diff options
Diffstat (limited to 'src')
15 files changed, 20 insertions, 134 deletions
diff --git a/src/mainboard/google/brya/variants/anahera/overridetree.cb b/src/mainboard/google/brya/variants/anahera/overridetree.cb index f2d863a8fd..c9b3bd8045 100644 --- a/src/mainboard/google/brya/variants/anahera/overridetree.cb +++ b/src/mainboard/google/brya/variants/anahera/overridetree.cb @@ -22,17 +22,6 @@ fw_config end end chip soc/intel/alderlake - # This disables autonomous GPIO power management, otherwise - # old cr50 FW only supports short pulses; need to clarify - # the minimum PCH IRQ pulse width with Intel, b/180111628 - register "gpio_override_pm" = "1" - register "gpio_pm[COMM_0]" = "0" - register "gpio_pm[COMM_1]" = "0" - register "gpio_pm[COMM_2]" = "0" - register "gpio_pm[COMM_3]" = "0" - register "gpio_pm[COMM_4]" = "0" - register "gpio_pm[COMM_5]" = "0" - register "SaGv" = "SaGv_Enabled" # Intel Common SoC Config #+-------------------+---------------------------+ diff --git a/src/mainboard/google/brya/variants/anahera4es/overridetree.cb b/src/mainboard/google/brya/variants/anahera4es/overridetree.cb index 616224d09e..0b6db9f95e 100644 --- a/src/mainboard/google/brya/variants/anahera4es/overridetree.cb +++ b/src/mainboard/google/brya/variants/anahera4es/overridetree.cb @@ -22,17 +22,6 @@ fw_config end end chip soc/intel/alderlake - # This disables autonomous GPIO power management, otherwise - # old cr50 FW only supports short pulses; need to clarify - # the minimum PCH IRQ pulse width with Intel, b/180111628 - register "gpio_override_pm" = "1" - register "gpio_pm[COMM_0]" = "0" - register "gpio_pm[COMM_1]" = "0" - register "gpio_pm[COMM_2]" = "0" - register "gpio_pm[COMM_3]" = "0" - register "gpio_pm[COMM_4]" = "0" - register "gpio_pm[COMM_5]" = "0" - register "SaGv" = "SaGv_Enabled" # Intel Common SoC Config #+-------------------+---------------------------+ diff --git a/src/mainboard/google/brya/variants/baseboard/brask/devicetree.cb b/src/mainboard/google/brya/variants/baseboard/brask/devicetree.cb index d9a4e42c04..a7328a9bbe 100644 --- a/src/mainboard/google/brya/variants/baseboard/brask/devicetree.cb +++ b/src/mainboard/google/brya/variants/baseboard/brask/devicetree.cb @@ -71,6 +71,16 @@ chip soc/intel/alderlake # FIVR RFI Spread Spectrum 1.5% register "FivrSpreadSpectrum" = "FIVR_SS_1_5" + # This disables autonomous GPIO power management, otherwise + # old cr50 FW only supports short pulses. + register "gpio_override_pm" = "1" + register "gpio_pm[COMM_0]" = "0" + register "gpio_pm[COMM_1]" = "0" + register "gpio_pm[COMM_2]" = "0" + register "gpio_pm[COMM_3]" = "0" + register "gpio_pm[COMM_4]" = "0" + register "gpio_pm[COMM_5]" = "0" + # Intel Common SoC Config #+-------------------+---------------------------+ #| Field | Value | diff --git a/src/mainboard/google/brya/variants/baseboard/brya/devicetree.cb b/src/mainboard/google/brya/variants/baseboard/brya/devicetree.cb index b330e98040..7323b106c7 100644 --- a/src/mainboard/google/brya/variants/baseboard/brya/devicetree.cb +++ b/src/mainboard/google/brya/variants/baseboard/brya/devicetree.cb @@ -75,6 +75,16 @@ chip soc/intel/alderlake # FIVR RFI Spread Spectrum 1.5% register "FivrSpreadSpectrum" = "FIVR_SS_1_5" + # This disables autonomous GPIO power management, otherwise old cr50 FW + # only supports short pulses and they