diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/cpu/intel/car/p4-netburst/cache_as_ram.S | 48 |
1 files changed, 37 insertions, 11 deletions
diff --git a/src/cpu/intel/car/p4-netburst/cache_as_ram.S b/src/cpu/intel/car/p4-netburst/cache_as_ram.S index 8587ea522f..bdce514cd5 100644 --- a/src/cpu/intel/car/p4-netburst/cache_as_ram.S +++ b/src/cpu/intel/car/p4-netburst/cache_as_ram.S @@ -297,21 +297,32 @@ no_msr_11e: post_code(0x2c) + /* Cache the whole rom to fetch microcode updates */ + movl $MTRR_PHYS_BASE(1), %ecx + xorl %edx, %edx + movl $CACHE_ROM_BASE | MTRR_TYPE_WRPROT, %eax + wrmsr + + movl $MTRR_PHYS_MASK(1), %ecx + rdmsr + movl $(~(CACHE_ROM_SIZE - 1) | MTRR_PHYS_MASK_VALID), %eax + wrmsr + /* Enable cache (CR0.CD = 0, CR0.NW = 0). */ movl %cr0, %eax andl $(~(CR0_CacheDisable | CR0_NoWriteThrough)), %eax invd movl %eax, %cr0 - /* Clear the cache memory region. This will also fill up the cache. */ - cld - xorl %eax, %eax - movl $CACHE_AS_RAM_BASE, %edi - movl $(CACHE_AS_RAM_SIZE >> 2), %ecx - rep stosl - +#if IS_ENABLED(CONFIG_MICROCODE_UPDATE_PRE_RAM) + update_microcode: + /* put the return address in %esp */ + movl $end_microcode_update, %esp + jmp update_bsp_microcode + end_microcode_update: +#endif post_code(0x2d) - /* Enable Cache-as-RAM mode by disabling cache. */ + /* Disable caching to change MTRR's. */ movl %cr0, %eax orl $CR0_CacheDisable, %eax movl %eax, %cr0 @@ -326,8 +337,16 @@ no_msr_11e: movl $1, %eax cpuid cmp $0xf, %ah - je skip_cache_rom + jne cache_rom +disable_cache_rom: + movl $MTRR_PHYS_MASK(1), %ecx + rdmsr + andl $(~MTRR_PHYS_MASK_VALID), %eax + wrmsr + jmp fill_cache + +cache_rom: /* Enable cache for our code in Flash because we do XIP here */ movl $MTRR_PHYS_BASE(1), %ecx xorl %edx, %edx @@ -345,14 +364,21 @@ no_msr_11e: movl $(~(CONFIG_XIP_ROM_SIZE - 1) | MTRR_PHYS_MASK_VALID), %eax wrmsr -skip_cache_rom: - +fill_cache: post_code(0x2e) /* Enable cache. */ movl %cr0, %eax andl $(~(CR0_CacheDisable | CR0_NoWriteThrough)), %eax + invd movl %eax, %cr0 + /* Clear the cache memory region. This will also fill up the cache. */ + cld + xorl %eax, %eax + movl $CACHE_AS_RAM_BASE, %edi + movl $(CACHE_AS_RAM_SIZE >> 2), %ecx + rep stosl + /* Setup the stack. */ mov $_car_stack_end, %esp |