 = GPIO_DIR_INPUT, /* Native */ + .gpio5 = GPIO_DIR_INPUT, /* Unused */ + .gpio6 = GPIO_DIR_INPUT, /* Input */ + .gpio7 = GPIO_DIR_INPUT, /* Input */ + .gpio8 = GPIO_DIR_INPUT, /* Output HIGH - set in mainboard.c */ + .gpio9 = GPIO_DIR_INPUT, /* Unused */ + .gpio10 = GPIO_DIR_INPUT, /* Unused */ + .gpio11 = GPIO_DIR_INPUT, /* Input */ + .gpio12 = GPIO_DIR_INPUT, /* Unused */ + .gpio13 = GPIO_DIR_INPUT, /* Input */ + .gpio14 = GPIO_DIR_OUTPUT, /* Output HIGH */ + .gpio15 = GPIO_DIR_INPUT, /* Unused */ + .gpio16 = GPIO_DIR_INPUT, /* Unused */ + .gpio17 = GPIO_DIR_INPUT, /* Input */ + .gpio18 = GPIO_DIR_INPUT, /* Native */ + .gpio19 = GPIO_DIR_INPUT, /* Input */ + .gpio20 = GPIO_DIR_INPUT, /* Native */ + .gpio21 = GPIO_DIR_INPUT, /* Input */ + .gpio22 = GPIO_DIR_INPUT, /* Input */ + .gpio23 = GPIO_DIR_INPUT, /* Unused */ + .gpio24 = GPIO_DIR_OUTPUT, /* Output HIGH */ + .gpio25 = GPIO_DIR_INPUT, /* Unused */ + .gpio26 = GPIO_DIR_INPUT, /* Unused */ + .gpio27 = GPIO_DIR_INPUT, /* Unused */ + .gpio28 = GPIO_DIR_INPUT, /* Unused */ + .gpio29 = GPIO_DIR_INPUT, /* Unused */ + .gpio30 = GPIO_DIR_INPUT, /* Native */ + .gpio31 = GPIO_DIR_INPUT, /* Unused */ +}; + +const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio0 = GPIO_LEVEL_LOW, /* Unused */ + .gpio1 = GPIO_LEVEL_LOW, /* Unused */ + .gpio2 = GPIO_LEVEL_LOW, /* Unused */ + .gpio3 = GPIO_LEVEL_LOW, /* Unused */ + .gpio4 = GPIO_LEVEL_LOW, /* Native */ + .gpio5 = GPIO_LEVEL_LOW, /* Unused */ + .gpio6 = GPIO_LEVEL_LOW, /* Input */ + .gpio7 = GPIO_LEVEL_LOW, /* Input */ + .gpio8 = GPIO_LEVEL_HIGH, /* Output HIGH - set in mainboard.c */ + .gpio9 = GPIO_LEVEL_LOW, /* Unused */ + .gpio10 = GPIO_LEVEL_LOW, /* Unused */ + .gpio11 = GPIO_LEVEL_LOW, /* Input */ + .gpio12 = GPIO_LEVEL_LOW, /* Unused */ + .gpio13 = GPIO_LEVEL_LOW, /* Input */ + .gpio14 = GPIO_LEVEL_HIGH, /* Output HIGH */ + .gpio15 = GPIO_LEVEL_HIGH, /* Unused */ + .gpio16 = GPIO_LEVEL_LOW, /* Unused */ + .gpio17 = GPIO_LEVEL_LOW, /* Input */ + .gpio18 = GPIO_LEVEL_LOW, /* Native */ + .gpio19 = GPIO_LEVEL_LOW, /* Input */ + .gpio20 = GPIO_LEVEL_LOW, /* Native */ + .gpio21 = GPIO_LEVEL_LOW, /* Input */ + .gpio22 = GPIO_LEVEL_LOW, /* Input */ + .gpio23 = GPIO_LEVEL_LOW, /* Unused */ + .gpio24 = GPIO_LEVEL_HIGH, /* Output HIGH */ + .gpio25 = GPIO_LEVEL_LOW, /* Unused */ + .gpio26 = GPIO_LEVEL_LOW, /* Unused */ + .gpio27 = GPIO_LEVEL_LOW, /* Unused */ + .gpio28 = GPIO_LEVEL_LOW, /* Unused */ + .gpio29 = GPIO_LEVEL_LOW, /* Unused */ + .gpio30 = GPIO_LEVEL_LOW, /* Native */ + .gpio31 = GPIO_LEVEL_LOW, /* Unused */ +}; + +const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio11 = GPIO_INVERT, /* invert touchpad wakeup pin */ + .gpio13 = GPIO_INVERT, /* invert EC SCI pin */ +}; + +const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_NATIVE, /* Native - Connect to EC Clock Run */ + .gpio33 = GPIO_MODE_GPIO, /* Input - (Google protect BIOS ROM) */ + .gpio34 = GPIO_MODE_NONE, /* Unused */ + .gpio35 = GPIO_MODE_NONE, /* Unused */ + .gpio36 = GPIO_MODE_GPIO, /* Output - DGPU_PWR_EN */ + .gpio37 = GPIO_MODE_GPIO, /* Input - FDI TERM / VOLTAGE OVERRIDE */ + .gpio38 = GPIO_MODE_GPIO, /* Input - MFG_MODE test */ + .gpio39 = GPIO_MODE_GPIO, /* Input - DGPU_PRSNT */ + .gpio40 = GPIO_MODE_NONE, /* Unused */ + .gpio41 = GPIO_MODE_NONE, /* Unused */ + .gpio42 = GPIO_MODE_NONE, /* Unused */ + .gpio43 = GPIO_MODE_NONE, /* Unused */ + .gpio44 = GPIO_MODE_GPIO, /* Input - BOARD_ID0 */ + .gpio45 = GPIO_MODE_GPIO, /* Input - BOARD_ID1 */ + .gpio46 = GPIO_MODE_GPIO, /* Input - BOARD_ID2 */ + .gpio47 = GPIO_MODE_NATIVE, /* Native - PEGA_GPU clock request */ + .gpio48 = GPIO_MODE_NONE, /* Unused */ + .gpio49 = GPIO_MODE_NONE, /* Unused */ + .gpio50 = GPIO_MODE_NONE, /* Unused */ + .gpio51 = GPIO_MODE_GPIO, /* Input - Boot BIOS Selection 1 */ + .gpio52 = GPIO_MODE_GPIO, /* Input - Google recovery, Pull up +3V */ + .gpio53 = GPIO_MODE_GPIO, /* Output - G Sensor LED */ + .gpio54 = GPIO_MODE_GPIO, /* Input - Google Development */ + .gpio55 = GPIO_MODE_GPIO, /* Input - Top-Block Swap Override */ + .gpio56 = GPIO_MODE_NONE, /* Unused */ + .gpio57 = GPIO_MODE_GPIO, /* Input - SV_DET */ + .gpio58 = GPIO_MODE_NONE, /* Unused */ + .gpio59 = GPIO_MODE_NONE, /* Unused */ + .gpio60 = GPIO_MODE_NONE, /* GPO - DRAMRST_CNTRL_PCH */ + .gpio61 = GPIO_MODE_NONE, /* Unused */ + .gpio62 = GPIO_MODE_NATIVE, /* Native - Connect to EC 32.768KHz */ + .gpio63 = GPIO_MODE_NATIVE, /* Native - SLP_S5 */ +}; + +const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio32 = GPIO_DIR_INPUT, /* Native */ + .gpio33 = GPIO_DIR_INPUT, /* Input */ + .gpio34 = GPIO_DIR_INPUT, /* Unused */ + .gpio35 = GPIO_DIR_INPUT, /* Unused */ + .gpio36 = GPIO_DIR_OUTPUT, /* Output HIGH */ + .gpio37 = GPIO_DIR_INPUT, /* Input */ + .gpio38 = GPIO_DIR_INPUT, /* Input */ + .gpio39 = GPIO_DIR_INPUT, /* Input */ + .gpio40 = GPIO_DIR_INPUT, /* Unused */ + .gpio41 = GPIO_DIR_INPUT, /* Unused */ + .gpio42 = GPIO_DIR_INPUT, /* Unused */ + .gpio43 = GPIO_DIR_INPUT, /* Unused */ + .gpio44 = GPIO_DIR_INPUT, /* Input */ + .gpio45 = GPIO_DIR_INPUT, /* Input */ + .gpio46 = GPIO_DIR_INPUT, /* Input */ + .gpio47 = GPIO_DIR_INPUT, /* Native */ + .gpio48 = GPIO_DIR_INPUT, /* Unused */ + .gpio49 = GPIO_DIR_INPUT, /* Unused */ + .gpio50 = GPIO_DIR_INPUT, /* Unused */ + .gpio51 = GPIO_DIR_INPUT, /* Input */ + .gpio52 = GPIO_DIR_INPUT, /* Input */ + .gpio53 = GPIO_DIR_OUTPUT, /* Input */ + .gpio54 = GPIO_DIR_INPUT, /* Input */ + .gpio55 = GPIO_DIR_INPUT, /* Input */ + .gpio56 = GPIO_DIR_INPUT, /* Unused */ + .gpio57 = GPIO_DIR_INPUT, /* Input */ + .gpio58 = GPIO_DIR_INPUT, /* Unused */ + .gpio59 = GPIO_DIR_INPUT, /* Unused */ + .gpio60 = GPIO_DIR_OUTPUT, /* Output HIGH */ + .gpio61 = GPIO_DIR_INPUT, /* Unused */ + .gpio62 = GPIO_DIR_INPUT, /* Native */ + .gpio63 = GPIO_DIR_INPUT, /* Native */ +}; + +const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio32 = GPIO_LEVEL_LOW, /* Native */ + .gpio33 = GPIO_LEVEL_LOW, /* Input */ + .gpio34 = GPIO_LEVEL_LOW, /* Unused */ + .gpio35 = GPIO_LEVEL_LOW, /* Unused */ + .gpio36 = GPIO_LEVEL_HIGH, /* Output HIGH */ + .gpio37 = GPIO_LEVEL_LOW, /* Input */ + .gpio38 = GPIO_LEVEL_LOW, /* Input */ + .gpio39 = GPIO_LEVEL_LOW, /* Input */ + .gpio40 = GPIO_LEVEL_LOW, /* Unused */ + .gpio41 = GPIO_LEVEL_LOW, /* Unused */ + .gpio42 = GPIO_LEVEL_LOW, /* Unused */ + .gpio43 = GPIO_LEVEL_LOW, /* Unused */ + .gpio44 = GPIO_LEVEL_LOW, /* Input */ + .gpio45 = GPIO_LEVEL_LOW, /* Input */ + .gpio46 = GPIO_LEVEL_LOW, /* Input */ + .gpio47 = GPIO_LEVEL_LOW, /* Native */ + .gpio48 = GPIO_LEVEL_LOW, /* Unused */ + .gpio49 = GPIO_LEVEL_LOW, /* Unused */ + .gpio50 = GPIO_LEVEL_LOW, /* Unused */ + .gpio51 = GPIO_LEVEL_LOW, /* Input */ + .gpio52 = GPIO_LEVEL_LOW, /* Input */ + .gpio53 = GPIO_LEVEL_HIGH, /* Input */ + .gpio54 = GPIO_LEVEL_LOW, /* Input */ + .gpio55 = GPIO_LEVEL_LOW, /* Input */ + .gpio56 = GPIO_LEVEL_LOW, /* Unused */ + .gpio57 = GPIO_LEVEL_LOW, /* Input */ + .gpio58 = GPIO_LEVEL_LOW, /* Unused */ + .gpio59 = GPIO_LEVEL_LOW, /* Unused */ + .gpio60 = GPIO_LEVEL_HIGH, /* Output HIGH */ + .gpio61 = GPIO_LEVEL_LOW, /* Unused */ + .gpio62 = GPIO_LEVEL_LOW, /* Native */ + .gpio63 = GPIO_LEVEL_LOW, /* Native */ +}; + +const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_NONE, /* Unused */ + .gpio65 = GPIO_MODE_NONE, /* Unused */ + .gpio66 = GPIO_MODE_NONE, /* Unused */ + .gpio67 = GPIO_MODE_NONE, /* Unused */ + .gpio68 = GPIO_MODE_GPIO, /* Input - DGPU_PWR_EN */ + .gpio69 = GPIO_MODE_NONE, /* Unused */ + .gpio70 = GPIO_MODE_NONE, /* Unused */ + .gpio71 = GPIO_MODE_NONE, /* Unused */ + .gpio72 = GPIO_MODE_NONE, /* Unused */ + .gpio73 = GPIO_MODE_NATIVE, /* Native - PCIECLKRQ0# WLAN clock request */ + .gpio74 = GPIO_MODE_NONE, /* Unused */ + .gpio75 = GPIO_MODE_GPIO, /* Input - SMB_ME1_DAT */ +}; + +const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio64 = GPIO_DIR_INPUT, /* Unused */ + .gpio65 = GPIO_DIR_INPUT, /* Unused */ + .gpio66 = GPIO_DIR_INPUT, /* Unused */ + .gpio67 = GPIO_DIR_INPUT, /* Unused */ + .gpio68 = GPIO_DIR_INPUT, /* Input */ + .gpio69 = GPIO_DIR_INPUT, /* Unused */ + .gpio70 = GPIO_DIR_INPUT, /* Unused */ + .gpio71 = GPIO_DIR_INPUT, /* Unused */ + .gpio72 = GPIO_DIR_INPUT, /* Unused */ + .gpio73 = GPIO_DIR_INPUT, /* Native */ + .gpio74 = GPIO_DIR_INPUT, /* Unused */ + .gpio75 = GPIO_DIR_INPUT, /* Input */ +}; + +const struct pch_gpio_set3 pch_gpio_set3_level = { + .gpio64 = GPIO_LEVEL_LOW, /* Unused */ + .gpio65 = GPIO_LEVEL_LOW, /* Unused */ + .gpio66 = GPIO_LEVEL_LOW, /* Unused */ + .gpio67 = GPIO_LEVEL_LOW, /* Unused */ + .gpio68 = GPIO_LEVEL_LOW, /* Input */ + .gpio69 = GPIO_LEVEL_LOW, /* Unused */ + .gpio70 = GPIO_LEVEL_LOW, /* Unused */ + .gpio71 = GPIO_LEVEL_LOW, /* Unused */ + .gpio72 = GPIO_LEVEL_LOW, /* Unused */ + .gpio73 = GPIO_LEVEL_LOW, /* Native */ + .gpio74 = GPIO_LEVEL_LOW, /* Unused */ + .gpio75 = GPIO_LEVEL_LOW, /* Input */ +}; + +const struct pch_gpio_map butterfly_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .invert = &pch_gpio_set1_invert, + + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + }, +}; +#endif diff --git a/src/mainboard/google/butterfly/hda_verb.h b/src/mainboard/google/butterfly/hda_verb.h new file mode 100644 index 0000000000..1901a6869c --- /dev/null +++ b/src/mainboard/google/butterfly/hda_verb.h @@ -0,0 +1,266 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Vendor Name : IDT + * Vendor ID : 0x111d76e5 + * Subsystem ID : 0x103c18f9 + * Revision ID : 0x100303 + */ + + +static const u32 mainboard_cim_verb_data[] = { + /* coreboot specific header */ + 0x111D76E5, // Codec Vendor / Device ID: IDT 92HD99 + 0x103C18F9, // Subsystem ID + 0x00000073, // Number of 4 dword sets + +/* Bits 31:28 - Codec Address */ +/* Bits 27:20 - NID */ +/* Bits 19:8 - Verb ID */ +/* Bits 7:0 - Payload */ + +/* NID 0x01 - NodeInfo */ + 0x001720F9, + 0x00172118, + 0x0017223C, + 0x00172310, + +/* NID 0x0A - External Microphone Connector + * Config=0x04A11020 (External,Right; MicIn,3.5mm; Black,JD; DA,Seq) + */ + 0x00A71C20, + 0x00A71D10, + 0x00A71EA1, + 0x00A71F04, + +/* NID 0x0B - Headphone Connector + * Config=0x0421101F (External,Right; HP,3.5mm; Black,JD; DA,Seq) + */ + 0x00B71C1F, + 0x00B71D10, + 0x00B71E21, + 0x00B71F04, + +/* NID 0x0C - Not connected + * Config=0x40F000F0 (N/A,N/A; Other,Unknown; Unknown,JD; DA,Seq) + */ + 0x00C71CF0, + 0x00C71D00, + 0x00C71EF0, + 0x00C71F40, + +/* NID 0x0D - Internal Speakers + * Config=0x90170110 (Fixed,Int; Speaker,Other Analog; Unknown,nJD; DA,Seq) + */ + 0x00D71C10, + 0x00D71D01, + 0x00D71E17, + 0x00D71F90, + +/* NID 0x0F - Not connected + * Config=0x40F000F0 + */ + 0x00F71CF0, + 0x00F71D00, + 0x00F71EF0, + 0x00F71F40, + +/* NID 0x11 - Internal Microphone + * Config=0xD5A30140 (Fixed internal,Top; Mic