diff options
Diffstat (limited to 'src')
38 files changed, 0 insertions, 10734 deletions
diff --git a/src/vendorcode/Makefile.inc b/src/vendorcode/Makefile.inc deleted file mode 100644 index de645728a4..0000000000 --- a/src/vendorcode/Makefile.inc +++ /dev/null @@ -1 +0,0 @@ -subdirs-y += amd diff --git a/src/vendorcode/amd/cimx/lib/Makefile.inc b/src/vendorcode/amd/cimx/lib/Makefile.inc deleted file mode 100644 index bd35fecf1f..0000000000 --- a/src/vendorcode/amd/cimx/lib/Makefile.inc +++ /dev/null @@ -1,3 +0,0 @@ - -romstage-y += amdlib32.c -ramstage-y += amdlib32.c diff --git a/src/vendorcode/amd/cimx/lib/amdlib32.c b/src/vendorcode/amd/cimx/lib/amdlib32.c deleted file mode 100644 index ba4532bff2..0000000000 --- a/src/vendorcode/amd/cimx/lib/amdlib32.c +++ /dev/null @@ -1,84 +0,0 @@ -#include "amdlib32.h" - -UINT8 ReadIo8 (IN UINT16 port) -{ - UINT8 value; - __asm__ __volatile__ ("inb %w1, %b0" : "=a"(value) : "Nd" (port)); - return value; -} - -UINT16 ReadIo16 (IN UINT16 port) -{ - UINT16 value; - __asm__ __volatile__ ("inw %w1, %w0" : "=a"(value) : "Nd" (port)); - return value; -} - -UINT32 ReadIo32 (IN UINT16 port) -{ - UINT32 value; - __asm__ __volatile__ ("inl %w1, %0" : "=a"(value) : "Nd" (port)); - return value; -} - -VOID WriteIo8 (IN UINT16 port, IN UINT8 value) -{ - __asm__ __volatile__ ("outb %b0, %w1" : : "a" (value), "Nd" (port)); -} - -VOID WriteIo16 (IN UINT16 port, IN UINT16 value) -{ - __asm__ __volatile__ ("outw %w0, %w1" : : "a" (value), "Nd" (port)); -} - -VOID WriteIo32 (IN UINT16 port, IN UINT32 value) -{ - __asm__ __volatile__ ("outl %0, %w1" : : "a" (value), "Nd" (port)); -} - -UINT64 ReadTSC(VOID) -{ - struct tsc_struct { - unsigned lo; - unsigned hi; - } res; - UINT64 ret; - - __asm__ __volatile__ ( - "rdtsc" - : "=a" (res.lo), "=d"(res.hi) /* outputs */ - ); - ret = res.hi; - ret <<= 32; - ret |= res.lo; - return ret; -} - -VOID CpuidRead(IN UINT32 op, IN OUT SB_CPUID_DATA* Data) -{ - asm volatile( - "cpuid" - : "=a" (Data->EAX_Reg), - "=b" (Data->EBX_Reg), - "=c" (Data->ECX_Reg), - "=d" (Data->EDX_Reg) - : "0" (op)); -} - -static inline unsigned int cpuid_ecx(unsigned int op) -{ - unsigned int eax, ecx; - - __asm__("cpuid" - : "=a" (eax), "=c" (ecx) - : "0" (op) - : "ebx", "edx" ); - return ecx; -} - -//static inline unsigned get_core_num(void) -UINT8 ReadNumberOfCpuCores(VOID) -{ - return (cpuid_ecx(0x80000008) & 0xff); -} - diff --git a/src/vendorcode/amd/cimx/lib/amdlib32.h b/src/vendorcode/amd/cimx/lib/amdlib32.h deleted file mode 100644 index 1d2fdde146..0000000000 --- a/src/vendorcode/amd/cimx/lib/amdlib32.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef _AMDLIB32_H_ -#define _AMDLIB32_H_ - -#include "cbtypes.h" -#include "Amd.h" - -UINT8 ReadIo8 (IN UINT16 port); -UINT16 ReadIo16 (IN UINT16 port); -UINT32 ReadIo32 (IN UINT16 port); -VOID WriteIo8 (IN UINT16 port, IN UINT8 value); -VOID WriteIo16 (IN UINT16 port, IN UINT16 value); -VOID WriteIo32 (IN UINT16 port, IN UINT32 value); -UINT64 ReadTSC(VOID); -VOID CpuidRead(IN UINT32 op, IN OUT SB_CPUID_DATA* Data); -UINT8 ReadNumberOfCpuCores(VOID); -#endif //_AMDLIB32_H_ diff --git a/src/vendorcode/amd/cimx/sb800/ACPILIB.c b/src/vendorcode/amd/cimx/sb800/ACPILIB.c deleted file mode 100644 index 2544726aa8..0000000000 --- a/src/vendorcode/amd/cimx/sb800/ACPILIB.c +++ /dev/null @@ -1,156 +0,0 @@ -/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-#include "SBPLATFORM.h"
-
-//
-//
-// Routine Description:
-//
-// Locate ACPI table
-//
-// Arguments:
-//
-// Signature - table signature
-//
-//Returns:
-//
-// pointer to ACPI table
-//
-//
-VOID*
-ACPI_LocateTable (
- IN UINT32 Signature
- )
-{
- UINT32 i;
- UINT32* RsdPtr;
- UINT32* Rsdt;
- UINTN tableOffset;
- DESCRIPTION_HEADER* CurrentTable;
-
- RsdPtr = (UINT32*) (UINTN)0xe0000;
- Rsdt = NULL;
- do {
- if ( *RsdPtr == Int32FromChar('R', 'S', 'D', ' ') && *(RsdPtr + 1) == Int32FromChar('P', 'T', 'R', ' ')) {
- Rsdt = (UINT32*) (UINTN) ((RSDP*)RsdPtr)->RsdtAddress;
- break;
- }
- RsdPtr += 4;
- } while ( RsdPtr <= (UINT32*) (UINTN)0xffff0 );
- if ( Rsdt != NULL && ACPI_GetTableChecksum (Rsdt) == 0 ) {
- for ( i = 0; i < (((DESCRIPTION_HEADER*)Rsdt)->Length - sizeof (DESCRIPTION_HEADER)) / 4; i++ ) {
- tableOffset = *(UINTN*) ((UINT8*)Rsdt + sizeof (DESCRIPTION_HEADER) + i * 4);
- CurrentTable = (DESCRIPTION_HEADER*)tableOffset;
- if ( CurrentTable->Signature == Signature ) {
- return CurrentTable;
- }
- }
- }
- return NULL;
-}
-
-//
-//
-// Routine Description:
-//
-// Update table checksum
-//
-// Arguments:
-//
-// TablePtr - table pointer
-//
-// Returns:
-//
-// none
-//
-//
-VOID
-ACPI_SetTableChecksum (
- IN VOID* TablePtr
- )
-{
- UINT8 Checksum;
- Checksum = 0;
- ((DESCRIPTION_HEADER*)TablePtr)->Checksum = 0;
- Checksum = ACPI_GetTableChecksum (TablePtr);
- ((DESCRIPTION_HEADER*)TablePtr)->Checksum = (UINT8)(0x100 - Checksum);
-}
-
-//
-//
-// Routine Description:
-//
-// Get table checksum
-//
-// Arguments:
-//
-// TablePtr - table pointer
-//
-// Returns:
-//
-// none
-//
-//
-UINT8
-ACPI_GetTableChecksum (
- IN VOID* TablePtr
- )
-{
- return GetByteSum (TablePtr, ((DESCRIPTION_HEADER*)TablePtr)->Length);
-}
-
-
-UINT8
-GetByteSum (
- IN VOID* pData,
- IN UINT32 Length
- )
-{
- UINT32 i;
- UINT8 Checksum;
- Checksum = 0;
- for ( i = 0; i < Length; i++ ) {
- Checksum = Checksum + (*((UINT8*)pData + i));
- }
- return Checksum;
-}
-VOID
-GetSbAcpiMmioBase (
- OUT UINT32* AcpiMmioBase
- )
-{
- UINT32 Value16;
-
- ReadPMIO (SB_PMIOA_REG24 + 2, AccWidthUint16, &Value16);
- *AcpiMmioBase = Value16 << 16;
-}
-
-VOID
-GetSbAcpiPmBase (
- OUT UINT16* AcpiPmBase
- )
-{
- ReadPMIO (SB_PMIOA_REG60, AccWidthUint16, AcpiPmBase);
-}
-
diff --git a/src/vendorcode/amd/cimx/sb800/ACPILIB.h b/src/vendorcode/amd/cimx/sb800/ACPILIB.h deleted file mode 100644 index 09e2607652..0000000000 --- a/src/vendorcode/amd/cimx/sb800/ACPILIB.h +++ /dev/null @@ -1,60 +0,0 @@ -/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-/**
- * RSDP - ACPI 2.0 table RSDP
- */
-typedef struct _RSDP
-{
- UINT64 Signature; /* RSDP signature "RSD PTR" */
- UINT8 Checksum; /* checksum of the first 20 bytes */
- UINT8 OEMID[6]; /* OEM ID, "LXBIOS" */
- UINT8 Revision; /* 0 for APCI 1.0, 2 for ACPI 2.0 */
- UINT32 RsdtAddress; /* physical address of RSDT */
- UINT32 Length; /* total length of RSDP (including extended part) */
- UINT64 XsdtAddress; /* physical address of XSDT */
- UINT8 ExtendedChecksum; /* chechsum of whole table */
- UINT8 Reserved[3];
-} RSDP;
-
-
-/**
- * DESCRIPTION_HEADER - ACPI common table header
- */
-typedef struct _DESCRIPTION_HEADER
-{
- UINT32 Signature; /* ACPI signature (4 ASCII characters) */
- UINT32 Length; /* Length of table, in bytes, including header */
- UINT8 Revision; /* ACPI Specification minor version # */
- UINT8 Checksum; /* To make sum of entire table == 0 */
- UINT8 OEMID[6]; /* OEM identification */
- UINT8 OEMTableID[8]; /* OEM table identification */
- UINT32 OEMRevision; /* OEM revision number */
- UINT32 CreatorID; /* ASL compiler vendor ID */
- UINT32 CreatorRevision; /* ASL compiler revision number */
-} DESCRIPTION_HEADER;
-
-VOID* ACPI_LocateTable (IN UINT32 Signature);
-VOID ACPI_SetTableChecksum (IN VOID* TablePtr);
-UINT8 ACPI_GetTableChecksum (IN VOID* TablePtr);
-UINT8 GetByteSum (IN VOID* pData, IN UINT32 Length);
diff --git a/src/vendorcode/amd/cimx/sb800/AMDLIB.c b/src/vendorcode/amd/cimx/sb800/AMDLIB.c deleted file mode 100644 index cf3267fb68..0000000000 --- a/src/vendorcode/amd/cimx/sb800/AMDLIB.c +++ /dev/null @@ -1,82 +0,0 @@ -/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-#include "SBPLATFORM.h"
-
-UINT8
-getNumberOfCpuCores (
- OUT VOID
- )
-{
- UINT8 Result;
- Result = 1;
- Result = ReadNumberOfCpuCores ();
- return Result;
-}
-
-UINT32
-readAlink (
- IN UINT32 Index
- )
-{
- UINT32 Data;
- WriteIO (ALINK_ACCESS_INDEX, AccWidthUint32, &Index);
- ReadIO (ALINK_ACCESS_DATA, AccWidthUint32, &Data);
- //Clear Index
- Index = 0;
- WriteIO (ALINK_ACCESS_INDEX, AccWidthUint32, &Index);
- return Data;
-}
-
-VOID
-writeAlink (
- IN UINT32 Index,
- IN UINT32 Data
- )
-{
- WriteIO (ALINK_ACCESS_INDEX, AccWidthUint32 | S3_SAVE, &Index);
- WriteIO (ALINK_ACCESS_DATA, AccWidthUint32 | S3_SAVE, &Data);
- //Clear Index
- Index = 0;
- WriteIO (ALINK_ACCESS_INDEX, AccWidthUint32 | S3_SAVE, &Index);
-}
-
-VOID
-rwAlink (
- IN UINT32 Index,
- IN UINT32 AndMask,
- IN UINT32 OrMask
- )
-{
- UINT32 AccesType;
- AccesType = Index & 0xE0000000;
- if (AccesType == (AXINDC << 29)) {
- writeAlink ((SB_AX_INDXC_REG30 | AccesType), Index & 0x1FFFFFFF);
- Index = (SB_AX_DATAC_REG34 | AccesType);
- } else if (AccesType == (AXINDP << 29)) {
- writeAlink ((SB_AX_INDXP_REG38 | AccesType), Index & 0x1FFFFFFF);
- Index = (SB_AX_DATAP_REG3C | AccesType);
- }
- writeAlink (Index, (readAlink (Index) & AndMask) | OrMask );
-}
-
diff --git a/src/vendorcode/amd/cimx/sb800/AMDSBLIB.c b/src/vendorcode/amd/cimx/sb800/AMDSBLIB.c deleted file mode 100644 index d428ede8b8..0000000000 --- a/src/vendorcode/amd/cimx/sb800/AMDSBLIB.c +++ /dev/null @@ -1,142 +0,0 @@ -/**
- * @file
- *
- * Southbridge IO access common routine
- *
- *
- *
- * @xrefitem bom "File Content Label" "Release Content"
- * @e project: CIMx-SB
- * @e sub-project:
- * @e \$Revision:$ @e \$Date:$
- *
- */
-/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-#include "SBPLATFORM.h"
-
-/*----------------------------------------------------------------------------------------*/
-/**
- * SbStall - Delay routine
- *
- *
- *
- * @param[in] uSec
- *
- */
-VOID
-SbStall (
- IN UINT32 uSec
- )
-{
- UINT16 timerAddr;
- UINT32 startTime;
- UINT32 elapsedTime;
-
- ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG64, AccWidthUint16, &timerAddr);
- if ( timerAddr == 0 ) {
- uSec = uSec / 2;
- while ( uSec != 0 ) {
- ReadIO (0x80, AccWidthUint8, (UINT8 *) (&startTime));
- uSec--;
- }
- } else {
- ReadIO (timerAddr, AccWidthUint32, &startTime);
- for ( ;; ) {
- ReadIO (timerAddr, AccWidthUint32, &elapsedTime);
- if ( elapsedTime < startTime ) {
- elapsedTime = elapsedTime + 0xFFFFFFFF - startTime;
- } else {
- elapsedTime = elapsedTime - startTime;
- }
- if ( (elapsedTime * 28 / 100) > uSec ) {
- break;
- }
- }
- }
-}
-
-/*----------------------------------------------------------------------------------------*/
-/**
- * SbReset - Generate a reset command
- *
- *
- *
- * @param[in] OpFlag - Dummy
- *
- */
-VOID
-SbReset (
- IN UINT8 OpFlag
- )
-{
- UINT8 Temp;
- Temp = OpFlag;
- RWIO (0xcf9, AccWidthUint8, 0x0, 0x06);
-}
-
-/*----------------------------------------------------------------------------------------*/
-/**
- * outPort80 - Send data to PORT 80 (debug port)
- *
- *
- *
- * @param[in] pcode - debug code (32 bits)
- *
- */
-VOID
-outPort80 (
- IN UINT32 pcode
- )
-{
- WriteIO (0x80, AccWidthUint8, &pcode);
- return;
-}
-
-/**
- * AmdSbCopyMem - Memory copy
- *
- * @param[in] pDest - Destance address point
- * @param[in] pSource - Source Address point
- * @param[in] Length - Data length
- *
- */
-VOID
-AmdSbCopyMem (
- IN VOID* pDest,
- IN VOID* pSource,
- IN UINTN Length
- )
-{
- UINTN i;
- UINT8 *Ptr;
- UINT8 *Source;
- Ptr = (UINT8*)pDest;
- Source = (UINT8*)pSource;
- for (i = 0; i < Length; i++) {
- *Ptr = *Source;
- Source++;
- Ptr++;
- }
-}
diff --git a/src/vendorcode/amd/cimx/sb800/AMDSBLIB.h b/src/vendorcode/amd/cimx/sb800/AMDSBLIB.h deleted file mode 100644 index 15a6fbf83e..0000000000 --- a/src/vendorcode/amd/cimx/sb800/AMDSBLIB.h +++ /dev/null @@ -1,97 +0,0 @@ -/**
- * @file
- *
- * Southbridge IO access common routine define file
- *
- *
- *
- * @xrefitem bom "File Content Label" "Release Content"
- * @e project: CIMx-SB
- * @e sub-project:
- * @e \$Revision:$ @e \$Date:$
- *
- */
-/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-
-//AMDSBLIB Routines
-
-/**
- * SbStall - Delay routine
- *
- *
- *
- * @param[in] uSec
- *
- */
-VOID SbStall (IN UINT32 uSec);
-
-/**
- * SbReset - Generate a reset command
- *
- *
- *
- * @param[in] OpFlag - Dummy
- *
- */
-VOID SbReset (IN UINT8 OpFlag);
-
-/**
- * outPort80 - Send data to PORT 80 (debug port)
- *
- *
- *
- * @param[in] pcode - debug code (32 bits)
- *
- */
-VOID outPort80 (IN UINT32 pcode);
-
-/**
- * getEfuseStatue - Get Efuse status
- *
- *
- * @param[in] Value - Return Chip strap status
- *
- */
-VOID getEfuseStatus (IN VOID* Value);
-
-/**
- * AmdSbDispatcher - Dispatch Southbridge function
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-AGESA_STATUS AmdSbDispatcher (IN VOID *pConfig);
-
-/**
- * AmdSbCopyMem - Memory copy
- *
- * @param[in] pDest - Destance address point
- * @param[in] pSource - Source Address point
- * @param[in] Length - Data length
- *
- */
-VOID AmdSbCopyMem (IN VOID* pDest, IN VOID* pSource, IN UINTN Length);
diff --git a/src/vendorcode/amd/cimx/sb800/AZALIA.c b/src/vendorcode/amd/cimx/sb800/AZALIA.c deleted file mode 100644 index 8c1f73513e..0000000000 --- a/src/vendorcode/amd/cimx/sb800/AZALIA.c +++ /dev/null @@ -1,502 +0,0 @@ -/**
- * @file
- *
- * Config Southbridge HD Audio Controller
- *
- *
- *
- * @xrefitem bom "File Content Label" "Release Content"
- * @e project: CIMx-SB
- * @e sub-project:
- * @e \$Revision:$ @e \$Date:$
- *
- */
-
-/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-
-#include "SBPLATFORM.h"
-
-//
-// Declaration of local functions
-//
-
-VOID configureAzaliaPinCmd (IN AMDSBCFG* pConfig, IN UINT32 ddBAR0, IN UINT8 dbChannelNum);
-VOID configureAzaliaSetConfigD4Dword (IN CODECENTRY* tempAzaliaCodecEntryPtr, IN UINT32 ddChannelNum, IN UINT32 ddBAR0);
-
-/**
- * Pin Config for ALC880, ALC882 and ALC883.
- *
- *
- *
- */
-const static CODECENTRY AzaliaCodecAlc882Table[] =
-{
- {0x14, 0x01014010},
- {0x15, 0x01011012},
- {0x16, 0x01016011},
- {0x17, 0x01012014},
- {0x18, 0x01A19030},
- {0x19, 0x411111F0},
- {0x1a, 0x01813080},
- {0x1b, 0x411111F0},
- {0x1C, 0x411111F0},
- {0x1d, 0x411111F0},
- {0x1e, 0x01441150},
- {0x1f, 0x01C46160},
- {0xff, 0xffffffff}
-};
-
-/**
- * Pin Config for ALC0262.
- *
- *
- *
- */
-const static CODECENTRY AzaliaCodecAlc262Table[] =
-{
- {0x14, 0x01014010},
- {0x15, 0x411111F0},
- {0x16, 0x411111F0},
- {0x18, 0x01A19830},
- {0x19, 0x02A19C40},
- {0x1a, 0x01813031},
- {0x1b, 0x02014C20},
- {0x1c, 0x411111F0},
- {0x1d, 0x411111F0},
- {0x1e, 0x0144111E},
- {0x1f, 0x01C46150},
- {0xff, 0xffffffff}
-};
-
-/**
- * Pin Config for ALC0269.
- *
- *
- *
- */
-const static CODECENTRY AzaliaCodecAlc269Table[] =
-{
- {0x12, 0x99A30960},
- {0x14, 0x99130110},
- {0x15, 0x0221401F},
- {0x16, 0x99130120},
- {0x18, 0x01A19850},
- {0x19, 0x02A15951},
- {0x1a, 0x01813052},
- {0x1b, 0x0181405F},
- {0x1d, 0x40134601},
- {0x1e, 0x01441130},
- {0x11, 0x18567140},
- {0x20, 0x0030FFFF},
- {0xff, 0xffffffff}
-};
-
-/**
- * Pin Config for ALC0861.
- *
- *
- *
- */
-const static CODECENTRY AzaliaCodecAlc861Table[] =
-{
- {0x01, 0x8086C601},
- {0x0B, 0x01014110},
- {0x0C, 0x01813140},
- {0x0D, 0x01A19941},
- {0x0E, 0x411111F0},
- {0x0F, 0x02214420},
- {0x10, 0x02A1994E},
- {0x11, 0x99330142},
- {0x12, 0x01451130},
- {0x1F, 0x411111F0},
- {0x20, 0x411111F0},
- {0x23, 0x411111F0},
- {0xff, 0xffffffff}
-};
-
-/**
- * Pin Config for ALC0889.
- *
- *
- *
- */
-const static CODECENTRY AzaliaCodecAlc889Table[] =
-{
- {0x11, 0x411111F0},
- {0x14, 0x01014010},
- {0x15, 0x01011012},
- {0x16, 0x01016011},
- {0x17, 0x01013014},
- {0x18, 0x01A19030},
- {0x19, 0x411111F0},
- {0x1a, 0x411111F0},
- {0x1b, 0x411111F0},
- {0x1C, 0x411111F0},
- {0x1d, 0x411111F0},
- {0x1e, 0x01442150},
- {0x1f, 0x01C42160},
- {0xff, 0xffffffff}
-};
-
-/**
- * Pin Config for ADI1984.
- *
- *
- *
- */
-const static CODECENTRY AzaliaCodecAd1984Table[] =
-{
- {0x11, 0x0221401F},
- {0x12, 0x90170110},
- {0x13, 0x511301F0},
- {0x14, 0x02A15020},
- {0x15, 0x50A301F0},
- {0x16, 0x593301F0},
- {0x17, 0x55A601F0},
- {0x18, 0x55A601F0},
- {0x1A, 0x91F311F0},
- {0x1B, 0x014511A0},
- {0x1C, 0x599301F0},
- {0xff, 0xffffffff}
-};
-
-/**
- * FrontPanel Config table list
- *
- *
- *
- */
-const static CODECENTRY FrontPanelAzaliaCodecTableList[] =
-{
- {0x19, 0x02A19040},
- {0x1b, 0x02214020},
- {0xff, 0xffffffff}
-};
-
-/**
- * Current HD Audio support codec list
- *
- *
- *
- */
-const static CODECTBLLIST azaliaCodecTableList[] =
-{
- {0x010ec0880, (CODECENTRY*)&AzaliaCodecAlc882Table[0]},
- {0x010ec0882, (CODECENTRY*)&AzaliaCodecAlc882Table[0]},
- {0x010ec0883, (CODECENTRY*)&AzaliaCodecAlc882Table[0]},
- {0x010ec0885, (CODECENTRY*)&AzaliaCodecAlc882Table[0]},
- {0x010ec0889, (CODECENTRY*)&AzaliaCodecAlc889Table[0]},
- {0x010ec0262, (CODECENTRY*)&AzaliaCodecAlc262Table[0]},
- {0x010ec0269, (CODECENTRY*)&AzaliaCodecAlc269Table[0]},
- {0x010ec0861, (CODECENTRY*)&AzaliaCodecAlc861Table[0]},
- {0x011d41984, (CODECENTRY*)&AzaliaCodecAd1984Table[0]},
- { (UINT32) 0x0FFFFFFFF, (CODECENTRY*) (UINTN)0x0FFFFFFFF}
-};
-
-/**
- * azaliaInitBeforePciEnum - Config HD Audio Before PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-azaliaInitBeforePciEnum (
- IN AMDSBCFG* pConfig
- )
-{
- if ( pConfig->AzaliaController == 1 ) {
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEB, AccWidthUint8, ~BIT0, 0);
- } else {
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEB, AccWidthUint8, ~BIT0, BIT0);
- if ( pConfig->BuildParameters.HdAudioMsi) {
- RWPCI ((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG44, AccWidthUint32 | S3_SAVE, ~BIT8, BIT8);
- RWPCI ((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG60, AccWidthUint32 | S3_SAVE, ~BIT16, BIT16);
- }
- }
-}
-
-/**
- * azaliaInitAfterPciEnum - Config HD Audio after PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-azaliaInitAfterPciEnum (
- IN AMDSBCFG* pConfig
- )
-{
- UINT8 Data;
- UINT8 i;
- UINT8 dbEnableAzalia;
- UINT8 dbPinRouting;
- UINT8 dbChannelNum;
- UINT8 dbTempVariable;
- UINT16 dwTempVariable;
- UINT32 ddBAR0;
- UINT32 ddTempVariable;
- dbEnableAzalia = 0;
- dbChannelNum = 0;
- dbTempVariable = 0;
- dwTempVariable = 0;
- ddBAR0 = 0;
- ddTempVariable = 0;
-
- if ( pConfig->AzaliaController == 1 ) {
- return;
- }
-
- if ( pConfig->AzaliaController != 1 ) {
- RWPCI ((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG04, AccWidthUint8 | S3_SAVE, ~BIT1, BIT1);
- if ( pConfig->BuildParameters.AzaliaSsid != NULL ) {
- RWPCI ((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pConfig->BuildParameters.AzaliaSsid);
- }
- ReadPCI ((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG10, AccWidthUint32, &ddBAR0);
- if ( ddBAR0 != 0 ) {
- if ( ddBAR0 != 0xFFFFFFFF ) {
- ddBAR0 &= ~(0x03FFF);
- dbEnableAzalia = 1;
- }
- }
- }
-
- if ( dbEnableAzalia ) {
- // Get SDIN Configuration
- if ( pConfig->AZALIACONFIG.AzaliaConfig.AzaliaSdin0 == 2 ) {
- RWMEM (ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG167, AccWidthUint8, 0, 0x3E);
- RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG167, AccWidthUint8, 0, 0x00);
- } else {
- RWMEM (ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG167, AccWidthUint8, 0, 0x0);
- RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG167, AccWidthUint8, 0, 0x01);
- }
- if ( pConfig->AZALIACONFIG.AzaliaConfig.AzaliaSdin1 == 2 ) {
- RWMEM (ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG168, AccWidthUint8, 0, 0x3E);
- RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG168, AccWidthUint8, 0, 0x00);
- } else {
- RWMEM (ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG168, AccWidthUint8, 0, 0x0);
- RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG168, AccWidthUint8, 0, 0x01);
- }
- if ( pConfig->AZALIACONFIG.AzaliaConfig.AzaliaSdin2 == 2 ) {
- RWMEM (ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG169, AccWidthUint8, 0, 0x3E);
- RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG169, AccWidthUint8, 0, 0x00);
- } else {
- RWMEM (ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG169, AccWidthUint8, 0, 0x0);
- RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG169, AccWidthUint8, 0, 0x01);
- }
- if ( pConfig->AZALIACONFIG.AzaliaConfig.AzaliaSdin3 == 2 ) {
- RWMEM (ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG170, AccWidthUint8, 0, 0x3E);
- RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG170, AccWidthUint8, 0, 0x00);
- } else {
- RWMEM (ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG170, AccWidthUint8, 0, 0x0);
- RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG170, AccWidthUint8, 0, 0x01);
- }
- // INT#A Azalia resource
- Data = 0x93; // Azalia APIC index
- WriteIO (SB_IOMAP_REGC00, AccWidthUint8, &Data);
- Data = 0x10; // IRQ16 (INTA#)
- WriteIO (SB_IOMAP_REGC01, AccWidthUint8, &Data);
-
- i = 11;
- do {
- ReadMEM ( ddBAR0 + SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable);
- dbTempVariable |= BIT0;
- WriteMEM (ddBAR0 + SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable);
- SbStall (1000);
- ReadMEM (ddBAR0 + SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable);
- i--;
- } while ((! (dbTempVariable & BIT0)) && (i > 0) );
-
- if ( i == 0 ) {
- return;
- }
-
- SbStall (1000);
- ReadMEM ( ddBAR0 + SB_AZ_BAR_REG0E, AccWidthUint16, &dwTempVariable);
- if ( dwTempVariable & 0x0F ) {
-
- //atleast one azalia codec found
- // ?? E0 is not real register what we expect. we have change to GPIO/and program GPIO Mux
- //ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGE0, AccWidthUint8, &dbPinRouting);
- dbPinRouting = pConfig->AZALIACONFIG.AzaliaSdinPin;
- do {
- if ( ( ! (dbPinRouting & BIT0) ) && (dbPinRouting & BIT1) ) {
-// dbChannelNum = 3;
- configureAzaliaPinCmd (pConfig, ddBAR0, dbChannelNum);
- }
- dbPinRouting >>= 2;
- dbChannelNum++;
- } while ( dbChannelNum != 4 );
- } else {
- //No Azalia codec found
- if ( pConfig->AzaliaController != 2 ) {
- dbEnableAzalia = 0; //set flag to disable Azalia
- }
- }
- }
-
- if ( dbEnableAzalia ) {
- //redo clear reset
- do {
- dwTempVariable = 0;
- WriteMEM ( ddBAR0 + SB_AZ_BAR_REG0C, AccWidthUint16 | S3_SAVE, &dwTempVariable);
- ReadMEM (ddBAR0 + SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable);
- dbTempVariable &= ~(BIT0);
- WriteMEM (ddBAR0 + SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable);
- ReadMEM (ddBAR0 + SB_AZ_BAR_REG08, AccWidthUint8 | S3_SAVE, &dbTempVariable);
- } while ( dbTempVariable & BIT0 );
-
- if ( pConfig->AzaliaSnoop == 1 ) {
- RWPCI ((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG42, AccWidthUint8 | S3_SAVE, 0xFF, BIT1 + BIT0);
- }
- } else {
- //disable Azalia controller
- RWPCI ((AZALIA_BUS_DEV_FUN << 16) + SB_AZ_REG04, AccWidthUint16 | S3_SAVE, 0, 0);
- // RWPMIO (SB_PMIO_REG59, AccWidthUint8 | S3_SAVE, ~BIT3, 0);
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEB, AccWidthUint8, ~BIT0, 0);
- // RWPCI ((SMBUS_BUS_DEV_FUN << 16) + SB_SMBUS_REGFC, AccWidthUint8 | S3_SAVE, 0, 0x55);
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEB, AccWidthUint8, ~BIT0, 0);
- }
-}
-
-/**
- * configureAzaliaPinCmd - Configuration HD Audio PIN Command
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- * @param[in] ddBAR0 HD Audio BAR0 base address.
- * @param[in] dbChannelNum Channel Number.
- *
- */
-VOID
-configureAzaliaPinCmd (
- IN AMDSBCFG* pConfig,
- IN UINT32 ddBAR0,
- IN UINT8 dbChannelNum
- )
-{
- UINT32 ddTempVariable;
- UINT32 ddChannelNum;
- CODECTBLLIST* ptempAzaliaOemCodecTablePtr;
- CODECENTRY* tempAzaliaCodecEntryPtr;
-
- if ( (pConfig->AzaliaPinCfg) != 1 ) {
- return;
- }
-
- ddChannelNum = dbChannelNum << 28;
- ddTempVariable = 0xF0000;
- ddTempVariable |= ddChannelNum;
-
- WriteMEM (ddBAR0 + SB_AZ_BAR_REG60, AccWidthUint32 | S3_SAVE, &ddTempVariable);
- SbStall (600);
- ReadMEM (ddBAR0 + SB_AZ_BAR_REG64, AccWidthUint32 | S3_SAVE, &ddTempVariable);
-
- if ( ((pConfig->AZOEMTBL.pAzaliaOemCodecTablePtr) == NULL) || ((pConfig->AZOEMTBL.pAzaliaOemCodecTablePtr) == ((CODECTBLLIST*) (UINTN)0xFFFFFFFF))) {
- ptempAzaliaOemCodecTablePtr = (CODECTBLLIST*) FIXUP_PTR (&azaliaCodecTableList[0]);
- } else {
- ptempAzaliaOemCodecTablePtr = (CODECTBLLIST*) pConfig->AZOEMTBL.pAzaliaOemCodecTablePtr;
- }
-
- while ( ptempAzaliaOemCodecTablePtr->CodecID != 0xFFFFFFFF ) {
- if ( ptempAzaliaOemCodecTablePtr->CodecID == ddTempVariable ) {
- break;
- } else {
- ++ptempAzaliaOemCodecTablePtr;
- }
- }
-
- if ( ptempAzaliaOemCodecTablePtr->CodecID != 0xFFFFFFFF ) {
- tempAzaliaCodecEntryPtr = (CODECENTRY*) ptempAzaliaOemCodecTablePtr->CodecTablePtr;
-
- if ( ((pConfig->AZOEMTBL.pAzaliaOemCodecTablePtr) == NULL) || ((pConfig->AZOEMTBL.pAzaliaOemCodecTablePtr) == ((CODECTBLLIST*) (UINTN)0xFFFFFFFF)) ) {
- tempAzaliaCodecEntryPtr = (CODECENTRY*) FIXUP_PTR (tempAzaliaCodecEntryPtr);
- }
- configureAzaliaSetConfigD4Dword (tempAzaliaCodecEntryPtr, ddChannelNum, ddBAR0);
- if ( pConfig->AzaliaFrontPanel != 1 ) {
- if ( (pConfig->AzaliaFrontPanel == 2) || (pConfig->FrontPanelDetected == 1) ) {
- if ( ((pConfig->AZOEMFPTBL.pAzaliaOemFpCodecTablePtr) == NULL) || ((pConfig->AZOEMFPTBL.pAzaliaOemFpCodecTablePtr) == (VOID*) (UINTN)0xFFFFFFFF) ) {
- tempAzaliaCodecEntryPtr = (CODECENTRY*) FIXUP_PTR (&FrontPanelAzaliaCodecTableList[0]);
- } else {
- tempAzaliaCodecEntryPtr = (CODECENTRY*) pConfig->AZOEMFPTBL.pAzaliaOemFpCodecTablePtr;
- }
- configureAzaliaSetConfigD4Dword (tempAzaliaCodecEntryPtr, ddChannelNum, ddBAR0);
- }
- }
- }
-}
-
-/**
- * configureAzaliaSetConfigD4Dword - Configuration HD Audio Codec table
- *
- *
- * @param[in] tempAzaliaCodecEntryPtr HD Audio Codec table structure pointer.
- * @param[in] ddChannelNum HD Audio Channel Number.
- * @param[in] ddBAR0 HD Audio BAR0 base address.
- *
- */
-VOID
-configureAzaliaSetConfigD4Dword (
- IN CODECENTRY* tempAzaliaCodecEntryPtr,
- IN UINT32 ddChannelNum,
- IN UINT32 ddBAR0
- )
-{
- UINT8 dbtemp1;
- UINT8 dbtemp2;
- UINT8 i;
- UINT32 ddtemp;
- UINT32 ddtemp2;
- ddtemp = 0;
- ddtemp2 = 0;
- while ( (tempAzaliaCodecEntryPtr->Nid) != 0xFF ) {
- dbtemp1 = 0x20;
- if ( (tempAzaliaCodecEntryPtr->Nid) == 0x1 ) {
- dbtemp1 = 0x24;
- }
-
- ddtemp = tempAzaliaCodecEntryPtr->Nid;
- ddtemp &= 0xff;
- ddtemp <<= 20;
- ddtemp |= ddChannelNum;
-
- ddtemp |= (0x700 << 8);
- for ( i = 4; i > 0; i-- ) {
- do {
- ReadMEM (ddBAR0 + SB_AZ_BAR_REG68, AccWidthUint32, &ddtemp2);
- } while ( ddtemp2 & BIT0 );
-
- dbtemp2 = (UINT8) (( (tempAzaliaCodecEntryPtr->Byte40) >> ((4 - i) * 8 ) ) & 0xff);
- ddtemp = (ddtemp & 0xFFFF0000) + ((dbtemp1 - i) << 8) + dbtemp2;
- WriteMEM (ddBAR0 + SB_AZ_BAR_REG60, AccWidthUint32 | S3_SAVE, &ddtemp);
- SbStall (60);
- }
- ++tempAzaliaCodecEntryPtr;
- }
-}
-
diff --git a/src/vendorcode/amd/cimx/sb800/DISPATCHER.c b/src/vendorcode/amd/cimx/sb800/DISPATCHER.c deleted file mode 100644 index 61c57cafa0..0000000000 --- a/src/vendorcode/amd/cimx/sb800/DISPATCHER.c +++ /dev/null @@ -1,246 +0,0 @@ -/**
- * @file
- *
- * Function dispatcher.
- *
- *
- *
- * @xrefitem bom "File Content Label" "Release Content"
- * @e project: CIMx-SB
- * @e sub-project:
- * @e \$Revision:$ @e \$Date:$
- *
- */
-
-/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-/*----------------------------------------------------------------------------------------
- * M O D U L E S U S E D
- *----------------------------------------------------------------------------------------
- */
-
-#include "SBPLATFORM.h"
-
-/*----------------------------------------------------------------------------------------
- * P R O T O T Y P E S O F L O C A L F U N C T I O N S
- *----------------------------------------------------------------------------------------
-*/
-
-
-//
-// Declaration of local functions
-//
-
-VOID saveConfigPointer (IN AMDSBCFG* pConfig);
-VOID* VerifyImage (IN UINT64 Signature, IN VOID* ImagePtr);
-VOID* LocateImage (IN UINT64 Signature);
-
-/*----------------------------------------------------------------------------------------
- * T Y P E D E F S A N D S T R U C T U R E S
- *----------------------------------------------------------------------------------------
- */
-
-/*----------------------------------------------------------------------------------------
- * E X P O R T E D F U N C T I O N S
- *----------------------------------------------------------------------------------------
- */
-
-/**
- * AmdSbDispatcher - Dispatch Southbridge function
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-AGESA_STATUS
-AmdSbDispatcher (
- IN VOID *pConfig
- )
-{
- AGESA_STATUS Status;
-
-#ifdef B1_IMAGE
- VOID *pAltImagePtr;
- CIM_IMAGE_ENTRY AltImageEntry;
-#endif
-
- UINT64 tdValue;
- tdValue = 0x32314130384253ULL;
-
-#ifdef B1_IMAGE
- pAltImagePtr = NULL;
-#endif
- Status = AGESA_UNSUPPORTED;
-
-#ifdef B1_IMAGE
- if ((UINT32) (UINTN) (((AMD_CONFIG_PARAMS*)pConfig)->AltImageBasePtr) != 0xffffffff ) {
- if ( ((AMD_CONFIG_PARAMS*)pConfig)->AltImageBasePtr ) {
- pAltImagePtr = VerifyImage ( tdValue, (VOID*) (UINTN) ((AMD_CONFIG_PARAMS*)pConfig)->AltImageBasePtr);
- }
- if ( pAltImagePtr == NULL ) {
- pAltImagePtr = LocateImage ( tdValue );
- }
- if ( pAltImagePtr != NULL ) {
- ((AMD_CONFIG_PARAMS*)pConfig)->ImageBasePtr = (UINT32) (UINTN) pAltImagePtr;
- AltImageEntry = (CIM_IMAGE_ENTRY) (UINTN) ((UINT32) (UINTN) pAltImagePtr + (UINT32) (((AMD_IMAGE_HEADER*) (UINTN) pAltImagePtr)->EntryPointAddress));
- (*AltImageEntry) (pConfig);
- return Status;
- }
- }
-#endif
- saveConfigPointer (pConfig);
-
- if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_POWERON_INIT ) {
- sbPowerOnInit ((AMDSBCFG*) pConfig);
- }
-
-#ifndef B1_IMAGE
- if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_BEFORE_PCI_INIT ) {
- sbBeforePciInit ((AMDSBCFG*)pConfig);
- }
-
- if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_AFTER_PCI_INIT ) {
- sbAfterPciInit ((AMDSBCFG*)pConfig);
- }
-
- if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_MID_POST_INIT ) {
- sbMidPostInit ((AMDSBCFG*)pConfig);
- }
-
- if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_LATE_POST_INIT ) {
- sbLatePost ((AMDSBCFG*)pConfig);
- }
-
- if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_BEFORE_PCI_RESTORE_INIT ) {
- sbBeforePciRestoreInit ((AMDSBCFG*)pConfig);
- }
-
- if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_AFTER_PCI_RESTORE_INIT ) {
- sbAfterPciRestoreInit ((AMDSBCFG*)pConfig);
- }
-
- if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_SMM_SERVICE ) {
- sbSmmService ((AMDSBCFG*)pConfig);
- }
-
- if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_SMM_ACPION ) {
- sbSmmAcpiOn ((AMDSBCFG*)pConfig);
- }
-
- if ( ((AMD_CONFIG_PARAMS*)pConfig)->Func == SB_EC_FANCONTROL ) {
- sbECfancontrolservice((AMDSBCFG*)pConfig);;
- }
-#endif
- return Status;
-}
-
-/**
- * LocateImage - Locate Southbridge CIMx module
- *
- *
- *
- * @param[in] Signature Southbridge CIMx image signature.
- *
- */
-VOID*
-LocateImage (
- IN UINT64 Signature
- )
-{
- VOID *Result;
- UINT32 ImagePtr;
- ImagePtr = 0xffffffff - (IMAGE_ALIGN - 1);
-
- while ( ImagePtr >= (0xfffffff - (NUM_IMAGE_LOCATION * IMAGE_ALIGN - 1)) ) {
-#ifdef x64
- 12346789
-#else
- Result = VerifyImage (Signature, (VOID*) ImagePtr);
-#endif
- if ( Result != NULL ) {
- return Result;
- }
- ImagePtr -= IMAGE_ALIGN;
- }
- return NULL;
-}
-
-/**
- * VerifyImage - Verify Southbridge CIMx module
- *
- *
- * @param[in] Signature Southbridge CIMx image signature.
- * @param[in] ImagePtr Southbridge CIMx image address.
- *
- */
-VOID*
-VerifyImage (
- IN UINT64 Signature,
- IN VOID* ImagePtr
- )
-{
- UINT16 *TempImagePtr;
- UINT16 Sum;
- UINT32 i;
- Sum = 0;
- if ( (*((UINT32*)ImagePtr) == Int32FromChar('$', 'A', 'M', 'D') && ((CIMFILEHEADER*)ImagePtr)->CreatorID == Signature) ) {
- //GetImage Image size
- TempImagePtr = (UINT16*)ImagePtr;
- for ( i = 0; i < (((CIMFILEHEADER*)ImagePtr)->ImageSize); i += 2 ) {
- Sum = Sum + *TempImagePtr;
- TempImagePtr++;
- }
- if ( Sum == 0 ) {
- return ImagePtr;
- }
- }
- return NULL;
-}
-
-/**
- * saveConfigPointer - Verify Southbridge CIMx module
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-saveConfigPointer (
- IN AMDSBCFG* pConfig
- )
-{
- UINT8 dbReg;
- UINT8 i;
- UINT32 ddValue;
-
- ddValue = (UINT32) (UINTN)pConfig;
- dbReg = SB_ECMOS_REG08;
-
- for ( i = 0; i <= 3; i++ ) {
- WriteIO (SB_IOMAP_REG72, AccWidthUint8, &dbReg);
- WriteIO (SB_IOMAP_REG73, AccWidthUint8, (UINT8*)&ddValue);
- ddValue = (ddValue >> 8);
- dbReg++;
- }
-}
diff --git a/src/vendorcode/amd/cimx/sb800/EC.c b/src/vendorcode/amd/cimx/sb800/EC.c deleted file mode 100644 index 32474e45b7..0000000000 --- a/src/vendorcode/amd/cimx/sb800/EC.c +++ /dev/null @@ -1,121 +0,0 @@ -
-/**
- * @file
- *
- * Config Southbridge EC Controller
- *
- * Init EC features.
- *
- * @xrefitem bom "File Content Label" "Release Content"
- * @e project: CIMx-SB
- * @e sub-project:
- * @e \$Revision:$ @e \$Date:$
- *
- */
-/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-#include "SBPLATFORM.h"
-
-#ifndef NO_EC_SUPPORT
-
-/**
- * Config EC controller during power-on
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-ecPowerOnInit (
- IN AMDSBCFG* pConfig
- )
-{
- //Enable config mode
- EnterEcConfig ();
-
- //Do settings for mailbox - logical device 0x09
- RWEC8 (0x07, 0x00, 0x09); //switch to device 9 (Mailbox)
- RWEC8 (0x60, 0x00, (MailBoxPort >> 8)); //set MSB of Mailbox port
- RWEC8 (0x61, 0x00, (MailBoxPort & 0xFF)); //set LSB of Mailbox port
- RWEC8 (0x30, 0x00, 0x01); //;Enable Mailbox Registers Interface, bit0=1
-
- if ( pConfig->BuildParameters.EcKbd == ENABLED) {
- //Enable KBRST#, IRQ1 & IRQ12, GateA20 Function signal from IMC
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGD6, AccWidthUint8, ~BIT8, BIT0 + BIT1 + BIT2 + BIT3);
-
- //Disable LPC Decoding of port 60/64
- RWPCI (((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG47), AccWidthUint8 | S3_SAVE, ~BIT5, 0);
-
- //Enable logical device 0x07 (Keyboard controller)
- RWEC8 (0x07, 0x00, 0x07);
- RWEC8 (0x30, 0x00, 0x01);
- }
-
- if ( pConfig->BuildParameters.EcChannel0 == ENABLED) {
- //Logical device 0x03
- RWEC8 (0x07, 0x00, 0x03);
- RWEC8 (0x60, 0x00, 0x00);
- RWEC8 (0x61, 0x00, 0x62);
- RWEC8 (0x30, 0x00, 0x01); //;Enable Device 8
- }
-
- //Enable EC (IMC) to generate SMI to BIOS
- RWMEM (ACPI_MMIO_BASE + SMI_BASE + SB_SMI_REGB3, AccWidthUint8, ~BIT6, BIT6);
- ExitEcConfig ();
-}
-
-/**
- * Config EC controller before PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-ecInitBeforePciEnum (
- IN AMDSBCFG* pConfig
- )
-{
- AMDSBCFG* pTmp; // dummy code
- pTmp = pConfig;
-}
-
-/**
- * Prepare EC controller to boot to OS.
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-ecInitLatePost (
- IN AMDSBCFG* pConfig
- )
-{
- AMDSBCFG* pTmp; // dummy code
- pTmp = pConfig;
-}
-#endif
diff --git a/src/vendorcode/amd/cimx/sb800/ECLIB.c b/src/vendorcode/amd/cimx/sb800/ECLIB.c deleted file mode 100644 index e8ee956810..0000000000 --- a/src/vendorcode/amd/cimx/sb800/ECLIB.c +++ /dev/null @@ -1,146 +0,0 @@ -/**
- * @file
- *
- * Southbridge EC IO access common routine
- *
- */
-/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-#include "SBPLATFORM.h"
-
-// #ifndef NO_EC_SUPPORT
-
-/*----------------------------------------------------------------------------------------*/
-/**
- * EnterEcConfig - Force EC into Config mode
- *
- *
- *
- *
- */
-VOID
-EnterEcConfig (
- )
-{
- UINT16 dwEcIndexPort;
-
- ReadPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4, AccWidthUint16 | S3_SAVE, &dwEcIndexPort);
- dwEcIndexPort &= ~(BIT0);
- RWIO (dwEcIndexPort, AccWidthUint8, 0x00, 0x5A);
-}
-
-/*----------------------------------------------------------------------------------------*/
-/**
- * ExitEcConfig - Force EC exit Config mode
- *
- *
- *
- *
- */
-VOID
-ExitEcConfig (
- )
-{
- UINT16 dwEcIndexPort;
-
- ReadPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4, AccWidthUint16 | S3_SAVE, &dwEcIndexPort);
- dwEcIndexPort &= ~(BIT0);
- RWIO (dwEcIndexPort, AccWidthUint8, 0x00, 0xA5);
-}
-
-/*----------------------------------------------------------------------------------------*/
-/**
- * ReadEC8 - Read EC register data
- *
- *
- *
- * @param[in] Address - EC Register Offset Value
- * @param[in] Value - Read Data Buffer
- *
- */
-VOID
-ReadEC8 (
- IN UINT8 Address,
- IN UINT8* Value
- )
-{
- UINT16 dwEcIndexPort;
-
- ReadPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4, AccWidthUint16 | S3_SAVE, &dwEcIndexPort);
- dwEcIndexPort &= ~(BIT0);
- WriteIO (dwEcIndexPort, AccWidthUint8, &Address);
- ReadIO (dwEcIndexPort + 1, AccWidthUint8, Value);
-}
-
-/*----------------------------------------------------------------------------------------*/
-/**
- * WriteEC8 - Write date into EC register
- *
- *
- *
- * @param[in] Address - EC Register Offset Value
- * @param[in] Value - Write Data Buffer
- *
- */
-VOID
-WriteEC8 (
- IN UINT8 Address,
- IN UINT8* Value
- )
-{
- UINT16 dwEcIndexPort;
-
- ReadPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4, AccWidthUint16 | S3_SAVE, &dwEcIndexPort);
- dwEcIndexPort &= ~(BIT0);
-
- WriteIO (dwEcIndexPort, AccWidthUint8, &Address);
- WriteIO (dwEcIndexPort + 1, AccWidthUint8, Value);
-}
-
-/*----------------------------------------------------------------------------------------*/
-/**
- * RWEC8 - Read/Write EC register
- *
- *
- *
- * @param[in] Address - EC Register Offset Value
- * @param[in] AndMask - Data And Mask 8 bits
- * @param[in] OrMask - Data OR Mask 8 bits
- *
- */
-VOID
-RWEC8 (
- IN UINT8 Address,
- IN UINT8 AndMask,
- IN UINT8 OrMask
- )
-{
- UINT8 Result;
- ReadEC8 (Address, &Result);
- Result = (Result & AndMask) | OrMask;
- WriteEC8 (Address, &Result);
-}
-
-// #endif
-
diff --git a/src/vendorcode/amd/cimx/sb800/ECfan.h b/src/vendorcode/amd/cimx/sb800/ECfan.h deleted file mode 100644 index fcca6e5659..0000000000 --- a/src/vendorcode/amd/cimx/sb800/ECfan.h +++ /dev/null @@ -1,60 +0,0 @@ -/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-
-VOID WriteECmsg (IN UINT8 Address, IN UINT8 OpFlag, IN VOID* Value);
-VOID WaitForEcLDN9MailboxCmdAck (VOID);
-VOID ReadECmsg (IN UINT8 Address, IN UINT8 OpFlag, OUT VOID* Value);
-
-// IMC Message Register Software Interface
-#define CPU_MISC_BUS_DEV_FUN ((0x18 << 3) + 3)
-
-#define MSG_SYS_TO_IMC 0x80
-#define Fun_80 0x80
-#define Fun_81 0x81
-#define Fun_82 0x82
-#define Fun_83 0x83
-#define Fun_84 0x84
-#define Fun_85 0x85
-#define Fun_86 0x86
-#define Fun_87 0x87
-#define Fun_88 0x88
-#define Fun_89 0x89
-#define Fun_90 0x90
-#define MSG_IMC_TO_SYS 0x81
-#define MSG_REG0 0x82
-#define MSG_REG1 0x83
-#define MSG_REG2 0x84
-#define MSG_REG3 0x85
-#define MSG_REG4 0x86
-#define MSG_REG5 0x87
-#define MSG_REG6 0x88
-#define MSG_REG7 0x89
-#define MSG_REG8 0x8A
-#define MSG_REG9 0x8B
-#define MSG_REGA 0x8C
-#define MSG_REGB 0x8D
-#define MSG_REGC 0x8E
-#define MSG_REGD 0x8F
-
-
diff --git a/src/vendorcode/amd/cimx/sb800/ECfanLIB.c b/src/vendorcode/amd/cimx/sb800/ECfanLIB.c deleted file mode 100644 index e5d0cda130..0000000000 --- a/src/vendorcode/amd/cimx/sb800/ECfanLIB.c +++ /dev/null @@ -1,87 +0,0 @@ -/**
- * @file
- *
- * Southbridge EC IO access common routine
- *
- */
-/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-#include "SBPLATFORM.h"
-#include "ECfan.h"
-
-VOID
-ReadECmsg (
- IN UINT8 Address,
- IN UINT8 OpFlag,
- OUT VOID* Value
- )
-{
- UINT8 i;
-
- OpFlag = OpFlag & 0x7f;
- if (OpFlag == 0x02) OpFlag = 0x03;
- for (i = 0; i <= OpFlag; i++) {
- WriteIO(MailBoxPort, AccWidthUint8, &Address); // EC_LDN9_MAILBOX_BASE_ADDRESS
- Address++;
- ReadIO(MailBoxPort + 1, AccWidthUint8, (UINT8 *)Value+i); // EC_LDN9_MAILBOX_BASE_ADDRESS
- }
-}
-
-
-VOID
-WriteECmsg (
- IN UINT8 Address,
- IN UINT8 OpFlag,
- IN VOID* Value
- )
-{
- UINT8 i;
-
- OpFlag = OpFlag & 0x7f;
- if (OpFlag == 0x02) OpFlag = 0x03;
- for (i = 0; i <= OpFlag; i++) {
- WriteIO(MailBoxPort, AccWidthUint8, &Address); // EC_LDN9_MAILBOX_BASE_ADDRESS
- Address++;
- WriteIO(MailBoxPort + 1, AccWidthUint8, (UINT8 *)Value+i); // EC_LDN9_MAILBOX_BASE_ADDRESS
- }
-}
-
-VOID
-WaitForEcLDN9MailboxCmdAck (
- VOID
- )
-{
- UINT8 Msgdata;
- UINT16 Delaytime;
- Msgdata = 0;
- for (Delaytime = 0; Delaytime <= 500; Delaytime++) {
- ReadECmsg (MSG_REG0, AccWidthUint8, &Msgdata);
- if ( Msgdata == 0xfa) {
- break;
- }
- SbStall (1000); // Wait for 1ms
- }
-}
-
-
diff --git a/src/vendorcode/amd/cimx/sb800/ECfanc.c b/src/vendorcode/amd/cimx/sb800/ECfanc.c deleted file mode 100644 index 44d1300626..0000000000 --- a/src/vendorcode/amd/cimx/sb800/ECfanc.c +++ /dev/null @@ -1,195 +0,0 @@ -/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-
-#include "SBPLATFORM.h"
-#include "ECfan.h"
-/**
- * Table for Function Number
- *
- *
- *
- *
- */
-const static UINT8 FunctionNumber[] =
-{
- Fun_81,
- Fun_83,
- Fun_85,
- Fun_89,
-};
-
-/**
- * Table for Max Thermal Zone
- *
- *
- *
- *
- */
-const static UINT8 MaxZone[] =
-{
- 4,
- 4,
- 4,
- 4,
-};
-
-/**
- * Table for Max Register
- *
- *
- *
- *
- */
-const static UINT8 MaxRegister[] =
-{
- MSG_REG9,
- MSG_REGB,
- MSG_REG9,
- MSG_REGA,
-};
-
-/*-------------------------------------------------------------------------------
-;Procedure: IsZoneFuncEnable
-;
-;Description: This routine will check every zone support function with BitMap from user define
-;
-;
-;Exit: None
-;
-;Modified: None
-;
-;-----------------------------------------------------------------------------
-*/
-BOOLEAN
-IsZoneFuncEnable (
- UINT16 Flag,
- UINT8 func,
- UINT8 Zone
-)
-{
- return (BOOLEAN)(((Flag >> (func *4)) & 0xF) & ((UINT8 )1 << Zone));
-}
-
-/*-------------------------------------------------------------------------------
-;Procedure: sbECfancontrolservice
-;
-;Description: This routine service EC fan policy
-;
-;
-;Exit: None
-;
-;Modified: None
-;
-;-----------------------------------------------------------------------------
-*/
-VOID
-sbECfancontrolservice (
- IN AMDSBCFG* pConfig
- )
-{
- UINT8 ZoneNum;
- UINT8 FunNum;
- UINT8 RegNum;
- UINT8 * CurPoint;
- UINT8 FunIndex;
- BOOLEAN IsSendEcMsg;
-
- CurPoint = &pConfig->Pecstruct.MSGFun81zone0MSGREG0 + MaxZone[0] * (MaxRegister[0] - MSG_REG0 + 1);
- for ( FunIndex = 1; FunIndex <= 3; FunIndex++ ) {
- FunNum = FunctionNumber[FunIndex];
- for ( ZoneNum = 0; ZoneNum < MaxZone[FunIndex]; ZoneNum++ ) {
- IsSendEcMsg = IsZoneFuncEnable (pConfig->Pecstruct.IMCFUNSupportBitMap, FunIndex, ZoneNum);
- for ( RegNum = MSG_REG0; RegNum <= MaxRegister[FunIndex]; RegNum++ ) {
- if (IsSendEcMsg) {
- WriteECmsg (RegNum, AccWidthUint8, CurPoint); //
- }
- CurPoint += 1;
- }
- if (IsSendEcMsg) {
- WriteECmsg (MSG_SYS_TO_IMC, AccWidthUint8, &FunNum); // function number
- WaitForEcLDN9MailboxCmdAck ();
- }
- }
- }
- CurPoint = &pConfig->Pecstruct.MSGFun81zone0MSGREG0;
- for ( FunIndex = 0; FunIndex <= 0; FunIndex++ ) {
- FunNum = FunctionNumber[FunIndex];
- for ( ZoneNum = 0; ZoneNum < MaxZone[FunIndex]; ZoneNum++ ) {
- IsSendEcMsg = IsZoneFuncEnable (pConfig->Pecstruct.IMCFUNSupportBitMap, FunIndex, ZoneNum);
- for ( RegNum = MSG_REG0; RegNum <= MaxRegister[FunIndex]; RegNum++ ) {
- if (IsSendEcMsg) {
- WriteECmsg (RegNum, AccWidthUint8, CurPoint); //
- }
- CurPoint += 1;
- }
- if (IsSendEcMsg) {
- WriteECmsg (MSG_SYS_TO_IMC, AccWidthUint8, &FunNum); // function number
- WaitForEcLDN9MailboxCmdAck ();
- }
- }
- }
-}
-
-/*-------------------------------------------------------------------------------
-;Procedure: SBIMCFanInitializeS3
-;
-;Description: This routine initialize IMC fan when S3 resume
-;
-;
-;Exit: None
-;
-;Modified: None
-;
-;-----------------------------------------------------------------------------
-*/
-VOID
-SBIMCFanInitializeS3 (VOID)
-{
- UINT8 dbPortStatus,Value80,Value82,Value83,Value84;
-
- getChipSysMode (&dbPortStatus);
- if ((dbPortStatus & ChipSysEcEnable) != 0) {
- Value80 = 0x98;
- Value82 = 0x00;
- Value83 = 0x02;
- Value84 = 0x00;
-
- // Clear MSG_REG0 to receive acknowledge byte
- WriteECmsg (MSG_REG0, AccWidthUint8, &Value82);
-
- // Set MSG_REG1
- // 0x02 - Notify IMC that the system is waken from any sleep state
- WriteECmsg (MSG_REG1, AccWidthUint8, &Value83);
-
- // Set timeout counter value to 00 which disables watchdog timer
- WriteECmsg (MSG_REG2, AccWidthUint8, &Value84);
-
- // Write mailbox function number to kick off the command
- // 0x98 - IMC System Sleep and Wake Services
- WriteECmsg (MSG_SYS_TO_IMC, AccWidthUint8, &Value80);
-
- // Read acknowledge byte to make sure function is executed properly
- WaitForEcLDN9MailboxCmdAck ();
- }
-}
diff --git a/src/vendorcode/amd/cimx/sb800/GEC.c b/src/vendorcode/amd/cimx/sb800/GEC.c deleted file mode 100644 index 2424894daa..0000000000 --- a/src/vendorcode/amd/cimx/sb800/GEC.c +++ /dev/null @@ -1,135 +0,0 @@ -/**
- * @file
- *
- * Config Southbridge GEC controller
- *
- * Init GEC features.
