diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/mainboard/google/dedede/variants/blipper/gpio.c | 27 | ||||
| -rw-r--r-- | src/mainboard/google/dedede/variants/blipper/overridetree.cb | 25 |
2 files changed, 43 insertions, 9 deletions
diff --git a/src/mainboard/google/dedede/variants/blipper/gpio.c b/src/mainboard/google/dedede/variants/blipper/gpio.c index 8c13c76a89..2244557010 100644 --- a/src/mainboard/google/dedede/variants/blipper/gpio.c +++ b/src/mainboard/google/dedede/variants/blipper/gpio.c @@ -7,8 +7,35 @@ /* Pad configuration in ramstage*/ static const struct pad_config gpio_table[] = { + /* C18 : AP_I2C_EMR_SDA */ + PAD_NC(GPP_C18, NONE), + /* C19 : AP_I2C_EMR_SCL */ + PAD_NC(GPP_C19, NONE), + + /* D12 : WCAM_RST_L */ + PAD_NC(GPP_D12, NONE), /* D13 : EN_PP2800_CAMERA */ PAD_CFG_GPO(GPP_D13, 1, PLTRST), + /* D14 : EN_PP1200_CAMERA */ + PAD_NC(GPP_D14, NONE), + /* D15 : UCAM_RST_L */ + PAD_NC(GPP_D15, NONE), + /* D19 : WWAN_WLAN_COEX1 */ + PAD_NC(GPP_D19, NONE), + /* D20 : WWAN_WLAN_COEX2 */ + PAD_NC(GPP_D20, NONE), + /* D21 : WWAN_WLAN_COEX3 */ + PAD_NC(GPP_D21, NONE), + + /* E0 : CLK_24M_UCAM */ + PAD_NC(GPP_E0, NONE), + /* E2 : CLK_24M_WCAM */ + PAD_NC(GPP_E2, NONE), + + /* H6 : AP_I2C_CAM_SDA */ + PAD_NC(GPP_H6, NONE), + /* H7 : AP_I2C_CAM_SCL */ + PAD_NC(GPP_H7, NONE), }; const struct pad_config *variant_override_gpio_table(size_t *num) diff --git a/src/mainboard/google/dedede/variants/blipper/overridetree.cb b/src/mainboard/google/dedede/variants/blipper/overridetree.cb index 48dd2e77ff..7c4c83dff6 100644 --- a/src/mainboard/google/dedede/variants/blipper/overridetree.cb +++ b/src/mainboard/google/dedede/variants/blipper/overridetree.cb @@ -9,9 +9,9 @@ chip soc/intel/jasperlake #| | for TPM communication | #| | before memory is up | #| I2C0 | Trackpad | - #| I2C1 | Digitizer | + #| I2C1 | | #| I2C2 | Touchscreen | - #| I2C3 | Camera | + #| I2C3 | | #| I2C4 | Audio | #+-------------------+---------------------------+ register "common_soc_config" = "{ @@ -24,17 +24,11 @@ chip soc/intel/jasperlake .rise_time_ns = 247, .fall_time_ns = 11, }, - .i2c[1] = { - .speed = I2C_SPEED_FAST, - }, .i2c[2] = { .speed = I2C_SPEED_FAST, .rise_time_ns = 175, .fall_time_ns = 20, }, - .i2c[3] = { - .speed = I2C_SPEED_FAST, - }, .i2c[4] = { .speed = I2C_SPEED_FAST, .rise_time_ns = 99, @@ -43,7 +37,19 @@ chip soc/intel/jasperlake }" # USB Port Configuration + register "usb2_ports[3]" = "USB2_PORT_EMPTY" # Not Used + register "usb2_ports[4]" = "USB2_PORT_EMPTY" # Not Used register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # UF Camera + register "usb2_ports[6]" = "USB2_PORT_EMPTY" # Not Used + + register "SerialIoI2cMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoPci, + [PchSerialIoIndexI2C1] = PchSerialIoDisabled, + [PchSerialIoIndexI2C2] = PchSerialIoPci, + [PchSerialIoIndexI2C3] = PchSerialIoDisabled, + [PchSerialIoIndexI2C4] = PchSerialIoPci, + [PchSerialIoIndexI2C5] = PchSerialIoDisabled, + }" register "power_limits_config" = "{ .tdp_pl1_override = 6, @@ -92,7 +98,6 @@ chip soc/intel/jasperlake chip drivers/usb/acpi register "desc" = ""UFCamera"" register "type" = "UPC_TYPE_INTERNAL" - register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D13)" device usb 2.5 on end end end @@ -117,6 +122,7 @@ chip soc/intel/jasperlake device i2c 0x2c on end end end # I2C 0 + device pci 15.1 off end # I2C 1 device pci 15.2 on chip drivers/i2c/hid register "generic.hid" = ""GTCH7503"" @@ -154,6 +160,7 @@ chip soc/intel/jasperlake device i2c 10 on end end end # I2C 2 + device pci 15.3 off end # I2C 3 device pci 19.0 on chip drivers/i2c/generic register "hid" = ""10EC5682"" |