diff options
Diffstat (limited to 'src')
27 files changed, 43 insertions, 43 deletions
diff --git a/src/drivers/maxim/max77686/max77686.h b/src/drivers/maxim/max77686/max77686.h index 0769a74d53..f5b85c0acf 100644 --- a/src/drivers/maxim/max77686/max77686.h +++ b/src/drivers/maxim/max77686/max77686.h @@ -77,8 +77,8 @@ enum { }; enum { - MAX77686_MV = 0, /* mili volt */ - MAX77686_UV /* micro volt */ + MAX77686_MV = 0, /* millivolt */ + MAX77686_UV /* microvolt */ }; /** diff --git a/src/drivers/maxim/max77802/max77802.h b/src/drivers/maxim/max77802/max77802.h index 5823269514..f880cb4a26 100644 --- a/src/drivers/maxim/max77802/max77802.h +++ b/src/drivers/maxim/max77802/max77802.h @@ -199,7 +199,7 @@ enum { #define MAX77802_BUCK_TYPE2_ON (1 << 4) #define MAX77802_BUCK_TYPE2_IGNORE_PWRREQ (1 << 5) -/* LDO35 1.2 volt value for bridge ic */ +/* LDO35 1.2 volt value for bridge IC */ #define MAX77802_LDO35CTRL1_1_2V (1 << 4) #define MAX77802_LOD35CTRL1_ON (1 << 6) diff --git a/src/drivers/mipi/panel-CMN_P097PFG_SSD2858.c b/src/drivers/mipi/panel-CMN_P097PFG_SSD2858.c index 637533e648..0336b63afe 100644 --- a/src/drivers/mipi/panel-CMN_P097PFG_SSD2858.c +++ b/src/drivers/mipi/panel-CMN_P097PFG_SSD2858.c @@ -21,7 +21,7 @@ struct panel_serializable_data P097PFG_SSD2858 = { .init = { PANEL_GENERIC(0xff, 0x00), /* LOCKCNT=0x1f4, MRX=0, POSTDIV=1 (/2} }, MULT=0x49 - * 27 Mhz => 985.5 Mhz */ + * 27 MHz => 985.5 MHz */ PANEL_GENERIC(0x00, 0x08, 0x01, 0xf4, 0x01, 0x49), /* MTXDIV=1, SYSDIV=3 (=> 4) */ PANEL_GENERIC(0x00, 0x0c, 0x00, 0x00, 0x00, 0x03), @@ -34,7 +34,7 @@ struct panel_serializable_data P097PFG_SSD2858 = { PANEL_GENERIC(0x10, 0x08, 0x01, 0x20, 0x08, 0x45), PANEL_GENERIC(0x10, 0x1c, 0x00, 0x00, 0x00, 0x00), PANEL_GENERIC(0x20, 0x0c, 0x00, 0x00, 0x00, 0x04), - /* Pixel clock 985.5 Mhz * 0x49/0x4b = 959 Mhz */ + /* Pixel clock 985.5 MHz * 0x49/0x4b = 959 MHz */ PANEL_GENERIC(0x20, 0x10, 0x00, 0x4b, 0x00, 0x49), PANEL_GENERIC(0x20, 0xa0, 0x00, 0x00, 0x00, 0x00), /* EOT=1, LPE = 0, LSOUT=4 lanes, LPD=25 */ diff --git a/src/drivers/mrc_cache/mrc_cache.c b/src/drivers/mrc_cache/mrc_cache.c index bb560c89bd..17f5fee727 100644 --- a/src/drivers/mrc_cache/mrc_cache.c +++ b/src/drivers/mrc_cache/mrc_cache.c @@ -431,7 +431,7 @@ static void log_event_cache_update(uint8_t slot, enum result res) /* During ramstage this code purposefully uses incoherent transactions between * read and write. The read assumes a memory-mapped boot device that can be used * to quickly locate and compare the up-to-date data. However, when an update - * is required it uses the writeable region access to perform the update. */ + * is required it uses the writable region access to perform the update. */ static void update_mrc_cache_by_type(int type, struct mrc_metadata *new_md, const void *new_data, diff --git a/src/drivers/net/atl1e.c b/src/drivers/net/atl1e.c index 191a9c55eb..fb9bcde78d 100644 --- a/src/drivers/net/atl1e.c +++ b/src/drivers/net/atl1e.c @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0-only */ /* - * This driver sets the macaddress of a Atheros AR8121/AR8113/AR8114 + * This driver sets the MAC address of an Atheros AR8121/AR8113/AR8114 */ #include <device/mmio.h> diff --git