diff options
Diffstat (limited to 'src')
-rw-r--r-- | src/mainboard/intel/minnowmax/devicetree.cb | 50 |
1 files changed, 25 insertions, 25 deletions
diff --git a/src/mainboard/intel/minnowmax/devicetree.cb b/src/mainboard/intel/minnowmax/devicetree.cb index 72849d6dfd..6e456cb1e6 100644 --- a/src/mainboard/intel/minnowmax/devicetree.cb +++ b/src/mainboard/intel/minnowmax/devicetree.cb @@ -21,8 +21,8 @@ chip soc/intel/fsp_baytrail #### ACPI Register Settings #### - register "fadt_pm_profile" = "PM_UNSPECIFIED" - register "fadt_boot_arch" = "ACPI_FADT_LEGACY_FREE" + register "fadt_pm_profile" = "PM_UNSPECIFIED" + register "fadt_boot_arch" = "ACPI_FADT_LEGACY_FREE" #### FSP register settings #### register "PcdSataMode" = "SATA_MODE_AHCI" @@ -34,25 +34,25 @@ chip soc/intel/fsp_baytrail register "PcdApertureSize" = "APERTURE_SIZE_DEFAULT" register "PcdGttSize" = "GTT_SIZE_DEFAULT" register "PcdLpssSioEnablePciMode" = "LPSS_PCI_MODE_DEFAULT" - register "AzaliaAutoEnable" = "AZALIA_FOLLOWS_DEVICETREE" - register "LpeAcpiModeEnable" = "LPE_ACPI_MODE_DISABLED" - register "IgdRenderStandby" = "IGD_RENDER_STANDBY_ENABLE" - register "EnableMemoryDown" = "MEMORY_DOWN_ENABLE" - register "DRAMSpeed" = "DRAM_SPEED_1066MHZ" - register "DRAMType" = "DRAM_TYPE_DDR3L" - register "DIMM0Enable" = "DIMM0_ENABLE" - register "DIMM1Enable" = "DIMM1_DISABLE" - register "DIMMDWidth" = "DIMM_DWIDTH_X16" - register "DIMMDensity" = "DIMM_DENSITY_2G_BIT" - register "DIMMBusWidth" = "DIMM_BUS_WIDTH_64BIT" - register "DIMMSides" = "DIMM_SIDES_1RANK" - register "DIMMtCL" = "11" - register "DIMMtRPtRCD" = "11" - register "DIMMtWR" = "12" - register "DIMMtWTR" = "6" - register "DIMMtRRD" = "6" - register "DIMMtRTP" = "6" - register "DIMMtFAW" = "20" + register "AzaliaAutoEnable" = "AZALIA_FOLLOWS_DEVICETREE" + register "LpeAcpiModeEnable" = "LPE_ACPI_MODE_DISABLED" + register "IgdRenderStandby" = "IGD_RENDER_STANDBY_ENABLE" + register "EnableMemoryDown" = "MEMORY_DOWN_ENABLE" + register "DRAMSpeed" = "DRAM_SPEED_1066MHZ" + register "DRAMType" = "DRAM_TYPE_DDR3L" + register "DIMM0Enable" = "DIMM0_ENABLE" + register "DIMM1Enable" = "DIMM1_DISABLE" + register "DIMMDWidth" = "DIMM_DWIDTH_X16" + register "DIMMDensity" = "DIMM_DENSITY_2G_BIT" # Setting for 1GB board - modified runtime for 2GB board in romstage.c to DIMM_DENSITY_4G_BIT + register "DIMMBusWidth" = "DIMM_BUS_WIDTH_64BIT" + register "DIMMSides" = "DIMM_SIDES_1RANK" + register "DIMMtCL" = "11" + register "DIMMtRPtRCD" = "11" + register "DIMMtWR" = "12" + register "DIMMtWTR" = "6" + register "DIMMtRRD" = "6" + register "DIMMtRTP" = "6" + register "DIMMtFAW" = "20" device cpu_cluster 0 on device lapic 0 on end @@ -67,12 +67,12 @@ chip soc/intel/fsp_baytrail device pci 11.0 off end # 8086 0F15 - SDIO Port - device pci 12.0 on end # 8086 0F16 - SD Port MicroSD on SD3 device pci 13.0 on end # 8086 0F23 - SATA AHCI Onboard & HSEC - device pci 14.0 on end # 8086 0F35 - USB XHCI Onboard & HSEC + device pci 14.0 on end # 8086 0F35 - USB XHCI - Onboard & HSEC - Enabling both EHCI and XHCI will default to EHCI if not changed at runtime device pci 15.0 on end # 8086 0F28 - LP Engine Audio LSEC device pci 17.0 off end # 8086 0F50 - MMC Port - device pci 18.0 on end # 8086 0F40 - SIO - DMA - device pci 18.1 off end # 8086 0F41 - I2C Port 1 (0) - - device pci 18.2 off end # 8086 0F42 - I2C Port 2 (1) - (testpoints) + device pci 18.2 on end # 8086 0F42 - I2C Port 2 (1) - (testpoints) device pci 18.3 off end # 8086 0F43 - I2C Port 3 (2) - device pci 18.4 off end # 8086 0F44 - I2C Port 4 (3) - device pci 18.5 off end # 8086 0F45 - I2C Port 5 (4) - @@ -80,11 +80,11 @@ chip soc/intel/fsp_baytrail device pci 18.7 on end # 8086 0F47 - I2C Port 7 (6) HSEC device pci 1a.0 on end # 8086 0F18 - TXE - device pci 1b.0 off end # 8086 0F04 - HD Audio - - device pci 1c.0 off end # 8086 0F48 - PCIe Port 1 (0) - + device pci 1c.0 on end # 8086 0F48 - PCIe Port 1 (0) - device pci 1c.1 off end # 8086 0F4A - PCIe Port 2 (1) - device pci 1c.2 on end # 8086 0F4C - PCIe Port 3 (2) Onboard GBE device pci 1c.3 on end # 8086 0F4E - PCIe Port 4 (3) HSEC - device pci 1d.0 off end # 8086 0F34 - USB EHCI - + device pci 1d.0 on end # 8086 0F34 - USB EHCI - Enabling both EHCI and XHCI will default to EHCI if not changed at runtime device pci 1e.0 on end # 8086 0F06 - SIO - DMA - device pci 1e.1 on end # 8086 0F08 - PWM 1 LSEC device pci 1e.2 on end # 8086 0F09 - PWM 2 LSEC |