- *
- * @xrefitem bom "File Content Label" "Release Content"
- * @e project: CIMx-SB
- * @e sub-project:
- * @e \$Revision:$ @e \$Date:$
- *
- */
-/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-#include "SBPLATFORM.h"
-
-/**
- * gecInitBeforePciEnum - Config GEC controller before PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-gecInitBeforePciEnum (
- IN AMDSBCFG* pConfig
- )
-{
- UINT8 cimSBGecDebugBus;
- UINT8 cimSBGecPwr;
-
- cimSBGecDebugBus = (UINT8) pConfig->SBGecDebugBus;
- cimSBGecPwr = (UINT8) pConfig->SBGecPwr;
-#if SB_CIMx_PARAMETER == 0
- cimSBGecDebugBus = cimSBGecDebugBusDefault;
- cimSBGecPwr = cimSBGecPwrDefault;
-#endif
- if ( pConfig->GecConfig == 0) {
- // GEC Enabled
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF6, AccWidthUint8, ~BIT0, 0x00);
- RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GEVENT_REG11, AccWidthUint8, 0, 0x00);
- RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GEVENT_REG21, AccWidthUint8, 0, 0x01);
- RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG166, AccWidthUint8, 0, 0x01);
- //RWMEM (ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG181, AccWidthUint8, 0, 0x01);
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF8, AccWidthUint8, ~(BIT5 + BIT6), (UINT8) ((cimSBGecPwr) << 5));
- } else {
- // GEC Disabled
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF6, AccWidthUint8, ~BIT0, BIT0);
- return; //return if GEC controller is disabled.
- }
- if ( cimSBGecDebugBus == 1) {
- // GEC Debug Bus Enabled
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF6, AccWidthUint8, ~BIT3, BIT3);
- } else {
- // GEC Debug Bus Disabled
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF6, AccWidthUint8, ~BIT3, 0x00);
- }
-}
-
-/**
- * gecInitAfterPciEnum - Config GEC controller after PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-gecInitAfterPciEnum (
- IN AMDSBCFG* pConfig
- )
-{
- VOID* GecRomAddress;
- VOID* GecShadowRomAddress;
- UINT32 ddTemp;
- UINT8 dbVar;
- UINT8 dbTemp;
- if ( pConfig->GecConfig == 0) {
- dbVar = 0;
- ReadPCI ((GEC_BUS_DEV_FUN << 16) + SB_GEC_REG04, AccWidthUint8, &dbVar);
- dbTemp = 0x07;
- WritePCI ((GEC_BUS_DEV_FUN << 16) + SB_GEC_REG04, AccWidthUint8, &dbTemp);
- if ( !pConfig->DYNAMICGECROM.DynamicGecRomAddress_Ptr == NULL ) {
- GecRomAddress = pConfig->DYNAMICGECROM.DynamicGecRomAddress_Ptr;
- GecShadowRomAddress = (VOID*) (UINTN) pConfig->BuildParameters.GecShadowRomBase;
- AmdSbCopyMem (GecShadowRomAddress, GecRomAddress, 0x100);
- ReadPCI ((GEC_BUS_DEV_FUN << 16) + SB_GEC_REG10, AccWidthUint32, &ddTemp);
- ddTemp = ddTemp & 0xFFFFFFF0;
- RWMEM (ddTemp + 0x6804, AccWidthUint32, 0, BIT0 + BIT29);
- }
- WritePCI ((GEC_BUS_DEV_FUN << 16) + SB_GEC_REG04, AccWidthUint8, &dbVar);
- }
-}
-
-/**
- * gecInitLatePost - Prepare GEC controller to boot to OS.
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-gecInitLatePost (
- IN AMDSBCFG* pConfig
- )
-{
- if ( !pConfig->GecConfig == 0) {
- return; //return if GEC controller is disabled.
- }
-}
-
-
diff --git a/src/vendorcode/amd/cimx/sb800/Gpp.c b/src/vendorcode/amd/cimx/sb800/Gpp.c deleted file mode 100644 index 9f0c5c0b4a..0000000000 --- a/src/vendorcode/amd/cimx/sb800/Gpp.c +++ /dev/null @@ -1,887 +0,0 @@ -
-/**
- * @file
- *
- * Config Southbridge GPP controller
- *
- * Init GPP features.
- *
- * @xrefitem bom "File Content Label" "Release Content"
- * @e project: CIMx-SB
- * @e sub-project
- * @e \$Revision:$ @e \$Date:$
- *
- */
-/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-#include "SBPLATFORM.h"
-
-/**
- * PCIE_CAP_ID - PCIe Cap ID
- *
- */
-#define PCIE_CAP_ID 0x10
-
-//
-// Declaration of local functions
-//
-
-/**
- * PreInitGppLink - Enable GPP link training.
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
- VOID PreInitGppLink (IN AMDSBCFG* pConfig);
- UINT8 CheckGppLinkStatus (IN AMDSBCFG* pConfig);
- VOID AfterGppLinkInit (IN AMDSBCFG* pConfig);
- VOID sbGppForceGen2 (IN UINT32 portId );
- VOID sbGppForceGen1 (IN UINT32 portId );
- VOID sbGppDisableUnusedPadMap (IN AMDSBCFG* pConfig );
- VOID sbGppSetAspm (IN UINT32 pciAddress, IN UINT8 LxState);
- UINT8 sbFindPciCap (IN UINT32 pciAddress, IN UINT8 targetCapId);
-
-//
-// Declaration of external functions
-//
-
-//
-//-----------------------------------------------------------------------------------
-// Early SB800 GPP initialization sequence:
-//
-// 1) Set port enable bit fields by current GPP link configuration mode
-// 2) Deassert GPP reset and pull EP out of reset - Clear GPP_RESET (abcfg:0xC0[8] = 0)
-// 3) Loop polling for the link status of all ports
-// 4) Misc operations after link training:
-// - (optional) Detect GFX device
-// - Hide empty GPP configuration spaces (Disable empty GPP ports)
-// - (optional) Power down unused GPP ports
-// - (optional) Configure PCIE_P2P_Int_Map (abcfg:0xC4[7:0])
-// 5) GPP init completed
-//
-//
-// *) Gen2 vs Gen1
-// Gen2 mode Gen1 mode
-// ---------------------------------------------------------------
-// STRAP_PHY_PLL_CLKF[6:0] 7'h32 7'h19
-// STRAP_BIF_GEN2_EN 1 0
-//
-// PCIE_PHY_PLL clock locks @ 5GHz
-//
-//
-
-/**
- * GPP early programming and link training. On exit all populated EPs should be fully operational.
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-sbPcieGppEarlyInit (
- IN AMDSBCFG* pConfig
- )
-{
- UINT8 TogglePort;
- UINT8 portNum;
- UINT32 reg32Value;
- UINT8 retryCount;
- UINT8 cimGppMemWrImprove;
- UINT8 cimGppLaneReversal;
- UINT8 cimAlinkPhyPllPowerDown;
-
- cimGppMemWrImprove = pConfig->GppMemWrImprove;
- cimGppLaneReversal = (UINT8) pConfig->GppLaneReversal;
- cimAlinkPhyPllPowerDown = (UINT8) pConfig->AlinkPhyPllPowerDown;
-#if SB_CIMx_PARAMETER == 0
- cimGppMemWrImprove = cimGppMemWrImproveDefault;
- cimGppLaneReversal = cimGppLaneReversalDefault;
- cimAlinkPhyPllPowerDown = cimAlinkPhyPllPowerDownDefault;
-#endif
-
-//
-// Configure NB-SB link PCIE PHY PLL power down for L1
-//
- if ( cimAlinkPhyPllPowerDown == TRUE ) {
- UINT32 abValue;
- // Set PCIE_P_CNTL in Alink PCIEIND space
- writeAlink (SB_AX_INDXC_REG30 | (UINT32) (AXINDC << 29), 0x40);
- abValue = readAlink (SB_AX_DATAC_REG34 | (UINT32) (AXINDC << 29));
- abValue |= BIT12 + BIT3 + BIT0;
- abValue &= ~(BIT9 + BIT4);
- writeAlink (SB_AX_DATAC_REG34 | (UINT32) (AXINDC << 29), abValue);
- rwAlink (SB_AX_INDXC_REG02 | (UINT32) (AXINDC << 29), ~BIT8, (BIT8));
- }
-
-//
-// Set ABCFG 0x031C[0] = 1 enable the lane reversal support.
-//
- reg32Value = readAlink (SB_ABCFG_REG31C | (UINT32) (ABCFG << 29));
- if ( cimGppLaneReversal ) {
- writeAlink (SB_ABCFG_REG31C | (UINT32) (ABCFG << 29), reg32Value | BIT0);
- } else {
- writeAlink (SB_ABCFG_REG31C | (UINT32) (ABCFG << 29), reg32Value | 0x00);
- }
-//
-// Set abcfg:0x90[20] = 1 to enable GPP bridge multi-function
-//
- reg32Value = readAlink (SB_ABCFG_REG90 | (UINT32) (ABCFG << 29));
- writeAlink (SB_ABCFG_REG90 | (UINT32) (ABCFG << 29), reg32Value | BIT20);
-
-
-//
-// Initialize and configure GPP
-//
- if (pConfig->GppFunctionEnable) {
- // PreInit - Enable GPP link training
- PreInitGppLink (pConfig);
-
-//
-// GPP Upstream Memory Write Arbitration Enhancement ABCFG 0x54[26] = 1
-// GPP Memory Write Max Payload Improvement RCINDC_Reg 0x10[12:10] = 0x4
-//
- if ( cimGppMemWrImprove == TRUE ) {
- rwAlink (SB_ABCFG_REG54 | (UINT32) (ABCFG << 29), ~BIT26, (BIT26));
- rwAlink (SB_RCINDXC_REG10 | (UINT32) (RCINDXC << 29), ~(BIT12 + BIT11 + BIT10), (BIT12));
- }
-
- if ( pConfig->S3Resume ) {
- for ( portNum = 0; portNum < MAX_GPP_PORTS; portNum++ ) {
- reg32Value = readAlink ((SB_ABCFG_REG340 + portNum * 4) | (UINT32) (ABCFG << 29));
- writeAlink ((SB_ABCFG_REG340 + portNum * 4) | (UINT32) (ABCFG << 29), reg32Value & ~BIT21);
- }
- }
- //
- // a) Loop polling regA5 -> LcState (timeout ~100ms);
- // b) if (LcState[5:0] == 0x10), training successful, go to g);
- // c) if any of (LcState[13:8], [21:16], [29:24]) == 0x29 or 0x2A:
- // d) Clear De-emphasis bit for relevant ports;
- // e) Toggle GPP reset signal (via OEM callback);
- // f) go back to a);
- // g) exit;
- //
- for (retryCount = 0; retryCount < MAX_GPP_RESETS; retryCount++) {
- // Polling each GPP port for link status
- TogglePort = CheckGppLinkStatus (pConfig);
-
- if (TogglePort == 0) {
- break;
- } else {
- // Check failure port and clear STRAP_BIF_DE_EMPHASIS_SEL_x_GPP bit (abcfg:0x34[0, 4, 8, C][21]=0)
- for ( portNum = 0; portNum < MAX_GPP_PORTS; portNum++ ) {
- if (TogglePort & (1 << portNum)) {
- reg32Value = readAlink ((SB_ABCFG_REG340 + portNum * 4) | (UINT32) (ABCFG << 29));
- writeAlink ((SB_ABCFG_REG340 + portNum * 4) | (UINT32) (ABCFG << 29), reg32Value & ~BIT21);
- }
- sbGppForceGen1 (portNum);
- }
-
- // Toggle GPP reset (Note this affects all SB800 GPP ports)
- CallBackToOEM (CB_SBGPP_RESET_ASSERT, (UINT32)TogglePort, pConfig);
- SbStall (500);
- CallBackToOEM (CB_SBGPP_RESET_DEASSERT, (UINT32)TogglePort, pConfig);
- }
- };
-
- // Misc operations after link training
- AfterGppLinkInit (pConfig);
- } else {
-
-// RPR 5.11 Power Saving With GPP Disable
-// ABCFG 0xC0[8] = 0x0
-// ABCFG 0xC0[15:12] = 0xF
-// Enable "Power Saving Feature for A-Link Express Lanes"
-// Enable "Power Saving Feature for GPP Lanes"
-// ABCFG 0x90[19] = 1
-// ABCFG 0x90[6] = 1
-// RCINDC_Reg 0x65 [27:0] = 0xFFFFFFF
-// ABCFG 0xC0[7:4] = 0x0
-
- rwAlink (SB_ABCFG_REGC0 | (UINT32) (ABCFG << 29), ~BIT8, (BIT4 + BIT5 + BIT6 + BIT7));
- rwAlink (SB_ABCFG_REGC0 | (UINT32) (ABCFG << 29), 0xFFFFFFFF, (BIT12 + BIT13 + BIT14 + BIT15));
- rwAlink (SB_AX_INDXC_REG40, ~(BIT9 + BIT4), (BIT0 + BIT3 + BIT12));
- rwAlink (RC_INDXC_REG40, ~(BIT9 + BIT4), (BIT0 + BIT3 + BIT12));
- rwAlink ((SB_ABCFG_REG90 | (UINT32) (ABCFG << 29)), 0xFFFFFFFF, (BIT6 + BIT19));
- rwAlink (RC_INDXC_REG65, 0xFFFFFFFF, 0x0fffffff);
- rwAlink ((SB_ABCFG_REGC0 | (UINT32) (ABCFG << 29)), ~(BIT4 + BIT5 + BIT6 + BIT7), 0);
- }
- sbGppDisableUnusedPadMap ( pConfig );
-}
-
-/**
- * PreInitGppLink - Enable GPP link training.
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-PreInitGppLink (
- IN AMDSBCFG* pConfig
- )
-{
- UINT8 portMask[5] = {0x01,
- 0x00,
- 0x03,
- 0x07,
- 0x0F
- };
- UINT8 cfgMode;
- UINT8 portId;
- UINT32 reg32Value;
- UINT16 tmp16Value;
-
-// PCIE_GPP_ENABLE (abcfg:0xC0):
-//
-// GPP_LINK_CONFIG ([3:0]) PortA PortB PortC PortD Description
-// ----------------------------------------------------------------------------------
-// 0000 0-3 x4 Config
-// 0001 N/A
-// 0010 0-1 2-3 0 2:2 Config
-// 0011 0-1 2 3 2:1:1 Config
-// 0100 0 1 2 3 1:1:1:1 Config
-//
-// For A12 and above:
-// ABCFG:0xC0[12] - Port A hold training (default 1)
-// ABCFG:0xC0[13] - Port B hold training (default 1)
-// ABCFG:0xC0[14] - Port C hold training (default 1)
-// ABCFG:0xC0[15] - Port D hold training (default 1)
-//
-//
- //
- // Set port enable bit fields based on current GPP link configuration mode
- //
- cfgMode = (UINT8) pConfig->GppLinkConfig;
- if ( cfgMode > GPP_CFGMODE_X1111 || cfgMode == 1 ) {
- cfgMode = GPP_CFGMODE_X4000;
- pConfig->GppLinkConfig = GPP_CFGMODE_X4000;
- }
- reg32Value = (UINT32) portMask[cfgMode];
-
- // Mask out non-applicable ports according to the target link configuration mode
- for ( portId = 0; portId < MAX_GPP_PORTS; portId++ ) {
- pConfig->PORTCONFIG[portId].PortCfg.PortPresent &= (reg32Value >> portId) & BIT0;
- }
-
- //
- // Deassert GPP reset and pull EP out of reset - Clear GPP_RESET (abcfg:0xC0[8] = 0)
- //
- tmp16Value = (UINT16) (~reg32Value << 12);
- reg32Value = (UINT32) (tmp16Value + (reg32Value << 4) + cfgMode);
- writeAlink (SB_ABCFG_REGC0 | (UINT32) (ABCFG << 29), reg32Value);
-
- reg32Value = readAlink (0xC0 | (UINT32) (RCINDXC << 29));
- writeAlink (0xC0 | (UINT32) (RCINDXC << 29), reg32Value | 0x400); // Set STRAP_F0_MSI_EN
-
- // A-Link L1 Entry Delay Shortening
- // AXINDP_Reg 0xA0[7:4] = 0x3
- rwAlink (SB_AX_INDXP_REGA0, 0xFFFFFF0F, 0x30);
- rwAlink (SB_AX_INDXP_REGB1, 0xFFFFFFFF, BIT19);
- rwAlink (SB_AX_INDXP_REGB1, 0xFFFFFFFF, BIT28);
-
- // RPR5.22 GPP L1 Entry Delay Shortening
- // RCINDP_Reg 0xA0[7:4] = 0x1 Enter L1 sooner after ACK'ing PM request.
- // This is done to reduce number of NAK received with L1 enabled.
- for ( portId = 0; portId < MAX_GPP_PORTS; portId++ ) {
- rwAlink (SB_RCINDXP_REGA0 | portId << 24, 0xFFFFFF0F, 0x10);
- }
-}
-
-/**
- * CheckGppLinkStatus - loop polling the link status for each GPP port
- *
- *
- * Return: ToggleStatus[3:0] = Port bitmap for those need to clear De-emphasis
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-UINT8
-CheckGppLinkStatus (
- IN AMDSBCFG* pConfig
- )
-{
- UINT32 retryCounter;
- UINT32 portId;
- UINT32 abIndex;
- UINT32 Data32;
- UINT8 portScanMap;
- UINT8 portScanMap2;
- UINT8 ToggleStatus;
- UINT16 i;
- SBGPPPORTCONFIG *portCfg;
-
-
- portScanMap = 0;
- retryCounter = MAX_TRAINING_RETRY;
- ToggleStatus = 0;
-
- // Obtain a list of ports to be checked
- for ( portId = 0; portId < MAX_GPP_PORTS; portId++ ) {
- portCfg = &pConfig->PORTCONFIG[portId].PortCfg;
- if ( portCfg->PortPresent == TRUE && portCfg->PortDetected == FALSE ) {
- portScanMap |= 1 << portId;
- }
- }
- portScanMap2 = portScanMap;
-
- //
- // After training is enabled, Check LCSTATE for each port, if LCSTATE<= 4, then keep
- // polling for up to 40ms. If LCSTATE still <= 4, then assume the port to be empty.
- //
- i = 400;
- while ( --i && portScanMap2) {
- for (portId = 0; portId < MAX_GPP_PORTS; portId++) {
- portCfg = &pConfig->PORTCONFIG[portId].PortCfg;
- if (((portCfg->PortHotPlug == FALSE) || ((portCfg->PortHotPlug == TRUE) && (pConfig->S3Resume == FALSE)) ) && (portScanMap2 & (1 << portId))) {
- //
- // Get port link state (reading LC_CURRENT_STATE of PCIEIND_P)
- //
- abIndex = SB_RCINDXP_REGA5 | (UINT32) (RCINDXP << 29) | (portId << 24);
- Data32 = readAlink (abIndex) & 0x3F;
- if ((UINT8) (Data32) > 4) {
- portScanMap2 &= ~(1 << portId); // This port is not empty
- break;
- }
- SbStall (100); // Delay 100us
- }
- }
- }
- portScanMap &= ~portScanMap2; // Mark remaining ports as empty
-
-
- while ( --retryCounter && portScanMap ) {
- for ( portId = 0; portId < MAX_GPP_PORTS; portId++ ) {
- portCfg = &pConfig->PORTCONFIG[portId].PortCfg;
- if (( portCfg->PortHotPlug == TRUE ) && ( pConfig->S3Resume )) {
- continue;
- }
- if ( portCfg->PortPresent == TRUE && portCfg->PortDetected == FALSE ) {
- //
- // Get port link state (reading LC_CURRENT_STATE of PCIEIND_P)
- //
- SbStall (1000); // Delay 400us
- abIndex = SB_RCINDXP_REGA5 | (UINT32) (RCINDXP << 29) | (portId << 24);
- Data32 = readAlink (abIndex) & 0x3F3F3F3F;
-
- if ( (UINT8) (Data32) == 0x10 ) {
- portCfg->PortDetected = TRUE;
- portScanMap &= ~(1 << portId);
- } else {
- for (i = 0; i < 4; i++) {
- //
- // Compliance mode (0x7), downgrade from Gen2 to Gen1 (*A12)
- //
- if ((UINT8) (Data32) == 0x29 || (UINT8) (Data32) == 0x2A || (UINT8) (Data32) == 0x7 ) {
- ToggleStatus |= (1 << portId); // A11 only: need to toggle GPP reset
- portScanMap &= ~(1 << portId);
- }
- Data32 >>= 8;
- }
- }
- }
- }
- }
- return ToggleStatus;
-}
-
-
-/**
- * AfterGppLinkInit
- * - Search for display device behind each GPP port
- * - If the port is empty AND not hotplug-capable:
- * * Turn off link training
- * * (optional) Power down the port
- * * Hide the configuration space (Turn off the port)
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-AfterGppLinkInit (
- IN AMDSBCFG* pConfig
- )
-{
- UINT32 portId;
- SBGPPPORTCONFIG *portCfg;
- UINT32 regBusNumber;
- UINT32 abValue;
- UINT32 abIndex;
- UINT32 i;
- UINT32 Data32;
- UINT8 bValue;
- UINT8 cimGppGen2;
-
- cimGppGen2 = pConfig->GppGen2;
-#if SB_CIMx_PARAMETER == 0
- cimGppGen2 = cimGppGen2Default;
-#endif
-
- bValue = GPP_EFUSE_LOCATION;
- getEfuseStatus (&bValue);
- if ( (bValue & GPP_GEN2_EFUSE_BIT) != 0 ) {
- cimGppGen2 = FALSE;
- } else {
- pConfig->CoreGen2Enable = TRUE; // Output for platform use
- }
-
-//GPP Gen2 Speed Change
-// if ((GPP Gen2 == enabled) and (RCINDP_Reg 0xA4[0] == 0x1)) {
-// PCIe_Cfg 0x88[3:0] = 0x2
-// RCINDP_Reg 0xA2[13] = 0x0
-// RCINDP_Reg 0xC0[15] = 0x0
-// RCINDP_Reg 0xA4[29] = 0x1
-// } else {
-// PCIe_Cfg 0x88[3:0] = 0x1
-// RCINDP_Reg 0xA4[0] = 0x0
-// RCINDP_Reg 0xA2[13] = 0x1
-// RCINDP_Reg 0xC0[15] = 0x0
-// RCINDP_Reg 0xA4[29] = 0x1
-// }
- for ( portId = 0; portId < MAX_GPP_PORTS; portId++ ) {
- portCfg = &pConfig->PORTCONFIG[portId].PortCfg;
- abValue = readAlink (SB_RCINDXP_REGA4 | portId << 24) & BIT0;
- if (( cimGppGen2 == TRUE ) && (abValue == BIT0) && (portCfg->PortDetected == TRUE)) {
- portCfg->PortIsGen2 = TRUE; // Output for platform use
- sbGppForceGen2 (portId);
- //_asm {jmp $};
- SbStall (400); // Delay 400us
- i = 500;
- Data32 = 0;
- while ( --i ) {
- abIndex = SB_RCINDXP_REGA5 | (UINT32) (RCINDXP << 29) | (portId << 24);
- Data32 = readAlink (abIndex) & 0x3F;
- if ((UINT8) (Data32) == 0x10) {
- break;
- }
- SbStall (400); // Delay 100us
- }
- if (!( (UINT8) (Data32) == 0x10 )) {
- if (pConfig->GppCompliance == FALSE) {
- portCfg->PortIsGen2 = FALSE; // Revert to default; output for platform use
- sbGppForceGen1 (portId);
- }
- }
- } else {
- if (pConfig->GppCompliance == FALSE) {
- sbGppForceGen1 (portId);
- }
- }
-//RPR 5.9 Link Bandwidth Notification Capability Enable
-//RCINDC 0xC1[0] = 1
-//PCIe Cfg 0x68[10] = 0
-//PCIe Cfg 0x68[11] = 0
-
- rwAlink (SB_RCINDXC_REGC1, 0xFFFFFFFF, BIT0);
- RWPCI (PCI_ADDRESS (0, GPP_DEV_NUM, portId, 0x68), AccWidthUint16, ~(BIT10 + BIT11), 0);
- }
-
-// Status = AGESA_SUCCESS;
- pConfig->GppFoundGfxDev = 0;
- abValue = readAlink (SB_ABCFG_REGC0 | (UINT32) (ABCFG << 29));
-
- for ( portId = 0; portId < MAX_GPP_PORTS; portId++ ) {
- portCfg = &pConfig->PORTCONFIG[portId].PortCfg;
- // Check if there is GFX device behind each GPP port
- if ( portCfg->PortDetected == TRUE ) {
- regBusNumber = (SBTEMP_BUS << 16) + (SBTEMP_BUS << 8);
- WritePCI (PCI_ADDRESS (0, GPP_DEV_NUM, portId, 0x18), AccWidthUint32, ®BusNumber);
- // *** Stall ();
- ReadPCI (PCI_ADDRESS (SBTEMP_BUS, 0, 0, 0x0B), AccWidthUint8, &bValue);
- if ( bValue == 3 ) {
- pConfig->GppFoundGfxDev |= (1 << portId);
- }
- regBusNumber = 0;
- WritePCI (PCI_ADDRESS (0, GPP_DEV_NUM, portId, 0x18), AccWidthUint32, ®BusNumber);
- }
-
- // Mask off non-applicable ports
- else if ( portCfg->PortPresent == FALSE ) {
- abValue &= ~(1 << (portId + 4));
- }
- // Mask off empty port if the port is not hotplug-capable
- else if ( portCfg->PortHotPlug == FALSE ) {
- abValue &= ~(1 << (portId + 4));
- }
- // Clear STRAP_BIF_DE_EMPHASIS_SEL_x_GPP bit (abcfg:0x34[0, 4, 8, C][21]=0) to make hotplug working
- if ( portCfg->PortHotPlug == TRUE ) {
- rwAlink ((SB_ABCFG_REG340 + portId * 4) | (UINT32) (ABCFG << 29), ~BIT21, 0);
-
-// RPR5.12 Hot Plug: PCIe Native Support
-// RCINDP_Reg 0x10[3] = 0x1
-// PCIe_Cfg 0x5A[8] = 0x1
-// PCIe_Cfg 0x6C[6] = 0x1
-// RCINDP_Reg 0x20[19] = 0x0
-
- rwAlink ((SB_RCINDXP_REG10 | (UINT32) (RCINDXP << 29) | (portId << 24)), 0xFFFFFFFF, BIT3);
- RWPCI (PCI_ADDRESS (0, GPP_DEV_NUM, portId, 0x5b), AccWidthUint8, 0xff, BIT0);
- RWPCI (PCI_ADDRESS (0, GPP_DEV_NUM, portId, 0x6c), AccWidthUint8, 0xff, BIT6);
- rwAlink ((SB_RCINDXP_REG20 | (UINT32) (RCINDXP << 29) | (portId << 24)), ~BIT19, 0);
- }
- }
- if ( pConfig->GppUnhidePorts == FALSE ) {
- if ((abValue & 0xF0) == 0) {
- abValue = BIT8; // if all ports are empty set GPP_RESET
- } else if ((abValue & 0xE0) != 0 && (abValue & 0x10) == 0) {
- abValue |= BIT4; // PortA should always be visible whenever other ports are exist
- }
-
- // Update GPP_Portx_Enable (abcfg:0xC0[7:5])
- writeAlink (SB_ABCFG_REGC0 | (UINT32) (ABCFG << 29), abValue);
- }
-
- //
- // Common initialization for open GPP ports
- //
- for ( portId = 0; portId < MAX_GPP_PORTS; portId++ ) {
- ReadPCI (PCI_ADDRESS (0, GPP_DEV_NUM, portId, 0x80), AccWidthUint8, &bValue);
- if (bValue != 0xff) {
- // Set pciCfg:PCIE_DEVICE_CNTL2[3:0] = 4'h6 (0x80[3:0])
- bValue &= 0xf0;
- bValue |= 0x06;
- WritePCI (PCI_ADDRESS (0, GPP_DEV_NUM, portId, 0x80), AccWidthUint8, &bValue);
-
- // Set PCIEIND_P:PCIE_RX_CNTL[RX_RCB_CPL_TIMEOUT_MODE] (0x70:[19]) = 1
- abIndex = SB_RCINDXP_REG70 | (UINT32) (RCINDXP << 29) | (portId << 24);
- abValue = readAlink (abIndex) | BIT19;
- writeAlink (abIndex, abValue);
-
- // Set PCIEIND_P:PCIE_TX_CNTL[TX_FLUSH_TLP_DIS] (0x20:[19]) = 0
- abIndex = SB_RCINDXP_REG20 | (UINT32) (RCINDXP << 29) | (portId << 24);
- abValue = readAlink (abIndex) & ~BIT19;
- writeAlink (abIndex, abValue);
-
- }
- }
-}
-
-
-/**
- * sbPcieGppLateInit - Late PCIE initialization for SB800 GPP component
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-sbPcieGppLateInit (
- IN AMDSBCFG* pConfig
- )
-{
- UINT32 reg32Value;
- UINT8 portId;
- UINT8 busNum;
- UINT8 aspmValue;
- UINT8 reg8Value;
- UINT8 cimGppPhyPllPowerDown;
-
- reg8Value = 0x01;
-//
-// Configure ASPM
-//
-// writeAlink (0xC0 | (UINT32) (RCINDXC << 29), 0x400); // Set STRAP_F0_MSI_EN
- aspmValue = (UINT8)pConfig->GppPortAspm;
- cimGppPhyPllPowerDown = (UINT8) pConfig->GppPhyPllPowerDown;
-#if SB_CIMx_PARAMETER == 0
- aspmValue = cimGppPortAspmDefault;
- cimGppPhyPllPowerDown = cimGppPhyPllPowerDownDefault;
-#endif
-
- for ( portId = 0; portId < MAX_GPP_PORTS; portId++ ) {
- // write pci_reg3d with 0x01 to fix yellow mark for GPP bridge under Vista
- // when native PCIE is enabled but MSI is not available
- // SB02029: SB800 BIF/GPP allowing strap STRAP_BIF_INTERRUPT_PIN_SB controlled by AB reg
- WritePCI (PCI_ADDRESS (0, 21, portId, 0x3d), AccWidthUint8, ®8Value);
- ReadPCI (PCI_ADDRESS (0, 21, portId, 0x19), AccWidthUint8, &busNum);
- if (busNum != 0xFF) {
- ReadPCI (PCI_ADDRESS (busNum, 0, 0, 0x00), AccWidthUint32, ®32Value);
- if (reg32Value != 0xffffffff) {
- // Set ASPM on EP side
- sbGppSetAspm (PCI_ADDRESS (busNum, 0, 0, 0), aspmValue & 0x3);
- // Set ASPM on port side
- sbGppSetAspm (PCI_ADDRESS (0, 21, portId, 0), aspmValue & 0x3);
- }
- }
- aspmValue = aspmValue >> 2;
- }
-
-//
-// Configure Lock HWInit registers
-//
- reg32Value = readAlink (SB_ABCFG_REGC0 | (UINT32) (ABCFG << 29));
- if (reg32Value & 0xF0) {
- reg32Value = readAlink (SB_RCINDXC_REG10 | (UINT32) (RCINDXC << 29));
- writeAlink (SB_RCINDXC_REG10 | (UINT32) (RCINDXC << 29), reg32Value | BIT0); // Set HWINIT_WR_LOCK
-
- if ( cimGppPhyPllPowerDown == TRUE ) {
-//
-// RPR 5.4 Power Saving Feature for GPP Lanes
-//
- UINT32 abValue;
- // Set PCIE_P_CNTL in Alink PCIEIND space
- abValue = readAlink (RC_INDXC_REG40 | (UINT32) (RCINDXC << 29));
- abValue |= BIT12 + BIT3 + BIT0;
- abValue &= ~(BIT9 + BIT4);
- writeAlink (RC_INDXC_REG40 | (UINT32) (RCINDXC << 29), abValue);
- }
- }
-
-//
-// Configure Lock HWInit registers
-//
- reg32Value = readAlink (SB_ABCFG_REGC0 | (UINT32) (ABCFG << 29));
-//
-// Disable hidden register decode and serial number capability
-//
- reg32Value = readAlink (SB_ABCFG_REG330 | (UINT32) (ABCFG << 29));
- writeAlink (SB_ABCFG_REG330 | (UINT32) (ABCFG << 29), reg32Value & ~(BIT26 + BIT10));
-}
-
-/**
- * sbGppSetAspm - Set SPP ASPM
- *
- *
- * @param[in] pciAddress PCI Address.
- * @param[in] LxState Lane State.
- *
- */
-VOID
-sbGppSetAspm (
- IN UINT32 pciAddress,
- IN UINT8 LxState
- )
-{
- UINT8 pcieCapOffset;
- UINT8 value8;
- UINT8 maxFuncs;
- UINT32 devBDF;
-
- maxFuncs = 1;
- ReadPCI (pciAddress + 0x0E, AccWidthUint8, &value8);
-
- if (value8 & BIT7) {
- maxFuncs = 8; // multi-function device
- }
- while (maxFuncs != 0) {
- devBDF = pciAddress + (UINT32) ((maxFuncs - 1) << 16);
- pcieCapOffset = sbFindPciCap (devBDF, PCIE_CAP_ID);
- if (pcieCapOffset) {
- // Read link capabilities register (0x0C[11:10] - ASPM support)
- ReadPCI (devBDF + pcieCapOffset + 0x0D, AccWidthUint8, &value8);
- if (value8 & BIT2) {
- value8 = (value8 >> 2) & (BIT1 + BIT0);
- // Set ASPM state in link control register
- RWPCI (devBDF + pcieCapOffset + 0x10, AccWidthUint8, 0xffffffff, LxState & value8);
- }
- }
- maxFuncs--;
- }
-}
-
-/**
- * sbFindPciCap - Find PCI Cap
- *
- *
- * @param[in] pciAddress PCI Address.
- * @param[in] targetCapId Target Cap ID.
- *
- */
-UINT8
-sbFindPciCap (
- IN UINT32 pciAddress,
- IN UINT8 targetCapId
- )
-{
- UINT8 NextCapPtr;
- UINT8 CapId;
-
- NextCapPtr = 0x34;
- while (NextCapPtr != 0) {
- ReadPCI (pciAddress + NextCapPtr, AccWidthUint8, &NextCapPtr);
- if (NextCapPtr == 0xff) {
- return 0;
- }
- if (NextCapPtr != 0) {
- ReadPCI (pciAddress + NextCapPtr, AccWidthUint8, &CapId);
- if (CapId == targetCapId) {
- break;
- } else {
- NextCapPtr++;
- }
- }
- }
- return NextCapPtr;
-}
-
-/**
- * sbGppForceGen2 - Set SPP to GENII
- *
- *
- * @param[in] portId
- *
- */
-VOID
-sbGppForceGen2 (
- IN UINT32 portId
- )
-{
- RWPCI (PCI_ADDRESS (0, GPP_DEV_NUM, portId, 0x88), AccWidthUint8, 0xf0, 0x02);
- rwAlink (SB_RCINDXP_REGA2 | portId << 24, ~BIT13, 0);
- rwAlink (SB_RCINDXP_REGC0 | portId << 24, ~BIT15, 0);
- rwAlink (SB_RCINDXP_REGA4 | portId << 24, 0xFFFFFFFF, BIT29);
-}
-
-/**
- * sbGppForceGen1 - Set SPP to GENI
- *
- *
- * @param[in] portId
- *
- */
-VOID
-sbGppForceGen1 (
- IN UINT32 portId
- )
-{
- RWPCI (PCI_ADDRESS (0, GPP_DEV_NUM, portId, 0x88), AccWidthUint8, 0xf0, 0x01);
- rwAlink (SB_RCINDXP_REGA4 | portId << 24, ~BIT0, 0);
- rwAlink (SB_RCINDXP_REGA2 | portId << 24, 0xFFFFFFFF, BIT13);
- rwAlink (SB_RCINDXP_REGC0 | portId << 24, ~BIT15, 0);
- rwAlink (SB_RCINDXP_REGA4 | portId << 24, 0xFFFFFFFF, BIT29);
-}
-
-/**
- * sbGppDisableUnusedPadMap - Return GPP Pad Map
- *
- *
- * @param[in] pConfig
- *
- */
-VOID
-sbGppDisableUnusedPadMap (
- IN AMDSBCFG* pConfig
- )
-{
- UINT32 Data32;
- UINT32 HoldData32;
- SBGPPPORTCONFIG *portCfg;
- UINT8 cimGppLaneReversal;
- UINT8 cimAlinkPhyPllPowerDown;
- UINT8 cimGppPhyPllPowerDown;
-
- cimAlinkPhyPllPowerDown = (UINT8) pConfig->AlinkPhyPllPowerDown;
- cimGppLaneReversal = (UINT8) pConfig->GppLaneReversal;
- cimGppPhyPllPowerDown = (UINT8) pConfig->GppPhyPllPowerDown;
-#if SB_CIMx_PARAMETER == 0
- cimGppLaneReversal = cimGppLaneReversalDefault;
- cimAlinkPhyPllPowerDown = cimAlinkPhyPllPowerDownDefault;
- cimGppPhyPllPowerDown = cimGppPhyPllPowerDownDefault;
-#endif
-
- Data32 = 0;
- HoldData32 = 0;
- switch ( pConfig->GppLinkConfig ) {
- case GPP_CFGMODE_X4000:
- portCfg = &pConfig->PORTCONFIG[0].PortCfg;
- if ( portCfg->PortDetected == FALSE ) {
- Data32 |= 0x0f0f;
- HoldData32 |= 0x1000;
- }
- break;
- case GPP_CFGMODE_X2200:
- portCfg = &pConfig->PORTCONFIG[0].PortCfg;
- if ( portCfg->PortDetected == FALSE ) {
- Data32 |= ( cimGppLaneReversal )? 0x0c0c:0x0303;
- HoldData32 |= 0x1000;
- }
- portCfg = &pConfig->PORTCONFIG[1].PortCfg;
- if ( portCfg->PortDetected == FALSE ) {
- Data32 |= ( cimGppLaneReversal )? 0x0303:0x0c0c;
- HoldData32 |= 0x2000;
- }
- break;
- case GPP_CFGMODE_X2110:
- portCfg = &pConfig->PORTCONFIG[0].PortCfg;
- if ( portCfg->PortDetected == FALSE ) {
- Data32 |= ( cimGppLaneReversal )? 0x0c0c:0x0303;
- HoldData32 |= 0x1000;
- }
- portCfg = &pConfig->PORTCONFIG[1].PortCfg;
- if ( portCfg->PortDetected == FALSE ) {
- Data32 |= ( cimGppLaneReversal )? 0x0202:0x0404;
- HoldData32 |= 0x2000;
- }
- portCfg = &pConfig->PORTCONFIG[2].PortCfg;
- if ( portCfg->PortDetected == FALSE ) {
- Data32 |= ( cimGppLaneReversal )? 0x0101:0x0808;
- HoldData32 |= 0x4000;
- }
- break;
- case GPP_CFGMODE_X1111:
- portCfg = &pConfig->PORTCONFIG[0].PortCfg;
- if ( portCfg->PortDetected == FALSE ) {
- Data32 |= ( cimGppLaneReversal )? 0x0808:0x0101;
- HoldData32 |= 0x1000;
- }
- portCfg = &pConfig->PORTCONFIG[1].PortCfg;
- if ( portCfg->PortDetected == FALSE ) {
- Data32 |= ( cimGppLaneReversal )? 0x0404:0x0202;
- HoldData32 |= 0x2000;
- }
- portCfg = &pConfig->PORTCONFIG[2].PortCfg;
- if ( portCfg->PortDetected == FALSE ) {
- Data32 |= ( cimGppLaneReversal )? 0x0202:0x0404;
- HoldData32 |= 0x4000;
- }
- portCfg = &pConfig->PORTCONFIG[3].PortCfg;
- if ( portCfg->PortDetected == FALSE ) {
- Data32 |= ( cimGppLaneReversal )? 0x0101:0x0808;
- HoldData32 |= 0x8000;
- }
- break;
- default:
- break;
- }
-
-// RPR 5.11 Power Saving With GPP Disable
-// ABCFG 0xC0[8] = 0x0
-// ABCFG 0xC0[15:12] = 0xF
-// Enable "Power Saving Feature for A-Link Express Lanes"
-// Enable "Power Saving Feature for GPP Lanes"
-// ABCFG 0x90[19] = 1
-// ABCFG 0x90[6] = 1
-// RCINDC_Reg 0x65 [27:0] = 0xFFFFFFF
-// ABCFG 0xC0[7:4] = 0x0
- if ( (Data32 & 0xf) == 0xf ) Data32 |= 0x0cff0000;
- if ( cimAlinkPhyPllPowerDown && cimGppPhyPllPowerDown ) {
- rwAlink (SB_ABCFG_REGC0 | (UINT32) (ABCFG << 29), ~BIT8, 0);
- rwAlink (SB_ABCFG_REGC0 | (UINT32) (ABCFG << 29), 0xFFFFFFFF, HoldData32);
- rwAlink (SB_AX_INDXC_REG40, ~(BIT9 + BIT4), (BIT0 + BIT3 + BIT12));
- rwAlink (RC_INDXC_REG40, ~(BIT9 + BIT4), (BIT0 + BIT3 + BIT12));
- rwAlink ((SB_ABCFG_REG90 | (UINT32) (ABCFG << 29)), 0xFFFFFFFF, (BIT6 + BIT19));
- rwAlink (RC_INDXC_REG65, 0xFFFFFFFF, Data32);
- }
-}
diff --git a/src/vendorcode/amd/cimx/sb800/IOLIB.c b/src/vendorcode/amd/cimx/sb800/IOLIB.c deleted file mode 100644 index 65344c203f..0000000000 --- a/src/vendorcode/amd/cimx/sb800/IOLIB.c +++ /dev/null @@ -1,81 +0,0 @@ -/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-#include "SBPLATFORM.h"
-
-
-VOID
-ReadIO (
- IN UINT16 Address,
- IN UINT8 OpFlag,
- IN VOID* Value
- )
-{
- OpFlag = OpFlag & 0x7f;
- switch ( OpFlag ) {
- case AccWidthUint8:
- *(UINT8*)Value = ReadIo8 (Address);
- break;
- case AccWidthUint16:
- *(UINT16*)Value = ReadIo16 (Address);
- break;
- case AccWidthUint32:
- *(UINT32*)Value = ReadIo32 (Address);
- break;
- }
-}
-
-VOID
-WriteIO (
- IN UINT16 Address,
- IN UINT8 OpFlag,
- IN VOID* Value
- )
-{
- OpFlag = OpFlag & 0x7f;
- switch ( OpFlag ) {
- case AccWidthUint8:
- WriteIo8 (Address, *(UINT8*)Value);
- break;
- case AccWidthUint16:
- WriteIo16 (Address, *(UINT16*)Value);
- break;
- case AccWidthUint32:
- WriteIo32 (Address, *(UINT32*)Value);
- break;
- }
-}
-
-VOID
-RWIO (
- IN UINT16 Address,
- IN UINT8 OpFlag,
- IN UINT32 Mask,
- IN UINT32 Data
- )
-{
- UINT32 Result;
- ReadIO (Address, OpFlag, &Result);
- Result = (Result & Mask) | Data;
- WriteIO (Address, OpFlag, &Result);
-}
diff --git a/src/vendorcode/amd/cimx/sb800/LEGACY.c b/src/vendorcode/amd/cimx/sb800/LEGACY.c deleted file mode 100644 index ffd92028ca..0000000000 --- a/src/vendorcode/amd/cimx/sb800/LEGACY.c +++ /dev/null @@ -1,37 +0,0 @@ -/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-#include "SBPLATFORM.h"
-
-UINT32
-GetFixUp (
- OUT VOID
- )
-{
- AMD_CONFIG_PARAMS* Result;
- Result = (AMD_CONFIG_PARAMS*) getConfigPointer ();
- if ( Result->ImageBasePtr > 0x100000 && Result->ImageBasePtr < 0xFF000000 ) {
- return 0;
- }
- return Result->ImageBasePtr;
-}
diff --git a/src/vendorcode/amd/cimx/sb800/MEMLIB.c b/src/vendorcode/amd/cimx/sb800/MEMLIB.c deleted file mode 100644 index 5c3db7612d..0000000000 --- a/src/vendorcode/amd/cimx/sb800/MEMLIB.c +++ /dev/null @@ -1,86 +0,0 @@ -/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-#include "SBPLATFORM.h"
-
-VOID
-ReadMEM (
- IN UINT32 Address,
- IN UINT8 OpFlag,
- IN VOID* Value
- )
-{
- OpFlag = OpFlag & 0x7f;
- switch ( OpFlag ) {
- case AccWidthUint8:
- *((UINT8*)Value) = *((UINT8*) ((UINTN)Address));
- break;
- case AccWidthUint16:
- //*((UINT16*)Value) = *((UINT16*) ((UINTN)Address)); //gcc break strict-aliasing rules
- *((UINT8*)Value) = *((UINT8*) ((UINTN)Address));
- *((UINT8*)Value + 1) = *((UINT8*)((UINTN)Address) + 1);
- break;
- case AccWidthUint32:
- *((UINT32*)Value) = *((UINT32*) ((UINTN)Address));
- break;
- }
-}
-
-VOID
-WriteMEM (
- IN UINT32 Address,
- IN UINT8 OpFlag,
- IN VOID* Value
- )
-{
- OpFlag = OpFlag & 0x7f;
- switch ( OpFlag ) {
- case AccWidthUint8 :
- *((UINT8*) ((UINTN)Address)) = *((UINT8*)Value);
- break;
- case AccWidthUint16:
- //*((UINT16*) ((UINTN)Address)) = *((UINT16*)Value); //gcc break strict-aliasing rules
- *((UINT8*)((UINTN)Address)) = *((UINT8*)Value);
- *((UINT8*)((UINTN)Address) + 1) = *((UINT8*)Value + 1);
- break;
- case AccWidthUint32:
- *((UINT32*) ((UINTN)Address)) = *((UINT32*)Value);
- break;
- }
-}
-
-VOID
-RWMEM (
- IN UINT32 Address,
- IN UINT8 OpFlag,
- IN UINT32 Mask,
- IN UINT32 Data
- )
-{
- UINT32 Result;
- ReadMEM (Address, OpFlag, &Result);
- Result = (Result & Mask) | Data;
- WriteMEM (Address, OpFlag, &Result);
-}
-
-
diff --git a/src/vendorcode/amd/cimx/sb800/Makefile.inc b/src/vendorcode/amd/cimx/sb800/Makefile.inc deleted file mode 100644 index 9dab1b0280..0000000000 --- a/src/vendorcode/amd/cimx/sb800/Makefile.inc +++ /dev/null @@ -1,86 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2010 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# - -# CIMX Root directory -CIMX_ROOT = src/vendorcode/amd/cimx - -CIMX_INC = -I$(src)/mainboard/$(MAINBOARDDIR) -CIMX_INC += -I$(src)/southbridge/amd/cimx_wrapper/sb800 -CIMX_INC += -I$(CIMX_ROOT)/sb800 -#TODO merge with agesa lib functions -CIMX_INC += -I$(CIMX_ROOT)/lib - -romstage-y += ACPILIB.c -romstage-y += AZALIA.c -romstage-y += DISPATCHER.c -romstage-y += ECfanc.c -romstage-y += ECfanLIB.c -romstage-y += GEC.c -romstage-y += Gpp.c -romstage-y += PMIO2LIB.c -romstage-y += SATA.c -romstage-y += SBCMN.c -romstage-y += SBMAIN.c -romstage-y += SBPOR.c -romstage-y += MEMLIB.c -romstage-y += PCILIB.c -romstage-y += IOLIB.c -romstage-y += PMIOLIB.c -romstage-y += AMDLIB.c -romstage-y += SBPELIB.c -romstage-y += AMDSBLIB.c -romstage-y += ECLIB.c -romstage-y += EC.c -romstage-y += SMM.c -romstage-y += USB.c - -ramstage-y += ACPILIB.c -ramstage-y += AZALIA.c -ramstage-y += DISPATCHER.c -ramstage-y += ECfanc.c -ramstage-y += ECfanLIB.c -ramstage-y += GEC.c -ramstage-y += Gpp.c -ramstage-y += PMIO2LIB.c -ramstage-y += SATA.c -ramstage-y += SBCMN.c -ramstage-y += SBMAIN.c -ramstage-y += SBPOR.c -ramstage-y += MEMLIB.c -ramstage-y += PCILIB.c -ramstage-y += IOLIB.c -ramstage-y += PMIOLIB.c -ramstage-y += AMDLIB.c -ramstage-y += SBPELIB.c -ramstage-y += AMDSBLIB.c -ramstage-y += ECLIB.c -ramstage-y += EC.c -ramstage-y += SMM.c -ramstage-y += USB.c -#ramstage-y += LEGACY.c -#ramstage-y += SbModInf.c - -CIMX_CFLAGS = -export CIMX_ROOT -export CIMX_INC -export CIMX_CFLAGS -CC := $(CC) $(CIMX_INC) - -####################################################################### - diff --git a/src/vendorcode/amd/cimx/sb800/OEM.h b/src/vendorcode/amd/cimx/sb800/OEM.h deleted file mode 100644 index 4fd459f23e..0000000000 --- a/src/vendorcode/amd/cimx/sb800/OEM.h +++ /dev/null @@ -1,274 +0,0 @@ -/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-#define BIOS_SIZE 0x04 //04 - 1MB
-#define LEGACY_FREE 0x00
-#define ACPI_SLEEP_TRAP 0x01
-//#define SPREAD_SPECTRUM_EPROM_LOAD 0x01
-
-/**
- * Module Specific Defines for platform BIOS
- *
- */
-
-/**
- * PCIEX_BASE_ADDRESS - Define PCIE base address
- *
- * @param[Option] MOVE_PCIEBAR_TO_F0000000 Set PCIe base address to 0xF7000000
- */
-#ifdef MOVE_PCIEBAR_TO_F0000000
- #define PCIEX_BASE_ADDRESS 0xF7000000
-#else
- #define PCIEX_BASE_ADDRESS 0xE0000000
-#endif
-
-/**
- * SMBUS0_BASE_ADDRESS - Smbus base address
- *
- */
-#ifndef SMBUS0_BASE_ADDRESS
- #define SMBUS0_BASE_ADDRESS 0xB00
-#endif
-
-/**
- * SMBUS1_BASE_ADDRESS - Smbus1 (ASF) base address
- *
- */
-#ifndef SMBUS1_BASE_ADDRESS
- #define SMBUS1_BASE_ADDRESS 0xB20
-#endif
-
-/**
- * GEC_BASE_ADDRESS - Gec Shadow ROM base address
- *
- */
-#ifndef GEC_BASE_ADDRESS
- #define GEC_BASE_ADDRESS 0xFED61000
-#endif
-
-
-/**
- * SIO_PME_BASE_ADDRESS - Super IO PME base address
- *
- */
-#ifndef SIO_PME_BASE_ADDRESS
- #define SIO_PME_BASE_ADDRESS 0xE00
-#endif
-
-/**
- * SPI_BASE_ADDRESS - SPI controller (ROM) base address
- *
- */
-#ifndef SPI_BASE_ADDRESS
- #define SPI_BASE_ADDRESS 0xFEC10000
-#endif
-
-/**
- * WATCHDOG_TIMER_BASE_ADDRESS - WATCHDOG timer base address
- *
- */
-#ifndef WATCHDOG_TIMER_BASE_ADDRESS
- #define WATCHDOG_TIMER_BASE_ADDRESS 0xFEC000F0 // Watchdog Timer Base Address
-#endif
-
-/**
- * HPET_BASE_ADDRESS - HPET base address
- *
- */
-#ifndef HPET_BASE_ADDRESS
- #define HPET_BASE_ADDRESS 0xFED00000 // HPET Base address
-#endif
-
-/**
- * ALT_ADDR_400 - For some BIOS codebases which use 0x400 as ACPI base address
- *
- */
-#ifdef ALT_ADDR_400
- #define ACPI_BLK_BASE 0x400
-#else
- #define ACPI_BLK_BASE 0x800
-#endif
-
-#define PM1_STATUS_OFFSET 0x00
-#define PM1_ENABLE_OFFSET 0x02
-#define PM1_CONTROL_OFFSET 0x04
-#define PM_TIMER_OFFSET 0x08
-#define CPU_CONTROL_OFFSET 0x10
-#define EVENT_STATUS_OFFSET 0x20
-#define EVENT_ENABLE_OFFSET 0x24
-
-/**
- * PM1_EVT_BLK_ADDRESS - ACPI power management Event Block base address
- *
- */
-#define PM1_EVT_BLK_ADDRESS ACPI_BLK_BASE + PM1_STATUS_OFFSET // AcpiPm1EvtBlkAddr
-
-/**
- * PM1_CNT_BLK_ADDRESS - ACPI power management Control block base address
- *
- */
-#define PM1_CNT_BLK_ADDRESS ACPI_BLK_BASE + PM1_CONTROL_OFFSET // AcpiPm1CntBlkAddr
-
-/**
- * PM1_TMR_BLK_ADDRESS - ACPI power management Timer block base address
- *
- */
-#define PM1_TMR_BLK_ADDRESS ACPI_BLK_BASE + PM_TIMER_OFFSET // AcpiPmTmrBlkAddr
-
-/**
- * CPU_CNT_BLK_ADDRESS - ACPI power management CPU Control block base address
- *
- */
-#define CPU_CNT_BLK_ADDRESS ACPI_BLK_BASE + CPU_CONTROL_OFFSET // CpuControlBlkAddr
-
-/**
- * GPE0_BLK_ADDRESS - ACPI power management General Purpose Event block base address
- *
- */
-#define GPE0_BLK_ADDRESS ACPI_BLK_BASE + EVENT_STATUS_OFFSET // AcpiGpe0BlkAddr
-
-/**
- * SMI_CMD_PORT - ACPI SMI Command block base address
- *
- */
-#define SMI_CMD_PORT 0xB0 // SmiCmdPortAddr
-
-/**
- * ACPI_PMA_CNT_BLK_ADDRESS - ACPI power management additional control block base address
- *
- */
-#define ACPI_PMA_CNT_BLK_ADDRESS 0xFE00 // AcpiPmaCntBlkAddr
-
-/**
- * SATA_IDE_MODE_SSID - Sata controller IDE mode SSID.