a/src/drivers/ocp/include/vpd.h b/src/drivers/ocp/include/vpd.h index 60299e38fd..8ed6a56cee 100644 --- a/src/drivers/ocp/include/vpd.h +++ b/src/drivers/ocp/include/vpd.h @@ -64,7 +64,7 @@ enum cxl_memory_mode { #define DISABLE_BOOTDRIVE "disable_bootdrive" #define DISABLE_BOOTDRIVE_DEFAULT 0 /* By default don't disable */ -/* Skip Global reset so that information in Previous Boot Error Hob won't be cleared */ +/* Skip Global reset so that information in Previous Boot Error HOB won't be cleared */ #define SKIP_GLOBAL_RESET "skip_global_reset" #define SKIP_GLOBAL_RESET_DEFAULT 1 diff --git a/src/drivers/smmstore/store.c b/src/drivers/smmstore/store.c index e0f0f57097..bc3dcdccac 100644 --- a/src/drivers/smmstore/store.c +++ b/src/drivers/smmstore/store.c @@ -185,7 +185,7 @@ static enum cb_err scan_end(struct region_device *store) if (k_sz != 0xffffffff) { printk(BIOS_WARNING, - "eof of data marker looks invalid: 0x%x\n", k_sz); + "EOF of data marker looks invalid: 0x%x\n", k_sz); return CB_ERR; } diff --git a/src/drivers/spi/spi-generic.c b/src/drivers/spi/spi-generic.c index ef7438ed5f..f45ec25dcb 100644 --- a/src/drivers/spi/spi-generic.c +++ b/src/drivers/spi/spi-generic.c @@ -101,7 +101,7 @@ unsigned int spi_crop_chunk(const struct spi_slave *slave, unsigned int cmd_len, /* Subtract command length from usable buffer size. If deduct_opcode_len is set, only subtract the number command bytes after the opcode. If the adjusted cmd_len is larger than ctrlr_max - return 0 to inidicate an error. */ + return 0 to indicate an error. */ if (deduct_cmd_len) { if (ctrlr_max >= cmd_len) { ctrlr_max -= cmd_len; diff --git a/src/drivers/spi/spi_flash_internal.h b/src/drivers/spi/spi_flash_internal.h index 1927111891..61113742cb 100644 --- a/src/drivers/spi/spi_flash_internal.h +++ b/src/drivers/spi/spi_flash_internal.h @@ -112,7 +112,7 @@ extern const struct spi_flash_vendor_info spi_flash_atmel_vi; extern const struct spi_flash_vendor_info spi_flash_eon_vi; extern const struct spi_flash_vendor_info spi_flash_gigadevice_vi; extern const struct spi_flash_vendor_info spi_flash_macronix_vi; -/* Probing order matters between the spansion sequence. */ +/* Probing order matters between the Spansion sequence. */ extern const struct spi_flash_vendor_info spi_flash_spansion_ext1_vi; extern const struct spi_flash_vendor_info spi_flash_spansion_ext2_vi; extern const struct spi_flash_vendor_info spi_flash_spansion_vi; diff --git a/src/drivers/spi/spi_sdcard.c b/src/drivers/spi/spi_sdcard.c index 36d882d9e1..6a7fbf95cf 100644 --- a/src/drivers/spi/spi_sdcard.c +++ b/src/drivers/spi/spi_sdcard.c @@ -207,7 +207,7 @@ static int response_resolve(int response_type, uint8_t *response, { __maybe_unused static const char * const sd_err[] = { "Card is locked", - "wp erase skip | lock/unlok cmd failed", + "wp erase skip | lock/unlock cmd failed", "error", "CC error", "card err failed", @@ -302,7 +302,7 @@ static int spi_sdcard_do_command_help(const struct spi_sdcard *card, /* send crc */ spi_sdcard_sendbyte(card, crc); - /* waitting for response */ + /* waiting for response */ wait = 0xffff; while (((c = spi_sdcard_recvbyte(card)) & 0x80) && --wait) ; @@ -318,7 +318,7 @@ static int spi_sdcard_do_command_help(const struct