In,ATIPI; Unknown,nJD; DA,Seq) + */ + 0x01171C40, + 0x01171D01, + 0x01171EA3, + 0x01171FD5, + + /* + * Hardware EQ Parameters + * Sample Rate 88200 + */ + 0x0227A63F, 0x0227A73E, 0x0227A8EB, 0x0227A93F, + 0x0227AA3E, 0x0227ABEB, 0x0227AC00, 0x0227AD80, + 0x0227A681, 0x0227A782, 0x0227A829, 0x0227A981, + 0x0227AA82, 0x0227AB29, 0x0227AC01, 0x0227AD80, + 0x0227A63F, 0x0227A73E, 0x0227A8EB, 0x0227A93F, + 0x0227AA3E, 0x0227ABEB, 0x0227AC02, 0x0227AD80, + 0x0227A67E, 0x0227A77B, 0x0227A846, 0x0227A97E, + 0x0227AA7B, 0x0227AB46, 0x0227AC03, 0x0227AD80, + 0x0227A6C1, 0x0227A77F, 0x0227A898, 0x0227A9C1, + 0x0227AA7F, 0x0227AB98, 0x0227AC04, 0x0227AD80, + 0x0227A63E, 0x0227A7D1, 0x0227A84F, 0x0227A93E, + 0x0227AAD1, 0x0227AB4F, 0x0227AC05, 0x0227AD80, + 0x0227A683, 0x0227A7BE, 0x0227A855, 0x0227A983, + 0x0227AABE, 0x0227AB55, 0x0227AC06, 0x0227AD80, + 0x0227A63D, 0x0227A7B9, 0x0227A856, 0x0227A93D, + 0x0227AAB9, 0x0227AB56, 0x0227AC07, 0x0227AD80, + 0x0227A67C, 0x0227A741, 0x0227A8AB, 0x0227A97C, + 0x0227AA41, 0x0227ABAB, 0x0227AC08, 0x0227AD80, + 0x0227A6C3, 0x0227A775, 0x0227A85A, 0x0227A9C3, + 0x0227AA75, 0x0227AB5A, 0x0227AC09, 0x0227AD80, + 0x0227A63F, 0x0227A79E, 0x0227A829, 0x0227A93F, + 0x0227AA9E, 0x0227AB29, 0x0227AC0A, 0x0227AD80, + 0x0227A682, 0x0227A7E3, 0x0227A867, 0x0227A982, + 0x0227AAE3, 0x0227AB67, 0x0227AC0B, 0x0227AD80, + 0x0227A63E, 0x0227A74F, 0x0227A89D, 0x0227A93E, + 0x0227AA4F, 0x0227AB9D, 0x0227AC0C, 0x0227AD80, + 0x0227A67D, 0x0227A71C, 0x0227A899, 0x0227A97D, + 0x0227AA1C, 0x0227AB99, 0x0227AC0D, 0x0227AD80, + 0x0227A6C2, 0x0227A712, 0x0227A839, 0x0227A9C2, + 0x0227AA12, 0x0227AB39, 0x0227AC0E, 0x0227AD80, + 0x0227A63F, 0x0227A708, 0x0227A856, 0x0227A93F, + 0x0227AA08, 0x0227AB56, 0x0227AC0F, 0x0227AD80, + 0x0227A68E, 0x0227A7ED, 0x0227A89D, 0x0227A98E, + 0x0227AAED, 0x0227AB9D, 0x0227AC10, 0x0227AD80, + 0x0227A637, 0x0227A78F, 0x0227A853, 0x0227A937, + 0x0227AA8F, 0x0227AB53, 0x0227AC11, 0x0227AD80, + 0x0227A671, 0x0227A712, 0x0227A863, 0x0227A971, + 0x0227AA12, 0x0227AB63, 0x0227AC12, 0x0227AD80, + 0x0227A6C9, 0x0227A768, 0x0227A856, 0x0227A9C9, + 0x0227AA68, 0x0227AB56, 0x0227AC13, 0x0227AD80, + 0x0227A642, 0x0227A709, 0x0227A838, 0x0227A942, + 0x0227AA09, 0x0227AB38, 0x0227AC14, 0x0227AD80, + 0x0227A69C, 0x0227A78A, 0x0227A867, 0x0227A99C, + 0x0227AA8A, 0x0227AB67, 0x0227AC15, 0x0227AD80, + 0x0227A634, 0x0227A717, 0x0227A8E3, 0x0227A934, + 0x0227AA17, 0x0227ABE3, 0x0227AC16, 0x0227AD80, + 0x0227A663, 0x0227A775, 0x0227A899, 0x0227A963, + 0x0227AA75, 0x0227AB99, 0x0227AC17, 0x0227AD80, + 0x0227A6C9, 0x0227A7DE, 0x0227A8E5, 0x0227A9C9, + 0x0227AADE, 0x0227ABE5, 0x0227AC18, 0x0227AD80, + 0x0227A640, 0x0227A700, 0x0227A800, 0x0227A940, + 0x0227AA00, 0x0227AB00, 0x0227AC19, 0x0227AD80, + + /* + * Hardware EQ Parameters + * Sample Rate 96000 + */ + 0x0227A63F, 0x0227A74E, 0x0227A888, 0x0227A93F, + 0x0227AA4E, 0x0227AB88, 0x0227AC1A, 0x0227AD80, + 0x0227A681, 0x0227A762, 0x0227A8EE, 0x0227A981, + 0x0227AA62, 0x0227ABEE, 0x0227AC1B, 0x0227AD80, + 0x0227A63F, 0x0227A74E, 0x0227A888, 0x0227A93F, + 0x0227AA4E, 0x0227AB88, 0x0227AC1C, 0x0227AD80, + 0x0227A67E, 0x0227A79A, 0x0227A8E7, 0x0227A97E, + 0x0227AA9A, 0x0227ABE7, 0x0227AC1D, 0x0227AD80, + 0x0227A6C1, 0x0227A760, 0x0227A8C3, 0x0227A9C1, + 0x0227AA60, 0x0227ABC3, 0x0227AC1E, 0x0227AD80, + 0x0227A63E, 0x0227A7E9, 0x0227A84B, 0x0227A93E, + 0x0227AAE9, 0x0227AB4B, 0x0227AC1F, 0x0227AD80, + 0x0227A683, 0x0227A76C, 0x0227A8F2, 0x0227A983, + 0x0227AA6C, 0x0227ABF2, 0x0227AC20, 0x0227AD80, + 0x0227A63D, 0x0227A7E7, 0x0227A880, 0x0227A93D, + 0x0227AAE7, 0x0227AB80, 0x0227AC21, 0x0227AD80, + 0x0227A67C, 0x0227A793, 0x0227A80E, 0x0227A97C, + 0x0227AA93, 0x0227AB0E, 0x0227AC22, 0x0227AD80, + 0x0227A6C3, 0x0227A72F, 0x0227A835, 0x0227A9C3, + 0x0227AA2F, 0x0227AB35, 0x0227AC23, 0x0227AD80, + 0x0227A63F, 0x0227A7A5, 0x0227A8FE, 0x0227A93F, + 0x0227AAA5, 0x0227ABFE, 0x0227AC24, 0x0227AD80, + 0x0227A682, 0x0227A798, 0x0227A89D, 0x0227A982, + 0x0227AA98, 0x0227AB9D, 0x0227AC25, 0x0227AD80, + 0x0227A63E, 0x0227A772, 0x0227A839, 0x0227A93E, + 0x0227AA72, 0x0227AB39, 0x0227AC26, 0x0227AD80, + 0x0227A67D, 0x0227A767, 0x0227A863, 0x0227A97D, + 0x0227AA67, 0x0227AB63, 0x0227AC27, 0x0227AD80, + 0x0227A6C1, 0x0227A7E7, 0x0227A8C8, 0x0227A9C1, + 0x0227AAE7, 0x0227ABC8, 0x0227AC28, 0x0227AD80, + 0x0227A63F, 0x0227A71B, 0x0227A81A, 0x0227A93F, + 0x0227AA1B, 0x0227AB1A, 0x0227AC29, 0x0227AD80, + 0x0227A68D, 0x0227A763, 0x0227A872, 0x0227A98D, + 0x0227AA63, 0x0227AB72, 0x0227AC2A, 0x0227AD80, + 0x0227A638, 0x0227A733, 0x0227A809, 0x0227A938, + 0x0227AA33, 0x0227AB09, 0x0227AC2B, 0x0227AD80, + 0x0227A672, 0x0227A79C, 0x0227A88E, 0x0227A972, + 0x0227AA9C, 0x0227AB8E, 0x0227AC2C, 0x0227AD80, + 0x0227A6C8, 0x0227A7B1, 0x0227A8DD, 0x0227A9C8, + 0x0227AAB1, 0x0227ABDD, 0x0227AC2D, 0x0227AD80, + 0x0227A641, 0x0227A7E1, 0x0227A8D8, 0x0227A941, + 0x0227AAE1, 0x0227ABD8, 0x0227AC2E, 0x0227AD80, + 0x0227A699, 0x0227A70D, 0x0227A820, 0x0227A999, + 0x0227AA0D, 0x0227AB20, 0x0227AC2F, 0x0227AD80, + 0x0227A634, 0x0227A7FE, 0x0227A823, 0x0227A934, + 0x0227AAFE, 0x0227AB23, 0x0227AC30, 0x0227AD80, + 0x0227A666, 0x0227A7F2, 0x0227A8E0, 0x0227A966, + 0x0227AAF2, 0x0227ABE0, 0x0227AC31, 0x0227AD80, + 0x0227A6C9, 0x0227A720, 0x0227A804, 0x0227A9C9, + 0x0227AA20, 0x0227AB04, 0x0227AC32, 0x0227AD80, + 0x0227A640, 0x0227A700, 0x0227A800, 0x0227A940, + 0x0227AA00, 0x0227AB00, 