diff options
Diffstat (limited to 'src')
320 files changed, 12222 insertions, 10 deletions
diff --git a/src/Kconfig b/src/Kconfig new file mode 100644 index 0000000000..ca7fa61443 --- /dev/null +++ b/src/Kconfig @@ -0,0 +1,275 @@ +## +## This file is part of the coreboot repair project. +## +## Redistribution and use in source and binary forms, with or without +## modification, are permitted provided that the following conditions +## are met: +## 1. Redistributions of source code must retain the above copyright +## notice, this list of conditions and the following disclaimer. +## 2. Redistributions in binary form must reproduce the above copyright +## notice, this list of conditions and the following disclaimer in the +## documentation and/or other materials provided with the distribution. +## 3. The name of the author may not be used to endorse or promote products +## derived from this software without specific prior written permission. +## +## THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND +## ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +## IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +## ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE +## FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +## DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +## OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +## HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +## LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +## OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +## SUCH DAMAGE. +## + +mainmenu "Coreboot Configuration" + +source src/mainboard/Kconfig +source src/arch/i386/Kconfig +source src/arch/ppc/Kconfig +source src/devices/Kconfig +source src/northbridge/Kconfig +source src/southbridge/Kconfig +source src/superio/Kconfig +source src/cpu/Kconfig + +config CBFS + bool + default y + +config HAVE_HIGH_TABLES + bool + default y + +config PCI_BUS_SEGN_BITS + int + default 0 + +config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID + hex + default 0 + +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID + hex + default 0 + +config CPU_ADDR_BITS + int + default 36 + +config XIP_ROM_BASE + hex + default 0xfffe0000 + +config XIP_ROM_SIZE + hex + default 0x20000 + +config LB_CKS_RANGE_START + int + default 49 + +config LB_CKS_RANGE_END + int + default 125 + +config LB_CKS_LOC + int + default 126 + +config LOGICAL_CPUS + int + default 1 + +config PCI_ROM_RUN + int + default 0 + +config HT_CHAIN_UNITID_BASE + int + default 1 + +config HT_CHAIN_END_UNITID_BASE + int + default 32 + +config HEAP_SIZE + hex + default 0x2000 + +config COREBOOT_V2 + bool + default y + +config COREBOOT_V4 + bool + default y + +config DEBUG + bool + default n + +config USE_PRINTK_IN_CAR + bool + default n + +config USE_OPTION_TABLE + bool + default n + +config MAX_CPUS + int + default 1 + +config MMCONF_SUPPORT_DEFAULT + bool + default n + +config MMCONF_SUPPORT + bool + default n + +config LB_MEM_TOPK + int + default 2048 + +config MULTIBOOT + bool + default n + +config COMPRESSED_PAYLOAD_LZMA + bool + default y + +config COMPRESSED_PAYLOAD_NRV2B + bool + default n + +source src/console/Kconfig + +config HAVE_ACPI_RESUME + bool + default n + +config ACPI_SSDTX_NUM + int + default 0 + +config HAVE_ACPI_TABLES + bool + default n + +config HAVE_FALLBACK_BOOT + bool + default y + +config USE_FALLBACK_IMAGE + bool + default y + +config HAVE_HARD_RESET + bool + default n + +config HAVE_INIT_TIMER + bool + default n + +config HAVE_MAINBOARD_RESOURCES + bool + default n + +config HAVE_MOVNTI + bool + default y + +config HAVE_MP_TABLE + bool + default n + +config HAVE_OPTION_TABLE + bool + default y + +config HAVE_PIRQ_TABLE + bool + default n + +config PIRQ_ROUTE + bool + default n + +config HAVE_SMI_HANDLER + bool + default n + +config PCI_IO_CFG_EXT + bool + default n + +config IOAPIC + bool + default n + +menu "Drivers" + +endmenu + +menu "Payload" + +config COMPRESSED_PAYLOAD_LZMA + bool "Use LZMA compression for payloads" + default yes + +choice + prompt "Payload type" + default PAYLOAD_NONE + +config PAYLOAD_ELF + bool "An ELF executable payload file" + help + Select this option if you have a payload image (an ELF file) + which coreboot should run as soon as the basic hardware + initialization is completed. + + You will be able to specify the location and file name of the + payload image later. + +config PAYLOAD_NONE + bool "No payload" + help + Select this option if you want to create an "empty" coreboot + ROM image for a certain mainboard, i.e. a coreboot ROM image + which does not yet contain a payload. + + For such an image to be useful, you have to use the 'lar' tool + to add a payload to the ROM image later. + +endchoice + +config NORMAL_PAYLOAD_FILE + string "Normal payload path and filename" + depends on PAYLOAD_ELF + default "payload.elf" + help + The path and filename of the ELF executable file to use as normal payload. + +config FALLBACK_PAYLOAD_FILE + string "Fallback payload path and filename" + depends on PAYLOAD_ELF + default "payload.elf" + help + The path and filename of the ELF executable file to use as fallback payload. + +endmenu + +config GDB_STUB + bool "Enable GDB debugging support" + default y + help + If this is set, then you will be able to set breakpoints for gdb debugging. + See: src/arch/i386/lib/c_start.S + diff --git a/src/arch/i386/Kconfig b/src/arch/i386/Kconfig new file mode 100644 index 0000000000..ce36f55e92 --- /dev/null +++ b/src/arch/i386/Kconfig @@ -0,0 +1,59 @@ +config ARCH_X86 + boolean + help + This option is used to set the architecture of a mainboard. + It is usually set in mainboard/*/Kconfig. + +config ARCH + string + default i386 + depends on ARCH_X86 + help + This is the name of the respective subdirectory in arch/. + +config ROMBASE + hex + default 0xffe00000 if COREBOOT_ROMSIZE_KB_2048 + default 0xfff00000 if COREBOOT_ROMSIZE_KB_1024 + default 0xfff80000 if COREBOOT_ROMSIZE_KB_512 + default 0xfffc0000 if COREBOOT_ROMSIZE_KB_256 + default 0xfffe0000 if COREBOOT_ROMSIZE_KB_128 + +config PAYLOAD_SIZE + hex + default 0 + +config ROM_PAYLOAD_START + hex + default 0xffe00000 if COREBOOT_ROMSIZE_KB_2048 + default 0xfff00000 if COREBOOT_ROMSIZE_KB_1024 + default 0xfff80000 if COREBOOT_ROMSIZE_KB_512 + default 0xfffc0000 if COREBOOT_ROMSIZE_KB_256 + default 0xfffe0000 if COREBOOT_ROMSIZE_KB_128 + +config ROM_IMAGE_SIZE + hex + default 0x200000 if COREBOOT_ROMSIZE_KB_2048 + default 0x100000 if COREBOOT_ROMSIZE_KB_1024 + default 0x80000 if COREBOOT_ROMSIZE_KB_512 + default 0x40000 if COREBOOT_ROMSIZE_KB_256 + default 0x20000 if COREBOOT_ROMSIZE_KB_128 + +config RAMBASE + hex + default 0x100000 + +config STACK_SIZE + hex + default 0x8000 + + +menu "Misc Options" + +config MAX_REBOOT_CNT + int "Maximum Reboot Count" + default 3 + +endmenu + + diff --git a/src/arch/i386/Makefile.inc b/src/arch/i386/Makefile.inc new file mode 100644 index 0000000000..4195183f8d --- /dev/null +++ b/src/arch/i386/Makefile.inc @@ -0,0 +1,98 @@ +####################################################################### +# Take care of subdirectories +subdirs-y += boot +subdirs-y += init +subdirs-y += lib +subdirs-y += smp + +obj-y += ../../option_table.o + +ifdef POST_EVALUATION +####################################################################### +# Build the final rom image + +$(obj)/coreboot.rom: $(obj)/coreboot.bootblock $(obj)/coreboot_ram $(CBFSTOOL) + $(Q)rm -f $@ + $(Q)$(CBFSTOOL) $@ create $(shell expr 1024 \* $(CONFIG_COREBOOT_ROMSIZE_KB)) 131072 $(obj)/coreboot.bootblock + $(Q)$(CBFSTOOL) $@ add-stage $(obj)/coreboot_ram normal/coreboot_ram $(CBFS_COMPRESS_FLAG) + $(Q)if [ -f fallback/coreboot_apc ]; \ + then \ + $(CBFSTOOL) $@ add-stage fallback/coreboot_apc fallback/coreboot_apc $(CBFS_COMPRESS_FLAG); \ + fi + $(Q)$(CBFSTOOL) $@ add-stage $(obj)/coreboot_ram fallback/coreboot_ram $(CBFS_COMPRESS_FLAG) +ifeq ($(CONFIG_PAYLOAD_NONE),y) + $(Q)printf " PAYLOAD none (as specified by user)\n" +else + printf " PAYLOAD $(CONFIG_FALLBACK_PAYLOAD_FILE) $(COMPRESSFLAG)\n" + $(Q)$(CBFSTOOL) ./build/coreboot.rom add-payload $(CONFIG_FALLBACK_PAYLOAD_FILE) fallback/payload $(CBFS_COMPRESS_FLAG) + printf " PAYLOAD $(CONFIG_NORMAL_PAYLOAD_FILE) $(COMPRESSFLAG)\n" + $(Q)$(CBFSTOOL) ./build/coreboot.rom add-payload $(CONFIG_NORMAL_PAYLOAD_FILE) normal/payload $(CBFS_COMPRESS_FLAG) + $(CBFSTOOL) ./build/coreboot.rom print +endif + + +####################################################################### +# Build the bootblock + +BOOTBLOCK_SIZE=65536 + +$(obj)/coreboot.bootblock: $(obj)/coreboot.strip + $(Q)printf " CREATE $(subst $(obj)/,,$(@))\n" + $(Q)dd if=$< of=$(obj)/coreboot.bootblock.one obs=$(BOOTBLOCK_SIZE) conv=sync + $(Q)cat $(obj)/coreboot.bootblock.one $(obj)/coreboot.bootblock.one > $(obj)/coreboot.bootblock + +$(obj)/coreboot.strip: $(obj)/coreboot + $(Q)printf " OBJCOPY $(subst $(obj)/,,$(@))\n" + $(Q)$(OBJCOPY) -O binary $< $@ + +$(obj)/ldscript.ld: $(ldscripts) $(obj)/ldoptions + $(Q)printf 'INCLUDE "ldoptions"\n' > $@ + $(Q)printf '$(foreach ldscript,$(ldscripts),INCLUDE "$(ldscript)"\n)' >> $@ + +$(obj)/crt0_includes.h: $(crt0s) + $(Q)printf '$(foreach crt0,$(obj)/config.h $(crt0s),#include "$(crt0)"\n)' > $@ + +$(obj)/mainboard/$(MAINBOARDDIR)/crt0.o: $(obj)/mainboard/$(MAINBOARDDIR)/crt0.s + $(CC) -I$(obj) -Wa,-acdlns -c -o $@ $< > $(dir $@)/crt0.disasm + +$(obj)/mainboard/$(MAINBOARDDIR)/crt0.s: $(src)/arch/i386/init/crt0.S.lb $(obj)/crt0_includes.h + $(CC) -x assembler-with-cpp -DASSEMBLY -E -I$(src)/include -I$(src)/arch/i386/include -I$(obj) -include $(obj)/config.h -I. -I$(src) $< > $@.new && mv $@.new $@ + +$(obj)/coreboot: $(initobjs) $(obj)/ldscript.ld + $(Q)printf " LINK $(subst $(obj)/,,$(@))\n" + $(Q)$(CC) -nostdlib -nostartfiles -static -o $@ -L$(obj) -T $(obj)/ldscript.ld $(initobjs) + $(Q)$(NM) -n $(obj)/coreboot | sort > $(obj)/coreboot.map + +####################################################################### +# i386 specific tools + +$(obj)/option_table.h $(obj)/option_table.c: $(obj)/build_opt_tbl $(top)/src/mainboard/$(MAINBOARDDIR)/cmos.layout + $(Q)printf " OPTION $(subst $(obj)/,,$(@))\n" + $(Q)$(obj)/build_opt_tbl --config $(top)/src/mainboard/$(MAINBOARDDIR)/cmos.layout --header $(obj)/option_table.h --option $(obj)/option_table.c + +$(obj)/build_opt_tbl: $(top)/util/options/build_opt_tbl.c $(top)/src/include/pc80/mc146818rtc.h $(top)/src/include/boot/coreboot_tables.h + $(Q)printf " HOSTCC $(subst $(obj)/,,$(@))\n" + $(Q)$(HOSTCC) $(HOSTCFLAGS) -include $(obj)/config.h $< -o $@ + +####################################################################### +# Build the coreboot_ram (stage 2) + +$(obj)/coreboot_ram: $(obj)/coreboot_ram.o $(src)/config/coreboot_ram.ld #ldoptions + $(Q)printf " CC $(subst $(obj)/,,$(@))\n" + $(Q)$(CC) -nostdlib -nostartfiles -static -o $@ -L$(obj) -T $(src)/config/coreboot_ram.ld $(obj)/coreboot_ram.o + $(Q)$(NM) -n $(obj)/coreboot_ram | sort > $(obj)/coreboot_ram.map + +$(obj)/coreboot_ram.o: $(obj)/arch/i386/lib/c_start.o $(drivers) $(obj)/coreboot.a $(LIBGCC_FILE_NAME) + $(Q)printf " CC $(subst $(obj)/,,$(@))\n" + $(Q)$(CC) -nostdlib -r -o $@ $(obj)/arch/i386/lib/c_start.o $(drivers) -Wl,-\( $(obj)/coreboot.a $(LIBGCC_FILE_NAME) -Wl,-\) + +$(obj)/coreboot.a: $(objs) + $(Q)printf " AR $(subst $(obj)/,,$(@))\n" + $(Q)rm -f $(obj)/coreboot.a + $(Q)$(AR) cr $(obj)/coreboot.a $(objs) + + +####################################################################### +# done + +endif diff --git a/src/arch/i386/boot/Makefile.inc b/src/arch/i386/boot/Makefile.inc new file mode 100644 index 0000000000..40bb3b8e13 --- /dev/null +++ b/src/arch/i386/boot/Makefile.inc @@ -0,0 +1,10 @@ + +obj-y += boot.o +obj-y += coreboot_table.o +obj-$(CONFIG_MULTIBOOT) += multiboot.o +obj-y += tables.o +obj-$(CONFIG_HAVE_PIRQ_TABLE) += pirq_routing.o +obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi.o +obj-$(CONFIG_HAVE_ACPI_TABLES) += acpigen.o +obj-$(CONFIG_HAVE_ACPI_RESUME) += wakeup.S + diff --git a/src/arch/i386/init/Makefile.inc b/src/arch/i386/init/Makefile.inc