spi_sdcard *card, } if (type == RSP_R1b) { - /* waitting done */ + /* waiting done */ wait = 0xffffff; while (c == 0 && --wait) c = spi_sdcard_recvbyte(card); @@ -368,7 +368,7 @@ size_t spi_sdcard_size(const struct spi_sdcard *card) /* enable CS */ spi_sdcard_enable_cs(card); - /* waitting start block token */ + /* waiting start block token */ wait = 0xffff; while ((spi_sdcard_recvbyte(card) != CT_BLOCK_START) && --wait) ; @@ -505,7 +505,7 @@ int spi_sdcard_single_read(const struct spi_sdcard *card, /* enable cs */ spi_sdcard_enable_cs(card); - /* waitting start block token */ + /* waiting start block token */ wait = 0xffff; while ((spi_sdcard_recvbyte(card) != CT_BLOCK_START) && --wait) ; @@ -558,7 +558,7 @@ int spi_sdcard_multiple_read(const struct spi_sdcard *card, for (int i = 0; i < block_num; i++) { uint16_t c = 0; - /* waitting start block token */ + /* waiting start block token */ wait = 0xffff; while ((spi_sdcard_recvbyte(card) != CT_BLOCK_START) && --wait) ; @@ -662,7 +662,7 @@ int spi_sdcard_single_write(const struct spi_sdcard *card, if (spi_sdcard_do_command(card, WRITE_BLOCK, block_address, NULL)) return -1; - /* eanbele cs */ + /* enable cs */ spi_sdcard_enable_cs(card); /* send start block token */ diff --git a/src/drivers/spi/tpm/tpm.c b/src/drivers/spi/tpm/tpm.c index 13f44f9448..d9c3a6dc1c 100644 --- a/src/drivers/spi/tpm/tpm.c +++ b/src/drivers/spi/tpm/tpm.c @@ -2,7 +2,7 @@ /* This is a driver for a SPI interfaced TPM2 device. * * It assumes that the required SPI interface has been initialized before the - * driver is started. A 'sruct spi_slave' pointer passed at initialization is + * driver is started. A 'struct spi_slave' pointer passed at initialization is * used to direct traffic to the correct SPI interface. This driver does not * provide a way to instantiate multiple TPM devices. Also, to keep things * simple, the driver unconditionally uses of TPM locality zero. @@ -134,7 +134,7 @@ static enum cb_err start_transaction(int read_write, size_t bytes, unsigned int * flow control (Section "6.4.5 Flow Control"). * * Again, the slave (TPM device) expects each transaction to start - * with a 4 byte header trasmitted by master. The header indicates if + * with a 4 byte header transmitted by master. The header indicates if * the master needs to read or write a register, and the register * address. * @@ -231,7 +231,7 @@ static void trace_dump(const char *prefix, uint32_t reg, /* * Data read from or written to FIFO or not in 4 byte - * quantiites is printed byte at a time. + * quantities is printed byte at a time. */ for (i = 0; i < bytes; i++) { if (current_char && @@ -697,7 +697,7 @@ size_t tpm2_process_command(const void *tpm2_command, size_t command_size, if (debug_level_) printk(BIOS_DEBUG, "\n"); - /* Verify that 'data available' is not asseretd any more. */ + /* Verify that 'data available' is not asserted any more. */ read_tpm_sts(&status); if ((status & expected_status_bits) != TPM_STS_VALID) { printk(BIOS_ERR, "unexpected final status %#x\n", status); diff --git a/src/drivers/spi/tpm/tpm.h b/src/drivers/spi/tpm/tpm.h index da15a73bd8..0d238e8011 100644 --- a/src/drivers/spi/tpm/tpm.h +++ b/src/drivers/spi/tpm/tpm.h @@ -11,7 +11,7 @@ #define