0x0227AC33, 0x0227AD80, + + /* SAFEDSP Parameters */ + 0x022782C1, 0x02277127, 0x02277227, 0x02278801, + 0x02278C58, 0x02278E90, 0x0227890A, 0x02278A14, + 0x02278B0F, 0x0017B008, + + /* Misc entries */ + 0x00B707C0, /* Enable PortB as Output with HP amp */ + 0x00D70740, /* Enable PortD as Output */ + 0x0017A200, /* Disable ClkEn of PortSenseTst */ + 0x0017C621, /* Slave Port - Port A used as microphone input for + combo Jack + Master Port - Port B used for Jack Presence Detect + Enable Combo Jack Detection */ + 0x0017A208, /* Enable ClkEn of PortSenseTst */ + 0x00170500, /* Set power state to D0 */ + + /* --- Next Codec --- */ + +/* Vendor Name : Intel + * Vendor ID : 0x80862806 + * Subsystem ID : 0x80860101 + * Revision ID : 0x100000 + */ + /* coreboot specific header */ + 0x80862806, // Codec Vendor / Device ID: Intel PantherPoint HDMI + 0x80860101, // Subsystem ID + 0x00000004, // Number of IDs + + /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x80860101 */ + 0x30172001, + 0x30172101, + 0x30172286, + 0x30172380, + + /* Pin Complex (NID 0x05) Digital Out at Int HDMI */ + 0x30571c10, + 0x30571d00, + 0x30571e56, + 0x30571f18, + + /* Pin Complex (NID 0x06) Digital Out at Int HDMI */ + 0x30671c20, + 0x30671d00, + 0x30671e56, + 0x30671f18, + + /* Pin Complex (NID 0x07) Digital Out at Int HDMI */ + 0x30771c30, + 0x30771d00, + 0x30771e56, + 0x30771f18 +}; + +static const u32 mainboard_pc_beep_verbs[] = { + 0x02177a00, /* Digital PCBEEP Gain: 0h=-9db, 1h=-6db ... 4h=+3db, 5h=+6db */ +}; + +static const u32 mainboard_pc_beep_verbs_size = + sizeof(mainboard_pc_beep_verbs) / sizeof(mainboard_pc_beep_verbs[0]); + + diff --git a/src/mainboard/google/butterfly/mainboard.c b/src/mainboard/google/butterfly/mainboard.c new file mode 100644 index 0000000000..acab762c57 --- /dev/null +++ b/src/mainboard/google/butterfly/mainboard.c @@ -0,0 +1,507 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011-2012 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <device/device.h> +#include <device/pci_def.h> +#include <device/pci_ops.h> +#include <console/console.h> +#if defined(CONFIG_PCI_OPTION_ROM_RUN_YABEL) && CONFIG_PCI_OPTION_ROM_RUN_YABEL +#include <x86emu/x86emu.h> +#endif +#include <pc80/mc146818rtc.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <arch/interrupt.h> +#include <arch/coreboot_tables.h> +#include "hda_verb.h" +#include "onboard.h" +#include "ec.h" +#include <southbridge/intel/bd82x6x/pch.h> +#include <smbios.h> +#include <device/pci.h> +#include <ec/quanta/ene_kb3940q/ec.h> +#include <vendorcode/google/chromeos/fmap.h> + +static unsigned int search(char *p, char *a, unsigned int lengthp, + unsigned int lengtha) +{ + int i, j; + + /* Searching */ + for (j = 0; j <= lengtha - lengthp; j++) { + for (i = 0; i < lengthp && p[i] == a[i + j]; i++) ; + if (i >= lengthp) + return j; + } + return lengtha; +} + +static unsigned char get_hex_digit(char *offset) +{ + unsigned char retval = 0; + + retval = *offset - '0'; + if (retval > 0x09) { + retval = *offset - 'A' + 0x0A; + if (retval > 0x0F) + retval = *offset - 'a' + 0x0a; + } + if (retval > 0x0F) { + printk(BIOS_DEBUG, "Error: Invalid Hex digit found: %c - 0x%02x\n", + *offset, (unsigned char)*offset); + retval = 0; + } + + return retval; +} + +static int get_mac_address(u32 *high_dword, u32 *low_dword, + u32 search_address, u32 search_length) +{ + char key[] = "ethernet_mac"; + unsigned int offset; + int i; + + offset = search(key, (char *)search_address, + sizeof(key) - 1, search_length); + if (offset == search_length) { + printk(BIOS_DEBUG, + "Error: Could not locate '%s' in VPD\n", key); + return 0; + } + printk(BIOS_DEBUG, "Located '%s' in VPD\n", key); + + offset += sizeof(key); /* move to next character */ + *high_dword = 0; + + /* Fetch the MAC address and put the octets in the correct order to + * be programmed. + * + * From RTL8105E_Series_EEPROM-Less_App_Note_1.1 + * If the MAC address is 001122334455h: + * Write 33221100h to I/O register offset 0x00 via double word access + * Write 00005544h to I/O register offset 0x04 via double word access + */ + + for (i = 0; i < 4; i++) { + *high_dword |= (get_hex_digit((char *)(search_address + offset)) + << (4 + (i * 8))); + *high_dword |= (get_hex_digit((char *)(search_address + offset + 1)) + << (i * 8)); + offset += 3; + } + + *low_dword = 0; + for (i = 0; i < 2; i++) { + *low_dword |= (get_hex_digit((char *)(search_address + offset)) + << (4 + (i * 8))); + *low_dword |= (get_hex_digit((char *)(search_address + offset + 1)) + << (i * 8)); + offset += 3; + } + + return *high_dword | *low_dword; +} + +static void program_mac_address(u16 io_base, u32 search_address, + u32 search_length) +{ + /* Default MAC Address of A0:00:BA:D0:0B:AD */ + u32 high_dword = 0xD0BA00A0; /* high dword of mac address */ + u32 low_dword = 0x0000AD0B; /* low word of mac address as a dword */ + + if (search_length != -1) + get_mac_address(&high_dword, &low_dword, search_address, + search_length); + + if (io_base) { + printk(BIOS_DEBUG, "Realtek NIC io_base = 0x%04x\n", io_base); + printk(BIOS_DEBUG, "Programming MAC Address\n"); + + outb(0xc0, io_base + 0x50); /* Disable register protection */ + outl(high_dword, io_base); + outl(low_dword, io_base + 0x04); + outb(0x60, io_base + 54); + outb(0x00, io_base + 0x50); /* Enable register protection again */ + } +} + +static void program_keyboard_type(u32 