diff options
Diffstat (limited to 'src')
11 files changed, 385 insertions, 0 deletions
diff --git a/src/mainboard/google/dedede/Kconfig b/src/mainboard/google/dedede/Kconfig index e237b80cc7..e1bc9ad789 100644 --- a/src/mainboard/google/dedede/Kconfig +++ b/src/mainboard/google/dedede/Kconfig @@ -110,6 +110,7 @@ config MAINBOARD_PART_NUMBER default "Blipper" if BOARD_GOOGLE_BLIPPER default "Cret" if BOARD_GOOGLE_CRET default "Pirika" if BOARD_GOOGLE_PIRIKA + default "Haboki" if BOARD_GOOGLE_HABOKI config MAX_CPUS int @@ -146,6 +147,7 @@ config VARIANT_DIR default "blipper" if BOARD_GOOGLE_BLIPPER default "cret" if BOARD_GOOGLE_CRET default "pirika" if BOARD_GOOGLE_PIRIKA + default "haboki" if BOARD_GOOGLE_HABOKI endif #BOARD_GOOGLE_BASEBOARD_DEDEDE diff --git a/src/mainboard/google/dedede/Kconfig.name b/src/mainboard/google/dedede/Kconfig.name index e0ead8ca71..3f2c5224c7 100644 --- a/src/mainboard/google/dedede/Kconfig.name +++ b/src/mainboard/google/dedede/Kconfig.name @@ -34,6 +34,15 @@ config BOARD_GOOGLE_DRAWCIA_LEGACY select DRIVERS_INTEL_MIPI_CAMERA select SOC_INTEL_COMMON_BLOCK_IPU +config BOARD_GOOGLE_HABOKI + bool "-> HABOKI" + select BOARD_GOOGLE_BASEBOARD_DEDEDE_TPM2 + select BASEBOARD_DEDEDE_LAPTOP + select DRIVERS_GENERIC_MAX98357A + select GEO_SAR_ENABLE if CHROMEOS_WIFI_SAR + select DRIVERS_INTEL_MIPI_CAMERA + select SOC_INTEL_COMMON_BLOCK_IPU + config BOARD_GOOGLE_MADOO bool "-> Madoo" select BOARD_GOOGLE_BASEBOARD_DEDEDE_CR50 diff --git a/src/mainboard/google/dedede/variants/haboki/Makefile.inc b/src/mainboard/google/dedede/variants/haboki/Makefile.inc new file mode 100644 index 0000000000..04eb9a4877 --- /dev/null +++ b/src/mainboard/google/dedede/variants/haboki/Makefile.inc @@ -0,0 +1,4 @@ +## SPDX-License-Identifier: GPL-2.0-or-later + +ramstage-y += gpio.c +ramstage-$(CONFIG_FW_CONFIG) += variant.c diff --git a/src/mainboard/google/dedede/variants/haboki/gpio.c b/src/mainboard/google/dedede/variants/haboki/gpio.c new file mode 100644 index 0000000000..03b9a45d7e --- /dev/null +++ b/src/mainboard/google/dedede/variants/haboki/gpio.c @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <boardid.h> +#include <fw_config.h> +#include <ec/google/chromeec/ec.h> + +/* Pad configuration in ramstage*/ +static const struct pad_config gpio_table[] = { + /* C12 : AP_PEN_DET_ODL has an external pull-up and hence no pad termination.*/ + PAD_CFG_GPI_GPIO_DRIVER(GPP_C12, NONE, DEEP), +}; + +const struct pad_config *variant_override_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(gpio_table); + return gpio_table; +} diff --git a/src/mainboard/google/dedede/variants/haboki/include/variant/ec.h b/src/mainboard/google/dedede/variants/haboki/include/variant/ec.h new file mode 100644 index 0000000000..27c930d4f2 --- /dev/null +++ b/src/mainboard/google/dedede/variants/haboki/include/variant/ec.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#ifndef MAINBOARD_EC_H +#define MAINBOARD_EC_H + +#include <baseboard/ec.h> + +/* Enable Keyboard Backlight in ACPI */ +#define EC_ENABLE_KEYBOARD_BACKLIGHT + +#endif diff --git a/src/mainboard/google/dedede/variants/haboki/include/variant/gpio.h b/src/mainboard/google/dedede/variants/haboki/include/variant/gpio.h new file mode 100644 index 0000000000..9078664608 --- /dev/null +++ b/src/mainboard/google/dedede/variants/haboki/include/variant/gpio.