new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/arch/i386/init/Makefile.inc @@ -0,0 +1 @@ +# diff --git a/src/arch/i386/lib/Makefile.inc b/src/arch/i386/lib/Makefile.inc new file mode 100644 index 0000000000..a1cf617fb2 --- /dev/null +++ b/src/arch/i386/lib/Makefile.inc @@ -0,0 +1,15 @@ +obj-y += c_start.o +obj-y += cpu.o +obj-y += pci_ops_conf1.o +obj-y += pci_ops_conf2.o +obj-y += pci_ops_mmconf.o +obj-y += pci_ops_auto.o +obj-y += exception.o + +initobj-y += printk_init.o +initobj-y += cbfs_and_run.o + +ifdef POST_EVALUATION +$(obj)/arch/i386/lib/console.o :: $(obj)/build.h +endif + diff --git a/src/arch/i386/smp/Makefile.inc b/src/arch/i386/smp/Makefile.inc new file mode 100644 index 0000000000..119dd6d40e --- /dev/null +++ b/src/arch/i386/smp/Makefile.inc @@ -0,0 +1,5 @@ +obj-$(CONFIG_HAVE_MP_TABLE) += mpspec.o +# what about this: how awkward. +#object ioapic.o CONFIG_IOAPIC + + diff --git a/src/arch/ppc/Kconfig b/src/arch/ppc/Kconfig new file mode 100644 index 0000000000..23de36c0e8 --- /dev/null +++ b/src/arch/ppc/Kconfig @@ -0,0 +1,13 @@ +config ARCH_POWERPC + boolean + help + This option is used to set the architecture of a mainboard. + It is usually set in mainboard/*/Kconfig. + +config ARCH + string + default ppc + depends on ARCH_POWERPC + help + This is the name of the respective subdirectory in arch/. + diff --git a/src/boot/Makefile.inc b/src/boot/Makefile.inc new file mode 100644 index 0000000000..01542b3eb6 --- /dev/null +++ b/src/boot/Makefile.inc @@ -0,0 +1,2 @@ +obj-y += hardwaremain.o +obj-y += selfboot.o diff --git a/src/console/Kconfig b/src/console/Kconfig new file mode 100644 index 0000000000..386f8391fe --- /dev/null +++ b/src/console/Kconfig @@ -0,0 +1,40 @@ +menu "Console Options" + +config SERIAL_CONSOLE + bool "See output on the serial port console" + default y + +config TTYS0_BASE + hex "I/O base for the serial port (default 0x3f8)" + depends on SERIAL_CONSOLE + default 0x3f8 + +config SERIAL_SET_SPEED + bool "Override the serial console baud rate" + default y + depends on SERIAL_CONSOLE + +config TTYS0_BAUD + int "Serial console baud rate (default 115200)" + depends on SERIAL_SET_SPEED + default 115200 + +config USBDEBUG_DIRECT + bool "Support a USB debug dongle. Not supported on all chipsets. FIX DEPENDENCY HERE" + default n + +config CONSOLE_VGA + bool + default n + +config MAXIMUM_CONSOLE_LOGLEVEL + int + default 9 + +config DEFAULT_CONSOLE_LOGLEVEL + int + default 9 + +endmenu + + diff --git a/src/console/Makefile.inc b/src/console/Makefile.inc new file mode 100644 index 0000000000..242c93e0d4 --- /dev/null +++ b/src/console/Makefile.inc @@ -0,0 +1,12 @@ +obj-y += printk.o +obj-y += console.o +obj-y += vtxprintf.o +obj-y += vsprintf.o +initobj-y += vtxprintf.o +initobj-y += vsprintf.o +driver-$(CONFIG_SERIAL_CONSOLE) += uart8250_console.o +driver-$(CONFIG_USBDEBUG_DIRECT) += usbdebug_direct_console.o +driver-$(CONFIG_CONSOLE_VGA) += vga_console.o +driver-$(CONFIG_CONSOLE_BTEXT) += btext_console.o +driver-$(CONFIG_CONSOLE_BTEXT) += font-8x16.o +driver-$(CONFIG_CONSOLE_LOGBUF) += logbuf_console.o diff --git a/src/console/console.c b/src/console/console.c index 78823afdb5..008130fb63 100644 --- a/src/console/console.c +++ b/src/console/console.c @@ -8,8 +8,6 @@ #include <pc80/mc146818rtc.h> -static int initialized; - /* initialize the console */ void console_init(void) { @@ -22,7 +20,6 @@ void console_init(void) continue; driver->init(); } - initialized = 1; } static void __console_tx_byte(unsigned char byte) @@ -45,8 +42,6 @@ void console_tx_flush(void) void console_tx_byte(unsigned char byte) { - if (!initialized) - return; if (byte == '\n') __console_tx_byte('\r'); __console_tx_byte(byte); @@ -55,8 +50,6 @@ void console_tx_byte(unsigned char byte) unsigned char console_rx_byte(void) { struct console_driver *driver; - if (!initialized) - return 0; for(driver = console_drivers; driver < econsole_drivers; driver++) { if (driver->tst_byte) break; @@ -70,8 +63,6 @@ unsigned char console_rx_byte(void) int console_tst_byte(void) { struct console_driver *driver; - if (!initialized) - return 0; for(driver = console_drivers; driver < econsole_drivers; driver++) if (driver->tst_byte) return driver->tst_byte(); diff --git a/src/cpu/Kconfig b/src/cpu/Kconfig new file mode 100644 index 0000000000..de2ceea557 --- /dev/null +++ b/src/cpu/Kconfig @@ -0,0 +1,18 @@ +#source src/cpu/amd/Kconfig +source src/cpu/emulation/Kconfig +source src/cpu/intel/Kconfig +source src/cpu/via/Kconfig +source src/cpu/x86/Kconfig +source src/cpu/ppc/Kconfig + +config DCACHE_RAM_BASE + hex + default 0xffdf8000 if CPU_INTEL_CORE + +config DCACHE_RAM_SIZE + hex + default 0x8000 if CPU_INTEL_CORE + +config SMP + bool + default n diff --git a/src/cpu/Makefile.inc b/src/cpu/Makefile.inc new file mode 100644 index 0000000000..aa4435f029 --- /dev/null +++ b/src/cpu/Makefile.inc @@ -0,0 +1,8 @@ +#input amd +subdirs-y += intel +subdirs-y += via +subdirs-y += emulation +#input ppc +#input simple_init +#input via +#input x86 diff --git a/src/cpu/amd/Kconfig b/src/cpu/amd/Kconfig new file mode 100644 index 0000000000..fdf52fbd60 --- /dev/null +++ b/src/cpu/amd/Kconfig @@ -0,0 +1,8 @@ +source src/cpu/amd/socket_754/Kconfig +source src/cpu/amd/socket_939/Kconfig +source src/cpu/amd/socket_940/Kconfig +source src/cpu/amd/socket_AM2/Kconfig +source src/cpu/amd/socket_AM2r2/Kconfig +source src/cpu/amd/socket_F/Kconfig +source src/cpu/amd/socket_F_1207/Kconfig +source src/cpu/amd/socket_S1G1/Kconfig diff --git a/src/cpu/amd/socket_F/Kconfig b/src/cpu/amd/socket_F/Kconfig new file mode 100644 index 0000000000..b63b596321 --- /dev/null +++ b/src/cpu/amd/socket_F/Kconfig @@ -0,0 +1,3 @@ +config CPU_AMD_SOCKET_F + bool + default false diff --git a/src/cpu/emulation/Kconfig b/src/cpu/emulation/Kconfig new file mode 100644 index 0000000000..25d55e689b --- /dev/null +++ b/src/cpu/emulation/Kconfig @@ -0,0 +1,2 @@ +source src/cpu/emulation/qemu-x86/Kconfig + diff --git a/src/cpu/emulation/Makefile.inc b/src/cpu/emulation/Makefile.inc new file mode 100644 index 0000000000..ac166afb09 --- /dev/null +++ b/src/cpu/emulation/Makefile.inc @@ -0,0 +1 @@ +subdirs-y += qemu-x86 diff --git a/src/cpu/emulation/qemu-x86/Kconfig b/src/cpu/emulation/qemu-x86/Kconfig new file mode 100644 index 0000000000..15b3538f25 --- /dev/null +++ b/src/cpu/emulation/qemu-x86/Kconfig @@ -0,0 +1,4 @@ +config CPU_EMULATION_QEMU_X86 + bool + default false + diff --git a/src/cpu/emulation/qemu-x86/Makefile.inc b/src/cpu/emulation/qemu-x86/Makefile.inc new file mode 100644 index 0000000000..840af27d35 --- /dev/null +++ b/src/cpu/emulation/qemu-x86/Makefile.inc @@ -0,0 +1 @@ +obj-$(CONFIG_CPU_EMULATION_QEMU_X86) += northbridge.o diff --git a/src/cpu/intel/Kconfig b/src/cpu/intel/Kconfig new file mode 100644 index 0000000000..87623a3843 --- /dev/null +++ b/src/cpu/intel/Kconfig @@ -0,0 +1,4 @@ +source src/cpu/intel/model_6ex/Kconfig +source src/cpu/intel/model_6fx/Kconfig +source src/cpu/intel/socket_mFCPGA478/Kconfig +source src/cpu/intel/socket_PGA370/Kconfig
\ No newline at end of file diff --git a/src/cpu/intel/Makefile.inc b/src/cpu/intel/Makefile.inc new file mode 100644 index 0000000000..afe5cd3c79 --- /dev/null +++ b/src/cpu/intel/Makefile.inc @@ -0,0 +1,14 @@ +# Note: from here on down, we are socket-centric. Socket choice determines what other cpu files are included. +# Therefore: +# ONLY include Makefile.inc from socket directories! + +subdirs-y += speedstep +subdirs-y += socket_mFCPGA478 +subdirs-y += socket_PGA370 + +#socket_mPGA478 +#socket_mPGA479M +#socket_mPGA603 +#socket_mPGA604 +#socket_mPGA604_533Mhz +#socket_mPGA604_800Mhz diff --git a/src/cpu/intel/hyperthreading/Makefile.inc b/src/cpu/intel/hyperthreading/Makefile.inc new file mode 100644 index 0000000000..34cf8eee99 --- /dev/null +++ b/src/cpu/intel/hyperthreading/Makefile.inc @@ -0,0 +1 @@ +obj-y += intel_sibling.o diff --git a/src/cpu/intel/microcode/Makefile.inc b/src/cpu/intel/microcode/Makefile.inc new file mode 100644 index 0000000000..26513df8f7 --- /dev/null +++ b/src/cpu/intel/microcode/Makefile.inc @@ -0,0 +1 @@ +obj-y += microcode.o diff --git a/src/cpu/intel/model_69x/Makefile.inc b/src/cpu/intel/model_69x/Makefile.inc new file mode 100644 index 0000000000..4756e33787 --- /dev/null +++ b/src/cpu/intel/model_69x/Makefile.inc @@ -0,0 +1 @@ +driver-y += model_69x_init.o diff --git a/src/cpu/intel/model_6dx/Makefile.inc b/src/cpu/intel/model_6dx/Makefile.inc new file mode 100644 index 0000000000..bbadb50170 --- /dev/null +++ b/src/cpu/intel/model_6dx/Makefile.inc @@ -0,0 +1 @@ +driver-y += model_6dx_init.o diff --git a/src/cpu/intel/model_6ex/Kconfig b/src/cpu/intel/model_6ex/Kconfig new file mode 100644 index 0000000000..7d5e7692ef --- /dev/null +++ b/src/cpu/intel/model_6ex/Kconfig @@ -0,0 +1,4 @@ +config CPU_INTEL_CORE + bool + default n + select SMP diff --git a/src/cpu/intel/model_6ex/Makefile.inc b/src/cpu/intel/model_6ex/Makefile.inc new file mode 100644 index 0000000000..e4676ea0bf --- /dev/null +++ b/src/cpu/intel/model_6ex/Makefile.inc @@ -0,0 +1 @@ +driver-y += model_6ex_init.o diff --git a/src/cpu/intel/model_6fx/Kconfig b/src/cpu/intel/model_6fx/Kconfig new file mode 100644 index 0000000000..484114cf03 --- /dev/null +++ b/src/cpu/intel/model_6fx/Kconfig @@ -0,0 +1 @@ +# select HAVE_MOVNTI diff --git a/src/cpu/intel/model_6fx/Makefile.inc b/src/cpu/intel/model_6fx/Makefile.inc new file mode 100644 index 0000000000..4db78019cb --- /dev/null +++ b/src/cpu/intel/model_6fx/Makefile.inc @@ -0,0 +1 @@ +driver-y += model_6fx_init.o diff --git a/src/cpu/intel/model_6xx/Makefile.inc b/src/cpu/intel/model_6xx/Makefile.inc new file mode 100644 index 0000000000..a5956295d0 --- /dev/null +++ b/src/cpu/intel/model_6xx/Makefile.inc @@ -0,0 +1,22 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Ron Minnich <rminnich@gmail.com> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +obj-y += model_6xx_init.o + diff --git a/src/cpu/intel/socket_PGA370/Kconfig b/src/cpu/intel/socket_PGA370/Kconfig new file mode 100644 index 0000000000..d7098b060b --- /dev/null +++ b/src/cpu/intel/socket_PGA370/Kconfig @@ -0,0 +1,23 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +config CPU_INTEL_SOCKET_PGA370 + bool + default false diff --git a/src/cpu/intel/socket_PGA370/Makefile.inc b/src/cpu/intel/socket_PGA370/Makefile.inc new file mode 100644 index 0000000000..46a851a3d5 --- /dev/null +++ b/src/cpu/intel/socket_PGA370/Makefile.inc @@ -0,0 +1,34 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +ifeq ($(CONFIG_CPU_INTEL_SOCKET_PGA370),y) + obj-y += socket_PGA370.o + subdirs-y += ../model_6xx + subdirs-y += ../../x86/tsc + subdirs-y += ../../x86/mtrr + subdirs-y += ../../x86/fpu + subdirs-y += ../../x86/mmx + subdirs-y += ../../x86/sse + subdirs-y += ../../x86/lapic + subdirs-y += ../../x86/cache + subdirs-y += ../../x86/smm + subdirs-y += ../microcode +endif + diff --git a/src/cpu/intel/socket_mFCPGA478/Kconfig b/src/cpu/intel/socket_mFCPGA478/Kconfig new file mode 100644 index 0000000000..0f01535ecd --- /dev/null +++ b/src/cpu/intel/socket_mFCPGA478/Kconfig @@ -0,0 +1,3 @@ +config CPU_INTEL_SOCKET_MFCPGA478 + bool + default false diff --git a/src/cpu/intel/socket_mFCPGA478/Makefile.inc b/src/cpu/intel/socket_mFCPGA478/Makefile.inc new file mode 100644 index 0000000000..808dd4ffd1 --- /dev/null +++ b/src/cpu/intel/socket_mFCPGA478/Makefile.inc @@ -0,0 +1,17 @@ +ifeq ($(CONFIG_CPU_INTEL_SOCKET_MFCPGA478),y) + obj-y += socket_mFCPGA478.o + subdirs-y += ../model_69x + subdirs-y += ../model_6dx + subdirs-y += ../model_6ex + subdirs-y += ../model_6fx + subdirs-y += ../../x86/tsc + subdirs-y += ../../x86/mtrr + subdirs-y += ../../x86/fpu + subdirs-y += ../../x86/mmx + subdirs-y += ../../x86/sse + subdirs-y += ../../x86/lapic + subdirs-y += ../../x86/cache + subdirs-y += ../../x86/smm + subdirs-y += ../microcode + subdirs-y += ../hyperthreading +endif diff --git a/src/cpu/intel/speedstep/Makefile.inc b/src/cpu/intel/speedstep/Makefile.inc new file mode 100644 index 0000000000..4351d68c21 --- /dev/null +++ b/src/cpu/intel/speedstep/Makefile.inc @@ -0,0 +1,5 @@ +ifeq ($(CONFIG_HAVE_ACPI_TABLES), y) +ifeq ($(CONFIG_CPU_INTEL_SOCKET_MFCPGA478), y) + obj-y += acpi.o +endif +endif diff --git a/src/cpu/ppc/Kconfig b/src/cpu/ppc/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/cpu/ppc/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/cpu/ppc/Makefile.inc b/src/cpu/ppc/Makefile.inc new file mode 100644 index 0000000000..a9cd587ebc --- /dev/null +++ b/src/cpu/ppc/Makefile.inc @@ -0,0 +1,6 @@ +#subdirs-y += ../simple_init +#subdirs-y += mpc74xx +#subdirs-y += ppc4xx +#subdirs-y += ppc7xx +#subdirs-y += ppc970 + diff --git a/src/cpu/simple_init/Makefile.inc b/src/cpu/simple_init/Makefile.inc new file mode 100644 index 0000000000..486135947e --- /dev/null +++ b/src/cpu/simple_init/Makefile.inc @@ -0,0 +1 @@ +obj-y += simple_cpu_init.o diff --git a/src/cpu/via/Kconfig b/src/cpu/via/Kconfig new file mode 100644 index 0000000000..6927f6d0e1 --- /dev/null +++ b/src/cpu/via/Kconfig @@ -0,0 +1 @@ +source src/cpu/via/model_c7/Kconfig diff --git a/src/cpu/via/Makefile.inc b/src/cpu/via/Makefile.inc new file mode 100644 index 0000000000..6d62f22619 --- /dev/null +++ b/src/cpu/via/Makefile.inc @@ -0,0 +1,2 @@ +#subdirs-y += model_c7 +subdirs-y += model_c7 diff --git a/src/cpu/via/model_c7/Kconfig b/src/cpu/via/model_c7/Kconfig new file mode 100644 index 0000000000..e7e2cd4c5c --- /dev/null +++ b/src/cpu/via/model_c7/Kconfig @@ -0,0 +1,3 @@ +config CPU_VIA_C7 + bool + default n diff --git a/src/cpu/via/model_c7/Makefile.inc b/src/cpu/via/model_c7/Makefile.inc new file mode 100644 index 0000000000..8e645eb0a2 --- /dev/null +++ b/src/cpu/via/model_c7/Makefile.inc @@ -0,0 +1,13 @@ +ifeq ($(CONFIG_CPU_VIA_C7),y) + subdirs-y += ../../x86/tsc + subdirs-y += ../../x86/mtrr + subdirs-y += ../../x86/fpu + subdirs-y += ../../x86/mmx + subdirs-y += ../../x86/sse + subdirs-y += ../../x86/lapic + subdirs-y += ../../x86/cache + subdirs-y += ../../x86/smm + subdirs-y += ../../intel/microcode +endif + +obj-y += model_c7_init.o diff --git a/src/cpu/x86/Kconfig b/src/cpu/x86/Kconfig new file mode 100644 index 0000000000..b036baf1f5 --- /dev/null +++ b/src/cpu/x86/Kconfig @@ -0,0 +1,11 @@ +config SERIAL_CPU_INIT + bool + default y + +config XIP_ROM_BASE + hex + default 0xfffe0000 + +config XIP_ROM_BASE + hex + default 0x2000 diff --git a/src/cpu/x86/cache/Makefile.inc b/src/cpu/x86/cache/Makefile.inc new file mode 100644 index 0000000000..75679e586b --- /dev/null +++ b/src/cpu/x86/cache/Makefile.inc @@ -0,0 +1 @@ +obj-y += cache.o diff --git a/src/cpu/x86/fpu/Makefile.inc b/src/cpu/x86/fpu/Makefile.inc new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/cpu/x86/fpu/Makefile.inc @@ -0,0 +1 @@ +# diff --git a/src/cpu/x86/lapic/Makefile.inc b/src/cpu/x86/lapic/Makefile.inc new file mode 100644 index 0000000000..128deb2834 --- /dev/null +++ b/src/cpu/x86/lapic/Makefile.inc @@ -0,0 +1,4 @@ +obj-y += lapic.o +obj-y += lapic_cpu_init.o +obj-y += secondary.o + diff --git a/src/cpu/x86/mmx/Makefile.inc b/src/cpu/x86/mmx/Makefile.inc new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/cpu/x86/mmx/Makefile.inc @@ -0,0 +1 @@ +# diff --git a/src/cpu/x86/mtrr/Makefile.inc b/src/cpu/x86/mtrr/Makefile.inc new file mode 100644 index 0000000000..b68873e5a6 --- /dev/null +++ b/src/cpu/x86/mtrr/Makefile.inc @@ -0,0 +1 @@ +obj-y += mtrr.o diff --git a/src/cpu/x86/smm/Makefile.inc b/src/cpu/x86/smm/Makefile.inc new file mode 100644 index 0000000000..6a566017ea --- /dev/null +++ b/src/cpu/x86/smm/Makefile.inc @@ -0,0 +1,45 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +##if CONFIG_HAVE_SMI_HANDLER +## object smmrelocate.S +## +## smmobject smmhandler.S +## smmobject smihandler.o +## +## makerule smm.o +## depends "$(SMM-OBJECTS) $(TOP)/src/console/printk.o $(TOP)/src/console/vtxprintf.o $(LIBGCC_FILE_NAME)" +## action "$(CC) $(DISTRO_LFLAGS) -nostdlib -r -o $@ $^" +## end +## +## makerule smm +## depends "smm.o $(TOP)/src/cpu/x86/smm/smm.ld ldoptions" +## action "$(CC) $(DISTRO_LFLAGS) -nostdlib -nostartfiles -static -o smm.elf -T $(TOP)/src/cpu/x86/smm/smm.ld smm.o" +## action "$(CONFIG_CROSS_COMPILE)nm -n smm.elf | sort > smm.map" +## action "$(OBJCOPY) -O binary smm.elf smm" +## end +## +## makerule smm_bin.c +## depends "smm" +## action "(echo 'unsigned char smm[] = {'; od -vtx1 smm | sed -e 's,^[0-9]* *,,' -e 's:[0-9a-f][0-9a-f] :0x&,:g' -e 's:[0-9a-f][0-9a-f]$$:0x&,:'; echo '}; unsigned int smm_len = '; wc -c smm |awk '{print $$1;}' ; echo ';') > smm_bin.c" +## end +## +## object ./smm_bin.o +##end diff --git a/src/cpu/x86/sse/Makefile.inc b/src/cpu/x86/sse/Makefile.inc new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/cpu/x86/sse/Makefile.inc @@ -0,0 +1 @@ +# diff --git a/src/cpu/x86/tsc/Makefile.inc b/src/cpu/x86/tsc/Makefile.inc new file mode 100644 index 0000000000..93bd13720e --- /dev/null +++ b/src/cpu/x86/tsc/Makefile.inc @@ -0,0 +1,7 @@ +obj-y += delay_tsc.o + +# default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=0 +# if CONFIG_UDELAY_TSC +# default CONFIG_HAVE_INIT_TIMER=1 +# object delay_tsc.o +# end diff --git a/src/devices/Kconfig b/src/devices/Kconfig new file mode 100644 index 0000000000..6f78cc6324 --- /dev/null +++ b/src/devices/Kconfig @@ -0,0 +1,53 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 coresystems GmbH +## (Written by Stefan Reinauer <stepan@coresystems.de> for coresystems GmbH) +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +menu "Devices" + +config VGA_ROM_RUN + bool + help + Execute PCI/AGP option ROMs if available. This is required to + enable PCI/AGP VGA plugin cards. + +choice + prompt "Execute PCI Option ROMs" + default PCI_OPTION_ROM_RUN_REALMODE + help + Execute PCI/AGP option ROMs if available. You can choose to + execute PCI option ROMs natively (32bit x86 system required), + in an emulator (x86emu), or ignore option ROM execution. + + config PCI_OPTION_ROM_RUN_REALMODE + prompt "Run VGA ROMs" + bool + select VGA_ROM_RUN + help + Execute PCI/AGP option ROMs if available. This is required to + enable PCI/AGP VGA plugin cards. + + config NO_RUN + prompt "DO NOT Run VGA ROMs" + bool + help + Execute PCI/AGP option ROMs if available. This is required to + enable PCI/AGP VGA plugin cards. + +endchoice +endmenu diff --git a/src/devices/Makefile.inc b/src/devices/Makefile.inc new file mode 100644 index 0000000000..9ef4e69517 --- /dev/null +++ b/src/devices/Makefile.inc @@ -0,0 +1,21 @@ +obj-y += device.o +obj-y += root_device.o +obj-y += device_util.o +obj-y += pci_device.o +obj-y += hypertransport.o +obj-y += pcix_device.o +obj-y += pciexp_device.o +obj-y += agp_device.o +obj-y += cardbus_device.o +obj-y += pnp_device.o +obj-y += pci_ops.o +obj-y += smbus_ops.o + +ifeq ($(CONFIG_PCI_ROM_RUN),y) +obj-$(CONFIG_PCI_ROM_RUN) += pci_rom.o +subdirs-$(CONFIG_PCI_ROM_RUN) += ../../util/x86emu +else +obj-$(CONFIG_VGA_ROM_RUN) += pci_rom.o +subdirs-$(CONFIG_VGA_ROM_RUN) += ../../util/x86emu +endif + diff --git a/src/drivers/Makefile.inc b/src/drivers/Makefile.inc new file mode 100644 index 0000000000..061728ae24 --- /dev/null +++ b/src/drivers/Makefile.inc @@ -0,0 +1 @@ +subdirs-y += pci diff --git a/src/drivers/pci/Makefile.inc b/src/drivers/pci/Makefile.inc new file mode 100644 index 0000000000..09ac260c9c --- /dev/null +++ b/src/drivers/pci/Makefile.inc @@ -0,0 +1 @@ +subdirs-y += onboard diff --git a/src/drivers/pci/onboard/Makefile.inc b/src/drivers/pci/onboard/Makefile.inc new file mode 100644 index 0000000000..5a16314cce --- /dev/null +++ b/src/drivers/pci/onboard/Makefile.inc @@ -0,0 +1 @@ +obj-y += onboard.o diff --git a/src/lib/Makefile.inc b/src/lib/Makefile.inc new file mode 100644 index 0000000000..1d76aac09b --- /dev/null +++ b/src/lib/Makefile.inc @@ -0,0 +1,29 @@ +obj-y += clog2.o +obj-y += uart8250.o +obj-y += memset.o +obj-y += memcpy.o +obj-y += memcmp.o +obj-y += memmove.o +obj-y += malloc.o +obj-y += delay.o +obj-y += fallback_boot.o +obj-y += compute_ip_checksum.o +obj-y += version.o +obj-y += cbfs.o +obj-y += lzma.o +#obj-y += lzmadecode.o + +initobj-y += uart8250.o +initobj-y += memset.o +initobj-y += memcpy.o +initobj-y += memcmp.o +initobj-y += cbfs.o +initobj-y += lzma.o +#initobj-y += lzmadecode.o + +obj-$(CONFIG_USBDEBUG_DIRECT) += usbdebug_direct.o +obj-$(CONFIG_COMPRESSED_PAYLOAD_LZMA) += lzma.o + +ifdef POST_EVALUATION +$(obj)/lib/version.o :: $(obj)/build.h +endif diff --git a/src/mainboard/Kconfig b/src/mainboard/Kconfig new file mode 100644 index 0000000000..14b1d5d7a9 --- /dev/null +++ b/src/mainboard/Kconfig @@ -0,0 +1,343 @@ + +menu "Mainboard" + +choice + prompt "Mainboard vendor" + default VENDOR_EMULATION + +config VENDOR_ATREND + bool "A-Trend" + help + Select this option for systems from the vendor. + +config VENDOR_ABIT + bool "ABIT" + help + Select this option for systems from the vendor. + +config VENDOR_ADVANTECH + bool "Advantech" + help + Select this option for systems from the vendor. + +config VENDOR_AGAMI + bool "Agami" + help + Select this option for systems from the vendor. + +config VENDOR_AMD + bool "AMD" + help + Select this option for systems from the vendor. + +config VENDOR_ARIMA + bool "Arima" + help + Select this option for systems from the vendor. + +config VENDOR_ARTEC + bool "Artec Group" + help + Select this option for systems from the vendor. + +config VENDOR_ASI + bool "ASI" + help + Select this option for systems from the vendor. + +config VENDOR_ASUS + bool "ASUS" + help + Select this option for systems from the vendor. + +config VENDOR_AXUS + bool "AXUS" + help + Select this option for systems from the vendor. + +config VENDOR_AZZA + bool "Azza" + help + Select this option for systems from the vendor. + +config VENDOR_BCOM + bool "BCOM" + help + Select this option for systems from the vendor. + +config VENDOR_BIOSTAR + bool "Biostar" + help + Select this option for systems from the vendor. + +config VENDOR_BROADCOM + bool "Broadcom" + help + Select this option for systems from the vendor. + +config VENDOR_COMPAQ + bool "Compaq" + help + Select this option for systems from the vendor. + +config VENDOR_DELL + bool "DELL" + help + Select this option for systems from the vendor. + +config VENDOR_DIGITALLOGIC + bool "Digital Logic" + help + Select this option for systems from the vendor. + +config VENDOR_EAGLELION + bool "Eagle Lion" + help + Select this option for systems from the vendor. + +config VENDOR_EMBEDDEDPLANET + bool "Embedded Planet" + help + Select this option for systems from the vendor. + +config VENDOR_EMULATION + bool "Emulation" + help + Select this option for various system emulators, such as QEMU. + +config VENDOR_GIGABYTE + bool "Gigabyte" + help + Select this option for systems from the vendor. + +config VENDOR_HP + bool "HP" + help + Select this option for systems from the vendor. + +config VENDOR_IBM + bool "IBM" + help + Select this option for systems from the vendor. + +config VENDOR_IEI + bool "IEI" + help + Select this option for systems from the vendor. + +config VENDOR_INTEL + bool "Intel" + help + Select this option for systems from the vendor. + +config VENDOR_IWILL + bool "Iwill" + help + Select this option for systems from the vendor. + +config VENDOR_JETWAY + bool "Jetway" + help + Select this option for systems from the vendor. + +config VENDOR_KONTRON + bool "Kontron" + help + Select this option for systems from the vendor. + +config VENDOR_LIPPERT + bool "Lippert" + help + Select this option for systems from the vendor. + +config VENDOR_MOTOROLA + bool "Motorola" + help + Select this option for systems from the vendor. + +config VENDOR_MSI + bool "MSI" + help + Select this option for systems from the vendor. + +config VENDOR_NEC + bool "NEC" + help + Select this option for systems from the vendor. + +config VENDOR_NEWISYS + bool "Newisys" + help + Select this option for systems from the vendor. + +config VENDOR_NVIDIA + bool "NVidia" + help + Select this option for systems from the vendor. + +config VENDOR_OLPC + bool "OLPC" + help + Select this option for systems from the vendor. + +config VENDOR_PCENGINES + bool "PC Engines" + help + Select this option for systems from the vendor. + +config VENDOR_RCA + bool "RCA" + help + Select this option for systems from the