search_address, u32 search_length) +{ + char key[] = "keyboard_layout"; + char kbd_jpn[] = "xkb:jp::jpn"; + unsigned int offset; + char kbd_type = EC_KBD_EN; /* Default keyboard type is English */ + + if (search_length != -1) { + + /* + * Search for keyboard_layout identifier + * The only options in the EC are Japanese or English. + * The English keyboard layout is actually used for multiple + * different languages - English, Spanish, French... Because + * of this the code only searches for Japanese, and sets the + * keyboard type to English if Japanese is not found. + */ + offset = search(key, (char *)search_address, sizeof(key) - 1, + search_length); + if (offset != search_length) { + printk(BIOS_DEBUG, "Located '%s' in VPD\n", key); + + offset += sizeof(key); /* move to next character */ + search_length = sizeof(kbd_jpn); + offset = search(kbd_jpn, (char *)(search_address + offset), + sizeof(kbd_jpn) - 1, search_length); + if (offset != search_length) + kbd_type = EC_KBD_JP; + } + } else + printk(BIOS_DEBUG, "Error: Could not locate VPD area\n"); + + + printk(BIOS_DEBUG, "Setting Keyboard type in EC to "); + printk(BIOS_DEBUG, (kbd_type == EC_KBD_JP) ? "Japanese" : "English"); + printk(BIOS_DEBUG, ".\n"); + + ec_mem_write(EC_KBID_REG, kbd_type); +} + +void mainboard_suspend_resume(void) +{ + /* Call SMM finalize() handlers before resume */ + outb(0xcb, 0xb2); +} + +#if defined(CONFIG_PCI_OPTION_ROM_RUN_REALMODE) && CONFIG_PCI_OPTION_ROM_RUN_REALMODE +static int int15_handler(struct eregs *regs) +{ + int res = -1; + + printk(BIOS_DEBUG, "%s: INT15 function %04x!\n", + __func__, regs->eax & 0xffff); + + switch (regs->eax & 0xffff) { + case 0x5f34: + /* + * Set Panel Fitting Hook: + * bit 2 = Graphics Stretching + * bit 1 = Text Stretching + * bit 0 = Centering (do not set with bit1 or bit2) + * 0 = video bios default + */ + regs->eax &= 0xffff0000; + regs->eax |= 0x005f; + regs->ecx &= 0xffffff00; + regs->ecx |= 0x00; /* Use video bios default */ + res = 0; + break; + case 0x5f35: + /* + * Boot Display Device Hook: + * bit 0 = CRT + * bit 1 = TV (eDP) + * bit 2 = EFP + * bit 3 = LFP + * bit 4 = CRT2 + * bit 5 = TV2 (eDP) + * bit 6 = EFP2 + * bit 7 = LFP2 + */ + regs->eax &= 0xffff0000; + regs->eax |= 0x005f; + regs->ecx &= 0xffff0000; + regs->ecx |= 0x0000; /* Use video bios default */ + res = 0; + break; + case 0x5f51: + /* + * Hook to select active LFP configuration: + * 00h = No LVDS, VBIOS does not enable LVDS + * 01h = Int-LVDS, LFP driven by integrated LVDS decoder + * 02h = SVDO-LVDS, LFP driven by SVDO decoder + * 03h = eDP, LFP Driven by Int-DisplayPort encoder + */ + regs->eax &= 0xffff0000; + regs->eax |= 0x005f; + regs->ecx &= 0xffff0000; + regs->ecx |= 0x0001; /* Int-LVDS */ + res = 0; + break; + case 0x5f70: + switch ((regs->ecx >> 8) & 0xff) { + case 0: + /* Get Mux */ + regs->eax &= 0xffff0000; + regs->eax |= 0x005f; + regs->ecx &= 0xffff0000; + regs->ecx |= 0x0000; + res = 0; + break; + case 1: + /* Set Mux */ + regs->eax &= 0xffff0000; + regs->eax |= 0x005f; + regs->ecx &= 0xffff0000; + regs->ecx |= 0x0000; + res = 0; + break; + case 2: + /* Get SG/Non-SG mode */ + regs->eax &= 0xffff0000; + regs->eax |= 0x005f; + regs->ecx &= 0xffff0000; + regs->ecx |= 0x0000; + res = 0; + break; + default: + /* Interrupt was not handled */ + printk(BIOS_DEBUG, "Unknown INT15 5f70 function: 0x%02x\n", + ((regs->ecx >> 8) & 0xff)); + return 0; + } + break; + + default: + printk(BIOS_DEBUG, "Unknown INT15 function %04x!\n", + regs->eax & 0xffff); + break; + } + return res; +} +#endif + +#if defined(CONFIG_PCI_OPTION_ROM_RUN_YABEL) && CONFIG_PCI_OPTION_ROM_RUN_YABEL +static int int15_handler(void) +{ + printk(BIOS_DEBUG, "%s: AX=%04x BX=%04x CX=%04x DX=%04x\n", + __func__, M.x86.R_AX, M.x86.R_BX, M.x86.R_CX, M.x86.R_DX); + + switch (M.x86.R_AX) { + case 0x5f34: + /* + * Set Panel Fitting Hook: + * bit 2 = Graphics Stretching + * bit 1 = Text Stretching + * bit 0 = Centering (do not set with bit1 or bit2) + */ + M.x86.R_AX = 0x005f; + M.x86.R_CX = 0x00; + break; + case 0x5f35: + /* + * Boot Display Device Hook: + * bit 0 = CRT + * bit 1 = TV (eDP) + * bit 2 = EFP + * bit 3 = LFP + * bit 4 = CRT2 + * bit 5 = TV2 (eDP) + * bit 6 = EFP2 + * bit 7 = LFP2 + */ + M.x86.R_AX = 0x005f; + M.x86.R_CX = 0x0000; /* Use video bios default */ + break; + case 0x5f51: + /* + * Hook to select active LFP configuration: + * 00h = No LVDS, VBIOS does not enable LVDS + * 01h = Int-LVDS, LFP driven by integrated LVDS decoder + * 02h = SVDO-LVDS, LFP driven by SVDO decoder + * 03h = eDP, LFP Driven by Int-DisplayPort encoder + */ + M.x86.R_AX = 0x005f; + M.x86.R_CX = 1; /* Int-LVDS */ + break; + case 0x5f70: + switch (M.x86.R_CH) { + case 0: + /* Get Mux */ + M.x86.R_AX = 0x005f; + M.x86.R_CL = 0; + break; + case 1: + /* Set Mux */ + M.x86.R_AX = 0x005f; + M.x86.R_CX = 0; + break; + case 2: + /* Get SG/Non-SG mode */ + M.x86.R_AX = 0x005f; + M.x86.R_CX = 0; + break; + default: + /* Interrupt was not handled */ + printk(BIOS_DEBUG, "Unknown INT15 5f70 function: 0x%02x\n", + M.x86.R_CH); + return 0; + } + break; + default: + /* Interrupt was not handled */ + printk(BIOS_DEBUG, "Unknown INT15 function: 0x%04x\n", + M.x86.R_AX); + return 0; + } + + /* Interrupt handled */ + return 1; +} +#endif + +#if CONFIG_PCI_OPTION_ROM_RUN_YABEL || CONFIG_PCI_OPTION_ROM_RUN_REALMODE +static void int15_install(void) +{ +#if CONFIG_PCI_OPTION_ROM_RUN_YABEL + typedef int (*yabel_handleIntFunc)(void); + extern yabel_handleIntFunc yabel_intFuncArray[256]; + yabel_intFuncArray[0x15] = int15_handler; +#endif +#ifdef CONFIG_PCI_OPTION_ROM_RUN_REALMODE + mainboard_interrupt_handlers(0x15, &int15_handler); +#endif +} +#endif + +/* Audio Setup */ + +extern const u32 *cim_verb_data; +extern u32 cim_verb_data_size; +extern const u32 *pc_beep_verbs; +extern u32 pc_beep_verbs_size; + +static void verb_setup(void) +{ + cim_verb_data = mainboard_cim_verb_data; + cim_verb_data_size = sizeof(mainboard_cim_verb_data); + pc_beep_verbs = mainboard_pc_beep_verbs; + pc_beep_verbs_size = mainboard_pc_beep_verbs_size; + +} + +static void mainboard_init(device_t dev) +{ + char **vpd_region_ptr = NULL; + u32 search_length = find_fmap_entry("RO_VPD", (void **)vpd_region_ptr); + u32 search_address = (unsigned long)(*vpd_region_ptr); + u16 io_base = 0; + struct device *ethernet_dev = NULL; + + /* Initialize the Embedded Controller */ + butterfly_ec_init(); + + /* Program EC Keyboard locale based on VPD data */ + program_keyboard_type(search_address, search_length); + + /* Get NIC's IO base address */ + ethernet_dev = dev_find_device(BUTTERFLY_NIC_VENDOR_ID, + BUTTERFLY_NIC_DEVICE_ID, dev); + if (ethernet_dev != NULL) { + io_base = pci_read_config16(ethernet_dev, 0x10) & 0xfffe; + + /* + * Battery life time - LAN PCIe should enter ASPM L1 to save + * power when LAN connection is idle. + * enable CLKREQ: LAN pci config space 0x81h=01 + */ + pci_write_config8(ethernet_dev, 0x81, 0x01); + } + + if (io_base) { + /* Program MAC address based on VPD data */ + program_mac_address(io_base, search_address, search_length); + + /* + * Program NIC LEDS + * + * RTL8105E Series EEPROM-Less Application Note, + * Section 5.6 LED Mode Configuration + * + * Step1: Write C0h to I/O register 0x50 via byte access to + * disable 'register protection' + * Step2: Write xx001111b to I/O register 0x52 via byte access + * (bit7 is LEDS1 and bit6 is LEDS0) + * Step3: Write 0x00 to I/O register 0x50 via byte access to + * enable 'register protection' + */ + outb(0xc0, io_base + 0x50); /* Disable protection */ + outb((BUTTERFLY_NIC_LED_MODE << 6) | 0x0f, io_base + 0x52); + outb(0x00, io_base + 0x50); /* Enable register protection */ + } +} + +static int butterfly_smbios_type41(int *handle, unsigned long *current, + const char *name, u8 irq, u8 addr) +{ + struct smbios_type41 *t = (struct smbios_type41 *)*current; + int len = sizeof(struct smbios_type41); + + memset(t, 0, sizeof(struct smbios_type41)); + t->type = SMBIOS_ONBOARD_DEVICES_EXTENDED_INFORMATION; + t->handle = *handle; + t->length = len - 2; + t->reference_designation = smbios_add_string(t->eos, name); + t->device_type = SMBIOS_DEVICE_TYPE_OTHER; + t->device_status = 1; + t->device_type_instance = irq; + t->segment_group_number = 0; + t->bus_number = addr; + t->function_number = 0; + t->device_number = 0; + + len = t->length + smbios_string_table_len(t->eos); + *current += len; + *handle += 1; + return len; +} + +static int butterfly_onboard_smbios_data(device_t dev, int *handle, + unsigned long *current) +{ + int len = 0; + + len += butterfly_smbios_type41(handle, current, + BUTTERFLY_TRACKPAD_NAME, + BUTTERFLY_TRACKPAD_IRQ, + BUTTERFLY_TRACKPAD_I2C_ADDR); + + return len; +} + +// mainboard_enable is executed as first thing after +// enumerate_buses(). + +static void mainboard_enable(device_t dev) +{ + dev->ops->init = mainboard_init; + dev->ops->get_smbios_data = butterfly_onboard_smbios_data; +#if CONFIG_PCI_OPTION_ROM_RUN_YABEL || CONFIG_PCI_OPTION_ROM_RUN_REALMODE + /* Install custom int15 handler for VGA OPROM */ + int15_install(); +#endif + verb_setup(); +} + +struct chip_operations mainboard_ops = { + CHIP_NAME("Google Butterfly ChromeBook") + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/google/butterfly/mainboard_smi.c b/src/mainboard/google/butterfly/mainboard_smi.c new file mode 100644 index 0000000000..4e02a3cd7f --- /dev/null +++ b/src/mainboard/google/butterfly/mainboard_smi.c @@ -0,0 +1,115 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <arch/romcc_io.h> +#include <console/console.h> +#include <cpu/x86/smm.h> +#include <southbridge/intel/bd82x6x/nvs.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <southbridge/intel/bd82x6x/me.h> +#include <northbridge/intel/sandybridge/sandybridge.h> +#include <cpu/intel/model_206ax/model_206ax.h> + +/* Include EC functions */ +#include <ec/quanta/ene_kb3940q/ec.h> +#include "ec.h" + +int mainboard_io_trap_handler(int smif) +{ + printk(BIOS_DEBUG, "mainboard_io_trap_handler: %x\n", smif); + switch (smif) { + case 0x99: + printk(BIOS_DEBUG, "Sample\n"); + smm_get_gnvs()->smif = 0; + break; + default: + return 0; + } + + /* On success, the IO Trap Handler returns 0 + * On failure, the IO Trap Handler returns a value != 0 + * + * For now, we force the return value to 0 and log all traps to + * see what's going on. + */ + //gnvs->smif = 0; + return 1; +} + +void mainboard_smi_gpi(u16 gpi_sts) +{ + printk(BIOS_DEBUG, "warn: unknown mainboard_smi_gpi: %x\n", gpi_sts); +} + +void mainboard_smi_sleep(u8 slp_typ) +{ + printk(BIOS_DEBUG, "mainboard_smi_sleep: %x\n", slp_typ); + + /* Tell the EC to Enable USB power for S3 if requested */ + if (smm_get_gnvs()->s3u0 != 0 || smm_get_gnvs()->s3u1 != 