- * Define value for SSID while SATA controller set to IDE mode.
- */
-#ifndef SATA_IDE_MODE_SSID
- #define SATA_IDE_MODE_SSID 0x43901002
-#endif
-
-/**
- * SATA_RAID_MODE_SSID - Sata controller RAID mode SSID.
- * Define value for SSID while SATA controller set to RAID mode.
- */
-#ifndef SATA_RAID_MODE_SSID
- #define SATA_RAID_MODE_SSID 0x43921002
-#endif
-
-/**
- * SATA_RAID5_MODE_SSID - Sata controller RAID5 mode SSID.
- * Define value for SSID while SATA controller set to RAID5 mode.
- */
-#ifndef SATA_RAID5_MODE_SSID
- #define SATA_RAID5_MODE_SSID 0x43931002
-#endif
-
-/**
- * SATA_AHCI_MODE_SSID - Sata controller AHCI mode SSID.
- * Define value for SSID while SATA controller set to AHCI mode.
- */
-#ifndef SATA_AHCI_SSID
- #define SATA_AHCI_SSID 0x43911002
-#endif
-
-/**
- * OHCI_SSID - All SB OHCI controllers SSID value.
- *
- */
-#ifndef OHCI_SSID
- #define OHCI_SSID 0x43971002
-#endif
-
-/**
- * EHCI_SSID - All SB EHCI controllers SSID value.
- *
- */
-#ifndef EHCI_SSID
- #define EHCI_SSID 0x43961002
-#endif
-
-/**
- * OHCI4_SSID - OHCI (USB 1.1 mode *HW force) controllers SSID value.
- *
- */
-#ifndef OHCI4_SSID
- #define OHCI4_SSID 0x43991002
-#endif
-
-/**
- * SMBUS_SSID - Smbus controller (South Bridge device 0x14 function 0) SSID value.
- *
- */
-#ifndef SMBUS_SSID
- #define SMBUS_SSID 0x43851002
-#endif
-
-/**
- * IDE_SSID - SATA IDE controller (South Bridge device 0x14 function 1) SSID value.
- *
- */
-#ifndef IDE_SSID
- #define IDE_SSID 0x439C1002
-#endif
-
-/**
- * AZALIA_SSID - AZALIA controller (South Bridge device 0x14 function 2) SSID value.
- *
- */
-#ifndef AZALIA_SSID
- #define AZALIA_SSID 0x43831002
-#endif
-
-/**
- * LPC_SSID - LPC controller (South Bridge device 0x14 function 3) SSID value.
- *
- */
-#ifndef LPC_SSID
- #define LPC_SSID 0x439D1002
-#endif
-
-/**
- * PCIB_SSID - PCIB controller (South Bridge device 0x14 function 4) SSID value.
- *
- */
-#ifndef PCIB_SSID
- #define PCIB_SSID 0x43841002
-#endif
-
-/**
- * USB_PLL_Voltage - CG2 Clock voltage setting.
- *
- */
-#ifndef USB_PLL_Voltage
- #define USB_PLL_Voltage 0x10
-#endif
-
-/**
- * Spread_Spectrum_Type
- *
- * - 0 : Normal platform
- * - 1 : Ontario platform
- */
-#ifndef Spread_Spectrum_Type
- #define Spread_Spectrum_Type 0x00
-#endif
diff --git a/src/vendorcode/amd/cimx/sb800/PCILIB.c b/src/vendorcode/amd/cimx/sb800/PCILIB.c deleted file mode 100644 index c0611dc789..0000000000 --- a/src/vendorcode/amd/cimx/sb800/PCILIB.c +++ /dev/null @@ -1,76 +0,0 @@ -/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-
-#include "SBPLATFORM.h"
-
-VOID
-ReadPCI (
- IN UINT32 Address,
- IN UINT8 OpFlag,
- IN VOID* Value
- )
-{
- OpFlag = OpFlag & 0x7f;
-
- if ( (UINT16)Address < 0xff ) {
- //Normal Config Access
- UINT32 AddrCf8;
- AddrCf8 = (1 << 31) + ((Address >> 8) & 0x0FFFF00) + (Address & 0xFC);
- WriteIO (0xCf8, AccWidthUint32, &AddrCf8);
- ReadIO ((UINT16) (0xCfC + (Address & 0x3)), OpFlag, Value);
- }
-}
-
-VOID
-WritePCI (
- IN UINT32 Address,
- IN UINT8 OpFlag,
- IN VOID* Value
- )
-{
- OpFlag = OpFlag & 0x7f;
- if ( (UINT16)Address < 0xff ) {
- //Normal Config Access
- UINT32 AddrCf8;
- AddrCf8 = (1 << 31) + ((Address >> 8)&0x0FFFF00) + (Address & 0xFC);
- WriteIO (0xCf8, AccWidthUint32, &AddrCf8);
- WriteIO ((UINT16) (0xCfC + (Address & 0x3)), OpFlag, Value);
- }
-}
-
-VOID
-RWPCI (
- IN UINT32 Address,
- IN UINT8 OpFlag,
- IN UINT32 Mask,
- IN UINT32 Data
- )
-{
- UINT32 Result;
- Result = 0;
- OpFlag = OpFlag & 0x7f;
- ReadPCI (Address, OpFlag, &Result);
- Result = (Result & Mask) | Data;
- WritePCI (Address, OpFlag, &Result);
-}
diff --git a/src/vendorcode/amd/cimx/sb800/PMIO2LIB.c b/src/vendorcode/amd/cimx/sb800/PMIO2LIB.c deleted file mode 100644 index 8420a7c8c9..0000000000 --- a/src/vendorcode/amd/cimx/sb800/PMIO2LIB.c +++ /dev/null @@ -1,120 +0,0 @@ -/**
- * @file
- *
- * Southbridge PMIO2 access common routine
- *
- */
-/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-#include "SBPLATFORM.h"
-
-
-/*----------------------------------------------------------------------------------------*/
-/**
- * Read PMIO2
- *
- *
- *
- * @param[in] Address - PMIO2 Offset value
- * @param[in] OpFlag - Access sizes
- * @param[in] Value - Read Data Buffer
- *
- */
-VOID
-ReadPMIO2 (
- IN UINT8 Address,
- IN UINT8 OpFlag,
- IN VOID* Value
- )
-{
- UINT8 i;
- OpFlag = OpFlag & 0x7f;
-
- if ( OpFlag == 0x02 ) {
- OpFlag = 0x03;
- }
- for ( i = 0; i <= OpFlag; i++ ) {
- WriteIO (0xCD0, AccWidthUint8, &Address); // SB_IOMAP_REGCD0
- Address++;
- ReadIO (0xCD1, AccWidthUint8, (UINT8 *) Value + i); // SB_IOMAP_REGCD1
- }
-}
-
-/*----------------------------------------------------------------------------------------*/
-/**
- * Write PMIO 2
- *
- *
- *
- * @param[in] Address - PMIO2 Offset value
- * @param[in] OpFlag - Access sizes
- * @param[in] Value - Write Data Buffer
- *
- */
-VOID
-WritePMIO2 (
- IN UINT8 Address,
- IN UINT8 OpFlag,
- IN VOID* Value
- )
-{
- UINT8 i;
- OpFlag = OpFlag & 0x7f;
-
- if ( OpFlag == 0x02 ) {
- OpFlag = 0x03;
- }
- for ( i = 0; i <= OpFlag; i++ ) {
- WriteIO (0xCD0, AccWidthUint8, &Address); // SB_IOMAP_REGCD0
- Address++;
- WriteIO (0xCD1, AccWidthUint8, (UINT8 *)Value + i); // SB_IOMAP_REGCD1
- }
-}
-
-/*----------------------------------------------------------------------------------------*/
-/**
- * RWPMIO2 - Read/Write PMIO2
- *
- *
- *
- * @param[in] Address - PMIO2 Offset value
- * @param[in] OpFlag - Access sizes
- * @param[in] AndMask - Data And Mask 32 bits
- * @param[in] OrMask - Data OR Mask 32 bits
- *
- */
-VOID
-RWPMIO2 (
- IN UINT8 Address,
- IN UINT8 OpFlag,
- IN UINT32 AndMask,
- IN UINT32 OrMask
- )
-{
- UINT32 Result;
- OpFlag = OpFlag & 0x7f;
- ReadPMIO2 (Address, OpFlag, &Result);
- Result = (Result & AndMask) | OrMask;
- WritePMIO2 (Address, OpFlag, &Result);
-}
diff --git a/src/vendorcode/amd/cimx/sb800/PMIOLIB.c b/src/vendorcode/amd/cimx/sb800/PMIOLIB.c deleted file mode 100644 index 510552c286..0000000000 --- a/src/vendorcode/amd/cimx/sb800/PMIOLIB.c +++ /dev/null @@ -1,119 +0,0 @@ -/**
- * @file
- *
- * Southbridge PMIO access common routine
- *
- */
-/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-#include "SBPLATFORM.h"
-
-/*----------------------------------------------------------------------------------------*/
-/**
- * Read PMIO
- *
- *
- *
- * @param[in] Address - PMIO Offset value
- * @param[in] OpFlag - Access sizes
- * @param[in] Value - Read Data Buffer
- *
- */
-VOID
-ReadPMIO (
- IN UINT8 Address,
- IN UINT8 OpFlag,
- IN VOID* Value
- )
-{
- UINT8 i;
- OpFlag = OpFlag & 0x7f;
-
- if ( OpFlag == 0x02 ) {
- OpFlag = 0x03;
- }
- for ( i = 0; i <= OpFlag; i++ ) {
- WriteIO (0xCD6, AccWidthUint8, &Address); // SB_IOMAP_REGCD6
- Address++;
- ReadIO (0xCD7, AccWidthUint8, (UINT8 *)Value + i); // SB_IOMAP_REGCD7
- }
-}
-
-/*----------------------------------------------------------------------------------------*/
-/**
- * Write PMIO
- *
- *
- *
- * @param[in] Address - PMIO Offset value
- * @param[in] OpFlag - Access sizes
- * @param[in] Value - Write Data Buffer
- *
- */
-VOID
-WritePMIO (
- IN UINT8 Address,
- IN UINT8 OpFlag,
- IN VOID* Value
- )
-{
- UINT8 i;
- OpFlag = OpFlag & 0x7f;
-
- if ( OpFlag == 0x02 ) {
- OpFlag = 0x03;
- }
- for ( i = 0; i <= OpFlag; i++ ) {
- WriteIO (0xCD6, AccWidthUint8, &Address); // SB_IOMAP_REGCD6
- Address++;
- WriteIO (0xCD7, AccWidthUint8, (UINT8 *)Value + i); // SB_IOMAP_REGCD7
- }
-}
-
-/*----------------------------------------------------------------------------------------*/
-/**
- * RWPMIO - Read/Write PMIO
- *
- *
- *
- * @param[in] Address - PMIO Offset value
- * @param[in] OpFlag - Access sizes
- * @param[in] AndMask - Data And Mask 32 bits
- * @param[in] OrMask - Data OR Mask 32 bits
- *
- */
-VOID
-RWPMIO (
- IN UINT8 Address,
- IN UINT8 OpFlag,
- IN UINT32 AndMask,
- IN UINT32 OrMask
- )
-{
- UINT32 Result;
- OpFlag = OpFlag & 0x7f;
- ReadPMIO (Address, OpFlag, &Result);
- Result = (Result & AndMask) | OrMask;
- WritePMIO (Address, OpFlag, &Result);
-}
diff --git a/src/vendorcode/amd/cimx/sb800/SATA.c b/src/vendorcode/amd/cimx/sb800/SATA.c deleted file mode 100644 index bdb76274c3..0000000000 --- a/src/vendorcode/amd/cimx/sb800/SATA.c +++ /dev/null @@ -1,665 +0,0 @@ -
-/**
- * @file
- *
- * Config Southbridge SATA controller
- *
- * Init SATA features.
- *
- * @xrefitem bom "File Content Label" "Release Content"
- * @e project: CIMx-SB
- * @e sub-project:
- * @e \$Revision:$ @e \$Date:$
- *
- */
-/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-#include "SBPLATFORM.h"
-
-//
-// Declaration of local functions
-//
-VOID sataSetIrqIntResource (IN AMDSBCFG* pConfig);
-VOID sataBar5setting (IN AMDSBCFG* pConfig, IN UINT32 *pBar5);
-VOID shutdownUnconnectedSataPortClock (IN AMDSBCFG* pConfig, IN UINT32 ddBar5);
-VOID sataDriveDetection (IN AMDSBCFG* pConfig, IN UINT32 *pBar5);
-
-/**
- * sataSetIrqIntResource - Config SATA IRQ/INT# resource
- *
- *
- * - Private function
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-sataSetIrqIntResource (
- IN AMDSBCFG* pConfig
- )
-{
- UINT8 dbValue;
- // IRQ14/IRQ15 come from IDE or SATA
- dbValue = 0x08;
- WriteIO (SB_IOMAP_REGC00, AccWidthUint8, &dbValue);
- ReadIO (SB_IOMAP_REGC01, AccWidthUint8, &dbValue);
- dbValue = dbValue & 0x0F;
- if (pConfig->SataClass == 3) {
- dbValue = dbValue | 0x50;
- } else {
- if (pConfig->SataIdeMode == 1) {
- // Both IDE & SATA set to Native mode
- dbValue = dbValue | 0xF0;
- }
- }
- WriteIO (SB_IOMAP_REGC01, AccWidthUint8, &dbValue);
-}
-
-/**
- * sataBar5setting - Config SATA BAR5
- *
- * - Private function
- *
- * @param[in] pConfig - Southbridge configuration structure pointer.
- * @param[in] *pBar5 - SATA BAR5 buffer.
- *
- */
-VOID
-sataBar5setting (
- IN AMDSBCFG* pConfig,
- IN UINT32 *pBar5
- )
-{
- //Get BAR5 value
- ReadPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG24), AccWidthUint32, pBar5);
- //Assign temporary BAR if is not already assigned
- if ( (*pBar5 == 0) || (*pBar5 == - 1) ) {
- //assign temporary BAR5
- if ( (pConfig->TempMMIO == 0) || (pConfig->TempMMIO == - 1) ) {
- *pBar5 = 0xFEC01000;
- } else {
- *pBar5 = pConfig->TempMMIO;
- }
- WritePCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG24), AccWidthUint32, pBar5);
- }
- //Clear Bits 9:0
- *pBar5 = *pBar5 & 0xFFFFFC00;
-}
-/**
- * shutdownUnconnectedSataPortClock - Shutdown unconnected Sata port clock
- *
- * - Private function
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- * @param[in] ddBar5 Sata BAR5 base address.
- *
- */
-VOID
-shutdownUnconnectedSataPortClock (
- IN AMDSBCFG* pConfig,
- IN UINT32 ddBar5
- )
-{
- UINT8 dbPortNum;
- UINT8 dbPortSataStatus;
- UINT8 NumOfPorts;
- UINT8 cimSataClkAutoOff;
-
- cimSataClkAutoOff = (UINT8) pConfig->SataClkAutoOff;
-#if SB_CIMx_PARAMETER == 0
- cimSataClkAutoOff = cimSataClkAutoOffDefault;
-#endif
- NumOfPorts = 0;
- if ( cimSataClkAutoOff == TRUE ) {
- for ( dbPortNum = 0; dbPortNum < 6; dbPortNum++ ) {
- ReadMEM (ddBar5 + SB_SATA_BAR5_REG128 + (dbPortNum * 0x80), AccWidthUint8, &dbPortSataStatus);
- // Shutdown the clock for the port and do the necessary port reporting changes.
- // ?? Error port status should be 1 not 3
- if ( ((dbPortSataStatus & 0x0F) != 0x03) && (! ((pConfig->SataEspPort) & (1 << dbPortNum))) ) {
- RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 2), AccWidthUint8, 0xFF, (1 << dbPortNum));
- RWMEM (ddBar5 + SB_SATA_BAR5_REG0C, AccWidthUint8, ~(1 << dbPortNum), 00);
- }
- } //end of for (dbPortNum=0;dbPortNum<6;dbPortNum++)
- ReadMEM (ddBar5 + SB_SATA_BAR5_REG0C, AccWidthUint8, &dbPortSataStatus);
- //if all ports are in disabled state, report atleast one port
- if ( (dbPortSataStatus & 0x3F) == 0) {
- RWMEM (ddBar5 + SB_SATA_BAR5_REG0C, AccWidthUint8, (UINT32) ~(0x3F), 01);
- }
- ReadMEM (ddBar5 + SB_SATA_BAR5_REG0C, AccWidthUint8, &dbPortSataStatus);
- for (dbPortNum = 0; dbPortNum < 6; dbPortNum ++) {
- if (dbPortSataStatus & (1 << dbPortNum)) {
- NumOfPorts++;
- }
- }
- if ( NumOfPorts == 0) {
- NumOfPorts = 0x01;
- }
- RWMEM (ddBar5 + SB_SATA_BAR5_REG00, AccWidthUint8, 0xE0, NumOfPorts - 1);
- } //end of SataClkAuto Off option
-}
-
-/**
- * Table for class code of SATA Controller in different modes
- *
- *
- *
- *
- */
-const static UINT32 sataIfCodeTable[] =
-{
- 0x01018F40, //sata class ID of IDE
- 0x01040040, //sata class ID of RAID
- 0x01060140, //sata class ID of AHCI
- 0x01018A40, //sata class ID of Legacy IDE
- 0x01018F40, //sata class ID of IDE to AHCI mode
-};
-
-/**
- * Table for device id of SATA Controller in different modes
- *
- *
- *
- *
- */
-const static UINT16 sataDeviceIDTable[] =
-{
- 0x4390, //sata device ID of IDE
- 0x4392, //sata device ID of RAID
- 0x4391, //sata class ID of AHCI
- 0x4390, //sata device ID of Legacy IDE
- 0x4390, //sata device ID of IDE->AHCI mode
-};
-
-/**
- * Table for Sata Phy Fine Setting
- *
- *
- *
- *
- */
-const static SATAPHYSETTING sataPhyTable[] =
-{
- {0x3006, 0x0056A607},
- {0x2006, 0x00061400},
- {0x1006, 0x00061302},
-
- {0x3206, 0x0056A607},
- {0x2206, 0x00061400},
- {0x1206, 0x00061302},
-
- {0x3406, 0x0056A607},
- {0x2406, 0x00061402},
- {0x1406, 0x00064300},
-
- {0x3606, 0x0056A607},
- {0x2606, 0x00061402},
- {0x1606, 0x00064300},
-
- {0x3806, 0x0056A700},
- {0x2806, 0x00061502},
- {0x1806, 0x00064302},
-
- {0x3A06, 0x0056A700},
- {0x2A06, 0x00061502},
- {0x1A06, 0x00064302}
-};
-
-/**
- * sataInitBeforePciEnum - Config SATA controller before PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-sataInitBeforePciEnum (
- IN AMDSBCFG* pConfig
- )
-{
- UINT32 ddTempVar;
- UINT32 ddValue;
- UINT32 *tempptr;
- UINT16 *pDeviceIdptr;
- UINT32 dwDeviceId;
- UINT8 dbValue;
- UINT8 pValue;
- UINT16 i;
- SATAPHYSETTING *pPhyTable;
-
- ddTempVar = NULL;
- // BIT0 Enable write access to PCI header (reg 08h-0Bh) by setting SATA PCI register 40h
- // BIT4: Disable fast boot
- RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, 0xff, BIT0 + BIT2 + BIT4);
- // BIT0 Enable write access to PCI header (reg 08h-0Bh) by setting IDE PCI register 40h
- RWPCI (((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG40), AccWidthUint8 | S3_SAVE, 0xff, BIT0);
- RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 2), AccWidthUint8 | S3_SAVE, 0, pConfig->SataPortPower);
- dbValue = (UINT8)pConfig->SataClass;
- if (dbValue == AHCI_MODE_4394) {
- dbValue = AHCI_MODE;
- }
- if (dbValue == IDE_TO_AHCI_MODE_4394) {
- dbValue = IDE_TO_AHCI_MODE;
- }
- // Disable PATA MSI
- RWPCI (((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG34), AccWidthUint8 | S3_SAVE, 0x00, 0x00);
- RWPCI (((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG06), AccWidthUint8 | S3_SAVE, 0xEF, 0x00);
-
- // Get the appropriate class code from the table and write it to PCI register 08h-0Bh
- // Set the appropriate SATA class based on the input parameters
- // SATA IDE Controller Class ID & SSID
- tempptr = (UINT32 *) FIXUP_PTR (&sataIfCodeTable[0]);
- if ( (pConfig->SataIdeMode == 1) && (pConfig->SataClass != 3) ) {
- ddValue = tempptr[0];
- // Write the class code to IDE PCI register 08h-0Bh
- RWPCI (((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG08), AccWidthUint32 | S3_SAVE, 0, ddValue);
- }
- ddValue = tempptr[dbValue];
- // Write the class code to SATA PCI register 08h-0Bh
- RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG08), AccWidthUint32 | S3_SAVE, 0, ddValue);
- if ( pConfig->SataClass == LEGACY_IDE_MODE ) {
- //Set PATA controller to native mode
- RWPCI (((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG09), AccWidthUint8 | S3_SAVE, 0x00, 0x08F);
- }
- if (pConfig->BuildParameters.IdeSsid != NULL ) {
- RWPCI ((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pConfig->BuildParameters.IdeSsid);
- }
- // SATA Controller Class ID & SSID
- pDeviceIdptr = (UINT16 *) FIXUP_PTR (&sataDeviceIDTable[0]);
- if ( pConfig->BuildParameters.SataIDESsid != NULL ) {
- ddTempVar = pConfig->BuildParameters.SataIDESsid;
- }
- dwDeviceId = pDeviceIdptr[dbValue];
- if ( pConfig->SataClass == RAID_MODE) {
- if ( pConfig->BuildParameters.SataRAID5Ssid != NULL ) {
- ddTempVar = pConfig->BuildParameters.SataRAID5Ssid;
- }
- dwDeviceId = V_SB_SATA_RAID5_DID;
- pValue = SATA_EFUSE_LOCATION;
- getEfuseStatus (&pValue);
- if (( pValue & SATA_EFUSE_BIT ) || ( pConfig->SataForceRaid == 1 )) {
- dwDeviceId = V_SB_SATA_RAID_DID;
- if ( pConfig->BuildParameters.SataRAIDSsid != NULL ) {
- ddTempVar = pConfig->BuildParameters.SataRAIDSsid;
- }
- }
- }
- if ( ((pConfig->SataClass) == AHCI_MODE) || ((pConfig->SataClass) == IDE_TO_AHCI_MODE) ||
- ((pConfig->SataClass) == AHCI_MODE_4394) || ((pConfig->SataClass) == IDE_TO_AHCI_MODE_4394) ) {
- if ( pConfig->BuildParameters.SataAHCISsid != NULL ) {
- ddTempVar = pConfig->BuildParameters.SataAHCISsid;
- }
- }
- RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG02), AccWidthUint16 | S3_SAVE, 0, dwDeviceId);
- if ( ddTempVar != NULL ) {
- RWPCI ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG2C, AccWidthUint32 | S3_SAVE, 0x00, ddTempVar);
- }
- // SATA IRQ Resource
- sataSetIrqIntResource (pConfig);
-
- // 8.4 SATA PHY Programming Sequence
- pPhyTable = (SATAPHYSETTING*)FIXUP_PTR (&sataPhyTable[0]);
- for (i = 0; i < (sizeof (sataPhyTable) / sizeof (SATAPHYSETTING)); i++) {
- RWPCI ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG84, AccWidthUint16 | S3_SAVE, ~(BIT1 + BIT2 + BIT9 + BIT10 + BIT11 + BIT12 + BIT13 + BIT14), pPhyTable->wPhyCoreControl);
- RWPCI ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG94, AccWidthUint32 | S3_SAVE, 0x00, pPhyTable->dwPhyFineTune);
- ++pPhyTable;
- }
-
-// CallBackToOEM (SATA_PHY_PROGRAMMING, NULL, pConfig);
-
- RWPCI (((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG40), AccWidthUint8 | S3_SAVE, ~BIT0, 0);
- // Disable write access to PCI header
- RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, ~BIT0, 0);
-}
-
-/**
- * sataInitAfterPciEnum - Config SATA controller after PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-sataInitAfterPciEnum (
- IN AMDSBCFG* pConfig
- )
-{
- UINT32 ddAndMask;
- UINT32 ddOrMask;
- UINT32 ddBar5;
- UINT8 dbVar;
- UINT8 dbPortNum;
- UINT8 dbEfuse;
- UINT8 dbPortMode;
- UINT16 SataPortMode;
- UINT8 cimSataAggrLinkPmCap;
- UINT8 cimSataPortMultCap;
- UINT8 cimSataPscCap;
- UINT8 cimSataSscCap;
- UINT8 cimSataFisBasedSwitching;
- UINT8 cimSataCccSupport;
-
- cimSataAggrLinkPmCap = (UINT8) pConfig->SataAggrLinkPmCap;
- cimSataPortMultCap = (UINT8) pConfig->SataPortMultCap;
- cimSataPscCap = (UINT8) pConfig->SataPscCap;
- cimSataSscCap = (UINT8) pConfig->SataSscCap;
- cimSataFisBasedSwitching = (UINT8) pConfig->SataFisBasedSwitching;
- cimSataCccSupport = (UINT8) pConfig->SataCccSupport;
-
-#if SB_CIMx_PARAMETER == 0
- cimSataAggrLinkPmCap = cimSataAggrLinkPmCapDefault;
- cimSataPortMultCap = cimSataPortMultCapDefault;
- cimSataPscCap = cimSataPscCapDefault;
- cimSataSscCap = cimSataSscCapDefault;
- cimSataFisBasedSwitching = cimSataFisBasedSwitchingDefault;
- cimSataCccSupport = cimSataCccSupportDefault;
-#endif
-
- ddAndMask = 0;
- ddOrMask = 0;
- ddBar5 = 0;
- if ( pConfig->SATAMODE.SataMode.SataController == 0 ) {
- return; //return if SATA controller is disabled.
- }
-
- //Enable write access to pci header, pm capabilities
- RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, 0xFF, BIT0);
- //Disable AHCI Prefetch function
- RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 2), AccWidthUint8 | S3_SAVE, 0x7F, BIT7);
-
- sataBar5setting (pConfig, &ddBar5);
-
- ReadPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, &dbVar);
- RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8,0xFF, 0x03); //memory and io access enable
- dbEfuse = SATA_FIS_BASE_EFUSE_LOC;
- getEfuseStatus (&dbEfuse);
-
- if ( !cimSataPortMultCap ) {
- ddAndMask |= BIT12;
- }
- if ( cimSataAggrLinkPmCap ) {
- ddOrMask |= BIT11;
- } else {
- ddAndMask |= BIT11;
- }
- if ( cimSataPscCap ) {
- ddOrMask |= BIT1;
- }
- if ( cimSataSscCap ) {
- ddOrMask |= BIT26;
- }
- if ( cimSataFisBasedSwitching ) {
- if (dbEfuse & BIT1) {
- ddAndMask |= BIT10;
- } else {
- ddOrMask |= BIT10;
- }
- } else {
- ddAndMask |= BIT10;
- }
- // RPR 8.10 Disabling CCC (Command Completion Coalescing) support.
- if ( cimSataCccSupport ) {
- ddOrMask |= BIT19;
- } else {
- ddAndMask |= BIT19;
- }
- RWMEM ((ddBar5 + SB_SATA_BAR5_REGFC), AccWidthUint32 | S3_SAVE, ~ddAndMask, ddOrMask);
-
-
- // SATA ESP port setting
- // These config bits are set for SATA driver to identify which ports are external SATA ports and need to
- // support hotplug. If a port is set as an external SATA port and need to support hotplug, then driver will
- // not enable power management (HIPM & DIPM) for these ports.
- if ( pConfig->SataEspPort != 0 ) {
- RWMEM ((ddBar5 + SB_SATA_BAR5_REGF8), AccWidthUint32 | S3_SAVE, ~(pConfig->SataEspPort), 0);
- RWMEM ((ddBar5 + SB_SATA_BAR5_REGF8), AccWidthUint32 | S3_SAVE, ~(BIT12 + BIT13 + BIT14 + BIT15 + BIT16 + BIT17 + BIT5 + BIT4 + BIT3 + BIT2 + BIT1 + BIT0), (pConfig->SataEspPort << 12));
- // RPR 8.7 External SATA Port Indication Registers
- // If any of the ports was programmed as an external port, HCAP.SXS should also be set
- RWMEM ((ddBar5 + SB_SATA_BAR5_REGFC), AccWidthUint32 | S3_SAVE, ~(BIT20), BIT20);
- } else {
- // RPR 8.7 External SATA Port Indication Registers
- // If any of the ports was programmed as an external port, HCAP.SXS should also be set (Clear for no ESP port)
- RWMEM ((ddBar5 + SB_SATA_BAR5_REGF8), AccWidthUint32 | S3_SAVE, ~(BIT5 + BIT4 + BIT3 + BIT2 + BIT1 + BIT0), 0x00);
- RWMEM ((ddBar5 + SB_SATA_BAR5_REGFC), AccWidthUint32 | S3_SAVE, ~(BIT20), 0x00);
- }
- if ( cimSataFisBasedSwitching ) {
- if (dbEfuse & BIT1) {
- RWMEM ((ddBar5 + SB_SATA_BAR5_REGF8), AccWidthUint32 | S3_SAVE, ~(BIT22 + BIT23 + BIT24 + BIT25 + BIT26 + BIT27), 0x00);
- } else {
- RWMEM ((ddBar5 + SB_SATA_BAR5_REGF8), AccWidthUint32 | S3_SAVE, ~(BIT22 + BIT23 + BIT24 + BIT25 + BIT26 + BIT27), (BIT22 + BIT23 + BIT24 + BIT25 + BIT26 + BIT27));
- }
- } else {
- RWMEM ((ddBar5 + SB_SATA_BAR5_REGF8), AccWidthUint32 | S3_SAVE, ~(BIT22 + BIT23 + BIT24 + BIT25 + BIT26 + BIT27), 0x00);
- }
-
- // Disabled SATA MSI and D3 Power State capability
- // RPR 8.13 SATA MSI and D3 Power State Capability
- RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG34), AccWidthUint8 | S3_SAVE, 0, 0x70);
-
- if (((pConfig->SataClass) != NATIVE_IDE_MODE) && ((pConfig->SataClass) != LEGACY_IDE_MODE)) {
- // RIAD or AHCI
- if ((pConfig->SATAMODE.SataMode.SataIdeCombinedMode) == DISABLED) {
- RWMEM ((ddBar5 + SB_SATA_BAR5_REG00), AccWidthUint8 | S3_SAVE, ~(BIT2 + BIT1 + BIT0), BIT2 + BIT0);
- RWMEM ((ddBar5 + SB_SATA_BAR5_REG0C), AccWidthUint8 | S3_SAVE, 0xC0, 0x3F);
- // RPR 8.10 Disabling CCC (Command Completion Coalescing) support.
- // 8 messages
- RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG50 + 2), AccWidthUint8, ~(BIT3 + BIT2 + BIT1), BIT2 + BIT1);
- } else {
- // RPR 8.10 Disabling CCC (Command Completion Coalescing) support.
- if ( pConfig->SataCccSupport ) {
- // 8 messages
- RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG50 + 2), AccWidthUint8, ~(BIT3 + BIT2 + BIT1), BIT2 + BIT1);
- } else {
- // 4 messages
- RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG50 + 2), AccWidthUint8, ~(BIT3 + BIT2 + BIT1), BIT2);
- }
- }
- }
-
- if ( pConfig->BIOSOSHandoff == 1 ) {
- RWMEM ((ddBar5 + SB_SATA_BAR5_REG24), AccWidthUint8 | S3_SAVE, ~BIT0, BIT0);
- } else {
- RWMEM ((ddBar5 + SB_SATA_BAR5_REG24), AccWidthUint8 | S3_SAVE, ~BIT0, 0x00);
- }
-
- SataPortMode = (UINT16)pConfig->SataPortMode;
- dbPortNum = 0;
- while ( dbPortNum < 6 ) {
- dbPortMode = (UINT8) (SataPortMode & 3);
- if ( (dbPortMode == BIT0) || (dbPortMode == BIT1) ) {
- if ( dbPortMode == BIT0 ) {
- // set GEN 1
- RWMEM (ddBar5 + SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0x0F, 0x10);
- }
- if ( dbPortMode == BIT1 ) {
- // set GEN2 (default is GEN3)
- RWMEM (ddBar5 + SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0x0F, 0x20);
- }
- RWMEM (ddBar5 + SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0xFF, 0x01);
- }
- SataPortMode >>= 2;
- dbPortNum ++;
- }
- SbStall (1000);
- SataPortMode = (UINT16)pConfig->SataPortMode;
- dbPortNum = 0;
- while ( dbPortNum < 6 ) {
- dbPortMode = (UINT8) (SataPortMode & 3);
- if ( (dbPortMode == BIT0) || (dbPortMode == BIT1) ) {
- RWMEM (ddBar5 + SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0xFE, 0x00);
- }
- dbPortNum ++;
- SataPortMode >>= 2;
- }
- WritePCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, &dbVar);
- //Disable write access to pci header, pm capabilities
- RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, ~BIT0, 0);
-}
-
-
-/**
- * sataInitMidPost - Config SATA controller in Middle POST.
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-sataInitMidPost (
- IN AMDSBCFG* pConfig
- )
-{
- UINT32 ddBar5;
- sataBar5setting (pConfig, &ddBar5);
- //If this is not S3 resume and also if SATA set to one of IDE mode, them implement drive detection workaround.
- if ( ! (pConfig->S3Resume) && ( ((pConfig->SataClass) != AHCI_MODE) && ((pConfig->SataClass) != RAID_MODE) ) ) {
- sataDriveDetection (pConfig, &ddBar5);
- }
-}
-
-/**
- * sataDriveDetection - Sata drive detection
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- * @param[in] *pBar5 Sata BAR5 base address.
- *
- */
-VOID
-sataDriveDetection (
- IN AMDSBCFG* pConfig,
- IN UINT32 *pBar5
- )
-{
- UINT32 ddVar0;
- UINT8 dbPortNum;
- UINT8 dbVar0;
- UINT16 dwIoBase;
- UINT16 dwVar0;
- if ( (pConfig->SataClass == NATIVE_IDE_MODE) || (pConfig->SataClass == LEGACY_IDE_MODE) || (pConfig->SataClass == IDE_TO_AHCI_MODE) ) {
- for ( dbPortNum = 0; dbPortNum < 4; dbPortNum++ ) {
- ReadMEM (*pBar5 + SB_SATA_BAR5_REG128 + dbPortNum * 0x80, AccWidthUint32, &ddVar0);
- if ( ( ddVar0 & 0x0F ) == 0x03 ) {
- if ( dbPortNum & BIT0 ) {
- //this port belongs to secondary channel
- ReadPCI (((UINT32) (SATA_BUS_DEV_FUN << 16) + SB_SATA_REG18), AccWidthUint16, &dwIoBase);
- } else {
- //this port belongs to primary channel
- ReadPCI (((UINT32) (SATA_BUS_DEV_FUN << 16) + SB_SATA_REG10), AccWidthUint16, &dwIoBase);
- }
- //if legacy ide mode, then the bar registers don't contain the correct values. So we need to hardcode them
- if ( pConfig->SataClass == LEGACY_IDE_MODE ) {
- dwIoBase = ( (0x170) | ((UINT16) ( (~((UINT8) (dbPortNum & BIT0) << 7)) & 0x80 )) );
- }
- if ( dbPortNum & BIT1 ) {
- //this port is slave
- dbVar0 = 0xB0;
- } else {
- //this port is master
- dbVar0 = 0xA0;
- }
- dwIoBase &= 0xFFF8;
- WriteIO (dwIoBase + 6, AccWidthUint8, &dbVar0);
- //Wait in loop for 30s for the drive to become ready
- for ( dwVar0 = 0; dwVar0 < 300000; dwVar0++ ) {
- ReadIO (dwIoBase + 7, AccWidthUint8, &dbVar0);
- if ( (dbVar0 & 0x88) == 0 ) {
- break;
- }
- SbStall (100);
- }
- } //end of if ( ( ddVar0 & 0x0F ) == 0x03)
- } //for (dbPortNum = 0; dbPortNum < 4; dbPortNum++)
- } //if ( (pConfig->SataClass == NATIVE_IDE_MODE) || (pConfig->SataClass == LEGACY_IDE_MODE) || (pConfig->SataClass == IDE_TO_AHCI_MODE))
-}
-
-/**
- * sataInitLatePost - Prepare SATA controller to boot to OS.
- *
- * - Set class ID to AHCI (if set to AHCI * Mode)
- * - Enable AHCI interrupt
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-sataInitLatePost (
- IN AMDSBCFG* pConfig
- )
-{
- UINT32 ddBar5;
- UINT8 dbVar;
- UINT8 dbPortNum;
-
- //Return immediately is sata controller is not enabled
- if ( pConfig->SATAMODE.SataMode.SataController == 0 ) {
- return;
- }
- //Enable write access to pci header, pm capabilities
- RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, 0xff, BIT0);
-
-// if ((pConfig->SATAMODE.SataMode.SataIdeCombinedMode) == DISABLED) {
- RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 1), AccWidthUint8 | S3_SAVE, ~BIT7, BIT7);
-// }
- sataBar5setting (pConfig, &ddBar5);
-
- ReadPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, &dbVar);
- //Enable memory and io access
- RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, 0xFF, 0x03);
-
- shutdownUnconnectedSataPortClock (pConfig, ddBar5);
-
- if (( pConfig->SataClass == IDE_TO_AHCI_MODE) || ( pConfig->SataClass == IDE_TO_AHCI_MODE_4394 )) {
- //program the AHCI class code
- RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG08), AccWidthUint32 | S3_SAVE, 0, 0x01060100);
- //Set interrupt enable bit
- RWMEM ((ddBar5 + 0x04), AccWidthUint8, (UINT32)~0, BIT1);
- //program the correct device id for AHCI mode
- RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG02), AccWidthUint16 | S3_SAVE, 0, 0x4391);
- }
-
- if (( pConfig->SataClass == AHCI_MODE_4394 ) || ( pConfig->SataClass == IDE_TO_AHCI_MODE_4394 )) {
- //program the correct device id for AHCI 4394 mode
- RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG02), AccWidthUint16 | S3_SAVE, 0, 0x4394);
- }
-
- //Clear error status ?? only 4 port
- RWMEM ((ddBar5 + SB_SATA_BAR5_REG130), AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF);
- RWMEM ((ddBar5 + SB_SATA_BAR5_REG1B0), AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF);
- RWMEM ((ddBar5 + SB_SATA_BAR5_REG230), AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF);
- RWMEM ((ddBar5 + SB_SATA_BAR5_REG2B0), AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF);
- RWMEM ((ddBar5 + SB_SATA_BAR5_REG330), AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF);
- RWMEM ((ddBar5 + SB_SATA_BAR5_REG3B0), AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF);
- //Restore memory and io access bits
- WritePCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, &dbVar );
- //Disable write access to pci header and pm capabilities
- RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, ~BIT0, 0);
- for ( dbPortNum = 0; dbPortNum < 6; dbPortNum++ ) {
- RWMEM ((ddBar5 + 0x110 + (dbPortNum * 0x80)), AccWidthUint32, 0xFFFFFFFF, 0x00);
- }
-}
-
-
diff --git a/src/vendorcode/amd/cimx/sb800/SB800.h b/src/vendorcode/amd/cimx/sb800/SB800.h deleted file mode 100644 index 9f61aa28ad..0000000000 --- a/src/vendorcode/amd/cimx/sb800/SB800.h +++ /dev/null @@ -1,1893 +0,0 @@ -/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-#pragma pack (push, 1)
-
-#define CIMX_SB_REVISION "1.1.0.6"
-#define CIMX_SB_ID "SB80A13"
-#ifndef SBCIMx_Version
- #define SBCIMx_Version 0x1106
-#endif //CIMx_Version
-
-
-/*--------------------------- Documentation Pages ---------------------------*/
-/**
- * @page SB_POWERON_INIT_Page SB_POWERON_INIT
- * @section SB_POWERON_INIT Interface Call
- * Initialize structure referenced by AMDSBCFG to default recommended value.
- * @subsection SB_POWERON_INIT_CallIn Call Prototype
- * @par
- * sbPowerOnInit ((AMDSBCFG*) pConfig) (Followed PH Interface)
- * @subsection SB_BEFORE_PCI_INIT_CallID Service ID
- * @par
- * <TABLE border="0">
- * <TR><TD class="indexkey" width=380> SB_POWERON_INIT --> 0x00010001 </TD></TR>
- * </TABLE>
- * @subsection SB_POWERON_INIT_CallOut Prepare for Callout
- * @par
- * Not Applicable (Not necessary for the current implementation)
- * @subsection SB_POWERON_INIT_Config Prepare for Configuration Data.
- * @par
- * <TABLE border="0">
- * <TR><TD class="indexkey" width=380> BUILDPARAM::BiosSize </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::LegacyFree </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::EcKbd </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::Smbus0BaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::Smbus1BaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::SioPmeBaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::WatchDogTimerBase </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::GecShadowRomBase </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::SpiRomBaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::AcpiPm1EvtBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::AcpiPm1CntBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::AcpiPmTmrBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::CpuControlBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::AcpiGpe0BlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::SmiCmdPortAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::AcpiPmaCntBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> SATAST::SataController </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> SATAST::SataIdeCombinedMode </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * </TABLE>
- *
- */
-#define SB_POWERON_INIT 0x00010001
-#define OUTDEBUG_PORT 0x00010002
-/*--------------------------- Documentation Pages ---------------------------*/
-/**
- * @page SB_BEFORE_PCI_INIT_Page SB_BEFORE_PCI_INIT
- * @section SB_BEFORE_PCI_INIT Interface Call
- * Initialize structure referenced by AMDSBCFG to default recommended value.
- * @subsection SB_BEFORE_PCI_INIT_CallIn Call Prototype
- * @par
- * sbBeforePciInit ((AMDSBCFG*)pConfig) (Followed PH Interface)
- * @subsection SB_BEFORE_PCI_INIT_CallID Service ID
- * @par
- * <TABLE border="0">
- * <TR><TD class="indexkey" width=380> SB_BEFORE_PCI_INIT --> 0x00010010 </TD></TR>
- * </TABLE>
- * @subsection SB_BEFORE_PCI_INIT_CallOut Prepare for Callout
- * @par
- * <TABLE border="0">
- * <TR><TD class="indexkey" width=380> @ref CB_SBGPP_RESET_ASSERT_Page "CB_SBGPP_RESET_ASSERT"</TD></TR>
- * <TR><TD class="indexkey" width=380> @ref CB_SBGPP_RESET_DEASSERT_Page "CB_SBGPP_RESET_DEASSERT"</TD></TR>
- * </TABLE>
- * @subsection SB_BEFORE_PCI_INIT_Config Prepare for Configuration Data.
- * @par
- * <TABLE border="0">
- * <TR><TD class="indexkey" width=380> SATAST::SataController </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> SATAST::SataIdeCombinedMode </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> AMDSBCFG::SataClass </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> AMDSBCFG::SataIdeMode </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> AMDSBCFG::USBDeviceConfig </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> AMDSBCFG::GecConfig </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> AMDSBCFG::AzaliaController </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> AMDSBCFG::PciClks </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::SataIDESsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::SataRAID5Ssid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::SataRAIDSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::SataAHCISsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::SmbusSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::LpcSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::PCIBSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
- * </TABLE>
- *
- */
-#define SB_BEFORE_PCI_INIT 0x00010010
-/*--------------------------- Documentation Pages ---------------------------*/
-/**
- * @page SB_AFTER_PCI_INIT_Page SB_AFTER_PCI_INIT
- * @section SB_AFTER_PCI_INIT Interface Call
- * Initialize structure referenced by AMDSBCFG to default recommended value.
- * @subsection SB_AFTER_PCI_INIT_CallIn Call Prototype
- * @par
- * sbAfterPciInit ((AMDSBCFG*)pConfig) (Followed PH Interface)
- * @subsection SB_AFTER_PCI_INIT_CallID Service ID
- * @par
- * <TABLE border="0">
- * <TR><TD class="indexkey" width=380> SB_AFTER_PCI_INIT --> 0x00010020 </TD></TR>
- * </TABLE>
- * @subsection SB_AFTER_PCI_INIT_CallOut Prepare for Callout
- * @par
- * Not Applicable (Not necessary for the current implementation)
- * @subsection SB_AFTER_PCI_INIT_Config Prepare for Configuration Data.
- * @par
- * <TABLE border="0">
- * <TR><TD class="indexkey" width=380> SATAST::SataController </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> SATAST::SataIdeCombinedMode </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> AMDSBCFG::SataClass </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> AMDSBCFG::SataEspPort </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> AMDSBCFG::AzaliaController </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> AMDSBCFG::AzaliaPinCfg </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> AMDSBCFG::AzaliaSdinPin </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::OhciSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::Ohci4Ssid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::EhciSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::AzaliaSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
- * </TABLE>
- *
- */
-#define SB_AFTER_PCI_INIT 0x00010020
-/*--------------------------- Documentation Pages ---------------------------*/
-/**
- * @page SB_MID_POST_INIT_Page SB_MID_POST_INIT
- * @section SB_MID_POST_INIT Interface Call
- * Initialize structure referenced by AMDSBCFG to default recommended value.
- * @subsection SB_MID_POST_INIT_CallIn Call Prototype
- * @par
- * sbMidPostInit ((AMDSBCFG*)pConfig) (Followed PH Interface)
- * @subsection SB_MID_POST_INIT_CallID Service ID
- * @par
- * <TABLE border="0">
- * <TR><TD class="indexkey" width=380> SB_MID_POST_INIT --> 0x00010021 </TD></TR>
- * </TABLE>
- * @subsection SB_MID_POST_INIT_CallOut Prepare for Callout
- * @par
- * Not Applicable (Not necessary for the current implementation)
- * @subsection SB_MID_POST_INIT_Config Prepare for Configuration Data.
- * @par
- * <TABLE border="0">
- * <TR><TD class="indexkey" width=380> SATAST::SataController </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> AMDSBCFG::SataClass </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * </TABLE>
- *
- */
-#define SB_MID_POST_INIT 0x00010021
-/*--------------------------- Documentation Pages ---------------------------*/
-/**
- * @page SB_LATE_POST_INIT_Page SB_LATE_POST_INIT
- * @section SB_LATE_POST_INIT Interface Call
- * Initialize structure referenced by AMDSBCFG to default recommended value.
- * @subsection SB_LATE_POST_INIT_CallIn Call Prototype
- * @par
- * sbLatePost ((AMDSBCFG*)pConfig) (Followed PH Interface)
- * @subsection SB_LATE_POST_INIT_CallID Service ID
- * @par
- * <TABLE border="0">
- * <TR><TD class="indexkey" width=380> SB_LATE_POST_INIT --> 0x00010030 </TD></TR>
- * </TABLE>
- * @subsection SB_LATE_POST_INIT_CallOut Prepare for Callout
- * @par
- * Not Applicable (Not necessary for the current implementation)
- * @subsection SB_LATE_POST_INIT_Config Prepare for Configuration Data.
- * @par
- * <TABLE border="0">
- * <TR><TD class="indexkey" width=380> SATAST::SataController </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> SATAST::SataIdeCombinedMode </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> AMDSBCFG::SataClass </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * </TABLE>
- *
- */
-#define SB_LATE_POST_INIT 0x00010030
-/*--------------------------- Documentation Pages ---------------------------*/
-/**
- * @page SB_BEFORE_PCI_RESTORE_INIT_Page SB_BEFORE_PCI_RESTORE_INIT
- * @section SB_BEFORE_PCI_RESTORE_INIT Interface Call
- * Initialize structure referenced by AMDSBCFG to default recommended value.
- * @subsection SB_BEFORE_PCI_RESTORE_INIT_CallIn Call Prototype
- * @par
- * sbBeforePciRestoreInit ((AMDSBCFG*)pConfig) (Followed PH Interface)
- * @subsection SB_BEFORE_PCI_RESTORE_INIT_CallID Service ID
- * @par
- * <TABLE border="0">
- * <TR><TD class="indexkey" width=380> SB_BEFORE_PCI_RESTORE_INIT --> 0x00010040 </TD></TR>
- * </TABLE>
- * @subsection SB_BEFORE_PCI_RESTORE_INIT_CallOut Prepare for Callout
- * @par
- * <TABLE border="0">
- * <TR><TD class="indexkey" width=380> @ref CB_SBGPP_RESET_ASSERT_Page "CB_SBGPP_RESET_ASSERT"</TD></TR>
- * <TR><TD class="indexkey" width=380> @ref CB_SBGPP_RESET_DEASSERT_Page "CB_SBGPP_RESET_DEASSERT"</TD></TR>
- * </TABLE>
- * @subsection SB_BEFORE_PCI_RESTORE_INIT_Config Prepare for Configuration Data.
- * @par
- * <TABLE border="0">
- * <TR><TD class="indexkey" width=380> SATAST::SataController </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> SATAST::SataIdeCombinedMode </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> AMDSBCFG::SataClass </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> AMDSBCFG::SataIdeMode </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> AMDSBCFG::USBDeviceConfig </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> AMDSBCFG::GecConfig </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> AMDSBCFG::AzaliaController </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> AMDSBCFG::PciClks </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::SataIDESsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::SataRAID5Ssid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::SataRAIDSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::SataAHCISsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::SmbusSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::LpcSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::PCIBSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
- * </TABLE>
- *
- */
-#define SB_BEFORE_PCI_RESTORE_INIT 0x00010040
-/*--------------------------- Documentation Pages ---------------------------*/
-/**
- * @page SB_AFTER_PCI_RESTORE_INIT_Page SB_AFTER_PCI_RESTORE_INIT
- * @section SB_AFTER_PCI_RESTORE_INIT Interface Call
- * Initialize structure referenced by AMDSBCFG to default recommended value.
- * @subsection SB_AFTER_PCI_RESTORE_INIT_CallIn Call Prototype
- * @par
- * sbAfterPciRestoreInit ((AMDSBCFG*)pConfig) (Followed PH Interface)
- * @subsection SB_AFTER_PCI_RESTORE_INIT_CallID Service ID
- * @par
- * <TABLE border="0">
- * <TR><TD class="indexkey" width=380> SB_AFTER_PCI_RESTORE_INIT --> 0x00010050 </TD></TR>
- * </TABLE>
- * @subsection SB_AFTER_PCI_RESTORE_INIT_CallOut Prepare for Callout
- * @par
- * Not Applicable (Not necessary for the current implementation)
- * @subsection SB_AFTER_PCI_RESTORE_INIT_Config Prepare for Configuration Data.
- * @par
- * <TABLE border="0">
- * <TR><TD class="indexkey" width=380> SATAST::SataController </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> SATAST::SataIdeCombinedMode </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> AMDSBCFG::SataClass </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> AMDSBCFG::SataEspPort </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> AMDSBCFG::AzaliaController </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> AMDSBCFG::AzaliaPinCfg </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> AMDSBCFG::AzaliaSdinPin </TD><TD class="indexvalue"><B>Required </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::OhciSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::Ohci4Ssid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::EhciSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
- * <TR><TD class="indexkey" width=380> BUILDPARAM::AzaliaSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
- * </TABLE>
- *
- */
-#define SB_AFTER_PCI_RESTORE_INIT 0x00010050
-/*--------------------------- Documentation Pages ---------------------------*/
-/**
- * @page SB_SMM_SERVICE_Page SB_SMM_SERVICE
- * @section SB_SMM_SERVICE Interface Call
- * Initialize structure referenced by AMDSBCFG to default recommended value.
