summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/cpu/amd/model_lx/cpureginit.c19
-rw-r--r--src/mainboard/pcengines/alix1c/cache_as_ram_auto.c109
-rw-r--r--src/northbridge/amd/lx/raminit.c97
3 files changed, 175 insertions, 50 deletions
diff --git a/src/cpu/amd/model_lx/cpureginit.c b/src/cpu/amd/model_lx/cpureginit.c
index ef5a8b9d94..930762704e 100644
--- a/src/cpu/amd/model_lx/cpureginit.c
+++ b/src/cpu/amd/model_lx/cpureginit.c
@@ -205,7 +205,13 @@ void SetDelayControl(void)
}
}
}
+ print_debug("Try to write GLCP_DELAY_CONTROLS: hi ");
+ print_debug_hex32(msr.hi);
+ print_debug(" and lo ");
+ print_debug_hex32(msr.lo);
+ print_debug("\r\n");
wrmsr(GLCP_DELAY_CONTROLS, msr);
+ print_debug("SetDelayControl done\r\n");
return;
}
@@ -219,6 +225,7 @@ void cpuRegInit(void)
/* Castle 2.0 BTM periodic sync period. */
/* [40:37] 1 sync record per 256 bytes */
+ print_debug("Castle 2.0 BTM periodic sync period.\r\n");
msrnum = CPU_PF_CONF;
msr = rdmsr(msrnum);
msr.hi |= (0x8 << 5);
@@ -228,6 +235,7 @@ void cpuRegInit(void)
* LX performance setting.
* Enable Quack for fewer re-RAS on the MC
*/
+ print_debug("Enable Quack for fewer re-RAS on the MC\r\n");
msrnum = GLIU0_ARB;
msr = rdmsr(msrnum);
msr.hi &= ~ARB_UPPER_DACK_EN_SET;
@@ -240,22 +248,28 @@ void cpuRegInit(void)
msr.hi |= ARB_UPPER_QUACK_EN_SET;
wrmsr(msrnum, msr);
- /* GLIU port active enable, limit south pole masters (AES and PCI) to one outstanding transaction. */
+ /* GLIU port active enable, limit south pole masters
+ * (AES and PCI) to one outstanding transaction.
+ */
+ print_debug(" GLIU port active enable\r\n");
msrnum = GLIU1_PORT_ACTIVE;
msr = rdmsr(msrnum);
msr.lo &= ~0x880;
wrmsr(msrnum, msr);
/* Set the Delay Control in GLCP */
+ print_debug("Set the Delay Control in GLCP\r\n");
SetDelayControl();
/* Enable RSDC */
+ print_debug("Enable RSDC\r\n");
msrnum = CPU_AC_SMM_CTL;
msr = rdmsr(msrnum);
msr.lo |= SMM_INST_EN_SET;
wrmsr(msrnum, msr);
/* FPU imprecise exceptions bit */
+ print_debug("FPU imprecise exceptions bit\r\n");
msrnum = CPU_FPU_MSR_MODE;
msr = rdmsr(msrnum);
msr.lo |= FPU_IE_SET;
@@ -263,12 +277,14 @@ void cpuRegInit(void)
/* Power Savers (Do after BIST) */
/* Enable Suspend on HLT & PAUSE instructions */
+ print_debug("Enable Suspend on HLT & PAUSE instructions\r\n");
msrnum = CPU_XC_CONFIG;
msr = rdmsr(msrnum);
msr.lo |= XC_CONFIG_SUSP_ON_HLT | XC_CONFIG_SUSP_ON_PAUSE;
wrmsr(msrnum, msr);
/* Enable SUSP and allow TSC to run in Suspend (keep speed detection happy) */
+ print_debug("Enable SUSP and allow TSC to run in Suspend\r\n");
msrnum = CPU_BC_CONF_0;
msr = rdmsr(msrnum);
msr.lo |= TSC_SUSP_SET | SUSP_EN_SET;
@@ -286,6 +302,7 @@ void cpuRegInit(void)
#endif
/* Setup throttling delays to proper mode if it is ever enabled. */
+ print_debug("Setup throttling delays to proper mode\r\n");
msrnum = GLCP_TH_OD;
msr.hi = 0;
msr.lo = 0x00000603C;
diff --git a/src/mainboard/pcengines/alix1c/cache_as_ram_auto.c b/src/mainboard/pcengines/alix1c/cache_as_ram_auto.c
index 16aefc0961..087502f0d5 100644