0) + ec_mem_write(EC_EC_PSW, ec_mem_read(EC_EC_PSW) | EC_PSW_USB); + + /* Disable wake on USB, LAN & RTC */ + /* Enable Wake from Keyboard */ + if ((slp_typ == 4) || (slp_typ == 5)) { + printk(BIOS_DEBUG, "Disabling wake on RTC\n"); + ec_mem_write(EC_EC_PSW, EC_PSW_IKB); + } +} + +#define APMC_FINALIZE 0xcb +#define APMC_ACPI_EN 0xe1 +#define APMC_ACPI_DIS 0x1e + +static int mainboard_finalized = 0; + +int mainboard_smi_apmc(u8 apmc) +{ + printk(BIOS_DEBUG, "mainboard_smi_apmc: %x\n", apmc); + switch (apmc) { + case APMC_FINALIZE: + printk(BIOS_DEBUG, "APMC: FINALIZE\n"); + if (mainboard_finalized) { + printk(BIOS_DEBUG, "APMC#: Already finalized\n"); + return 0; + } + + intel_me_finalize_smm(); + intel_pch_finalize_smm(); + intel_sandybridge_finalize_smm(); + intel_model_206ax_finalize_smm(); + + mainboard_finalized = 1; + break; + + case APMC_ACPI_EN: + printk(BIOS_DEBUG, "APMC: ACPI_EN\n"); + /* Clear all pending events and enable SCI */ + ec_write_cmd(EC_CMD_ENABLE_ACPI_MODE); + break; + + case APMC_ACPI_DIS: + printk(BIOS_DEBUG, "APMC: ACPI_DIS\n"); + /* Clear all pending events and tell the EC that ACPI is disabled */ + ec_write_cmd(EC_CMD_DISABLE_ACPI_MODE); + break; + } + return 0; +} diff --git a/src/mainboard/google/butterfly/onboard.h b/src/mainboard/google/butterfly/onboard.h new file mode 100644 index 0000000000..e32e0237ef --- /dev/null +++ b/src/mainboard/google/butterfly/onboard.h @@ -0,0 +1,36 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef BUTTERFLY_ONBOARD_H +#define BUTTERFLY_ONBOARD_H + +#include <arch/smp/mpspec.h> +/* uses 7-bit I2C address */ +/* must be set to edge triggered */ +#define BUTTERFLY_TRACKPAD_NAME "trackpad" +#define BUTTERFLY_TRACKPAD_I2C_ADDR 0x67 +#define BUTTERFLY_TRACKPAD_IRQ 22 /* PIRQG - 22 Edge triggered */ + +/* defines for programming the MAC address */ +#define BUTTERFLY_NIC_VENDOR_ID 0x10EC +#define BUTTERFLY_NIC_DEVICE_ID 0x8136 + +/* 0x00: White LINK LED and Amber ACTIVE LED */ +#define BUTTERFLY_NIC_LED_MODE 0x00 +#endif diff --git a/src/mainboard/google/butterfly/romstage.c b/src/mainboard/google/butterfly/romstage.c new file mode 100644 index 0000000000..352f8d65eb --- /dev/null +++ b/src/mainboard/google/butterfly/romstage.c @@ -0,0 +1,307 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <lib.h> +#include <timestamp.h> +#include <arch/byteorder.h> +#include <arch/io.h> +#include <arch/romcc_io.h> +#include <device/pci_def.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <cbmem.h> +#include <console/console.h> +#include "northbridge/intel/sandybridge/sandybridge.h" +#include "northbridge/intel/sandybridge/raminit.h" +#include "southbridge/intel/bd82x6x/pch.h" +#include "southbridge/intel/bd82x6x/gpio.h" +#include <arch/cpu.h> +#include <cpu/x86/bist.h> +#include <cpu/x86/msr.h> +#include "gpio.h" +#if CONFIG_CHROMEOS +#include <vendorcode/google/chromeos/chromeos.h> +#endif +#include <cbfs.h> + +static void pch_enable_lpc(void) +{ + /* EC Decode Range Port60/64 and Port62/66 */ + /* Enable EC and PS/2 Keyboard/Mouse*/ + pci_write_config16(PCH_LPC_DEV, LPC_EN, KBC_LPC_EN | MC_LPC_EN); + + /* EC Decode Range Port68/6C */ + pci_write_config32(PCH_LPC_DEV, LPC_GEN1_DEC, (0x68 & ~3) | 0x40001); + + /* EC Decode Range Port 380-387 */ + pci_write_config32(PCH_LPC_DEV, LPC_GEN2_DEC, 0x380 | 0x40001); + +} + +static void rcba_config(void) +{ + u32 reg32; + + /* + * GFX INTA -> PIRQA (MSI) + * D28IP_P1IP WLAN INTA -> PIRQB + * D28IP_P2IP ETH0 INTB -> PIRQF + * D28IP_P3IP SDCARD INTC -> PIRQD + * D29IP_E1P EHCI1 INTA -> PIRQD + * D26IP_E2P EHCI2 INTA -> PIRQF + * D31IP_SIP SATA INTA -> PIRQB (MSI) + * D31IP_SMIP SMBUS INTB -> PIRQH + * D31IP_TTIP THRT INTC -> PIRQA + * D27IP_ZIP HDA INTA -> PIRQA (MSI) + * + * Trackpad interrupt is edge triggered and cannot be shared. + * TRACKPAD -> PIRQG + + */ + + /* Device interrupt pin register (board specific) */ + RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); + RCBA32(D29IP) = (INTA << D29IP_E1P); + RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTB << D28IP_P2IP) | + (INTC << D28IP_P3IP); + RCBA32(D27IP) = (INTA << D27IP_ZIP); + RCBA32(D26IP) = (INTA << D26IP_E2P); + RCBA32(D25IP) = (NOINT << D25IP_LIP); + RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); + + /* Device interrupt route registers */ + DIR_ROUTE(D31IR, PIRQB, PIRQH, PIRQA, PIRQC); + DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); + DIR_ROUTE(D28IR, PIRQB, PIRQF, PIRQD, PIRQE); + DIR_ROUTE(D27IR, PIRQA, PIRQH, PIRQA, PIRQB); + DIR_ROUTE(D26IR, PIRQF, PIRQE, PIRQG, PIRQH); + DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); + + /* Enable IOAPIC (generic) */ + RCBA16(OIC) = 0x0100; + /* PCH BWG says to read back the IOAPIC enable register */ + (void) RCBA16(OIC); + + /* Disable unused devices (board specific) */ + reg32 = RCBA32(FD); + reg32 |= PCH_DISABLE_ALWAYS; + /* Disable PCI bridge so MRC does not probe this bus */ + reg32 |= PCH_DISABLE_P2P; + RCBA32(FD) = reg32; +} + +void main(unsigned long bist) +{ + int boot_mode = 0; + int cbmem_was_initted; + u32 pm1_cnt; + u16 pm1_sts; + +#if CONFIG_COLLECT_TIMESTAMPS + tsc_t start_romstage_time; + tsc_t before_dram_time; + tsc_t after_dram_time; + tsc_t base_time = { + .lo = pci_read_config32(PCI_DEV(0, 0x00, 0), 0xdc), + .hi = pci_read_config32(PCI_DEV(0, 0x1f, 2), 0xd0) + }; +#endif + struct pei_data pei_data = { + pei_version: PEI_VERSION, + mchbar: DEFAULT_MCHBAR, + dmibar: DEFAULT_DMIBAR, + epbar: DEFAULT_EPBAR, + pciexbar: CONFIG_MMCONF_BASE_ADDRESS, + smbusbar: SMBUS_IO_BASE, + wdbbar: 0x4000000, + wdbsize: 0x1000, + hpet_address: CONFIG_HPET_ADDRESS, + rcba: DEFAULT_RCBABASE, + pmbase: DEFAULT_PMBASE, + gpiobase: DEFAULT_GPIOBASE, + thermalbase: 0xfed08000, + system_type: 0, // 0 Mobile, 1 Desktop/Server + tseg_size: CONFIG_SMM_TSEG_SIZE, + spd_addresses: { 0xA0, 0x00,0xA4,0x00 }, + ts_addresses: { 0x00, 0x00, 0x00, 0x00 }, + ec_present: 1, + ddr3lv_support: 0, + // 0 = leave channel enabled + // 1 = disable dimm 0 on channel + // 2 = disable dimm 1 on channel + // 3 = disable dimm 0+1 on channel + dimm_channel0_disabled: 2, + dimm_channel1_disabled: 2, + max_ddr3_freq: 1600, + usb_port_config: { + /* enabled usb oc pin length */ + { 1, 0, 0x0040 }, /* P0: Right USB 3.0 #1 (no OC) */ + { 1, 0, 0x0040 }, /* P1: Right USB 3.0 #2 (no OC) */ + { 1, 0, 0x0040 }, /* P2: Camera (no OC) */ + { 0, 0, 0x0000 }, /* P3: Empty */ + { 0, 0, 0x0000 }, /* P4: Empty */ + { 0, 0, 0x0000 }, /* P5: Empty */ + { 0, 0, 0x0000 }, /* P6: Empty */ + { 0, 0, 0x0000 }, /* P7: Empty */ + { 0, 4, 0x0000 }, /* P8: Empty */ + { 1, 4, 0x0080 }, /* P9: Left USB 1 (no OC) */ + { 1, 4, 0x0040 }, /* P10: Mini PCIe - WLAN / BT (no OC) */ + { 0, 4, 0x0000 }, /* P11: Empty */ + { 0, 4, 0x0000 }, /* P12: Empty */ + { 0, 4, 0x0000 }, /* P13: Empty */ + }, + }; + +#if CONFIG_COLLECT_TIMESTAMPS + start_romstage_time = rdtsc(); +#endif + + if (bist == 0) + enable_lapic(); + + pch_enable_lpc(); + + /* Enable GPIOs */ + pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE|1); + pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10); + setup_pch_gpios(&butterfly_gpio_map); + + /* Initialize console device(s) */ + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + if (MCHBAR16(SSKPD) == 0xCAFE) { + printk(BIOS_DEBUG, "soft reset detected\n"); + boot_mode = 1; + + /* System is not happy after keyboard reset... */ + printk(BIOS_DEBUG, "Issuing CF9 warm reset\n"); + outb(0x6, 0xcf9); + hlt(); + } + + /* Perform some early chipset initialization required + * before RAM initialization can work + */ + sandybridge_early_initialization(SANDYBRIDGE_MOBILE); + printk(BIOS_DEBUG, "Back from sandybridge_early_initialization()\n"); + + /* Check PM1_STS[15] to see if we are waking from Sx */ + pm1_sts = inw(DEFAULT_PMBASE + PM1_STS); + + /* Read PM1_CNT[12:10] to determine which Sx state */ + pm1_cnt = inl(DEFAULT_PMBASE + PM1_CNT); + + if ((pm1_sts & WAK_STS) && ((pm1_cnt >> 10) & 7) == 5) { +#if CONFIG_HAVE_ACPI_RESUME + printk(BIOS_DEBUG, "Resume from S3 detected.\n"); + boot_mode = 2; + /* Clear SLP_TYPE. This will break stage2 but + * we care for that when we get there. + */ + outl(pm1_cnt & ~(7 << 10), DEFAULT_PMBASE + PM1_CNT); +#else + printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); +#endif + } + + post_code(0x38); + /* Enable SPD ROMs and DDR-III DRAM */ + enable_smbus(); + + /* Prepare USB controller early in S3 resume */ + if (boot_mode == 2) + enable_usb_bar(); + + post_code(0x39); + + post_code(0x3a); + pei_data.boot_mode = boot_mode; +#if CONFIG_COLLECT_TIMESTAMPS + before_dram_time = rdtsc(); +#endif + sdram_initialize(&pei_data); + +#if CONFIG_COLLECT_TIMESTAMPS + after_dram_time = rdtsc(); +#endif + post_code(0x3c); + + rcba_config(); + post_code(0x3d); + + quick_ram_check(); + post_code(0x3e); + + MCHBAR16(SSKPD) = 0xCAFE; +#if CONFIG_EARLY_CBMEM_INIT + cbmem_was_initted = !cbmem_initialize(); +#else + cbmem_was_initted = cbmem_reinit((uint64_t) (get_top_of_ram() + - HIGH_MEMORY_SIZE)); +#endif + +#if CONFIG_HAVE_ACPI_RESUME + /* If there is no high memory area, we didn't boot before, so + * this is not a resume. In that case we just create the cbmem toc. + */ + + *(u32 *)CBMEM_BOOT_MODE = 0; + *(u32 *)CBMEM_RESUME_BACKUP = 0; + + if ((boot_mode == 2) && cbmem_was_initted) { + void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME); + if (resume_backup_memory) { + *(u32 *)CBMEM_BOOT_MODE = boot_mode; + *(u32 *)CBMEM_RESUME_BACKUP = (u32)resume_backup_memory; + } + /* Magic for S3 resume */ + pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafed00d); + } else if (boot_mode == 2) { + /* Failed S3 resume, reset to come up cleanly */ + outb(0x6, 0xcf9); + hlt(); + } else { + pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafebabe); + } +#endif + post_code(0x3f); +#if CONFIG_CHROMEOS + init_chromeos(boot_mode); +#endif +#if CONFIG_COLLECT_TIMESTAMPS + timestamp_init(base_time); + timestamp_add(TS_START_ROMSTAGE, start_romstage_time ); + timestamp_add(TS_BEFORE_INITRAM, before_dram_time ); + timestamp_add(TS_AFTER_INITRAM, after_dram_time ); + timestamp_add_now(TS_END_ROMSTAGE); +#endif +#if CONFIG_CONSOLE_CBMEM + /* Keep this the last thing this function does. */ + cbmemc_reinit(); +#endif +} diff --git a/src/mainboard/google/butterfly/thermal.h b/src/mainboard/google/butterfly/thermal.h new file mode 100644 index 0000000000..c8ff1f409d --- /dev/null +++ b/src/mainboard/google/butterfly/thermal.h @@ -0,0 +1,31 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef BUTTERFLY_THERMAL_H +#define BUTTERFLY_THERMAL_H + +/* Active Thermal and fans are controlled by the EC. */ + + /* Temperature which OS will shutdown at */ + #define CRITICAL_TEMPERATURE 100 + + /* Temperature which OS will throttle CPU */ + #define PASSIVE_TEMPERATURE 90 + +#endif |