diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/devices/oprom/x86.c | 87 | ||||
| -rw-r--r-- | src/devices/oprom/x86_asm.S | 222 | ||||
| -rw-r--r-- | src/northbridge/via/cx700/cx700_vga.c | 14 | ||||
| -rw-r--r-- | src/northbridge/via/cx700/northbridge.h | 4 | ||||
| -rw-r--r-- | src/northbridge/via/vt8623/northbridge.h | 4 | ||||
| -rw-r--r-- | src/northbridge/via/vt8623/vga.c | 18 | ||||
| -rw-r--r-- | src/northbridge/via/vx800/northbridge.h | 3 | ||||
| -rw-r--r-- | src/northbridge/via/vx800/vga.c | 16 |
8 files changed, 203 insertions, 165 deletions
diff --git a/src/devices/oprom/x86.c b/src/devices/oprom/x86.c index 4d9604a581..42267faa5f 100644 --- a/src/devices/oprom/x86.c +++ b/src/devices/oprom/x86.c @@ -34,12 +34,45 @@ struct realmode_idt { void x86_exception(struct eregs *info); +/* From x86_asm.S */ extern unsigned char __idt_handler, __idt_handler_size; extern unsigned char __realmode_code, __realmode_code_size; -extern unsigned char __run_optionrom, __run_interrupt; +extern unsigned char __realmode_call, __realmode_interrupt; -void (*run_optionrom)(u32 devfn) __attribute__((regparm(0))) = (void *)&__run_optionrom; -void (*vga_enable_console)(void) __attribute__((regparm(0))) = (void *)&__run_interrupt; +void (*realmode_call)(u32 addr, u32 eax, u32 ebx, u32 ecx, u32 edx, + u32 esi, u32 edi) __attribute__((regparm(0))) = (void *)&__realmode_call; + +void (*realmode_interrupt)(u32 intno, u32 eax, u32 ebx, u32 ecx, u32 edx, + u32 esi, u32 edi) __attribute__((regparm(0))) = (void *)&__realmode_interrupt; + +#define FAKE_MEMORY_SIZE (1024*1024) // only 1MB +#define INITIAL_EBDA_SEGMENT 0xF600 +#define INITIAL_EBDA_SIZE 0x400 + +static void setup_bda(void) +{ + /* clear BIOS DATA AREA */ + memset((void *)0x400, 0, 0x200); + + write16(0x413, FAKE_MEMORY_SIZE / 1024); + write16(0x40e, INITIAL_EBDA_SEGMENT); + + /* Set up EBDA */ + memset((void *)(INITIAL_EBDA_SEGMENT << 4), 0, INITIAL_EBDA_SIZE); + write16((INITIAL_EBDA_SEGMENT << 4) + 0x0, INITIAL_EBDA_SIZE / 1024); +} + +static void setup_rombios(void) +{ + const char date[] = "06/11/99"; + memcpy((void *)0xffff5, &date, 8); + + const char ident[] = "PCI_ISA"; + memcpy((void *)0xfffd9, &ident, 7); + + /* system model: IBM-AT */ + write8(0xffffe, 0xfc); +} int (*intXX_handler[256])(struct eregs *regs) = { NULL }; @@ -47,7 +80,12 @@ static int intXX_exception_handler(struct eregs *regs) { printk(BIOS_INFO, "Oops, exception %d while executing option rom\n", regs->vector); +#if 0 + // Odd: The i945GM VGA oprom chokes on a pushl %eax and will + // die with an exception #6 if we run the coreboot exception + // handler. Just continue, as it executes fine. x86_exception(regs); // Call coreboot exception handler +#endif return 0; // Never returns? } @@ -138,20 +176,38 @@ static void setup_realmode_idt(void) /* int42 is the relocated int10 */ write_idt_stub((void *)0xff065, 0x42); - - /* VIA's VBIOS calls f000:f859 instead of int15 */ + /* BIOS Int 11 Handler F000:F84D */ + write_idt_stub((void *)0xff84d, 0x11); + /* BIOS Int 12 Handler F000:F841 */ + write_idt_stub((void *)0xff841, 0x12); + /* BIOS Int 13 Handler F000:EC59 */ + write_idt_stub((void *)0xfec59, 0x13); + /* BIOS Int 14 Handler F000:E739 */ + write_idt_stub((void *)0xfe739, 0x14); + /* BIOS Int 15 Handler F000:F859 */ write_idt_stub((void *)0xff859, 0x15); + /* BIOS Int 16 Handler F000:E82E */ + write_idt_stub((void *)0xfe82e, 0x16); + /* BIOS Int 17 Handler F000:EFD2 */ + write_idt_stub((void *)0xfefd2, 0x17); + /* ROM BIOS Int 1A Handler F000:FE6E */ + write_idt_stub((void *)0xffe6e, 0x1a); } void run_bios(struct device *dev, unsigned long addr) { - /* clear vga bios data area */ - memset((void *)0x400, 0, 0x200); + u32 num_dev = (dev->bus->secondary << 8) | dev->path.pci.devfn; + + /* Set up BIOS Data Area */ + setup_bda(); + + /* Set up some legacy information in the F segment */ + setup_rombios(); /* Set up C interrupt handlers */ setup_interrupt_handlers(); - /* Setting up realmode IDT */ + /* Set up real-mode IDT */ setup_realmode_idt(); memcpy(REALMODE_BASE, &__realmode_code, (size_t)&__realmode_code_size); @@ -159,7 +215,9 @@ void run_bios(struct device *dev, unsigned long addr) (u32)&__realmode_code_size); printk(BIOS_DEBUG, "Calling Option ROM...\n"); - run_optionrom((dev->bus->secondary << 8) | dev->path.pci.devfn); + /* TODO ES:DI Pointer to System BIOS PnP Installation Check Structure */ + /* Option ROM entry point is at OPROM start + 3 */ + realmode_call(addr + 0x0003, num_dev, 0xffff, 0x0000, 0xffff, 0x0, 0x0); printk(BIOS_DEBUG, "... Option ROM returned.\n"); } @@ -168,9 +226,6 @@ void run_bios(struct device *dev, unsigned long addr) #include <cpu/amd/vr.h> #include <cbfs.h> -extern unsigned char __run_vsa; -void (*run_vsa)(u32 smm, u32 sysmem) __attribute__((regparm(0))) = (void *)&__run_vsa; - #define VSA2_BUFFER 0x60000 #define VSA2_ENTRY_POINT 0x60020 @@ -198,9 +253,6 @@ void do_vsmbios(void) { printk(BIOS_DEBUG, "Preparing for VSA...\n"); - /* clear bios data area */ - memset((void *)0x400, 0, 0x200); - /* Set up C interrupt handlers */ setup_interrupt_handlers(); @@ -229,8 +281,11 @@ void do_vsmbios(void) } printk(BIOS_DEBUG, "Calling VSA module...\n"); + /* ECX gets SMM, EDX gets SYSMEM */ - run_vsa(MSR_GLIU0_SMM, MSR_GLIU0_SYSMEM); + realmode_call(VSA2_ENTRY_POINT, 0x0, 0x0, MSR_GLIU0_SMM, + MSR_GLIU0_SYSMEM, 0x0, 0x0); + printk(BIOS_DEBUG, "... VSA module returned.\n"); /* Restart timer 1 */ diff --git a/src/devices/oprom/x86_asm.S b/src/devices/oprom/x86_asm.S index 469c42f90b..ee7c5faaab 100644 --- a/src/devices/oprom/x86_asm.S +++ b/src/devices/oprom/x86_asm.S @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2009 coresystems GmbH + * Copyright (C) 2009-2010 coresystems GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -57,21 +57,49 @@ __realmode_idt = RELOCATED(.) __stack = RELOCATED(.) .long 0 +/* Register store for realmode_call and realmode_interrupt */ +__registers = RELOCATED(.) + .long 0 /* 0x00 - EAX */ + .long 0 /* 0x04 - EBX */ + .long 0 /* 0x08 - ECX */ + .long 0 /* 0x0c - EDX */ + .long 0 /* 0x10 - EDI */ + .long 0 /* 0x14 - ESI */ + .code32 - .globl __run_optionrom -__run_optionrom = RELOCATED(.) + .globl __realmode_call +__realmode_call = RELOCATED(.) /* save all registers to the stack */ pushal /* Move the protected mode stack to a safe place */ - mov %esp, __stack - - /* Get devfn into %ecx */ + movl %esp, __stack movl %esp, %ebp + /* This function is called with regparm=0 and we have - * to skip the 32 byte from pushal: + * to skip the 32 byte from pushal. Hence start at 36. */ - movl 36(%ebp), %ecx + + /* entry point */ + movl 36(%ebp), %eax + movw %ax, __lcall_instr + 1 + andl $0xffff0000, %eax + shrl $4, %eax + movw %ax, __lcall_instr + 3 + + /* initial register values */ + movl 40(%ebp), %eax + movl %eax, __registers + 0x00 /* eax */ + movl 44(%ebp), %eax + movl %eax, __registers + 0x04 /* ebx */ + movl 48(%ebp), %eax + movl %eax, __registers + 0x08 /* ecx */ + movl 52(%ebp), %eax + movl %eax, __registers + 0x0c /* edx */ + movl 56(%ebp), %eax + movl %eax, __registers + 0x10 /* esi */ + movl 60(%ebp), %eax + movl %eax, __registers + 0x14 /* esi */ /* Activate the right segment descriptor real mode. */ ljmp $0x28, $RELOCATED(1f) @@ -120,11 +148,18 @@ __run_optionrom = RELOCATED(.) mov $0x40, %ax mov %ax, %ds + /* initialize registers for option rom lcall */ + movl __registers + 0, %eax + movl __registers + 4, %ebx + movl __registers + 8, %ecx + movl __registers + 12, %edx + movl __registers + 16, %esi + movl __registers + 20, %edi + /* ************************************ */ - mov %cx, %ax // restore ax - // TODO this will not work for non-VGA option ROMs - /* run VGA BIOS at 0xc000:0003 */ - lcall $0xc000, $0x0003 +__lcall_instr = RELOCATED(.) + .byte 0x9a + .word 0x0000, 0x0000 /* ************************************ */ /* If we got here, just about done. @@ -151,126 +186,47 @@ __run_optionrom = RELOCATED(.) lidt idtarg /* and exit */ - mov __stack, %esp + movl __stack, %esp popal - ret -#if defined(CONFIG_GEODE_VSA) && CONFIG_GEODE_VSA -#define VSA2_ENTRY_POINT 0x60020 + // TODO return AX from OPROM call + ret - .globl __run_vsa -__run_vsa = RELOCATED(.) + .globl __realmode_interrupt +__realmode_interrupt = RELOCATED(.) /* save all registers to the stack */ pushal - - /* Move the protected mode stack to a safe place */ - mov %esp, __stack - + /* save the stack */ + movl %esp, __stack movl %esp, %ebp - /* This function is called with regparm=0 and we have - * to skip the 32 byte from pushal: - */ - movl 36(%ebp), %ecx - movl 40(%ebp), %edx - - /* Activate the right segment descriptor real mode. */ - ljmp $0x28, $RELOCATED(1f) -1: -.code16 - /* 16 bit code from here on... */ - - /* Load the segment registers w/ properly configured - * segment descriptors. They will retain these - * configurations (limits, writability, etc.) once - * protected mode is turned off. - */ - mov $0x30, %ax - mov %ax, %ds - mov %ax, %es - mov %ax, %fs - mov %ax, %gs - mov %ax, %ss - - /* Turn off protection */ - movl %cr0, %eax - andl $~PE, %eax - movl %eax, %cr0 - - /* Now really going into real mode */ - ljmp $0, $RELOCATED(1f) -1: - /* Setup a stack: Put the stack at the end of page zero. - * That way we can easily share it between real and - * protected, since the 16 bit ESP at segment 0 will - * work for any case. */ - mov $0x0, %ax - mov %ax, %ss - movl $0x1000, %eax - movl %eax, %esp - /* Load our 16 bit idt */ - xor %ax, %ax - mov %ax, %ds - lidt __realmode_idt - - /* Set all segments to 0x0000, ds to 0x0040 */ - mov %ax, %es - mov %ax, %fs - mov %ax, %gs - mov $0x40, %ax - mov %ax, %ds - mov %cx, %ax // restore ax - - /* ************************************ */ - lcall $((VSA2_ENTRY_POINT & 0xffff0000) >> 4), $(VSA2_ENTRY_POINT & 0xffff) - /* ************************************ */ - - /* If we got here, just about done. - * Need to get back to protected mode + /* This function is called with regparm=0 and we have + * to skip the 32 byte from pushal. Hence start at 36. */ - movl %cr0, %eax - orl $PE, %eax - movl %eax, %cr0 - - /* Now that we are in protected mode - * jump to a 32 bit code segment. - */ - data32 ljmp $0x10, $RELOCATED(1f) -1: - .code32 - movw $0x18, %ax - mov %ax, %ds - mov %ax, %es - mov %ax, %fs - mov %ax, %gs - mov %ax, %ss - - /* restore proper idt */ - lidt idtarg - - /* and exit */ - mov __stack, %esp - popal - ret -#endif - - .globl __run_interrupt -__run_interrupt = RELOCATED(.) - - pushal - /* save the stack */ - mov %esp, __stack + /* prepare interrupt calling code */ + movl 36(%ebp), %eax + movb %al, __intXX_instr + 1 /* intno */ + + /* initial register values */ + movl 40(%ebp), %eax + movl %eax, __registers + 0x00 /* eax */ + movl 44(%ebp), %eax + movl %eax, __registers + 0x04 /* ebx */ + movl 48(%ebp), %eax + movl %eax, __registers + 0x08 /* ecx */ + movl 52(%ebp), %eax + movl %eax, __registers + 0x0c /* edx */ + movl 56(%ebp), %eax + movl %eax, __registers + 0x10 /* esi */ + movl 60(%ebp), %eax + movl %eax, __registers + 0x14 /* esi */ /* This configures CS properly for real mode. */ ljmp $0x28, $RELOCATED(1f) 1: .code16 /* 16 bit code from here on... */ - // DEBUG - movb $0xec, %al - outb %al, $0x80 - /* Load the segment registers w/ properly configured segment * descriptors. They will retain these configurations (limits, * writability, etc.) once protected mode is turned off. @@ -291,9 +247,9 @@ __run_interrupt = RELOCATED(.) data32 ljmp $0, $RELOCATED(1f) 1: - /* put the stack at the end of page zero. - * that way we can easily share it between real and protected, - * since the 16-bit ESP at segment 0 will work for any case. + /* put the stack at the end of page zero. That way we can easily + * share it between real mode and protected mode, because %esp and + * %ss:%sp point to the same memory. */ /* setup a stack */ mov $0x0, %ax @@ -312,18 +268,16 @@ __run_interrupt = RELOCATED(.) mov %ax, %fs mov %ax, %gs - /* Call VGA BIOS int10 function 0x4f14 to enable main console - * Epia-M does not always autosence the main console so forcing - * it on is good. - */ + /* initialize registers for intXX call */ + movl __registers + 0, %eax + movl __registers + 4, %ebx + movl __registers + 8, %ecx + movl __registers + 12, %edx + movl __registers + 16, %esi + movl __registers + 20, %edi - /* Ask VGA option rom to enable main console */ - movw $0x4f14,%ax - movw $0x8003,%bx - movw $1, %cx - movw $0, %dx - movw $0, %di - int $0x10 +__intXX_instr = RELOCATED(.) + .byte 0xcd, 0x00 /* This becomes intXX */ /* Ok, the job is done, now go back to protected mode coreboot */ movl %cr0, %eax @@ -345,13 +299,15 @@ __run_interrupt = RELOCATED(.) lidt idtarg /* Exit */ - mov __stack, %esp + movl __stack, %esp popal ret /* This is the 16-bit interrupt entry point called by the IDT stub code. + * * Before this code code is called, %eax is pushed to the stack, and the - * interrupt number is loaded into %al + * interrupt number is loaded into %al. On return this function cleans up + * for its caller. */ .code16 __interrupt_handler_16bit = RELOCATED(.) diff --git a/src/northbridge/via/cx700/cx700_vga.c b/src/northbridge/via/cx700/cx700_vga.c index 2999907616..2da428c32f 100644 --- a/src/northbridge/via/cx700/cx700_vga.c +++ b/src/northbridge/via/cx700/cx700_vga.c @@ -144,6 +144,17 @@ static void write_protect_vgabios(void) } #endif +static void vga_enable_console(void) +{ + /* Call VGA BIOS int10 function 0x4f14 to enable main console + * Epia-M does not always autosense the main console so forcing + * it on is good. + */ + + /* int#, EAX, EBX, ECX, EDX, ESI, EDI */ + realmode_interrupt(0x10, 0x4f1f, 0x8003, 0x0001, 0x0000, 0x0000, 0x0000); +} + static void vga_init(device_t dev) { u8 reg8; @@ -166,9 +177,6 @@ static void vga_init(device_t dev) if (pci_read_config32(dev, PCI_ROM_ADDRESS) != 0xc0000) return; printk(BIOS_DEBUG, "Enable VGA console\n"); - // this is how it should look: - // call_bios_interrupt(0x10,0x4f1f,0x8003,1,0); - // this is how it looks: vga_enable_console(); /* It's not clear if these need to be programmed before or after diff --git a/src/northbridge/via/cx700/northbridge.h b/src/northbridge/via/cx700/northbridge.h index 193ba1fa48..4ae9ce5937 100644 --- a/src/northbridge/via/cx700/northbridge.h +++ b/src/northbridge/via/cx700/northbridge.h @@ -21,6 +21,6 @@ #define NORTHBRIDGE_VIA_CX700_H extern unsigned int cx700_scan_root_bus(device_t root, unsigned int max); -extern void (*vga_enable_console)(void) __attribute__((regparm(0))); - +extern void (*realmode_interrupt)(u32 intno, u32 eax, u32 ebx, u32 ecx, u32 edx, + u32 esi, u32 edi) __attribute__((regparm(0))); #endif /* NORTHBRIDGE_VIA_CX700_H */ diff --git a/src/northbridge/via/vt8623/northbridge.h b/src/northbridge/via/vt8623/northbridge.h index b3a2e75f15..9c0828741c 100644 --- a/src/northbridge/via/vt8623/northbridge.h +++ b/src/northbridge/via/vt8623/northbridge.h @@ -2,7 +2,7 @@ #define NORTHBRIDGE_VIA_VT8623_H unsigned int vt8623_scan_root_bus(device_t root, unsigned int max); -extern void (*vga_enable_console)(void) __attribute__((regparm(0))); -void write_protect_vgabios(void); +extern void (*realmode_interrupt)(u32 intno, u32 eax, u32 ebx, u32 ecx, u32 edx, + u32 esi, u32 edi) __attribute__((regparm(0))); #endif /* NORTHBRIDGE_VIA_VT8623_H */ diff --git a/src/northbridge/via/vt8623/vga.c b/src/northbridge/via/vt8623/vga.c index 78ffe0aa94..eb780cafe7 100644 --- a/src/northbridge/via/vt8623/vga.c +++ b/src/northbridge/via/vt8623/vga.c @@ -72,7 +72,8 @@ static int via_vt8623_int15_handler(struct eregs *regs) return res; } -void write_protect_vgabios(void) +#ifdef UNUSED_CODE +static void write_protect_vgabios(void) { device_t dev; @@ -86,6 +87,7 @@ void write_protect_vgabios(void) if (dev) pci_write_config8(dev, 0x61, 0xaa); } +#endif static void vga_random_fixup(device_t dev) { @@ -96,6 +98,17 @@ static void vga_random_fixup(device_t dev) pci_write_config32(dev,0x14,0xdc000000); } +static void vga_enable_console(void) +{ + /* Call VGA BIOS int10 function 0x4f14 to enable main console + * Epia-M does not always autosense the main console so forcing + * it on is good. + */ + + /* int#, EAX, EBX, ECX, EDX, ESI, EDI */ + realmode_interrupt(0x10, 0x4f1f, 0x8003, 0x0001, 0x0000, 0x0000, 0x0000); +} + static void vga_init(device_t dev) { vga_random_fixup(dev); @@ -118,9 +131,6 @@ static void vga_init(device_t dev) pci_dev_init(dev); printk(BIOS_DEBUG, "Enable VGA console\n"); - // this is how it should look: - // call_bios_interrupt(0x10,0x4f1f,0x8003,1,0); - // this is how it looks: vga_enable_console(); #ifdef MEASURE_VGA_INIT_TIME diff --git a/src/northbridge/via/vx800/northbridge.h b/src/northbridge/via/vx800/northbridge.h index ed6bd13e2c..05f75d2649 100644 --- a/src/northbridge/via/vx800/northbridge.h +++ b/src/northbridge/via/vx800/northbridge.h @@ -21,6 +21,7 @@ #define NORTHBRIDGE_VIA_VX800_H extern unsigned int vx800_scan_root_bus(device_t root, unsigned int max); -extern void (*vga_enable_console)(void) __attribute__((regparm(0))); +extern void (*realmode_interrupt)(u32 intno, u32 eax, u32 ebx, u32 ecx, u32 edx, + u32 esi, u32 edi) __attribute__((regparm(0))); #endif /* NORTHBRIDGE_VIA_VX800_H */ diff --git a/src/northbridge/via/vx800/vga.c b/src/northbridge/via/vx800/vga.c index cd33770823..b57ba50e84 100644 --- a/src/northbridge/via/vx800/vga.c +++ b/src/northbridge/via/vx800/vga.c @@ -127,7 +127,7 @@ static int via_vx800_int15_handler(struct eregs *regs) } #ifdef UNUSED_CODE -void write_protect_vgabios(void) +static void write_protect_vgabios(void) { device_t dev; @@ -144,6 +144,17 @@ void write_protect_vgabios(void) } #endif +static void vga_enable_console(void) +{ + /* Call VGA BIOS int10 function 0x4f14 to enable main console + * Epia-M does not always autosense the main console so forcing + * it on is good. + */ + + /* int#, EAX, EBX, ECX, EDX, ESI, EDI */ + realmode_interrupt(0x10, 0x4f1f, 0x8003, 0x0001, 0x0000, 0x0000, 0x0000); +} + extern u8 acpi_sleep_type; static void vga_init(device_t dev) { @@ -170,9 +181,6 @@ static void vga_init(device_t dev) pci_dev_init(dev); printk(BIOS_DEBUG, "Enable VGA console\n"); - // this is how it should look: - // call_bios_interrupt(0x10,0x4f1f,0x8003,1,0); - // this is how it looks: vga_enable_console(); if ((acpi_sleep_type == 3)/* || (PAYLOAD_IS_SEABIOS == 0)*/) { |