- * @subsection SB_SMM_SERVICE_CallIn Call Prototype
- * @par
- * sbSmmService ((AMDSBCFG*)pConfig) (Followed PH Interface)
- * @subsection SB_SMM_SERVICE_CallID Service ID
- * @par
- * <TABLE border="0">
- * <TR><TD class="indexkey" width=380> SB_SMM_SERVICE --> 0x00010060 </TD></TR>
- * </TABLE>
- * @subsection SB_SMM_SERVICE_CallOut Prepare for Callout
- * @par
- * Not Applicable (Not necessary for the current implementation)
- * @subsection SB_SMM_SERVICE_Config Prepare for Configuration Data.
- * @par
- * Not necessary on current implementation
- *
- */
-#define SB_SMM_SERVICE 0x00010060
-/*--------------------------- Documentation Pages ---------------------------*/
-/**
- * @page SB_SMM_ACPION_Page SB_SMM_ACPION
- * @section SB_SMM_ACPION Interface Call
- * Initialize structure referenced by AMDSBCFG to default recommended value.
- * @subsection SB_SMM_ACPION_CallIn Call Prototype
- * @par
- * sbSmmAcpiOn ((AMDSBCFG*)pConfig) (Followed PH Interface)
- * @subsection SB_SMM_ACPION_CallID Service ID
- * @par
- * <TABLE border="0">
- * <TR><TD class="indexkey" width=380> SB_SMM_ACPION --> 0x00010061 </TD></TR>
- * </TABLE>
- * @subsection SB_SMM_ACPION_CallOut Prepare for Callout
- * @par
- * Not Applicable (Not necessary for the current implementation)
- * @subsection SB_SMM_ACPION_Config Prepare for Configuration Data.
- * @par
- * Not necessary on current implementation
- *
- */
-#define SB_SMM_ACPION 0x00010061
-#define SB_EC_FANCONTROL 0x00010070
-
-#ifndef OEM_CALLBACK_BASE
- #define OEM_CALLBACK_BASE 0x00010100
-#endif
-
-//0x00 - 0x0F callback functions are reserved for bootblock
-#define SATA_PHY_PROGRAMMING OEM_CALLBACK_BASE + 0x10
-#define PULL_UP_PULL_DOWN_SETTINGS OEM_CALLBACK_BASE + 0x20
-/*--------------------------- Documentation Pages ---------------------------*/
-/**
- * @page CB_SBGPP_RESET_ASSERT_Page CB_SBGPP_RESET_ASSERT
- * @section CB_SBGPP_RESET_ASSERT Interface Call
- * Initialize structure referenced by AMDSBCFG to default recommended value.
- * @subsection CB_SBGPP_RESET_ASSERT_CallID Service ID
- * @par
- * <TABLE border="0">
- * <TR><TD class="indexkey" width=380> CB_SBGPP_RESET_ASSERT --> 0x00010130 </TD></TR>
- * </TABLE>
- * @subsection CB_SBGPP_RESET_ASSERT_Config Prepare for Configuration Data.
- * @par
- * Not necessary on current implementation
- *
- */
-#define CB_SBGPP_RESET_ASSERT OEM_CALLBACK_BASE + 0x30
-/*--------------------------- Documentation Pages ---------------------------*/
-/**
- * @page CB_SBGPP_RESET_DEASSERT_Page CB_SBGPP_RESET_DEASSERT
- * @section CB_SBGPP_RESET_DEASSERT Interface Call
- * Initialize structure referenced by AMDSBCFG to default recommended value.
- * @subsection CB_SBGPP_RESET_DEASSERT _CallID Service ID
- * @par
- * <TABLE border="0">
- * <TR><TD class="indexkey" width=380> CB_SBGPP_RESET_DEASSERT --> 0x00010131 </TD></TR>
- * </TABLE>
- * @subsection CB_SBGPP_RESET_DEASSERT _Config Prepare for Configuration Data.
- * @par
- * Not necessary on current implementation
- *
- */
-#define CB_SBGPP_RESET_DEASSERT OEM_CALLBACK_BASE + 0x31
-
-#define IMC_FIRMWARE_FAIL OEM_CALLBACK_BASE + 0x40
-
-#define CFG_ADDR_PORT 0xCF8
-#define CFG_DATA_PORT 0xCFC
-
-#define ALINK_ACCESS_INDEX 0x0CD8
-#define ALINK_ACCESS_DATA ALINK_ACCESS_INDEX + 4
-
-/*------------------------------------------------------------------
-; I/O Base Address - Should be set by host BIOS
-;------------------------------------------------------------------ */
-#define DELAY_PORT 0x0E0
-
-/*------------------------------------------------------------------
-; Fuse ID and minor ID of efuse bits
-;------------------------------------------------------------------ */
-#define FUSE_ID_EFUSE_LOC 0x1F // efuse bits 248-255
-#define MINOR_ID_EFUSE_LOC 0x1E // efuse bits 240-247
-#define M1_D1_FUSE_ID 0x70
-#define M1_MINOR_ID 0x02
-
-/*------------------------------------------------------------------
-; DEBUG_PORT = 8-bit I/O Port Address for POST Code Display
-;------------------------------------------------------------------ */
-// ASIC VendorID and DeviceIDs
-#define AMD_SB_VID 0x1002
-#define SB_DEVICE_ID 0x4385 /* AMD ER SB800 */
-#define V_SB_SATA_VID AMD_SB_VID // dev 17 Func 0
-#define V_SB_SATA_DID 0x4390
-#define V_SB_SATA_AHCI_DID 0x4391
-#define V_SB_SATA_RAID_DID 0x4392
-#define V_SB_SATA_RAID5_DID 0x4393
-#define V_SB_USB_OHCI_VID AMD_SB_VID // dev 18 Func 0, dev 19 Func 0, dev 22 Func 0
-#define V_SB_USB_OHCI_DID 0x4397
-#define V_SB_USB_EHCI_VID AMD_SB_VID // dev 18 Func 2, dev 19 Func 2, dev 22 Func 2
-#define V_SB_USB_EHCI_DID 0x4396
-#define V_SB_SMBUS_VID AMD_SB_VID // dev 20 Func 0
-#define V_SB_SMBUS_DID 0x4385
-#define V_SB_IDE_VID AMD_SB_VID // dev 20 Func 1
-#define V_SB_IDE_DID 0x439C
-#define V_SB_AZALIA_VID AMD_SB_VID // dev 20 Func 2
-#define V_SB_AZALIA_DID 0x4383
-#define V_SB_LPC_VID AMD_SB_VID // dev 20 Func 3
-#define V_SB_LPC_DID 0x439D
-#define V_SB_PCIB_VID AMD_SB_VID // dev 20 Func 4
-#define V_SB_PCIB_DID 0x4384
-#define V_SB_USB_OHCIF_VID AMD_SB_VID // dev 20 Func 5
-#define V_SB_USB_OHCIF_DID 0x4399
-#define V_SB_NIC_VID 0x14E4 // dev 20 Func 6
-#define V_SB_NIC_DID 0x1699
-
-//Misc
-#define ACPI_SMI_CMD_PORT 0xB0
-#define ACPI_SMI_DATA_PORT 0xB1
-#define R_SB_ACPI_PM1_STATUS 0x00
-#define R_SB_ACPI_PM1_ENABLE 0x02
-#define R_SB_ACPI_PM_CONTROL 0x04
-#define R_SB_ACPI_EVENT_STATUS 0x20
-#define R_SB_ACPI_EVENT_ENABLE 0x24
-#define R_SB_PM_ACPI_PMA_CNT_BLK_LO 0x2C
-
-#define SATA_BUS_DEV_FUN ((0x11 << 3) + 0)
-#define SB_SATA1_BUS 0
-#define SB_SATA1_DEV 17
-#define SB_SATA1_FUNC 0
-
-#define FC_BUS_DEV_FUN ((0x11 << 3) + 1)
-#define USB1_OHCI_BUS_DEV_FUN ((0x12 << 3) + 0) // PORT 0-4
-#define SB_OHCI1_BUS 0
-#define SB_OHCI1_DEV 18
-#define SB_OHCI1_FUNC 0
-#define USB2_OHCI_BUS_DEV_FUN ((0x13 << 3) + 0) // PORT 5-9
-#define SB_OHCI2_BUS 0
-#define SB_OHCI2_DEV 19
-#define SB_OHCI2_FUNC 0
-#define USB3_OHCI_BUS_DEV_FUN ((0x16 << 3) + 0) // PORT 10-13
-#define SB_OHCI3_BUS 0
-#define SB_OHCI3_DEV 22
-#define SB_OHCI3_FUNC 0
-#define USB1_EHCI_BUS_DEV_FUN ((0x12 << 3) + 2) // PORT 0-4
-#define SB_EHCI1_BUS 0
-#define SB_EHCI1_DEV 18
-#define SB_EHCI1_FUNC 2
-#define USB2_EHCI_BUS_DEV_FUN ((0x13 << 3) + 2) // PORT 5-9
-#define SB_EHCI2_BUS 0
-#define SB_EHCI2_DEV 19
-#define SB_EHCI2_FUNC 2
-#define USB3_EHCI_BUS_DEV_FUN ((0x16 << 3) + 2) // PORT 10-13
-#define SB_EHCI3_BUS 0
-#define SB_EHCI3_DEV 22
-#define SB_EHCI3_FUNC 2
-
-#define SMBUS_BUS_DEV_FUN ((0x14 << 3) + 0)
-#define SB_ISA_BUS 0
-#define SB_ISA_DEV 20
-#define SB_ISA_FUNC 0
-#define IDE_BUS_DEV_FUN ((0x14 << 3) + 1)
-#define SB_IDE_BUS 0
-#define SB_IDE_DEV 20
-#define SB_IDE_FUNC 1
-#define AZALIA_BUS_DEV_FUN ((0x14 << 3) + 2)
-#define SB_AZALIA_BUS 0
-#define SB_AZALIA_DEV 20
-#define SB_AZALIA_FUNC 2
-#define LPC_BUS_DEV_FUN ((0x14 << 3) + 3)
-#define SB_LPC_BUS 0
-#define SB_LPC_DEV 20
-#define SB_LPC_FUNC 3
-#define PCIB_BUS_DEV_FUN ((0x14 << 3) + 4) // P2P in SB700
-#define SB_PCI_BUS 0
-#define SB_PCI_DEV 20
-#define SB_PCI_FUNC 4
-#define USB4_OHCI_BUS_DEV_FUN ((0x14 << 3) + 5) // PORT FL0 - FL1
-#define SB_OHCI4_BUS 0
-#define SB_OHCI4_DEV 20
-#define SB_OHCI4_FUNC 5
-//Gigabyte Ethernet Controller
-#define GEC_BUS_DEV_FUN ((0x14 << 3) + 6)
-#define SB_GBEC_BUS 0
-#define SB_GBEC_DEV 20
-#define SB_GBEC_FUNC 6
-
-#define SB_GPP_BUS 0
-#define SB_GPP_DEV 21
-#define SB_GPP_FUNC 0
-#define GPP0_BUS_DEV_FUN ((0x15 << 3) + 0) // GPP P2P bridge PORT0
-#define GPP1_BUS_DEV_FUN ((0x15 << 3) + 1) // GPP P2P bridge PORT1
-#define GPP2_BUS_DEV_FUN ((0x15 << 3) + 2) // GPP P2P bridge PORT2
-#define GPP3_BUS_DEV_FUN ((0x15 << 3) + 3) // GPP P2P bridge PORT3
-
-#define ACPI_MMIO_BASE 0xFED80000
-#define SB_CFG_BASE 0x000 // DWORD
-#define GPIO_BASE 0x100 // BYTE
-#define SMI_BASE 0x200 // DWORD
-#define PMIO_BASE 0x300 // DWORD
-#define PMIO2_BASE 0x400 // BYTE
-#define BIOS_RAM_BASE 0x500 // BYTE
-#define CMOS_RAM_BASE 0x600 // BYTE
-#define CMOS_BASE 0x700 // BYTE
-#define ASF_BASE 0x900 // DWORD
-#define SMBUS_BASE 0xA00 // DWORD
-#define WATCHDOG_BASE 0xB00 // ??
-#define HPET_BASE 0xC00 // DWORD
-#define IOMUX_BASE 0xD00 // BYTE
-#define MISC_BASE 0xE00
-
-#define GPP_EFUSE_LOCATION 0x14 // bit 160
-#define GPP_GEN2_EFUSE_BIT BIT0
-
-// RegSpace field (AB_INDEX[31:29]
-#define AXINDC 0 // AXINDC
-#define AXINDP 2 // AXINDP
-#define ABCFG 6 // ABCFG
-#define AXCFG 4 // AXCFG
-#define RCINDXC 1 // PCIEIND
-#define RCINDXP 3 // PCIEIND_P
-
-#define SBTEMP_BUS 8
-#define GPP_DEV_NUM 21 //?? Code style different
-#define MAX_GPP_PORTS 4
-#ifndef TRUE
- #define TRUE 1
-#endif
-#ifndef FALSE
- #define FALSE 0
-#endif
-//
-// ABCFG Registers
-//
-#define SB_ABCFG_REG00 0x00 // VENDOR ID
-#define SB_ABCFG_REG08 0x08 // REVISION ID
-#define SB_ABCFG_REG40 0x40 // BL_EVENTCNT0LO
-#define SB_ABCFG_REG44 0x44 // BL_EVENTCNT1LO
-#define SB_ABCFG_REG48 0x48 // BL_EVENTCNTSEL
-#define SB_ABCFG_REG4A 0x4A // BL_EVENTCNT0HI
-#define SB_ABCFG_REG4B 0x4B // BL_EVENTCNT1HI
-#define SB_ABCFG_REG4C 0x4C // BL_EVENTCNTCTL
-#define SB_ABCFG_REG50 0x50 // MISCCTL_50
-#define SB_ABCFG_REG54 0x54 // MISCCTL_54
-#define SB_ABCFG_REG58 0x58 // BL RAB CONTROL
-
-#define SB_ABCFG_REG60 0x60 // LINKWIDTH_CTL
-#define SB_ABCFG_REG64 0x64 // LINKWIDTH_UP_INTERVAL
-#define SB_ABCFG_REG68 0x68 // LINKWIDTH_DN_INVERVAL
-#define SB_ABCFG_REG6C 0x6C // LINKWIDTH_UPSTREAM_DWORDS
-#define SB_ABCFG_REG70 0x70 // LINKWIDTH_DOWNSTREAM_DWORDS
-#define SB_ABCFG_REG74 0x74 // LINKWIDTH_THRESHOLD_INCREASE
-#define SB_ABCFG_REG78 0x78 // LINKWIDTH_THRESHOLD_DECREASE
-
-#define SB_ABCFG_REG80 0x80 // BL DMA PREFETCH CONTROL
-#define SB_ABCFG_REG88 0x88 //
-#define SB_ABCFG_REG90 0x90 // BIF CONTROL 0
-#define SB_ABCFG_REG94 0x94 // MSI CONTROL
-#define SB_ABCFG_REG98 0x98 // BIF CONTROL 1
-#define SB_ABCFG_REG9C 0x9C // MISCCTL_9C
-#define SB_ABCFG_REGA0 0xA0 // BIF PHY CONTROL ENABLE
-#define SB_ABCFG_REGA4 0xA4 // BIF PHY CONTROL A4
-#define SB_ABCFG_REGA8 0xA8 // BIF PHY CONTROL A8
-#define SB_ABCFG_REGB0 0xB0 // HYPERFLASH-PCIE PORT MAPPING
-#define SB_ABCFG_REGC0 0xC0 // PCIE_GPP_ENABLE
-#define SB_ABCFG_REGC4 0xC4 // PCIE_P2P_INT_MAP
-#define SB_ABCFG_REGD0 0xD0 // MCTP_VDM_TX_FIFO_DATA
-#define SB_ABCFG_REGD4 0xD4 // MCTP_VMD_TX_CONTROL
-#define SB_ABCFG_REGE0 0xE0 // MCTP_VDM_RX_FIFO_DATA
-#define SB_ABCFG_REGE4 0xE4 // MCTP_VDM_RX_FIFO_STATUS
-#define SB_ABCFG_REGEC 0xEC // MCTP_VDM_CONTROL
-#define SB_ABCFG_REGF0 0xF0 // GPP_UPSTREAM_CONTROL
-#define SB_ABCFG_REGFC 0xFC // SB_TRAP_CONTROL
-#define SB_ABCFG_REG100 0x100 // SB_TRAP0_ADDRL
-#define SB_ABCFG_REG104 0x104 // SB_TRAP0_ADDRH
-#define SB_ABCFG_REG108 0x108 // SB_TRAP0_CMD
-#define SB_ABCFG_REG10C 0x10C // SB_TRAP1_DATA
-#define SB_ABCFG_REG110 0x110 // SB_TRAP1_ADDRL
-#define SB_ABCFG_REG114 0x114 // SB_TRAP1_ADDRH
-#define SB_ABCFG_REG118 0x118 // SB_TRAP1_CMD
-#define SB_ABCFG_REG11C 0x11C // SB_TRAP1_DATA
-#define SB_ABCFG_REG120 0x120 // SB_TRAP2_ADDRL
-#define SB_ABCFG_REG124 0x124 // SB_TRAP2_ADDRH
-#define SB_ABCFG_REG128 0x128 // SB_TRAP2_CMD
-#define SB_ABCFG_REG12C 0x12C // SB_TRAP2_DATA
-#define SB_ABCFG_REG130 0x130 // SB_TRAP3_ADDRL
-#define SB_ABCFG_REG134 0x134 // SB_TRAP3_ADDRH
-#define SB_ABCFG_REG138 0x138 // SB_TRAP3_CMD
-#define SB_ABCFG_REG13C 0x13C // SB_TRAP3_DATA
-#define SB_ABCFG_REG300 0x300 // MCTP_VDM_RX_SMI_CONTROL
-#define SB_ABCFG_REG310 0x310 // BIF_GPP_STRAP_SYSTEM_0
-#define SB_ABCFG_REG314 0x314 // BIF_GPP_STRAP_SYSTEM_1
-#define SB_ABCFG_REG31C 0x31C // BIF_GPP_STRAP_LINK_CONTROL_0
-#define SB_ABCFG_REG320 0x320 // BIF_GPP_STRAP_LINK_CONTROL_LANE_A
-#define SB_ABCFG_REG324 0x324 // BIF_GPP_STRAP_LINK_CONTROL_LANE_B
-#define SB_ABCFG_REG328 0x328 // BIF_GPP_STRAP_LINK_CONTROL_LANE_C
-#define SB_ABCFG_REG32C 0x32C // BIF_GPP_STRAP_LINK_CONTROL_LANE_D
-#define SB_ABCFG_REG330 0x330 // BIF_GPP_STRAP_BIF_0
-#define SB_ABCFG_REG334 0x334 // BIF_GPP_STRAP_BIF_1
-#define SB_ABCFG_REG338 0x338 // BIF_GPP_STRAP_BIF_2
-#define SB_ABCFG_REG340 0x340 // BIF_GPP_STRAP_BIF_LANE_A
-#define SB_ABCFG_REG344 0x344 // BIF_GPP_STRAP_BIF_LANE_B
-#define SB_ABCFG_REG348 0x348 // BIF_GPP_STRAP_BIF_LANE_C
-#define SB_ABCFG_REG34C 0x34C // BIF_GPP_STRAP_BIF_LANE_D
-#define SB_ABCFG_REG350 0x350 // BIF_GPP_STRAP_PHY_LOGICAL _0
-#define SB_ABCFG_REG354 0x354 // BIF_GPP_STRAP_PHY_LOGICAL _1
-#define SB_ABCFG_REG404 0x404 // GPP0_SHADOW_COMMAND
-#define SB_ABCFG_REG418 0x418 // GPP0_SHADOW_BUS_NUMBER
-#define SB_ABCFG_REG41C 0x41C // GPP0_SHADOW_IO_LIMIT_BASE
-#define SB_ABCFG_REG420 0x420 // GPP0_SHADOW_MEM_LIMIT_BASE
-#define SB_ABCFG_REG424 0x424 // GPP0_SHADOW_PREF_MEM_LIMIT_BASE
-#define SB_ABCFG_REG428 0x428 // GPP0_SHADOW_PREF_MEM_BASE_UPPER
-#define SB_ABCFG_REG42C 0x42C // GPP0_SHADOW_PREF_MEM_LIMIT_UPPER
-#define SB_ABCFG_REG430 0x430 // GPP0_SHADOW_IO_LIMIT_BASE_UPPER
-#define SB_ABCFG_REG43C 0x43C // GPP0_SHADOW_BRIDGE_CONTROL
-#define SB_ABCFG_REG444 0x444 // GPP1_SHADOW_COMMAND
-#define SB_ABCFG_REG458 0x458 // GPP1_SHADOW_BUS_NUMBER
-#define SB_ABCFG_REG45C 0x45C // GPP1_SHADOW_IO_LIMIT_BASE
-#define SB_ABCFG_REG460 0x460 // GPP1_SHADOW_MEM_LIMIT_BASE
-#define SB_ABCFG_REG464 0x464 // GPP1_SHADOW_PREF_MEM_LIMIT_BASE
-#define SB_ABCFG_REG468 0x468 // GPP1_SHADOW_PREF_MEM_BASE_UPPER
-#define SB_ABCFG_REG46C 0x46C // GPP1_SHADOW_PREF_MEM_LIMIT_UPPER
-#define SB_ABCFG_REG470 0x470 // GPP1_SHADOW_IO_LIMIT_BASE_UPPER
-#define SB_ABCFG_REG47C 0x47C // GPP1_SHADOW_BRIDGE_CONTROL
-#define SB_ABCFG_REG484 0x484 // GPP2_SHADOW_COMMAND
-#define SB_ABCFG_REG498 0x498 // GPP2_SHADOW_BUS_NUMBER
-#define SB_ABCFG_REG49C 0x49C // GPP2_SHADOW_IO_LIMIT_BASE
-#define SB_ABCFG_REG4A0 0x4A0 // GPP2_SHADOW_MEM_LIMIT_BASE
-#define SB_ABCFG_REG4A4 0x4A4 // GPP2_SHADOW_PREF_MEM_LIMIT_BASE
-#define SB_ABCFG_REG4A8 0x4A8 // GPP2_SHADOW_PREF_MEM_BASE_UPPER
-#define SB_ABCFG_REG4AC 0x4AC // GPP2_SHADOW_PREF_MEM_LIMIT_UPPER
-#define SB_ABCFG_REG4B0 0x4B0 // GPP2_SHADOW_IO_LIMIT_BASE_UPPER
-#define SB_ABCFG_REG4BC 0x4BC // GPP2_SHADOW_BRIDGE_CONTROL
-#define SB_ABCFG_REG4C4 0x4C4 // GPP3_SHADOW_COMMAND
-#define SB_ABCFG_REG4D8 0x4D8 // GPP3_SHADOW_BUS_NUMBER
-#define SB_ABCFG_REG4DC 0x4DC // GPP3_SHADOW_IO_LIMIT_BASE
-#define SB_ABCFG_REG4E0 0x4E0 // GPP3_SHADOW_MEM_LIMIT_BASE
-#define SB_ABCFG_REG4E4 0x4E4 // GPP3_SHADOW_PREF_MEM_LIMIT_BASE
-#define SB_ABCFG_REG4E8 0x4E8 // GPP3_SHADOW_PREF_MEM_BASE_UPPER
-#define SB_ABCFG_REG4EC 0x4EC // GPP3_SHADOW_PREF_MEM_LIMIT_UPPER
-#define SB_ABCFG_REG4F0 0x4F0 // GPP3_SHADOW_IO_LIMIT_BASE_UPPER
-#define SB_ABCFG_REG4FC 0x4FC // GPP3_SHADOW_BRIDGE_CONTROL
-#define SB_ABCFG_REG10040 0x10040 // AL_EVENTCNT0LO
-#define SB_ABCFG_REG10044 0x10044 // AL_EVENTCNT1LO
-#define SB_ABCFG_REG10048 0x10048 // AL_EVENTCNTSEL
-#define SB_ABCFG_REG1004A 0x1004A // AL_EVENTCNT0HI
-#define SB_ABCFG_REG1004B 0x1004B // AL_EVENTCNT1HI
-#define SB_ABCFG_REG1004C 0x1004C // AL_EVENTCNTCTL
-#define SB_ABCFG_REG10050 0x10050 // MISCCTL_10050
-#define SB_ABCFG_REG10054 0x10054 // AL_ARB_CTL
-#define SB_ABCFG_REG10056 0x10056 // AL_CLK_CTL
-#define SB_ABCFG_REG10058 0x10058 // AL RAB CONTROL
-#define SB_ABCFG_REG1005C 0x1005C // AL MLT CONTROL
-#define SB_ABCFG_REG10060 0x10060 // AL DMA PREFETCH ENABLE
-#define SB_ABCFG_REG10064 0x10064 // AL DMA PREFETCH FLUSH CONTROL
-#define SB_ABCFG_REG10068 0x10068 // AL PREFETCH LIMIT
-#define SB_ABCFG_REG1006C 0x1006C // AL DMA PREFETCH CONTROL
-#define SB_ABCFG_REG10070 0x10070 // MISCCTL_10070
-#define SB_ABCFG_REG10080 0x10080 // CLKMUXSTATUS
-#define SB_ABCFG_REG10090 0x10090 // BIF CONTROL 0
-#define SB_ABCFG_REG1009C 0x1009C // MISCCTL_1009C
-
-//
-// RCINDX_P Registers
-//
-#define SB_RCINDXP_REG01 0x01 | RCINDXP << 29 // PCIEP_SCRATCH
-#define SB_RCINDXP_REG10 0x10 | RCINDXP << 29 //
-#define SB_RCINDXP_REG20 0x20 | RCINDXP << 29 // PCIE_TX_CNTL
-#define SB_RCINDXP_REG50 0x50 | RCINDXP << 29 // PCIE_P_PORT_LANE_STATUS
-#define SB_RCINDXP_REG70 0x70 | RCINDXP << 29 // PCIE_RX_CNTL
-#define SB_RCINDXP_REGA0 0xA0 | RCINDXP << 29 // PCIE_LC_CNTL
-#define SB_RCINDXP_REGA1 0xA1 | RCINDXP << 29 // PCIE_LC_TRAINING_CNTL
-#define SB_RCINDXP_REGA2 0xA2 | RCINDXP << 29 //
-#define SB_RCINDXP_REGA4 0xA4 | RCINDXP << 29 //
-#define SB_RCINDXP_REGA5 0xA5 | RCINDXP << 29 // PCIE_LC_STATE0
-#define SB_RCINDXP_REGC0 0xC0 | RCINDXP << 29 //
-
-//
-// RCINDX_C Registers
-//
-#define SB_RCINDXC_REG02 0x02 | RCINDXC << 29 // PCIE_HW_DEBUG
-#define SB_RCINDXC_REG10 0x10 | RCINDXC << 29 // PCIE_CNTL
-#define SB_RCINDXC_REGC1 0xC1 | RCINDXC << 29 //
-
-//
-// AXINDC Registers
-//
-#define SB_AX_INDXC_REG02 0x02 // PCIEP_HW_DEBUG
-#define SB_AX_INDXC_REG10 0x10
-#define SB_AX_INDXC_REG30 0x30
-#define SB_AX_DATAC_REG34 0x34
-#define SB_AX_INDXP_REG38 0x38
-#define SB_AX_DATAP_REG3C 0x3C
-#define SB_AX_INDXC_REG40 0x40 | AXINDC << 29
-#define SB_AX_INDXC_REGA4 0xA4 | AXINDC << 29
-
-#define SB_AX_INDXP_REGA0 0xA0 | AXINDP << 29
-#define SB_AX_INDXP_REGA4 0xA4 | AXINDP << 29
-#define SB_AX_INDXP_REGB1 0xB1 | AXINDP << 29
-
-#define SB_AX_CFG_REG88 0x88 | AXCFG << 29
-
-#define AX_INDXC 0
-#define AX_INDXP 1
-#define SB_AB_REG04 0x04
-#define SB_AB_REG40 0x40
-
-#define RC_INDXC_REG40 0x40 | RCINDXC << 29
-#define RC_INDXC_REG65 0x65 | RCINDXC << 29
-
-//
-// SATA Device 0x4390 (IDE)
-// 0x4391 (AHCI)
-// 0x4392 (AHCI/RAID Promise with RAID driver)
-// 0x4393 (RAID5)
-// 0x4394/0x4395 (SATA HyperFlash OneNand support/SATA HyperFlash-PCIe support)
-// Device 17 (0x11) Func 0
-//
-//Sata Controller Mode
-#define NATIVE_IDE_MODE 0
-#define RAID_MODE 1
-#define AHCI_MODE 2
-#define LEGACY_IDE_MODE 3
-#define IDE_TO_AHCI_MODE 4
-#define AHCI_MODE_4394 5
-#define IDE_TO_AHCI_MODE_4394 6
-
-//Sata Port Configuration
-#define SIX_PORTS 0
-#define FOUR_PORTS 1
-
-#define SATA_EFUSE_LOCATION 0x10 // EFUSE bit 133
-#define SATA_FIS_BASE_EFUSE_LOC 0x15 // EFUSE bit 169
-#define SATA_EFUSE_BIT 0x20 //
-#define SB_SATA_REG00 0x000 // Vendor ID - R- 16 bits
-#define SB_SATA_REG02 0x002 // Device ID - RW -16 bits
-#define SB_SATA_REG04 0x004 // PCI Command - RW - 16 bits
-#define SB_SATA_REG06 0x006 // PCI Status - RW - 16 bits
-#define SB_SATA_REG08 0x008 // Revision ID/PCI Class Code - R - 32 bits - Offset: 08
-#define SB_SATA_REG0C 0x00C // Cache Line Size - R/W - 8bits
-#define SB_SATA_REG0D 0x00D // Latency Timer - RW - 8 bits
-#define SB_SATA_REG0E 0x00E // Header Type - R - 8 bits
-#define SB_SATA_REG0F 0x00F // BIST - R - 8 bits
-#define SB_SATA_REG10 0x010 // Base Address Register 0 - RW - 32 bits
-#define SB_SATA_REG14 0x014 // Base Address Register 1 - RW- 32 bits
-#define SB_SATA_REG18 0x018 // Base Address Register 2 - RW - 32 bits
-#define SB_SATA_REG1C 0x01C // Base Address Register 3 - RW - 32 bits
-#define SB_SATA_REG20 0x020 // Base Address Register 4 - RW - 32 bits
-#define SB_SATA_REG24 0x024 // Base Address Register 5 - RW - 32 bits
-#define SB_SATA_REG2C 0x02C // Subsystem Vendor ID - R - 16 bits
-#define SB_SATA_REG2D 0x02D // Subsystem ID - R - 16 bits
-#define SB_SATA_REG30 0x030 // Expansion ROM Base Address - 32 bits
-#define SB_SATA_REG34 0x034 // Capabilities Pointer - R - 32 bits
-#define SB_SATA_REG3C 0x03C // Interrupt Line - RW - 8 bits
-#define SB_SATA_REG3D 0x03D // Interrupt Pin - R - 8 bits
-#define SB_SATA_REG3E 0x03E // Min Grant - R - 8 bits
-#define SB_SATA_REG3F 0x03F // Max Latency - R - 8 bits
-#define SB_SATA_REG40 0x040 // Configuration - RW - 32 bits
-#define SB_SATA_REG44 0x044 // Software Data Register - RW - 32 bits
-#define SB_SATA_REG48 0x048
-#define SB_SATA_REG50 0x050 // Message Capability - R - 16 bits
-#define SB_SATA_REG52 0x052 // Message Control - R/W - 16 bits
-#define SB_SATA_REG54 0x054 // Message Address - R/W - 32 bits
-#define SB_SATA_REG58 0x058 // Message Data - R/W - 16 bits
-#define SB_SATA_REG5C 0x05C // RAMBIST Control Register - R/W - 8 bits
-#define SB_SATA_REG5D 0x05D // RAMBIST Status0 Register - R - 8 bits
-#define SB_SATA_REG5E 0x05E // RAMBIST Status1 Register - R - 8 bits
-#define SB_SATA_REG60 0x060 // Power Management Capabilities - R - 32 bits
-#define SB_SATA_REG64 0x064 // Power Management Control + Status - RW - 32 bits
-#define SB_SATA_REG68 0x068 // MSI Program - R/W - 8 bits
-#define SB_SATA_REG69 0x069 // PCI Burst Timer - R/W - 8 bits
-#define SB_SATA_REG70 0x070 // PCI Bus Master - IDE0 - RW - 32 bits
-#define SB_SATA_REG74 0x074 // PRD Table Address - IDE0 - RW - 32 bits
-#define SB_SATA_REG78 0x078 // PCI Bus Master - IDE1 - RW - 32 bits
-#define SB_SATA_REG7C 0x07C // PRD Table Address - IDE1 - RW - 32 bits
-#define SB_SATA_REG80 0x080 // Data Transfer Mode - IDE0 - RW - 32 bits
-#define SB_SATA_REG84 0x084 // Data Transfer Mode - IDE1 - RW - 32 bits
-#define SB_SATA_REG86 0x086 // PY Global Control
-#define SB_SATA_REG87 0x087
-#define SB_SATA_REG88 0x088 // PHY Port0 Control - Port0 PY fine tune (0:23)
-#define SB_SATA_REG8A 0x08A
-#define SB_SATA_REG8C 0x08C // PHY Port1 Control - Port0 PY fine tune (0:23)
-#define SB_SATA_REG8E 0x08E
-#define SB_SATA_REG90 0x090 // PHY Port2 Control - Port0 PY fine tune (0:23)
-#define SB_SATA_REG92 0x092
-#define SB_SATA_REG94 0x094 // PHY Port3 Control - Port0 PY fine tune (0:23)
-#define SB_SATA_REG96 0x096
-#define SB_SATA_REG98 0x098 // EEPROM Memory Address - Command + Status - RW - 32 bits
-#define SB_SATA_REG9C 0x09C // EEPROM Memory Data - RW - 32 bits
-#define SB_SATA_REGA0 0x0A0 //
-#define SB_SATA_REGA4 0x0A4 //
-#define SB_SATA_REGA5 0x0A5 //;
-#define SB_SATA_REGA8 0x0A8 //
-#define SB_SATA_REGAD 0x0AD //;
-#define SB_SATA_REGB0 0x0B0 // IDE1 Task File Configuration + Status - RW - 32 bits
-#define SB_SATA_REGB5 0x0B5 //;
-#define SB_SATA_REGBD 0x0BD //;
-#define SB_SATA_REGC0 0x0C0 // BA5 Indirect Address - RW - 32 bits
-#define SB_SATA_REGC4 0x0C4 // BA5 Indirect Access - RW - 32 bits
-
-#define SB_SATA_BAR5_REG00 0x000 // PCI Bus Master - IDE0 - RW - 32 bits
-#define SB_SATA_BAR5_REG04 0x004 // PRD Table Address - IDE0 - RW - 32 bits
-#define SB_SATA_BAR5_REG08 0x008 // PCI Bus Master - IDE1 - RW - 32 bits
-#define SB_SATA_BAR5_REG0C 0x00C // PRD Table Address - IDE1 - RW - 32 bits
-#define SB_SATA_BAR5_REG10 0x010 // PCI Bus Master2 - IDE0 - RW - 32 bits
-#define SB_SATA_BAR5_REG18 0x018 // PCI Bus Master2 - IDE1 - RW - 32 bits
-#define SB_SATA_BAR5_REG20 0x020 // PRD Address - IDE0 - RW - 32 bits
-#define SB_SATA_BAR5_REG24 0x024 // PCI Bus Master Byte Count - IDE0- RW - 32 bits
-#define SB_SATA_BAR5_REG28 0x028 // PRD Address - IDE1 - RW - 32 bits
-#define SB_SATA_BAR5_REG2C 0x02C // PCI Bus Master Byte Count - IDE1 - RW - 32 bits
-#define SB_SATA_BAR5_REG40 0x040 // FIFO Valid Byte Count and Control - IDE0 - RW - 32 bits
-#define SB_SATA_BAR5_REG44 0x044 // FIFO Valid Byte Count and Control - IDE1 - RW - 32 bits
-#define SB_SATA_BAR5_REG48 0x048 // System Configuration Status - Command - RW - 32 bits
-#define SB_SATA_BAR5_REG4C 0x04C // System Software Data Register - RW - 32 bits
-#define SB_SATA_BAR5_REG50 0x050 // FLAS Memory Address - Command + Status - RW - 32 bits
-#define SB_SATA_BAR5_REG54 0x054 // FLAS Memory Data - RW - 32 bits
-#define SB_SATA_BAR5_REG58 0x058 // EEPROM Memory Address - Command + Status - RW - 32 bits
-#define SB_SATA_BAR5_REG5C 0x05C // EEPROM Memory Data - RW - 32 bits
-#define SB_SATA_BAR5_REG60 0x060 // FIFO Port - IDE0 - RW - 32 bits
-#define SB_SATA_BAR5_REG68 0x068 // FIFO Pointers1- IDE0 - RW - 32 bits
-#define SB_SATA_BAR5_REG6C 0x06C // FIFO Pointers2- IDE0 - RW - 32 bits
-#define SB_SATA_BAR5_REG70 0x070 // FIFO Port - IDE1- RW - 32 bits
-#define SB_SATA_BAR5_REG78 0x078 // FIFO Pointers1- IDE1- RW - 32 bits
-#define SB_SATA_BAR5_REG7C 0x07C // FIFO Pointers2- IDE1- RW - 32 bits
-#define SB_SATA_BAR5_REG80 0x080 // IDE0 Task File Register 0- RW - 32 bits
-#define SB_SATA_BAR5_REG84 0x084 // IDE0 Task File Register 1- RW - 32 bits
-#define SB_SATA_BAR5_REG88 0x088 // IDE0 Task File Register 2- RW - 32 bits
-#define SB_SATA_BAR5_REG8C 0x08C // IDE0 Read Data - RW - 32 bits
-#define SB_SATA_BAR5_REG90 0x090 // IDE0 Task File Register 0 - Command Buffering - RW - 32 bits
-#define SB_SATA_BAR5_REG94 0x094 // IDE0 Task File Register 1 - Command Buffering - RW - 32 bits
-#define SB_SATA_BAR5_REG9C 0x09C // IDE0 Virtual DMA/PIO Read Byte Count - RW - 32 bits
-#define SB_SATA_BAR5_REGA0 0x0A0 // IDE0 Task File Configuration + Status - RW - 32 bits
-#define SB_SATA_BAR5_REGB4 0x0B4 // Data Transfer Mode -IDE0 - RW - 32 bits
-#define SB_SATA_BAR5_REGC0 0x0C0 // IDE1 Task File Register 0 - RW - 32 bits
-#define SB_SATA_BAR5_REGC4 0x0C4 // IDE1 Task File Register 1 - RW - 32 bits
-#define SB_SATA_BAR5_REGC8 0x0C8 // IDE1 Task File Register 2 - RW - 32 bits
-#define SB_SATA_BAR5_REGCC 0x0CC // Read/Write Data - RW - 32 bits
-#define SB_SATA_BAR5_REGD0 0x0D0 // IDE1 Task File Register 0 - Command Buffering - RW - 32 bits
-#define SB_SATA_BAR5_REGD4 0x0D4 // IDE1 Task File Register 1 - Command Buffering - RW - 32 bits
-#define SB_SATA_BAR5_REGDC 0x0DC // IDE1 Virtual DMA/PIO Read Byte Count - RW - 32 bits
-#define SB_SATA_BAR5_REGE0 0x0E0 // IDE1 Task File Configuration + Status - RW - 32 bits
-#define SB_SATA_BAR5_REGF4 0x0F4 // Data Transfer Mode - IDE1 - RW - 32 bits
-#define SB_SATA_BAR5_REGF8 0x0F8 // PORT Configuration
-#define SB_SATA_BAR5_REGFC 0x0FC
-#define SB_SATA_BAR5_REG100 0x0100 // Serial ATA SControl - RW - 32 bits - [Offset: 100h (channel 1) / 180
-#define SB_SATA_BAR5_REG104 0x0104 // Serial ATA Sstatus - RW - 32 bits - [Offset: 104h (channel 1) / 184h (cannel
-#define SB_SATA_BAR5_REG108 0x0108 // Serial ATA Serror - RW - 32 bits - [Offset: 108h (channel 1) / 188h (cannel
-#define SB_SATA_BAR5_REG10C 0x010C // Serial ATA Sdevice - RW - 32 bits - [Offset: 10Ch (channel 1) / 18Ch (cannel
-#define SB_SATA_BAR5_REG144 0x0144 // Serial ATA PY Configuration - RW - 32 bits
-#define SB_SATA_BAR5_REG148 0x0148 // SIEN - RW - 32 bits - [Offset: 148 (channel 1) / 1C8 (cannel 2)]
-#define SB_SATA_BAR5_REG14C 0x014C // SFISCfg - RW - 32 bits - [Offset: 14C (channel 1) / 1CC (cannel 2)]
-#define SB_SATA_BAR5_REG120 0x0120 //
-#define SB_SATA_BAR5_REG128 0x0128 // Port Serial ATA Status
-#define SB_SATA_BAR5_REG12C 0x012C // Port Serial ATA Control
-#define SB_SATA_BAR5_REG130 0x0130
-#define SB_SATA_BAR5_REG1B0 0x01B0
-#define SB_SATA_BAR5_REG230 0x0230
-#define SB_SATA_BAR5_REG2B0 0x02B0
-#define SB_SATA_BAR5_REG330 0x0330
-#define SB_SATA_BAR5_REG3B0 0x03B0
-
-//
-// FC Device 0x439B
-// Device 17 (0x11) Func 1
-//
-#define SB_FC_REG00 0x00 // Device/Vendor ID - R
-#define SB_FC_REG04 0x04 // Command - RW
-#define SB_FC_REG10 0x10 // BAR
-
-#define SB_FC_MMIO_REG70 0x070
-#define SB_FC_MMIO_REG200 0x200
-
-//
-// USB OHCI Device 0x4397
-// Device 18 (0x11)/Device 19 (0x12)/Device 22 (0x16) Func 0
-// Device 20 (0x14) Func 5 (FL)
-//
-#define SB_OHCI_REG00 0x00 // Device/Vendor ID - R (0x43971002)
-#define SB_OHCI_REG04 0x04 // Command - RW
-#define SB_OHCI_REG06 0x06 // Status - R
-#define SB_OHCI_REG08 0x08 // Revision ID/Class Code - R
-#define SB_OHCI_REG0C 0x0C // Miscellaneous - RW
-#define SB_OHCI_REG10 0x10 // Bar_OCI - RW
-#define SB_OHCI_REG2C 0x2C // Subsystem Vendor ID/ Subsystem ID - RW
-#define SB_OHCI_REG34 0x34 // Capability Pointer - R
-#define SB_OHCI_REG3C 0x3C // Interrupt Line - RW
-#define SB_OHCI_REG3D 0x3D // Interrupt Line - RW
-#define SB_OHCI_REG40 0x40 // Config Timers - RW
-#define SB_OHCI_REG42 0x42 // Port Disable Control - RW (800)
-#define SB_OHCI_REG46 0x46 // USB PHY Battery Charger - RW (800)
-#define SB_OHCI_REG48 0x48 // Port Force Reset - RW (800)
-#define SB_OHCI_REG4C 0x4C // MSI - RW (800)
-#define SB_OHCI_REG50 0x50 // Misc Control - RW
-#define SB_OHCI_REG51 0x51
-#define SB_OHCI_REG52 0x52
-#define SB_OHCI_REG58 0x58 // Over Current Control - RW
-#define SB_OHCI_REG5C 0x5C // Over Current Control - RW (800)??
-#define SB_OHCI_REG60 0x60 // Serial Bus Release Number - R (800)??
-#define SB_OHCI_REG68 0x68 // Over Current PME Enable - RW
-#define SB_OHCI_REG74 0x74 // Target Timeout Control - RW (800)
-#define SB_OHCI_REGD0 0x0D0 // MSI Control - RW
-#define SB_OHCI_REGD4 0x0D4 // MSI Address - RW
-#define SB_OHCI_REGD8 0x0D8 // MSI Data - RW
-#define SB_OHCI_REGE4 0x0E4 // HT MSI Support
-#define SB_OHCI_REGF0 0x0F0 // Function Level Reset Capability
-#define SB_OHCI_REGF4 0x0F4 // Function Level Reset Control
-
-#define SB_OHCI_BAR_REG00 0x00 // cRevision - R
-#define SB_OHCI_BAR_REG04 0x04 // cControl
-#define SB_OHCI_BAR_REG08 0x08 // cCommandStatus
-#define SB_OHCI_BAR_REG0C 0x0C // cInterruptStatus RW
-#define SB_OHCI_BAR_REG10 0x10 // cInterruptEnable
-#define SB_OHCI_BAR_REG14 0x14 // cInterruptDisable
-#define SB_OHCI_BAR_REG18 0x18 // HcCCA
-#define SB_OHCI_BAR_REG1C 0x1C // cPeriodCurrentED
-#define SB_OHCI_BAR_REG20 0x20 // HcControleadED
-#define SB_OHCI_BAR_REG24 0x24 // cControlCurrentED RW
-#define SB_OHCI_BAR_REG28 0x28 // HcBulkeadED
-#define SB_OHCI_BAR_REG2C 0x2C // cBulkCurrentED- RW
-#define SB_OHCI_BAR_REG30 0x30 // HcDoneead
-#define SB_OHCI_BAR_REG34 0x34 // cFmInterval
-#define SB_OHCI_BAR_REG38 0x38 // cFmRemaining
-#define SB_OHCI_BAR_REG3C 0x3C // cFmNumber
-#define SB_OHCI_BAR_REG40 0x40 // cPeriodicStart
-#define SB_OHCI_BAR_REG44 0x44 // HcLSThresold
-#define SB_OHCI_BAR_REG48 0x48 // HcRDescriptorA
-#define SB_OHCI_BAR_REG4C 0x4C // HcRDescriptorB
-#define SB_OHCI_BAR_REG50 0x50 // HcRStatus
-#define SB_OHCI_BAR_REG54 0x54 // HcRhPortStatus (800)
-#define SB_OHCI_BAR_REG58 0x58 // HcRhPortStatus NPD (800)
-#define SB_OHCI_BAR_REGF0 0xF0 // OHCI Loop Back feature Support (800)
-
-//
-// USB EHCI Device 0x4396
-// Device 18 (0x11)/Device 19 (0x12)/Device 22 (0x16) Func 2
-//
-#define SB_EHCI_REG00 0x00 // DEVICE/VENDOR ID - R
-#define SB_EHCI_REG04 0x04 // Command - RW
-#define SB_EHCI_REG06 0x06 // Status - R
-#define SB_EHCI_REG08 0x08 // Revision ID/Class Code - R
-#define SB_EHCI_REG0C 0x0C // Miscellaneous - RW
-#define SB_EHCI_REG10 0x10 // BAR - RW
-#define SB_EHCI_REG2C 0x2C // Subsystem ID/Subsystem Vendor ID - RW
-#define SB_EHCI_REG34 0x34 // Capability Pointer - R
-#define SB_EHCI_REG3C 0x3C // Interrupt Line - RW
-#define SB_EHCI_REG3D 0x3D // Interrupt Line - RW ??
-#define SB_EHCI_REG40 0x40 // Config Timers - RW ??