vendor. + +config VENDOR_SUNW + bool "SUN Microsystems" + help + Select this option for systems from the vendor. + +config VENDOR_SUPERMICRO + bool "Supermicro" + help + Select this option for systems from the vendor. + +config VENDOR_TECHNEXION + bool "Technexion" + help + Select this option for systems from the vendor. + +config VENDOR_THOMSON + bool "Thomson" + help + Select this option for systems from the vendor. + +config VENDOR_TOTALIMPACT + bool "Total Impact" + help + Select this option for systems from the vendor. + +config VENDOR_TYAN + bool "Tyan" + help + Select this option for systems from the vendor. + +config VENDOR_VIA + bool "VIA" + help + Select this option for systems from the vendor. + +endchoice + +config MAINBOARD_VENDOR + string + default "EMULATION" + depends on VENDOR_EMULATION + +config MAINBOARD_VENDOR + string + default "KONTRON" + depends on VENDOR_KONTRON + +config MAINBOARD_VENDOR + string + default "VIA" + depends on VENDOR_VIA + +config MAINBOARD_VENDOR + string + default "AMD" + depends on VENDOR_AMD + +config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID + hex + default 0x1019 + depends on VENDOR_VIA + +source "src/mainboard/a-trend/Kconfig" +source "src/mainboard/abit/Kconfig" +source "src/mainboard/advantech/Kconfig" +source "src/mainboard/amd/Kconfig" +source "src/mainboard/arima/Kconfig" +source "src/mainboard/artecgroup/Kconfig" +source "src/mainboard/asi/Kconfig" +source "src/mainboard/asus/Kconfig" +source "src/mainboard/axus/Kconfig" +source "src/mainboard/azza/Kconfig" +source "src/mainboard/bcom/Kconfig" +source "src/mainboard/biostar/Kconfig" +source "src/mainboard/broadcom/Kconfig" +source "src/mainboard/compaq/Kconfig" +source "src/mainboard/dell/Kconfig" +source "src/mainboard/digitallogic/Kconfig" +source "src/mainboard/eaglelion/Kconfig" +source "src/mainboard/embeddedplanet/Kconfig" +source "src/mainboard/emulation/Kconfig" +source "src/mainboard/gigabyte/Kconfig" +source "src/mainboard/hp/Kconfig" +source "src/mainboard/ibm/Kconfig" +source "src/mainboard/iei/Kconfig" +source "src/mainboard/intel/Kconfig" +source "src/mainboard/iwill/Kconfig" +source "src/mainboard/jetway/Kconfig" +source "src/mainboard/kontron/Kconfig" +source "src/mainboard/lippert/Kconfig" +source "src/mainboard/motorola/Kconfig" +source "src/mainboard/msi/Kconfig" +source "src/mainboard/nec/Kconfig" +source "src/mainboard/newisys/Kconfig" +source "src/mainboard/nvidia/Kconfig" +source "src/mainboard/olpc/Kconfig" +source "src/mainboard/pcengines/Kconfig" +source "src/mainboard/rca/Kconfig" +source "src/mainboard/sunw/Kconfig" +source "src/mainboard/supermicro/Kconfig" +source "src/mainboard/technexion/Kconfig" +source "src/mainboard/technologic/Kconfig" +source "src/mainboard/televideo/Kconfig" +source "src/mainboard/thomson/Kconfig" +source "src/mainboard/totalimpact/Kconfig" +source "src/mainboard/tyan/Kconfig" +source "src/mainboard/via/Kconfig" + +choice + prompt "ROM chip size" + default COREBOOT_ROMSIZE_KB_256 + +config COREBOOT_ROMSIZE_KB_128 + bool "128 KB" + help + Choose this option if you have a 128 KB ROM chip. + +config COREBOOT_ROMSIZE_KB_256 + bool "256 KB" + help + Choose this option if you have a 256 KB ROM chip. + +config COREBOOT_ROMSIZE_KB_512 + bool "512 KB" + help + Choose this option if you have a 512 KB ROM chip. + +config COREBOOT_ROMSIZE_KB_1024 + bool "1024 KB (1 MB)" + help + Choose this option if you have a 1024 KB (1 MB) ROM chip. + +config COREBOOT_ROMSIZE_KB_2048 + bool "2048 KB (2 MB)" + help + Choose this option if you have a 2048 KB (2 MB) ROM chip. + +endchoice + +config COREBOOT_ROMSIZE_KB + int + default 128 if COREBOOT_ROMSIZE_KB_128 + default 256 if COREBOOT_ROMSIZE_KB_256 + default 512 if COREBOOT_ROMSIZE_KB_512 + default 1024 if COREBOOT_ROMSIZE_KB_1024 + default 2048 if COREBOOT_ROMSIZE_KB_2048 + help + Map the config names to an integer. + +endmenu + diff --git a/src/mainboard/a-trend/Kconfig b/src/mainboard/a-trend/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/a-trend/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/a-trend/atc-6220/devicetree.cb b/src/mainboard/a-trend/atc-6220/devicetree.cb new file mode 100644 index 0000000000..700f7c471b --- /dev/null +++ b/src/mainboard/a-trend/atc-6220/devicetree.cb @@ -0,0 +1,59 @@ +chip northbridge/intel/i440bx # Northbridge + device apic_cluster 0 on # APIC cluster + chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually) + device apic 0 on end # APIC + end + end + device pci_domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 7.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!) + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.6 on # Consumer IR + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 7.1 on end # IDE + device pci 7.2 on end # USB + device pci 7.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end +end diff --git a/src/mainboard/a-trend/atc-6240/devicetree.cb b/src/mainboard/a-trend/atc-6240/devicetree.cb new file mode 100644 index 0000000000..2a8caec160 --- /dev/null +++ b/src/mainboard/a-trend/atc-6240/devicetree.cb @@ -0,0 +1,69 @@ +chip northbridge/intel/i440bx # Northbridge + device apic_cluster 0 on # APIC cluster + chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually) + device apic 0 on end # APIC + end + end + device pci_domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 7.0 on # ISA bridge + chip superio/winbond/w83627hf # Super I/O + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.6 on # Consumer IR + io 0x60 = 0x00 + end + device pnp 3f0.7 on # Game port / MIDI / GPIO 1 + io 0x60 = 0x201 + io 0x62 = 0x330 + irq 0x70 = 9 + end + device pnp 3f0.8 off # GPIO 2 / WDT + end + device pnp 3f0.9 off # GPIO 3 + end + device pnp 3f0.a off # ACPI + end + device pnp 3f0.b off # HWM (TODO) + end + end + end + device pci 7.1 on end # IDE + device pci 7.2 on end # USB + device pci 7.3 on end # ACPI + device pci c.0 on end # Onboard audio (ES1371) + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end +end diff --git a/src/mainboard/abit/Kconfig b/src/mainboard/abit/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/abit/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/abit/be6-ii_v2_0/devicetree.cb b/src/mainboard/abit/be6-ii_v2_0/devicetree.cb new file mode 100644 index 0000000000..d2200d2824 --- /dev/null +++ b/src/mainboard/abit/be6-ii_v2_0/devicetree.cb @@ -0,0 +1,59 @@ +chip northbridge/intel/i440bx # Northbridge + device apic_cluster 0 on # APIC cluster + chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually) + device apic 0 on end # APIC + end + end + device pci_domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 7.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!) + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.6 on # Consumer IR + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 7.1 on end # IDE, UDMA/33 (part of 82371EB) + device pci 7.2 on end # USB + device pci 7.3 on end # ACPI + device pci 13.0 on end # IDE, UDMA/66 (HPT366 controller) + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + register "ide0_drive0_udma33_enable" = "1" + register "ide0_drive1_udma33_enable" = "1" + register "ide1_drive0_udma33_enable" = "1" + register "ide1_drive1_udma33_enable" = "1" + end + end +end diff --git a/src/mainboard/advantech/Kconfig b/src/mainboard/advantech/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/advantech/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/advantech/pcm-5820/devicetree.cb b/src/mainboard/advantech/pcm-5820/devicetree.cb new file mode 100644 index 0000000000..b416e9afce --- /dev/null +++ b/src/mainboard/advantech/pcm-5820/devicetree.cb @@ -0,0 +1,56 @@ +chip northbridge/amd/gx1 # Northbridge + device pci_domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + chip southbridge/amd/cs5530 # Southbridge + device pci 12.0 on # ISA bridge + chip superio/winbond/w83977f # SUper I/O + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.4 on # RTC / On-Now control + io 0x60 = 0x70 + irq 0x70 = 8 + end + device pnp 3f0.5 on # PS/2 keyboard / mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.6 on # IR + # TODO? + end + device pnp 3f0.7 on # GPIO 1 + # TODO? + end + device pnp 3f0.8 on # GPIO 2 + # TODO? + end + end + end + device pci 12.1 on end # SMI + device pci 12.2 on end # IDE + device pci 12.3 on end # Audio (onboard) + device pci 12.4 on end # VGA + device pci 13.0 on end # USB + register "ide0_enable" = "1" + register "ide1_enable" = "1" + end + end + chip cpu/amd/model_gx1 # CPU + end +end diff --git a/src/mainboard/amd/Kconfig b/src/mainboard/amd/Kconfig new file mode 100644 index 0000000000..f16f5e1dca --- /dev/null +++ b/src/mainboard/amd/Kconfig @@ -0,0 +1 @@ +source "src/mainboard/amd/serengeti_cheetah/Kconfig"
\ No newline at end of file diff --git a/src/mainboard/amd/db800/devicetree.cb b/src/mainboard/amd/db800/devicetree.cb new file mode 100644 index 0000000000..d79fb51c2c --- /dev/null +++ b/src/mainboard/amd/db800/devicetree.cb @@ -0,0 +1,68 @@ +chip northbridge/amd/lx + device pci_domain 0 on + device pci 1.0 on end # Northbridge + device pci 1.1 on end # Graphics + chip southbridge/amd/cs5536 + # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK + # SIRQ Mode = Active(Quiet) mode. Save power.... + # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse, UARTs, etc IRQs. OK + register "lpc_serirq_enable" = "0x0000105a" + register "lpc_serirq_polarity" = "0x0000EFA5" + register "lpc_serirq_mode" = "1" + register "enable_gpio_int_route" = "0x0D0C0700" + register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash + register "enable_USBP4_device" = "1" # 0: host, 1:device + register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) + register "com1_enable" = "0" + register "com1_address" = "0x3F8" + register "com1_irq" = "4" + register "com2_enable" = "0" + register "com2_address" = "0x2F8" + register "com2_irq" = "3" + register "unwanted_vpci[0]" = "0" # End of list has a zero + device pci d.0 on end # Ethernet + device pci e.0 on end # Slot1 + device pci f.0 on # ISA Bridge + chip superio/winbond/w83627hf + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off end # Com2 + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off end # CIR + device pnp 2e.7 off end # GAME_MIDI_GIPO1 + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b off end # HW Monitor + end + end + device pci f.2 on end # IDE Controller + device pci f.3 on end # Audio + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + end + end + # APIC cluster is late CPU init. + device apic_cluster 0 on + chip cpu/amd/model_lx + device apic 0 on end + end + end +end + diff --git a/src/mainboard/amd/dbm690t/devicetree.cb b/src/mainboard/amd/dbm690t/devicetree.cb new file mode 100644 index 0000000000..d873681351 --- /dev/null +++ b/src/mainboard/amd/dbm690t/devicetree.cb @@ -0,0 +1,117 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_S1G1 + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on # southbridge + chip southbridge/amd/rs690 + device pci 0.0 on end # HT 0x7910 + device pci 1.0 on # Internal Graphics P2P bridge 0x7912 + chip drivers/pci/onboard + device pci 5.0 on end # Internal Graphics 0x791F + register "rom_address" = "0xfff00000" + end + end + device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913 + device pci 3.0 off end # PCIE P2P bridge 0x791b + device pci 4.0 on end # PCIE P2P bridge 0x7914 + device pci 5.0 on end # PCIE P2P bridge 0x7915 + device pci 6.0 on end # PCIE P2P bridge 0x7916 + device pci 7.0 on end # PCIE P2P bridge 0x7917 + device pci 8.0 off end # NB/SB Link P2P bridge + register "vga_rom_address" = "0xfff00000" + register "gpp_configuration" = "4" + register "port_enable" = "0xfc" + register "gfx_dev2_dev3" = "1" + register "gfx_dual_slot" = "0" + register "gfx_lane_reversal" = "0" + register "gfx_tmds" = "0" + register "gfx_compliance" = "0" + register "gfx_reconfiguration" = "1" + register "gfx_link_width" = "0" + end + chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus + device pci 12.0 on end # SATA 0x4380 + device pci 13.0 on end # USB 0x4387 + device pci 13.1 on end # USB 0x4388 + device pci 13.2 on end # USB 0x4389 + device pci 13.3 on end # USB 0x438a + device pci 13.4 on end # USB 0x438b + device pci 13.5 on end # USB 2 0x4386 + device pci 14.0 on # SM 0x4385 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + end # SM + device pci 14.1 on end # IDE 0x438c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x438d + chip superio/ite/it8712f + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 off end # EC + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # Mouse + irq 0x70 = 12 + end + device pnp 2e.7 off # GPIO, must be closed for unresolved reason. + end + device pnp 2e.8 off # MIDI + io 0x60 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.9 off # GAME + io 0x60 = 0x220 + end + device pnp 2e.a off end # CIR + end #superio/ite/it8712f + end #LPC + device pci 14.4 on end # PCI 0x4384 + device pci 14.5 on end # ACI 0x4382 + device pci 14.6 on end # MCI 0x438e + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "hda_viddid" = "0x10ec0882" + end #southbridge/amd/sb600 + end # device pci 18.0 + + device pci 18.0 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end #northbridge/amd/amdk8 + end #pci_domain +end #northbridge/amd/amdk8/root_complex + diff --git a/src/mainboard/amd/norwich/devicetree.cb b/src/mainboard/amd/norwich/devicetree.cb new file mode 100644 index 0000000000..bc08b95954 --- /dev/null +++ b/src/mainboard/amd/norwich/devicetree.cb @@ -0,0 +1,41 @@ +chip northbridge/amd/lx + device pci_domain 0 on + device pci 1.0 on end # Northbridge + device pci 1.1 on end # Graphics + chip southbridge/amd/cs5536 + # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK + # SIRQ Mode = Active(Quiet) mode. Save power.... + # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK + register "lpc_serirq_enable" = "0x00001002" + register "lpc_serirq_polarity" = "0x0000EFFD" + register "lpc_serirq_mode" = "1" + register "enable_gpio_int_route" = "0x0D0C0700" + register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash + register "enable_USBP4_device" = "0" #0: host, 1:device + register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) + register "com1_enable" = "1" + register "com1_address" = "0x3F8" + register "com1_irq" = "4" + register "com2_enable" = "0" + register "com2_address" = "0x2F8" + register "com2_irq" = "3" + register "unwanted_vpci[0]" = "0" # End of list has a zero + device pci b.0 on end # Slot 3 + device pci c.0 on end # Slot 4 + device pci d.0 on end # Slot 1 + device pci e.0 on end # Slot 2 + device pci f.0 on end # ISA Bridge + device pci f.2 on end # IDE Controller + device pci f.3 on end # Audio + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + end + end + # APIC cluster is late CPU init. + device apic_cluster 0 on + chip cpu/amd/model_lx + device apic 0 on end + end + end +end + diff --git a/src/mainboard/amd/pistachio/devicetree.cb b/src/mainboard/amd/pistachio/devicetree.cb new file mode 100644 index 0000000000..0306417245 --- /dev/null +++ b/src/mainboard/amd/pistachio/devicetree.cb @@ -0,0 +1,77 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_AM2 + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on # southbridge, K8 HT Configuration + chip southbridge/amd/rs690 + device pci 0.0 on end # HT 0x7910 + # device pci 0.1 off end # CLK + device pci 1.0 on # Internal Graphics P2P bridge 0x7912 + chip drivers/pci/onboard + device pci 5.0 on end # Internal Graphics 0x791F + register "rom_address" = "0xfff00000" + end + end + device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913 + device pci 3.0 off end # PCIE P2P bridge 0x791b + device pci 4.0 on end # PCIE P2P bridge 0x7914 + device pci 5.0 on end # PCIE P2P bridge 0x7915 + device pci 6.0 on end # PCIE P2P bridge 0x7916 + device pci 7.0 on end # PCIE P2P bridge 0x7917 + device pci 8.0 off end # NB/SB Link P2P bridge + register "vga_rom_address" = "0xfff00000" + register "gpp_configuration" = "4" + register "port_enable" = "0xfc" + register "gfx_dev2_dev3" = "1" + register "gfx_dual_slot" = "0" + register "gfx_lane_reversal" = "0" + register "gfx_tmds" = "0" + register "gfx_compliance" = "0" + register "gfx_reconfiguration" = "1" + register "gfx_link_width" = "0" + end + chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus + device pci 12.0 on end # SATA 0x4380 + device pci 13.0 on end # USB 0x4387 + device pci 13.1 on end # USB 0x4388 + device pci 13.2 on end # USB 0x4389 + device pci 13.3 on end # USB 0x438a + device pci 13.4 on end # USB 0x438b + device pci 13.5 on end # USB 2 0x4386 + device pci 14.0 on # SM 0x4385 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 off end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 off end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 off end + end + end # SM + device pci 14.1 on end # IDE 0x438c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on end # LPC 0x438d + device pci 14.4 on end # PCI 0x4384 + device pci 14.5 on end # ACI 0x4382 + device pci 14.6 on end # MCI 0x438e + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "hda_viddid" = "0x10ec0882" + end #southbridge/amd/sb600 + end # device pci 18.0 + + device pci 18.1 on end # K8 Address Map + device pci 18.2 on end # K8 DRAM Controller and HT Trace Mode + device pci 18.3 on end # K8 Miscellaneous Control + end #northbridge/amd/amdk8 + end #pci_domain +end #northbridge/amd/amdk8/root_complex + diff --git a/src/mainboard/amd/rumba/devicetree.cb b/src/mainboard/amd/rumba/devicetree.cb new file mode 100644 index 0000000000..8c7de64ce7 --- /dev/null +++ b/src/mainboard/amd/rumba/devicetree.cb @@ -0,0 +1,21 @@ +chip northbridge/amd/gx2 + device apic_cluster 0 on + chip cpu/amd/model_gx2 + device apic 0 on end + end + end + device pci_domain 0 on + device pci 1.0 on end + device pci 1.1 on end + chip southbridge/amd/cs5536 + register "lpc_serirq_enable" = "0x80" # enabled with default timing + device pci d.0 on end # Realtek 8139 LAN + device pci f.0 on end # ISA Bridge + device pci f.2 on end # IDE Controller + device pci f.3 on end # Audio + device pci f.4 on end # OHCI + device pci f.4 on end # UHCI + end + end +end + diff --git a/src/mainboard/amd/serengeti_cheetah/Kconfig b/src/mainboard/amd/serengeti_cheetah/Kconfig new file mode 100644 index 0000000000..bb1571de95 --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/Kconfig @@ -0,0 +1,49 @@ +choice + prompt "Mainboard model" + depends on VENDOR_AMD + +config BOARD_AMD_SERENGETI_CHEETAH + bool "SERENGETI_CHEETAH" + select ARCH_X86 + select CPU_AMD_K8 + select CPU_AMD_SOCKET_F + select NORTHBRIDGE_AMD_AMDK8 + select NORTHBRIDGE_AMD_AMDK8_ROOT_COMPLEX + select SOUTHBRIDGE_AMD_AMD8111 + select SUPERIO_WINBOND_W83627THF + select PIRQ_TABLE + select MMCONF_SUPPORT + select USE_PRINTK_IN_CAR + help + AMD Serengeti Series mainboards +endchoice + +config MAINBOARD_DIR + string + default amd/serengeti_cheetah + depends on BOARD_AMD_SERENGETI_CHEETAH + +#config DCACHE_RAM_BASE +# hex +# default 0xffdf8000 +# depends on BOARD_AMD_SERENGETI_CHEETAH +# +#config DCACHE_RAM_SIZE +# hex +# default 0x8000 +# depends on BOARD_AMD_SERENGETI_CHEETAH + +config LB_CKS_RANGE_END + int + default 122 + depends on BOARD_AMD_SERENGETI_CHEETAH + +config LB_CKS_LOC + int + default 123 + depends on BOARD_AMD_SERENGETI_CHEETAH + +config MAINBOARD_PART_NUMBER + string + default "Serengeti-Cheetah" + depends on BOARD_AMD_SERENGETI_CHEETAH diff --git a/src/mainboard/amd/serengeti_cheetah/Makefile.inc b/src/mainboard/amd/serengeti_cheetah/Makefile.inc new file mode 100644 index 0000000000..c54df30683 --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/Makefile.inc @@ -0,0 +1,95 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or +## modify it under the terms of the GNU General Public License as +## published by the Free Software Foundation; version 2 of +## the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +## MA 02110-1301 USA +## + +## +## This mainboard requires DCACHE_AS_RAM enabled. It won't work without. +## + +driver-y += mainboard.o + +#needed by irq_tables and mptable and acpi_tables +obj-y += get_bus_conf.o +obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o +obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_HAVE_ACPI_TABLES) += fadt.o + +#./ssdt.o is in northbridge/amd/amdk8/Config.lb +obj-$(CONFIG_ACPI_SSDTX_NUM) += ssdt2.o +obj-$(CONFIG_ACPI_SSDTX_NUM) += ssdt3.o +obj-$(CONFIG_HAVE_ACPI_TABLES) += ssdt4.o + +# This is part of the conversion to init-obj and away from included code. + +initobj-y += crt0.o +# FIXME in $(top)/Makefile +crt0-y += ../../../../src/cpu/x86/16bit/entry16.inc +crt0-y += ../../../../src/cpu/x86/32bit/entry32.inc +crt0-y += ../../../../src/cpu/x86/16bit/reset16.inc +crt0-y += ../../../../src/arch/i386/lib/id.inc +crt0-y += ../../../../src/cpu/amd/car/cache_as_ram.inc +crt0-y += auto.inc + +ldscript-y += ../../../../src/arch/i386/init/ldscript_fallback_cbfs.lb +ldscript-y += ../../../../src/cpu/x86/16bit/entry16.lds +ldscript-y += ../../../../src/cpu/x86/16bit/reset16.lds +ldscript-y += ../../../../src/arch/i386/lib/id.lds +ldscript-y += ../../../../src/arch/i386/lib/failover.lds + +ifdef POST_EVALUATION + +MAINBOARD_OPTIONS=\ + -DCONFIG_AP_IN_SIPI_WAIT=1 \ + -DCONFIG_USE_PRINTK_IN_CAR=1 \ + -DCONFIG_HAVE_HIGH_TABLES=1 \ + -DCONFIG_MMCONF_SUPPORT=1 \ + -DCONFIG_MMCONF_BASE_ADDRESS=0xf0000000 + +$(obj)/dsdt.c: $(src)/mainboard/$(MAINBOARDDIR)/dsdt.asl + iasl -p dsdt -tc $(src)/mainboard/$(MAINBOARDDIR)/dsdt.asl + mv dsdt.hex $@ + +$(obj)/mainboard/$(MAINBOARDDIR)/dsdt.o: $(obj)/dsdt.c + $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c $< -o $@ + +$(obj)/ssdt2.c: $(src)/mainboard/$(MAINBOARDDIR)/dx/pci2.asl + iasl -p $(CURDIR)/pci2 -tc $(CONFIG_MAINBOARD)/dx/pci2.asl + perl -pi -e 's/AmlCode/AmlCode_ssdt2/g' pci2.hex + mv pci2.hex ssdt2.c + +$(obj)/ssdt3.c: $(src)/mainboard/$(MAINBOARDDIR)/dx/pci3.asl" + iasl -p $(CURDIR)/pci3 -tc $(CONFIG_MAINBOARD)/ + perl -pi -e 's/AmlCode/AmlCode_ssdt3/g' pci3.hex + mv pci3.hex ssdt3.c + +$(obj)/ssdt4.c: $(src)/mainboard/$(MAINBOARDDIR)/dx/pci4.asl" + iasl -p $(CURDIR)/pci4 -tc $(CONFIG_MAINBOARD)/dx/pci4.asl + perl -pi -e 's/AmlCode/AmlCode_ssdt4/g' pci4.hex + mv pci4.hex ssdt4.c + +$(obj)/mainboard/$(MAINBOARDDIR)/auto.inc: $(src)/mainboard/$(MAINBOARDDIR)/auto.c $(obj)/option_table.h + $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c -S $(src)/mainboard/$(MAINBOARDDIR)/auto.c -o $@ + perl -e 's/\.rodata/.rom.data/g' -pi $@ + perl -e 's/\.text/.section .rom.text/g' -pi $@ + +endif + diff --git a/src/mainboard/amd/serengeti_cheetah/devicetree.cb b/src/mainboard/amd/serengeti_cheetah/devicetree.cb new file mode 100644 index 0000000000..b9742b4a46 --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah/devicetree.cb @@ -0,0 +1,159 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_F + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on # northbridge + # devices on link 0, link 0 == LDT 0 + chip southbridge/amd/amd8132 + # the on/off keyword is mandatory + device pci 0.0 on end + device pci 0.1 on end + device pci 1.0 on end + device pci 1.1 on end + end + chip southbridge/amd/amd8111 + # this "device pci 0.0" is the parent the next one + # PCI bridge + device pci 0.0 on + device pci 0.0 on end + device pci 0.1 on end + device pci 0.2 off end + device pci 1.0 off end + end + device pci 1.0 on + chip superio/winbond/w83627hf + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on end + device pci 1.2 on end + device pci 1.3 on + chip drivers/i2c/i2cmux # pca9556 smbus mux + device i2c 18 on #0 pca9516 1 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + end + device i2c 18 on #1 pca9516 2 + chip drivers/generic/generic #dimm 1-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 1-2-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 1-2-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 1-3-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 1-3-1 + device i2c 57 on end + end + end + end + end # acpi + device pci 1.5 off end + device pci 1.6 off end + register "ide0_enable" = "1" + register "ide1_enable" = "1" + end + end # device pci 18.0 + + device pci 18.0 