can be missed by the PCH. + register "gpio_override_pm" = "1" + register "gpio_pm[COMM_0]" = "0" + register "gpio_pm[COMM_1]" = "0" + register "gpio_pm[COMM_2]" = "0" + register "gpio_pm[COMM_3]" = "0" + register "gpio_pm[COMM_4]" = "0" + register "gpio_pm[COMM_5]" = "0" + # Intel Common SoC Config #+-------------------+---------------------------+ #| Field | Value | diff --git a/src/mainboard/google/brya/variants/brask/overridetree.cb b/src/mainboard/google/brya/variants/brask/overridetree.cb index b7e9fef7ae..d60183bcb7 100644 --- a/src/mainboard/google/brya/variants/brask/overridetree.cb +++ b/src/mainboard/google/brya/variants/brask/overridetree.cb @@ -1,14 +1,4 @@ chip soc/intel/alderlake - # This disables autonomous GPIO power management, otherwise - # old cr50 FW only supports short pulses; need to clarify - # the minimum PCH IRQ pulse width with Intel, b/180111628 - register "gpio_override_pm" = "1" - register "gpio_pm[COMM_0]" = "0" - register "gpio_pm[COMM_1]" = "0" - register "gpio_pm[COMM_2]" = "0" - register "gpio_pm[COMM_3]" = "0" - register "gpio_pm[COMM_4]" = "0" - register "gpio_pm[COMM_5]" = "0" device domain 0 on device ref dtt on chip drivers/intel/dptf diff --git a/src/mainboard/google/brya/variants/gimble/overridetree.cb b/src/mainboard/google/brya/variants/gimble/overridetree.cb index 91ae8005f9..401909b43f 100644 --- a/src/mainboard/google/brya/variants/gimble/overridetree.cb +++ b/src/mainboard/google/brya/variants/gimble/overridetree.cb @@ -21,16 +21,6 @@ fw_config end end chip soc/intel/alderlake - # This disabled autonomous GPIO power management, otherwise - # old cr50 FW only supports short pulses; need to clarify - # the minimum PCH IRQ pulse width with Intel, b/180111628 - register "gpio_override_pm" = "1" - register "gpio_pm[COMM_0]" = "0" - register "gpio_pm[COMM_1]" = "0" - register "gpio_pm[COMM_2]" = "0" - register "gpio_pm[COMM_3]" = "0" - register "gpio_pm[COMM_4]" = "0" - register "gpio_pm[COMM_5]" = "0" register "SaGv" = "SaGv_Enabled" register "PsysPmax" = "143" register "TcssAuxOri" = "1" diff --git a/src/mainboard/google/brya/variants/gimble4es/overridetree.cb b/src/mainboard/google/brya/variants/gimble4es/overridetree.cb index 5b022f642c..0b29e4d02d 100644 --- a/src/mainboard/google/brya/variants/gimble4es/overridetree.cb +++ b/src/mainboard/google/brya/variants/gimble4es/overridetree.cb @@ -21,16 +21,6 @@ fw_config end end chip soc/intel/alderlake - # This disabled autonomous GPIO power management, otherwise - # old cr50 FW only supports short pulses; need to clarify - # the minimum PCH IRQ pulse width with Intel, b/180111628 - register "gpio_override_pm" = "1" - register "gpio_pm[COMM_0]" = "0" - register "gpio_pm[COMM_1]" = "0" - register "gpio_pm[COMM_2]" = "0" - register "gpio_pm[COMM_3]" = "0" - register "gpio_pm[COMM_4]" = "0" - register "gpio_pm[COMM_5]" = "0" register "SaGv" = "SaGv_Enabled" register "PsysPmax" = "143" register "TcssAuxOri" = "1" diff --git a/src/mainboard/google/brya/variants/primus/overridetree.cb b/src/mainboard/google/brya/variants/primus/overridetree.cb index 7ef832cc5d..a12de65622 100644 --- a/src/mainboard/google/brya/variants/primus/overridetree.cb +++ b/src/mainboard/google/brya/variants/primus/overridetree.cb @@ -23,16 +23,6 @@ fw_config end chip soc/intel/alderlake - # This disabled autonomous GPIO power