-#define SB_EHCI_REG4C 0x4C // MSI - RW
-#define SB_EHCI_REG50 0x50 // EHCI Misc Control - RW
-#define SB_EHCI_REG54 0x54 // EHCI Misc Control - RW
-#define SB_EHCI_REG60 0x60 // SBRN - R
-#define SB_EHCI_REG61 0x61 // FLADJ - RW
-#define SB_EHCI_REG62 0x62 // PORTWAKECAP - RW
-#define SB_EHCI_REGC0 0x0C0 // PME control - RW (800)
-#define SB_EHCI_REGC4 0x0C4 // PME Data /Status - RW (800)
-#define SB_EHCI_REGD0 0x0D0 // MSI Control - RW
-#define SB_EHCI_REGD4 0x0D4 // MSI Address - RW
-#define SB_EHCI_REGD8 0x0D8 // MSI Data - RW
-#define SB_EHCI_REGE4 0x0E4 // EHCI Debug Port Support - RW (800)
-#define SB_EHCI_REGF0 0x0F0 // Function Level Reset Capability - R (800)
-#define SB_EHCI_REGF4 0x0F4 // Function Level Reset Capability - R (800)
-
-#define SB_EHCI_BAR_REG00 0x00 // CAPLENGT - R
-#define SB_EHCI_BAR_REG02 0x002 // CIVERSION- R
-#define SB_EHCI_BAR_REG04 0x004 // CSPARAMS - R
-#define SB_EHCI_BAR_REG08 0x008 // CCPARAMS - R
-#define SB_EHCI_BAR_REG0C 0x00C // CSP-PORTROUTE - R
-
-#define SB_EHCI_BAR_REG20 0x020 // USBCMD - RW - 32 bits
-#define SB_EHCI_BAR_REG24 0x024 // USBSTS - RW - 32 bits
-#define SB_EHCI_BAR_REG28 0x028 // USBINTR -RW - 32 bits
-#define SB_EHCI_BAR_REG2C 0x02C // FRINDEX -RW - 32 bits
-#define SB_EHCI_BAR_REG30 0x030 // CTRLDSSEGMENT -RW - 32 bits
-#define SB_EHCI_BAR_REG34 0x034 // PERIODICLISTBASE -RW - 32 bits
-#define SB_EHCI_BAR_REG38 0x038 // ASYNCLISTADDR -RW - 32 bits
-#define SB_EHCI_BAR_REG60 0x060 // CONFIGFLAG -RW - 32 bits
-#define SB_EHCI_BAR_REG64 0x064 // PORTSC (1-N_PORTS) -RW - 32 bits
-#define SB_EHCI_BAR_REGA0 0x0A0 // DebugPort MISC Control - RW - 32 bits (800)
-#define SB_EHCI_BAR_REGA4 0x0A4 // Packet Buffer Threshold Values - RW - 32 bits
-#define SB_EHCI_BAR_REGA8 0x0A8 // USB PHY Status 0 - R
-#define SB_EHCI_BAR_REGAC 0x0AC // USB PHY Status 1 - R
-#define SB_EHCI_BAR_REGB0 0x0B0 // USB PHY Status 2 - R
-#define SB_EHCI_BAR_REGB4 0x0B4 // UTMI Control - RW (800)
-#define SB_EHCI_BAR_REGB8 0x0B8 // Loopback Test
-#define SB_EHCI_BAR_REGBC 0x0BC // EHCI MISC Control
-#define SB_EHCI_BAR_REGC0 0x0C0 // USB PHY Calibration
-#define SB_EHCI_BAR_REGC4 0x0C4 // USB Common PHY Control
-#define SB_EHCI_BAR_REGC8 0x0C8 // EHCI Debug Purpose
-#define SB_EHCI_BAR_REGCC 0x0CC // Ehci Spare 1 (800) **
-#define SB_EHCI_BAR_REG100 0x100 // USB debug port
-
-//
-// SB800 SB CFG device 0x4385
-// Device 20 (0x14) Func 0
-//
-#define SB_CFG_REG00 0x000 // VendorID - R
-#define SB_CFG_REG02 0x002 // DeviceID - R
-#define SB_CFG_REG04 0x004 // Command- RW
-#define SB_CFG_REG05 0x005 // Command- RW
-#define SB_CFG_REG06 0x006 // STATUS- RW
-#define SB_CFG_REG08 0x008 // Revision ID/Class Code- R
-#define SB_CFG_REG0A 0x00A //
-#define SB_CFG_REG0B 0x00B //
-#define SB_CFG_REG0C 0x00C // Cache Line Size- R
-#define SB_CFG_REG0D 0x00D // Latency Timer- R
-#define SB_CFG_REG0E 0x00E // Header Type- R
-#define SB_CFG_REG0F 0x00F // BIST- R
-#define SB_CFG_REG10 0x010 // Base Address 0- R
-#define SB_CFG_REG11 0x011 //;
-#define SB_CFG_REG12 0x012 //;
-#define SB_CFG_REG13 0x013 //;
-#define SB_CFG_REG14 0x014 // Base Address 1- R
-#define SB_CFG_REG18 0x018 // Base Address 2- R
-#define SB_CFG_REG1C 0x01C // Base Address 3- R
-#define SB_CFG_REG20 0x020 // Base Address 4- R
-#define SB_CFG_REG24 0x024 // Base Address 5- R
-#define SB_CFG_REG28 0x028 // Cardbus CIS Pointer- R
-#define SB_CFG_REG2C 0x02C // Subsystem Vendor ID- W
-#define SB_CFG_REG2E 0x02E // Subsystem ID- W
-#define SB_CFG_REG30 0x030 // Expansion ROM Base Address - R
-#define SB_CFG_REG34 0x034 // Capability Pointer - R (800) default changed as 0x00
-#define SB_CFG_REG3C 0x03C // Interrupt Line - R
-#define SB_CFG_REG3D 0x03D // Interrupt Pin - R
-#define SB_CFG_REG3E 0x03E // Min_Gnt - R
-#define SB_CFG_REG3F 0x03F // Max_Lat - R
-#define SB_CFG_REG90 0x090 // Smbus Base Address - R
-#define SB_CFG_REG9C 0x09C // SBResourceMMIO_BASE
-
-//
-// SB800 SATA IDE device 0x439C
-// Device 20 (0x14) Func 1
-//
-
-#define SB_IDE_REG00 0x00 // Vendor ID
-#define SB_IDE_REG02 0x02 // Device ID
-#define SB_IDE_REG04 0x04 // Command
-#define SB_IDE_REG06 0x06 // Status
-#define SB_IDE_REG08 0x08 // Revision ID/Class Code
-#define SB_IDE_REG09 0x09 // Class Code
-#define SB_IDE_REG2C 0x2C // Subsystem ID and Subsystem Vendor ID
-#define SB_IDE_REG34 0x34
-#define SB_IDE_REG40 0x40 // Configuration - RW - 32 bits
-#define SB_IDE_REG62 0x62 // IDE Internal Control
-#define SB_IDE_REG63 0x63 // IDE Internal Control
-//
-// SB800 AZALIA device 0x4383
-// Device 20 (0x14) Func 2
-//
-#define ATI_AZALIA_ExtBlk_Addr 0x0F8
-#define ATI_AZALIA_ExtBlk_DATA 0x0FC
-
-#define SB_AZ_REG00 0x00 // Vendor ID - R
-#define SB_AZ_REG02 0x02 // Device ID - R/W
-#define SB_AZ_REG04 0x04 // PCI Command
-#define SB_AZ_REG06 0x06 // PCI Status - R/W
-#define SB_AZ_REG08 0x08 // Revision ID
-#define SB_AZ_REG09 0x09 // Programming Interface
-#define SB_AZ_REG0A 0x0A // Sub Class Code
-#define SB_AZ_REG0B 0x0B // Base Class Code
-#define SB_AZ_REG0C 0x0C // Cache Line Size - R/W
-#define SB_AZ_REG0D 0x0D // Latency Timer
-#define SB_AZ_REG0E 0x0E // Header Type
-#define SB_AZ_REG0F 0x0F // BIST
-#define SB_AZ_REG10 0x10 // Lower Base Address Register
-#define SB_AZ_REG14 0x14 // Upper Base Address Register
-#define SB_AZ_REG2C 0x2C // Subsystem Vendor ID
-#define SB_AZ_REG2D 0x2D // Subsystem ID
-#define SB_AZ_REG34 0x34 // Capabilities Pointer
-#define SB_AZ_REG3C 0x3C // Interrupt Line
-#define SB_AZ_REG3D 0x3D // Interrupt Pin
-#define SB_AZ_REG3E 0x3E // Minimum Grant
-#define SB_AZ_REG3F 0x3F // Maximum Latency
-#define SB_AZ_REG40 0x40 // Misc Control 1
-#define SB_AZ_REG42 0x42 // Misc Control 2 Register
-#define SB_AZ_REG43 0x43 // Misc Control 3 Register
-#define SB_AZ_REG44 0x44 // Interrupt Pin Control Register
-#define SB_AZ_REG46 0x46 // Debug Control Register
-#define SB_AZ_REG4C 0x4C
-#define SB_AZ_REG50 0x50 // Power Management Capability ID
-#define SB_AZ_REG52 0x52 // Power Management Capabilities
-#define SB_AZ_REG54 0x54 // Power Management Control/Status
-#define SB_AZ_REG60 0x60 // MSI Capability ID
-#define SB_AZ_REG62 0x62 // MSI Message Control
-#define SB_AZ_REG64 0x64 // MSI Message Lower Address
-#define SB_AZ_REG68 0x68 // MSI Message Upper Address
-#define SB_AZ_REG6C 0x6C // MSI Message Data
-
-#define SB_AZ_BAR_REG00 0x00 // Global Capabilities - R
-#define SB_AZ_BAR_REG02 0x02 // Minor Version - R
-#define SB_AZ_BAR_REG03 0x03 // Major Version - R
-#define SB_AZ_BAR_REG04 0x04 // Output Payload Capability - R
-#define SB_AZ_BAR_REG06 0x06 // Input Payload Capability - R
-#define SB_AZ_BAR_REG08 0x08 // Global Control - R/W
-#define SB_AZ_BAR_REG0C 0x0C // Wake Enable - R/W
-#define SB_AZ_BAR_REG0E 0x0E // State Change Status - R/W
-#define SB_AZ_BAR_REG10 0x10 // Global Status - R/W
-#define SB_AZ_BAR_REG18 0x18 // Output Stream Payload Capability - R
-#define SB_AZ_BAR_REG1A 0x1A // Input Stream Payload Capability - R
-#define SB_AZ_BAR_REG20 0x20 // Interrupt Control - R/W
-#define SB_AZ_BAR_REG24 0x24 // Interrupt Status - R/W
-#define SB_AZ_BAR_REG30 0x30 // Wall Clock Counter - R
-#define SB_AZ_BAR_REG38 0x38 // Stream Synchronization - R/W
-#define SB_AZ_BAR_REG40 0x40 // CORB Lower Base Address - R/W
-#define SB_AZ_BAR_REG44 0x44 // CORB Upper Base Address - RW
-#define SB_AZ_BAR_REG48 0x48 // CORB Write Pointer - R/W
-#define SB_AZ_BAR_REG4A 0x4A // CORB Read Pointer - R/W
-#define SB_AZ_BAR_REG4C 0x4C // CORB Control - R/W
-#define SB_AZ_BAR_REG4D 0x4D // CORB Status - R/W
-#define SB_AZ_BAR_REG4E 0x4E // CORB Size - R/W
-#define SB_AZ_BAR_REG50 0x50 // RIRB Lower Base Address - RW
-#define SB_AZ_BAR_REG54 0x54 // RIRB Upper Address - RW
-#define SB_AZ_BAR_REG58 0x58 // RIRB Write Pointer - RW
-#define SB_AZ_BAR_REG5A 0x5A // RIRB Response Interrupt Count - R/W
-#define SB_AZ_BAR_REG5C 0x5C // RIRB Control - R/W
-#define SB_AZ_BAR_REG5D 0x5D // RIRB Status - R/W
-#define SB_AZ_BAR_REG5E 0x5E // RIRB Size - R/W
-#define SB_AZ_BAR_REG60 0x60 // Immediate Command Output Interface - R/W
-#define SB_AZ_BAR_REG64 0x64 // Immediate Command Input Interface - R/W
-#define SB_AZ_BAR_REG68 0x68 // Immediate Command Input Interface - R/W
-#define SB_AZ_BAR_REG70 0x70 // DMA Position Lower Base Address - R/W
-#define SB_AZ_BAR_REG74 0x74 // DMA Position Upper Base Address - R/W
-#define SB_AZ_BAR_REG2030 0x2030 // Wall Clock Counter Alias - R
-
-//
-// SB800 LPC Device 0x439D
-// Device 20 (0x14) Func 3
-//
-#define SB_LPC_REG00 0x00 // VID- R
-#define SB_LPC_REG02 0x02 // DID- R
-#define SB_LPC_REG04 0x04 // CMD- RW
-#define SB_LPC_REG06 0x06 // STATUS- RW
-#define SB_LPC_REG08 0x08 // Revision ID/Class Code - R
-#define SB_LPC_REG0C 0x0C // Cache Line Size - R
-#define SB_LPC_REG0D 0x0D // Latency Timer - R
-#define SB_LPC_REG0E 0x0E // Header Type - R
-#define SB_LPC_REG0F 0x0F // BIST- R
-#define SB_LPC_REG10 0x10 // Base Address Reg 0- RW*
-#define SB_LPC_REG2C 0x2C // Subsystem ID & Subsystem Vendor ID - Wo/Ro
-#define SB_LPC_REG34 0x34 // Capabilities Pointer - Ro
-#define SB_LPC_REG40 0x40 // PCI Control - RW
-#define SB_LPC_REG44 0x44 // IO Port Decode Enable Register 1- RW
-#define SB_LPC_REG45 0x45 // IO Port Decode Enable Register 2- RW
-#define SB_LPC_REG46 0x46 // IO Port Decode Enable Register 3- RW
-#define SB_LPC_REG47 0x47 // IO Port Decode Enable Register 4- RW
-#define SB_LPC_REG48 0x48 // IO/Mem Port Decode Enable Register 5- RW
-#define SB_LPC_REG49 0x49 // LPC Sync Timeout Count - RW
-#define SB_LPC_REG4A 0x4A // IO/Mem Port Decode Enable Register 6- RW
-#define SB_LPC_REG4C 0x4C // Memory Range Register - RW
-#define SB_LPC_REG50 0x50 // Rom Protect 0 - RW
-#define SB_LPC_REG54 0x54 // Rom Protect 1 - RW
-#define SB_LPC_REG58 0x58 // Rom Protect 2 - RW
-#define SB_LPC_REG5C 0x5C // Rom Protect 3 - RW
-#define SB_LPC_REG60 0x60 // PCI Memory Start Address of LPC Target Cycles -
-#define SB_LPC_REG62 0x62 // PCI Memory End Address of LPC Target Cycles -
-#define SB_LPC_REG64 0x64 // PCI IO base Address of Wide Generic Port - RW
-#define SB_LPC_REG65 0x65
-#define SB_LPC_REG66 0x66
-#define SB_LPC_REG67 0x67
-#define SB_LPC_REG68 0x68 // LPC ROM Address Range 1 (Start Address) - RW
-#define SB_LPC_REG69 0x69
-#define SB_LPC_REG6A 0x6A // LPC ROM Address Range 1 (End Address) - RW
-#define SB_LPC_REG6B 0x6B
-#define SB_LPC_REG6C 0x6C // LPC ROM Address Range 2 (Start Address)- RW
-#define SB_LPC_REG6D 0x6D
-#define SB_LPC_REG6E 0x6E // LPC ROM Address Range 2 (End Address) - RW
-#define SB_LPC_REG6F 0x6F
-#define SB_LPC_REG70 0x70 // Firmware ub Select - RW*
-#define SB_LPC_REG71 0x71
-#define SB_LPC_REG72 0x72
-#define SB_LPC_REG73 0x73
-#define SB_LPC_REG74 0x74 // Alternative Wide IO Range Enable- W/R
-#define SB_LPC_REG78 0x78 // Miscellaneous Control Bits- W/R
-#define SB_LPC_REG7C 0x7C // TPM (trusted plant form module) reg- W/R
-#define SB_LPC_REG9C 0x9C
-#define SB_LPC_REG80 0x80 // MSI Capability Register- R
-#define SB_LPC_REGA0 0x0A0 // SPI base address
-#define SB_LPC_REGA1 0x0A1 // SPI base address
-#define SB_LPC_REGA2 0x0A2 // SPI base address
-#define SB_LPC_REGA3 0x0A3 // SPI base address
-#define SB_LPC_REGA4 0x0A4
-#define SB_LPC_REGBA 0x0BA // EcControl
-#define SB_LPC_REGBB 0x0BB // HostControl
-
-//
-// SB800 PCIB 0x4384
-// Device 20 (0x14) Func 4
-//
-#define SB_PCIB_REG04 0x04 // Command
-#define SB_PCIB_REG0D 0x0D // Primary Master Latency Timer
-#define SB_PCIB_REG1B 0x1B // Secondary Latency Timer
-#define SB_PCIB_REG1C 0x1C // IO Base
-#define SB_PCIB_REG1D 0x1D // IO Limit
-#define SB_PCIB_REG40 0x40 // CPCTRL
-#define SB_PCIB_REG42 0x42 // CLKCTRL
-#define SB_PCIB_REG48 0x48 //
-#define SB_PCIB_REG4A 0x4A // PCICLK Enable Bits
-#define SB_PCIB_REG4B 0x4B // Misc Control
-#define SB_PCIB_REG4C 0x4C // AutoClockRun Control
-#define SB_PCIB_REG50 0x50 // Dual Address Cycle Enable and PCIB_CLK_Stop Override
-#define SB_PCIB_REG65 0x65 // Misc Control
-#define SB_PCIB_REG66 0x66 // Misc Control
-//
-// SB800 NIC 0x4384
-// Device 20 (0x14) Func 6 (Func5 OHCI FL device)
-//
-#define SB_GEC_REG04 0x04 // Command
-#define SB_GEC_REG10 0x10 // GEC BAR
-
-//
-// SB800 SB MMIO Base (SMI)
-// offset : 0x200
-//
-#define SB_SMI_REG00 0x00 // EventStatus
-#define SB_SMI_REG04 0x04 // EventEnable
-#define SB_SMI_REG08 0x08 // SciTrig
-#define SB_SMI_REG0C 0x0C // SciLevl
-#define SB_SMI_REG10 0x10 // SmiSciStatus
-#define SB_SMI_REG14 0x14 // SmiSciEn
-#define SB_SMI_REG18 0x18 // ForceSciEn
-#define SB_SMI_REG1C 0x1C // SciRwData
-#define SB_SMI_REG20 0x20 // SciS0En
-#define SB_SMI_Gevent0 0x40 // SciMap0
-#define SB_SMI_Gevent1 0x41 // SciMap1
-#define SB_SMI_Gevent2 0x42 // SciMap2
-#define SB_SMI_Gevent3 0x43 // SciMap3
-#define SB_SMI_Gevent4 0x44 // SciMap4
-#define SB_SMI_Gevent5 0x45 // SciMap5
-#define SB_SMI_Gevent6 0x46 // SciMap6
-#define SB_SMI_Gevent7 0x47 // SciMap7
-#define SB_SMI_Gevent8 0x48 // SciMap8
-#define SB_SMI_Gevent9 0x49 // SciMap9
-#define SB_SMI_Gevent10 0x4A // SciMap10
-#define SB_SMI_Gevent11 0x4B // SciMap11
-#define SB_SMI_Gevent12 0x4C // SciMap12
-#define SB_SMI_Gevent13 0x4D // SciMap13
-#define SB_SMI_Gevent14 0x4E // SciMap14
-#define SB_SMI_Gevent15 0x4F // SciMap15
-#define SB_SMI_Gevent16 0x50 // SciMap16
-#define SB_SMI_Gevent17 0x51 // SciMap17
-#define SB_SMI_Gevent18 0x52 // SciMap18
-#define SB_SMI_Gevent19 0x53 // SciMap19
-#define SB_SMI_Gevent20 0x54 // SciMap20
-#define SB_SMI_Gevent21 0x55 // SciMap21
-#define SB_SMI_Gevent22 0x56 // SciMap22
-#define SB_SMI_Gevent23 0x57 // SciMap23
-#define SB_SMI_Usbwakup0 0x58 // SciMap24
-#define SB_SMI_Usbwakup1 0x59 // SciMap25
-#define SB_SMI_Usbwakup2 0x5A // SciMap26
-#define SB_SMI_Usbwakup3 0x5B // SciMap27
-#define SB_SMI_SBGppPme0 0x5C // SciMap28
-#define SB_SMI_SBGppPme1 0x5D // SciMap29
-#define SB_SMI_SBGppPme2 0x5E // SciMap30
-#define SB_SMI_SBGppPme3 0x5F // SciMap31
-#define SB_SMI_SBGppHp0 0x60 // SciMap32
-#define SB_SMI_SBGppHp1 0x61 // SciMap33
-#define SB_SMI_SBGppHp2 0x62 // SciMap34
-#define SB_SMI_SBGppHp3 0x63 // SciMap35
-#define SB_SMI_AzaliaPme 0x64 // SciMap36
-#define SB_SMI_SataGevent0 0x65 // SciMap37
-#define SB_SMI_SataGevent1 0x66 // SciMap38
-#define SB_SMI_GecPme 0x67 // SciMap39
-#define SB_SMI_IMCGevent0 0x68 // SciMap40
-#define SB_SMI_IMCGevent1 0x69 // SciMap41
-#define SB_SMI_CIRPme 0x6A // SciMap42
-#define SB_SMI_WakePinGevent 0x6B // SciMap43
-#define SB_SMI_FanThGevent 0x6C // SciMap44 //FanThermalGevent
-#define SB_SMI_ASFMasterIntr 0x6D // SciMap45
-#define SB_SMI_ASFSlaveIntr 0x6E // SciMap46
-#define SB_SMI_SMBUS0 0x6F // SciMap47
-#define SB_SMI_TWARN 0x70 // SciMap48
-#define SB_SMI_TMI 0x71 // SciMap49 // TrafficMonitorIntr
-
-// Empty from 0x72-0x7F
-//#Define SB_SMI_REG7C 0x7F // SciMap63 ***
-
-#define SB_SMI_REG80 0x80 // SmiStatus0
-#define SB_SMI_REG84 0x84 // SmiStatus1
-#define SB_SMI_REG88 0x88 // SmiStatus2
-#define SB_SMI_REG8C 0x8C // SmiStatus3
-#define SB_SMI_REG90 0x90 // SmiStatus4
-#define SB_SMI_REG94 0x94 // SmiPointer
-#define SB_SMI_REG96 0x96 // SmiTimer
-#define SB_SMI_REG98 0x98 // SmiTrig
-#define SB_SMI_REG9C 0x9C // SmiTrig
-#define SB_SMI_REGA0 0xA0
-#define SB_SMI_REGA1 0xA1
-#define SB_SMI_REGA2 0xA2
-#define SB_SMI_REGA3 0xA3
-#define SB_SMI_REGA4 0xA4
-#define SB_SMI_REGA5 0xA5
-#define SB_SMI_REGA6 0xA6
-#define SB_SMI_REGA7 0xA7
-#define SB_SMI_REGA8 0xA8
-#define SB_SMI_REGA9 0xA9
-#define SB_SMI_REGAA 0xAA
-#define SB_SMI_REGAB 0xAB
-#define SB_SMI_REGAC 0xAC
-#define SB_SMI_REGAD 0xAD
-#define SB_SMI_REGAE 0xAE
-#define SB_SMI_REGAF 0xAF
-#define SB_SMI_REGB0 0xB0
-#define SB_SMI_REGB1 0xB1
-#define SB_SMI_REGB2 0xB2
-#define SB_SMI_REGB3 0xB3
-#define SB_SMI_REGB4 0xB4
-#define SB_SMI_REGB5 0xB5
-#define SB_SMI_REGB6 0xB6
-#define SB_SMI_REGB7 0xB7
-#define SB_SMI_REGB8 0xB8
-#define SB_SMI_REGB9 0xB9
-#define SB_SMI_REGBA 0xBA
-#define SB_SMI_REGBB 0xBB
-#define SB_SMI_REGBC 0xBC
-#define SB_SMI_REGBD 0xBD
-#define SB_SMI_REGBE 0xBE
-#define SB_SMI_REGBF 0xBF
-#define SB_SMI_REGC0 0xC0
-#define SB_SMI_REGC1 0xC1
-#define SB_SMI_REGC2 0xC2
-#define SB_SMI_REGC3 0xC3
-#define SB_SMI_REGC4 0xC4
-#define SB_SMI_REGC5 0xC5
-#define SB_SMI_REGC6 0xC6
-#define SB_SMI_REGC7 0xC7
-#define SB_SMI_REGC8 0xC8
-#define SB_SMI_REGCA 0xCA // IoTrapping1
-#define SB_SMI_REGCC 0xCC // IoTrapping2
-#define SB_SMI_REGCE 0xCE // IoTrapping3
-#define SB_SMI_REGD0 0xD0 // MemTrapping0
-#define SB_SMI_REGD4 0xD4 // MemRdOvrData0
-#define SB_SMI_REGD8 0xD8 // MemTrapping1
-#define SB_SMI_REGDC 0xDC // MemRdOvrData1
-#define SB_SMI_REGE0 0xE0 // MemTrapping2
-#define SB_SMI_REGE4 0xE4 // MemRdOvrData2
-#define SB_SMI_REGE8 0xE8 // MemTrapping3
-#define SB_SMI_REGEC 0xEC // MemRdOvrData3
-#define SB_SMI_REGF0 0xF0 // CfgTrapping0
-#define SB_SMI_REGF4 0xF4 // CfgTrapping1
-#define SB_SMI_REGF8 0xF8 // CfgTrapping2
-#define SB_SMI_REGFC 0xFC // CfgTrapping3
-
-//
-// SB800 SB MMIO Base (PMIO)
-// offset : 0x300
-//
-#define SB_PMIOA_REG00 0x00 // ISA Decode
-#define SB_PMIOA_REG04 0x04 // ISA Control
-#define SB_PMIOA_REG08 0x08 // PCI Control
-#define SB_PMIOA_REG0C 0x0C // StpClkSmaf
-#define SB_PMIOA_REG10 0x10 // RetryDetect
-#define SB_PMIOA_REG14 0x14 // StuckDetect
-#define SB_PMIOA_REG20 0x20 // BiosRamEn
-#define SB_PMIOA_REG24 0x24 // AcpiMmioEn
-#define SB_PMIOA_REG28 0x28 // AsfEn
-#define SB_PMIOA_REG2C 0x2C // Smbus0En
-#define SB_PMIOA_REG34 0x34 // IoApicEn
-#define SB_PMIOA_REG3C 0x3C // SmartVoltEn
-#define SB_PMIOA_REG40 0x40 // SmartVolt2En
-#define SB_PMIOA_REG44 0x44 // BootTimerEn
-#define SB_PMIOA_REG48 0x48 // WatchDogTimerEn
-#define SB_PMIOA_REG4C 0x4C // WatchDogTimerConfig
-#define SB_PMIOA_REG50 0x50 // HPETEn
-#define SB_PMIOA_REG54 0x54 // SerialIrqConfig
-#define SB_PMIOA_REG56 0x56 // RtcControl
-#define SB_PMIOA_REG58 0x58 // VRT_T1
-#define SB_PMIOA_REG59 0x59 // VRT_T2
-#define SB_PMIOA_REG5A 0x5A // IntruderControl
-#define SB_PMIOA_REG5B 0x5B // RtcShadow
-#define SB_PMIOA_REG5C 0x5C
-#define SB_PMIOA_REG5D 0x5D
-#define SB_PMIOA_REG5E 0x5E // RtcExtIndex
-#define SB_PMIOA_REG5F 0x5F // RtcExtData
-#define SB_PMIOA_REG60 0x60 // AcpiPm1EvtBlk
-#define SB_PMIOA_REG62 0x62 // AcpiPm1CntBlk
-#define SB_PMIOA_REG64 0x64 // AcpiPmTmrBlk
-#define SB_PMIOA_REG66 0x66 // P_CNTBlk
-#define SB_PMIOA_REG68 0x68 // AcpiGpe0Blk
-#define SB_PMIOA_REG6A 0x6A // AcpiSmiCmd
-#define SB_PMIOA_REG6C 0x6C // AcpiPm2CntBlk
-#define SB_PMIOA_REG6E 0x6E // AcpiPmaCntBlk
-#define SB_PMIOA_REG74 0x74 // AcpiConfig
-#define SB_PMIOA_REG78 0x78 // WakeIoAddr
-#define SB_PMIOA_REG7A 0x7A // HaltCountEn
-#define SB_PMIOA_REG7C 0x7C // C1eWrPortAdr
-#define SB_PMIOA_REG7E 0x7E // CStateEn
-#define SB_PMIOA_REG80 0x80 // BreakEvent
-#define SB_PMIOA_REG84 0x84 // AutoArbEn
-#define SB_PMIOA_REG88 0x88 // CStateControl
-#define SB_PMIOA_REG8C 0x8C // StpClkHoldTime
-#define SB_PMIOA_REG8E 0x8E // PopUpEndTime
-#define SB_PMIOA_REG90 0x90 // C4Control
-#define SB_PMIOA_REG94 0x94 // CStateTiming0
-#define SB_PMIOA_REG98 0x98 // CStateTiming1
-#define SB_PMIOA_REG9C 0x9C // C2Count
-#define SB_PMIOA_REG9D 0x9D // C3Count
-#define SB_PMIOA_REG9E 0x9E // C4Count
-#define SB_PMIOA_REGA0 0xA0 // MessageCState
-#define SB_PMIOA_REGA4 0xA4 //
-#define SB_PMIOA_REGA8 0xA8 // TrafficMonitorIdleTime
-#define SB_PMIOA_REGAA 0xAA // TrafficMonitorIntTime
-#define SB_PMIOA_REGAC 0xAC // TrafficMonitorTrafficCount
-#define SB_PMIOA_REGAE 0xAE // TrafficMonitorIntrCount
-#define SB_PMIOA_REGB0 0xB0 // TrafficMonitorTimeTick
-#define SB_PMIOA_REGB4 0xB4 // FidVidControl
-#define SB_PMIOA_REGB6 0xB6 // TPRESET1
-#define SB_PMIOA_REGB7 0xB7 // Tpreset1b
-#define SB_PMIOA_REGB8 0xB8 // TPRESET2
-#define SB_PMIOA_REGB9 0xB9 // Test0
-#define SB_PMIOA_REGBA 0xBA // S_StateControl
-#define SB_PMIOA_REGBC 0xBC // ThrottlingControl
-#define SB_PMIOA_REGBE 0xBE // ResetControl
-#define SB_PMIOA_REGBF 0xBF // ResetControl
-#define SB_PMIOA_REGC0 0xC0 // S5Status
-#define SB_PMIOA_REGC2 0xC2 // ResetStatus
-#define SB_PMIOA_REGC4 0xC4 // ResetCommand
-#define SB_PMIOA_REGC5 0xC5 // CF9Shadow
-#define SB_PMIOA_REGC6 0xC6 // HTControl
-#define SB_PMIOA_REGC8 0xC8 // Misc
-#define SB_PMIOA_REGCC 0xCC // IoDrvSth
-#define SB_PMIOA_REGD0 0xD0 // CLKRunEn
-#define SB_PMIOA_REGD2 0xD2 // PmioDebug
-#define SB_PMIOA_REGD6 0xD6 // IMCGating
-#define SB_PMIOA_REGD8 0xD8 // MiscIndex
-#define SB_PMIOA_REGD9 0xD9 // MiscData
-#define SB_PMIOA_REGDA 0xDA // SataConfig
-#define SB_PMIOA_REGDC 0xDC // HyperFlashConfig
-#define SB_PMIOA_REGDE 0xDE // ABConfig
-#define SB_PMIOA_REGE0 0xE0 // ABRegBar
-#define SB_PMIOA_REGE6 0xE6 // FcEn
-#define SB_PMIOA_REGEA 0xEA // PcibConfig
-#define SB_PMIOA_REGEB 0xEB // AzEn
-#define SB_PMIOA_REGEC 0xEC // LpcGating
-#define SB_PMIOA_REGED 0xED // UsbGating
-#define SB_PMIOA_REGEF 0xEF // UsbEnable
-#define SB_PMIOA_REGF0 0xF0 // UsbControl
-#define SB_PMIOA_REGF3 0xF3 // UsbDebug
-#define SB_PMIOA_REGF6 0xF6 // GecEn
-#define SB_PMIOA_REGF8 0xF8 // GecConfig
-#define SB_PMIOA_REGFC 0xFC // TraceMemoryEn
-
-//
-// SB800 SB MMIO Base (PMIO2)
-// offset : 0x400
-//
-#define SB_PMIO2_REG00 0x00 // Fan0InputControl
-#define SB_PMIO2_REG01 0x01 // Fan0Control
-#define SB_PMIO2_REG02 0x02 // Fan0Freq
-#define SB_PMIO2_REG03 0x03 // LowDuty0
-#define SB_PMIO2_REG04 0x04 // MidDuty0
-
-#define SB_PMIO2_REG10 0x00 // Fan1InputControl
-#define SB_PMIO2_REG11 0x01 // Fan1Control
-#define SB_PMIO2_REG12 0x02 // Fan1Freq
-#define SB_PMIO2_REG13 0x03 // LowDuty1
-#define SB_PMIO2_REG14 0x04 // MidDuty1
-
-#define SB_PMIO2_REG 0xFC // TraceMemoryEn
-
-
-//
-// SB800 SB MMIO Base (GPIO/IoMux)
-// offset : 0x100/0xD00
-//
-/*
-GPIO from 0 ~ 67, (GEVENT 0-23) 128 ~ 150, 160 ~ 226.
-*/
-#define SB_GPIO_REG00 0x00
-#define SB_GPIO_REG32 0x20
-#define SB_GPIO_REG33 0x21
-#define SB_GPIO_REG34 0x22
-#define SB_GPIO_REG35 0x23
-#define SB_GPIO_REG36 0x24
-#define SB_GPIO_REG37 0x25
-#define SB_GPIO_REG38 0x26
-#define SB_GPIO_REG39 0x27
-#define SB_GPIO_REG40 0x28
-#define SB_GPIO_REG41 0x29
-#define SB_GPIO_REG42 0x2A
-#define SB_GPIO_REG43 0x2B
-#define SB_GPIO_REG44 0x2C
-#define SB_GPIO_REG45 0x2D
-#define SB_GPIO_REG46 0x2E
-#define SB_GPIO_REG47 0x2F
-#define SB_GPIO_REG48 0x30
-#define SB_GPIO_REG49 0x31
-#define SB_GPIO_REG50 0x32
-#define SB_GPIO_REG51 0x33
-#define SB_GPIO_REG52 0x34
-#define SB_GPIO_REG53 0x35
-#define SB_GPIO_REG54 0x36
-#define SB_GPIO_REG55 0x37
-#define SB_GPIO_REG56 0x38
-#define SB_GPIO_REG57 0x39
-#define SB_GPIO_REG58 0x3A
-#define SB_GPIO_REG59 0x3B
-#define SB_GPIO_REG60 0x3C
-#define SB_GPIO_REG61 0x3D
-#define SB_GPIO_REG62 0x3E
-#define SB_GPIO_REG63 0x3F
-#define SB_GPIO_REG64 0x40
-#define SB_GPIO_REG65 0x41
-#define SB_GPIO_REG66 0x42
-#define SB_GPIO_REG67 0x43
-
-#define SB_GEVENT_REG00 0x60
-#define SB_GEVENT_REG01 0x61
-#define SB_GEVENT_REG02 0x62
-#define SB_GEVENT_REG03 0x63
-#define SB_GEVENT_REG04 0x64
-#define SB_GEVENT_REG05 0x65
-#define SB_GEVENT_REG06 0x66
-#define SB_GEVENT_REG07 0x67
-#define SB_GEVENT_REG08 0x68
-#define SB_GEVENT_REG09 0x69
-#define SB_GEVENT_REG10 0x6A
-#define SB_GEVENT_REG11 0x6B
-#define SB_GEVENT_REG12 0x6C
-#define SB_GEVENT_REG13 0x6D
-#define SB_GEVENT_REG14 0x6E
-#define SB_GEVENT_REG15 0x6F
-#define SB_GEVENT_REG16 0x70
-#define SB_GEVENT_REG17 0x71
-#define SB_GEVENT_REG18 0x72
-#define SB_GEVENT_REG19 0x73
-#define SB_GEVENT_REG20 0x74
-#define SB_GEVENT_REG21 0x75
-#define SB_GEVENT_REG22 0x76
-#define SB_GEVENT_REG23 0x77
-// S5-DOMAIN GPIO
-#define SB_GPIO_REG160 0xA0
-#define SB_GPIO_REG161 0xA1
-#define SB_GPIO_REG162 0xA2
-#define SB_GPIO_REG163 0xA3
-#define SB_GPIO_REG164 0xA4
-#define SB_GPIO_REG165 0xA5
-#define SB_GPIO_REG166 0xA6
-#define SB_GPIO_REG167 0xA7
-#define SB_GPIO_REG168 0xA8
-#define SB_GPIO_REG169 0xA9
-#define SB_GPIO_REG170 0xAA
-#define SB_GPIO_REG171 0xAB
-#define SB_GPIO_REG172 0xAC
-#define SB_GPIO_REG173 0xAD
-#define SB_GPIO_REG174 0xAE
-#define SB_GPIO_REG175 0xAF
-#define SB_GPIO_REG176 0xB0
-#define SB_GPIO_REG177 0xB1
-#define SB_GPIO_REG178 0xB2
-#define SB_GPIO_REG179 0xB3
-#define SB_GPIO_REG180 0xB4
-#define SB_GPIO_REG181 0xB5
-#define SB_GPIO_REG182 0xB6
-#define SB_GPIO_REG183 0xB7
-#define SB_GPIO_REG184 0xB8
-#define SB_GPIO_REG185 0xB9
-#define SB_GPIO_REG186 0xBA
-#define SB_GPIO_REG187 0xBB
-#define SB_GPIO_REG188 0xBC
-#define SB_GPIO_REG189 0xBD
-#define SB_GPIO_REG190 0xBE
-#define SB_GPIO_REG191 0xBF
-#define SB_GPIO_REG192 0xC0
-#define SB_GPIO_REG193 0xC1
-#define SB_GPIO_REG194 0xC2
-#define SB_GPIO_REG195 0xC3
-#define SB_GPIO_REG196 0xC4
-#define SB_GPIO_REG197 0xC5
-#define SB_GPIO_REG198 0xC6
-#define SB_GPIO_REG199 0xC7
-#define SB_GPIO_REG200 0xC8
-#define SB_GPIO_REG201 0xC9
-#define SB_GPIO_REG202 0xCA
-#define SB_GPIO_REG203 0xCB
-#define SB_GPIO_REG204 0xCC
-#define SB_GPIO_REG205 0xCD
-#define SB_GPIO_REG206 0xCE
-#define SB_GPIO_REG207 0xCF
-#define SB_GPIO_REG208 0xD0
-#define SB_GPIO_REG209 0xD1
-#define SB_GPIO_REG210 0xD2
-#define SB_GPIO_REG211 0xD3
-#define SB_GPIO_REG212 0xD4
-#define SB_GPIO_REG213 0xD5
-#define SB_GPIO_REG214 0xD6
-#define SB_GPIO_REG215 0xD7
-#define SB_GPIO_REG216 0xD8
-#define SB_GPIO_REG217 0xD9
-#define SB_GPIO_REG218 0xDA
-#define SB_GPIO_REG219 0xDB
-#define SB_GPIO_REG220 0xDC
-#define SB_GPIO_REG221 0xDD
-#define SB_GPIO_REG222 0xDE
-#define SB_GPIO_REG223 0xDF
-#define SB_GPIO_REG224 0xF0
-#define SB_GPIO_REG225 0xF1
-#define SB_GPIO_REG226 0xF2
-#define SB_GPIO_REG227 0xF3
-#define SB_GPIO_REG228 0xF4
-
-//
-// SB800 SB MMIO Base (SMBUS)
-// offset : 0xA00
-//
-#define SB_SMBUS_REG12 0x12 // I2CbusConfig
-
-//
-// SB800 SB MMIO Base (MISC)
-// offset : 0xE00
-//
-#define SB_MISC_REG00 0x00 // ClkCntrl0
-/*
-SB_MISC_REG00 EQU 000h
- ClkCntrl0 EQU 0FFFFFFFFh
-*/
-#define SB_MISC_REG04 0x04 // ClkCntrl1
-/*
-SB_MISC_REG04 EQU 004h
- ClkCntrl1 EQU 0FFFFFFFFh
-*/
-#define SB_MISC_REG08 0x08 // ClkCntrl2
-/*
-SB_MISC_REG08 EQU 008h
- ClkCntrl2 EQU 0FFFFFFFFh
-*/
-#define SB_MISC_REG0C 0x0C // ClkCntrl3
-/*
-SB_MISC_REG0C EQU 00Ch
- ClkCntrl3 EQU 0FFFFFFFFh
-*/
-#define SB_MISC_REG10 0x10 // ClkCntrl4
-/*
-SB_MISC_REG10 EQU 010h
- ClkCntrl4 EQU 0FFFFFFFFh
-*/
-#define SB_MISC_REG14 0x14 // ClkCntrl5
-/*
-SB_MISC_REG14 EQU 014h
- ClkCntrl5 EQU 0FFFFFFFFh
-*/
-#define SB_MISC_REG18 0x18 // ClkCntrl6
-/*
-SB_MISC_REG18 EQU 018h
- ClkCntrl6 EQU 0FFFFFFFFh
-*/
-#define SB_MISC_REG30 0x30 // OscFreqCounter
-/*
-SB_MISC_REG30 EQU 030h
- OscCounter EQU 0FFFFFFFFh ; The 32bit register shows the number of OSC clock per second.
-*/
-#define SB_MISC_REG34 0x34 // HpetClkPeriod
-/*
-SB_MISC_REG34 EQU 034h
- HpetClkPeriod EQU 0FFFFFFFFh ; default - 0x429B17Eh (14.31818M).
-*/
-#define SB_MISC_REG40 0x40 // MiscCntrl for clock only
-/*
-SB_MISC_REG40 EQU 040h
-*/
-
-#define SB_MISC_REG80 0x80 /**< SB_MISC_REG80
- * @par
- * StrapStatus [15.0] - SB800 chip Strap Status
- * @li <b>0001</b> - Not USED FWH
- * @li <b>0002</b> - Not USED LPC ROM
- * @li <b>0004</b> - EC enabled
- * @li <b>0008</b> - Reserved
- * @li <b>0010</b> - Internal Clock mode
- */
-
-#define ChipSysNotUseFWHRom 0x0001 // EcPwm3 pad
-#define ChipSysNotUseLpcRom 0x0002 // Inverted version from EcPwm2 pad (default - 1)
- // Note: Both EcPwm3 and EcPwm2 straps pins are used to select boot ROM type.
-#define ChipSysEcEnable 0x0004 // Enable Embedded Controller (EC)
-#define ChipSysBootFailTmrEn 0x0008 // Enable Watchdog function
-#define ChipSysIntClkGen 0x0010 // Select 25Mhz crystal clock or 100Mhz PCI-E clock **
-
-#define SB_MISC_REG84 0x84 // StrapOverride
-/*
-SB_MISC_REG84 EQU 084h
- Override FWHDisableStrap EQU BIT0 ; Override FWHDiableStrap value from external pin.
- Override UseLpcRomStrap EQU BIT1 ; Override UseLpcRomStrap value from external pin.
- Override EcEnableStrap EQU BIT2 ; Override EcEnableStrap value from external pin.
- Override BootFailTmrEnStrap EQU BIT3 ; Override BootFailTmrEnStrap value from external pin.
- Override DefaultModeStrap EQU BIT5 ; Override DefaultModeStrap value from external pin.
- Override I2CRomStrap EQU BIT7 ; Override I2CRomStrap value from external pin.
- Override ILAAutorunEnBStrap EQU BIT8 ; Override ILAAutorunEnBStrap value from external pin.
- Override FcPllBypStrap EQU BIT9 ; Override FcPllBypStrap value from external pin.
- Override PciPllBypStrap EQU BIT10 ; Override PciPllBypStrap value from external pin.
- Override ShortResetStrap EQU BIT11 ; Override ShortResetStrap value from external pin.
- Override FastBif2ClkStrap EQU BIT13 ; Override FastBif2ClkStrap value from external pin'
- PciRomBootStrap EQU BIT15 ; Override PCI Rom Boot Strap value from external pin ?? Not match 0x80 reg ??
- BlinkSlowModestrap EQU BIT16 ; Override Blink Slow mode (100Mhz) from external pin'
- ClkGenStrap EQU BIT17 ; Override CLKGEN from external pin.
- BIF_GEN2_COMPL_Strap EQU BIT18 ; Override BIF_ GEN2_COMPLIANCE strap from external pin.
- StrapOverrideEn EQU BIT31 ; Enable override strapping feature.
-*/
-#define SB_MISC_REGC0 0xC0 // CPU_Pstate0
-/*
-SB_MISC_REGC0 EQU 0C0h
- Core0_PState EQU BIT0+BIT1+BIT2 ; 000: P0 001: P1 010: P2 011: P3 100: P4 101: P5 110: P6 111: P7
- Core1_PState EQU BIT4+BIT5+BIT6
- Core2_PState EQU BIT8+BIT9+BIT10
- Core3_PState EQU BIT12+BIT13+BIT14
- Core4_PState EQU BIT16++BIT17+BIT18
- Core5_PState EQU BIT20+BIT21+BIT22
- Core6_PState EQU BIT24+BIT25+BIT26
- Core7_PState EQU BIT28+BIT29+BIT30
-*/
-#define SB_MISC_REGC4 0xC4 // CPU_Pstate1
-/*
-SB_MISC_REGC4 EQU 0C4h
- Core8_PState EQU BIT0+BIT1+BIT2 ; 000: P0 001: P1 010: P2 011: P3 100: P4 101: P5 110: P6 111: P7
- Core9_PState EQU BIT4+BIT5+BIT6
- Core10_PState EQU BIT8+BIT9+BIT10
- Core11_PState EQU BIT12+BIT13+BIT14
- Core12_PState EQU BIT16++BIT17+BIT18
- Core13_PState EQU BIT20+BIT21+BIT22
- Core14_PState EQU BIT24+BIT25+BIT26
- Core15_PState EQU BIT28+BIT29+BIT30
-*/
-#define SB_MISC_REGD0 0xD0 // CPU_Cstate0
-/*
-SB_MISC_REGD0 EQU 0D0h
- Core0_CState EQU BIT0+BIT1+BIT2 ; 000: C0 001: C1 010: C2 011: C3 100: C4 101: C5 110: C6 111: C7
- Core1_CState EQU BIT4+BIT5+BIT6
- Core2_CState EQU BIT8+BIT9+BIT10
- Core3_CState EQU BIT12+BIT13+BIT14
- Core4_CState EQU BIT16++BIT17+BIT18
- Core5_CState EQU BIT20+BIT21+BIT22
- Core6_CState EQU BIT24+BIT25+BIT26
- Core7_CState EQU BIT28+BIT29+BIT30
-*/
-#define SB_MISC_REGD4 0xD4 // CPU_Cstate1
-/*
-SB_MISC_REGD4 EQU 0D4h
- Core8_CState EQU BIT0+BIT1+BIT2 ; 000: C0 001: C1 010: C2 011: C3 100: C4 101: C5 110: C6 111: C7
- Core9_CState EQU BIT4+BIT5+BIT6
- Core10_CState EQU BIT8+BIT9+BIT10
- Core11_CState EQU BIT12+BIT13+BIT14
- Core12_CState EQU BIT16++BIT17+BIT18
- Core13_CState EQU BIT20+BIT21+BIT22
- Core14_CState EQU BIT24+BIT25+BIT26
- Core15_CState EQU BIT28+BIT29+BIT30
-*/
-#define SB_MISC_REGF0 0xF0 // SataPortSts ?? EC touch only
-/*
-SB_MISC_REGF0 EQU 0F0h
- Port0Sts EQU BIT0 ; The selected status of Port 0.
- Port1Sts EQU BIT1 ; The selected status of Port 1
- Port2Sts EQU BIT2 ; The selected status of Port 2.
- Port3Sts EQU BIT3 ; The selected status of Port 3
- Port4Sts EQU BIT4 ; The selected status of Port 4.
- Port5Sts EQU BIT5 ; The selected status of Port 5
- SataPortSel EQU BIT24+BIT25 ; 00 - Select "led" for Port 0 to 5
- ; 01 - Select "delete" for Port 0 to 5
- ; 10 - Select "err" for Port 0 to 5
- ; 11 - Select "led" for Port 0 to 5
-*/
-
-
-
-#define SB_RTC_REG00 0x00 // Seconds - RW
-#define SB_RTC_REG01 0x01 // Seconds Alarm - RW
-#define SB_RTC_REG02 0x02 // Minutes - RW
-#define SB_RTC_REG03 0x03 // Minutes Alarm - RW
-#define SB_RTC_REG04 0x04 // ours - RW
-#define SB_RTC_REG05 0x05 // ours Alarm- RW
-#define SB_RTC_REG06 0x06 // Day of Week - RW
-#define SB_RTC_REG07 0x07 // Date of Mont - RW
-#define SB_RTC_REG08 0x08 // Mont - RW
-#define SB_RTC_REG09 0x09 // Year - RW
-#define SB_RTC_REG0A 0x0A // Register A - RW
-#define SB_RTC_REG0B 0x0B // Register B - RW
-#define SB_RTC_REG0C 0x0C // Register C - R
-#define SB_RTC_REG0D 0x0D // DateAlarm - RW
-#define SB_RTC_REG32 0x32 // AltCentury - RW
-#define SB_RTC_REG48 0x48 // Century - RW
-#define SB_RTC_REG50 0x50 // Extended RAM Address Port - RW
-#define SB_RTC_REG53 0x53 // Extended RAM Data Port - RW
-#define SB_RTC_REG7E 0x7E // RTC Time Clear - RW
-#define SB_RTC_REG7F 0x7F // RTC RAM Enable - RW
-
-#define SB_ECMOS_REG00 0x00 // scratch - reg
-//;BIT0=0 AsicDebug is enabled
-//;BIT1=0 SLT S3 runs
-#define SB_ECMOS_REG01 0x01
-#define SB_ECMOS_REG02 0x02
-#define SB_ECMOS_REG03 0x03
-#define SB_ECMOS_REG04 0x04
-#define SB_ECMOS_REG05 0x05
-#define SB_ECMOS_REG06 0x06
-#define SB_ECMOS_REG07 0x07
-#define SB_ECMOS_REG08 0x08 // save 32BIT Physical address of Config structure
-#define SB_ECMOS_REG09 0x09
-#define SB_ECMOS_REG0A 0x0A
-#define SB_ECMOS_REG0B 0x0B
-
-#define SB_ECMOS_REG0C 0x0C //;save MODULE_ID
-#define SB_ECMOS_REG0D 0x0D //;Reserve for NB
-
-#define SB_IOMAP_REG00 0x000 // Dma_C 0
-#define SB_IOMAP_REG02 0x002 // Dma_C 1
-#define SB_IOMAP_REG04 0x004 // Dma_C 2
-#define SB_IOMAP_REG06 0x006 // Dma_C 3
-#define SB_IOMAP_REG08 0x008 // Dma_Status
-#define SB_IOMAP_REG09 0x009 // Dma_WriteRest
-#define SB_IOMAP_REG0A 0x00A // Dma_WriteMask
-#define SB_IOMAP_REG0B 0x00B // Dma_WriteMode
-#define SB_IOMAP_REG0C 0x00C // Dma_Clear
-#define SB_IOMAP_REG0D 0x00D // Dma_MasterClr
-#define SB_IOMAP_REG0E 0x00E // Dma_ClrMask
-#define SB_IOMAP_REG0F 0x00F // Dma_AllMask
-#define SB_IOMAP_REG20 0x020 // IntrCntrlReg1
-#define SB_IOMAP_REG21 0x021 // IntrCntrlReg2
-#define SB_IOMAP_REG40 0x040 // TimerC0
-#define SB_IOMAP_REG41 0x041 // TimerC1
-#define SB_IOMAP_REG42 0x042 // TimerC2
-#define SB_IOMAP_REG43 0x043 // Tmr1CntrlWord
-#define SB_IOMAP_REG61 0x061 // Nmi_Status
-#define SB_IOMAP_REG70 0x070 // Nmi_Enable
-#define SB_IOMAP_REG71 0x071 // RtcDataPort
-#define SB_IOMAP_REG72 0x072 // AlternatRtcAddrPort
-#define SB_IOMAP_REG73 0x073 // AlternatRtcDataPort
-#define SB_IOMAP_REG80 0x080 // Dma_Page_Reserved0
-#define SB_IOMAP_REG81 0x081 // Dma_PageC2
-#define SB_IOMAP_REG82 0x082 // Dma_PageC3
-#define SB_IOMAP_REG83 0x083 // Dma_PageC1
-#define SB_IOMAP_REG84 0x084 // Dma_Page_Reserved1
-#define SB_IOMAP_REG85 0x085 // Dma_Page_Reserved2
-#define SB_IOMAP_REG86 0x086 // Dma_Page_Reserved3
-#define SB_IOMAP_REG87 0x087 // Dma_PageC0
-#define SB_IOMAP_REG88 0x088 // Dma_Page_Reserved4
-#define SB_IOMAP_REG89 0x089 // Dma_PageC6
-#define SB_IOMAP_REG8A 0x08A // Dma_PageC7
-#define SB_IOMAP_REG8B 0x08B // Dma_PageC5
-#define SB_IOMAP_REG8C 0x08C // Dma_Page_Reserved5
-#define SB_IOMAP_REG8D 0x08D // Dma_Page_Reserved6
-#define SB_IOMAP_REG8E 0x08E // Dma_Page_Reserved7
-#define SB_IOMAP_REG8F 0x08F // Dma_Refres
-#define SB_IOMAP_REG92 0x092 // FastInit
-#define SB_IOMAP_REGA0 0x0A0 // IntrCntrl2Reg1
-#define SB_IOMAP_REGA1 0x0A1 // IntrCntrl2Reg2
-#define SB_IOMAP_REGC0 0x0C0 // Dma2_C4Addr
-#define SB_IOMAP_REGC2 0x0C2 // Dma2_C4Cnt
-#define SB_IOMAP_REGC4 0x0C4 // Dma2_C5Addr
-#define SB_IOMAP_REGC6 0x0C6 // Dma2_C5Cnt
-#define SB_IOMAP_REGC8 0x0C8 // Dma2_C6Addr
-#define SB_IOMAP_REGCA 0x0CA // Dma2_C6Cnt
-#define SB_IOMAP_REGCC 0x0CC // Dma2_C7Addr
-#define SB_IOMAP_REGCE 0x0CE // Dma2_C7Cnt
-#define SB_IOMAP_REGD0 0x0D0 // Dma_Status
-#define SB_IOMAP_REGD2 0x0D2 // Dma_WriteRest
-#define SB_IOMAP_REGD4 0x0D4 // Dma_WriteMask
-#define SB_IOMAP_REGD6 0x0D6 // Dma_WriteMode
-#define SB_IOMAP_REGD8 0x0D8 // Dma_Clear
-#define SB_IOMAP_REGDA 0x0DA // Dma_Clear
-#define SB_IOMAP_REGDC 0x0DC // Dma_ClrMask
-#define SB_IOMAP_REGDE 0x0DE // Dma_ClrMask
-#define SB_IOMAP_REGF0 0x0F0 // NCP_Error
-#define SB_IOMAP_REG40B 0x040B // DMA1_Extend
-#define SB_IOMAP_REG4D0 0x04D0 // IntrEdgeControl
-#define SB_IOMAP_REG4D6 0x04D6 // DMA2_Extend
-#define SB_IOMAP_REGC00 0x0C00 // Pci_Intr_Index
-#define SB_IOMAP_REGC01 0x0C01 // Pci_Intr_Data
-#define SB_IOMAP_REGC14 0x0C14 // Pci_Error
-#define SB_IOMAP_REGC50 0x0C50 // CMIndex
-#define SB_IOMAP_REGC51 0x0C51 // CMData
-#define SB_IOMAP_REGC52 0x0C52 // GpmPort
-#define SB_IOMAP_REGC6F 0x0C6F // Isa_Misc
-#define SB_IOMAP_REGCD0 0x0CD0 // PMio2_Index
-#define SB_IOMAP_REGCD1 0x0CD1 // PMio2_Data
-#define SB_IOMAP_REGCD4 0x0CD4 // BIOSRAM_Index
-#define SB_IOMAP_REGCD5 0x0CD5 // BIOSRAM_Data
-#define SB_IOMAP_REGCD6 0x0CD6 // PM_Index
-#define SB_IOMAP_REGCD7 0x0CD7 // PM_Data
-#define SB_IOMAP_REGCF9 0x0CF9 // CF9Rst reg
-
-
-#define SB_SPI_MMIO_REG00 0x00 //SPI_
-#define SB_SPI_MMIO_REG0C 0x0C //SPI_Cntrl1 Register
-
-#define AMD_NB_REG78 0x78
-#define AMD_NB_SCRATCH AMD_NB_REG78
-#define MailBoxPort 0x3E
-
-// GPP Link Configuration
-#define GPP_CFGMODE_X4000 0x0
-#define GPP_CFGMODE_X2200 0x2
-#define GPP_CFGMODE_X2110 0x3
-#define GPP_CFGMODE_X1111 0x4
-
-#define MAX_TRAINING_RETRY 0x4000
-#define MAX_GPP_RESETS 8 //lx-temp to confirm with jason
-
-
-#pragma pack (pop)
-
diff --git a/src/vendorcode/amd/cimx/sb800/SBCMN.c b/src/vendorcode/amd/cimx/sb800/SBCMN.c deleted file mode 100644 index f485169672..0000000000 --- a/src/vendorcode/amd/cimx/sb800/SBCMN.c +++ /dev/null @@ -1,1056 +0,0 @@ -/**
- * @file
- *
- * Southbridge Initial routine
- *
- *
- *
- * @xrefitem bom "File Content Label" "Release Content"
- * @e project: CIMx-SB
- * @e sub-project:
- * @e \$Revision:$ @e \$Date:$
- *
- */
-/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-#include "SBPLATFORM.h"
-//
-// Declaration of local functions
-//
-
-VOID abcfgTbl (IN ABTBLENTRY* pABTbl);
-
-/**
- * sbUsbPhySetting - USB Phy Calibration Adjustment
- *
- *
- * @param[in] Value Controller PCI config address (bus# + device# + function#)
- *
- */
-VOID sbUsbPhySetting (IN UINT32 Value);
-
-
-/*--------------------------- Documentation Pages ---------------------------*/
-/**
- * @page LegacyInterfaceCalls Legacy Interface Calls
- * <TD>@subpage SB_POWERON_INIT_Page "SB_POWERON_INIT"</TD><TD></TD>
- * <TD>@subpage SB_BEFORE_PCI_INIT_Page "SB_BEFORE_PCI_INIT"</TD><TD></TD>
- * <TD>@subpage SB_AFTER_PCI_INIT_Page "SB_AFTER_PCI_INIT"</TD><TD></TD>
- * <TD>@subpage SB_LATE_POST_INIT_Page "SB_LATE_POST_INIT"</TD><TD></TD>
- * <TD>@subpage SB_BEFORE_PCI_RESTORE_INIT_Page "SB_BEFORE_PCI_RESTORE_INIT"</TD><TD></TD>
- * <TD>@subpage SB_AFTER_PCI_RESTORE_INIT_Page "SB_AFTER_PCI_RESTORE_INIT"</TD><TD></TD>
- * <TD>@subpage SB_SMM_SERVICE_Page "SB_SMM_SERVICE"</TD><TD></TD>
- * <TD>@subpage SB_SMM_ACPION_Page "SB_SMM_ACPION"</TD><TD></TD>
- *
- * @page LegacyInterfaceCallOuts Legacy Interface CallOuts
- * <TD>@subpage CB_SBGPP_RESET_ASSERT_Page CB_SBGPP_RESET_ASSERT
- * <TD>@subpage CB_SBGPP_RESET_DEASSERT_Page CB_SBGPP_RESET_DEASSERT
- *
-*/
-
-/**
- * sbEarlyPostByteInitTable - PCI device registers initial during early POST.
- *
- */
-const static REG8MASK sbEarlyPostByteInitTable[] =
-{
- // SMBUS Device (Bus 0, Dev 20, Func 0)
- {0x00, SMBUS_BUS_DEV_FUN, 0},
- {SB_CFG_REG10, 0X00, (SBCIMx_Version & 0xFF)}, //Program the version information
- {SB_CFG_REG11, 0X00, (SBCIMx_Version >> 8)},
- {0xFF, 0xFF, 0xFF},
-
- // IDE Device (Bus 0, Dev 20, Func 1)
- {0x00, IDE_BUS_DEV_FUN, 0},
- {SB_IDE_REG62 + 1, ~BIT0, BIT5}, // Enabling IDE Explicit Pre-Fetch IDE PCI Config 0x62[8]=0
- // Allow MSI capability of IDE controller to be visible. IDE PCI Config 0x62[13]=1
- {0xFF, 0xFF, 0xFF},
-
- // Azalia Device (Bus 0, Dev 20, Func 2)
- {0x00, AZALIA_BUS_DEV_FUN, 0},
- {SB_AZ_REG4C, ~BIT0, BIT0},
- {0xFF, 0xFF, 0xFF},
-
- // LPC Device (Bus 0, Dev 20, Func 3)
- {0x00, LPC_BUS_DEV_FUN, 0},
- {SB_LPC_REG40, ~BIT2, BIT2}, // RPR 1.1 Enabling LPC DMA Function 0x40[2]=1b 0x78[0]=0b
- {SB_LPC_REG78, ~BIT0, 00}, // RPR 1.1 Enabling LPC DMA Function 0x40[2]=1b 0x78[0]=0b
- {SB_LPC_REG78, ~BIT1, 00}, // Disables MSI capability
- {SB_LPC_REGBB, ~BIT0, BIT0 + BIT3 + BIT4 + BIT5}, // Enabled SPI Prefetch from HOST.
- {0xFF, 0xFF, 0xFF},
-
- // PCIB Bridge (Bus 0, Dev 20, Func 4)
- {0x00, PCIB_BUS_DEV_FUN, 0},
- {SB_PCIB_REG40, 0xFF, BIT5}, // RPR PCI-bridge Subtractive Decode
- {SB_PCIB_REG4B, 0xFF, BIT7}, //
- {SB_PCIB_REG66, 0xFF, BIT4}, // RPR Enabling One-Prefetch-Channel Mode, PCIB_PCI_config 0x64 [20]
- {SB_PCIB_REG65, 0xFF, BIT7}, // RPR proper operation of CLKRUN#.
- {SB_PCIB_REG0D, 0x00, 0x40}, // Setting Latency Timers to 0x40, Enables the PCIB to retain ownership
- {SB_PCIB_REG1B, 0x00, 0x40}, // of the bus on the Primary side and on the Secondary side when GNT# is deasserted.
- {SB_PCIB_REG66 + 1, 0xFF, BIT1}, // RPR Enable PCI bus GNT3#..
- {0xFF, 0xFF, 0xFF},
-
- // SATA Device (Bus 0, Dev 17, Func 0)
- {0x00, SATA_BUS_DEV_FUN, 0},
- {SB_SATA_REG44, 0xff, BIT0}, // Enables the SATA watchdog timer register prior to the SATA BIOS post
- {SB_SATA_REG44 + 2, 0, 0x20}, // RPR 8.12 SATA PCI Watchdog timer setting
- // [SB01923] Set timer out to 0x20 to fix IDE to SATA Bridge dropping drive issue.
- {0xFF, 0xFF, 0xFF},
-};
-
-
-/**
- * sbPmioEPostInitTable - Southbridge ACPI MMIO initial during POST.
