summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/superio/ite/it8659e/it8659e.h20
-rw-r--r--src/superio/ite/it8772f/Makefile.mk3
-rw-r--r--src/superio/ite/it8772f/early_init.c63
-rw-r--r--src/superio/ite/it8772f/it8772f.h38
4 files changed, 0 insertions, 124 deletions
diff --git a/src/superio/ite/it8659e/it8659e.h b/src/superio/ite/it8659e/it8659e.h
index 4fa91e9cfb..f6eda0749d 100644
--- a/src/superio/ite/it8659e/it8659e.h
+++ b/src/superio/ite/it8659e/it8659e.h
@@ -11,24 +11,4 @@
#define IT8659E_GPIO 0x07 /* GPIO */
#define IT8659E_CIR 0x0A /* CIR */
-/* GPIO Polarity Select: 1: Inverting, 0: Non-inverting */
-#define GPIO_REG_POLARITY(x) (0xb0 + (x))
-#define GPIO_POL_NO_INVERT 0
-#define GPIO_POL_INVERT 1
-
-/* GPIO Internal Pull-up: 1: Enable, 0: Disable */
-#define GPIO_REG_PULLUP(x) (0xb8 + (x))
-#define GPIO_PULLUP_DIS 0
-#define GPIO_PULLUP_EN 1
-
-/* GPIO Function Select: 1: Simple I/O, 0: Alternate function */
-#define GPIO_REG_ENABLE(x) (0xc0 + (x))
-#define GPIO_ALT_FN 0
-#define GPIO_SIMPLE_IO 1
-
-/* GPIO Mode: 0: input mode, 1: output mode */
-#define GPIO_REG_OUTPUT(x) (0xc8 + (x))
-#define GPIO_INPUT_MODE 0
-#define GPIO_OUTPUT_MODE 1
-
#endif /* SUPERIO_ITE_IT8659E_H */
diff --git a/src/superio/ite/it8772f/Makefile.mk b/src/superio/ite/it8772f/Makefile.mk
index a96a8627b1..93ea16d898 100644
--- a/src/superio/ite/it8772f/Makefile.mk
+++ b/src/superio/ite/it8772f/Makefile.mk
@@ -1,6 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-or-later
-bootblock-$(CONFIG_SUPERIO_ITE_IT8772F) += early_init.c
-romstage-$(CONFIG_SUPERIO_ITE_IT8772F) += early_init.c
ramstage-$(CONFIG_SUPERIO_ITE_IT8772F) += superio.c
-smm-$(CONFIG_SUPERIO_ITE_IT8772F) += early_init.c
diff --git a/src/superio/ite/it8772f/early_init.c b/src/superio/ite/it8772f/early_init.c
deleted file mode 100644
index efbb035aab..0000000000
--- a/src/superio/ite/it8772f/early_init.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <device/pnp_ops.h>
-
-#include "it8772f.h"
-#include "../common/ite.h"
-
-#define IT8772F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */
-
-/* NOTICE: This file is deprecated, use ite/common instead */
-
-static void it8772f_enter_conf(pnp_devfn_t dev)
-{
- u16 port = dev >> 8;
-
- outb(0x87, port);
- outb(0x01, port);
- outb(0x55, port);
- outb((port == 0x4e) ? 0xaa : 0x55, port);
-}
-
-static void it8772f_exit_conf(pnp_devfn_t dev)
-{
- pnp_write_config(dev, IT8772F_CONFIG_REG_CC, 0x02);
-}
-
-/* Configure a set of GPIOs */
-void it8772f_gpio_setup(pnp_devfn_t dev, int set, u8 select, u8 polarity,
- u8 pullup, u8 output, u8 enable)
-{
- set--; /* Set 1 is offset 0 */
- it8772f_enter_conf(dev);
