diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/soc/intel/common/block/include/intelblocks/gpio_defs.h | 241 |
1 files changed, 125 insertions, 116 deletions
diff --git a/src/soc/intel/common/block/include/intelblocks/gpio_defs.h b/src/soc/intel/common/block/include/intelblocks/gpio_defs.h index 1ff0b2c29d..e9abd0018c 100644 --- a/src/soc/intel/common/block/include/intelblocks/gpio_defs.h +++ b/src/soc/intel/common/block/include/intelblocks/gpio_defs.h @@ -133,7 +133,7 @@ #define PAD_CFG0_BUF_NO_DISABLE (0) #define PAD_CFG0_BUF_TX_DISABLE PAD_CFG0_TX_DISABLE #define PAD_CFG0_BUF_RX_DISABLE PAD_CFG0_RX_DISABLE -#define PAD_CFG0_BUF_TX_RX_DISABLE \ +#define PAD_CFG0_BUF_TX_RX_DISABLE \ (PAD_CFG0_TX_DISABLE | PAD_CFG0_RX_DISABLE) #define PAD_BUF(value) PAD_CFG0_BUF_##value @@ -146,17 +146,17 @@ #define PAD_IOSTERM(value) 0 #endif -#define PAD_IRQ_CFG(route, trig, inv) \ - (PAD_IRQ_ROUTE(route) | \ - PAD_TRIG(trig) | \ - PAD_RX_POL(inv)) +#define PAD_IRQ_CFG(route, trig, inv) \ + (PAD_IRQ_ROUTE(route) | \ + PAD_TRIG(trig) | \ + PAD_RX_POL(inv)) #if CONFIG(SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT) -#define PAD_IRQ_CFG_DUAL_ROUTE(route1, route2, trig, inv) \ - (PAD_IRQ_ROUTE(route1) | \ - PAD_IRQ_ROUTE(route2) | \ - PAD_TRIG(trig) | \ - PAD_RX_POL(inv)) +#define PAD_IRQ_CFG_DUAL_ROUTE(route1, route2, trig, inv) \ + (PAD_IRQ_ROUTE(route1) | \ + PAD_IRQ_ROUTE(route2) | \ + PAD_TRIG(trig) | \ + PAD_RX_POL(inv)) #endif /* CONFIG_SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT */ #define _PAD_CFG_STRUCT(__pad, __config0, __config1) \ @@ -180,121 +180,130 @@ #endif /* Native function configuration */ -#define PAD_CFG_NF(pad, pull, rst, func) \ - _PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \ - PAD_IOSSTATE(TxLASTRxE)) +#define PAD_CFG_NF(pad, pull, rst, func) \ + _PAD_CFG_STRUCT(pad, \ + PAD_RESET(rst) | PAD_FUNC(func), \ + PAD_PULL(pull) | PAD_IOSSTATE(TxLASTRxE)) /* * Set native function with RX Level/Edge configuration and disable * input/output buffer if necessary */ -#define PAD_CFG_NF_BUF_TRIG(pad, pull, rst, func, bufdis, trig) \ - _PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_TRIG(trig) | \ - PAD_BUF(bufdis) | PAD_FUNC(func), \ +#define PAD_CFG_NF_BUF_TRIG(pad, pull, rst, func, bufdis, trig) \ + _PAD_CFG_STRUCT(pad, \ + PAD_RESET(rst) | PAD_TRIG(trig) | \ + PAD_BUF(bufdis) | PAD_FUNC(func), \ PAD_PULL(pull) | PAD_IOSSTATE(TxLASTRxE)) #if CONFIG(SOC_INTEL_COMMON_BLOCK_GPIO_PADCFG_PADTOL) /* Native 1.8V tolerant pad, only applies to some pads like I2C/I2S Not applicable to all SOCs. Refer EDS */ -#define PAD_CFG_NF_1V8(pad, pull, rst, func) \ - _PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) |\ - PAD_IOSSTATE(TxLASTRxE) | PAD_CFG1_TOL_1V8) +#define PAD_CFG_NF_1V8(pad, pull, rst, func) \ + _PAD_CFG_STRUCT(pad, \ + PAD_RESET(rst) | PAD_FUNC(func), \ + PAD_PULL(pull) | PAD_IOSSTATE(TxLASTRxE) | PAD_CFG1_TOL_1V8) #endif /* Native function configuration for standby state */ -#define PAD_CFG_NF_IOSSTATE(pad, pull, rst, func, iosstate) \ - _PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \ - PAD_IOSSTATE(iosstate)) +#define PAD_CFG_NF_IOSSTATE(pad, pull, rst, func, iosstate) \ + _PAD_CFG_STRUCT(pad, \ + PAD_RESET(rst) | PAD_FUNC(func), \ + PAD_PULL(pull) | PAD_IOSSTATE(iosstate)) /* Native function configuration for standby state, also configuring iostandby as masked */ -#define PAD_CFG_NF_IOSTANDBY_IGNORE(pad, pull, rst, func) \ - _PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \ - PAD_IOSSTATE(IGNORE)) +#define PAD_CFG_NF_IOSTANDBY_IGNORE(pad, pull, rst, func) \ + _PAD_CFG_STRUCT(pad, \ + PAD_RESET(rst) | PAD_FUNC(func), \ + PAD_PULL(pull) | PAD_IOSSTATE(IGNORE)) /* Native function configuration for standby state, also configuring iosstate and iosterm */ -#define PAD_CFG_NF_IOSSTATE_IOSTERM(pad, pull, rst, func, iosstate, iosterm) \ - _PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \ +#define PAD_CFG_NF_IOSSTATE_IOSTERM(pad, pull, rst, func, iosstate, iosterm) \ + _PAD_CFG_STRUCT(pad, \ + PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \ PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm)) /* Configure native function, iosstate, iosterm and disable input/output buffer */ #define PAD_CFG_NF_BUF_IOSSTATE_IOSTERM(pad, pull, rst, func, bufdis, iosstate, iosterm) \ - _PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_BUF(bufdis) | PAD_FUNC(func), \ + _PAD_CFG_STRUCT(pad, \ + PAD_RESET(rst) | PAD_BUF(bufdis) | PAD_FUNC(func), \ PAD_PULL(pull) | PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm)) /* General purpose output, no pullup/down. */ -#define PAD_CFG_GPO(pad, val, rst) \ - _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | \ - PAD_TRIG(OFF) | PAD_BUF(RX_DISABLE) | !!val, \ +#define PAD_CFG_GPO(pad, val, rst) \ + _PAD_CFG_STRUCT(pad, \ + PAD_FUNC(GPIO) | PAD_RESET(rst) | \ + PAD_TRIG(OFF) | PAD_BUF(RX_DISABLE) | !!val, \ PAD_PULL(NONE) | PAD_IOSSTATE(TxLASTRxE)) /* General purpose output, with termination specified */ -#define PAD_CFG_TERM_GPO(pad, val, pull, rst) \ - _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | \ - PAD_TRIG(OFF) | PAD_BUF(RX_DISABLE) | !!val, \ +#define PAD_CFG_TERM_GPO(pad, val, pull, rst) \ + _PAD_CFG_STRUCT(pad, \ + PAD_FUNC(GPIO) | PAD_RESET(rst) | \ + PAD_TRIG(OFF) | PAD_BUF(RX_DISABLE) | !!val, \ PAD_PULL(pull) | PAD_IOSSTATE(TxLASTRxE)) /* General purpose output, no pullup/down. */ -#define PAD_CFG_GPO_GPIO_DRIVER(pad, val, rst, pull) \ - _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | \ - PAD_TRIG(OFF) | PAD_BUF(RX_DISABLE) | !!val, \ - PAD_PULL(pull) | PAD_IOSSTATE(TxLASTRxE) | PAD_CFG_OWN_GPIO(DRIVER)) +#define PAD_CFG_GPO_GPIO_DRIVER(pad, val, rst, pull) \ + _PAD_CFG_STRUCT(pad, \ + PAD_FUNC(GPIO) | PAD_RESET(rst) | \ + PAD_TRIG(OFF) | PAD_BUF(RX_DISABLE) | !!val, \ + PAD_PULL(pull) | PAD_IOSSTATE(TxLASTRxE) | \ + PAD_CFG_OWN_GPIO(DRIVER)) /* General purpose output. */ #define PAD_CFG_GPO_IOSSTATE_IOSTERM(pad, val, rst, pull, iosstate, ioterm) \ - _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | \ - PAD_TRIG(OFF) | PAD_BUF(RX_DISABLE) | !!val, \ + _PAD_CFG_STRUCT(pad, \ + PAD_FUNC(GPIO) | PAD_RESET(rst) | \ + PAD_TRIG(OFF) | PAD_BUF(RX_DISABLE) | !!val, \ PAD_PULL(pull) | PAD_IOSSTATE(iosstate) | PAD_IOSTERM(ioterm)) /* General purpose input */ -#define PAD_CFG_GPI(pad, pull, rst) \ - _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE), \ +#define PAD_CFG_GPI(pad, pull, rst) \ + _PAD_CFG_STRUCT(pad, \ + PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE), \ PAD_PULL(pull) | PAD_IOSSTATE(TxDRxE)) -#define PAD_CFG_GPI_IOSSTATE(pad, pull, rst, iosstate) \ - _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE, \ +#define PAD_CFG_GPI_IOSSTATE(pad, pull, rst, iosstate) \ + _PAD_CFG_STRUCT(pad, \ + PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE, \ PAD_PULL(pull) | PAD_IOSSTATE(iosstate)) -#define PAD_CFG_GPI_IOSSTATE_IOSTERM(pad, pull, rst, iosstate, iosterm) \ - _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE, \ +#define PAD_CFG_GPI_IOSSTATE_IOSTERM(pad, pull, rst, iosstate, iosterm) \ + _PAD_CFG_STRUCT(pad, \ + PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE, \ PAD_PULL(pull) | PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm)) /* * General purpose input. The following macro sets the * Host Software Pad Ownership to GPIO Driver mode. */ -#define PAD_CFG_GPI_TRIG_OWN(pad, pull, rst, trig, own) \ - _PAD_CFG_STRUCT(pad, PAD_FUNC(GPIO) | PAD_RESET(rst) | \ - PAD_TRIG(trig) | PAD_RX_POL(NONE) | PAD_BUF(TX_DISABLE), \ +#define PAD_CFG_GPI_TRIG_OWN(pad, pull, rst, trig, own) \ + _PAD_CFG_STRUCT(pad, \ + PAD_FUNC(GPIO) | PAD_RESET(rst) | \ + PAD_TRIG(trig) | PAD_RX_POL(NONE) | PAD_BUF(TX_DISABLE), \ PAD_PULL(pull) | PAD_IOSSTATE(TxDRxE) | PAD_CFG_OWN_GPIO(own)) -#define PAD_CFG_GPI_GPIO_DRIVER(pad, pull, rst) \ - _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE), \ +#define PAD_CFG_GPI_GPIO_DRIVER(pad, pull, rst) \ + _PAD_CFG_STRUCT(pad, \ + PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE), \ PAD_PULL(pull) | PAD_CFG_OWN_GPIO(DRIVER) | PAD_IOSSTATE(TxDRxE)) -#define PAD_CFG_GPIO_DRIVER_HI_Z(pad, pull, rst, iosstate, iosterm) \ - _PAD_CFG_STRUCT(pad, \ +#define PAD_CFG_GPIO_DRIVER_HI_Z(pad, pull, rst, iosstate, iosterm) \ + _PAD_CFG_STRUCT(pad, \ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_RX_DISABLE), \ PAD_PULL(pull) | PAD_CFG_OWN_GPIO(DRIVER) | \ PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm)) -#define PAD_CFG_GPIO_HI_Z(pad, pull, rst, iosstate, iosterm) \ - _PAD_CFG_STRUCT(pad, \ +#define PAD_CFG_GPIO_HI_Z(pad, pull, rst, iosstate, iosterm) \ + _PAD_CFG_STRUCT(pad, \ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_RX_DISABLE), \ PAD_PULL(pull) | PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm)) /* GPIO Interrupt */ -#define PAD_CFG_GPI_INT(pad, pull, rst, trig) \ +#define PAD_CFG_GPI_INT(pad, pull, rst, trig) \ PAD_CFG_GPI_TRIG_OWN(pad, pull, rst, trig, DRIVER) /* @@ -302,22 +311,22 @@ * Both TX and RX are disabled. RX disabling is done to avoid unnecessary * setting of GPI_STS. RX Level/Edge Trig Configuration set to disable */ -#define PAD_NC(pad, pull) \ +#define PAD_NC(pad, pull) \ _PAD_CFG_STRUCT(pad, \ PAD_FUNC(GPIO) | PAD_RESET(DEEP) | \ - PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), \ + PAD_TRIG(OFF) | PAD_BUF(TX_RX_DISABLE), \ PAD_PULL(pull) | PAD_IOSSTATE(TxDRxE)) #if CONFIG(SOC_INTEL_COMMON_BLOCK_GPIO_LEGACY_MACROS) -#define PAD_CFG_GPI_APIC(pad, pull, rst) \ - _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \ +#define