management, otherwise - # old cr50 FW only supports short pulses; need to clarify - # the minimum PCH IRQ pulse width with Intel, b/180111628 - register "gpio_override_pm" = "1" - register "gpio_pm[COMM_0]" = "0" - register "gpio_pm[COMM_1]" = "0" - register "gpio_pm[COMM_2]" = "0" - register "gpio_pm[COMM_3]" = "0" - register "gpio_pm[COMM_4]" = "0" - register "gpio_pm[COMM_5]" = "0" register "SaGv" = "SaGv_Enabled" register "MaxDramSpeed" = "3733" # Acoustic settings diff --git a/src/mainboard/google/brya/variants/primus4es/overridetree.cb b/src/mainboard/google/brya/variants/primus4es/overridetree.cb index 75610b87b2..dc0dfbfb22 100644 --- a/src/mainboard/google/brya/variants/primus4es/overridetree.cb +++ b/src/mainboard/google/brya/variants/primus4es/overridetree.cb @@ -23,16 +23,6 @@ fw_config end chip soc/intel/alderlake - # This disabled autonomous GPIO power management, otherwise - # old cr50 FW only supports short pulses; need to clarify - # the minimum PCH IRQ pulse width with Intel, b/180111628 - register "gpio_override_pm" = "1" - register "gpio_pm[COMM_0]" = "0" - register "gpio_pm[COMM_1]" = "0" - register "gpio_pm[COMM_2]" = "0" - register "gpio_pm[COMM_3]" = "0" - register "gpio_pm[COMM_4]" = "0" - register "gpio_pm[COMM_5]" = "0" register "SaGv" = "SaGv_Enabled" register "MaxDramSpeed" = "3733" # Acoustic settings diff --git a/src/mainboard/google/brya/variants/redrix/overridetree.cb b/src/mainboard/google/brya/variants/redrix/overridetree.cb index 013ec09d71..a94f33325b 100644 --- a/src/mainboard/google/brya/variants/redrix/overridetree.cb +++ b/src/mainboard/google/brya/variants/redrix/overridetree.cb @@ -31,16 +31,6 @@ fw_config end end chip soc/intel/alderlake - # This disables autonomous GPIO power management, otherwise - # old cr50 FW only supports short pulses; need to clarify - # the minimum PCH IRQ pulse width with Intel, b/180111628 - register "gpio_override_pm" = "1" - register "gpio_pm[COMM_0]" = "0" - register "gpio_pm[COMM_1]" = "0" - register "gpio_pm[COMM_2]" = "0" - register "gpio_pm[COMM_3]" = "0" - register "gpio_pm[COMM_4]" = "0" - register "gpio_pm[COMM_5]" = "0" register "SaGv" = "SaGv_Enabled" register "CnviBtAudioOffload" = "true" # FIVR RFI Spread Spectrum 6% diff --git a/src/mainboard/google/brya/variants/redrix4es/overridetree.cb b/src/mainboard/google/brya/variants/redrix4es/overridetree.cb index a31d025897..0abad3d7f1 100644 --- a/src/mainboard/google/brya/variants/redrix4es/overridetree.cb +++ b/src/mainboard/google/brya/variants/redrix4es/overridetree.cb @@ -31,16 +31,6 @@ fw_config end end chip soc/intel/alderlake - # This disables autonomous GPIO power management, otherwise - # old cr50 FW only supports short pulses; need to clarify - # the minimum PCH IRQ pulse width with Intel, b/180111628 - register "gpio_override_pm" = "1" - register "gpio_pm[COMM_0]" = "0" - register "gpio_pm[COMM_1]" = "0" - register "gpio_pm[COMM_2]" = "0" - register "gpio_pm[COMM_3]" = "0" - register "gpio_pm[COMM_4]" = "0" - register "gpio_pm[COMM_5]" = "0" register "SaGv" = "SaGv_Enabled" register "CnviBtAudioOffload" = "true" # FIVR RFI Spread Spectrum 6% diff --git a/src/mainboard/google/brya/variants/taeko/overridetree.cb b/src/mainboard/google/brya/variants/taeko/overridetree.cb index 5cdc066dbf..c1c567e7fa 100644 --- a/src/mainboard/google/brya/variants/taeko/overridetree.cb +++ b/src/mainboard/google/brya/variants/taeko/overridetree.cb @@ -39,16 +39,6 @@ fw_config end end chip soc/intel/alderlake - # This disabled autonomous GPIO power management, otherwise - # old cr50 FW only supports short pulses; need to clarify - # the minimum PCH IRQ pulse width with Intel, b/180111628 - register "gpio_override_pm" = "1" - register "gpio_pm[COMM_0]" = "0" - register "gpio_pm[COMM_1]" = "0" - register "gpio_pm[COMM_2]" = "0" - register "gpio_pm[COMM_3]" = "0" - register "gpio_pm[COMM_4]" = "0" - register "gpio_pm[COMM_5]" = "0" register "ext_fivr_settings" = "{ .configure_ext_fivr = 1, .v1p05_enable_bitmap = FIVR_ENABLE_ALL_SX, diff --git a/src/mainboard/google/brya/variants/taeko4es/overridetree.cb b/src/mainboard/google/brya/variants/taeko4es/overridetree.cb index 8aaeab7b71..5b7b49708e 100644 --- a/src/mainboard/google/brya/variants/taeko4es/overridetree.cb +++ b/src/mainboard/google/brya/variants/taeko4es/overridetree.cb @@ -39,16 +39,6 @@ fw_config end end chip soc/intel/alderlake - # This disabled autonomous GPIO power management, otherwise - # old cr50 FW only supports short pulses; need to clarify - # the minimum PCH IRQ pulse width with Intel, b/180111628 - register "gpio_override_pm" = "1" - register "gpio_pm[COMM_0]" = "0" - register "gpio_pm[COMM_1]" = "0" - register "gpio_pm[COMM_2]" = "0" - register "gpio_pm[COMM_3]" = "0" - register "gpio_pm[COMM_4]" = "0" - register "gpio_pm[COMM_5]" = "0" register "ext_fivr_settings" = "{ .configure_ext_fivr = 1, .v1p05_enable_bitmap = FIVR_ENABLE_ALL_SX, diff --git a/src/mainboard/google/brya/variants/taniks/overridetree.cb b/src/mainboard/google/brya/variants/taniks/overridetree.cb index eb1680e0dc..4b97a48b44 100644 --- a/src/mainboard/google/brya/variants/taniks/overridetree.cb +++ b/src/mainboard/google/brya/variants/taniks/overridetree.cb @@ -36,16 +36,6 @@ fw_config end end chip soc/intel/alderlake - # This disabled autonomous GPIO power management, otherwise - # old cr50 FW only supports short pulses; need to clarify - # the minimum PCH IRQ pulse width with Intel, b/180111628 - register "gpio_override_pm" = "1" - register "gpio_pm[COMM_0]" = "0" - register "gpio_pm[COMM_1]" = "0" - register "gpio_pm[COMM_2]" = "0" - register "gpio_pm[COMM_3]" = "0" - register "gpio_pm[COMM_4]" = "0" - register "gpio_pm[COMM_5]" = "0" register "ext_fivr_settings" = "{ .configure_ext_fivr = 1, .v1p05_enable_bitmap = FIVR_ENABLE_ALL_SX, diff --git a/src/mainboard/google/brya/variants/vell/overridetree.cb b/src/mainboard/google/brya/variants/vell/overridetree.cb index fe929b5fd3..034d496bb9 100644 --- a/src/mainboard/google/brya/variants/vell/overridetree.cb +++ b/src/mainboard/google/brya/variants/vell/overridetree.cb @@ -22,18 +22,6 @@ fw_config end end chip soc/intel/alderlake - # This disables autonomous GPIO power management, otherwise - # old cr50 FW only supports short pulses; need to clarify - # the minimum PCH IRQ pulse width with Intel, b/180111628 - register "gpio_override_pm" = "1" - register "gpio_pm[COMM_0]" = "0" - register "gpio_pm[COMM_1]" = "0" - register "gpio_pm[COMM_2]" = "0" - register "gpio_pm[COMM_3]" = "0" - register "gpio_pm[COMM_4]" = "0" - register "gpio_pm[COMM_5]" = "0" - register "SaGv" = "SaGv_Enabled" - # Intel Common SoC Config #+-------------------+---------------------------+ #| Field | Value | |