TPM_LOCALITY_0_SPI_BASE 0x00d40000 /* - * A tpm device descriptor, values read from the appropriate device regisrers + * A TPM device descriptor, values read from the appropriate device registers * are cached here. */ struct tpm2_info { @@ -33,7 +33,7 @@ tpm_result_t tpm2_init(struct spi_slave *spi_if); * Each command processing consists of sending the command to the TPM, by * writing it into the FIFO register, then polling the status register until * the TPM is ready to respond, then reading the response from the FIFO - * regitster. The size of the response can be gleaned from the 6 byte header. + * register. The size of the response can be gleaned from the 6 byte header. * * This function places the response into the tpm2_response buffer and returns * the size of the response. diff --git a/src/drivers/tpm/ppi.c b/src/drivers/tpm/ppi.c index 3e74314d85..6f12b411ba 100644 --- a/src/drivers/tpm/ppi.c +++ b/src/drivers/tpm/ppi.c @@ -647,7 +647,7 @@ void tpm_ppi_acpi_fill_ssdt(const struct device *dev) /* * Returns One if the PPI spec supports this functions. - * That doesn't necessarily mean that the firmware implemtents it, or the + * That doesn't necessarily mean that the firmware implements it, or the * TPM can execute the function. * * Arg0: Integer PPI function diff --git a/src/drivers/wifi/generic/acpi.c b/src/drivers/wifi/generic/acpi.c index 3996739d62..f55fca7748 100644 --- a/src/drivers/wifi/generic/acpi.c +++ b/src/drivers/wifi/generic/acpi.c @@ -471,7 +471,7 @@ static void emit_sar_acpi_structures(const struct device *dev, struct dsm_profil if (dev->path.type == DEVICE_PATH_PCI && dev->vendor != PCI_VID_INTEL) return; - /* Retrieve the sar limits data */ + /* Retrieve the SAR limits data */ if (get_wifi_sar_limits(&sar_limits) < 0) { printk(BIOS_ERR, "failed getting SAR limits!\n"); return; @@ -549,7 +549,7 @@ static void wifi_ssdt_write_properties(const struct device *dev, const char *sco struct dsm_profile dsm = {0}; uint8_t dsm_count = 0; - /* Fill Wifi sar related ACPI structures */ + /* Fill Wifi SAR related ACPI structures */ if (CONFIG(USE_SAR)) { emit_sar_acpi_structures(dev, &dsm); diff --git a/src/ec/lenovo/h8/h8.c b/src/ec/lenovo/h8/h8.c index f41691f1fa..9b7bcc3fa2 100644 --- a/src/ec/lenovo/h8/h8.c +++ b/src/ec/lenovo/h8/h8.c @@ -53,7 +53,7 @@ enum battery { /* h8 charge priority. Defines if primary or secondary * battery is charged first. - * Because NVRAM is complete the otherway around as this register, + * Because NVRAM is complete the other way around as this register, * it's inverted by if */ static void h8_charge_priority(enum battery battery) diff --git a/src/include/acpi/acpi.h b/src/include/acpi/acpi.h index 1684e71840..01504ce7d3 100644 --- a/src/include/acpi/acpi.h +++ b/src/include/acpi/acpi.h @@ -1727,8 +1727,8 @@ void acpi_create_slit(acpi_slit_t *slit, /* * Create a Memory Proximity Domain Attributes structure for HMAT, - * given proximity domain for the attached initiaor, and - * proximimity domain for the memory. + * given proximity domain for the attached initiator, and + * proximity domain for the memory. */ int acpi_create_hmat_mpda(acpi_hmat_mpda_t *mpda, u32 initiator, u32 memory); /* Create Heterogeneous Memory Attribute Table */ diff --git a/src/include/boot_device.h b/src/include/boot_device.h index 84bd16ef65..883f37c8c8 100644 --- a/src/include/boot_device.h +++ b/src/include/boot_device.h @@ -63,7 +63,7 @@ int boot_device_wp_region(const struct region_device *rd, void boot_device_init(void); /* - * Restrict read/write access to the bootmedia using platform defined rules. + * Restrict read/write access to the boot-media using platform defined rules. */ #if CONFIG(BOOTMEDIA_LOCK_NONE) || (CONFIG(BOOTMEDIA_LOCK_IN_VERSTAGE) && ENV_RAMSTAGE) static inline void boot_device_security_lockdown(void) {} diff --git a/src/include/bootstate.h b/src/include/bootstate.h index a1743a81ab..30231ce568 100644 --- a/src/include/bootstate.h +++ b/src/include/bootstate.h @@ -51,7 +51,7 @@ * | * BS_OS_RESUME_CHECK -------- BS_OS_RESUME * | | - * BS_WRITE_TABLES os handoff + * BS_WRITE_TABLES OS handoff * | * BS_PAYLOAD_LOAD * | diff --git a/src/include/cpu/x86/mp.h b/src/include/cpu/x86/mp.h index 343bd9c4fa..dd86dce2c5 100644 --- a/src/include/cpu/x86/mp.h +++ b/src/include/cpu/x86/mp.h @@ -75,7 +75,7 @@ struct mp_ops { uintptr_t staggered_smbase); /* * Optionally provide a callback that is called after the APs - * and the BSP have gone through the initialion sequence. + * and the BSP have gone through the initialization sequence. */ void (*post_mp_init)(void); }; diff --git a/src/include/device/device.h b/src/include/device/device.h index 113969ca1d..41ec528cbd 100644 --- a/src/include/device/device.h +++ b/src/include/device/device.h @@ -229,7 +229,7 @@ void mp_init_cpus(DEVTREE_CONST struct bus *cpu_bus); static inline void mp_cpu_bus_init(struct device *dev) { /* - * When no LAPIC device is specified in the devietree inside the CPU cluster device, + * When no LAPIC device is specified in the devicetree inside the CPU cluster device, * neither a LAPIC device nor the link/bus between the CPU cluster and the LAPIC device * will be present in the static device tree and the link_list struct element of the * CPU cluster device will be NULL. In this case add one link, so that the diff --git a/src/include/device/dram/ddr2.h b/src/include/device/dram/ddr2.h index 032d5ce4cc..f3605b289d 100644 --- a/src/include/device/dram/ddr2.h +++ b/src/include/device/dram/ddr2.h @@ -92,7 +92,7 @@ struct dimm_attr_ddr2_st { u8 rev; /* Supported CAS mask, bit 0 == CL0 .. bit7 == CL7 */ u8 cas_supported; - /* Maximum cloclk to data cycle times for various CAS. + /* Maximum clock to data cycle times for various CAS. * Fields 0 and 1 are unused. */ u32 cycle_time[8]; /* Maximum data access times for various CAS. diff --git a/src/include/device/pci_def.h b/src/include/device/pci_def.h index 9ecd50ab2d..8b90163a1e 100644 --- a/src/include/device/pci_def.h +++ b/src/include/device/pci_def.h @@ -24,7 +24,7 @@ #define PCI_STATUS 0x06 /* 16 bits */ #define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */ -#define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz PCI 2.1 bus */ +#define PCI_STATUS_66MHZ 0x20 /* Support 66 MHz PCI 2.1 bus */ /* Support User Definable Features [obsolete] */ #define PCI_STATUS_UDF 0x40 #define PCI_STATUS_FAST_BACK 0x80 /* Accept fast-back to back */ diff --git a/src/include/input-event-codes.h b/src/include/input-event-codes.h