PAD_CFG_GPI_APIC(pad, pull, rst) \ + _PAD_CFG_STRUCT(pad, \ + PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \ PAD_IRQ_CFG(IOAPIC, LEVEL, NONE), PAD_PULL(pull)) -#define PAD_CFG_GPI_APIC_INVERT(pad, pull, rst) \ - _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \ +#define PAD_CFG_GPI_APIC_INVERT(pad, pull, rst) \ + _PAD_CFG_STRUCT(pad, \ + PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \ PAD_IRQ_CFG(IOAPIC, LEVEL, INVERT), PAD_PULL(pull)) #define PAD_CFG_GPI_ACPI_SCI(pad, pull, rst, inv) \ @@ -336,18 +345,18 @@ #else /* General purpose input, routed to APIC */ -#define PAD_CFG_GPI_APIC(pad, pull, rst, trig, inv) \ - _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \ - PAD_IRQ_CFG(IOAPIC, trig, inv), PAD_PULL(pull) | \ +#define PAD_CFG_GPI_APIC(pad, pull, rst, trig, inv) \ + _PAD_CFG_STRUCT(pad, \ + PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \ + PAD_IRQ_CFG(IOAPIC, trig, inv), PAD_PULL(pull) | \ PAD_IOSSTATE(TxDRxE)) #endif /* General purpose input, routed to APIC - with IOStandby Config*/ -#define PAD_CFG_GPI_APIC_IOS(pad, pull, rst, trig, inv, iosstate, iosterm) \ - _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \ - PAD_IRQ_CFG(IOAPIC, trig, inv), PAD_PULL(pull) | \ +#define PAD_CFG_GPI_APIC_IOS(pad, pull, rst, trig, inv, iosstate, iosterm) \ + _PAD_CFG_STRUCT(pad, \ + PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \ + PAD_IRQ_CFG(IOAPIC, trig, inv), PAD_PULL(pull) | \ PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm)) /* @@ -355,47 +364,47 @@ * on its own end. One just needs to pass an active high message into the * ITSS. */ -#define PAD_CFG_GPI_APIC_LOW(pad, pull, rst) \ +#define PAD_CFG_GPI_APIC_LOW(pad, pull, rst) \ PAD_CFG_GPI_APIC(pad, pull, rst, LEVEL, INVERT) -#define PAD_CFG_GPI_APIC_HIGH(pad, pull, rst) \ +#define PAD_CFG_GPI_APIC_HIGH(pad, pull, rst) \ PAD_CFG_GPI_APIC(pad, pull, rst, LEVEL, NONE) -#define PAD_CFG_GPI_APIC_EDGE_LOW(pad, pull, rst) \ +#define PAD_CFG_GPI_APIC_EDGE_LOW(pad, pull, rst) \ PAD_CFG_GPI_APIC(pad, pull, rst, EDGE_SINGLE, INVERT) /* General purpose input, routed to SMI */ -#define PAD_CFG_GPI_SMI(pad, pull, rst, trig, inv) \ - _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \ - PAD_IRQ_CFG(SMI, trig, inv), PAD_PULL(pull) | \ +#define PAD_CFG_GPI_SMI(pad, pull, rst, trig, inv) \ + _PAD_CFG_STRUCT(pad, \ + PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \ + PAD_IRQ_CFG(SMI, trig, inv), PAD_PULL(pull) | \ PAD_IOSSTATE(TxDRxE)) /* General purpose input, routed to SMI */ -#define PAD_CFG_GPI_SMI_IOS(pad, pull, rst, trig, inv, iosstate, iosterm) \ - _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \ - PAD_IRQ_CFG(SMI, trig, inv), PAD_PULL(pull) | \ +#define PAD_CFG_GPI_SMI_IOS(pad, pull, rst, trig, inv, iosstate, iosterm) \ + _PAD_CFG_STRUCT(pad, \ + PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \ + PAD_IRQ_CFG(SMI, trig, inv), PAD_PULL(pull) | \ PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm)) -#define PAD_CFG_GPI_SMI_LOW(pad, pull, rst, trig) \ +#define PAD_CFG_GPI_SMI_LOW(pad, pull, rst, trig) \ PAD_CFG_GPI_SMI(pad, pull, rst, trig, INVERT) -#define PAD_CFG_GPI_SMI_HIGH(pad, pull, rst, trig) \ +#define