--- a/src/mainboard/pcengines/alix1c/cache_as_ram_auto.c
+++ b/src/mainboard/pcengines/alix1c/cache_as_ram_auto.c
@@ -20,6 +20,7 @@
#define ASSEMBLY 1
#include <stdint.h>
+#include <spd.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pnp_def.h>
@@ -37,13 +38,70 @@
#define POST_CODE(x) outb(x, 0x80)
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-#include "southbridge/amd/cs5536/cs5536_early_smbus.c"
+/* The alix1c has no SMBUS; the setup is hard-wired. */
+void cs5536_enable_smbus(void)
+{
+}
+
#include "southbridge/amd/cs5536/cs5536_early_setup.c"
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
-static inline int spd_read_byte(unsigned device, unsigned address)
+/* the part is a hynix hy5du121622ctp-d43
+ * HY 5D U 12 16 2 2 C <blank> T <blank> P D43
+ * Hynix
+ * DDR SDRAM (5D)
+ * VDD 2.5 VDDQ 2.5 (U)
+ * 512M 8K REFRESH (12)
+ * x16 (16)
+ * 4banks (2)
+ * SSTL_2 (2)
+ * 4th GEN die (C)
+ * Normal Power Consumption (<blank> )
+ * TSOP (T)
+ * Single Die (<blank>)
+ * Lead Free (P)
+ * DDR400 3-3-3 (D43)
+ */
+/* spd array */
+static u8 spdbytes[] = {
+ [SPD_ACCEPTABLE_CAS_LATENCIES] = 0x10,
+ [SPD_BANK_DENSITY] = 0x40,
+ [SPD_DEVICE_ATTRIBUTES_GENERAL] = 0xff,
+ [SPD_MEMORY_TYPE] = 7,
+ [SPD_MIN_CYCLE_TIME_AT_CAS_MAX] = 10, /* This is a guess for tRAC value */
+ [SPD_MODULE_ATTRIBUTES] = 0xff, /* fix me later when we figure out */
+ [SPD_NUM_BANKS_PER_SDRAM] = 4,
+ [SPD_PRIMARY_SDRAM_WIDTH] = 8,
+ /* alix1c is 1 bank. */
+ [SPD_NUM_DIMM_BANKS] = 1,
+ [SPD_NUM_COLUMNS] = 0xa,
+ [SPD_NUM_ROWS] = 3,
+ [SPD_REFRESH] = 0x3a,
+ [SPD_SDRAM_CYCLE_TIME_2ND] = 60,
+ [SPD_SDRAM_CYCLE_TIME_3RD] = 75,
+ [SPD_tRAS] = 40,
+ [SPD_tRCD] = 15,
+ [SPD_tRFC] = 70,
+ [SPD_tRP] = 15,
+ [SPD_tRRD] = 10,
+};
+
+static u8 spd_read_byte(unsigned device, unsigned address)
{
- return smbus_read_byte(device, address);
+ print_debug("spd_read_byte dev ");
+ print_debug_hex8(device);
+
+ if (device != (0x50<<1)){
+ print_debug(" returns 0xff\n");
+ return 0xff;
+ }
+
+ print_debug(" addr ");
+ print_debug_hex8(address);
+ print_debug(" returns ");
+ print_debug_hex8(spdbytes[address]);
+ print_debug("\r\n");
+ return spdbytes[address];
}
#define ManualConf 0 /* Do automatic strapped PLL config */
@@ -83,13 +141,12 @@ static void mb_gpio_init(void)
void cache_as_ram_main(void)
{
+ static const struct mem_controller memctrl[] = {
+ {.channel0 = {0x50}},
+ };
extern void RestartCAR();
POST_CODE(0x01);
- static const struct mem_controller memctrl [] = {
- {.channel0 = {(0xa<<3)|0, (0xa<<3)|1}}
- };
-
SystemPreInit();
msr_init();
@@ -114,24 +171,34 @@ void cache_as_ram_main(void)
/* Check memory */
ram_check(0x00000000, 640 * 1024);
- /* Switch from Cache as RAM to real RAM */
- /* There are two ways we could think about this.
- 1. If we are using the auto.inc ROMCC way, the stack is going to be re-setup in the code following this code.
- Just wbinvd the stack to clear the cache tags. We don't care where the stack used to be.
- 2. This file is built as a normal .c -> .o and linked in etc. The stack might be used to return etc.
- That means we care about what is in the stack. If we are smart we set the CAR stack to the same location
- as the rest of LinuxBIOS. If that is the case we can just do a wbinvd. The stack will be written into real
- RAM that is now setup and we continue like nothing happened. If the stack is located somewhere other than
- where LB would like it, you need to write some code to do a copy from cache to RAM
-
- We use method 1 on Norwich and on this board too.
- */
+ /* Switch from Cache as RAM to real RAM
+ * There are two ways we could think about this.
+ *
+ * 1. If we are using the auto.inc ROMCC way, the stack is
+ * going to be re-setup in the code following this code. Just
+ * wbinvd the stack to clear the cache tags. We don't care
+ * where the stack used to be.
+ *
+ * 2. This file is built as a normal .c -> .o and linked in
+ * etc. The stack might be used to return etc. That means we
+ * care about what is in the stack. If we are smart we set
+ * the CAR stack to the same location as the rest of
+ * LinuxBIOS. If that is the case we can just do a wbinvd.
+ * The stack will be written into real RAM that is now setup
+ * and we continue like nothing happened. If the stack is
+ * located somewhere other than where LB would like it, you
+ * need to write some code to do a copy from cache to RAM
+ *
+ * We use method 1 on Norwich and on this board too.
+ */
POST_CODE(0x02);
print_err("POST 02\n");
__asm__("wbinvd\n");
print_err("Past wbinvd\n");
- /* we are finding the return does not work on this board. Explicitly call the label that is
- * after the call to us. This is gross, but sometimes at this level it is the only way out
+ /* we are finding the return does not work on this
+ * board. Explicitly call the label that is after the call to
+ * us. This is gross, but sometimes at this level it is the
+ * only way out
*/
done_cache_as_ram_main();
}
diff --git a/src/northbridge/amd/lx/raminit.c b/src/northbridge/amd/lx/raminit.c
index 9981f58cae..e65a87e20f 100644
--- a/src/northbridge/amd/lx/raminit.c
+++ b/src/northbridge/amd/lx/raminit.c
@@ -27,6 +27,23 @@ static const unsigned char NumColAddr[] = {
0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F
};
+void banner(char *s)
+{
+ print_emerg("===========================");
+ print_emerg(s);
+ print_emerg("======================================\r\n");
+}
+void hcf(void)
+{
+ print_emerg("DIE\r\n");
+ /* this guarantees we flush the UART fifos (if any) and also
+ * ensures that things, in general, keep going so no debug output
+ * is lost
+ */
+ while (1)
+ print_emerg_char(0);
+}
+
static void auto_size_dimm(unsigned int dimm)
{
uint32_t dimm_setting;
@@ -36,33 +53,37 @@ static void auto_size_dimm(unsigned int dimm)
dimm_setting = 0;
+ banner("Check present");
/* Check that we have a dimm */
if (spd_read_byte(dimm, SPD_MEMORY_TYPE) == 0xFF) {
return;
}
+ banner("MODBANKS");
/* Field: Module Banks per DIMM */
/* EEPROM byte usage: (5) Number of DIMM Banks */
spd_byte = spd_read_byte(dimm, SPD_NUM_DIMM_BANKS);
- if ((MIN_MOD_BANKS > spd_byte) && (spd_byte > MAX_MOD_BANKS)) {
- print_debug("Number of module banks not compatible\n");
+ if ((MIN_MOD_BANKS > spd_byte) || (spd_byte > MAX_MOD_BANKS)) {
+ print_emerg("Number of module banks not compatible\n");
POST_CODE(ERROR_BANK_SET);