- *
- */
-const static AcpiRegWrite sbPmioEPostInitTable[] =
-{
- // HPET workaround
- {PMIO_BASE >> 8, SB_PMIOA_REG54 + 3, 0xFC, BIT0 + BIT1},
- {PMIO_BASE >> 8, SB_PMIOA_REG54 + 2, 0x7F, BIT7},
- {PMIO_BASE >> 8, SB_PMIOA_REG54 + 2, 0x7F, 0x00},
- // End of HPET workaround
- // Enable SB800 A12 ACPI bits at PMIO 0xC0 [30,10:3]
- // ClrAllStsInThermalEvent 3 Set to 1 to allow ASF remote power down/power cycle, Thermal event, Fan slow event to clear all the Gevent status and enabled bits. The bit should be set to 1 all the time.
- // UsbGoodClkDlyEn 4 Set to 1 to delay de-assertion of Usb clk by 6 Osc clk. The bit should be set to 1 all the time.
- // ForceNBCPUPwr 5 Set to 1 to force CPU pwrGood to be toggled along with NB pwrGood.
- // MergeUsbPerReq 6 Set to 1 to merge usb perdical traffic into usb request as one of break event.
- // IMCWatchDogRstEn 7 Set to 1 to allow IMC watchdog timer to reset entire acpi block. The bit should be set to 1 when IMC is enabled.
- // GeventStsFixEn 8 1: Gevent status is not reset by its enable bit. 0: Gevent status is reset by its enable bit.
- // PmeTimerFixEn 9 Set to 1 to reset Pme Timer when going to sleep state.
- // UserRst2EcEn 10 Set to 1 to route user reset event to Ec. The bit should be set to 1 when IMC is enabled.
- // Smbus0ClkSEn 30 Set to 1 to enable SMBus0 controller clock stretch support.
- {PMIO_BASE >> 8, SB_PMIOA_REGC4, ~(BIT2 + BIT4), BIT2 + BIT4},
- {PMIO_BASE >> 8, SB_PMIOA_REGC0, 0, 0xF9},
- // PM_reg xC1 [3] = 1b, per RPR 2.7 CPU PwrGood Setting
- {PMIO_BASE >> 8, SB_PMIOA_REGC0 + 1, 0x04, 0x0B},
- // RtcSts 19-17 RTC_STS set only in Sleep State.
- // GppPme 20 Set to 1 to enable PME request from SB GPP.
- // Pcireset 22 Set to 1 to allow SW to reset PCIe.
- {PMIO_BASE >> 8, SB_PMIOA_REGC2, 0x20, 0x58},
- {PMIO_BASE >> 8, SB_PMIOA_REGC2 + 1, 0, 0x40},
-
- //Item Id: SB02037: RTC_STS should be set in S state
- //set PMIO 0xC0 [19:16] Set to 1110 to allow RTC_STS to be set only in non_G0 state.
- //{PMIO_BASE >> 8, SB_PMIOA_REGC2, (UINT8)~(0x0F), 0x0E},
-
- //Item Id: SB02034
- //Title: SB GPP NIC auto wake at second time sleep
- //set PMIO 0xC4 bit 2 to 1 then set PMIO 0xC0 bit 20 to 1 to enable fix for SB02034
-
- {PMIO_BASE >> 8, SB_PMIOA_REGC2, ~(BIT4), BIT4},
-
- //{GPIO_BASE >> 8, SB_GPIO_REG62 , 0x00, 0x4E},
- {PMIO_BASE >> 8, SB_PMIOA_REG74, 0x00, BIT0 + BIT1 + BIT2 + BIT4},
- {PMIO_BASE >> 8, SB_PMIOA_REGDE + 1, ~(BIT0 + BIT1), BIT0 + BIT1},
- {PMIO_BASE >> 8, SB_PMIOA_REGDE, ~BIT4, BIT4},
- {PMIO_BASE >> 8, SB_PMIOA_REGBA, ~BIT3, BIT3},
- {PMIO_BASE >> 8, SB_PMIOA_REGBA + 1, ~BIT6, BIT6},
- {PMIO_BASE >> 8, SB_PMIOA_REGBC, ~BIT1, BIT1},
- {PMIO_BASE >> 8, SB_PMIOA_REGED, ~(BIT0 + BIT1), 0},
- //RPR Hiding Flash Controller PM_IO 0xDC[7] = 0x0 & PM_IO 0xDC [1:0]=0x01
- {PMIO_BASE >> 8, SB_PMIOA_REGDC, 0x7C, BIT0},
- // RPR Turning off FC clock
- {MISC_BASE >> 8, SB_MISC_REG40 + 1, ~(BIT3 + BIT2), BIT3 + BIT2},
- {MISC_BASE >> 8, SB_MISC_REG40 + 2, ~BIT0, BIT0},
- {SMI_BASE >> 8, SB_SMI_Gevent0, 0, 29},
- {SMI_BASE >> 8, SB_SMI_Gevent1, 0, 1},
- {SMI_BASE >> 8, SB_SMI_Gevent2, 0, 29},
- {SMI_BASE >> 8, SB_SMI_Gevent3, 0, 29},
- {SMI_BASE >> 8, SB_SMI_Gevent4, 0, 4},
- {SMI_BASE >> 8, SB_SMI_Gevent5, 0, 5},
- {SMI_BASE >> 8, SB_SMI_Gevent6, 0, 6},
- {SMI_BASE >> 8, SB_SMI_Gevent7, 0, 29},
-
- {SMI_BASE >> 8, SB_SMI_Gevent9, 0, 29},
- {SMI_BASE >> 8, SB_SMI_Gevent10, 0, 29},
- {SMI_BASE >> 8, SB_SMI_Gevent11, 0, 29},
- {SMI_BASE >> 8, SB_SMI_Gevent12, 0, 29},
- {SMI_BASE >> 8, SB_SMI_Gevent13, 0, 29},
- {SMI_BASE >> 8, SB_SMI_Gevent14, 0, 29},
- {SMI_BASE >> 8, SB_SMI_Gevent15, 0, 29},
- {SMI_BASE >> 8, SB_SMI_Gevent16, 0, 29},
- {SMI_BASE >> 8, SB_SMI_Gevent17, 0, 29},
- {SMI_BASE >> 8, SB_SMI_Gevent18, 0, 29},
- {SMI_BASE >> 8, SB_SMI_Gevent19, 0, 29},
- {SMI_BASE >> 8, SB_SMI_Gevent20, 0, 29},
- {SMI_BASE >> 8, SB_SMI_Gevent21, 0, 29},
- {SMI_BASE >> 8, SB_SMI_Gevent22, 0, 29},
- {SMI_BASE >> 8, SB_SMI_Gevent23, 0, 29},
-//
- {SMI_BASE >> 8, SB_SMI_Usbwakup0, 0, 11},
- {SMI_BASE >> 8, SB_SMI_Usbwakup1, 0, 11},
- {SMI_BASE >> 8, SB_SMI_Usbwakup2, 0, 11},
- {SMI_BASE >> 8, SB_SMI_Usbwakup3, 0, 11},
- {SMI_BASE >> 8, SB_SMI_IMCGevent0, 0, 12},
- {SMI_BASE >> 8, SB_SMI_IMCGevent1, 0, 29},
- {SMI_BASE >> 8, SB_SMI_FanThGevent, 0, 13},
- {SMI_BASE >> 8, SB_SMI_SBGppPme0, 0, 15},
- {SMI_BASE >> 8, SB_SMI_SBGppPme1, 0, 16},
- {SMI_BASE >> 8, SB_SMI_SBGppPme2, 0, 17},
- {SMI_BASE >> 8, SB_SMI_SBGppPme3, 0, 18},
- {SMI_BASE >> 8, SB_SMI_SBGppHp0, 0, 29},
- {SMI_BASE >> 8, SB_SMI_SBGppHp1, 0, 29},
- {SMI_BASE >> 8, SB_SMI_SBGppHp2, 0, 29},
- {SMI_BASE >> 8, SB_SMI_SBGppHp3, 0, 29},
- {SMI_BASE >> 8, SB_SMI_GecPme, 0, 19},
- {SMI_BASE >> 8, SB_SMI_CIRPme, 0, 23},
- {SMI_BASE >> 8, SB_SMI_Gevent8, 0, 26},
- {SMI_BASE >> 8, SB_SMI_AzaliaPme, 0, 27},
- {SMI_BASE >> 8, SB_SMI_SataGevent0, 0, 30},
- {SMI_BASE >> 8, SB_SMI_SataGevent1, 0, 31},
-
- {SMI_BASE >> 8, SB_SMI_WakePinGevent, 0, 29},
- {SMI_BASE >> 8, SB_SMI_ASFMasterIntr, 0, 29},
- {SMI_BASE >> 8, SB_SMI_ASFSlaveIntr, 0, 29},
-
-// {SMI_BASE >> 8, SB_SMI_REG04, ~BIT4, BIT4},
-// {SMI_BASE >> 8, SB_SMI_REG04 + 1, ~BIT0, BIT0},
-// {SMI_BASE >> 8, SB_SMI_REG04 + 2, ~BIT3, BIT3},
- {SMI_BASE >> 8, SB_SMI_REG08, ~BIT4, 0},
- {SMI_BASE >> 8, SB_SMI_REG08+3, ~BIT2, 0},
-// {SMI_BASE >> 8, SB_SMI_REG0C, ~BIT4, BIT4},
- {SMI_BASE >> 8, SB_SMI_REG0C + 2, ~BIT3, BIT3},
- {SMI_BASE >> 8, SB_SMI_TWARN, 0, 9},
- {SMI_BASE >> 8, SB_SMI_TMI, 0, 29},
- {0xFF, 0xFF, 0xFF, 0xFF},
-};
-
-/**
- * abTblEntry800 - AB-Link Configuration Table for SB800
- *
- */
-const static ABTBLENTRY abTblEntry800[] =
-{
- // RPR Enable downstream posted transactions to pass non-posted transactions.
- {ABCFG, SB_ABCFG_REG10090, BIT8 + BIT16, BIT8 + BIT16},
-
- // RPR Enable SB800 to issue memory read/write requests in the upstream direction.
- {AXCFG, SB_AB_REG04, BIT2, BIT2},
-
- // RPR Enabling IDE/PCIB Prefetch for Performance Enhancement
- // PCIB prefetch ABCFG 0x10060 [20] = 1 ABCFG 0x10064 [20] = 1
- {ABCFG, SB_ABCFG_REG10060, BIT20, BIT20}, // PCIB prefetch enable
- {ABCFG, SB_ABCFG_REG10064, BIT20, BIT20}, // PCIB prefetch enable
-
- // RPR Controls the USB OHCI controller prefetch used for enhancing performance of ISO out devices.
- // RPR Setting B-Link Prefetch Mode (ABCFG 0x80 [18:17] = 11)
- {ABCFG, SB_ABCFG_REG80, BIT0 + BIT17 + BIT18, BIT0 + BIT17 + BIT18},
-
- // RPR Enabled SMI ordering enhancement. ABCFG 0x90[21]
- // RPR USB Delay A-Link Express L1 State. ABCFG 0x90[17]
- {ABCFG, SB_ABCFG_REG90, BIT21 + BIT17, BIT21 + BIT17},
-
- // RPR Disable the credit variable in the downstream arbitration equation
- // RPR Register bit to qualify additional address bits into downstream register programming. (A12 BIT1 default is set)
- {ABCFG, SB_ABCFG_REG9C, BIT0, BIT0},
-
- // RPR Enabling Detection of Upstream Interrupts ABCFG 0x94 [20] = 1
- // ABCFG 0x94 [19:0] = cpu interrupt delivery address [39:20]
- {ABCFG, SB_ABCFG_REG94, BIT20, BIT20 + 0x00FEE},
-
- // RPR Programming cycle delay for AB and BIF clock gating
- // RPR Enable the AB and BIF clock-gating logic.
- // RPR Enable the A-Link int_arbiter enhancement to allow the A-Link bandwidth to be used more efficiently
- // RPR Enable the requester ID for upstream traffic. [16]: SB/NB link [17]: GPP
- {ABCFG, SB_ABCFG_REG10054, 0x00FFFFFF, 0x010407FF},
- {ABCFG, SB_ABCFG_REG98, 0xFFFF00FF, 0x00034700},
- {ABCFG, SB_ABCFG_REG54, 0x00FF0000, 0x00040000},
- // RPR Non-Posted Memory Write Support
- {AX_INDXC, SB_AX_INDXC_REG10, BIT9, BIT9},
- {ABCFG, 0, 0, (UINT8) 0xFF}, // This dummy entry is to clear ab index
- { (UINT8)0xFF, (UINT8)0xFF, (UINT8)0xFF, (UINT8)0xFF},
-};
-
-/**
- * SbPcieOrderRule - AB-Link Configuration Table for ablink Post Pass Np Downstream/Upstream Feature
- *
- */
-const static ABTBLENTRY SbPcieOrderRule[] =
-{
-// abPostPassNpDownStreamTbl
- {ABCFG, SB_ABCFG_REG10060, BIT31, BIT31},
- {ABCFG, SB_ABCFG_REG1009C, BIT4 + BIT5, BIT4 + BIT5},
- {ABCFG, SB_ABCFG_REG9C, BIT2 + BIT3 + BIT4 + BIT5 + BIT6 + BIT7, BIT2 + BIT3 + BIT4 + BIT5 + BIT6 + BIT7},
- {ABCFG, SB_ABCFG_REG90, BIT21 + BIT22 + BIT23, BIT21 + BIT22 + BIT23},
- {ABCFG, SB_ABCFG_REGF0, BIT6 + BIT5, BIT6 + BIT5},
- {AXINDC, SB_AX_INDXC_REG02, BIT9, BIT9},
- {ABCFG, SB_ABCFG_REG10090, BIT9 + BIT10 + BIT11 + BIT12, BIT9 + BIT10 + BIT11 + BIT12},
-// abPostPassNpUpStreamTbl
- {ABCFG, SB_ABCFG_REG58, BIT10, BIT10},
- {ABCFG, SB_ABCFG_REGF0, BIT3 + BIT4, BIT3 + BIT4},
- {ABCFG, SB_ABCFG_REG54, BIT1, BIT1},
- { (UINT8)0xFF, (UINT8)0xFF, (UINT8)0xFF, (UINT8)0xFF},
-};
-
-/**
- * commonInitEarlyBoot - Config Southbridge SMBUS/ACPI/IDE/LPC/PCIB.
- *
- * This settings should be done during S3 resume also
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-commonInitEarlyBoot (
- IN AMDSBCFG* pConfig
- )
-{
- UINT32 abValue;
- UINT16 dwTempVar;
- SB_CPUID_DATA CpuId;
- UINT8 cimNativepciesupport;
- UINT8 cimIrConfig;
- UINT8 Data;
-
- cimNativepciesupport = (UINT8) pConfig->NativePcieSupport;
- cimIrConfig = (UINT8) pConfig->IrConfig;
-#if SB_CIMx_PARAMETER == 0
- cimNativepciesupport = cimNativepciesupportDefault;
- cimIrConfig = cimIrConfigDefault;
-#endif
-
- //IR init Logical device 0x05
- if ( cimIrConfig ) {
- // Enable EC_PortActive
- RWPCI (((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4), AccWidthUint16 | S3_SAVE, 0xFFFE, BIT0);
- EnterEcConfig ();
- RWEC8 (0x07, 0x00, 0x05); //Select logical device 05, IR controller
- RWEC8 (0x60, 0x00, 0x05); //Set Base Address to 550h
- RWEC8 (0x61, 0x00, 0x50);
- RWEC8 (0x70, 0xF0, 0x05); //Set IRQ to 05h
- RWEC8 (0x30, 0x00, 0x01); //Enable logical device 5, IR controller
- Data = 0xAB;
- WriteIO (0x550, AccWidthUint8, &Data);
- ReadIO (0x551, AccWidthUint8, &Data);
- Data = ((Data & 0xFC ) | cimIrConfig);
- WriteIO (0x551, AccWidthUint8, &Data);
- ExitEcConfig ();
- Data = 0xA0; // EC APIC index
- WriteIO (SB_IOMAP_REGC00, AccWidthUint8, &Data);
- Data = 0x05; // IRQ5
- WriteIO (SB_IOMAP_REGC01, AccWidthUint8, &Data);
- } else {
- EnterEcConfig ();
- RWEC8 (0x07, 0x00, 0x05); //Select logical device 05, IR controller
- RWEC8 (0x30, 0x00, 0x00); //Disable logical device 5, IR controller
- ExitEcConfig ();
- }
-
-
- CpuidRead (0x01, &CpuId);
-
- //
- // SB CFG programming
- //
- //Make BAR registers of smbus visible.
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC8 + 1, AccWidthUint8, ~BIT6, 0);
- //Early post initialization of pci config space
- programPciByteTable ((REG8MASK*) FIXUP_PTR (&sbEarlyPostByteInitTable[0]), sizeof (sbEarlyPostByteInitTable) / sizeof (REG8MASK) );
- if ( pConfig->BuildParameters.SmbusSsid != NULL ) {
- RWPCI ((SMBUS_BUS_DEV_FUN << 16) + SB_CFG_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pConfig->BuildParameters.SmbusSsid);
- }
- //Make BAR registers of smbus invisible.
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC8 + 1, AccWidthUint8, ~BIT6, BIT6);
-
- //
- // LPC CFG programming
- //
- // SSID for LPC Controller
- if (pConfig->BuildParameters.LpcSsid != NULL ) {
- RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pConfig->BuildParameters.LpcSsid);
- }
- // LPC MSI
- if ( pConfig->BuildParameters.LpcMsi) {
- RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG78, AccWidthUint32 | S3_SAVE, ~BIT1, BIT1);
- }
-
- //
- // PCIB CFG programming
- //
- //Disable or Enable PCI Clks based on input
- RWPCI ((PCIB_BUS_DEV_FUN << 16) + SB_PCIB_REG42, AccWidthUint8 | S3_SAVE, ~(BIT5 + BIT4 + BIT3 + BIT2), ((pConfig->PciClks) & 0x0F) << 2 );
- RWPCI ((PCIB_BUS_DEV_FUN << 16) + SB_PCIB_REG4A, AccWidthUint8 | S3_SAVE, ~(BIT1 + BIT0), (pConfig->PciClks) >> 4 );
- // PCIB MSI
- if ( pConfig->BuildParameters.PcibMsi) {
- RWPCI ((PCIB_BUS_DEV_FUN << 16) + SB_PCIB_REG40, AccWidthUint8 | S3_SAVE, ~BIT3, BIT3);
- }
-
- //
- // AB CFG programming
- //
- // Read Arbiter address, Arbiter address is in PMIO 6Ch
- ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG6C, AccWidthUint16, &dwTempVar);
- RWIO (dwTempVar, AccWidthUint8, 0, 0); // Write 0 to enable the arbiter
-
- abLinkInitBeforePciEnum (pConfig); // Set ABCFG registers
- // AB MSI
- if ( pConfig->BuildParameters.AbMsi) {
- abValue = readAlink (SB_ABCFG_REG94 | (UINT32) (ABCFG << 29));
- abValue = abValue | BIT20;
- writeAlink (SB_ABCFG_REG94 | (UINT32) (ABCFG << 29), abValue);
- }
-
-
- //
- // SB Specific Function programming
- //
-
- // PCIE Native setting
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGBA + 1, AccWidthUint8, ~BIT14, 0);
- if ( pConfig->NativePcieSupport == 1) {
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG74 + 3, AccWidthUint8, ~(BIT3 + BIT1 + BIT0), BIT2 + BIT0);
- } else {
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG74 + 3, AccWidthUint8, ~(BIT3 + BIT1 + BIT0), BIT2);
- }
-
-#ifdef ACPI_SLEEP_TRAP
- // Set SLP_TYPE as SMI event
- RWMEM (ACPI_MMIO_BASE + SMI_BASE + SB_SMI_REGB0, AccWidthUint8, ~(BIT2 + BIT3), BIT2);
- // Disabled SLP function for S1/S3/S4/S5
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGBE, AccWidthUint8, ~BIT5, 0x00);
- // Set S state transition disabled (BIT0) force ACPI to send SMI message when writing to SLP_TYP Acpi register. (BIT1)
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG08 + 3, AccWidthUint8, ~(BIT0 + BIT1), BIT1);
- // Enabled Global Smi ( BIT7 clear as 0 to enable )
- RWMEM (ACPI_MMIO_BASE + SMI_BASE + SB_SMI_REG98 + 3 , AccWidthUint8, ~BIT7, 0x00);
-#endif
- if ( pConfig->SbUsbPll == 0) {
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF3, AccWidthUint8, 0, 0x20);
- }
- // Set Stutter timer settings
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG80 + 1, AccWidthUint8, ~(BIT3 + BIT4), BIT3 + BIT4);
- // Set LDTSTP# duration to 10us for HydraD CPU, or when HT link is 200MHz
- if ((pConfig->AnyHT200MhzLink) || ((CpuId.EAX_Reg & 0x00ff00f0) == 0x100080) || ((CpuId.EAX_Reg & 0x00ff00f0) == 0x100090) || ((CpuId.EAX_Reg & 0x00ff00f0) == 0x1000A0)) {
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG94, AccWidthUint8, 0, 0x0A);
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG80 + 3, AccWidthUint8 | S3_SAVE, 0xFE, 0x28);
- } else {
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG94, AccWidthUint8, 0, 0x01);
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG80 + 3, AccWidthUint8 | S3_SAVE, 0xFE, 0x20);
- }
-
- //PM_Reg 0x7A[15] (CountHaltMsgEn) should be set when C1e option is enabled
- //PM_Reg 0x7A[3:0] (NumOfCpu) should be set to 1h when C1e option is enabled
- //PM_Reg 0x80[13] has to set to 1 to enable Message C scheme.
- if (pConfig->MTC1e) {
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG7A, AccWidthUint16 | S3_SAVE, 0x7FF0, BIT15 + 1);
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG80 + 1, AccWidthUint8 | S3_SAVE, ~BIT5, BIT5);
- }
-
- programSbAcpiMmioTbl ((AcpiRegWrite *) (pConfig->OEMPROGTBL.OemProgrammingTablePtr_Ptr));
-}
-
-/**
- * abSpecialSetBeforePciEnum - Special setting ABCFG registers before PCI emulation.
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-abSpecialSetBeforePciEnum (
- IN AMDSBCFG* pConfig
- )
-{
- UINT32 abValue;
- abValue = readAlink (SB_ABCFG_REGC0 | (UINT32) (ABCFG << 29));
- abValue &= 0xf0;
- if ( pConfig->SbPcieOrderRule && abValue ) {
- abValue = readAlink (SB_RCINDXC_REG02 | (UINT32) (RCINDXC << 29));
- abValue = abValue | BIT9;
- writeAlink (SB_RCINDXC_REG02 | (UINT32) (RCINDXC << 29), abValue);
- }
-}
-
-VOID
-usbDesertPll (
- IN AMDSBCFG* pConfig
- )
-{
- if ( pConfig->SbUsbPll == 0) {
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF3, AccWidthUint8, 0, 0x00);
- }
-}
-
-/**
- * commonInitEarlyPost - Config Southbridge SMBUS/ACPI/IDE/LPC/PCIB.
- *
- * This settings might not program during S3 resume
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-commonInitEarlyPost (
- IN AMDSBCFG* pConfig
- )
-{
- UINT8 dbPortStatus;
- UINT8 cimSpreadSpectrum;
- UINT32 cimSpreadSpectrumType;
- AMDSBCFG* pTmp;
- pTmp = pConfig;
-
- cimSpreadSpectrum = pConfig->SpreadSpectrum;
- cimSpreadSpectrumType = pConfig->BuildParameters.SpreadSpectrumType;
-#if SB_CIMx_PARAMETER == 0
- cimSpreadSpectrum = cimSpreadSpectrumDefault;
- cimSpreadSpectrumType = cimSpreadSpectrumTypeDefault;
-#endif
- programSbAcpiMmioTbl ((AcpiRegWrite*) FIXUP_PTR (&sbPmioEPostInitTable[0]));
-
- // CallBackToOEM (PULL_UP_PULL_DOWN_SETTINGS, NULL, pConfig);
-
- if ( cimSpreadSpectrum ) {
- // Misc_Reg_40[25]=1 -> allow to change spread profile
- // Misc_Reg19=83 -> new spread profile
- // Misc_Reg[12:10]=9975be
- // Misc_Reg0B=91
- // Misc_Reg09=21
- // Misc_Misc_Reg_08[0]=1 -> enable spread
- RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x43, AccWidthUint8, ~BIT1, BIT1);
- RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x19, AccWidthUint8, 0, 0x83);
- getChipSysMode (&dbPortStatus);
- if ( ((dbPortStatus & ChipSysIntClkGen) != ChipSysIntClkGen) ) {
- RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x1A, AccWidthUint8, ~(BIT5 + BIT6 + BIT7), 0x80);
- }
-
- if ( cimSpreadSpectrumType == 0 ) {
- RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x12, AccWidthUint8, 0, 0x99);
- RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x11, AccWidthUint8, 0, 0x75);
- RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x10, AccWidthUint8, 0, 0xBE);
- RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x0B, AccWidthUint8, 0, 0x91);
- RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x09, AccWidthUint8, 0, 0x21);
- } else { // Spread profile for Ontario CPU related platform
- // This spread profile setting is for Ontario HDMI & DVI output from DP with -0.425%
- // Misc_Reg[12:10]=828FA8
- // Misc_Reg0B=11
- // Misc_Reg09=21
- // Misc_Reg10[25:24]=01b
- RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x12, AccWidthUint8, 0, 0x82);
- RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x11, AccWidthUint8, 0, 0x8F);
- RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x10, AccWidthUint8, 0, 0xA8);
- RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x0B, AccWidthUint8, 0, 0x11);
- RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x09, AccWidthUint8, 0, 0x21);
- RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x13, AccWidthUint8, 0xFC, 0x1);
- }
-
- RWMEM (ACPI_MMIO_BASE + MISC_BASE + SB_MISC_REG08, AccWidthUint8, 0xFE, 0x01);
- } else {
- RWMEM (ACPI_MMIO_BASE + MISC_BASE + SB_MISC_REG08, AccWidthUint8, 0xFE, 0x00);
- }
-
- // RPR PLL 100Mhz Reference Clock Buffer setting for internal clock generator mode
- getChipSysMode (&dbPortStatus);
- if ( ((dbPortStatus & ChipSysIntClkGen) == ChipSysIntClkGen) ) {
- RWMEM (ACPI_MMIO_BASE + MISC_BASE + SB_MISC_REG04 + 1, AccWidthUint8, ~BIT5, BIT5);
- }
-
- // Set ASF SMBUS master function enabled here (temporary)
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG28, AccWidthUint16 | S3_SAVE, ~(BIT0 + BIT2), BIT0 + BIT2);
-
- programSbAcpiMmioTbl ((AcpiRegWrite *) (pConfig->OEMPROGTBL.OemProgrammingTablePtr_Ptr));
-#ifndef NO_EC_SUPPORT
- // Software IMC enable
- if (((pConfig->BuildParameters.ImcEnableOverWrite == 1) && ((dbPortStatus & ChipSysEcEnable) == 0)) || ((pConfig->BuildParameters.ImcEnableOverWrite == 2) && ((dbPortStatus & ChipSysEcEnable) == ChipSysEcEnable))) {
- if (validateImcFirmware (pConfig)) {
- softwareToggleImcStrapping (pConfig);
- } else {
- CallBackToOEM (IMC_FIRMWARE_FAIL, 0, pConfig);
- }
- }
-#endif
-
-}
-/**
- * abLinkInitBeforePciEnum - Set ABCFG registers before PCI emulation.
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-abLinkInitBeforePciEnum (
- IN AMDSBCFG* pConfig
- )
-{
- UINT32 cimResetCpuOnSyncFlood;
- ABTBLENTRY *pAbTblPtr;
- AMDSBCFG* Temp;
-
- cimResetCpuOnSyncFlood = pConfig->ResetCpuOnSyncFlood;
-#if SB_CIMx_PARAMETER == 0
- cimResetCpuOnSyncFlood = cimResetCpuOnSyncFloodDefault;
-#endif
- Temp = pConfig;
- if ( pConfig->SbPcieOrderRule ) {
- pAbTblPtr = (ABTBLENTRY *) FIXUP_PTR (&SbPcieOrderRule[0]);
- abcfgTbl (pAbTblPtr);
- }
- pAbTblPtr = (ABTBLENTRY *) FIXUP_PTR (&abTblEntry800[0]);
- abcfgTbl (pAbTblPtr);
- if ( cimResetCpuOnSyncFlood ) {
- rwAlink (SB_ABCFG_REG10050 | (UINT32) (ABCFG << 29), ~BIT2, BIT2);
- }
-}
-
-/**
- * abcfgTbl - Program ABCFG by input table.
- *
- *
- * @param[in] pABTbl ABCFG config table.
- *
- */
-VOID
-abcfgTbl (
- IN ABTBLENTRY* pABTbl
- )
-{
- UINT32 ddValue;
-
- while ( (pABTbl->regType) != 0xFF ) {
- if ( pABTbl->regType > AXINDC ) {
- ddValue = pABTbl->regIndex | (pABTbl->regType << 29);
- writeAlink (ddValue, ((readAlink (ddValue)) & (0xFFFFFFFF^ (pABTbl->regMask))) | pABTbl->regData);
- } else {
- ddValue = 0x30 | (pABTbl->regType << 29);
- writeAlink (ddValue, pABTbl->regIndex);
- ddValue = 0x34 | (pABTbl->regType << 29);
- writeAlink (ddValue, ((readAlink (ddValue)) & (0xFFFFFFFF^ (pABTbl->regMask))) | pABTbl->regData);
- }
- ++pABTbl;
- }
-
- //Clear ALink Access Index
- ddValue = 0;
- WriteIO (ALINK_ACCESS_INDEX, AccWidthUint32 | S3_SAVE, &ddValue);
-}
-
-/**
- * commonInitLateBoot - Prepare Southbridge register setting to boot to OS.
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-commonInitLateBoot (
- IN AMDSBCFG* pConfig
- )
-{
- UINT8 dbValue;
- UINT32 ddVar;
- // We need to do the following setting in late post also because some bios core pci enumeration changes these values
- // programmed during early post.
- // RPR 4.5 Master Latency Timer
-
- dbValue = 0x40;
- WritePCI ((PCIB_BUS_DEV_FUN << 16) + SB_PCIB_REG0D, AccWidthUint8, &dbValue);
- WritePCI ((PCIB_BUS_DEV_FUN << 16) + SB_PCIB_REG1B, AccWidthUint8, &dbValue);
-
- //SB P2P AutoClock control settings.
- ddVar = (pConfig->PcibAutoClkCtrlHigh << 16) | (pConfig->PcibAutoClkCtrlLow);
- WritePCI ((PCIB_BUS_DEV_FUN << 16) + SB_PCIB_REG4C, AccWidthUint32, &ddVar);
- ddVar = (pConfig->PcibClkStopOverride);
- RWPCI ((PCIB_BUS_DEV_FUN << 16) + SB_PCIB_REG50, AccWidthUint16, 0x3F, (UINT16) (ddVar << 6));
-
- RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGBB, AccWidthUint8, 0xBF | S3_SAVE, BIT3 + BIT4 + BIT5);
-
- // USB Phy Calibration Adjustment
- ddVar = (USB1_EHCI_BUS_DEV_FUN << 16);
- sbUsbPhySetting (ddVar);
- ddVar = (USB2_EHCI_BUS_DEV_FUN << 16);
- sbUsbPhySetting (ddVar);
- ddVar = (USB3_EHCI_BUS_DEV_FUN << 16);
- sbUsbPhySetting (ddVar);
-
- c3PopupSetting (pConfig);
- FusionRelatedSetting (pConfig);
-}
-
-/**
- * sbUsbPhySetting - USB Phy Calibration Adjustment
- *
- *
- * @param[in] Value Controller PCI config address (bus# + device# + function#)
- *
- */
-VOID
-sbUsbPhySetting (
- IN UINT32 Value
- )
-{
- UINT32 ddBarAddress;
- UINT32 ddPhyStatus03;
- UINT32 ddPhyStatus4;
- UINT8 dbRevId;
- //Get BAR address
- ReadPCI ((UINT32) Value + SB_EHCI_REG10, AccWidthUint32, &ddBarAddress);
- if ( (ddBarAddress != - 1) && (ddBarAddress != 0) ) {
- ReadMEM ( ddBarAddress + SB_EHCI_BAR_REGA8, AccWidthUint32, &ddPhyStatus03);
- ReadMEM ( ddBarAddress + SB_EHCI_BAR_REGAC, AccWidthUint32, &ddPhyStatus4);
- ddPhyStatus03 &= 0x07070707;
- ddPhyStatus4 &= 0x00000007;
- if ( (ddPhyStatus03 != 0x00) | (ddPhyStatus4 != 0x00) ) {
- // RPR 7.7 USB 2.0 Ports Driving Strength step 1
- //Make BAR registers of smbus visible.
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC8 + 1, AccWidthUint8, ~BIT6, 0);
- ReadPCI ((SMBUS_BUS_DEV_FUN << 16) + SB_CFG_REG08, AccWidthUint8, &dbRevId);
- //Make BAR registers of smbus invisible.
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC8 + 1, AccWidthUint8, ~BIT6, BIT6);
- if (dbRevId == 0x41) { // A12
- RWMEM (ddBarAddress + SB_EHCI_BAR_REGC0, AccWidthUint32, 0xFFFF00FF, 0x1500);
- RWMEM (ddBarAddress + SB_EHCI_BAR_REGC4, AccWidthUint32, 0xFFFFF0FF, 0);
- } else if (dbRevId == 0x42) { // A13
- RWMEM (ddBarAddress + SB_EHCI_BAR_REGC0, AccWidthUint32, 0xFFFF00FF, 0x0F00);
- RWMEM (ddBarAddress + SB_EHCI_BAR_REGC4, AccWidthUint32, 0xFFFFF0FF, 0x0100);
- }
- }
- }
-}
-
-/**
- * hpetInit - Program Southbridge HPET function
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- * @param[in] pStaticOptions Platform build configuration table.
- *
- */
-VOID
-hpetInit (
- IN AMDSBCFG* pConfig,
- IN BUILDPARAM *pStaticOptions
- )
-{
- DESCRIPTION_HEADER* pHpetTable;
- UINT8 cimHpetTimer;
- UINT8 cimHpetMsiDis;
-
- cimHpetTimer = (UINT8) pConfig->HpetTimer;
- cimHpetMsiDis = (UINT8) pConfig->HpetMsiDis;
-#if SB_CIMx_PARAMETER == 0
- cimHpetTimer = cimHpetTimerDefault;
- cimHpetMsiDis = cimHpetMsiDisDefault;
-#endif
- pHpetTable = NULL;
- if ( cimHpetTimer == TRUE ) {
- //Program the HPET BAR address
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG50, AccWidthUint32 | S3_SAVE, 0xFFFFF800, pStaticOptions->HpetBase);
- //Enabling decoding of HPET MMIO
- //Enable HPET MSI support
- //Enable High Precision Event Timer (also called Multimedia Timer) interrupt
- if ( cimHpetMsiDis == FALSE ) {
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG50, AccWidthUint32 | S3_SAVE, 0xFFFFF800, BIT0 + BIT1 + BIT2 + BIT3 + BIT4);
- } else {
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG50, AccWidthUint32 | S3_SAVE, 0xFFFFF800, BIT0 + BIT1);
- }
-
- } else {
- if ( ! (pConfig->S3Resume) ) {
- pHpetTable = (DESCRIPTION_HEADER*) ACPI_LocateTable (Int32FromChar('H', 'P', 'E', 'T'));
- }
- if ( pHpetTable != NULL ) {
- pHpetTable->Signature = Int32FromChar('T', 'E', 'P', 'H');
- }
- }
-}
-
-/**
- * c3PopupSetting - Program Southbridge C state function
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-c3PopupSetting (
- IN AMDSBCFG* pConfig
- )
-{
- AMDSBCFG* Temp;
- UINT8 dbValue;
- Temp = pConfig;
- //RPR C-State and VID/FID Change
- dbValue = getNumberOfCpuCores ();
- if (dbValue > 1) {
- //PM 0x80[2]=1, For system with dual core CPU, set this bit to 1 to automatically clear BM_STS when the C3 state is being initiated.
- //PM 0x80[1]=1, For system with dual core CPU, set this bit to 1 and BM_STS will cause C3 to wakeup regardless of BM_RLD
- //PM 0x7E[6]=1, Enable pop-up for C3. For internal bus mastering or BmReq# from the NB, the SB will de-assert
- //LDTSTP# (pop-up) to allow DMA traffic, then assert LDTSTP# again after some idle time.
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG80, AccWidthUint8 | S3_SAVE, ~(BIT1 + BIT2), (BIT1 + BIT2));
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG7E, AccWidthUint8 | S3_SAVE, ~BIT6, BIT6);
- }
- //SB800 needs to changed for RD790 support
- //PM 0x80 [8] = 0 for system with RS780
- //Note: RS690 north bridge has AllowLdtStop built for both display and PCIE traffic to wake up the HT link.
- //BmReq# needs to be ignored otherwise may cause LDTSTP# not to toggle.
- //PM_IO 0x80[3]=1, Ignore BM_STS_SET message from NB
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG80, AccWidthUint16 | S3_SAVE, ~(BIT9 + BIT8 + BIT7 + BIT4 + BIT3 + BIT2 + BIT1 + BIT0), 0x21F);
- //LdtStartTime = 10h for minimum LDTSTP# de-assertion duration of 16us in StutterMode. This is to guarantee that
- //the HT link has been safely reconnected before it can be disconnected again. If C3 pop-up is enabled, the 16us also
- //serves as the minimum idle time before LDTSTP# can be asserted again. This allows DMA to finish before the HT
- //link is disconnected.
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG94 + 2, AccWidthUint8, 0, 0x10);
-
- //This setting provides 16us delay before the assertion of LDTSTOP# when C3 is entered. The
- //delay will allow USB DMA to go on in a continuous manner
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG98 + 1, AccWidthUint8, 0, 0x10);
- // Not in the RPR so far, it's hand writing from ASIC
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG7C, AccWidthUint8 | S3_SAVE, 0, 0x85);
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG7C + 1, AccWidthUint8 | S3_SAVE, 0, 0x01);
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG7E + 1, AccWidthUint8 | S3_SAVE, ~(BIT7 + BIT5), BIT7 + BIT5);
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG88 + 1, AccWidthUint8 | S3_SAVE, ~BIT4, BIT4);
- // RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG94, AccWidthUint8, 0, 0x10);
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG98 + 3, AccWidthUint8, 0, 0x10);
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGB4 + 1, AccWidthUint8, 0, 0x0B);
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG88, AccWidthUint8 | S3_SAVE, 0xFF, BIT4);
- if (pConfig->LdtStpDisable) {
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG88, AccWidthUint8 | S3_SAVE, ~BIT5, 0);
- }
-}
-
-/**
- * FusionRelatedSetting - Program Fusion C related function
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-FusionRelatedSetting (
- IN AMDSBCFG* pConfig
- )
-{
- UINT8 cimAcDcMsg;
- UINT8 cimTimerTickTrack;
- UINT8 cimClockInterruptTag;
- UINT8 cimOhciTrafficHanding;
- UINT8 cimEhciTrafficHanding;
- UINT8 cimFusionMsgCMultiCore;
- UINT8 cimFusionMsgCStage;
- UINT32 ddValue;
-
- cimAcDcMsg = (UINT8) pConfig->AcDcMsg;
- cimTimerTickTrack = (UINT8) pConfig->TimerTickTrack;
- cimClockInterruptTag = (UINT8) pConfig->ClockInterruptTag;
- cimOhciTrafficHanding = (UINT8) pConfig->OhciTrafficHanding;
- cimEhciTrafficHanding = (UINT8) pConfig->EhciTrafficHanding;
- cimFusionMsgCMultiCore = (UINT8) pConfig->FusionMsgCMultiCore;
- cimFusionMsgCStage = (UINT8) pConfig->FusionMsgCStage;
-#if SB_CIMx_PARAMETER == 0
- cimAcDcMsg = cimAcDcMsgDefault;
- cimTimerTickTrack = cimTimerTickTrackDefault;
- cimClockInterruptTag = cimClockInterruptTagDefault;
- cimOhciTrafficHanding = cimOhciTrafficHandingDefault;
- cimEhciTrafficHanding = cimEhciTrafficHandingDefault;
- cimFusionMsgCMultiCore = cimFusionMsgCMultiCoreDefault;
- cimFusionMsgCStage = cimFusionMsgCStageDefault;
-#endif
- ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGA0, AccWidthUint32 | S3_SAVE, &ddValue);
- ddValue = ddValue & 0xC07F00A0;
- if ( cimAcDcMsg ) {
- ddValue = ddValue | BIT0;
- }
- if ( cimTimerTickTrack ) {
- ddValue = ddValue | BIT1;
- }
- if ( cimClockInterruptTag ) {
- ddValue = ddValue | BIT10;
- }
- if ( cimOhciTrafficHanding ) {
- ddValue = ddValue | BIT13;
- }
- if ( cimEhciTrafficHanding ) {
- ddValue = ddValue | BIT15;
- }
- if ( cimFusionMsgCMultiCore ) {
- ddValue = ddValue | BIT23;
- }
- if ( cimFusionMsgCStage ) {
- ddValue = (ddValue | (BIT6 + BIT4 + BIT3 + BIT2));
- }
- WriteMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGA0, AccWidthUint32 | S3_SAVE, &ddValue);
-}
-#ifndef NO_EC_SUPPORT
-/**
- * validateImcFirmware - Validate IMC Firmware.
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- * @retval TRUE Pass
- * @retval FALSE Failed
- */
-BOOLEAN
-validateImcFirmware (
- IN AMDSBCFG* pConfig
- )
-{
- UINT32 ImcSig;
- UINT32 ImcSigAddr;
- UINT32 ImcAddr;
- UINT32 CurAddr;
- UINT32 ImcBinSig0;
- UINT32 ImcBinSig1;
- UINT16 ImcBinSig2;
- UINT8 dbIMCChecksume;
- UINT8 dbIMC;
- ImcAddr = 0;
-
- // Software IMC enable
- ImcSigAddr = 0x80000; // start from 512k to 64M
- ImcSig = 0x0; //
- while ( ( ImcSig != 0x55aa55aa ) && ( ImcSigAddr <= 0x4000000 ) ) {
- CurAddr = 0xffffffff - ImcSigAddr + 0x20001;
- ReadMEM (CurAddr, AccWidthUint32, &ImcSig);
- ReadMEM ((CurAddr + 4), AccWidthUint32, &ImcAddr);
- ImcSigAddr <<= 1;
- }
-
- dbIMCChecksume = 0xff;
- if ( ImcSig == 0x55aa55aa ) {
- // "_AMD_IMC_C" at offset 0x2000 of the binary
- ReadMEM ((ImcAddr + 0x2000), AccWidthUint32, &ImcBinSig0);
- ReadMEM ((ImcAddr + 0x2004), AccWidthUint32, &ImcBinSig1);
- ReadMEM ((ImcAddr + 0x2008), AccWidthUint16, &ImcBinSig2);
- if ((ImcBinSig0 == 0x444D415F) && (ImcBinSig1 == 0x434D495F) && (ImcBinSig2 == 0x435F) ) {
- dbIMCChecksume = 0;
- for ( CurAddr = ImcAddr; CurAddr < ImcAddr + 0x10000; CurAddr++ ) {
- ReadMEM (CurAddr, AccWidthUint8, &dbIMC);
- dbIMCChecksume = dbIMCChecksume + dbIMC;
- }
- }
- }
- if ( dbIMCChecksume ) {
- return FALSE;
- } else {
- return TRUE;
- }
-}
-
-/**
- * softwareToggleImcStrapping - Software Toggle IMC Firmware Strapping.
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-softwareToggleImcStrapping (
- IN AMDSBCFG* pConfig
- )
-{
- UINT8 dbValue;
- UINT8 dbPortStatus;
- UINT32 abValue;
- UINT32 abValue1;
-
- getChipSysMode (&dbPortStatus);
-
- ReadPMIO (SB_PMIOA_REGBF, AccWidthUint8, &dbValue);
- //if ( (dbValue & (BIT6 + BIT7)) != 0xC0 ) { // PwrGoodOut =1, PwrGoodEnB=1
- //The strapStatus register is not mapped into StrapOveride not in the same bit position. The following is difference.
-
- //StrapStatus StrapOverride
- // bit4 bit17
- // bit6 bit12
- // bit12 bit15
- // bit15 bit16
- // bit16 bit18
- ReadMEM ((ACPI_MMIO_BASE + MISC_BASE + SB_MISC_REG80), AccWidthUint32, &abValue);
- abValue1 = abValue;
- if (abValue & BIT4) {
- abValue1 = (abValue1 & ~BIT4) | BIT17;
- }
- if (abValue & BIT6) {
- abValue1 = (abValue1 & ~BIT6) | BIT12;
- }
- if (abValue & BIT12) {
- abValue1 = (abValue1 & ~BIT12) | BIT15;
- }
- if (abValue & BIT15) {
- abValue1 = (abValue1 & ~BIT15) | BIT16;
- }
- if (abValue & BIT16) {
- abValue1 = (abValue1 & ~BIT16) | BIT18;
- }
- abValue1 |= BIT31; // Overwrite enable
- if ((dbPortStatus & ChipSysEcEnable) == 0) {
- abValue1 |= BIT2; // bit2- EcEnableStrap
- } else {
- abValue1 &= ~BIT2; // bit2=0 EcEnableStrap
- }
- WriteMEM ((ACPI_MMIO_BASE + MISC_BASE + SB_MISC_REG84), AccWidthUint32, &abValue1);
- dbValue |= BIT6; // PwrGoodOut =1
- dbValue &= ~BIT7; // PwrGoodEnB =0
- WritePMIO (SB_PMIOA_REGBF, AccWidthUint8, &dbValue);
-
- dbValue = 06;
- WriteIO (0xcf9, AccWidthUint8, &dbValue);
- SbStall (0xffffffff);
-}
-#endif
-
-#ifndef NO_HWM_SUPPORT
-/**
- * validateImcFirmware - Validate IMC Firmware.
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-hwmInit (
- IN AMDSBCFG* pConfig
- )
-{
- RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0xB2, AccWidthUint8 | S3_SAVE, 0, 0x55);
- RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0xB3, AccWidthUint8 | S3_SAVE, 0, 0x55);
- RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x91, AccWidthUint8 | S3_SAVE, 0, 0x55);
- RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x92, AccWidthUint8 | S3_SAVE, 0, 0x55);
-
- RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x00, AccWidthUint8 | S3_SAVE, 0, 0x06);
- RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x10, AccWidthUint8 | S3_SAVE, 0, 0x06);
- RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x20, AccWidthUint8 | S3_SAVE, 0, 0x06);
- RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x30, AccWidthUint8 | S3_SAVE, 0, 0x06);
- RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x40, AccWidthUint8 | S3_SAVE, 0, 0x06);
-
- RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x66, AccWidthUint8 | S3_SAVE, 0, 0x01);
- RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x6B, AccWidthUint8 | S3_SAVE, 0, 0x01);
- RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x70, AccWidthUint8 | S3_SAVE, 0, 0x01);
- RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x75, AccWidthUint8 | S3_SAVE, 0, 0x01);
- RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0x7A, AccWidthUint8 | S3_SAVE, 0, 0x01);
-
- RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0xF8, AccWidthUint8 | S3_SAVE, 0, 0x05);
- RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0xF9, AccWidthUint8 | S3_SAVE, 0, 0x06);
- RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0xFF, AccWidthUint8 | S3_SAVE, 0, 0x42);
- RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0xE9, AccWidthUint8 | S3_SAVE, 0, 0xFF);
- RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0xEB, AccWidthUint8 | S3_SAVE, 0, 0x1F);
- RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0xEF, AccWidthUint8 | S3_SAVE, 0, 0x04);
- RWMEM (ACPI_MMIO_BASE + PMIO2_BASE + 0xFB, AccWidthUint8 | S3_SAVE, 0, 0x00);
-}
-#endif
diff --git a/src/vendorcode/amd/cimx/sb800/SBDEF.h b/src/vendorcode/amd/cimx/sb800/SBDEF.h deleted file mode 100644 index bedb61e5dd..0000000000 --- a/src/vendorcode/amd/cimx/sb800/SBDEF.h +++ /dev/null @@ -1,252 +0,0 @@ -/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-
-//AMD Library Routines (AMDLIB.C)
-UINT8 getNumberOfCpuCores (OUT VOID);
-UINT32 readAlink (IN UINT32 Index);
-VOID writeAlink (IN UINT32 Index, IN UINT32 Data);
-VOID rwAlink (IN UINT32 Index, IN UINT32 AndMask, IN UINT32 OrMask);
-
-//AMD Library Routines (LEGACY.C)
-UINT32 GetFixUp (OUT VOID);
-
-//AMD Library Routines (IOLIB.C)
-VOID ReadIO (IN UINT16 Address, IN UINT8 OpFlag, IN VOID *Value);
-VOID WriteIO (IN UINT16 Address, IN UINT8 OpFlag, IN VOID *Value);
-VOID RWIO (IN UINT16 Address, IN UINT8 OpFlag, IN UINT32 Mask, IN UINT32 Data);
-
-
-
-//AMD Library Routines (MEMLIB.C)
-VOID ReadMEM (IN UINT32 Address, IN UINT8 OpFlag, IN VOID* Value);
-VOID WriteMEM (IN UINT32 Address, IN UINT8 OpFlag, IN VOID* Value);
-VOID RWMEM (IN UINT32 Address, IN UINT8 OpFlag, IN UINT32 Mask, IN UINT32 Data);
-
-//AMD Library Routines (PCILIB.C)
-VOID ReadPCI (IN UINT32 Address, IN UINT8 OpFlag, IN VOID *Value);
-VOID WritePCI (IN UINT32 Address, IN UINT8 OpFlag, IN VOID *Value);
-VOID RWPCI (IN UINT32 Address, IN UINT8 OpFlag, IN UINT32 Mask, IN UINT32 Data);
-
-//AMD Library Routines (SBPELIB.C)
-/**
- * Read Southbridge Revision ID cie Base
- *
- *
- * @retval 0xXXXXXXXX Revision ID
- *
- */
-UINT8 getRevisionID (OUT VOID);
-
-/**
- * programPciByteTable - Program PCI register by table (8 bits data)
- *
- *
- *
- * @param[in] pPciByteTable - Table data pointer
- * @param[in] dwTableSize - Table length
- *
- */
-VOID programPciByteTable (IN REG8MASK* pPciByteTable, IN UINT16 dwTableSize);
-
-/**
- * programSbAcpiMmioTbl - Program SB ACPI MMIO register by table (8 bits data)
- *
- *
- *
- * @param[in] pAcpiTbl - Table data pointer
- *
- */
-VOID programSbAcpiMmioTbl (IN AcpiRegWrite *pAcpiTbl);
-
-/**
- * getChipSysMode - Get Chip status
- *
- *
- * @param[in] Value - Return Chip strap status
- * StrapStatus [15.0] - SB800 chip Strap Status
- * @li <b>0001</b> - Not USED FWH
- * @li <b>0002</b> - Not USED LPC ROM
- * @li <b>0004</b> - EC enabled
- * @li <b>0008</b> - Reserved
- * @li <b>0010</b> - Internal Clock mode
- *
- */
-VOID getChipSysMode (IN VOID* Value);
-
-/**
- * Read Southbridge CIMx configuration structure pointer
- *
- *
- *
- * @retval 0xXXXXXXXX CIMx configuration structure pointer.
- *
- */
-AMDSBCFG* getConfigPointer (OUT VOID);
-
-//AMD Library Routines (PMIOLIB.C)
-/**
- * Read PMIO
- *
- *
- *
- * @param[in] Address - PMIO Offset value
- * @param[in] OpFlag - Access sizes
- * @param[in] Value - Read Data Buffer
- *
- */
-VOID ReadPMIO (IN UINT8 Address, IN UINT8 OpFlag, IN VOID* Value);
-
-/**
- * Write PMIO
- *
- *
- *
- * @param[in] Address - PMIO Offset value
- * @param[in] OpFlag - Access sizes
- * @param[in] Value - Write Data Buffer
- *
- */
-VOID WritePMIO (IN UINT8 Address, IN UINT8 OpFlag, IN VOID* Value);
-
-/**
- * RWPMIO - Read/Write PMIO
- *
- *
- *
- * @param[in] Address - PMIO Offset value
- * @param[in] OpFlag - Access sizes
- * @param[in] AndMask - Data And Mask 32 bits
- * @param[in] OrMask - Data OR Mask 32 bits
- *
- */
-VOID RWPMIO (IN UINT8 Address, IN UINT8 OpFlag, IN UINT32 AndMask, IN UINT32 OrMask);
-
-//AMD Library Routines (PMIO2LIB.C)
-
-/**
- * Read PMIO2
- *
- *
- *
- * @param[in] Address - PMIO2 Offset value
- * @param[in] OpFlag - Access sizes
- * @param[in] Value - Read Data Buffer
- *
- */
-VOID ReadPMIO2 (IN UINT8 Address, IN UINT8 OpFlag, IN VOID* Value);
-
-/**
- * Write PMIO 2
- *
- *
- *
- * @param[in] Address - PMIO2 Offset value
- * @param[in] OpFlag - Access sizes
- * @param[in] Value - Write Data Buffer
- *
- */
-VOID WritePMIO2 (IN UINT8 Address, IN UINT8 OpFlag, IN VOID* Value);
-
-/**
- * RWPMIO2 - Read/Write PMIO2
- *
- *
- *
- * @param[in] Address - PMIO2 Offset value
- * @param[in] OpFlag - Access sizes
- * @param[in] AndMask - Data And Mask 32 bits
- * @param[in] OrMask - Data OR Mask 32 bits
- *
- */
-VOID RWPMIO2 (IN UINT8 Address, IN UINT8 OpFlag, IN UINT32 AndMask, IN UINT32 OrMask);
-//AMD Library Routines (ECLIB.C)
-// ECLIB Routines
-
-// #ifndef NO_EC_SUPPORT
-
-/**
- * EnterEcConfig - Force EC into Config mode
- *
- *
- *
- *
- */
-VOID EnterEcConfig (VOID);
-
-/**
- * ExitEcConfig - Force EC exit Config mode
- *
- *
- *
- *
- */
-VOID ExitEcConfig (VOID);
-
-/**
- * ReadEC8 - Read EC register data
- *
- *
- *
- * @param[in] Address - EC Register Offset Value
- * @param[in] Value - Read Data Buffer
- *
- */
-VOID ReadEC8 (IN UINT8 Address, IN UINT8* Value);
-
-/**
- * WriteEC8 - Write date into EC register
- *
- *
- *
- * @param[in] Address - EC Register Offset Value
- * @param[in] Value - Write Data Buffer
- *
- */
-VOID WriteEC8 (IN UINT8 Address, IN UINT8* Value);
-
-/**
- * RWEC8 - Read/Write EC register
- *
- *
- *
- * @param[in] Address - EC Register Offset Value
- * @param[in] AndMask - Data And Mask 8 bits
- * @param[in] OrMask - Data OR Mask 8 bits
- *
- */
-VOID RWEC8 (IN UINT8 Address, IN UINT8 AndMask, IN UINT8 OrMask);
-
-/**
- * IsZoneFuncEnable - check every zone support function with BitMap from user define
- *
- */
-BOOLEAN IsZoneFuncEnable ( UINT16 Flag, UINT8 func, UINT8 Zone);
-
-VOID sbECfancontrolservice (IN AMDSBCFG* pConfig);
-VOID SBIMCFanInitializeS3 (VOID);
-VOID GetSbAcpiMmioBase (OUT UINT32* AcpiMmioBase);
-VOID GetSbAcpiPmBase (OUT UINT16* AcpiPmBase);
-
-// #endif
-
diff --git a/src/vendorcode/amd/cimx/sb800/SBMAIN.c b/src/vendorcode/amd/cimx/sb800/SBMAIN.c deleted file mode 100644 index c6a205ea36..0000000000 --- a/src/vendorcode/amd/cimx/sb800/SBMAIN.c +++ /dev/null @@ -1,248 +0,0 @@ -/**
- * @file
- *
- * SB Initialization.