index ff72a4539d..ad98abd5d5 100644 --- a/src/include/input-event-codes.h +++ b/src/include/input-event-codes.h @@ -755,7 +755,7 @@ #define KEY_MACRO_PRESET3 0x2b5 /* - * Some keyboards have a buildin LCD panel where the contents are controlled + * Some keyboards have a built-in LCD panel where the contents are controlled * by the host. Often these have a number of keys directly below the LCD * intended for controlling a menu shown on the LCD. These keys often don't * have any labeling so we just name them KEY_KBD_LCD_MENU# diff --git a/src/include/nhlt.h b/src/include/nhlt.h index 5d7564bd76..c4c71c2f48 100644 --- a/src/include/nhlt.h +++ b/src/include/nhlt.h @@ -27,7 +27,7 @@ struct nhlt_format_config; * Most code should use the SoC variants of the functions because * there is required logic needed to be performed by the SoC. The SoC * code should be abstracting the inner details of these functions that - * specically apply to NHLT objects for that SoC. + * specifically apply to NHLT objects for that SoC. * * An example sequence: * @@ -146,7 +146,7 @@ uintptr_t nhlt_serialize(struct nhlt *nhlt, uintptr_t acpi_addr); * Serialize NHLT object to ACPI table. Take in the beginning address of where * the table will reside oem_id and oem_table_id and return the address of the * next ACPI table. On error 0 will be returned. The NHLT object is no longer - * valid after thisfunction is called. + * valid after this function is called. */ uintptr_t nhlt_serialize_oem_overrides(struct nhlt *nhlt, uintptr_t acpi_addr, const char *oem_id, const char *oem_table_id, diff --git a/src/include/rmodule.h b/src/include/rmodule.h index 1925dcc951..bf26ad0b70 100644 --- a/src/include/rmodule.h +++ b/src/include/rmodule.h @@ -16,7 +16,7 @@ enum { struct rmodule; -/* Public API for loading rmdoules. */ +/* Public API for loading rmodules. */ int rmodule_parse(void *ptr, struct rmodule *m); void *rmodule_parameters(const struct rmodule *m); void *rmodule_entry(const struct rmodule *m); diff --git a/src/lib/ramdetect.c b/src/lib/ramdetect.c index 328ca07a62..cfec0296e7 100644 --- a/src/lib/ramdetect.c +++ b/src/lib/ramdetect.c @@ -18,7 +18,7 @@ int __weak probe_mb(const uintptr_t dram_start, const uintptr_t size) void *ptr = (void *) addr; size_t i; - /* Don't accidentally clober oneself. */ + /* Don't accidentally clobber oneself. */ if (OVERLAP(addr, addr + sizeof(uint32_t), (uintptr_t)_program, (uintptr_t) _eprogram)) return 1; diff --git a/src/lib/smbios.c b/src/lib/smbios.c index deee193be9..3ef3c21bca 100644 --- a/src/lib/smbios.c +++ b/src/lib/smbios.c @@ -216,7 +216,7 @@ static const char *memory_device_type(u8 code) if (code >= MEMORY_TYPE_OTHER && code <= MEMORY_TYPE_HBM3) return type[code - 1]; - return "Unsupproted"; + return "Unsupported"; } static void dump_smbios_type17(struct dimm_info *dimm) @@ -646,7 +646,7 @@ int smbios_write_type9(unsigned long *current, int *handle, t->slot_designation = smbios_add_string(t->eos, name ? name : "SLOT"); t->slot_type = type; - /* TODO add slot_id supoort, will be "_SUN" for ACPI devices */ + /* TODO add slot_id support, will be "_SUN" for ACPI devices */ t->slot_id = id; t->slot_data_bus_width = bandwidth; t->current_usage = usage; |