- pnp_set_logical_device(dev);
- if (set < 5) {
- pnp_write_config(dev, GPIO_REG_SELECT(set), select);
- pnp_write_config(dev, GPIO_REG_ENABLE(set), enable);
- pnp_write_config(dev, GPIO_REG_POLARITY(set), polarity);
- }
- pnp_write_config(dev, GPIO_REG_OUTPUT(set), output);
- pnp_write_config(dev, GPIO_REG_PULLUP(set), pullup);
- it8772f_exit_conf(dev);
-}
-
-/* Configure LED GPIOs */
-void it8772f_gpio_led(pnp_devfn_t dev,int set, u8 select, u8 polarity, u8 pullup,
- u8 output, u8 enable, u8 led_pin_map, u8 led_freq)
-{
- set--; /* Set 1 is offset 0 */
- it8772f_enter_conf(dev);
- pnp_set_logical_device(dev);
- if (set < 5) {
- pnp_write_config(dev, IT8772F_GPIO_LED_BLINK1_PINMAP, led_pin_map);
- pnp_write_config(dev, IT8772F_GPIO_LED_BLINK1_CONTROL, led_freq);
- pnp_write_config(dev, GPIO_REG_SELECT(set), select);
- pnp_write_config(dev, GPIO_REG_ENABLE(set), enable);
- pnp_write_config(dev, GPIO_REG_POLARITY(set), polarity);
- }
- pnp_write_config(dev, GPIO_REG_OUTPUT(set), output);
- pnp_write_config(dev, GPIO_REG_PULLUP(set), pullup);
- it8772f_exit_conf(dev);
-}
diff --git a/src/superio/ite/it8772f/it8772f.h b/src/superio/ite/it8772f/it8772f.h
index 4df21c58cb..f2869233c7 100644
--- a/src/superio/ite/it8772f/it8772f.h
+++ b/src/superio/ite/it8772f/it8772f.h
@@ -11,42 +11,4 @@
#define IT8772F_GPIO 0x07 /* GPIO */
#define IT8772F_IR 0x0a /* Consumer IR */
-
-/* GPIO interface */
-#define IT8772F_GPIO_LED_BLINK1_PINMAP 0xf8
-
-#define SIO_GPIO_BLINK_GPIO10 0x08
-#define SIO_GPIO_BLINK_GPIO22 0x12
-#define SIO_GPIO_BLINK_GPIO45 0x25
-
-#define IT8772F_GPIO_LED_BLINK1_CONTROL 0xf9
-
-#define IT8772F_GPIO_BLINK_FREQUENCY_4_HZ (0<<1)
-#define IT8772F_GPIO_BLINK_FREQUENCY_1_HZ (1<<1)
-#define IT8772F_GPIO_BLINK_FREQUENCY_1_4_HZ (2<<1)
-#define IT8772F_GPIO_BLINK_FREQUENCY_1_8_HZ (3<<1)
-
-#define GPIO_REG_SELECT(x) (0x25 + (x))
-
-/* GPIO Polarity Select: 1: Inverting, 0: Non-inverting */
-#define GPIO_REG_POLARITY(x) (0xb0 + (x))
-
-/* GPIO Internal Pull-up: 1: Enable, 0: Disable */
-#define GPIO_REG_PULLUP(x) (0xb8 + (x))
-
-/* GPIO Function Select: 1: Simple I/O, 0: Alternate function */
-#define GPIO_REG_ENABLE(x) (0xc0 + (x))
-
-/* GPIO Mode: 0: input mode, 1: output mode */
-#define GPIO_REG_OUTPUT(x) (0xc8 + (x))
-
-#include <device/pnp_type.h>
-#include <stdint.h>
-
-void it8772f_gpio_setup(pnp_devfn_t dev, int set, u8 select, u8 polarity,
- u8 pullup, u8 output, u8 enable);
-
-void it8772f_gpio_led(pnp_devfn_t dev, int set, u8 select, u8 polarity, u8 pullup,
- u8 output, u8 enable, u8 led_pin_map, u8 led_freq);
-
#endif /* SUPERIO_ITE_IT8772F_H */
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 13:26:12 +0000