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + chip northbridge/amd/amdk8 + device pci 19.0 on # northbridge + chip southbridge/amd/amd8151 + # the on/off keyword is mandatory + device pci 0.0 on end + device pci 1.0 on end + end + end # device pci 19.0 + + device pci 19.0 on end + device pci 19.0 on end + device pci 19.1 on end + device pci 19.2 on end + device pci 19.3 on end + end + + + end #pci_domain +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 on end # pci_regs_all +# device pnp 0.2 off end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 off end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# end + +end + + diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/devicetree.cb b/src/mainboard/amd/serengeti_cheetah_fam10/devicetree.cb new file mode 100644 index 0000000000..71c4daafc1 --- /dev/null +++ b/src/mainboard/amd/serengeti_cheetah_fam10/devicetree.cb @@ -0,0 +1,152 @@ +chip northbridge/amd/amdfam10/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_F_1207 #L1 and DDR2 + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdfam10 + device pci 18.0 on # northbridge + # devices on link 0, link 0 == LDT 0 + chip southbridge/amd/amd8132 + # the on/off keyword is mandatory + device pci 0.0 on end + device pci 0.1 on end + device pci 1.0 on end + device pci 1.1 on end + end + chip southbridge/amd/amd8111 + # this "device pci 0.0" is the parent the next one + # PCI bridge + device pci 0.0 on + device pci 0.0 on end + device pci 0.1 on end + device pci 0.2 off end + device pci 1.0 off end + end + device pci 1.0 on + chip superio/winbond/w83627hf + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on end + device pci 1.2 on end + device pci 1.3 on + chip drivers/i2c/i2cmux2 # pca9556 smbus mux + chip drivers/i2c/i2cmux2 # pca9556 smbus mux + device i2c 18 on #0 pca9516 1 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + end + device i2c 18 on #1 pca9516 2 + chip drivers/generic/generic #dimm 1-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 53 on end + end + end + end + end + end # acpi + device pci 1.5 off end + device pci 1.6 off end + register "ide0_enable" = "1" + register "ide1_enable" = "1" + end + end # device pci 18.0 + + device pci 18.0 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end +# device pci 00.5 on end + end + end #pci_domain + #for node 32 to node 63 +# device pci_domain 0 on +# chip northbridge/amd/amdfam10 +# device pci 00.0 on end# northbridge +# device pci 00.0 on end +# device pci 00.0 on end +# device pci 00.0 on end +# device pci 00.1 on end +# device pci 00.2 on end +# device pci 00.3 on end +# device pci 00.4 on end +# device pci 00.5 on end +# end +# end #pci_domain + +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 on end # pci_regs_all +# device pnp 0.2 off end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 off end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# device pnp 0.8 off end # hard reset +# device pnp 0.9 off end # mcp55 +# device pnp 0.a on end # GH ext table +# end + +end + + diff --git a/src/mainboard/arima/Kconfig b/src/mainboard/arima/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/arima/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/arima/hdama/devicetree.cb b/src/mainboard/arima/hdama/devicetree.cb new file mode 100644 index 0000000000..2552e18cf7 --- /dev/null +++ b/src/mainboard/arima/hdama/devicetree.cb @@ -0,0 +1,196 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_940 + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on # northbridge + # devices on link 0, link 0 == LDT 0 + chip southbridge/amd/amd8131 + # the on/off keyword is mandatory + device pci 0.0 on # PCIX bridge + ## On board NIC A + #chip drivers/generic/generic + # device pci 3.0 on + # irq 0 = 0x13 + # end + #end + ## On board NIC B + #chip drivers/generic/generic + # device pci 4.0 on + # irq 0 = 0x13 + # end + #end + ## PCI Slot 3 + #chip drivers/generic/generic + # device pci 1.0 on + # irq 0 = 0x11 + # irq 1 = 0x12 + # irq 2 = 0x13 + # irq 3 = 0x10 + # end + #end + ## PCI Slot 4 + #chip drivers/generic/generic + # device pci 2.0 on + # irq 0 = 0x12 + # irq 1 = 0x13 + # irq 2 = 0x10 + # irq 3 = 0x11 + # end + #end + end + device pci 0.1 on end # IOAPIC + device pci 1.0 on # PCIX bridge + ## PCI Slot 1 + #chip drivers/generic/generic + # device pci 1.0 on + # irq 0 = 0x11 + # irq 1 = 0x12 + # irq 2 = 0x13 + # irq 3 = 0x10 + # end + #end + ## PCI Slot 2 + #chip drivers/generic/generic + # device pci 2.0 on + # irq 0 = 0x12 + # irq 1 = 0x13 + # irq 2 = 0x10 + # irq 3 = 0x11 + # end + #end + end + device pci 1.1 on end # IOAPIC + end + chip southbridge/amd/amd8111 + # this "device pci 0.0" is the parent of the next one + # PCI bridge + device pci 0.0 on + device pci 0.0 on end # USB0 + device pci 0.1 on end # USB1 + device pci 0.2 off end # USB 2.0 + device pci 1.0 off end # LAN + chip drivers/pci/onboard + device pci 6.0 on end # ATI Rage XL + register "rom_address" = "0xfff80000" + end + ## PCI Slot 5 (correct?) + #chip drivers/generic/generic + # device pci 5.0 on + # irq 0 = 0x11 + # irq 1 = 0x12 + # irq 2 = 0x13 + # irq 3 = 0x10 + # end + #end + ## PCI Slot 6 (correct?) + #chip drivers/generic/generic + # device pci 4.0 on + # irq 0 = 0x10 + # irq 1 = 0x11 + # irq 2 = 0x12 + # irq 3 = 0x13 + # end + #end + + end + # LPC bridge + device pci 1.0 on + chip superio/nsc/pc87360 + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 off # Com 2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Com 1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.4 off end # SWC + device pnp 2e.5 off end # Mouse + device pnp 2e.6 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.7 off end # GPIO + device pnp 2e.8 off end # ACB + device pnp 2e.9 off end # FSCM + device pnp 2e.a off end # WDT + end + end + device pci 1.1 on end # IDE + device pci 1.2 on end # SMBus 2.0 + device pci 1.3 on # System Management + chip drivers/generic/generic + #phillips pca9545 smbus mux + device i2c 70 on + # analog_devices adm1026 + chip drivers/generic/generic + device i2c 2c on end + end + end + device i2c 70 on end + device i2c 70 on end + device i2c 70 on end + end + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 57 on end + end + end + device pci 1.5 off end # AC97 Audio + device pci 1.6 on end # AC97 Modem + register "ide0_enable" = "1" + register "ide1_enable" = "1" + end + end # device pci 18.0 + + device pci 18.0 on end # LDT1 + device pci 18.0 on end # LDT2 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end # chip northbridge/amd/amdk8 + chip northbridge/amd/amdk8 + device pci 19.0 on end + device pci 19.0 on end + device pci 19.0 on end + device pci 19.1 on end + device pci 19.2 on end + device pci 19.3 on end + end + end +end + diff --git a/src/mainboard/artecgroup/Kconfig b/src/mainboard/artecgroup/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/artecgroup/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/artecgroup/dbe61/devicetree.cb b/src/mainboard/artecgroup/dbe61/devicetree.cb new file mode 100644 index 0000000000..16e97fccf5 --- /dev/null +++ b/src/mainboard/artecgroup/dbe61/devicetree.cb @@ -0,0 +1,42 @@ +chip northbridge/amd/lx + device pci_domain 0 on + device pci 1.0 on end # Northbridge + device pci 1.1 on end # Graphics + chip southbridge/amd/cs5536 + # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK + # SIRQ Mode = Active(Quiet) mode. Save power.... + # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK + register "lpc_serirq_enable" = "0x00001002" + register "lpc_serirq_polarity" = "0x0000EFFD" + register "lpc_serirq_mode" = "1" + register "enable_gpio_int_route" = "0x0D0C0700" + register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash + register "enable_USBP4_device" = "0" #0: host, 1:device + register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) + register "com1_enable" = "0" + register "com1_address" = "0x2F8" + register "com1_irq" = "3" + register "com2_enable" = "1" + register "com2_address" = "0x3F8" + register "com2_irq" = "4" + register "unwanted_vpci[0]" = "0" # End of list has a zero + device pci b.0 on end # Slot 3 + device pci c.0 on end # Slot 4 + device pci d.0 on end # Slot 1 + device pci e.0 on end # Slot 2 + device pci f.0 on end # ISA Bridge + device pci f.2 on end # IDE Controller + device pci f.3 on end # Audio + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + end + end + # APIC cluster is late CPU init. + device apic_cluster 0 on + chip cpu/amd/model_lx + device apic 0 on end + end + end + +end + diff --git a/src/mainboard/asi/Kconfig b/src/mainboard/asi/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/asi/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/asi/mb_5blgp/devicetree.cb b/src/mainboard/asi/mb_5blgp/devicetree.cb new file mode 100644 index 0000000000..f50be6e70a --- /dev/null +++ b/src/mainboard/asi/mb_5blgp/devicetree.cb @@ -0,0 +1,55 @@ +chip northbridge/amd/gx1 # Northbridge + device pci_domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + chip southbridge/amd/cs5530 # Southbridge + device pci 0f.0 on end # Ethernet + device pci 12.0 on # ISA bridge + chip superio/nsc/pc87351 # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.e on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.4 on # System wake-up control (SWC) + irq 0x60 = 0x500 + end + device pnp 2e.5 on # PS/2 mouse + irq 0x70 = 12 + end + device pnp 2e.6 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.7 on # GPIO + irq 0x60 = 0x800 + end + device pnp 2e.8 on # Fan speed control + irq 0x60 = 0x900 + end + end + end + device pci 12.1 off end # SMI + device pci 12.2 on end # IDE + device pci 12.3 on end # Audio + device pci 12.4 on end # VGA + device pci 13.0 on end # USB + register "ide0_enable" = "1" + register "ide1_enable" = "0" # No connector on this board + end + end + chip cpu/amd/model_gx1 # CPU + end +end diff --git a/src/mainboard/asi/mb_5blmp/devicetree.cb b/src/mainboard/asi/mb_5blmp/devicetree.cb new file mode 100644 index 0000000000..8ec750cda6 --- /dev/null +++ b/src/mainboard/asi/mb_5blmp/devicetree.cb @@ -0,0 +1,56 @@ +chip northbridge/amd/gx1 # Northbridge + device pci_domain 0 on + device pci 0.0 on end # Host bridge + chip southbridge/amd/cs5530 # Southbridge + device pci 0f.0 off end # Ethernet (Realtek RTL8139B) + device pci 12.0 on # ISA bridge + chip superio/nsc/pc87351 # Super I/O + device pnp 2e.4 on # PS/2 keyboard (+ mouse?) + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + # irq 0x72 = 12 + end + device pnp 2e.a on # PS/2 mouse + irq 0x70 = 12 + end + device pnp 2e.e on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.f off # Floppy + io 0x60 = 0x3f2 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.10 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.12 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + end + end + device pci 12.1 off end # SMI + device pci 12.2 on end # IDE + device pci 12.3 on end # Audio + device pci 12.4 on end # VGA (onboard) + # device pci 12.4 on # VGA (onboard) + # chip drivers/pci/onboard + # device pci 12.4 on end + # register "rom_address" = "0xfffc0000" # 256 KB image + # # register "rom_address" = "0xfff80000" # 512 KB image + # # register "rom_address" = "0xfff00000" # 1 MB image + # end + # end + device pci 13.0 on end # USB + register "ide0_enable" = "1" + register "ide1_enable" = "1" + end + end + chip cpu/amd/model_gx1 # CPU + end +end + diff --git a/src/mainboard/asus/Kconfig b/src/mainboard/asus/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/asus/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/asus/a8n_e/devicetree.cb b/src/mainboard/asus/a8n_e/devicetree.cb new file mode 100644 index 0000000000..ee8a7b4220 --- /dev/null +++ b/src/mainboard/asus/a8n_e/devicetree.cb @@ -0,0 +1,130 @@ +chip northbridge/amd/amdk8/root_complex # Root complex + device apic_cluster 0 on # APIC cluster + chip cpu/amd/socket_939 # Socket 939 CPU + device apic 0 on end # APIC + end + end + + device pci_domain 0 on # PCI domain + chip northbridge/amd/amdk8 # mc0 + device pci 18.0 on # Northbridge + # Devices on link 0, link 0 == LDT 0 + chip