- *
- * Init IOAPIC/IOMMU/Misc NB features.
- *
- * @xrefitem bom "File Content Label" "Release Content"
- * @e project: CIMx-SB
- * @e sub-project:
- * @e \$Revision:$ @e \$Date:$
- *
- */
-/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-#include "SBPLATFORM.h"
-
-#ifndef B1_IMAGE
-
-/*----------------------------------------------------------------------------------------*/
-/**
- * sbBeforePciInit - Config Southbridge before PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-
-VOID
-sbBeforePciInit (
- IN AMDSBCFG* pConfig
- )
-{
- commonInitEarlyBoot (pConfig);
- commonInitEarlyPost (pConfig);
-#ifndef NO_EC_SUPPORT
- ecInitBeforePciEnum (pConfig);
-#endif
- usbInitBeforePciEnum (pConfig); // USB POST TIME Only
- sataInitBeforePciEnum (pConfig); // Init SATA class code and PHY
- gecInitBeforePciEnum (pConfig); // Init GEC
- azaliaInitBeforePciEnum (pConfig); // Detect and configure High Definition Audio
- sbPcieGppEarlyInit (pConfig); // Gpp port init
- abSpecialSetBeforePciEnum (pConfig);
- usbDesertPll (pConfig);
-}
-
-/**
- * sbAfterPciInit - Config Southbridge after PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-sbAfterPciInit (
- IN AMDSBCFG* pConfig
- )
-{
- usbInitAfterPciInit (pConfig); // Init USB MMIO
- sataInitAfterPciEnum (pConfig); // SATA port enumeration
- gecInitAfterPciEnum (pConfig);
- azaliaInitAfterPciEnum (pConfig); // Detect and configure High Definition Audio
-
-#ifndef NO_HWM_SUPPORT
- hwmInit (pConfig);
-#endif
-}
-
-/**
- * sbMidPostInit - Config Southbridge during middle of POST
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-sbMidPostInit (
- IN AMDSBCFG* pConfig
- )
-{
- sataInitMidPost (pConfig);
-}
-
-/*----------------------------------------------------------------------------------------*/
-/**
- * sbLatePost - Prepare Southbridge to boot to OS.
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-sbLatePost (
- IN AMDSBCFG* pConfig
- )
-{
-// UINT16 dwVar;
- BUILDPARAM *pStaticOptions;
- pStaticOptions = &(pConfig->BuildParameters);
- commonInitLateBoot (pConfig);
- sataInitLatePost (pConfig);
- gecInitLatePost (pConfig);
- hpetInit (pConfig, pStaticOptions); // SB Configure HPET base and enable bit
-#ifndef NO_EC_SUPPORT
- ecInitLatePost (pConfig);
-#endif
- sbPcieGppLateInit (pConfig);
-
-}
-
-/*----------------------------------------------------------------------------------------*/
-/**
- * sbBeforePciRestoreInit - Config Southbridge before ACPI S3 resume PCI config device restore
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-
-VOID
-sbBeforePciRestoreInit (
- IN AMDSBCFG* pConfig
- )
-{
- pConfig->S3Resume = 1;
- commonInitEarlyBoot (pConfig); // set /SMBUS/ACPI/IDE/LPC/PCIB
- abLinkInitBeforePciEnum (pConfig); // Set ABCFG registers
- usbInitBeforePciEnum (pConfig); // USB POST TIME Only
- sataInitBeforePciEnum (pConfig);
- gecInitBeforePciEnum (pConfig); // Init GEC
- azaliaInitBeforePciEnum (pConfig); // Detect and configure High Definition Audio
- sbPcieGppEarlyInit (pConfig); // Gpp port init
- abSpecialSetBeforePciEnum (pConfig);
-}
-
-/*----------------------------------------------------------------------------------------*/
-/**
- * sbAfterPciRestoreInit - Config Southbridge after ACPI S3 resume PCI config device restore
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-
-VOID
-sbAfterPciRestoreInit (
- IN AMDSBCFG* pConfig
- )
-{
- BUILDPARAM *pStaticOptions;
-
- pConfig->S3Resume = 1;
-
- usbSetPllDuringS3 (pConfig);
- pStaticOptions = &(pConfig->BuildParameters);
- commonInitLateBoot (pConfig);
- sataInitAfterPciEnum (pConfig);
- gecInitAfterPciEnum (pConfig);
- azaliaInitAfterPciEnum (pConfig); // Detect and configure High Definition Audio
- hpetInit (pConfig, pStaticOptions); // SB Configure HPET base and enable bit
- sataInitLatePost (pConfig);
- c3PopupSetting (pConfig);
-
-#ifndef NO_HWM_SUPPORT
- SBIMCFanInitializeS3 ();
-#endif
-}
-
-/*----------------------------------------------------------------------------------------*/
-/**
- * sbSmmAcpiOn - Config Southbridge during ACPI_ON
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-sbSmmAcpiOn (
- IN AMDSBCFG* pConfig
- )
-{
- // Commented the following code since we need to leave the IRQ1/12 filtering enabled always as per latest
- // recommendation in RPR. This is required to fix the keyboard stuck issue when playing games under Windows
- AMDSBCFG* pTmp; //lx-dummy for /W4 build
- pTmp = pConfig;
-
- // Disable Power Button SMI
- RWMEM (ACPI_MMIO_BASE + SMI_BASE + SB_SMI_REGB2, AccWidthUint8, ~(BIT4 + BIT5), 0);
- RWMEM (ACPI_MMIO_BASE + SMI_BASE + SB_SMI_REGAC, AccWidthUint8, ~(BIT6 + BIT7), 0);
-}
-
-#endif
-
-/*----------------------------------------------------------------------------------------*/
-/**
- * Call Back routine.
- *
- *
- *
- * @param[in] Func Callback ID.
- * @param[in] Data Callback specific data.
- * @param[in] pConfig Southbridge configuration structure pointer.
- */
-UINTN
-CallBackToOEM (
- IN UINT32 Func,
- IN UINT32 Data,
- IN AMDSBCFG* pConfig
- )
-{
- UINT32 Result;
- Result = 0;
- if ( pConfig->StdHeader.CALLBACK.CalloutPtr == NULL ) return Result;
- Result = (pConfig->StdHeader.CALLBACK.CalloutPtr) ( Func, Data, pConfig);
-
- return Result;
-}
-
-
diff --git a/src/vendorcode/amd/cimx/sb800/SBPELIB.c b/src/vendorcode/amd/cimx/sb800/SBPELIB.c deleted file mode 100644 index db746ee9fc..0000000000 --- a/src/vendorcode/amd/cimx/sb800/SBPELIB.c +++ /dev/null @@ -1,188 +0,0 @@ -/**
- * @file
- *
- * Southbridge IO access common routine
- *
- *
- *
- * @xrefitem bom "File Content Label" "Release Content"
- * @e project: CIMx-SB
- * @e sub-project:
- * @e \$Revision:$ @e \$Date:$
- *
- */
-/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-#include "SBPLATFORM.h"
-
-/**
- * Read Southbridge Revision ID cie Base
- *
- *
- * @retval 0xXXXXXXXX Revision ID
- *
- */
-UINT8
-getRevisionID (
- OUT VOID
- )
-{
- UINT8 dbVar0;
- ReadPCI (((SMBUS_BUS_DEV_FUN << 16) + SB_CFG_REG08), AccWidthUint8, &dbVar0);
- return dbVar0;
-}
-
-/*----------------------------------------------------------------------------------------*/
-/**
- * programPciByteTable - Program PCI register by table (8 bits data)
- *
- *
- *
- * @param[in] pPciByteTable - Table data pointer
- * @param[in] dwTableSize - Table length
- *
- */
-VOID
-programPciByteTable (
- IN REG8MASK* pPciByteTable,
- IN UINT16 dwTableSize
- )
-{
- UINT8 i;
- UINT8 dbBusNo;
- UINT8 dbDevFnNo;
- UINT32 ddBDFR;
-
- dbBusNo = pPciByteTable->bRegIndex;
- dbDevFnNo = pPciByteTable->bANDMask;
- pPciByteTable++;
-
- for ( i = 1; i < dwTableSize; i++ ) {
- if ( (pPciByteTable->bRegIndex == 0xFF) && (pPciByteTable->bANDMask == 0xFF) && (pPciByteTable->bORMask == 0xFF) ) {
- pPciByteTable++;
- dbBusNo = pPciByteTable->bRegIndex;
- dbDevFnNo = pPciByteTable->bANDMask;
- pPciByteTable++;
- i++;
- } else {
- ddBDFR = (dbBusNo << 24) + (dbDevFnNo << 16) + (pPciByteTable->bRegIndex) ;
- RWPCI (ddBDFR, AccWidthUint8 | S3_SAVE, pPciByteTable->bANDMask, pPciByteTable->bORMask);
- pPciByteTable++;
- }
- }
-}
-
-/*----------------------------------------------------------------------------------------*/
-/**
- * programSbAcpiMmioTbl - Program SB ACPI MMIO register by table (8 bits data)
- *
- *
- *
- * @param[in] pAcpiTbl - Table data pointer
- *
- */
-VOID
-programSbAcpiMmioTbl (
- IN AcpiRegWrite *pAcpiTbl
- )
-{
- UINT8 i;
- UINT32 ddtempVar;
- if (pAcpiTbl != NULL) {
- for ( i = 1; pAcpiTbl->MmioBase < 0xf0; i++ ) {
- ddtempVar = 0xFED80000 | (pAcpiTbl->MmioBase) << 8 | pAcpiTbl->MmioReg;
- RWMEM (ddtempVar, AccWidthUint8, ((pAcpiTbl->DataANDMask) | 0xFFFFFF00), pAcpiTbl->DataOrMask);
- pAcpiTbl++;
- }
- }
-}
-
-/**
- * getChipSysMode - Get Chip status
- *
- *
- * @param[in] Value - Return Chip strap status
- * StrapStatus [15.0] - SB800 chip Strap Status
- * @li <b>0001</b> - Not USED FWH
- * @li <b>0002</b> - Not USED LPC ROM
- * @li <b>0004</b> - EC enabled
- * @li <b>0008</b> - Reserved
- * @li <b>0010</b> - Internal Clock mode
- *
- */
-VOID
-getChipSysMode (
- IN VOID* Value
- )
-{
- ReadMEM (ACPI_MMIO_BASE + MISC_BASE + SB_MISC_REG80, AccWidthUint8, Value);
-}
-
-/*----------------------------------------------------------------------------------------*/
-/**
- * Read Southbridge CIMx configuration structure pointer
- *
- *
- *
- * @retval 0xXXXXXXXX CIMx configuration structure pointer.
- *
- */
-AMDSBCFG*
-getConfigPointer (
- OUT VOID
- )
-{
- UINT8 dbReg;
- UINT8 dbValue;
- UINT8 i;
- UINT32 ddValue;
- ddValue = 0;
- dbReg = SB_ECMOS_REG08;
-
- for ( i = 0; i <= 3; i++ ) {
- WriteIO (SB_IOMAP_REG72, AccWidthUint8, &dbReg);
- ReadIO (SB_IOMAP_REG73, AccWidthUint8, &dbValue);
- ddValue |= (dbValue << (i * 8));
- dbReg++;
- }
- return ( (AMDSBCFG*) (UINTN)ddValue);
-}
-
-/**
- * getEfuseStatue - Get Efuse status
- *
- *
- * @param[in] Value - Return Chip strap status
- *
- */
-VOID
-getEfuseStatus (
- IN VOID* Value
- )
-{
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC8, AccWidthUint8, ~BIT5, BIT5);
- WriteMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGD8, AccWidthUint8, Value);
- ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGD8 + 1, AccWidthUint8, Value);
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC8, AccWidthUint8, ~BIT5, 0);
-}
diff --git a/src/vendorcode/amd/cimx/sb800/SBPOR.c b/src/vendorcode/amd/cimx/sb800/SBPOR.c deleted file mode 100644 index 2b126af165..0000000000 --- a/src/vendorcode/amd/cimx/sb800/SBPOR.c +++ /dev/null @@ -1,347 +0,0 @@ -
-/**
- * @file
- *
- * Southbridge Init during POWER-ON
- *
- * Prepare Southbridge environment during power on stage.
- *
- * @xrefitem bom "File Content Label" "Release Content"
- * @e project: CIMx-SB
- * @e sub-project:
- * @e \$Revision:$ @e \$Date:$
- *
- */
-/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-#include "SBPLATFORM.h"
-/**
- * sbPorInitPciTable - PCI device registers initial during the power on stage.
- */
-const static REG8MASK sbPorInitPciTable[] =
-{
- // SATA device
- {0x00, SATA_BUS_DEV_FUN, 0},
- {SB_SATA_REG84 + 3, ~BIT2, 0},
- {SB_SATA_REG84 + 1, ~(BIT4 + BIT5), BIT4 + BIT5},
- {SB_SATA_REGA0, ~(BIT2 + BIT3 + BIT4 + BIT5 + BIT6), BIT2 + BIT3 + BIT4 + BIT5},
- {0xFF, 0xFF, 0xFF},
- // LPC Device (Bus 0, Dev 20, Func 3)
- {0x00, LPC_BUS_DEV_FUN, 0},
- {SB_LPC_REG48, 0x00, BIT0 + BIT1 + BIT2},
- {SB_LPC_REG7C, 0x00, BIT0 + BIT2},
- {SB_LPC_REGBB, 0xFF, BIT3 + BIT4 + BIT5},
- // A12 set 0xBB [5:3] = 111 to improve SPI timing margin.
- // A12 Set 0xBA [6:5] = 11 improve SPI timing margin. (SPI Prefetch enhancement)
- {SB_LPC_REGBB, 0xBE, BIT0 + BIT3 + BIT4 + BIT5},
- {SB_LPC_REGBA, 0x9F, BIT5 + BIT6},
- {0xFF, 0xFF, 0xFF},
- // P2P Bridge (Bus 0, Dev 20, Func 4)
- {0x00, PCIB_BUS_DEV_FUN, 0},
- {SB_PCIB_REG4B, 0xFF, BIT6 + BIT7 + BIT4},
- // Enable IO but not allocate any IO range. This is for post code display on debug port behind P2P bridge.
- {SB_PCIB_REG1C, 0x00, 0xF0},
- {SB_PCIB_REG1D, 0x00, 0x00},
- {SB_PCIB_REG04, 0x00, 0x21},
- {SB_PCIB_REG40, 0xDF, 0x20},
- {SB_PCIB_REG50, 0x02, 0x01},
- {0xFF, 0xFF, 0xFF},
-};
-
-/**
- * sbPmioPorInitTable - Southbridge ACPI MMIO initial during the power on stage.
- */
-const static AcpiRegWrite sbPmioPorInitTable[] =
-{
- {PMIO_BASE >> 8, SB_PMIOA_REG5D, 0x00, BIT0},
- {PMIO_BASE >> 8, SB_PMIOA_REGD2, 0xCF, BIT4 + BIT5},
- {SMBUS_BASE >> 8, SB_SMBUS_REG12, 0x00, BIT0},
- {PMIO_BASE >> 8, SB_PMIOA_REG28, 0xFF, BIT0},
- {PMIO_BASE >> 8, SB_PMIOA_REG44 + 3, 0x7F, BIT7},
- {PMIO_BASE >> 8, SB_PMIOA_REG48, 0xFF, BIT0},
- {PMIO_BASE >> 8, SB_PMIOA_REG00, 0xFF, 0x0E},
- {PMIO_BASE >> 8, SB_PMIOA_REG00 + 2, 0xFF, 0x40},
- {PMIO_BASE >> 8, SB_PMIOA_REG00 + 3, 0xFF, 0x08},
- {PMIO_BASE >> 8, SB_PMIOA_REG34, 0xEF, BIT0 + BIT1},
- {PMIO_BASE >> 8, SB_PMIOA_REGEC, 0xFD, BIT1},
- {PMIO_BASE >> 8, SB_PMIOA_REG5B, 0xF9, BIT1 + BIT2},
- {PMIO_BASE >> 8, SB_PMIOA_REG08, 0xFE, BIT2 + BIT4},
- {PMIO_BASE >> 8, SB_PMIOA_REG08 + 1, 0xFF, BIT0},
- {PMIO_BASE >> 8, SB_PMIOA_REG54, 0x00, BIT4 + BIT7},
- {PMIO_BASE >> 8, SB_PMIOA_REG04 + 3, 0xFD, BIT1},
- {PMIO_BASE >> 8, SB_PMIOA_REG74, 0xF6, BIT0 + BIT3},
- {PMIO_BASE >> 8, SB_PMIOA_REGF0, ~BIT2, 0x00},
- // RPR GEC I/O Termination Setting
- // PM_Reg 0xF6 = Power-on default setting
- // PM_Reg 0xF7 = Power-on default setting
- // PM_Reg 0xF8 = 0x6C
- // PM_Reg 0xF9 = 0x21
- // PM_Reg 0xFA = 0x00 SB800 A12 GEC I/O Pad settings for 3.3V CMOS
- {PMIO_BASE >> 8, SB_PMIOA_REGF8, 0x00, 0x6C},
- {PMIO_BASE >> 8, SB_PMIOA_REGF8 + 1, 0x00, 0x27},
- {PMIO_BASE >> 8, SB_PMIOA_REGF8 + 2, 0x00, 0x00},
- {PMIO_BASE >> 8, SB_PMIOA_REGC4, 0xFE, 0x14},
- {PMIO_BASE >> 8, SB_PMIOA_REGC0 + 2, 0xBF, 0x40},
-
- {PMIO_BASE >> 8, SB_PMIOA_REGBE, 0xDF, BIT5},//ENH210907 SB800: request to no longer clear kb_pcirst_en (bit 1) of PM_Reg BEh per the RPR
-
- {0xFF, 0xFF, 0xFF, 0xFF},
-};
-
-/**
- * sbPowerOnInit - Config Southbridge during power on stage.
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-sbPowerOnInit (
- IN AMDSBCFG* pConfig
- )
-{
-
- UINT8 dbPortStatus;
- UINT8 dbSysConfig;
- UINT32 abValue;
- UINT8 dbValue;
- UINT8 dbEfuse;
- UINT8 dbCg2WR;
- UINT8 dbCg1Pll;
- UINT8 cimNbSbGen2;
- UINT8 cimSataMode;
- UINT8 cimSpiFastReadEnable;
- UINT8 cimSpiFastReadSpeed;
- UINT8 SataPortNum;
-
- cimNbSbGen2 = pConfig->NbSbGen2;
- cimSataMode = pConfig->SATAMODE.SataModeReg;
-// Adding Fast Read Function support
- if (pConfig->BuildParameters.SpiFastReadEnable != NULL ) {
- cimSpiFastReadEnable = (UINT8) pConfig->BuildParameters.SpiFastReadEnable;
- } else {
- cimSpiFastReadEnable = cimSpiFastReadEnableDefault;
- }
- cimSpiFastReadSpeed = (UINT8) pConfig->BuildParameters.SpiFastReadSpeed;
-#if SB_CIMx_PARAMETER == 0
- cimNbSbGen2 = cimNbSbGen2Default;
- cimSataMode = (UINT8) ((cimSataMode & 0xFB) | cimSataSetMaxGen2Default);
- cimSataMode = (UINT8) ((cimSataMode & 0x0F) | (cimSATARefClkSelDefault + cimSATARefDivSelDefault));
- cimSpiFastReadEnable = cimSpiFastReadEnableDefault;
- cimSpiFastReadSpeed = cimSpiFastReadSpeedDefault;
-#endif
-
-// SB800 Only Enabled (Mmio_mem_enablr) // Default value is correct
- RWPMIO (SB_PMIOA_REG24, AccWidthUint8, 0xFF, BIT0);
-
-// Set A-Link bridge access address. This address is set at device 14h, function 0,
-// register 0f0h. This is an I/O address. The I/O address must be on 16-byte boundary.
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGE0, AccWidthUint32, 00, ALINK_ACCESS_INDEX);
- writeAlink (0x80000004, 0x04); // RPR 4.2 Enable SB800 to issue memory read/write requests in the upstream direction
- abValue = readAlink (SB_ABCFG_REG9C | (UINT32) (ABCFG << 29)); // RPR 4.5 Disable the credit variable in the downstream arbitration equation
- abValue = abValue | BIT0;
- writeAlink (SB_ABCFG_REG9C | (UINT32) (ABCFG << 29), abValue);
- writeAlink (0x30, 0x10); // AXINDC 0x10[9]=1, Enabling Non-Posted memory write for K8 platform.
- writeAlink (0x34, readAlink (0x34) | BIT9);
-
- dbEfuse = FUSE_ID_EFUSE_LOC;
- getEfuseStatus (&dbEfuse);
- if ( dbEfuse == M1_D1_FUSE_ID ) {
- dbEfuse = MINOR_ID_EFUSE_LOC;
- getEfuseStatus (&dbEfuse);
- if ( dbEfuse == M1_MINOR_ID ) {
- // Limit ALink speed to 2.5G if Hudson-M1
- cimNbSbGen2 = 0;
- }
- }
-// Step 1:
-// AXINDP_Reg 0xA4[0] = 0x1
-// Step 2:
-// AXCFG_Reg 0x88[3:0] = 0x2
-// Step3:
-// AXINDP_Reg 0xA4[18] = 0x1
- if ( cimNbSbGen2 == TRUE ) {
- rwAlink (SB_AX_INDXP_REGA4, 0xFFFFFFFF, BIT0);
- rwAlink ((UINT32)SB_AX_CFG_REG88, 0xFFFFFFF0, 0x2);
- rwAlink (SB_AX_INDXP_REGA4, 0xFFFFFFFF, BIT18);
- }
-
-// Set Build option into SB
- WritePCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG64, AccWidthUint16 | S3_SAVE, &(pConfig->BuildParameters.SioPmeBaseAddress));
- RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA0, AccWidthUint32 | S3_SAVE, 0x001F, (pConfig->BuildParameters.SpiRomBaseAddress));
- RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG9C, AccWidthUint32 | S3_SAVE, 0, (pConfig->BuildParameters.GecShadowRomBase + 1));
-// Enabled SMBUS0/SMBUS1 (ASF) Base Address
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG2C, AccWidthUint16, 06, (pConfig->BuildParameters.Smbus0BaseAddress) + BIT0); //protect BIT[2:1]
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG28, AccWidthUint16, 00, (pConfig->BuildParameters.Smbus1BaseAddress));
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG60, AccWidthUint16, 00, (pConfig->BuildParameters.AcpiPm1EvtBlkAddr));
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG62, AccWidthUint16, 00, (pConfig->BuildParameters.AcpiPm1CntBlkAddr));
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG64, AccWidthUint16, 00, (pConfig->BuildParameters.AcpiPmTmrBlkAddr));
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG66, AccWidthUint16, 00, (pConfig->BuildParameters.CpuControlBlkAddr));
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG68, AccWidthUint16, 00, (pConfig->BuildParameters.AcpiGpe0BlkAddr));
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG6A, AccWidthUint16, 00, (pConfig->BuildParameters.SmiCmdPortAddr));
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG6C, AccWidthUint16, 00, (pConfig->BuildParameters.AcpiPmaCntBlkAddr));
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG6E, AccWidthUint16, 00, (pConfig->BuildParameters.SmiCmdPortAddr) + 8);
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG48, AccWidthUint32, 00, (pConfig->BuildParameters.WatchDogTimerBase));
-
- dbEfuse = SATA_FIS_BASE_EFUSE_LOC;
- getEfuseStatus (&dbEfuse);
-
- programSbAcpiMmioTbl ((AcpiRegWrite*) FIXUP_PTR (&sbPmioPorInitTable[0]));
-
-
- SataPortNum = 0;
- for ( SataPortNum = 0; SataPortNum < 0x06; SataPortNum++ ) {
- RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 2), AccWidthUint8, 0xFF, 1 << SataPortNum);
- SbStall (2);
- RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 2), AccWidthUint8, (0xFF ^ (1 << SataPortNum)) , 0x00);
- SbStall (2);
- }
-
-
- //The following bits must be set before enabling SPI prefetch.
- // Set SPI MMio bit offset 00h[19] to 1 and offset 00h[26:24] to 111, offset 0ch[21:16] to 1, Set LPC cfg BBh[6] to 0 ( by default it is 0).
- // if Ec is enable
- // Maximum spi speed that can be supported by SB is 22M (SPI Mmio offset 0ch[13:12] to 10) if the rom can run at the speed.
- // else
- // Maximum spi speed that can be supported by SB is 33M (SPI Mmio offset 0ch[13:12] to 01 in normal mode or offset 0ch[15:14] in fast mode) if the rom can run at
- // the speed.
- getChipSysMode (&dbSysConfig);
- if (pConfig->BuildParameters.SpiSpeed < 0x02) {
- pConfig->BuildParameters.SpiSpeed = 0x01;
- if (dbSysConfig & ChipSysEcEnable) pConfig->BuildParameters.SpiSpeed = 0x02;
- }
-
- if (pConfig->SbSpiSpeedSupport) {
- RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG00, AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, (BIT19 + BIT24 + BIT25 + BIT26));
- RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG0C, AccWidthUint32 | S3_SAVE, 0xFFC0FFFF, 1 << 16 );
- RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG0C, AccWidthUint16 | S3_SAVE, ~(BIT13 + BIT12), (pConfig->BuildParameters.SpiSpeed << 12));
- }
- // SPI Fast Read Function
- if ( cimSpiFastReadEnable ) {
- RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG00, AccWidthUint32 | S3_SAVE, 0xFFFBFFFF, BIT18);
- } else {
- RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG00, AccWidthUint32 | S3_SAVE, 0xFFFBFFFF, 0x00);
- }
-
- if ( cimSpiFastReadSpeed ) {
- RWMEM ((pConfig->BuildParameters.SpiRomBaseAddress) + SB_SPI_MMIO_REG0C, AccWidthUint16 | S3_SAVE, ~(BIT15 + BIT14), ( cimSpiFastReadSpeed << 14));
- }
- //Program power on pci init table
- programPciByteTable ( (REG8MASK*) FIXUP_PTR (&sbPorInitPciTable[0]), sizeof (sbPorInitPciTable) / sizeof (REG8MASK) );
-
- programSbAcpiMmioTbl ((AcpiRegWrite *) (pConfig->OEMPROGTBL.OemProgrammingTablePtr_Ptr));
-
- dbValue = 0x0A;
- WriteIO (SB_IOMAP_REG70, AccWidthUint8, &dbValue);
- ReadIO (SB_IOMAP_REG71, AccWidthUint8, &dbValue);
- dbValue &= 0xEF;
- WriteIO (SB_IOMAP_REG71, AccWidthUint8, &dbValue);
-
-// Change the CG PLL multiplier to x1.1
- if ( pConfig->UsbRxMode !=0 ) {
- dbCg2WR = 0x00;
- dbCg1Pll = 0x3A;
- ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC8, AccWidthUint8, &dbCg2WR);
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGD8, AccWidthUint8, 0, 0x3A);
- ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGD9, AccWidthUint8, &dbCg1Pll);
- dbCg2WR &= BIT4;
- if (( dbCg2WR == 0x00 ) && ( dbCg1Pll !=0x10 ))
- {
- RWMEM (ACPI_MMIO_BASE + MISC_BASE + 0x18, AccWidthUint8, 0xE1, 0x10);
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGD8, AccWidthUint8, 0, 0x3A);
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGD9, AccWidthUint8, 0, USB_PLL_Voltage);
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC8, AccWidthUint8, 0xEF, 0x10);
- dbValue = 0x06;
- WriteIO (0xCF9, AccWidthUint8, &dbValue);
- } else {
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC8, AccWidthUint8, 0xEF, 0x00);
- }
- }
-
- RWPCI ((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG6C, AccWidthUint32 | S3_SAVE, ~(pConfig->BuildParameters.BiosSize << 4), 0);
-
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGDA, AccWidthUint8, 0, (pConfig->SATAMODE.SataModeReg) & 0xFD );
-
- if (dbEfuse & BIT0) {
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGDA, AccWidthUint8, 0xFB, 0x04);
- }
-
- ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGDA, AccWidthUint8, &dbPortStatus);
- if ( ((dbPortStatus & 0xF0) == 0x10) ) {
- RWMEM (ACPI_MMIO_BASE + MISC_BASE + SB_PMIOA_REG08, AccWidthUint8, 0, BIT5);
- }
-
- if ( pConfig->BuildParameters.LegacyFree ) {
- RWPCI (((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG44), AccWidthUint32 | S3_SAVE, 00, 0x0003C000);
- } else {
- RWPCI (((LPC_BUS_DEV_FUN << 16) + SB_LPC_REG44), AccWidthUint32 | S3_SAVE, 00, 0xFF03FFD5);
- }
-
- dbValue = 0x09;
- WriteIO (SB_IOMAP_REGC00, AccWidthUint8, &dbValue);
- ReadIO (SB_IOMAP_REGC01, AccWidthUint8, &dbValue);
- if ( !pConfig->BuildParameters.EcKbd ) {
- // Route SIO IRQ1/IRQ12 to USB IRQ1/IRQ12 input
- dbValue = dbValue & 0xF9;
- }
- if ( pConfig->BuildParameters.LegacyFree ) {
- // Disable IRQ1/IRQ12 filter enable for Legacy free with USB KBC emulation.
- dbValue = dbValue & 0x9F;
- }
- // Enabled IRQ input
- dbValue = dbValue | BIT4;
- WriteIO (SB_IOMAP_REGC01, AccWidthUint8, &dbValue);
-
-#ifndef NO_EC_SUPPORT
- getChipSysMode (&dbPortStatus);
- if ( ((dbPortStatus & ChipSysEcEnable) == 0x00) ) {
- // EC is disabled by jumper setting or board config
- RWPCI (((LPC_BUS_DEV_FUN << 16) + SB_LPC_REGA4), AccWidthUint16 | S3_SAVE, 0xFFFE, BIT0);
- } else {
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC4, AccWidthUint8, 0xF7, 0x08);
- ecPowerOnInit ( pConfig);
- }
-#endif
-
- ReadMEM (ACPI_MMIO_BASE + MISC_BASE + SB_MISC_REG80, AccWidthUint8, &dbValue);
- if (dbValue & ChipSysIntClkGen) {
- ReadMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC4, AccWidthUint8, &dbValue);
- if (dbValue & BIT2) {
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC0 + 2, AccWidthUint8, 0xDF, 0x20);
- } else {
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC4, AccWidthUint8, 0xFB, 0x40);
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC0 + 2, AccWidthUint8, 0xDF, 0x20);
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGC4, AccWidthUint8, 0xFB, 0x00);
- }
- }
-
- // Restore GPP clock to on as it may be off during last POST when some device was disabled;
- // the device can't be detected if enabled again as the values retain on S5 and warm reset.
- RWMEM (ACPI_MMIO_BASE + MISC_BASE + SB_MISC_REG00, AccWidthUint32, 0xFFFFFFFF, 0xFFFFFFFF);
- RWMEM (ACPI_MMIO_BASE + MISC_BASE + SB_MISC_REG04, AccWidthUint8, 0xFF, 0xFF);
-
- // Set PMx88[5]to enable LdtStp# output to do the C3 or FidVid transation
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REG88, AccWidthUint8, 0xFF, BIT5);
-}
diff --git a/src/vendorcode/amd/cimx/sb800/SBSUBFUN.h b/src/vendorcode/amd/cimx/sb800/SBSUBFUN.h deleted file mode 100644 index eb5b37809d..0000000000 --- a/src/vendorcode/amd/cimx/sb800/SBSUBFUN.h +++ /dev/null @@ -1,514 +0,0 @@ -/**
- * @file
- *
- * Southbridge CIMx Function Support Define (All)
- *
- *
- *
- * @xrefitem bom "File Content Label" "Release Content"
- * @e project: CIMx-SB
- * @e sub-project:
- * @e \$Revision:$ @e \$Date:$
- *
- */
-/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-// Southbridge SBMAIN Routines
-
-/**
- * Southbridge Main Function Public Function
- *
- */
-
-/**
- * sbBeforePciInit - Config Southbridge before PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID sbBeforePciInit (IN AMDSBCFG* pConfig);
-
-
-/**
- * sbAfterPciInit - Config Southbridge after PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID sbAfterPciInit (IN AMDSBCFG* pConfig);
-
-/**
- * sbMidPostInit - Config Southbridge during middle of POST
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID sbMidPostInit (IN AMDSBCFG* pConfig);
-
-/**
- * sbLatePost - Prepare Southbridge to boot to OS.
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID sbLatePost (IN AMDSBCFG* pConfig);
-
-/**
- * sbBeforePciRestoreInit - Config Southbridge before ACPI S3 resume PCI config device restore
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID sbBeforePciRestoreInit (IN AMDSBCFG* pConfig);
-
-/**
- * sbAfterPciRestoreInit - Config Southbridge after ACPI S3 resume PCI config device restore
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID sbAfterPciRestoreInit (IN AMDSBCFG* pConfig);
-
-/**
- * sbSmmAcpiOn - Config Southbridge during ACPI_ON
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID sbSmmAcpiOn (IN AMDSBCFG* pConfig);
-
-/**
- * CallBackToOEM - Call Back routine.
- *
- *
- *
- * @param[in] Func Callback ID.
- * @param[in] Data Callback specific data.
- * @param[in] pConfig Southbridge configuration structure pointer.
- */
-UINTN CallBackToOEM (IN UINT32 Func, IN UINT32 Data, IN AMDSBCFG* pConfig);
-
-
-// Southbridge SBPOR Routines
-
-/**
- * Southbridge power-on initial Public Function
- *
- */
-
-/**
- * sbPowerOnInit - Config Southbridge during power on stage.
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID sbPowerOnInit (IN AMDSBCFG* pConfig);
-
-
-// Southbridge Common Routines
-
-/**
- * Southbridge Common Public Function
- *
- */
-
-/**
- * commonInitEarlyBoot - Config Southbridge SMBUS/ACPI/IDE/LPC/PCIB.
- *
- * This settings should be done during S3 resume also
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID commonInitEarlyBoot (IN AMDSBCFG* pConfig);
-
-/**
- * commonInitEarlyPost - Config Southbridge SMBUS/ACPI/IDE/LPC/PCIB.
- *
- * This settings might not program during S3 resume
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID commonInitEarlyPost (IN AMDSBCFG* pConfig);
-
-/**
- * commonInitLateBoot - Prepare Southbridge register setting to boot to OS.
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID commonInitLateBoot (IN AMDSBCFG* pConfig);
-
-/**
- * abSpecialSetBeforePciEnum - Special setting ABCFG registers before PCI emulation.
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID abSpecialSetBeforePciEnum (IN AMDSBCFG* pConfig);
-
-VOID usbSetPllDuringS3 (IN AMDSBCFG* pConfig);
-VOID usbDesertPll (IN AMDSBCFG* pConfig);
-
-/**
- * hpetInit - Program Southbridge HPET function
- *
- * ** Eric
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- * @param[in] pStaticOptions Platform build configuration table.
- *
- */
-VOID hpetInit (IN AMDSBCFG* pConfig, IN BUILDPARAM *pStaticOptions);
-
-/**
- * c3PopupSetting - Program Southbridge C state function
- *
- * ** Eric
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID c3PopupSetting (IN AMDSBCFG* pConfig);
-
-/**
- * FusionRelatedSetting - Program Fusion C related function
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID FusionRelatedSetting (IN AMDSBCFG* pConfig);
-
-/**
- * Southbridge Common Private Function
- *
- */
-
-/**
- * abLinkInitBeforePciEnum - Set ABCFG registers before PCI emulation.
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID abLinkInitBeforePciEnum (IN AMDSBCFG* pConfig);
-
-// Southbridge SATA Routines
-
-/**
- * Southbridge SATA Controller Public Function
- *
- */
-
-/**
- * sataInitMidPost - Config SATA controller in Middle POST.
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID sataInitMidPost (IN AMDSBCFG* pConfig);
-
-/**
- * sataInitAfterPciEnum - Config SATA controller after PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID sataInitAfterPciEnum (IN AMDSBCFG* pConfig);
-
-/**
- * sataInitBeforePciEnum - Config SATA controller before PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID sataInitBeforePciEnum (IN AMDSBCFG* pConfig);
-
-/**
- * sataInitLatePost - Prepare SATA controller to boot to OS.
- *
- * - Set class ID to AHCI (if set to AHCI * Mode)
- * - Enable AHCI interrupt
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID sataInitLatePost (IN AMDSBCFG* pConfig);
-
-// Southbridge GEC Routines
-
-/**
- * Southbridge GEC Controller Public Function
- *
- */
-
-/**
- * gecInitBeforePciEnum - Config GEC controller before PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID gecInitBeforePciEnum (IN AMDSBCFG* pConfig);
-
-/**
- * gecInitAfterPciEnum - Config GEC controller after PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID gecInitAfterPciEnum (IN AMDSBCFG* pConfig);
-
-/**
- * gecInitLatePost - Prepare GEC controller to boot to OS.
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID gecInitLatePost (IN AMDSBCFG* pConfig);
-
-// Southbridge USB Routines
-
-/**
- * Southbridge USB Controller Public Function
- *
- */
-
-/**
- * Config USB controller before PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID usbInitBeforePciEnum (IN AMDSBCFG* pConfig);
-
-/**
- * Config USB controller after PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID usbInitAfterPciInit (IN AMDSBCFG* pConfig);
-
-/**
- * Config USB1 EHCI controller after PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID usb1EhciInitAfterPciInit (IN AMDSBCFG* pConfig);
-VOID usb2EhciInitAfterPciInit (IN AMDSBCFG* pConfig);
-VOID usb3EhciInitAfterPciInit (IN AMDSBCFG* pConfig);
-VOID usb1OhciInitAfterPciInit (IN AMDSBCFG* pConfig);
-VOID usb2OhciInitAfterPciInit (IN AMDSBCFG* pConfig);
-VOID usb3OhciInitAfterPciInit (IN AMDSBCFG* pConfig);
-VOID usb4OhciInitAfterPciInit (IN AMDSBCFG* pConfig);
-
-// Southbridge SMI Service Routines (SMM.C)
-
-/**
- * Southbridge SMI Service Routines Public Function
- *
- */
-
-/**
- * Southbridge SMI service module
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID sbSmmService (IN AMDSBCFG* pConfig);
-
-/**
- * softwareSMIservice - Software SMI service
- *
- * ** Eric
- *
- * @param[in] VOID Southbridge software SMI service ID.
- *
- */
-VOID softwareSMIservice (IN VOID);
-
-// Southbridge GPP Controller Routines
-
-/**
- * Southbridge GPP Controller Routines Public Function
- *
- */
-
-/**
- * GPP early programming and link training. On exit all populated EPs should be fully operational.
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID sbPcieGppEarlyInit (IN AMDSBCFG* pConfig);
-
-/**
- * sbPcieGppLateInit - Late PCIE initialization for SB800 GPP component
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID sbPcieGppLateInit (IN AMDSBCFG* pConfig);
-
-// Southbridge HD Controller Routines (AZALIA.C)
-
-/**
- * Southbridge HD Controller Routines (AZALIA.C) Public Function
- *
- */
-
-/**
- * Config HD Audio Before PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID azaliaInitBeforePciEnum (IN AMDSBCFG* pConfig);
-
-/**
- * Config HD Audio after PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID azaliaInitAfterPciEnum (IN AMDSBCFG* pConfig);
-
-
-// Southbridge EC Routines
-
-#ifndef NO_EC_SUPPORT
-/**
- * Southbridge EC Controller Public Function
- *
- */
-
-/**
- * Config EC controller during power-on
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
- VOID ecPowerOnInit (IN AMDSBCFG* pConfig);
-
-/**
- * Config EC controller before PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
- VOID ecInitBeforePciEnum (IN AMDSBCFG* pConfig);
-
-/**
- * Prepare EC controller to boot to OS.
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
- VOID ecInitLatePost (IN AMDSBCFG* pConfig);
-
-/**
- * validateImcFirmware - Validate IMC Firmware.
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- * @retval TRUE Pass
- * @retval FALSE Failed
- */
- BOOLEAN validateImcFirmware (IN AMDSBCFG* pConfig);
-
-/**
- * validateImcFirmware - Validate IMC Firmware.
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
- VOID softwareToggleImcStrapping (IN AMDSBCFG* pConfig);
-#endif
-
-#ifndef NO_HWM_SUPPORT
-/**
- * validateImcFirmware - Validate IMC Firmware.
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
- VOID hwmInit (IN AMDSBCFG* pConfig);
-#endif
-
diff --git a/src/vendorcode/amd/cimx/sb800/SBTYPE.h b/src/vendorcode/amd/cimx/sb800/SBTYPE.h deleted file mode 100644 index ebd73fa44d..0000000000 --- a/src/vendorcode/amd/cimx/sb800/SBTYPE.h +++ /dev/null @@ -1,1111 +0,0 @@ -
-/**
- * @file
- *
- * Southbridge CIMx configuration structure define
- *
- *
- *
- * @xrefitem bom "File Content Label" "Release Content"
- * @e project: CIMx-SB
- * @e sub-project:
- * @e \$Revision:$ @e \$Date:$
- *
- */
-/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-#ifndef _AMD_SBTYPE_H_
-#define _AMD_SBTYPE_H_
-
-#pragma pack (push, 1)
-
-/**
- * Entry point of Southbridge CIMx
- *
- *
- * @param[in] Param1 Southbridge CIMx Function ID.
- * @param[in] Param2 Southbridge Input Data.
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-typedef UINT32 (*SBCIM_HOOK_ENTRY) (UINT32 Param1, UINT32 Param2, void* pConfig);
-/**
- * SMM_SERVICE_ROUTINE - Southbridge SMI service routine
- *
- */
-typedef void (*SMM_SERVICE_ROUTINE) (void);
-
-
-/**
- * The STATIC platform information for CIMx Module.
- *
- */
-typedef struct _BUILDPARAM {
- UINT32 BiosSize:3; /**< BiosSize
- * @par
- * BIOSSize [2.0] - BIOS Image Size
- * @li <b>0</b> - 1M
- * @li <b>1</b> - 2M
- * @li <b>3</b> - 4M
- * @li <b>7</b> - 8M
- * In SB800, default ROM size is 1M Bytes, if your platform ROM bigger then 1M
- * you have to set the ROM size outside CIMx module and before AGESA module get call
- *
- */
- UINT32 LegacyFree:1; /**< LegacyFree
- * @par
- * Config Southbridge CIMx module for Legacy Free Mode
- */
- UINT32 SpiSpeed:2; /**< SpiSpeed
- * @par
- * SPI Speed [1.0] - the clock speed for non-fast read command
- * @li <b>00</b> - 66Mhz
- * @li <b>01</b> - 33Mhz
- * @li <b>10</b> - 22Mhz
- * @li <b>11</b> - 16.5Mhz
- *
- */
- UINT32 ImcEnableOverWrite:2; /**< ImcEnableOverWrite
- * @par
- * Imc Enable OverWrite
- * @li <b>00</b> - by default strapping
- * @li <b>01</b> - On
- * @li <b>10</b> - Off
- *
- */
- UINT32 SpiFastReadEnable:1; /**< SpiFastReadEnable
- * @par
- * @li <b>00</b> - Disable SPI Fast Read Function
- * @li <b>01</b> - Enable SPI Fast Read Function
- */
- UINT32 SpiFastReadSpeed:2; /**< SpiFastReadSpeed
- * @par
- * @li <b>00</b> - 66Mhz
- * @li <b>01</b> - 33Mhz
- * @li <b>10</b> - 22Mhz
- * @li <b>11</b> - 16.5Mhz
- */
- UINT32 SpreadSpectrumType:1; /**< SpreadSpectrumType
- * @par
- * @li <b>0</b> - Spread Spectrum for normal platform
- * @li <b>1</b> - Spread Spectrum for Ontario platform
- */
-/** Dummy0 - Reserved */
- UINT32 Dummy0:4;
- UINT32 EcKbd:1; /**< EcKbd
- * @par
- * EcKbd [16] - Platform use EC (as SIO) or SIO chip for PS/2 Keyboard and Mouse
- * @li <b>0</b> - Use SIO PS/2 function.
- * @li <b>1</b> - Use EC PS/2 function instead of SIO PS/2 function. **
- * @li <b>**</b> When set 1, EC function have to enable, otherwise, CIMx treat as legacy-free system.
- */
-/** EcChannel0 - Reserved */
- UINT32 EcChannel0:1;
-/** UsbMsi - Reserved */
- UINT32 UsbMsi:1;
-/** HdAudioMsi - Reserved */
- UINT32 HdAudioMsi:1;
-/** LpcMsi - Reserved */
- UINT32 LpcMsi:1;
-/** PcibMsi - Reserved */
- UINT32 PcibMsi:1;
-/** AbMsi - Reserved */
- UINT32 AbMsi:1;
-/** Dummy1 - Reserved */
- UINT32 Dummy1:9;
-
- UINT32 Smbus0BaseAddress; /**< Smbus0BaseAddress
- * @par
- * Smbus BASE Address
- */
- UINT32 Smbus1BaseAddress; /**< Smbus1BaseAddress
- * @par
- * Smbus1 (ASF) BASE Address
- */
- UINT32 SioPmeBaseAddress; /**< SioPmeBaseAddress
- * @par
- * SIO PME BASE Address
- */
- UINT32 WatchDogTimerBase; /**< WatchDogTimerBase
- * @par
- * Watch Dog Timer Address
- */
- UINT32 GecShadowRomBase; /**< GecShadowRomBase
- * @par
- * GEC (NIC) SHADOWROM BASE Address
- */
- UINT32 SpiRomBaseAddress; /**< SpiRomBaseAddress
- * @par
- * SPI ROM BASE Address
- */
- UINT16 AcpiPm1EvtBlkAddr; /**< AcpiPm1EvtBlkAddr
- * @par
- * ACPI PM1 event block Address
- */
- UINT16 AcpiPm1CntBlkAddr; /**< AcpiPm1CntBlkAddr
- * @par
- * ACPI PM1 Control block Address
- */
- UINT16 AcpiPmTmrBlkAddr; /**< AcpiPmTmrBlkAddr
- * @par
- * ACPI PM timer block Address
- */
- UINT16 CpuControlBlkAddr; /**< CpuControlBlkAddr
- * @par
- * ACPI CPU control block Address
- */
- UINT16 AcpiGpe0BlkAddr; /**< AcpiGpe0BlkAddr
- * @par
- * ACPI GPE0 block Address
- */
- UINT16 SmiCmdPortAddr; /**< SmiCmdPortAddr
- * @par
- * SMI command port Address
- */
- UINT16 AcpiPmaCntBlkAddr; /**< AcpiPmaCntBlkAddr
- * @par
- * ACPI PMA Control block Address
- */
- UINT32 HpetBase; /**< HpetBase
- * @par
- * HPET Base address
- */
- UINT32 SataIDESsid; /**< SataIDESsid
- * @par
- * SATA IDE mode SSID
- */
- UINT32 SataRAIDSsid; /**< SataRAIDSsid
- * @par
- * SATA RAID mode SSID
- */
- UINT32 SataRAID5Ssid; /**< SataRAID5Ssid
- * @par
- * SATA RAID5 mode SSID
- */
- UINT32 SataAHCISsid; /**< SataAHCISsid
- * @par
- * SATA AHCI mode SSID
- */
- UINT32 OhciSsid; /**< OhciSsid
- * @par
- * OHCI Controller SSID
- */
- UINT32 EhciSsid; /**< EhciSsid
- * @par
- * EHCI Controller SSID
- */
- UINT32 Ohci4Ssid; /**< Ohci4Ssid
- * @par
- * OHCI4 Controller SSID (Force USB 1.1 mode)
- */
- UINT32 SmbusSsid; /**< SmbusSsid
- * @par
- * SMBUS controller SSID
- */
- UINT32 IdeSsid; /**< IdeSsid
- * @par
- * IDE (Sata) controller SSID
- */
- UINT32 AzaliaSsid; /**< AzaliaSsid
- * @par
- * HD Audio controller SSID
- */
- UINT32 LpcSsid; /**< LpcSsid
- * @par
- * LPC controller SSID
- */
- UINT32 PCIBSsid; /**< PCIBSsid
- * @par
- * PCIB controller SSID
- */
-} BUILDPARAM;
-
-/**
- * The EC fan MSGREG struct for CIMx Module. *
- */
-typedef struct _EC_struct {
- UINT8 MSGFun81zone0MSGREG0; ///<Thermal zone
- UINT8 MSGFun81zone0MSGREG1; ///<Thermal zone
- UINT8 MSGFun81zone0MSGREG2; ///<Thermal zone control byte 1
- UINT8 MSGFun81zone0MSGREG3; ///<Thermal zone control byte 2
- UINT8 MSGFun81zone0MSGREG4; ///<Bit[3:0] - Thermal diode offset adjustment in degrees Celsius.
- UINT8 MSGFun81zone0MSGREG5; ///<Hysteresis inforamtion
- UINT8 MSGFun81zone0MSGREG6; ///<SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032
- UINT8 MSGFun81zone0MSGREG7; ///<Bit[1:0]: 0 - 2, SMBUS bus number where the SMBUS based temperature sensor is located.
- UINT8 MSGFun81zone0MSGREG8; ///< @todo Style_Analyzer: Add Doxygen comments to struct entry
- UINT8 MSGFun81zone0MSGREG9; ///< @todo Style_Analyzer: Add Doxygen comments to struct entry
-
- //EC LDN9 funtion 81 zone 1
- UINT8 MSGFun81zone1MSGREG0; ///<Thermal zone
- UINT8 MSGFun81zone1MSGREG1; ///<Thermal zone
- UINT8 MSGFun81zone1MSGREG2; ///<Thermal zone control byte 1
- UINT8 MSGFun81zone1MSGREG3; ///<Thermal zone control byte 2
- UINT8 MSGFun81zone1MSGREG4; ///<Bit[3:0] - Thermal diode offset adjustment in degrees Celsius.
- UINT8 MSGFun81zone1MSGREG5; ///<Hysteresis inforamtion
- UINT8 MSGFun81zone1MSGREG6; ///<SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032
- UINT8 MSGFun81zone1MSGREG7; ///<Bit[1:0]: 0 - 2, SMBUS bus number where the SMBUS based temperature sensor is located.
- UINT8 MSGFun81zone1MSGREG8; ///< @todo Style_Analyzer: Add Doxygen comments to struct entry
- UINT8 MSGFun81zone1MSGREG9; ///< @todo Style_Analyzer: Add Doxygen comments to struct entry
-
- //EC LDN9 funtion 81 zone 2
- UINT8 MSGFun81zone2MSGREG0; ///<Thermal zone
- UINT8 MSGFun81zone2MSGREG1; ///<Thermal zone
- UINT8 MSGFun81zone2MSGREG2; ///<Thermal zone control byte 1
- UINT8 MSGFun81zone2MSGREG3; ///<Thermal zone control byte 2
- UINT8 MSGFun81zone2MSGREG4; ///<Bit[3:0] - Thermal diode offset adjustment in degrees Celsius.
- UINT8 MSGFun81zone2MSGREG5; ///<Hysteresis inforamtion
- UINT8 MSGFun81zone2MSGREG6; ///<SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032
- UINT8 MSGFun81zone2MSGREG7; ///<Bit[1:0]: 0 - 2, SMBUS bus number where the SMBUS based temperature sensor is located.
- UINT8 MSGFun81zone2MSGREG8; ///< @todo Style_Analyzer: Add Doxygen comments to struct entry
- UINT8 MSGFun81zone2MSGREG9; ///< @todo Style_Analyzer: Add Doxygen comments to struct entry
-
- //EC LDN9 funtion 81 zone 3
- UINT8 MSGFun81zone3MSGREG0; ///<Thermal zone
- UINT8 MSGFun81zone3MSGREG1; ///<Thermal zone
- UINT8 MSGFun81zone3MSGREG2; ///<Thermal zone control byte 1
- UINT8 MSGFun81zone3MSGREG3; ///<Thermal zone control byte 2
- UINT8 MSGFun81zone3MSGREG4; ///<Bit[3:0] - Thermal diode offset adjustment in degrees Celsius.
- UINT8 MSGFun81zone3MSGREG5; ///<Hysteresis inforamtion
- UINT8 MSGFun81zone3MSGREG6; ///<SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032
- UINT8 MSGFun81zone3MSGREG7; ///<Bit[1:0]: 0 - 2, SMBUS bus number where the SMBUS based temperature sensor is located.