PAD_CFG_GPI_SMI_HIGH(pad, pull, rst, trig) \ PAD_CFG_GPI_SMI(pad, pull, rst, trig, NONE) /* General purpose input, routed to SCI */ -#define PAD_CFG_GPI_SCI(pad, pull, rst, trig, inv) \ - _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \ - PAD_IRQ_CFG(SCI, trig, inv), PAD_PULL(pull) | \ +#define PAD_CFG_GPI_SCI(pad, pull, rst, trig, inv) \ + _PAD_CFG_STRUCT(pad, \ + PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \ + PAD_IRQ_CFG(SCI, trig, inv), PAD_PULL(pull) | \ PAD_IOSSTATE(TxDRxE)) /* General purpose input, routed to SCI */ -#define PAD_CFG_GPI_SCI_IOS(pad, pull, rst, trig, inv, iosstate, iosterm) \ - _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \ - PAD_IRQ_CFG(SCI, trig, inv), PAD_PULL(pull) | \ +#define PAD_CFG_GPI_SCI_IOS(pad, pull, rst, trig, inv, iosstate, iosterm) \ + _PAD_CFG_STRUCT(pad, \ + PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \ + PAD_IRQ_CFG(SCI, trig, inv), PAD_PULL(pull) | \ PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm)) #define PAD_CFG_GPI_SCI_LOW(pad, pull, rst, trig) \ @@ -404,33 +413,33 @@ #define PAD_CFG_GPI_SCI_HIGH(pad, pull, rst, trig) \ PAD_CFG_GPI_SCI(pad, pull, rst, trig, NONE) -#define PAD_CFG_GPI_SCI_DEBEN(pad, pull, rst, trig, inv, dur) \ - _PAD_CFG_STRUCT_3(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \ - PAD_IRQ_CFG(SCI, trig, inv), PAD_PULL(pull) | \ +#define PAD_CFG_GPI_SCI_DEBEN(pad, pull, rst, trig, inv, dur) \ + _PAD_CFG_STRUCT_3(pad, \ + PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \ + PAD_IRQ_CFG(SCI, trig, inv), PAD_PULL(pull) | \ PAD_IOSSTATE(TxDRxE), PAD_CFG2_DEBEN | PAD_CFG2_##dur) -#define PAD_CFG_GPI_SCI_LOW_DEBEN(pad, pull, rst, trig, dur) \ +#define PAD_CFG_GPI_SCI_LOW_DEBEN(pad, pull, rst, trig, dur) \ PAD_CFG_GPI_SCI_DEBEN(pad, pull, rst, trig, INVERT, dur) -#define PAD_CFG_GPI_SCI_HIGH_DEBEN(pad, pull, rst, trig, dur) \ +#define PAD_CFG_GPI_SCI_HIGH_DEBEN(pad, pull, rst, trig, dur) \ PAD_CFG_GPI_SCI_DEBEN(pad, pull, rst, trig, NONE, dur) /* General purpose input, routed to NMI */ -#define PAD_CFG_GPI_NMI(pad, pull, rst, trig, inv) \ - _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \ - PAD_IRQ_CFG(NMI, trig, inv), PAD_PULL(pull) | \ +#define PAD_CFG_GPI_NMI(pad, pull, rst, trig, inv) \ + _PAD_CFG_STRUCT(pad, \ + PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \ + PAD_IRQ_CFG(NMI, trig, inv), PAD_PULL(pull) | \ PAD_IOSSTATE(TxDRxE)) #if CONFIG(SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT) -#define PAD_CFG_GPI_DUAL_ROUTE(pad, pull, rst, trig, inv, route1, route2) \ - _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \ - PAD_IRQ_CFG_DUAL_ROUTE(route1, route2, trig, inv), \ +#define PAD_CFG_GPI_DUAL_ROUTE(pad, pull, rst, trig, inv, route1, route2) \ + _PAD_CFG_STRUCT(pad, \ + PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_BUF(TX_DISABLE) | \ + PAD_IRQ_CFG_DUAL_ROUTE(route1, route2, trig, inv), \ PAD_PULL(pull) | PAD_IOSSTATE(TxDRxE)) -#define PAD_CFG_GPI_IRQ_WAKE(pad, pull, rst, trig, inv) \ +#define PAD_CFG_GPI_IRQ_WAKE(pad, pull, rst, trig, inv) \ PAD_CFG_GPI_DUAL_ROUTE(pad, pull, rst, trig, inv, IOAPIC, SCI) #endif /* CONFIG_SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT */ |