diff options
Diffstat (limited to 'src')
13 files changed, 177 insertions, 293 deletions
diff --git a/src/drivers/i2c/sx9310/chip.h b/src/drivers/i2c/sx9310/chip.h index 96690e32b4..3dcbcc4c15 100644 --- a/src/drivers/i2c/sx9310/chip.h +++ b/src/drivers/i2c/sx9310/chip.h @@ -6,7 +6,18 @@ #include <acpi/acpi_device.h> #include <device/i2c_simple.h> -#define REGISTER(NAME) uint8_t NAME +#define MAX_COMBINED_SENSORS_ENTRIES 4 + +enum sx9310_resolution { + SX9310_COARSEST = 1, + SX9310_VERY_COARSE, + SX9310_COARSE, + SX9310_MEDIUM_COARSE, + SX9310_MEDIUM, + SX9310_FINE, + SX9310_VERY_FINE, + SX9310_FINEST, +}; struct drivers_i2c_sx9310_config { /* Device Description */ @@ -23,9 +34,34 @@ struct drivers_i2c_sx9310_config { /* IO-APIC interrupt */ struct acpi_irq irq; -#include "registers.h" -}; -#undef REGISTER + /* + * Registers definition in the kernel source tree at: + * Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml + */ + + /* When true, cs0 is the ground. 0 [default] is false. */ + uint32_t cs0_ground; + + /* Sensor used for start-up proximity detection: Default 0. */ + uint32_t startup_sensor; + + /* Raw Proximity filter strength: When not set, disabled. */ + uint32_t proxraw_strength; + + /* Average Proximity filter strength: When not set, disabled. */ + uint32_t avg_pos_strength; + + /* + * List of which sensors are combined and represented by CS3. + * Could be standalone (3) or combination of 0, 1, 2, 3. + * Driver default: CS0 + CS1. + */ + uint32_t combined_sensors_count; + uint32_t combined_sensors[MAX_COMBINED_SENSORS_ENTRIES]; + + /* Capacitance measure resolution. Driver default: "finest". */ + enum sx9310_resolution resolution; +}; #endif /* __DRIVERS_I2C_SX9310_CHIP_H__ */ diff --git a/src/drivers/i2c/sx9310/registers.h b/src/drivers/i2c/sx9310/registers.h deleted file mode 100644 index 4744ae4c67..0000000000 --- a/src/drivers/i2c/sx9310/registers.h +++ /dev/null @@ -1,29 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#ifndef REGISTER -#error "define REGISTER(NAME) before including this file" -#endif - -REGISTER(reg_prox_ctrl0); -REGISTER(reg_prox_ctrl1); -REGISTER(reg_prox_ctrl2); -REGISTER(reg_prox_ctrl3); -REGISTER(reg_prox_ctrl4); -REGISTER(reg_prox_ctrl5); -REGISTER(reg_prox_ctrl6); -REGISTER(reg_prox_ctrl7); -REGISTER(reg_prox_ctrl8); -REGISTER(reg_prox_ctrl9); -REGISTER(reg_prox_ctrl10); -REGISTER(reg_prox_ctrl11); -REGISTER(reg_prox_ctrl12); -REGISTER(reg_prox_ctrl13); -REGISTER(reg_prox_ctrl14); -REGISTER(reg_prox_ctrl15); -REGISTER(reg_prox_ctrl16); -REGISTER(reg_prox_ctrl17); -REGISTER(reg_prox_ctrl18); -REGISTER(reg_prox_ctrl19); -REGISTER(reg_sar_ctrl0); -REGISTER(reg_sar_ctrl1); -REGISTER(reg_sar_ctrl2); diff --git a/src/drivers/i2c/sx9310/sx9310.c b/src/drivers/i2c/sx9310/sx9310.c index 8dc57a2d98..d9e5a14c5b 100644 --- a/src/drivers/i2c/sx9310/sx9310.c +++ b/src/drivers/i2c/sx9310/sx9310.c @@ -12,9 +12,16 @@ #define I2C_SX9310_ACPI_ID "STH9310" #define I2C_SX9310_ACPI_NAME "Semtech SX9310" -#define REGISTER(NAME) acpi_dp_add_integer(dsd, \ - I2C_SX9310_ACPI_ID "," #NAME, \ - config->NAME) +static const char * const i2c_sx9310_resolution[] = { + [SX9310_COARSEST] = "coarsest", + [SX9310_VERY_COARSE] = "very-coarse", + [SX9310_COARSE] = "coarse", + [SX9310_MEDIUM_COARSE] = "medium-coarse", + [SX9310_MEDIUM] = "medium", + [SX9310_FINE] = "fine", + [SX9310_VERY_FINE] = "very-fine", + [SX9310_FINEST] = "finest", +}; static void i2c_sx9310_fill_ssdt(const struct device *dev) { @@ -27,6 +34,7 @@ static void i2c_sx9310_fill_ssdt(const struct device *dev) .resource = scope, }; struct acpi_dp *dsd; + struct acpi_dp *combined_sensors; if (!scope || !config) return; @@ -56,9 +64,35 @@ static void i2c_sx9310_fill_ssdt(const struct device *dev) /* DSD */ dsd = acpi_dp_new_table("_DSD"); -#include "registers.h" - acpi_dp_write(dsd); + /* + * Format describe in linux kernel documentation. See + * https://www.kernel.org/doc/Documentation/devicetree/bindings/iio/proximity/semtech%2Csx9310.yaml + */ + acpi_dp_add_integer(dsd, "semtech,cs0-ground", config->cs0_ground); + acpi_dp_add_integer(dsd, "semtech,startup-sensor", + config->startup_sensor); + acpi_dp_add_integer(dsd, "semtech,proxraw-strength", + config->proxraw_strength); + acpi_dp_add_integer(dsd, "semtech,avg-pos-strength", + config->avg_pos_strength); + + /* Add combined_sensors package */ + if (config->combined_sensors_count > 0) { + combined_sensors = acpi_dp_new_table("semtech,combined-sensors"); + for (int i = 0; + i < config->combined_sensors_count && + i < MAX_COMBINED_SENSORS_ENTRIES; ++i) { + acpi_dp_add_integer(combined_sensors, NULL, + config->combined_sensors[i]); + } + acpi_dp_add_array(dsd, combined_sensors); + } + if (config->resolution && config->resolution < ARRAY_SIZE(i2c_sx9310_resolution)) + acpi_dp_add_string(dsd, "semtech,resolution", + i2c_sx9310_resolution[config->resolution]); + + acpi_dp_write(dsd); acpigen_pop_len(); /* Device */ acpigen_pop_len(); /* Scope */ @@ -66,8 +100,6 @@ static void i2c_sx9310_fill_ssdt(const struct device *dev) config->desc ? : dev->chip_ops->name, dev_path(dev)); } -#undef REGISTER - static const char *i2c_sx9310_acpi_name(const struct device *dev) { static char name[5]; diff --git a/src/mainboard/google/hatch/variants/hatch/overridetree.cb b/src/mainboard/google/hatch/variants/hatch/overridetree.cb index 01afa16000..ca2eb04570 100644 --- a/src/mainboard/google/hatch/variants/hatch/overridetree.cb +++ b/src/mainboard/google/hatch/variants/hatch/overridetree.cb @@ -129,29 +129,15 @@ chip soc/intel/cannonlake register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_A0)" register "speed" = "I2C_SPEED_FAST" register "uid" = "1" - register "reg_prox_ctrl0" = "0x10" - register "reg_prox_ctrl1" = "0x00" - register "reg_prox_ctrl2" = "0x84" - register "reg_prox_ctrl3" = "0x0e" - register "reg_prox_ctrl4" = "0x07" - register "reg_prox_ctrl5" = "0xc6" - register "reg_prox_ctrl6" = "0x20" - register "reg_prox_ctrl7" = "0x0d" - register "reg_prox_ctrl8" = "0x8d" - register "reg_prox_ctrl9" = "0x43" - register "reg_prox_ctrl10" = "0x1f" - register "reg_prox_ctrl11" = "0x00" - register "reg_prox_ctrl12" = "0x00" - register "reg_prox_ctrl13" = "0x00" - register "reg_prox_ctrl14" = "0x00" - register "reg_prox_ctrl15" = "0x00" - register "reg_prox_ctrl16" = "0x00" - register "reg_prox_ctrl17" = "0x00" - register "reg_prox_ctrl18" = "0x00" - register "reg_prox_ctrl19" = "0x00" - register "reg_sar_ctrl0" = "0x50" - register "reg_sar_ctrl1" = "0x8a" - register "reg_sar_ctrl2" = "0x3c" + register "cs0_ground" = "0x0" + register "combined_sensors_count" = "3" + register "combined_sensors[0]" = "0" + register "combined_sensors[1]" = "1" + register "combined_sensors[2]" = "2" + register "resolution" = "SX9310_FINEST" + register "avg_pos_strength" = "512" + register "startup_sensor" = "0" + register "proxraw_strength" = "0" device i2c 28 on end end end # I2C #3 diff --git a/src/mainboard/google/hatch/variants/mushu/overridetree.cb b/src/mainboard/google/hatch/variants/mushu/overridetree.cb index 74b3e1f4e8..71d339a99b 100644 --- a/src/mainboard/google/hatch/variants/mushu/overridetree.cb +++ b/src/mainboard/google/hatch/variants/mushu/overridetree.cb @@ -149,29 +149,15 @@ chip soc/intel/cannonlake register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_A0)" register "speed" = "I2C_SPEED_FAST" register "uid" = "1" - register "reg_prox_ctrl0" = "0x10" - register "reg_prox_ctrl1" = "0x00" - register "reg_prox_ctrl2" = "0x84" - register "reg_prox_ctrl3" = "0x0e" - register "reg_prox_ctrl4" = "0x07" - register "reg_prox_ctrl5" = "0xc6" - register "reg_prox_ctrl6" = "0x20" - register "reg_prox_ctrl7" = "0x0d" - register "reg_prox_ctrl8" = "0x8d" - register "reg_prox_ctrl9" = "0x43" - register "reg_prox_ctrl10" = "0x1f" - register "reg_prox_ctrl11" = "0x00" - register "reg_prox_ctrl12" = "0x00" - register "reg_prox_ctrl13" = "0x00" - register "reg_prox_ctrl14" = "0x00" - register "reg_prox_ctrl15" = "0x00" - register "reg_prox_ctrl16" = "0x00" - register "reg_prox_ctrl17" = "0x00" - register "reg_prox_ctrl18" = "0x00" - register "reg_prox_ctrl19" = "0x00" - register "reg_sar_ctrl0" = "0x50" - register "reg_sar_ctrl1" = "0x8a" - register "reg_sar_ctrl2" = "0x3c" + register "cs0_ground" = "0x0" + register "combined_sensors_count" = "3" + register "combined_sensors[0]" = "0" + register "combined_sensors[1]" = "1" + register "combined_sensors[2]" = "2" + register "resolution" = "SX9310_FINEST" + register "avg_pos_strength" = "512" + register "startup_sensor" = "0" + register "proxraw_strength" = "0" device i2c 28 on end end end # I2C #3 diff --git a/src/mainboard/google/octopus/variants/bobba/overridetree.cb b/src/mainboard/google/octopus/variants/bobba/overridetree.cb index 73adfef9ab..0eff4353c9 100644 --- a/src/mainboard/google/octopus/variants/bobba/overridetree.cb +++ b/src/mainboard/google/octopus/variants/bobba/overridetree.cb @@ -121,29 +121,15 @@ chip soc/intel/apollolake register "desc" = ""SAR Proximity Sensor"" register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_214_IRQ)" register "uid" = "1" - register "reg_prox_ctrl0" = "0x10" - register "reg_prox_ctrl1" = "0x00" - register "reg_prox_ctrl2" = "0x84" - register "reg_prox_ctrl3" = "0x0e" - register "reg_prox_ctrl4" = "0x07" - register "reg_prox_ctrl5" = "0xc6" - register "reg_prox_ctrl6" = "0x20" - register "reg_prox_ctrl7" = "0x0d" - register "reg_prox_ctrl8" = "0x8d" - register "reg_prox_ctrl9" = "0x43" - register "reg_prox_ctrl10" = "0x11" - register "reg_prox_ctrl11" = "0x00" - register "reg_prox_ctrl12" = "0x00" - register "reg_prox_ctrl13" = "0x00" - register "reg_prox_ctrl14" = "0x00" - register "reg_prox_ctrl15" = "0x00" - register "reg_prox_ctrl16" = "0x00" - register "reg_prox_ctrl17" = "0x00" - register "reg_prox_ctrl18" = "0x00" - register "reg_prox_ctrl19" = "0x00" - register "reg_sar_ctrl0" = "0x50" - register "reg_sar_ctrl1" = "0x8a" - register "reg_sar_ctrl2" = "0x3c" + register "cs0_ground" = "0x0" + register "combined_sensors_count" = "3" + register "combined_sensors[0]" = "0" + register "combined_sensors[1]" = "1" + register "combined_sensors[2]" = "2" + register "resolution" = "SX9310_FINEST" + register "avg_pos_strength" = "512" + register "startup_sensor" = "0" + register "proxraw_strength" = "0" device i2c 28 on end end end # - I2C 1 diff --git a/src/mainboard/google/poppy/variants/nocturne/devicetree.cb b/src/mainboard/google/poppy/variants/nocturne/devicetree.cb index 899990de0b..39e241eba3 100644 --- a/src/mainboard/google/poppy/variants/nocturne/devicetree.cb +++ b/src/mainboard/google/poppy/variants/nocturne/devicetree.cb @@ -311,30 +311,16 @@ chip soc/intel/skylake register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D9_IRQ)" register "speed" = "I2C_SPEED_FAST" register "uid" = "0" - register "reg_prox_ctrl0" = "0x10" - register "reg_prox_ctrl1" = "0x00" - register "reg_prox_ctrl2" = "0x84" - register "reg_prox_ctrl3" = "0x0e" - register "reg_prox_ctrl4" = "0x07" - register "reg_prox_ctrl5" = "0xc6" - register "reg_prox_ctrl6" = "0x20" - register "reg_prox_ctrl7" = "0x0d" - register "reg_prox_ctrl8" = "0x8d" - register "reg_prox_ctrl9" = "0x43" - register "reg_prox_ctrl10" = "0x1f" - register "reg_prox_ctrl11" = "0x00" - register "reg_prox_ctrl12" = "0x00" - register "reg_prox_ctrl13" = "0x00" - register "reg_prox_ctrl14" = "0x00" - register "reg_prox_ctrl15" = "0x00" - register "reg_prox_ctrl16" = "0x00" - register "reg_prox_ctrl17" = "0x00" - register "reg_prox_ctrl18" = "0x00" - register "reg_prox_ctrl19" = "0x00" - register "reg_sar_ctrl0" = "0x50" - register "reg_sar_ctrl1" = "0x8a" - register "reg_sar_ctrl2" = "0x3c" device i2c 28 on end + register "cs0_ground" = "0x0" + register "combined_sensors_count" = "3" + register "combined_sensors[0]" = "0" + register "combined_sensors[1]" = "1" + register "combined_sensors[2]" = "2" + register "resolution" = "SX9310_FINEST" + register "avg_pos_strength" = "512" + register "startup_sensor" = "0" + register "proxraw_strength" = "0" end end # I2C #1 device pci 15.2 off end # I2C #2 @@ -352,30 +338,16 @@ chip soc/intel/skylake register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D10_IRQ)" register "speed" = "I2C_SPEED_FAST" register "uid" = "1" - register "reg_prox_ctrl0" = "0x10" - register "reg_prox_ctrl1" = "0x00" - register "reg_prox_ctrl2" = "0x84" - register "reg_prox_ctrl3" = "0x0e" - register "reg_prox_ctrl4" = "0x07" - register "reg_prox_ctrl5" = "0xc6" - register "reg_prox_ctrl6" = "0x20" - register "reg_prox_ctrl7" = "0x0d" - register "reg_prox_ctrl8" = "0x8d" - register "reg_prox_ctrl9" = "0x43" - register "reg_prox_ctrl10" = "0x1f" - register "reg_prox_ctrl11" = "0x00" - register "reg_prox_ctrl12" = "0x00" - register "reg_prox_ctrl13" = "0x00" - register "reg_prox_ctrl14" = "0x00" - register "reg_prox_ctrl15" = "0x00" - register "reg_prox_ctrl16" = "0x00" - register "reg_prox_ctrl17" = "0x00" - register "reg_prox_ctrl18" = "0x00" - register "reg_prox_ctrl19" = "0x00" - register "reg_sar_ctrl0" = "0x50" - register "reg_sar_ctrl1" = "0x8a" - register "reg_sar_ctrl2" = "0x3c" device i2c 28 on end + register "cs0_ground" = "0x0" + register "combined_sensors_count" = "3" + register "combined_sensors[0]" = "0" + register "combined_sensors[1]" = "1" + register "combined_sensors[2]" = "2" + register "resolution" = "SX9310_FINEST" + register "avg_pos_strength" = "512" + register "startup_sensor" = "0" + register "proxraw_strength" = "0" end end # I2C #5 device pci 19.2 on diff --git a/src/mainboard/google/volteer/variants/halvor/overridetree.cb b/src/mainboard/google/volteer/variants/halvor/overridetree.cb index 568ca73c3b..c875ee3866 100644 --- a/src/mainboard/google/volteer/variants/halvor/overridetree.cb +++ b/src/mainboard/google/volteer/variants/halvor/overridetree.cb @@ -82,29 +82,15 @@ chip soc/intel/tigerlake register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" register "speed" = "I2C_SPEED_FAST" register "uid" = "0" - register "reg_prox_ctrl0" = "0x10" - register "reg_prox_ctrl1" = "0x00" - register "reg_prox_ctrl2" = "0x84" - register "reg_prox_ctrl3" = "0x0e" - register "reg_prox_ctrl4" = "0x07" - register "reg_prox_ctrl5" = "0xc6" - register "reg_prox_ctrl6" = "0x20" - register "reg_prox_ctrl7" = "0x0d" - register "reg_prox_ctrl8" = "0x8d" - register "reg_prox_ctrl9" = "0x43" - register "reg_prox_ctrl10" = "0x1f" - register "reg_prox_ctrl11" = "0x00" - register "reg_prox_ctrl12" = "0x00" - register "reg_prox_ctrl13" = "0x00" - register "reg_prox_ctrl14" = "0x00" - register "reg_prox_ctrl15" = "0x00" - register "reg_prox_ctrl16" = "0x00" - register "reg_prox_ctrl17" = "0x00" - register "reg_prox_ctrl18" = "0x00" - register "reg_prox_ctrl19" = "0x00" - register "reg_sar_ctrl0" = "0x50" - register "reg_sar_ctrl1" = "0x8a" - register "reg_sar_ctrl2" = "0x3c" + register "cs0_ground" = "0x0" + register "combined_sensors_count" = "3" + register "combined_sensors[0]" = "0" + register "combined_sensors[1]" = "1" + register "combined_sensors[2]" = "2" + register "resolution" = "SX9310_FINEST" + register "avg_pos_strength" = "512" + register "startup_sensor" = "0" + register "proxraw_strength" = "0" device i2c 28 on end end end diff --git a/src/mainboard/google/volteer/variants/malefor/overridetree.cb b/src/mainboard/google/volteer/variants/malefor/overridetree.cb index 95dc3f7b45..00d609f702 100644 --- a/src/mainboard/google/volteer/variants/malefor/overridetree.cb +++ b/src/mainboard/google/volteer/variants/malefor/overridetree.cb @@ -69,29 +69,15 @@ chip soc/intel/tigerlake register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" register "speed" = "I2C_SPEED_FAST" register "uid" = "0" - register "reg_prox_ctrl0" = "0x10" - register "reg_prox_ctrl1" = "0x00" - register "reg_prox_ctrl2" = "0x84" - register "reg_prox_ctrl3" = "0x0e" - register "reg_prox_ctrl4" = "0x07" - register "reg_prox_ctrl5" = "0xc6" - register "reg_prox_ctrl6" = "0x20" - register "reg_prox_ctrl7" = "0x0d" - register "reg_prox_ctrl8" = "0x8d" - register "reg_prox_ctrl9" = "0x43" - register "reg_prox_ctrl10" = "0x1f" - register "reg_prox_ctrl11" = "0x00" - register "reg_prox_ctrl12" = "0x00" - register "reg_prox_ctrl13" = "0x00" - register "reg_prox_ctrl14" = "0x00" - register "reg_prox_ctrl15" = "0x00" - register "reg_prox_ctrl16" = "0x00" - register "reg_prox_ctrl17" = "0x00" - register "reg_prox_ctrl18" = "0x00" - register "reg_prox_ctrl19" = "0x00" - register "reg_sar_ctrl0" = "0x50" - register "reg_sar_ctrl1" = "0x8a" - register "reg_sar_ctrl2" = "0x3c" + register "cs0_ground" = "0x0" + register "combined_sensors_count" = "3" + register "combined_sensors[0]" = "0" + register "combined_sensors[1]" = "1" + register "combined_sensors[2]" = "2" + register "resolution" = "SX9310_FINEST" + register "avg_pos_strength" = "512" + register "startup_sensor" = "0" + register "proxraw_strength" = "0" device i2c 28 on end end end diff --git a/src/mainboard/google/volteer/variants/trondo/overridetree.cb b/src/mainboard/google/volteer/variants/trondo/overridetree.cb index 7169932ae4..a7de5ead31 100644 --- a/src/mainboard/google/volteer/variants/trondo/overridetree.cb +++ b/src/mainboard/google/volteer/variants/trondo/overridetree.cb @@ -39,29 +39,15 @@ chip soc/intel/tigerlake register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" register "speed" = "I2C_SPEED_FAST" register "uid" = "0" - register "reg_prox_ctrl0" = "0x10" - register "reg_prox_ctrl1" = "0x00" - register "reg_prox_ctrl2" = "0x84" - register "reg_prox_ctrl3" = "0x0e" - register "reg_prox_ctrl4" = "0x07" - register "reg_prox_ctrl5" = "0xc6" - register "reg_prox_ctrl6" = "0x20" - register "reg_prox_ctrl7" = "0x0d" - register "reg_prox_ctrl8" = "0x8d" - register "reg_prox_ctrl9" = "0x43" - register "reg_prox_ctrl10" = "0x1f" - register "reg_prox_ctrl11" = "0x00" - register "reg_prox_ctrl12" = "0x00" - register "reg_prox_ctrl13" = "0x00" - register "reg_prox_ctrl14" = "0x00" - register "reg_prox_ctrl15" = "0x00" - register "reg_prox_ctrl16" = "0x00" - register "reg_prox_ctrl17" = "0x00" - register "reg_prox_ctrl18" = "0x00" - register "reg_prox_ctrl19" = "0x00" - register "reg_sar_ctrl0" = "0x50" - register "reg_sar_ctrl1" = "0x8a" - register "reg_sar_ctrl2" = "0x3c" + register "cs0_ground" = "0x0" + register "combined_sensors_count" = "3" + register "combined_sensors[0]" = "0" + register "combined_sensors[1]" = "1" + register "combined_sensors[2]" = "2" + register "resolution" = "SX9310_FINEST" + register "avg_pos_strength" = "512" + register "startup_sensor" = "0" + register "proxraw_strength" = "0" device i2c 28 on end end end diff --git a/src/mainboard/google/volteer/variants/volteer/overridetree.cb b/src/mainboard/google/volteer/variants/volteer/overridetree.cb index f23ef76393..10e199ae4d 100644 --- a/src/mainboard/google/volteer/variants/volteer/overridetree.cb +++ b/src/mainboard/google/volteer/variants/volteer/overridetree.cb @@ -155,29 +155,15 @@ chip soc/intel/tigerlake register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" register "speed" = "I2C_SPEED_FAST" register "uid" = "0" - register "reg_prox_ctrl0" = "0x10" - register "reg_prox_ctrl1" = "0x00" - register "reg_prox_ctrl2" = "0x84" - register "reg_prox_ctrl3" = "0x0e" - register "reg_prox_ctrl4" = "0x07" - register "reg_prox_ctrl5" = "0xc6" - register "reg_prox_ctrl6" = "0x20" - register "reg_prox_ctrl7" = "0x0d" - register "reg_prox_ctrl8" = "0x8d" - register "reg_prox_ctrl9" = "0x43" - register "reg_prox_ctrl10" = "0x1f" - register "reg_prox_ctrl11" = "0x00" - register "reg_prox_ctrl12" = "0x00" - register "reg_prox_ctrl13" = "0x00" - register "reg_prox_ctrl14" = "0x00" - register "reg_prox_ctrl15" = "0x00" - register "reg_prox_ctrl16" = "0x00" - register "reg_prox_ctrl17" = "0x00" - register "reg_prox_ctrl18" = "0x00" - register "reg_prox_ctrl19" = "0x00" - register "reg_sar_ctrl0" = "0x50" - register "reg_sar_ctrl1" = "0x8a" - register "reg_sar_ctrl2" = "0x3c" + register "cs0_ground" = "0x0" + register "combined_sensors_count" = "3" + register "combined_sensors[0]" = "0" + register "combined_sensors[1]" = "1" + register "combined_sensors[2]" = "2" + register "resolution" = "SX9310_FINEST" + register "avg_pos_strength" = "512" + register "startup_sensor" = "0" + register "proxraw_strength" = "0" device i2c 28 on end end end diff --git a/src/mainboard/google/volteer/variants/volteer2/overridetree.cb b/src/mainboard/google/volteer/variants/volteer2/overridetree.cb index 916777c0a3..f517de246c 100644 --- a/src/mainboard/google/volteer/variants/volteer2/overridetree.cb +++ b/src/mainboard/google/volteer/variants/volteer2/overridetree.cb @@ -213,29 +213,14 @@ chip soc/intel/tigerlake register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" register "speed" = "I2C_SPEED_FAST" register "uid" = "0" - register "reg_prox_ctrl0" = "0x10" - register "reg_prox_ctrl1" = "0x00" - register "reg_prox_ctrl2" = "0x84" - register "reg_prox_ctrl3" = "0x0e" - register "reg_prox_ctrl4" = "0x07" - register "reg_prox_ctrl5" = "0xc6" - register "reg_prox_ctrl6" = "0x20" - register "reg_prox_ctrl7" = "0x0d" - register "reg_prox_ctrl8" = "0x8d" - register "reg_prox_ctrl9" = "0x43" - register "reg_prox_ctrl10" = "0x1f" - register "reg_prox_ctrl11" = "0x00" - register "reg_prox_ctrl12" = "0x00" - register "reg_prox_ctrl13" = "0x00" - register "reg_prox_ctrl14" = "0x00" - register "reg_prox_ctrl15" = "0x00" - register "reg_prox_ctrl16" = "0x00" - register "reg_prox_ctrl17" = "0x00" - register "reg_prox_ctrl18" = "0x00" - register "reg_prox_ctrl19" = "0x00" - register "reg_sar_ctrl0" = "0x50" - register "reg_sar_ctrl1" = "0x8a" - register "reg_sar_ctrl2" = "0x3c" + register "cs0_ground" = "0x0" + register "combined_sensors_count" = "3" + register "combined_sensors[0]" = "0" + register "combined_sensors[1]" = "1" + register "combined_sensors[2]" = "2" + register "avg_pos_strength" = "512" + register "startup_sensor" = "0" + register "proxraw_strength" = "0" device i2c 28 on end end end diff --git a/src/mainboard/google/volteer/variants/voxel/overridetree.cb b/src/mainboard/google/volteer/variants/voxel/overridetree.cb index ed90069ab4..c1002ef752 100644 --- a/src/mainboard/google/volteer/variants/voxel/overridetree.cb +++ b/src/mainboard/google/volteer/variants/voxel/overridetree.cb @@ -177,29 +177,15 @@ chip soc/intel/tigerlake register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" register "speed" = "I2C_SPEED_FAST" register "uid" = "0" - register "reg_prox_ctrl0" = "0x10" - register "reg_prox_ctrl1" = "0x00" - register "reg_prox_ctrl2" = "0x84" - register "reg_prox_ctrl3" = "0x0e" - register "reg_prox_ctrl4" = "0x07" - register "reg_prox_ctrl5" = "0xc6" - register "reg_prox_ctrl6" = "0x20" - register "reg_prox_ctrl7" = "0x0d" - register "reg_prox_ctrl8" = "0x8d" - register "reg_prox_ctrl9" = "0x43" - register "reg_prox_ctrl10" = "0x1f" - register "reg_prox_ctrl11" = "0x00" - register "reg_prox_ctrl12" = "0x00" - register "reg_prox_ctrl13" = "0x00" - register "reg_prox_ctrl14" = "0x00" - register "reg_prox_ctrl15" = "0x00" - register "reg_prox_ctrl16" = "0x00" - register "reg_prox_ctrl17" = "0x00" - register "reg_prox_ctrl18" = "0x00" - register "reg_prox_ctrl19" = "0x00" - register "reg_sar_ctrl0" = "0x50" - register "reg_sar_ctrl1" = "0x8a" - register "reg_sar_ctrl2" = "0x3c" + register "cs0_ground" = "0x0" + register "combined_sensors_count" = "3" + register "combined_sensors[0]" = "0" + register "combined_sensors[1]" = "1" + register "combined_sensors[2]" = "2" + register "resolution" = "SX9310_FINEST" + register "avg_pos_strength" = "512" + register "startup_sensor" = "0" + register "proxraw_strength" = "0" device i2c 28 on end end end |