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#ifndef MAINBOARD_GPIO_H +#define MAINBOARD_GPIO_H + +#include <baseboard/gpio.h> + +#endif /* MAINBOARD_GPIO_H */ diff --git a/src/mainboard/google/dedede/variants/haboki/memory/Makefile.inc b/src/mainboard/google/dedede/variants/haboki/memory/Makefile.inc new file mode 100644 index 0000000000..f6282bf04c --- /dev/null +++ b/src/mainboard/google/dedede/variants/haboki/memory/Makefile.inc @@ -0,0 +1,5 @@ +## SPDX-License-Identifier: GPL-2.0-or-later +## This is an auto-generated file. Do not edit!! + +SPD_SOURCES = +SPD_SOURCES += lp4x-spd-1.hex # ID = 0(0b0000) Parts = MT53E512M32D2NP-046 WT:E, H9HCNNNBKMMLXR-NEE, K4U6E3S4AA-MGCR diff --git a/src/mainboard/google/dedede/variants/haboki/memory/dram_id.generated.txt b/src/mainboard/google/dedede/variants/haboki/memory/dram_id.generated.txt new file mode 100644 index 0000000000..856d016914 --- /dev/null +++ b/src/mainboard/google/dedede/variants/haboki/memory/dram_id.generated.txt @@ -0,0 +1,4 @@ +DRAM Part Name ID to assign +MT53E512M32D2NP-046 WT:E 0 (0000) +H9HCNNNBKMMLXR-NEE 0 (0000) +K4U6E3S4AA-MGCR 0 (0000) diff --git a/src/mainboard/google/dedede/variants/haboki/memory/mem_list_variant.txt b/src/mainboard/google/dedede/variants/haboki/memory/mem_list_variant.txt new file mode 100644 index 0000000000..26c06b6f40 --- /dev/null +++ b/src/mainboard/google/dedede/variants/haboki/memory/mem_list_variant.txt @@ -0,0 +1,3 @@ +MT53E512M32D2NP-046 WT:E +H9HCNNNBKMMLXR-NEE +K4U6E3S4AA-MGCR diff --git a/src/mainboard/google/dedede/variants/haboki/overridetree.cb b/src/mainboard/google/dedede/variants/haboki/overridetree.cb new file mode 100644 index 0000000000..aebfdcd29c --- /dev/null +++ b/src/mainboard/google/dedede/variants/haboki/overridetree.cb @@ -0,0 +1,307 @@ +chip soc/intel/jasperlake + + # USB Port Configuration + register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # Camera + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| GSPI0 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #| I2C0 | Trackpad | + #| I2C1 | Digitizer | + #| I2C2 | Touchscreen | + #| I2C3 | Camera | + #| I2C4 | Audio | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .gspi[0] = { + .speed_mhz = 1, + .early_init = 1, + }, + .i2c[0] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[1] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[4] = { + .speed = I2C_SPEED_FAST, + }, + }" + + register "power_limits_config" = "{ + .tdp_pl1_override = 6, + .tdp_pl2_override = 20, + }" + + register "tcc_offset" = "20" # TCC of 85C + + # Enable Acoustic noise mitigation and set slew rate to 1/4 + # Rest of the parameters are 0 by default. + register "AcousticNoiseMitigation" = "1" + register "SlowSlewRate" = "SlewRateFastBy4" + register "FastPkgCRampDisable" = "1" + + device domain 0 on + device pci 05.0 on # IPU - MIPI Camera + chip drivers/intel/mipi_camera + register "acpi_uid" = "0x50000" + register "acpi_name" = ""IPU0"" + register "device_type" = "INTEL_ACPI_CAMERA_CIO2" + + register "cio2_num_ports" = "2" + register "cio2_lanes_used" = "{1,4}" + register "cio2_lane_endpoint[1]" = ""^I2C3.CAM1"" + register "cio2_prt[0]" = "0" + register "cio2_prt[1]" = "2" + device generic 0 on end + end + end + + device pci 04.0 on + chip drivers/intel/dptf + # Default DPTF Policy for all drawcia boards if not overridden + register "options.tsr[0].desc" = ""Memory"" + register "options.tsr[1].desc" = ""Ambient"" + register "options.tsr[2].desc" = ""Charger"" + register "options.tsr[3].desc" = ""5V regulator"" + + ## Passive Policy + register "policies.passive" = "{ + [0] = DPTF_PASSIVE(CPU, CPU, 80, 1000), + [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 70, 4000), + [2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 51, 1000), + [3] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_2, 75, 5000), + [4] = DPTF_PASSIVE(CPU, TEMP_SENSOR_3, 60, 1000) + }" + + ## Critical Policy + register "policies.critical" = "{ + [0] = DPTF_CRITICAL(CPU, 119, SHUTDOWN), + [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 115, SHUTDOWN), + [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 115, SHUTDOWN), + [3] = DPTF_CRITICAL(TEMP_SENSOR_2, 115, SHUTDOWN), + [4] = DPTF_CRITICAL(TEMP_SENSOR_3, 115, SHUTDOWN) + }" + + register "controls.power_limits" = "{ + .pl1 = { + .min_power = 3800, + .max_power = 5800, + .time_window_min = 1 * MSECS_PER_SEC, + .time_window_max = 1 * MSECS_PER_SEC, + .granularity = 200, + }, + .pl2 = { + .min_power = 20000, + .max_power = 20000, + .time_window_min = 1 * MSECS_PER_SEC, + .time_window_max = 1 * MSECS_PER_SEC, + .granularity = 1000, + } + }" + + ## Charger Performance Control (Control, mA) + register "controls.charger_perf" = "{ + [0] = { 255, 3000 }, + [1] = { 24, 1500 }, + [2] = { 16, 1000 }, + [3] = { 8, 500 } + }" + + device generic 0 on end + end + end # SA Thermal device + device pci 14.0 on + chip drivers/usb/acpi + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""Camera"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 2.5 on end + end + end + end + end # USB xHCI + device pci 15.0 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_B3_IRQ)" + register "wake" = "GPE0_DW0_03" + register "probed" = "1" + device i2c 15 on end + end + end #I2C 0 + device pci 15.2 on + chip drivers/generic/gpio_keys + register "name" = ""PENH"" + register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_C12)" + register "key.wakeup_route" = "WAKEUP_ROUTE_GPIO_IRQ" + register "key.wakeup_event_action" = "EV_ACT_DEASSERTED" + register "key.dev_name" = ""EJCT"" + register "key.linux_code" = "SW_PEN_INSERTED" + register "key.linux_input_type" = "EV_SW" + register "key.label" = ""pen_eject"" + device generic 0 on end + end + chip drivers/i2c/generic + register "hid" = ""ELAN0001"" + register "desc" = ""ELAN Touchscreen"" + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)" + register "probed" = "1" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D5)" + register "reset_delay_ms" = "20" + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" + register "enable_delay_ms" = "1" + register "has_power_resource" = "1" + device i2c 10 on end + end + chip drivers/i2c/hid + register "generic.hid" = ""GTCH7503"" + register "generic.desc" = ""G2TOUCH Touchscreen"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)" + register "generic.probed" = "1" + register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D5)" + register "generic.reset_delay_ms" = "50" + register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" + register "generic.enable_delay_ms" = "1" + register "generic.has_power_resource" = "1" + register "generic.disable_gpio_export_in_crs" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 40 on end + end + chip drivers/i2c/hid + register "generic.hid" = ""GDIX0000"" + register "generic.desc" = ""Goodix Touchscreen"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)" + register "generic.probed" = "1" + register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D5)" + register "generic.reset_delay_ms" = "120" + register "generic.reset_off_delay_ms" = "2" + register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" + register "generic.enable_delay_ms" = "12" + register "generic.has_power_resource" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 0x5d on end + end + chip drivers/i2c/hid + register "generic.hid" = ""ELAN2513"" + register "generic.desc" = ""ELAN Touchscreen"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)" + register "generic.probed" = "1" + register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D5)" + register "generic.reset_delay_ms" = "20" + register "generic.reset_off_delay_ms" = "2" + register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)" + register "generic.enable_delay_ms" = "10" + register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A11)" + register "generic.stop_delay_ms" = "130" + register "generic.has_power_resource" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 15 on end + end + end # I2C 2 + device pci 15.3 on + chip drivers/intel/mipi_camera + register "acpi_hid" = ""OVTI8856"" + register "acpi_uid" = "0" + register "acpi_name" = ""CAM1"" + register "chip_name" = ""Ov 8856 Camera"" + register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" + + register "ssdb.lanes_used" = "4" + register "ssdb.link_used" = "1" + register "ssdb.vcm_type" = "0x0C" + register "vcm_name" = ""VCM0"" + register "num_freq_entries" = "2" + register "link_freq[0]" = "360000000" + register "link_freq[1]" = "180000000" + register "remote_name" = ""IPU0"" + + register "has_power_resource" = "1" + #Controls + register "clk_panel.clks[0].clknum" = "1" #IMGCLKOUT_1 + register "clk_panel.clks[0].freq" = "1" #19.2 Mhz + + register "gpio_panel.gpio[0].gpio_num" = "GPP_D13" #power_enable_2p8 + register "gpio_panel.gpio[1].gpio_num" = "GPP_D14" #power_enable_1p2 + register "gpio_panel.gpio[2].gpio_num" = "GPP_D12" #reset + + #_ON + register "on_seq.ops_cnt" = "5" + register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" + register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" + register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" + register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)" + register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)" + + #_OFF + register "off_seq.ops_cnt" = "4" + register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" + register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)" + register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" + register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + + device i2c 36 on end + end + chip drivers/intel/mipi_camera + register "acpi_hid" = "ACPI_DT_NAMESPACE_HID" + register "acpi_uid" = "3" + register "acpi_name" = ""VCM0"" + register "chip_name" = ""DW AF DAC"" + register "device_type" = "INTEL_ACPI_CAMERA_VCM" + + register "pr0" = ""\\_SB.PCI0.I2C3.CAM1.PRIC"" + register "vcm_compat" = ""dongwoon,dw9714"" + + device i2c 0C on end + end + chip drivers/intel/mipi_camera + register "acpi_uid" = "1" + register "acpi_name" = ""NVM0"" + register "chip_name" = ""GT24C08"" + register "device_type" = "INTEL_ACPI_CAMERA_NVM" + + register "nvm_size" = "0x0400" + register "nvm_pagesize" = "1" + register "nvm_readonly" = "1" + register "nvm_width" = "0x08" + register "nvm_compat" = ""atmel,24c08"" + + device i2c 50 on end + end + end # I2C 3 + device pci 19.0 on + chip drivers/i2c/generic + register "hid" = ""10EC5682"" + register "name" = ""RT58"" + register "desc" = ""Headset Codec"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)" + # Set the jd_src to RT5668_JD1 for jack detection + register "property_count" = "1" + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on end + end + end #I2C 4 + device pci 1f.3 on + chip drivers/generic/max98357a + register "hid" = ""MX98360A"" + register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D17)" + device generic 0 on end + end + end # Intel HDA + end +end diff --git a/src/mainboard/google/dedede/variants/haboki/variant.c b/src/mainboard/google/dedede/variants/haboki/variant.c new file mode 100644 index 0000000000..8f321837f6 --- /dev/null +++ b/src/mainboard/google/dedede/variants/haboki/variant.c @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <drivers/intel/gma/opregion.h> +#include <fw_config.h> +#include <sar.h> + +const char *get_wifi_sar_cbfs_filename(void) +{ + if (fw_config_probe(FW_CONFIG(TABLETMODE, TABLETMODE_ENABLED))) + return "wifi_sar-habokay.hex"; + + return WIFI_SAR_CBFS_DEFAULT_FILENAME; +} |