southbridge/nvidia/ck804 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/ite/it8712f # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 (N/A on this board) + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.4 on # Environment controller + io 0x60 = 0x290 + io 0x62 = 0x0000 + irq 0x70 = 0x00 + end + device pnp 2e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x71 = 2 + end + device pnp 2e.6 on # PS/2 mouse + irq 0x70 = 12 + irq 0x71 = 2 + end + device pnp 2e.7 on # GPIO config + io 0x60 = 0x0800 + # Set GPIO 1 & 2 + io 0x25 = 0x0000 + # Set GPIO 3 & 4 + io 0x27 = 0x2540 + # GPIO Polarity for Set 3 + io 0xb2 = 0x2100 + # GPIO Pin Internal Pull up for Set 3 + io 0xba = 0x0100 + # Simple I/O register config + io 0xc0 = 0x0000 + io 0xc2 = 0x2540 + io 0xc8 = 0x0000 + io 0xca = 0x0500 + end + device pnp 2e.8 on # Midi port + io 0x60 = 0x300 + irq 0x70 = 10 + end + device pnp 2e.9 on # Game port + io 0x60 = 0x201 + end + device pnp 2e.a off # IR (N/A on this board) + io 0x60 = 0x310 + irq 0x70 = 11 + end + end + end + device pci 1.1 on # SM 0 + # chip drivers/generic/generic #dimm 0-0-0 + # device i2c 50 on end + # end + # chip drivers/generic/generic #dimm 0-0-1 + # device i2c 51 on end + # end + # chip drivers/generic/generic #dimm 0-1-0 + # device i2c 52 on end + # end + # chip drivers/generic/generic #dimm 0-1-1 + # device i2c 53 on end + # end + # chip drivers/generic/generic #dimm 1-0-0 + # device i2c 54 on end + # end + # chip drivers/generic/generic #dimm 1-0-1 + # device i2c 55 on end + # end + # chip drivers/generic/generic #dimm 1-1-0 + # device i2c 56 on end + # end + # chip drivers/generic/generic #dimm 1-1-1 + # device i2c 57 on end + # end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # Onboard audio (ACI) + device pci 4.1 off end # Onboard modem (MCI), N/A + device pci 6.0 on end # IDE + device pci 7.0 on end # SATA 1 + device pci 8.0 on end # SATA 0 + device pci 9.0 on end # PCI + device pci a.0 on end # NIC + device pci b.0 on end # PCI E 3 + device pci c.0 on end # PCI E 2 + device pci d.0 on end # PCI E 1 + device pci e.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # register "mac_eeprom_smbus" = "3" + # register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end diff --git a/src/mainboard/asus/a8v-e_se/devicetree.cb b/src/mainboard/asus/a8v-e_se/devicetree.cb new file mode 100644 index 0000000000..6568e38729 --- /dev/null +++ b/src/mainboard/asus/a8v-e_se/devicetree.cb @@ -0,0 +1,96 @@ +chip northbridge/amd/amdk8/root_complex # Root complex + device apic_cluster 0 on # APIC cluster + chip cpu/amd/socket_939 # CPU + device apic 0 on end # APIC + end + end + device pci_domain 0 on # PCI domain + chip northbridge/amd/amdk8 # mc0 + device pci 18.0 on # Northbridge + # Devices on link 0, link 0 == LDT 0 + chip southbridge/via/vt8237r # Southbridge + register "ide0_enable" = "1" # Enable IDE channel 0 + register "ide1_enable" = "1" # Enable IDE channel 1 + register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0 + register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1 + register "fn_ctrl_lo" = "0" # Enable SB functions + register "fn_ctrl_hi" = "0xad" # Enable SB functions + device pci 0.0 on end # HT + device pci f.1 on end # IDE + device pci 11.0 on # LPC + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + chip superio/winbond/w83627ehg # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 (N/A on this board) + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 off # PS/2 keyboard (off) + end + device pnp 2e.106 off # Serial flash + io 0x60 = 0x100 + end + device pnp 2e.007 off # GPIO 1 + end + device pnp 2e.107 on # Game port + io 0x60 = 0x201 + end + device pnp 2e.207 on # MIDI + io 0x62 = 0x330 + irq 0x70 = 0xa + end + device pnp 2e.307 off # GPIO 6 + end + device pnp 2e.8 off # WDTO_PLED + end + device pnp 2e.009 on # GPIO 2 on LDN 9 is in sio_setup + end + device pnp 2e.109 off # GPIO 3 + end + device pnp 2e.209 off # GPIO 4 + end + device pnp 2e.309 on # GPIO5 + end + device pnp 2e.a off # ACPI + end + device pnp 2e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 0 + end + end + end + device pci 12.0 off end # VIA LAN (off, other chip used) + end + chip southbridge/via/k8t890 # "Southbridge" K8T890 + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end diff --git a/src/mainboard/asus/m2v-mx_se/devicetree.cb b/src/mainboard/asus/m2v-mx_se/devicetree.cb new file mode 100644 index 0000000000..2248fc6c23 --- /dev/null +++ b/src/mainboard/asus/m2v-mx_se/devicetree.cb @@ -0,0 +1,76 @@ +chip northbridge/amd/amdk8/root_complex # Root complex + device apic_cluster 0 on # APIC cluster + chip cpu/amd/socket_AM2 # CPU + device apic 0 on end # APIC + end + end + device pci_domain 0 on # PCI domain + chip northbridge/amd/amdk8 # mc0 + device pci 18.0 on # Northbridge + # Devices on link 0, link 0 == LDT 0 + chip southbridge/via/vt8237r # Southbridge + register "ide0_enable" = "1" # Enable IDE channel 0 + register "ide1_enable" = "1" # Enable IDE channel 1 + register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0 + register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1 + register "fn_ctrl_lo" = "0xc0" # Enable SB functions + register "fn_ctrl_hi" = "0x1d" # Enable SB functions + device pci 0.0 on end # HT + device pci f.1 on end # IDE + device pci 11.0 on # LPC + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + chip superio/ite/it8712f # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # Environment controller + io 0x60 = 0x290 + io 0x62 = 0x230 + irq 0x70 = 0x00 + end + device pnp 2e.5 off end # PS/2 keyboard + device pnp 2e.6 off end # PS/2 mouse + device pnp 2e.7 off end # GPIO config + device pnp 2e.8 off end # Midi port + device pnp 2e.9 off end # Game port + device pnp 2e.a off end # IR + end + end + device pci 12.0 on end # VIA LAN + device pci 13.0 on end # br + device pci 13.1 on end # br2 need to have it here to discover it + end + chip southbridge/via/k8t890 # "Southbridge" K8M890 + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end diff --git a/src/mainboard/asus/mew-am/devicetree.cb b/src/mainboard/asus/mew-am/devicetree.cb new file mode 100644 index 0000000000..2ca0e68cda --- /dev/null +++ b/src/mainboard/asus/mew-am/devicetree.cb @@ -0,0 +1,60 @@ +chip northbridge/intel/i82810 # Northbridge + device apic_cluster 0 on # APIC cluster + chip cpu/intel/socket_PGA370 # CPU + device apic 0 on end # APIC + end + end + device pci_domain 0 on # PCI domain + device pci 0.0 on end # Graphics Memory Controller Hub (GMCH) + device pci 1.0 on end # Chipset Graphics Controller (CGC) + chip southbridge/intel/i82801xx # Southbridge + register "ide0_enable" = "1" + register "ide1_enable" = "1" + + device pci 1e.0 on end # PCI bridge + device pci 1f.0 on # ISA bridge + chip superio/smsc/smscsuperio # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 4 + end + device pnp 2e.4 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.5 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.7 on # PS/2 keyboard / mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 2e.9 on # Game port + io 0x60 = 0x201 + end + device pnp 2e.a on # Power-management events (PME) + io 0x60 = 0x600 + end + device pnp 2e.b on # MIDI port (MPU-401) + io 0x60 = 0x330 + irq 0x70 = 5 + end + end + end + device pci 1f.1 on end # IDE + device pci 1f.2 on end # USB + device pci 1f.3 on end # SMbus + device pci 1f.5 off end # AC'97 audio (N/A, uses CS4280 chip) + device pci 1f.6 off end # AC'97 modem (N/A) + end + end +end diff --git a/src/mainboard/asus/mew-vm/devicetree.cb b/src/mainboard/asus/mew-vm/devicetree.cb new file mode 100644 index 0000000000..5ff718604c --- /dev/null +++ b/src/mainboard/asus/mew-vm/devicetree.cb @@ -0,0 +1,58 @@ +chip northbridge/intel/i82810 + device pci_domain 0 on + device pci 0.0 on end # Host bridge + device pci 1.0 on # Onboard Video + #chip drivers/pci/onboard + # device pci 1.0 on end + # register "rom_address" = "0xfff80000" + #end + end + chip southbridge/intel/i82801xx # Southbridge + register "ide0_enable" = "1" + register "ide1_enable" = "1" + + device pci 1e.0 on # PCI Bridge + #chip drivers/pci/onboard + # device pci 1.0 on end + # register "rom_address" = "0xfff80000" + #end + end + device pci 1f.0 on # ISA/LPC? Bridge + chip superio/smsc/lpc47b272 + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.3 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.5 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.7 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # Keyboard interrupt + irq 0x72 = 12 # Mouse interrupt + end + device pnp 2e.a off end # ACPI + end + end + device pci 1f.1 on end # IDE + device pci 1f.2 on end # USB + device pci 1f.3 on end # SMBus + device pci 1f.5 off end # AC'97, no header on MEW-VM + device pci 1f.6 off end # AC'97 Modem (MC'97) + end + end + chip cpu/intel/socket_PGA370 + end +end + diff --git a/src/mainboard/asus/p2b-d/devicetree.cb b/src/mainboard/asus/p2b-d/devicetree.cb new file mode 100644 index 0000000000..befd946cc9 --- /dev/null +++ b/src/mainboard/asus/p2b-d/devicetree.cb @@ -0,0 +1,62 @@ +chip northbridge/intel/i440bx # Northbridge + device apic_cluster 0 on # APIC cluster + chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually) + device apic 0 on end # APIC + end + chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually) + device apic 1 on end # APIC + end + end + device pci_domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 4.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard / mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.9 on # GPIO 3 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 4.1 on end # IDE + device pci 4.2 on end # USB + device pci 4.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "1" + register "ide0_drive1_udma33_enable" = "1" + register "ide1_drive0_udma33_enable" = "1" + register "ide1_drive1_udma33_enable" = "1" + end + end +end diff --git a/src/mainboard/asus/p2b-ds/devicetree.cb b/src/mainboard/asus/p2b-ds/devicetree.cb new file mode 100644 index 0000000000..d40c96d27e --- /dev/null +++ b/src/mainboard/asus/p2b-ds/devicetree.cb @@ -0,0 +1,63 @@ +chip northbridge/intel/i440bx # Northbridge + device apic_cluster 0 on # APIC cluster + chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually) + device apic 0 on end # APIC + end + chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually) + device apic 1 on end # APIC + end + end + device pci_domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 4.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard / mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.9 on # GPIO 3 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 4.1 on end # IDE + device pci 4.2 on end # USB + device pci 4.3 on end # ACPI + device pci 6.0 on end # Onboard SCSI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "1" + register "ide0_drive1_udma33_enable" = "1" + register "ide1_drive0_udma33_enable" = "1" + register "ide1_drive1_udma33_enable" = "1" + end + end +end diff --git a/src/mainboard/asus/p2b-f/devicetree.cb b/src/mainboard/asus/p2b-f/devicetree.cb new file mode 100644 index 0000000000..183e9a2d0a --- /dev/null +++ b/src/mainboard/asus/p2b-f/devicetree.cb @@ -0,0 +1,59 @@ +chip northbridge/intel/i440bx # Northbridge + device apic_cluster 0 on # APIC cluster + chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually) + device apic 0 on end # APIC + end + end + device pci_domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 4.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!) + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.6 on # Consumer IR + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 4.1 on end # IDE + device pci 4.2 on end # USB + device pci 4.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end +end diff --git a/src/mainboard/asus/p2b/devicetree.cb b/src/mainboard/asus/p2b/devicetree.cb new file mode 100644 index 0000000000..e682fc19d9 --- /dev/null +++ b/src/mainboard/asus/p2b/devicetree.cb @@ -0,0 +1,59 @@ +chip northbridge/intel/i440bx # Northbridge + device apic_cluster 0 on # APIC cluster + chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually) + device apic 0 on end # APIC + end + end + device pci_domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 4.