- __asm__ __volatile__("hlt\n");
+ hcf();
}
dimm_setting |= (spd_byte >> 1) << CF07_UPPER_D0_MB_SHIFT;
+ banner("FIELDBANKS");
/* Field: Banks per SDRAM device */
/* EEPROM byte usage: (17) Number of Banks on SDRAM Device */
spd_byte = spd_read_byte(dimm, SPD_NUM_BANKS_PER_SDRAM);
- if ((MIN_DEV_BANKS > spd_byte) && (spd_byte > MAX_DEV_BANKS)) {
- print_debug("Number of device banks not compatible\n");
+ if ((MIN_DEV_BANKS > spd_byte) || (spd_byte > MAX_DEV_BANKS)) {
+ print_emerg("Number of device banks not compatible\n");
POST_CODE(ERROR_BANK_SET);
- __asm__ __volatile__("hlt\n");
+ hcf();
}
dimm_setting |= (spd_byte >> 2) << CF07_UPPER_D0_CB_SHIFT;
+ banner("SPDNUMROWS");
/*; Field: DIMM size
- *; EEPROM byte usage: (3) Number or Row Addresses
+ *; EEPROM byte usage: (3) Number of Row Addresses
*; (4) Number of Column Addresses
*; (5) Number of DIMM Banks
*; (31) Module Bank Density
@@ -70,24 +91,29 @@ static void auto_size_dimm(unsigned int dimm)
*/
if ((spd_read_byte(dimm, SPD_NUM_ROWS) & 0xF0)
|| (spd_read_byte(dimm, SPD_NUM_COLUMNS) & 0xF0)) {
- print_debug("Assymetirc DIMM not compatible\n");
+ print_emerg("Assymetirc DIMM not compatible\n");
POST_CODE(ERROR_UNSUPPORTED_DIMM);
- __asm__ __volatile__("hlt\n");
+ hcf();
}
+ banner("SPDBANKDENSITY");
dimm_size = spd_read_byte(dimm, SPD_BANK_DENSITY);
+ banner("DIMMSIZE");
dimm_size |= (dimm_size << 8); /* align so 1GB(bit0) is bit 8, this is a little weird to get gcc to not optimize this out */
dimm_size &= 0x01FC; /* and off 2GB DIMM size : not supported and the 1GB size we just moved up to bit 8 as well as all the extra on top */
/* Module Density * Module Banks */
dimm_size <<= (dimm_setting >> CF07_UPPER_D0_MB_SHIFT) & 1; /* shift to multiply by # DIMM banks */
+ banner("BEFORT CTZ");
dimm_size = __builtin_ctz(dimm_size);
+ banner("TEST DIMM SIZE>8");
if (dimm_size > 8) { /* 8 is 1GB only support 1GB per DIMM */
- print_debug("Only support up to 1 GB per DIMM\n");
+ print_emerg("Only support up to 1 GB per DIMM\n");
POST_CODE(ERROR_DENSITY_DIMM);
- __asm__ __volatile__("hlt\n");
+ hcf();
}
dimm_setting |= dimm_size << CF07_UPPER_D0_SZ_SHIFT;
+ banner("PAGESIZE");
/*; Field: PAGE size
*; EEPROM byte usage: (4) Number of Column Addresses
@@ -113,18 +139,22 @@ static void auto_size_dimm(unsigned int dimm)
*;it adds 3 to get 10, then does 2^10=1K. Get it?*/
spd_byte = NumColAddr[spd_read_byte(dimm, SPD_NUM_COLUMNS) & 0xF];
+ banner("MAXCOLADDR");
if (spd_byte > MAX_COL_ADDR) {
- print_debug("DIMM page size not compatible\n");
+ print_emerg("DIMM page size not compatible\n");
POST_CODE(ERROR_SET_PAGE);
- __asm__ __volatile__("hlt\n");
+ hcf();
}
+ banner(">12address test");
spd_byte -= 7;
if (spd_byte > 5) { /* if the value is above 6 it means >12 address lines */
spd_byte = 7; /* which means >32k so set to disabled */
}
dimm_setting |= spd_byte << CF07_UPPER_D0_PSZ_SHIFT; /* 0=1k,1=2k,2=4k,etc */
+ banner("RDMSR CF07");
msr = rdmsr(MC_CF07_DATA);
+ banner("WRMSR CF07");
if (dimm == DIMM0) {
msr.hi &= 0xFFFF0000;
msr.hi |= dimm_setting;
@@ -133,6 +163,7 @@ static void auto_size_dimm(unsigned int dimm)
msr.hi |= dimm_setting << 16;
}
wrmsr(MC_CF07_DATA, msr);
+ banner("ALL DONE");
}
static void checkDDRMax(void)
@@ -152,9 +183,9 @@ static void checkDDRMax(void)
/* I don't think you need this check.