- UINT8 MSGFun81zone3MSGREG8; ///< @todo Style_Analyzer: Add Doxygen comments to struct entry
- UINT8 MSGFun81zone3MSGREG9; ///< @todo Style_Analyzer: Add Doxygen comments to struct entry
-
- //EC LDN9 funtion 83 zone 0
- UINT8 MSGFun83zone0MSGREG0; ///<Thermal zone
- UINT8 MSGFun83zone0MSGREG1; ///<Thermal zone
- UINT8 MSGFun83zone0MSGREG2; ///<_AC0
- UINT8 MSGFun83zone0MSGREG3; ///<_AC1
- UINT8 MSGFun83zone0MSGREG4; ///<_AC2
- UINT8 MSGFun83zone0MSGREG5; ///<_AC3
- UINT8 MSGFun83zone0MSGREG6; ///<_AC4
- UINT8 MSGFun83zone0MSGREG7; ///<_AC5
- UINT8 MSGFun83zone0MSGREG8; ///<_AC6
- UINT8 MSGFun83zone0MSGREG9; ///<_AC7
- UINT8 MSGFun83zone0MSGREGA; ///<_CRT
- UINT8 MSGFun83zone0MSGREGB; ///<_PSV
-
- //EC LDN9 funtion 83 zone 1
- UINT8 MSGFun83zone1MSGREG0; ///<Thermal zone
- UINT8 MSGFun83zone1MSGREG1; ///<Thermal zone
- UINT8 MSGFun83zone1MSGREG2; ///<_AC0
- UINT8 MSGFun83zone1MSGREG3; ///<_AC1
- UINT8 MSGFun83zone1MSGREG4; ///<_AC2
- UINT8 MSGFun83zone1MSGREG5; ///<_AC3
- UINT8 MSGFun83zone1MSGREG6; ///<_AC4
- UINT8 MSGFun83zone1MSGREG7; ///<_AC5
- UINT8 MSGFun83zone1MSGREG8; ///<_AC6
- UINT8 MSGFun83zone1MSGREG9; ///<_AC7
- UINT8 MSGFun83zone1MSGREGA; ///<_CRT
- UINT8 MSGFun83zone1MSGREGB; ///<_PSV
-
- //EC LDN9 funtion 83 zone 2
- UINT8 MSGFun83zone2MSGREG0; ///<Thermal zone
- UINT8 MSGFun83zone2MSGREG1; ///<Thermal zone
- UINT8 MSGFun83zone2MSGREG2; ///<_AC0
- UINT8 MSGFun83zone2MSGREG3; ///<_AC1
- UINT8 MSGFun83zone2MSGREG4; ///<_AC2
- UINT8 MSGFun83zone2MSGREG5; ///<_AC3
- UINT8 MSGFun83zone2MSGREG6; ///<_AC4
- UINT8 MSGFun83zone2MSGREG7; ///<_AC5
- UINT8 MSGFun83zone2MSGREG8; ///<_AC6
- UINT8 MSGFun83zone2MSGREG9; ///<_AC7
- UINT8 MSGFun83zone2MSGREGA; ///<_CRT
- UINT8 MSGFun83zone2MSGREGB; ///<_PSV
-
- //EC LDN9 funtion 83 zone 3
- UINT8 MSGFun83zone3MSGREG0; ///<Thermal zone
- UINT8 MSGFun83zone3MSGREG1; ///<Thermal zone
- UINT8 MSGFun83zone3MSGREG2; ///<_AC0
- UINT8 MSGFun83zone3MSGREG3; ///<_AC1
- UINT8 MSGFun83zone3MSGREG4; ///<_AC2
- UINT8 MSGFun83zone3MSGREG5; ///<_AC3
- UINT8 MSGFun83zone3MSGREG6; ///<_AC4
- UINT8 MSGFun83zone3MSGREG7; ///<_AC5
- UINT8 MSGFun83zone3MSGREG8; ///<_AC6
- UINT8 MSGFun83zone3MSGREG9; ///<_AC7
- UINT8 MSGFun83zone3MSGREGA; ///<_CRT
- UINT8 MSGFun83zone3MSGREGB; ///<_PSV
-
- //EC LDN9 funtion 85 zone 0
- UINT8 MSGFun85zone0MSGREG0; ///<Thermal zone
- UINT8 MSGFun85zone0MSGREG1; ///<Thermal zone
- UINT8 MSGFun85zone0MSGREG2; ///<AL0 PWM level in percentage (0 - 100%)
- UINT8 MSGFun85zone0MSGREG3; ///<AL1 PWM level in percentage (0 - 100%)
- UINT8 MSGFun85zone0MSGREG4; ///<AL2 PWM level in percentage (0 - 100%)
- UINT8 MSGFun85zone0MSGREG5; ///<AL3 PWM level in percentage (0 - 100%)
- UINT8 MSGFun85zone0MSGREG6; ///<AL4 PWM level in percentage (0 - 100%)
- UINT8 MSGFun85zone0MSGREG7; ///<AL5 PWM level in percentage (0 - 100%)
- UINT8 MSGFun85zone0MSGREG8; ///<AL6 PWM level in percentage (0 - 100%)
- UINT8 MSGFun85zone0MSGREG9; ///<AL7 PWM level in percentage (0 - 100%)
-
- //EC LDN9 funtion 85 zone 1
- UINT8 MSGFun85zone1MSGREG0; ///<Thermal zone
- UINT8 MSGFun85zone1MSGREG1; ///<Thermal zone
- UINT8 MSGFun85zone1MSGREG2; ///<AL0 PWM level in percentage (0 - 100%)
- UINT8 MSGFun85zone1MSGREG3; ///<AL1 PWM level in percentage (0 - 100%)
- UINT8 MSGFun85zone1MSGREG4; ///<AL2 PWM level in percentage (0 - 100%)
- UINT8 MSGFun85zone1MSGREG5; ///<AL3 PWM level in percentage (0 - 100%)
- UINT8 MSGFun85zone1MSGREG6; ///<AL4 PWM level in percentage (0 - 100%)
- UINT8 MSGFun85zone1MSGREG7; ///<AL5 PWM level in percentage (0 - 100%)
- UINT8 MSGFun85zone1MSGREG8; ///<AL6 PWM level in percentage (0 - 100%)
- UINT8 MSGFun85zone1MSGREG9; ///<AL7 PWM level in percentage (0 - 100%)
-
- //EC LDN9 funtion 85 zone 2
- UINT8 MSGFun85zone2MSGREG0; ///<Thermal zone
- UINT8 MSGFun85zone2MSGREG1; ///<Thermal zone
- UINT8 MSGFun85zone2MSGREG2; ///<AL0 PWM level in percentage (0 - 100%)
- UINT8 MSGFun85zone2MSGREG3; ///<AL1 PWM level in percentage (0 - 100%)
- UINT8 MSGFun85zone2MSGREG4; ///<AL2 PWM level in percentage (0 - 100%)
- UINT8 MSGFun85zone2MSGREG5; ///<AL3 PWM level in percentage (0 - 100%)
- UINT8 MSGFun85zone2MSGREG6; ///<AL4 PWM level in percentage (0 - 100%)
- UINT8 MSGFun85zone2MSGREG7; ///<AL5 PWM level in percentage (0 - 100%)
- UINT8 MSGFun85zone2MSGREG8; ///<AL6 PWM level in percentage (0 - 100%)
- UINT8 MSGFun85zone2MSGREG9; ///<AL7 PWM level in percentage (0 - 100%)
-
- //EC LDN9 funtion 85 zone 3
- UINT8 MSGFun85zone3MSGREG0; ///<Thermal zone
- UINT8 MSGFun85zone3MSGREG1; ///<Thermal zone
- UINT8 MSGFun85zone3MSGREG2; ///<AL0 PWM level in percentage (0 - 100%)
- UINT8 MSGFun85zone3MSGREG3; ///<AL1 PWM level in percentage (0 - 100%)
- UINT8 MSGFun85zone3MSGREG4; ///<AL2 PWM level in percentage (0 - 100%)
- UINT8 MSGFun85zone3MSGREG5; ///<AL3 PWM level in percentage (0 - 100%)
- UINT8 MSGFun85zone3MSGREG6; ///<AL4 PWM level in percentage (0 - 100%)
- UINT8 MSGFun85zone3MSGREG7; ///<AL5 PWM level in percentage (0 - 100%)
- UINT8 MSGFun85zone3MSGREG8; ///<AL6 PWM level in percentage (0 - 100%)
- UINT8 MSGFun85zone3MSGREG9; ///<AL7 PWM level in percentage (0 - 100%)
-
- //EC LDN9 funtion 89 TEMPIN channel 0
- UINT8 MSGFun89zone0MSGREG0; ///<Thermal zone
- UINT8 MSGFun89zone0MSGREG1; ///<Thermal zone
- UINT8 MSGFun89zone0MSGREG2; ///<At DWORD bit 0-7
- UINT8 MSGFun89zone0MSGREG3; ///<At DWORD bit 15-8
- UINT8 MSGFun89zone0MSGREG4; ///<At DWORD bit 23-16
- UINT8 MSGFun89zone0MSGREG5; ///<At DWORD bit 31-24
- UINT8 MSGFun89zone0MSGREG6; ///<Ct DWORD bit 0-7
- UINT8 MSGFun89zone0MSGREG7; ///<Ct DWORD bit 15-8
- UINT8 MSGFun89zone0MSGREG8; ///<Ct DWORD bit 23-16
- UINT8 MSGFun89zone0MSGREG9; ///<Ct DWORD bit 31-24
- UINT8 MSGFun89zone0MSGREGA; ///<Mode bit 0-7
-
- //EC LDN9 funtion 89 TEMPIN channel 1
- UINT8 MSGFun89zone1MSGREG0; ///<Thermal zone
- UINT8 MSGFun89zone1MSGREG1; ///<Thermal zone
- UINT8 MSGFun89zone1MSGREG2; ///<At DWORD bit 0-7
- UINT8 MSGFun89zone1MSGREG3; ///<At DWORD bit 15-8
- UINT8 MSGFun89zone1MSGREG4; ///<At DWORD bit 23-16
- UINT8 MSGFun89zone1MSGREG5; ///<At DWORD bit 31-24
- UINT8 MSGFun89zone1MSGREG6; ///<Ct DWORD bit 0-7
- UINT8 MSGFun89zone1MSGREG7; ///<Ct DWORD bit 15-8
- UINT8 MSGFun89zone1MSGREG8; ///<Ct DWORD bit 23-16
- UINT8 MSGFun89zone1MSGREG9; ///<Ct DWORD bit 31-24
- UINT8 MSGFun89zone1MSGREGA; ///<Mode bit 0-7
-
- //EC LDN9 funtion 89 TEMPIN channel 2
- UINT8 MSGFun89zone2MSGREG0; ///<Thermal zone
- UINT8 MSGFun89zone2MSGREG1; ///<Thermal zone
- UINT8 MSGFun89zone2MSGREG2; ///<At DWORD bit 0-7
- UINT8 MSGFun89zone2MSGREG3; ///<At DWORD bit 15-8
- UINT8 MSGFun89zone2MSGREG4; ///<At DWORD bit 23-16
- UINT8 MSGFun89zone2MSGREG5; ///<At DWORD bit 31-24
- UINT8 MSGFun89zone2MSGREG6; ///<Ct DWORD bit 0-7
- UINT8 MSGFun89zone2MSGREG7; ///<Ct DWORD bit 15-8
- UINT8 MSGFun89zone2MSGREG8; ///<Ct DWORD bit 23-16
- UINT8 MSGFun89zone2MSGREG9; ///<Ct DWORD bit 31-24
- UINT8 MSGFun89zone2MSGREGA; ///<Mode bit 0-7
-
- //EC LDN9 funtion 89 TEMPIN channel 3
- UINT8 MSGFun89zone3MSGREG0; ///<Thermal zone
- UINT8 MSGFun89zone3MSGREG1; ///<Thermal zone
- UINT8 MSGFun89zone3MSGREG2; ///<At DWORD bit 0-7
- UINT8 MSGFun89zone3MSGREG3; ///<At DWORD bit 15-8
- UINT8 MSGFun89zone3MSGREG4; ///<At DWORD bit 23-16
- UINT8 MSGFun89zone3MSGREG5; ///<At DWORD bit 31-24
- UINT8 MSGFun89zone3MSGREG6; ///<Ct DWORD bit 0-7
- UINT8 MSGFun89zone3MSGREG7; ///<Ct DWORD bit 15-8
- UINT8 MSGFun89zone3MSGREG8; ///<Ct DWORD bit 23-16
- UINT8 MSGFun89zone3MSGREG9; ///<Ct DWORD bit 31-24
- UINT8 MSGFun89zone3MSGREGA; ///<Mode bit 0-7
-
- // FLAG for Fun83/85/89 support
- UINT16 IMCFUNSupportBitMap; /// Bit0=81FunZone0 support(1=On;0=Off); bit1-3=81FunZone1-Zone3;Bit4-7=83FunZone0-Zone3;Bit8-11=85FunZone0-Zone3;Bit11-15=89FunZone0-Zone3;
-} EC_struct;
-/** SBGPPPORTCONFIG - Southbridge GPP port config structure */
-typedef struct {
- UINT32 PortPresent:1; /**< Port connection
- * @par
- * @li <b>0</b> - Port doesn't have slot. No need to train the link
- * @li <b>1</b> - Port connection defined and needs to be trained
- */
- UINT32 PortDetected:1; /**< Link training status
- * @par
- * @li <b>0</b> - EP not detected
- * @li <b>1</b> - EP detected
- */
- UINT32 PortIsGen2:2; /**< Port link speed configuration
- * @par
- * @li <b>00</b> - Auto
- * @li <b>01</b> - Forced GEN1
- * @li <b>10</b> - Forced GEN2
- * @li <b>11</b> - Reserved
- */
-
- UINT32 PortHotPlug:1; /**< Support hot plug?
- * @par
- * @li <b>0</b> - No support
- * @li <b>1</b> - support
- */
-/** PortMisc - Reserved */
- UINT32 PortMisc:27;
-} SBGPPPORTCONFIG;
-
-/** CODECENTRY - Southbridge HD Audio OEM Codec structure */
-typedef struct _CODECENTRY {
-/** Nid - Reserved ?? */
- UINT8 Nid;
-/** Byte40 - Reserved ?? */
- UINT32 Byte40;
-} CODECENTRY;
-
-/** CODECTBLLIST - Southbridge HD Audio Codec table list */
-typedef struct _CODECTBLLIST {
-/** CodecID - Codec ID */
- UINT32 CodecID;
-/** CodecTablePtr - Codec table pointer */
- CODECENTRY* CodecTablePtr;
-} CODECTBLLIST;
-
-/** Sata Controller structure */
-typedef struct _SATAST {
- UINT8 SataController:1; /**< SataController
- * @par
- * Sata Controller
- * @li <b>0</b> - disable
- * @li <b>1</b> - enable
- */
- UINT8 SataIdeCombMdPriSecOpt:1; /**< SataIdeCombMdPriSecOpt - Reserved */
- UINT8 SataSetMaxGen2:1; /**< SataSetMaxGen2
- * @par
- * Sata Controller Set to Max Gen2 mode
- * @li <b>0</b> - disable
- * @li <b>1</b> - enable
- */
- UINT8 SataIdeCombinedMode:1; /**< SataIdeCombinedMode
- * @par
- * Sata IDE Controller set to Combined Mode
- * @li <b>0</b> - enable
- * @li <b>1</b> - disable
- */
-/** SATARefClkSel - Reserved */
- UINT8 SATARefClkSel:2; // 4:5
-/** SATARefDivSel - Reserved */
- UINT8 SATARefDivSel:2; // 6:7
-} SATAST;
-
-/** _USBST Controller structure
- *
- * Usb Ohci1 Contoller is define at BIT0
- * - 0:disable 1:enable
- * (Bus 0 Dev 18 Func0) *
- * Usb Ehci1 Contoller is define at BIT1
- * - 0:disable 1:enable
- * (Bus 0 Dev 18 Func2) *
- * Usb Ohci2 Contoller is define at BIT2
- * - 0:disable 1:enable
- * (Bus 0 Dev 19 Func0) *
- * Usb Ehci2 Contoller is define at BIT3
- * - 0:disable 1:enable
- * (Bus 0 Dev 19 Func2) *
- * Usb Ohci3 Contoller is define at BIT4
- * - 0:disable 1:enable
- * (Bus 0 Dev 22 Func0) *
- * Usb Ehci3 Contoller is define at BIT5
- * - 0:disable 1:enable
- * (Bus 0 Dev 22 Func2) *
- * Usb Ohci4 Contoller is define at BIT6
- * - 0:disable 1:enable
- * (Bus 0 Dev 20 Func5) *
- */
-typedef struct _USBST {
- UINT8 Ohci1:1; ///< Ohci0 controller - 0:disable, 1:enable
- UINT8 Ehci1:1; ///< Ehci1 controller - 0:disable, 1:enable
- UINT8 Ohci2:1; ///< Ohci2 controller - 0:disable, 1:enable
- UINT8 Ehci2:1; ///< Ehci2 controller - 0:disable, 1:enable
- UINT8 Ohci3:1; ///< Ohci3 controller - 0:disable, 1:enable
- UINT8 Ehci3:1; ///< Ehci3 controller - 0:disable, 1:enable
- UINT8 Ohci4:1; ///< Ohci4 controller - 0:disable, 1:enable
- UINT8 UTemp:1; ///< Reserved
-} USBST;
-
-/**
- * _AZALIAPIN - HID Azalia or GPIO define structure.
- *
- */
-typedef struct _AZALIAPIN {
- UINT8 AzaliaSdin0:2; /**< AzaliaSdin0
- * @par
- * SDIN0 is define at BIT0 & BIT1
- * @li <b>00</b> - GPIO PIN
- * @li <b>10</b> - As a Azalia SDIN pin
- */
- UINT8 AzaliaSdin1:2; /**< AzaliaSdin1
- * @par
- * SDIN0 is define at BIT2 & BIT3
- * @li <b>00</b> - GPIO PIN
- * @li <b>10</b> - As a Azalia SDIN pin
- */
- UINT8 AzaliaSdin2:2; /**< AzaliaSdin2
- * @par
- * SDIN0 is define at BIT4 & BIT5
- * @li <b>00</b> - GPIO PIN
- * @li <b>10</b> - As a Azalia SDIN pin
- */
- UINT8 AzaliaSdin3:2; /**< AzaliaSdin3
- * @par
- * SDIN0 is define at BIT6 & BIT7
- * @li <b>00</b> - GPIO PIN
- * @li <b>10</b> - As a Azalia SDIN pin
- */
-} AZALIAPIN;
-
-/** AMDSBCFG - Southbridge CIMx configuration structure (Main) */
-typedef struct _AMDSBCFG {
-/** StdHeader - Standard header for all AGESA/CIMx services. */
- AMD_CONFIG_PARAMS StdHeader;
-
-/** BuildParameters - The STATIC platform information for CIMx Module. */
- BUILDPARAM BuildParameters;
- //offset 90 bytes (32-121)
- //MsgXchgBiosCimx //offset 4 bytes (122-125)
- // SATA Configuration
-
- union /**< union - Reserved */
- { /**< SATAMODE - Sata Controller structure */
-/** SataModeReg - Reserved */
- UINT8 SataModeReg;
-/** SataMode - Reserved */
- SATAST SataMode;
- } SATAMODE;
-/** S3Resume - Flag of ACPI S3 Resume. */
- UINT8 S3Resume:1; // 8
-/** RebootRequired - Flag of Reboot system is required. */
- UINT8 RebootRequired:1; // 9
-/** SbSpiSpeedSupport - Reserved */
- UINT8 SbSpiSpeedSupport:1; // 10
-/**< SpreadSpectrum
- * @par
- * Spread Spectrum function
- * @li <b>0</b> - disable
- * @li <b>1</b> - enable
- */
- UINT8 SpreadSpectrum:1; // 11
-/** NbSbGen2 - Reserved */
- UINT8 NbSbGen2:1; // 12
- UINT8 GppGen2:1; // 13
- UINT8 GppMemWrImprove:1; // 14
-/** MsgXchgBiosCimxReserved - Reserved */
- UINT8 MsgXchgBiosCimxReserved:1; // 15 (BB USED)
-/**< SataClass - SATA Controller mode [16:18]
- * @par
- * @li <b>000</b> - Native IDE mode
- * @li <b>001</b> - RAID mode
- * @li <b>010</b> - AHCI mode
- * @li <b>011</b> - Legacy IDE mode
- * @li <b>100</b> - IDE->AHCI mode
- * @li <b>101</b> - AHCI mode as 4394 ID (AMD driver)
- * @li <b>110</b> - IDE->AHCI mode as 4394 ID (AMD driver)
- */
- UINT16 SataClass:3; // 16:18
-/**< Sata IDE Controller mode
- * @par
- * @li <b>0</b> - Legacy IDE mode
- * @li <b>1</b> - Native IDE mode
- */
- UINT16 SataIdeMode:1; // 19
-/**< SataEspPort - SATA port is external accessible on a signal only connector (eSATA:)
- * @par
- * @li <b> BIT0 </b> - PORT0 set as ESP port
- * @li <b> BIT1 </b> - PORT1 set as ESP port
- * @li <b> BIT2 </b> - PORT2 set as ESP port
- * @li <b> BIT3 </b> - PORT3 set as ESP port
- * @li <b> BIT4 </b> - PORT4 set as ESP port
- * @li <b> BIT5 </b> - PORT5 set as ESP port
- */
- UINT16 SataEspPort:6; // 20:25
-/** SataPortPower - Reserved */
- UINT16 SataPortPower:6; // 31:26
-
- // SATA Debug Option //offset 4 bytes (126-129)
-
-/**< SataPortMode - Force Each PORT to GEN1/GEN2 mode
- * @par
- * @li <b> 0 </b> Auto for each PORTs
- * @li <b> BIT0 = 1</b> - PORT0 set to GEN1
- * @li <b> BIT1 = 1</b> - PORT0 set to GEN2
- * @li <b> BIT2 = 1</b> - PORT1 set to GEN1
- * @li <b> BIT3 = 1</b> - PORT1 set to GEN2
- * @li <b> BIT4 = 1</b> - PORT2 set to GEN1
- * @li <b> BIT5 = 1</b> - PORT2 set to GEN2
- * @li <b> BIT6 = 1</b> - PORT3 set to GEN1
- * @li <b> BIT7 = 1</b> - PORT3 set to GEN2
- * @li <b> BIT8 = 1</b> - PORT4 set to GEN1
- * @li <b> BIT9 = 1</b> - PORT4 set to GEN2
- * @li <b> BIT10 = 1</b> - PORT5 set to GEN1
- * @li <b> BIT11 = 1</b> - PORT5 set to GEN2
- */
- UINT32 SataPortMode:12; //11:0
-/** SATAClkSelOpt - Reserved */
- UINT32 SATAClkSelOpt:4; // Removed from coding side
-/** SataAggrLinkPmCap - Reserved */
- UINT32 SataAggrLinkPmCap:1; //16, 0:OFF 1:ON
-/** SataPortMultCap - Reserved */
- UINT32 SataPortMultCap:1; //17, 0:OFF 1:ON
-/** SataClkAutoOff - Reserved */
- UINT32 SataClkAutoOff:1; //18, AutoClockOff 0:Disabled, 1:Enabled
-/** SataPscCap - Reserved */
- UINT32 SataPscCap:1; //19, 0:Enable PSC capability, 1:Disable PSC capability
-/** BIOSOSHandoff - Reserved */
- UINT32 BIOSOSHandoff:1; //20
-/** SataFisBasedSwitching - Reserved */
- UINT32 SataFisBasedSwitching:1; //21
-/** SataCccSupport - Reserved */
- UINT32 SataCccSupport:1; //22
-/** SataSscCap - Reserved */
- UINT32 SataSscCap:1; //23, 0:Enable SSC capability, 1:Disable SSC capability
-/** SataMsiCapability - Reserved */
- UINT32 SataMsiCapability:1; //24 0:Hidden 1:Visible. This feature is disabled per RPR, but remains the interface.
-/** SataForceRaid - Reserved */
- UINT32 SataForceRaid:1; //25 0:No function 1:Force RAID
-/** SataDebugDummy - Reserved */
- UINT32 SataDebugDummy:6; //31:26
-//
-// USB Configuration //offset 4 bytes (130-133)
-//
-
-/** USBDeviceConfig - USB Controller Configuration
- *
- * - Usb Ohci1 Contoller is define at BIT0
- * - 0:disable 1:enable
- * (Bus 0 Dev 18 Func0) *
- * - Usb Ehci1 Contoller is define at BIT1
- * - 0:disable 1:enable
- * (Bus 0 Dev 18 Func2) *
- * - Usb Ohci2 Contoller is define at BIT2
- * - 0:disable 1:enable
- * (Bus 0 Dev 19 Func0) *
- * - Usb Ehci2 Contoller is define at BIT3
- * - 0:disable 1:enable
- * (Bus 0 Dev 19 Func2) *
- * - Usb Ohci3 Contoller is define at BIT4
- * - 0:disable 1:enable
- * (Bus 0 Dev 22 Func0) *
- * - Usb Ehci3 Contoller is define at BIT5
- * - 0:disable 1:enable
- * (Bus 0 Dev 22 Func2) *
- * - Usb Ohci4 Contoller is define at BIT6
- * - 0:disable 1:enable
- * (Bus 0 Dev 20 Func5) *
- */
- union /**< union - Reserved */
- { /**< USBMODE - USB Controller structure */
-/** SataModeReg - Reserved */
- UINT8 UsbModeReg;
-/** SataMode - Reserved */
- USBST UsbMode;
- } USBMODE;
-/*!
- */
-
-/**< GecConfig
- * @par
- * InChip Gbit NIC
- * @li <b>1</b> - disable
- * @li <b>0</b> - enable
- */
- UINT8 GecConfig:1; //8
-
-/**< IrConfig
- * @par
- * Ir Controller setting
- * @li <b>00 </b> - disable
- * @li <b>01 </b> - Rx and Tx0
- * @li <b>10 </b> - Rx and Tx1
- * @li <b>11 </b> - Rx and both Tx0,Tx1
- */
- UINT8 IrConfig:2; //9:10
-
-/** GecDummy - Reserved */
- UINT8 GecDummy:5; //15:11
-
- //Azalia Configuration
-
-/**< AzaliaController - Azalia Controller Configuration
- * @par
- * Azalia Controller [0-1]
- * @li <b>0</b> - Auto : Detect Azalia controller automatically.
- * @li <b>1</b> - Diable : Disable Azalia controller.
- * @li <b>2</b> - Enable : Enable Azalia controller.
- */
- UINT8 AzaliaController:2; //17:16
-/**< AzaliaPinCfg - Azalia Controller SDIN pin Configuration
- * @par
- * @li <b>0</b> - disable
- * @li <b>1</b> - enable
- */
- UINT8 AzaliaPinCfg:1; //18
-/**< AzaliaFrontPanel - Azalia Controller Front Panel Configuration
- * @par
- * Support Front Panel configuration
- * @li <b>0</b> - Auto
- * @li <b>1</b> - disable
- * @li <b>2</b> - enable
- */
- UINT8 AzaliaFrontPanel:2; //20:19
-/**< FrontPanelDetected - Force Azalia Controller Front Panel Configuration
- * @par
- * Force Front Panel configuration
- * @li <b>0</b> - Not Detected
- * @li <b>1</b> - Detected
- */
- UINT8 FrontPanelDetected:1; //21
-/**< AzaliaSnoop - Azalia Controller Snoop feature Configuration
- * @par
- * Azalia Controller Snoop feature Configuration
- * @li <b>0</b> - disable
- * @li <b>1</b> - enable
- */
- UINT8 AzaliaSnoop:1; //22
-/** AzaliaDummy - Reserved */
- UINT8 AzaliaDummy:1; //23
-
- union
- {
-/**< AzaliaSdinPin - Azalia Controller SDIN pin Configuration
- *
- * SDIN0 is define at BIT0 & BIT1
- * - 00: GPIO PIN
- * - 01: Reserved
- * - 10: As a Azalia SDIN pin
- *
- * SDIN1 is define at BIT2 & BIT3
- * * Config same as SDIN0
- * SDIN2 is define at BIT4 & BIT5
- * * Config same as SDIN0
- * SDIN3 is define at BIT6 & BIT7
- * * Config same as SDIN0
- */
- UINT8 AzaliaSdinPin;
- AZALIAPIN AzaliaConfig;
- } AZALIACONFIG;
-
-/** AZOEMTBL - Azalia Controller OEM Codec Table Pointer
- *
- */
- union
- {
- PLACEHOLDER PlaceHolder;
- CODECTBLLIST* pAzaliaOemCodecTablePtr; //offset 4 bytes (134-137)
- } AZOEMTBL;
-
-/** AZOEMFPTBL - Azalia Controller Front Panel OEM Table Pointer
- *
- */
- union
- {
- PLACEHOLDER PlaceHolder;
- VOID* pAzaliaOemFpCodecTablePtr; //offset 4 bytes (138-141)
- } AZOEMFPTBL;
-
- //Miscellaneous Configuration //offset 4 bytes (142-145)
-/** AnyHT200MhzLink - Reserved */
- UINT32 AnyHT200MhzLink:1; //0
-/**< HpetTimer - South Bridge Hpet Timer Configuration
- * @par
- * @li <b>0</b> - disable
- * @li <b>1</b> - enable
- */
- UINT32 HpetTimer:1; //1
-/**< PciClks - PCI Slot Clock Control
- * @par
- * PCI SLOT 0 define at BIT0
- * - 00: disable
- * - 01: enable
- *
- * PCI SLOT 1 define at BIT1
- * * Config same as PCI SLOT0
- * PCI SLOT 2 define at BIT2
- * * Config same as PCI SLOT0
- * PCI SLOT 3 define at BIT3
- * * Config same as PCI SLOT0
- * PCI SLOT 4 define at BIT4
- * * Config same as PCI SLOT0
- */
- UINT32 PciClks:5; //2:6
-/** MiscReserved1 - Reserved */
- UINT32 MiscReserved1:4; //9:7, Reserved
-/** MobilePowerSavings - Debug function Reserved */
- UINT32 MobilePowerSavings:1; //11, 0:Disable, 1:Enable Power saving features especially for Mobile platform
-/** MiscDummy1 - Debug function Reserved */
- UINT32 MiscDummy1:1;
-/** NativePcieSupport - Debug function Reserved */
- UINT32 NativePcieSupport:1; //13, 0:Enable, 1:Disabled
-/** FlashPinConfig - Debug function Reserved */
- UINT32 FlashPinConfig:1; //14, 0:desktop mode 1:mobile mode
-/** UsbPhyPowerDown - Debug function Reserved */
- UINT32 UsbPhyPowerDown:1; //15
-/** PcibClkStopOverride - Debug function Reserved */
- UINT32 PcibClkStopOverride:10; //25:16
-/**< HpetMsiDis - South Bridge HPET MSI Configuration
- * @par
- * @li <b>1</b> - disable
- * @li <b>0</b> - enable
- */
- UINT32 HpetMsiDis:1; //26
-/**< ResetCpuOnSyncFlood - Rest CPU on Sync Flood
- * @par
- * @li <b>0</b> - disable
- * @li <b>1</b> - enable
- */
- UINT32 ResetCpuOnSyncFlood:1; //27
-/**< LdtStpDisable - LdtStp# output disable
- * @par
- * @li <b>0</b> - LdtStp# output enable
- * @li <b>1</b> - LdtStp# output disable
- */
- UINT32 LdtStpDisable:1; //28
-/**< MTC1e - Message Triggered C1e
- * @par
- * @li <b>0</b> - disable
- * @li <b>1</b> - enable
- */
- UINT32 MTC1e:1; //29
-/** MiscDummy - Reserved */
- UINT32 MiscDummy:2; //31:30
-
- //DebugOptions //offset 4 bytes (146-149)
-/** PcibAutoClkCtrlLow - Debug function Reserved */
- UINT32 PcibAutoClkCtrlLow:16;
-/** PcibAutoClkCtrlHigh - Debug function Reserved */
- UINT32 PcibAutoClkCtrlHigh:16;
-
-/**< OEMPROGTBL - ACPI MMIO register setting table OEM override
- * @par
- * OEM table for customer override ACPI MMIO register in their code.
- */
- union
- {
- PLACEHOLDER OemProgrammingTablePtr; //offset 4 bytes (150-153)
- VOID *OemProgrammingTablePtr_Ptr;
- } OEMPROGTBL;
-
- //Gpp Configuration //offset 24 bytes total (154-177)
- union {
- UINT32 PORTCFG32;
- SBGPPPORTCONFIG PortCfg;
- } PORTCONFIG[MAX_GPP_PORTS]; //offset 16 bytes
-
- UINT32 GppLinkConfig; // GPP_LINK_CONFIG = PCIE_GPP_Enable[3:0]
- // 0000 - Port ABCD -> 4:0:0:0
- // 0001 - N/A
- // 0010 - Port ABCD -> 2:2:0:0
- // 0011 - Port ABCD -> 2:1:1:0
- // 0100 - Port ABCD -> 1:1:1:1
- //
- UINT32 GppFoundGfxDev:4; //3:0 If port A-D (mapped to bit [3:0]) has GFX EP detected
- UINT32 CoreGen2Enable:1; //4
- UINT32 GppFunctionEnable:1; //5
- UINT32 GppUnhidePorts:1; //6
- UINT32 AlinkPhyPllPowerDown:1; //7
- UINT32 GppConfigDummy1:2; //9:8
- UINT32 GppLaneReversal:1; //10
- UINT32 GppPhyPllPowerDown:1; //11
- UINT32 GppCompliance :1; //12
- UINT32 GppPortAspm:8; //20:13 ASPM state for GPP ports, 14:13 for port0, ..., 20:19 for port3
- // 00 - Disabled
- // 01 - L0s
- // 10 - L1
- // 11 - L0s + L1
- //
- UINT32 GppConfigDummy:11; //31:21
-
- //TempMMIO //offset 4 bytes (178-181)
- UINT32 TempMMIO;
-
- // DebugOption2
- UINT32 GecPhyStatus:1;
- UINT32 GecDebugOptionDummy:7;
- UINT32 SBGecPwr:2;
- UINT32 SBGecDebugBus:1;
- UINT32 DebugOption2Dummy1:1;
- UINT32 DebugOption2Dummy2:1;
- UINT32 SbPcieOrderRule:1;
- UINT32 SbUsbPll:1;
- UINT32 AcDcMsg:1;
- UINT32 TimerTickTrack:1;
- UINT32 ClockInterruptTag:1;
- UINT32 OhciTrafficHanding:1;
- UINT32 EhciTrafficHanding:1;
- UINT32 FusionMsgCMultiCore:1;
- UINT32 FusionMsgCStage:1;
-/**< UsbRxMode - CG PLL multiplier for USB Rx 1.1 mode
- * @par
- * @li <b>0</b> - disable
- * @li <b>1</b> - enable
- */
- UINT32 UsbRxMode:1;
- UINT32 DebugOption2Dummy3:9; //
-
- union
- {
- PLACEHOLDER DynamicGecRomAddressPtr; //offset 4 bytes (182-185)
- VOID *DynamicGecRomAddress_Ptr;
- } DYNAMICGECROM;
- EC_struct Pecstruct;
-} AMDSBCFG;
-
-/** SMMSERVICESTRUC- Southbridge SMI service structure */
-typedef struct _SMMSERVICESTRUC {
-/** enableRegNum - Reserved */
- UINT8 enableRegNum;
-/** enableBit - Reserved */
- UINT8 enableBit;
-/** statusRegNum - Reserved */
- UINT8 statusRegNum;
-/** statusBit - Reserved */
- UINT8 statusBit;
-/** *debugMessage- Reserved */
- CHAR8 *debugMessage;
-/** serviceRoutine - Reserved */
- SMM_SERVICE_ROUTINE serviceRoutine;
-} SMMSERVICESTRUC;
-
-#ifndef _NB_REG8MASK_
-
-/**
- * - Byte Register R/W structure
- *
- */
- typedef struct _Reg8Mask {
-/** bRegIndex - Reserved */
- UINT8 bRegIndex;
-/** bANDMask - Reserved */
- UINT8 bANDMask;
-/** bORMask - Reserved */
- UINT8 bORMask;
- } REG8MASK;
-#endif
-
-/**
- * - SATA Phy setting structure
- *
- */
-typedef struct _SATAPHYSETTING {
-/** wPhyCoreControl - Reserved */
- UINT16 wPhyCoreControl;
-/** dwPhyFineTune - Reserved */
- UINT32 dwPhyFineTune;
-} SATAPHYSETTING;
-
-/**
- * _ABTblEntry - AB link register table R/W structure
- *
- */
-typedef struct _ABTblEntry {
- /** regType : AB Register Type (ABCFG, AXCFG and so on) */
- UINT8 regType;
- /** regIndex : AB Register Index */
- UINT32 regIndex;
- /** regMask : AB Register Mask */
- UINT32 regMask;
- /** regData : AB Register Data */
- UINT32 regData;
-} ABTBLENTRY;
-
-/**
- * _AcpiRegWrite - ACPI MMIO register R/W structure
- *
- */
-typedef struct _AcpiRegWrite {
- /** MmioBase : Index of Soubridge block (For instence GPIO_BASE:0x01 SMI_BASE:0x02) */
- UINT8 MmioBase;
- /** MmioReg : Register index */
- UINT8 MmioReg;
- /** DataANDMask : AND Register Data */
- UINT8 DataANDMask;
- /** DataOrMask : Or Register Data */
- UINT8 DataOrMask;
-} AcpiRegWrite;
-
-/**
- * PCI_ADDRESS - PCI access structure
- *
- */
-#define PCI_ADDRESS(bus, dev, func, reg) \
-(UINT32) ( (((UINT32)bus) << 24) + (((UINT32)dev) << 19) + (((UINT32)func) << 16) + ((UINT32)reg) )
-
-/**
- * CIM_STATUS - CIMx module function return code
- */
-typedef UINT32 CIM_STATUS;
-/**
- * CIM_SUCCESS - Executed without error
- */
-#define CIM_SUCCESS 0x00000000
-/**
- * CIM_ERROR - call error
- */
-#define CIM_ERROR 0x80000000
-/**
- * CIM_UNSUPPORTED - function does not support
- */
-#define CIM_UNSUPPORTED 0x80000001
-
-#pragma pack (pop)
-
-/**
- * DISABLED - Define disable in module
- */
-#define DISABLED 0
-/**
- * ENABLED - Define enable in module
- */
-#define ENABLED 1
-
-// mov al, code
-// out 80h, al
-// jmp $
-
-/**
- * DBG_STOP - define a debug point
- */
-#define DBG_STOP __asm _emit 0xEB __asm _emit 0xFE
-
-/**
- * STOP_CODE - define a debug point
- * Warning: AL gets destroyed!
- */
-#define STOP_CODE (code) __asm __emit 0xB0 __asm __emit code __asm __emit 0xE6 \
- __asm __emit 0x80 __asm _emit 0xEB __asm _emit 0xFE
-
-#endif // _AMD_SBTYPE_H_
diff --git a/src/vendorcode/amd/cimx/sb800/SMM.c b/src/vendorcode/amd/cimx/sb800/SMM.c deleted file mode 100644 index 0eca753219..0000000000 --- a/src/vendorcode/amd/cimx/sb800/SMM.c +++ /dev/null @@ -1,76 +0,0 @@ -/**
- * @file
- *
- * Southbridge SMM service function
- *
- * Prepare SMM service module for IBV call Southbridge SMI service routine.
- *
- * @xrefitem bom "File Content Label" "Release Content"
- * @e project: CIMx-SB
- * @e sub-project:
- * @e \$Revision:$ @e \$Date:$
- *
- */
-/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-#include "SBPLATFORM.h"
-
-//
-// Declaration of local functions
-//
-
-/**
- * Southbridge SMI service module
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-sbSmmService (
- IN AMDSBCFG* pConfig
- )
-{
- AMDSBCFG* pTmp; //lx-dummy for /W4 build
- pTmp = pConfig;
-}
-
-/**
- * softwareSMIservice - Software SMI service
- *
- * @param[in] VOID Southbridge software SMI service ID.
- *
- */
-VOID
-softwareSMIservice (
- IN VOID
- )
-{
-}
-
-
-
-
-
diff --git a/src/vendorcode/amd/cimx/sb800/SbModInf.c b/src/vendorcode/amd/cimx/sb800/SbModInf.c deleted file mode 100644 index 45259ee194..0000000000 --- a/src/vendorcode/amd/cimx/sb800/SbModInf.c +++ /dev/null @@ -1,64 +0,0 @@ -/**
- * @file
- *
- * Function dispatcher.
- *
- *
- *
- * @xrefitem bom "File Content Label" "Release Content"
- * @e project: CIMx-SB
- * @e sub-project:
- * @e \$Revision:$ @e \$Date:$
- *
- */
-/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-/*----------------------------------------------------------------------------------------
- * M O D U L E S U S E D
- *----------------------------------------------------------------------------------------
- */
-
-#include "SBPLATFORM.h"
-
-/*----------------------------------------------------------------------------------------
- * P R O T O T Y P E S O F L O C A L F U N C T I O N S
- *----------------------------------------------------------------------------------------
- */
-
-
-/*----------------------------------------------------------------------------------------
- * D E F I N I T I O N S A N D M A C R O S
- *----------------------------------------------------------------------------------------
- */
-
-
-
-/// module header
-VOLATILE AMD_MODULE_HEADER mNbModuleHeader = {
- 'DOM$', ///< Standard AMD module signature
- CIMX_SB_ID, ///< Chipset ID
- CIMX_SB_REVISION, ///< CIMx version
- AmdSbDispatcher, ///< Pointer to the module entry
- NULL ///< Pointer link to next module header
-};
diff --git a/src/vendorcode/amd/cimx/sb800/USB.c b/src/vendorcode/amd/cimx/sb800/USB.c deleted file mode 100644 index 2d99358e39..0000000000 --- a/src/vendorcode/amd/cimx/sb800/USB.c +++ /dev/null @@ -1,421 +0,0 @@ -/**
- * @file
- *
- * Config Southbridge USB controller
- *
- * Init USB features.
- *
- * @xrefitem bom "File Content Label" "Release Content"
- * @e project: CIMx-SB
- * @e sub-project:
- * @e \$Revision:$ @e \$Date:$
- *
- */
-/*
- *****************************************************************************
- *
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * ***************************************************************************
- *
- */
-
-
-#include "SBPLATFORM.h"
-
-//
-// Declaration of local functions
-//
-
-/**
- * EhciInitAfterPciInit - Config USB controller after PCI emulation
- *
- * @param[in] Value Controller PCI config address (bus# + device# + function#)
- * @param[in] pConfig Southbridge configuration structure pointer.
- */
-VOID EhciInitAfterPciInit (IN UINT32 Value, IN AMDSBCFG* pConfig);
-/**
- * OhciInitAfterPciInit - Config USB OHCI controller after PCI emulation
- *
- * @param[in] Value Controller PCI config address (bus# + device# + function#)
- * @param[in] pConfig Southbridge configuration structure pointer.
- */
-VOID OhciInitAfterPciInit (IN UINT32 Value, IN AMDSBCFG* pConfig);
-
-/**
- * SetEhciP11Wr - FIXME
- *
- * @param[in] Value Controller PCI config address (bus# + device# + function#)
- * @param[in] pConfig Southbridge configuration structure pointer.
- */
-UINT32 SetEhciPllWr (IN UINT32 Value, IN AMDSBCFG* pConfig);
-
-
-/**
- * usbInitBeforePciEnum - Config USB controller before PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-usbInitBeforePciEnum (
- IN AMDSBCFG* pConfig
- )
-{
- // Disabled All USB controller
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEF, AccWidthUint8, BIT7, 0);
- // Clear PM_IO 0x65[4] UsbResetByPciRstEnable, Set this bit so that usb gets reset whenever there is PCIRST.
- // Enable UsbResumeEnable (USB PME) * Default value
- // In SB700 USB SleepCtrl set as BIT10+BIT9, but SB800 default is BIT9+BIT8 (6 uframes)
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF0, AccWidthUint16 | S3_SAVE, ~BIT2, BIT2 + BIT7 + BIT8 + BIT9);
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEF, AccWidthUint8, 0, pConfig->USBMODE.UsbModeReg);
-}
-
-/**
- * usbInitAfterPciInit - Config USB controller after PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-usbInitAfterPciInit (
- IN AMDSBCFG* pConfig
- )
-{
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGED, AccWidthUint8, ~BIT1, BIT1);
-
- usb1EhciInitAfterPciInit (pConfig);
- usb2EhciInitAfterPciInit (pConfig);
- usb3EhciInitAfterPciInit (pConfig);
- usb1OhciInitAfterPciInit (pConfig);
- usb2OhciInitAfterPciInit (pConfig);
- usb3OhciInitAfterPciInit (pConfig);
- usb4OhciInitAfterPciInit (pConfig);
-
- if ( pConfig->UsbPhyPowerDown ) {
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF0, AccWidthUint8, ~BIT0, BIT0);
- } else
- {
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF0, AccWidthUint8, ~BIT0, 0);
- }
-
-}
-
-/**
- * usb1EhciInitAfterPciInit - Config USB1 EHCI controller after PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-usb1EhciInitAfterPciInit (
- IN AMDSBCFG* pConfig
- )
-{
- UINT32 ddDeviceId;
- ddDeviceId = (USB1_EHCI_BUS_DEV_FUN << 16);
- EhciInitAfterPciInit (ddDeviceId, pConfig);
-}
-
-/**
- * usb2EhciInitAfterPciInit - Config USB2 EHCI controller after PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-usb2EhciInitAfterPciInit (
- IN AMDSBCFG* pConfig
- )
-{
- UINT32 ddDeviceId;
- ddDeviceId = (USB2_EHCI_BUS_DEV_FUN << 16);
- EhciInitAfterPciInit (ddDeviceId, pConfig);
-}
-
-/**
- * usb3EhciInitAfterPciInit - Config USB3 EHCI controller after PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-usb3EhciInitAfterPciInit (
- IN AMDSBCFG* pConfig
- )
-{
- UINT32 ddDeviceId;
- ddDeviceId = (USB3_EHCI_BUS_DEV_FUN << 16);
- EhciInitAfterPciInit (ddDeviceId, pConfig);
-}
-
-VOID
-EhciInitAfterPciInit (
- IN UINT32 Value,
- IN AMDSBCFG* pConfig
- )
-{
- UINT32 ddBarAddress;
- UINT32 ddVar;
- //Get BAR address
- ReadPCI ((UINT32) Value + SB_EHCI_REG10, AccWidthUint32, &ddBarAddress);
- if ( (ddBarAddress != - 1) && (ddBarAddress != 0) ) {
- //Enable Memory access
- RWPCI ((UINT32) Value + SB_EHCI_REG04, AccWidthUint8, 0, BIT1);
- if (pConfig->BuildParameters.EhciSsid != NULL ) {
- RWPCI ((UINT32) Value + SB_EHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pConfig->BuildParameters.EhciSsid);
- }
- //USB Common PHY CAL & Control Register setting
- ddVar = 0x00020F00;
- WriteMEM (ddBarAddress + SB_EHCI_BAR_REGC0, AccWidthUint32, &ddVar);
- // RPR IN AND OUT DATA PACKET FIFO THRESHOLD
- // EHCI BAR 0xA4 //IN threshold bits[7:0]=0x40 //OUT threshold bits[23:16]=0x40
- RWMEM (ddBarAddress + SB_EHCI_BAR_REGA4, AccWidthUint32, 0xFF00FF00, 0x00400040);
- // RPR EHCI Dynamic Clock Gating Feature
- RWMEM (ddBarAddress + SB_EHCI_BAR_REGBC, AccWidthUint32, ~BIT12, 0);
- // RPR Enable adding extra flops to PHY rsync path
- // Step 1:
- // EHCI_BAR 0xB4 [6] = 1
- // EHCI_BAR 0xB4 [7] = 0
- // EHCI_BAR 0xB4 [12] = 0 ("VLoad")
- // All other bit field untouched
- // Step 2:
- // EHCI_BAR 0xB4[12] = 1
- RWMEM (ddBarAddress + SB_EHCI_BAR_REGB4, AccWidthUint32, ~(BIT6 + BIT7 + BIT12), 0x00);
- RWMEM (ddBarAddress + SB_EHCI_BAR_REGB4, AccWidthUint32, ~BIT12, BIT12);
- //Set EHCI_pci_configx50[6]='1' to disable EHCI MSI support
- //RPR recommended setting "EHCI Async Park Mode"
- //Set EHCI_pci_configx50[23]='0' to enable "EHCI Async Park Mode support"
- //RPR Enabling EHCI Async Stop Enhancement
- //Set EHCI_pci_configx50[29]='1' to disableEnabling EHCI Async Stop Enhancement
- RWPCI ((UINT32) Value + SB_EHCI_REG50, AccWidthUint32 | S3_SAVE, ~(BIT23), BIT29 + BIT23 + BIT8 + BIT6);
- // RPR recommended setting "EHCI Advance PHY Power Savings"
- // Set EHCI_pci_configx50[31]='1'
- // Fix for EHCI controller driver yellow sign issue under device manager
- // when used in conjunction with HSET tool driver. EHCI PCI config 0x50[20]=1
- RWPCI ((UINT32) Value + SB_EHCI_REG50 + 2, AccWidthUint16 | S3_SAVE, (UINT16)0xFFFF, BIT15);
- // RPR USB Delay A-Link Express L1 State
- // RPR PING Response Fix Enable EHCI_PCI_Config x54[1] = 1
- // RPR Empty-list Detection Fix Enable EHCI_PCI_Config x54[3] = 1
- RWPCI ((UINT32) Value + SB_EHCI_REG54, AccWidthUint32 | S3_SAVE, ~BIT0, BIT0);
- if ( pConfig->BuildParameters.UsbMsi) {
- RWPCI ((UINT32) Value + SB_EHCI_REG50, AccWidthUint32 | S3_SAVE, ~BIT6, 0x00);
- }
- }
-}
-
-/**
- * usb1OhciInitAfterPciInit - Config USB1 OHCI controller after PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-usb1OhciInitAfterPciInit (
- IN AMDSBCFG* pConfig
- )
-{
- UINT32 ddDeviceId;
- ddDeviceId = (USB1_OHCI_BUS_DEV_FUN << 16);
- OhciInitAfterPciInit (ddDeviceId, pConfig);
-}
-
-/**
- * usb2OhciInitAfterPciInit - Config USB2 OHCI controller after PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-usb2OhciInitAfterPciInit (
- IN AMDSBCFG* pConfig
- )
-{
- UINT32 ddDeviceId;
- ddDeviceId = (USB2_OHCI_BUS_DEV_FUN << 16);
- OhciInitAfterPciInit (ddDeviceId, pConfig);
-}
-
-/**
- * usb3OhciInitAfterPciInit - Config USB3 OHCI controller after PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-usb3OhciInitAfterPciInit (
- IN AMDSBCFG* pConfig
- )
-{
- UINT32 ddDeviceId;
- ddDeviceId = (USB3_OHCI_BUS_DEV_FUN << 16);
- OhciInitAfterPciInit (ddDeviceId, pConfig);
-}
-
-/**
- * usb4OhciInitAfterPciInit - Config USB4 OHCI controller after PCI emulation
- *
- *
- *
- * @param[in] pConfig Southbridge configuration structure pointer.
- *
- */
-VOID
-usb4OhciInitAfterPciInit (
- IN AMDSBCFG* pConfig
- )
-{
- UINT32 ddDeviceId;
- ddDeviceId = (USB4_OHCI_BUS_DEV_FUN << 16);
- OhciInitAfterPciInit (ddDeviceId, pConfig);
- if (pConfig->BuildParameters.Ohci4Ssid != NULL ) {
- RWPCI ((USB4_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pConfig->BuildParameters.Ohci4Ssid);
- }
-}
-
-VOID
-OhciInitAfterPciInit (
- IN UINT32 Value,
- IN AMDSBCFG* pConfig
- )
-{
- // Disable the MSI capability of USB host controllers
- RWPCI ((UINT32) Value + SB_OHCI_REG40 + 1, AccWidthUint8 | S3_SAVE, 0xFF, BIT0);
- RWPCI ((UINT32) Value + SB_OHCI_REG50, AccWidthUint8 | S3_SAVE, ~(BIT5 + BIT12), 0x00);
- // RPR USB SMI Handshake
- RWPCI ((UINT32) Value + SB_OHCI_REG50 + 1, AccWidthUint8 | S3_SAVE, ~BIT4, 0x00);
- // SB02186
- RWPCI ((UINT32) Value + SB_OHCI_REG50 + 1, AccWidthUint8 | S3_SAVE, 0xFC, 0x00);
- if (Value != (USB4_OHCI_BUS_DEV_FUN << 16)) {
- if ( pConfig->BuildParameters.OhciSsid != NULL ) {
- RWPCI ((UINT32) Value + SB_OHCI_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pConfig->BuildParameters.OhciSsid);
- }
- }
- //RPR recommended setting to, enable fix to cover the corner case S3 wake up issue from some USB 1.1 devices
- //OHCI 0_PCI_Config 0x50[30] = 1
- RWPCI ((UINT32) Value + SB_OHCI_REG50 + 3, AccWidthUint8 | S3_SAVE, ~BIT6, BIT6);
- if ( pConfig->BuildParameters.UsbMsi) {
- RWPCI ((UINT32) Value + SB_OHCI_REG40 + 1, AccWidthUint8 | S3_SAVE, ~BIT0, 0x00);
- RWPCI ((UINT32) Value + SB_OHCI_REG50, AccWidthUint8 | S3_SAVE, ~BIT5, BIT5);
- }
-}
-
-
-UINT32
-SetEhciPllWr (
- IN UINT32 Value,
- IN AMDSBCFG* pConfig
- )
-{
- UINT32 ddRetureValue;
- UINT32 ddBarAddress;
- UINT16 dwVar;
- UINT16 dwData;
- UINT8 portSC;
- ddRetureValue = 0;
- dwData = 0;
- // Memory, and etc.
- //_asm { jmp $};
- RWPCI ((UINT32) Value + 0xC4, AccWidthUint8, 0xF0, 0x00);
- RWPCI ((UINT32) Value + 0x04, AccWidthUint8, 0xFF, 0x02);
- // Get Bar address
- ReadPCI ((UINT32) Value + 0x10, AccWidthUint32, &ddBarAddress);
- for (portSC = 0x64; portSC < 0x75; portSC += 0x04 ) {
- // Get OHCI command registers
- ReadMEM (ddBarAddress + portSC, AccWidthUint16, &dwVar);
- if ( dwVar & BIT6 ) {
- ddRetureValue = ddBarAddress + portSC;
- RWMEM (ddBarAddress + portSC, AccWidthUint16, ~BIT6, 0);
- for (;;) {
- SbStall (5);
- ReadMEM (ddBarAddress + portSC, AccWidthUint16, &dwData);
- if (dwData == 0x1005) break;
- }
- dwData = 0;
- }
- }
- return ddRetureValue;
-}
-
-VOID
-usbSetPllDuringS3 (
- IN AMDSBCFG* pConfig
- )
-{
- UINT32 resumeEhciPortTmp;
- UINT32 resumeEhciPort;
- resumeEhciPortTmp = 0;
- resumeEhciPort = 0;
-// UINT32 ddDeviceId;
-//if Force Port Resume == 1
-// {
-// clear Force Port Resume;
-// while (!(PORTSC == 0x1005)){wait 5 us; read PORTSC;}
-// }
- if (pConfig->USBMODE.UsbModeReg & BIT1) {
- resumeEhciPortTmp = SetEhciPllWr (USB1_EHCI_BUS_DEV_FUN << 16, pConfig);
- if (resumeEhciPortTmp > 0) resumeEhciPort = resumeEhciPortTmp;
- }
- if (pConfig->USBMODE.UsbModeReg & BIT3) {
- resumeEhciPortTmp = SetEhciPllWr (USB2_EHCI_BUS_DEV_FUN << 16, pConfig);
- if (resumeEhciPortTmp > 0) resumeEhciPort = resumeEhciPortTmp;
- }
- if (pConfig->USBMODE.UsbModeReg & BIT5) {
- resumeEhciPortTmp = SetEhciPllWr (USB3_EHCI_BUS_DEV_FUN << 16, pConfig);
- if (resumeEhciPortTmp > 0) resumeEhciPort = resumeEhciPortTmp;
- }
-
- RWPCI ((UINT32) (USB1_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32, ~BIT29, 0);
- RWPCI ((UINT32) (USB2_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32, ~BIT29, 0);
- RWPCI ((UINT32) (USB3_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32, ~BIT29, 0);
- RWPCI ((UINT32) (USB4_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32, ~BIT29, 0);
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF3, AccWidthUint8, 0, 0x20);
- SbStall (10);
- RWMEM (ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGF3, AccWidthUint8, 0, 0x00);
- RWPCI ((UINT32) (USB1_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32, ~BIT29, BIT29);
- RWPCI ((UINT32) (USB2_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32, ~BIT29, BIT29);
- RWPCI ((UINT32) (USB3_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32, ~BIT29, BIT29);
- RWPCI ((UINT32) (USB4_OHCI_BUS_DEV_FUN << 16) + SB_OHCI_REG50, AccWidthUint32, ~BIT29, BIT29);
-
- if (resumeEhciPort > 0) {
- RWMEM (resumeEhciPort, AccWidthUint8, ~BIT7, BIT7);
- SbStall (4000);
- RWMEM (resumeEhciPort, AccWidthUint8, ~BIT6, BIT6);
- }
-
- RWPCI ((UINT32) (USB1_EHCI_BUS_DEV_FUN << 16) + 0xC4, AccWidthUint8, 0xF0, 0x03);
- RWPCI ((UINT32) (USB2_EHCI_BUS_DEV_FUN << 16) + 0xC4, AccWidthUint8, 0xF0, 0x03);
- RWPCI ((UINT32) (USB3_EHCI_BUS_DEV_FUN << 16) + 0xC4, AccWidthUint8, 0xF0, 0x03);
-
-}
-
|