if (spd_byte0 >= 0xA0 || spd_byte1 >= 0xA0){
- print_debug("DIMM overclocked. Check GeodeLink Speed\n");
+ print_emerg("DIMM overclocked. Check GeodeLink Speed\n");
POST_CODE(POST_PLL_MEM_FAIL);
- __asm__ __volatile__("hlt\n");
+ hcf();
} */
/* Use the slowest DIMM */
@@ -167,9 +198,9 @@ static void checkDDRMax(void)
/* current speed > max speed? */
if (GeodeLinkSpeed() > speed) {
- print_debug("DIMM overclocked. Check GeodeLink Speed\r\n");
+ print_emerg("DIMM overclocked. Check GeodeLink Speed\r\n");
POST_CODE(POST_PLL_MEM_FAIL);
- __asm__ __volatile__("hlt\n");
+ hcf();
}
}
@@ -308,9 +339,9 @@ static void setCAS(void)
} else if ((casmap0 &= casmap1)) {
spd_byte = CASDDR[__builtin_ctz((uint32_t) casmap0)];
} else {
- print_debug("DIMM CAS Latencies not compatible\r\n");
+ print_emerg("DIMM CAS Latencies not compatible\r\n");
POST_CODE(ERROR_DIFF_DIMMS);
- __asm__ __volatile__("hlt\n");
+ hcf();
}
msr = rdmsr(MC_CF8F_DATA);
@@ -500,7 +531,7 @@ static void EnableMTest(void)
msr.lo |= CFCLK_LOWER_TRISTATE_DIS_SET;
wrmsr(MC_CFCLK_DBUG, msr);
- print_debug("Enabled MTest for TLA debug\r\n");
+ print_info("Enabled MTest for TLA debug\r\n");
}
static void sdram_set_registers(const struct mem_controller *ctrl)
@@ -537,43 +568,53 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl)
{
uint8_t spd_byte;
+ banner("sdram_set_spd_register\n");
POST_CODE(POST_MEM_SETUP); // post_70h
spd_byte = spd_read_byte(DIMM0, SPD_MODULE_ATTRIBUTES);
+ banner("Check DIMM 0");
/* Check DIMM is not Register and not Buffered DIMMs. */
if ((spd_byte != 0xFF) && (spd_byte & 3)) {
- print_debug("DIMM0 NOT COMPATIBLE\r\n");
+ print_emerg("DIMM0 NOT COMPATIBLE\r\n");
POST_CODE(ERROR_UNSUPPORTED_DIMM);
- __asm__ __volatile__("hlt\n");
+ hcf();
}
+ banner("Check DIMM 1");
spd_byte = spd_read_byte(DIMM1, SPD_MODULE_ATTRIBUTES);
if ((spd_byte != 0xFF) && (spd_byte & 3)) {
- print_debug("DIMM1 NOT COMPATIBLE\n");
+ print_emerg("DIMM1 NOT COMPATIBLE\n");
POST_CODE(ERROR_UNSUPPORTED_DIMM);
- __asm__ __volatile__("hlt\n");
+ hcf();
}
POST_CODE(POST_MEM_SETUP2); // post_72h
+ banner("Check DDR MAX");
/* Check that the memory is not overclocked. */
checkDDRMax();
/* Size the DIMMS */
POST_CODE(POST_MEM_SETUP3); // post_73h
+ banner("AUTOSIZE DIMM 0");
auto_size_dimm(DIMM0);
POST_CODE(POST_MEM_SETUP4); // post_74h
+ banner("AUTOSIZE DIMM 1");
auto_size_dimm(DIMM1);
/* Set CAS latency */
+ banner("set cas latency");
POST_CODE(POST_MEM_SETUP5); // post_75h
setCAS();
/* Set all the other latencies here (tRAS, tRP....) */
+ banner("set all latency");
set_latencies();
/* Set Extended Mode Registers */
+ banner("set emrs");
set_extended_mode_registers();
+ banner("set ref rate");
/* Set Memory Refresh Rate */
set_refresh_rate();
@@ -607,9 +648,9 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
msr = rdmsr(MC_CF07_DATA);
if ((msr.hi & ((7 << CF07_UPPER_D1_PSZ_SHIFT) | (7 << CF07_UPPER_D0_PSZ_SHIFT))) ==
((7 << CF07_UPPER_D1_PSZ_SHIFT) | (7 << CF07_UPPER_D0_PSZ_SHIFT))) {
- print_debug("No memory in the system\r\n");
+ print_emerg("No memory in the system\r\n");
POST_CODE(ERROR_NO_DIMMS);
- __asm__ __volatile__("hlt\n");
+ hcf();
}
/* Set CKEs */
@@ -717,7 +758,7 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
msr.lo |= (209 << 8); /* bits[15:8] = 209 */
wrmsr(msrnum, msr);
- print_debug("DRAM controller init done.\n");
+ print_emerg("DRAM controller init done.\n");
POST_CODE(POST_MEM_SETUP_GOOD); //0x7E
/* make sure there is nothing stale in the cache */
@@ -749,6 +790,6 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
msr.lo |= 1;
wrmsr(msrnum, msr);
}
- print_debug("RAM DLL lock\n");
+ print_info("RAM DLL lock\n");
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 02:51:43 +0000