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard / mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.9 on # GPIO 3 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 4.1 on end # IDE + device pci 4.2 on end # USB + device pci 4.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end +end diff --git a/src/mainboard/asus/p3b-f/devicetree.cb b/src/mainboard/asus/p3b-f/devicetree.cb new file mode 100644 index 0000000000..183e9a2d0a --- /dev/null +++ b/src/mainboard/asus/p3b-f/devicetree.cb @@ -0,0 +1,59 @@ +chip northbridge/intel/i440bx # Northbridge + device apic_cluster 0 on # APIC cluster + chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually) + device apic 0 on end # APIC + end + end + device pci_domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 4.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!) + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.6 on # Consumer IR + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 4.1 on end # IDE + device pci 4.2 on end # USB + device pci 4.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end +end diff --git a/src/mainboard/axus/Kconfig b/src/mainboard/axus/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/axus/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/axus/tc320/devicetree.cb b/src/mainboard/axus/tc320/devicetree.cb new file mode 100644 index 0000000000..cf670c705a --- /dev/null +++ b/src/mainboard/axus/tc320/devicetree.cb @@ -0,0 +1,55 @@ +chip northbridge/amd/gx1 # Northbridge + device pci_domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + chip southbridge/amd/cs5530 # Southbridge + device pci 12.0 on # ISA bridge + chip superio/nsc/pc97317 # Super I/O + device pnp 2e.0 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.1 on # PS/2 mouse + irq 0x70 = 12 + end + device pnp 2e.2 on # RTC, advanced power control (APC) + io 0x60 = 0x70 + irq 0x70 = 8 + end + device pnp 2e.3 off # Floppy (N/A on this board) + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.4 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.5 off # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.6 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.7 on # GPIO + io 0x60 = 0xe0 + end + device pnp 2e.8 on # Power management + io 0x60 = 0xe800 + end + end + end + device pci 12.1 off end # SMI + device pci 12.2 off end # IDE + device pci 12.3 on end # Audio + device pci 12.4 on end # VGA (onboard) + device pci 13.0 on end # USB + # register "ide0_enable" = "1" + # register "ide1_enable" = "1" + end + end + chip cpu/amd/model_gx1 # CPU + end +end diff --git a/src/mainboard/azza/Kconfig b/src/mainboard/azza/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/azza/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/azza/pt-6ibd/devicetree.cb b/src/mainboard/azza/pt-6ibd/devicetree.cb new file mode 100644 index 0000000000..06bbaed6ba --- /dev/null +++ b/src/mainboard/azza/pt-6ibd/devicetree.cb @@ -0,0 +1,59 @@ +chip northbridge/intel/i440bx # Northbridge + device apic_cluster 0 on # APIC cluster + chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually) + device apic 0 on end # APIC + end + end + device pci_domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 7.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!) + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard / mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.6 on # Consumer IR + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 7.1 on end # IDE + device pci 7.2 on end # USB + device pci 7.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end +end diff --git a/src/mainboard/bcom/Kconfig b/src/mainboard/bcom/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/bcom/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/bcom/winnet100/devicetree.cb b/src/mainboard/bcom/winnet100/devicetree.cb new file mode 100644 index 0000000000..872b8f389d --- /dev/null +++ b/src/mainboard/bcom/winnet100/devicetree.cb @@ -0,0 +1,56 @@ +chip northbridge/amd/gx1 # Northbridge + device pci_domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + chip southbridge/amd/cs5530 # Southbridge + device pci 0f.0 on end # Ethernet (onboard) + device pci 12.0 on # ISA bridge + chip superio/nsc/pc97317 # Super I/O + device pnp 2e.0 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.1 on # PS/2 mouse + irq 0x70 = 12 + end + device pnp 2e.2 on # RTC, Advanced power control (APC) + io 0x60 = 0x70 + irq 0x70 = 8 + end + device pnp 2e.3 off # Floppy (N/A on this board) + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.4 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.5 on # COM2 (used for smartcard reader) + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.6 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.7 on # GPIO + io 0x60 = 0xe0 + end + device pnp 2e.8 on # Power management + io 0x60 = 0xe8 + end + end + end + device pci 12.1 off end # SMI + device pci 12.2 on end # IDE + device pci 12.3 on end # Audio + device pci 12.4 on end # VGA (onboard) + device pci 13.0 on end # USB + register "ide0_enable" = "1" + register "ide1_enable" = "0" # Not available/needed on this board + end + end + chip cpu/amd/model_gx1 # CPU + end +end diff --git a/src/mainboard/bcom/winnetp680/devicetree.cb b/src/mainboard/bcom/winnetp680/devicetree.cb new file mode 100644 index 0000000000..2461464dd4 --- /dev/null +++ b/src/mainboard/bcom/winnetp680/devicetree.cb @@ -0,0 +1,64 @@ +chip northbridge/via/cn700 # Northbridge + device pci_domain 0 on # PCI domain + device pci 0.0 on end # AGP Bridge + device pci 0.1 on end # Error Reporting + device pci 0.2 on end # Host Bus Control + device pci 0.3 on end # Memory Controller + device pci 0.4 on end # Power Management + device pci 0.7 on end # V-Link Controller + device pci 1.0 on end # PCI Bridge + chip southbridge/via/vt8237r # Southbridge + # Enable both IDE channels. + register "ide0_enable" = "1" + register "ide1_enable" = "1" + # Both cables are 40pin. + register "ide0_80pin_cable" = "0" + register "ide1_80pin_cable" = "0" + register "fn_ctrl_lo" = "0x80" + register "fn_ctrl_hi" = "0x1d" + device pci f.0 on end # IDE + device pci 10.0 on end # UHCI + device pci 10.1 on end # UHCI + device pci 10.2 on end # UHCI + device pci 10.3 on end # UHCI + device pci 10.4 on end # EHCI + device pci 11.0 on # Southbridge LPC + chip superio/winbond/w83697hf # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.6 off end # Consumer IR + device pnp 2e.7 off end # Game port, GPIO 1 + device pnp 2e.8 off end # MIDI port, GPIO 5 + device pnp 2e.9 off end # GPIO 2-4 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HWM + io 0x60 = 0x290 + end + end + end + device pci 11.5 on end # AC'97 audio + device pci 12.0 on end # Ethernet + end + end + device apic_cluster 0 on # APIC cluster + chip cpu/via/model_c7 # VIA C7 + device apic 0 on end # APIC + end + end +end diff --git a/src/mainboard/biostar/Kconfig b/src/mainboard/biostar/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/biostar/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/biostar/m6tba/devicetree.cb b/src/mainboard/biostar/m6tba/devicetree.cb new file mode 100644 index 0000000000..ed6af3124d --- /dev/null +++ b/src/mainboard/biostar/m6tba/devicetree.cb @@ -0,0 +1,53 @@ +chip northbridge/intel/i440bx # Northbridge + device apic_cluster 0 on # APIC cluster + chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually) + device apic 0 on end # APIC + end + end + device pci_domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 7.0 on # ISA bridge + chip superio/smsc/smscsuperio # Super I/O + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.4 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.5 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.7 on # PS/2 keyboard / mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.8 on # Aux I/O + end + end + end + device pci 7.1 on end # IDE + device pci 7.2 on end # USB + device pci 7.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end +end diff --git a/src/mainboard/broadcom/Kconfig b/src/mainboard/broadcom/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/broadcom/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/broadcom/blast/devicetree.cb b/src/mainboard/broadcom/blast/devicetree.cb new file mode 100644 index 0000000000..4c35506332 --- /dev/null +++ b/src/mainboard/broadcom/blast/devicetree.cb @@ -0,0 +1,148 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_940 + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on # northbridge + # devices on link 0 + chip southbridge/broadcom/bcm5780 # HT2000 + device pci 0.0 on end # PXB 1 0x0130 + device pci 1.0 on # PXB 2 0x0130 + device pci 4.0 on end # GB E 0x1668 vid = 0x14e4 + device pci 4.1 on end # GB E 0x1669 vid = 0x14e4 + end + device pci 2.0 on end # PCI E 1 #0x0132 + device pci 3.0 on end # PCI E 2 + device pci 4.0 on end # PCI E 3 + device pci 5.0 on end # PCI E 4 + end + chip southbridge/broadcom/bcm5785 # HT1000 + device pci 0.0 on # HT PXB 0x0036 + device pci d.0 on end # PPBX 0x0104 + device pci e.0 on end # SATA 0x024a + end + device pci 1.0 on # Legacy pci main 0x0205 + chip drivers/i2c/i2cmux2 # pca9554 smbus mux + device i2c 71 on end #0 pca9554 0 + device i2c 71 on end #0 pca9554 1 + device i2c 71 on end #0 pca9554 2 + device i2c 71 on end #0 pca9554 3 + device i2c 71 on end #0 pca9554 4 + device i2c 71 on end #0 pca9554 5 + device i2c 71 on #0 pca9554 6 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + end + device i2c 71 on #1 pca9554 7 + chip drivers/generic/generic #dimm 1-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 53 on end + end + end + end + + end + device pci 1.1 on end # IDE 0x0214 + device pci 1.2 on # LPC 0x0234 + chip superio/nsc/pc87417 + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 off # Com 2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Com 1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.4 off end # SWC + device pnp 2e.5 off end # Mouse + device pnp 2e.6 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.7 off end # GPIO + device pnp 2e.f off end # XBUS + device pnp 2e.10 on #RTC + io 0x60 = 0x70 + io 0x62 = 0x72 + end + end + end + device pci 1.3 on end # WDTimer 0x0238 + device pci 1.4 on end # XIOAPIC0 0x0235 + device pci 1.5 on end # XIOAPIC1 + device pci 1.6 on end # XIOAPIC2 + device pci 2.0 on end # USB 0x0223 + device pci 2.1 on end # USB + device pci 2.2 on end # USB + #when CONFIG_HT_CHAIN_END_UNITID_BASE (0,1) < CONFIG_HT_CHAIN_UNITID_BASE (6,,,,), + chip drivers/pci/onboard + device pci 4.0 on end # it is in bcm5785_0 bus, but the device id can not be changed even unitid is changed, fake one to get the rom_address + # if CONFIG_HT_CHAIN_END_UNITID_BASE=0, it is 5, if CONFIG_HT_CHAIN_END_UNITID_BASE=1, it is 4 + register "rom_address" = "0xfff80000" + end + end + #when CONFIG_HT_CHAIN_END_UNITID_BASE > CONFIG_HT_CHAIN_UNITID_BASE (6, ,,,,) +# chip drivers/pci/onboard +# device pci 0.0 on end # fake, will be disabled +# end +# chip drivers/pci/onboard +# device pci 5.0 on end # it is in bcm5785_0 bus, but the device id can not be changed even unitid is changed +# register "rom_address" = "0xfff80000" +# end + + + end # device pci 18.0 + + device pci 18.0 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + + + end #pci_domain +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 on end # pci_regs_all +# device pnp 0.2 off end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 off end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# end + +end + diff --git a/src/mainboard/compaq/Kconfig b/src/mainboard/compaq/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/compaq/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/compaq/deskpro_en_sff_p600/devicetree.cb b/src/mainboard/compaq/deskpro_en_sff_p600/devicetree.cb new file mode 100644 index 0000000000..be23f2f810 --- /dev/null +++ b/src/mainboard/compaq/deskpro_en_sff_p600/devicetree.cb @@ -0,0 +1,63 @@ +chip northbridge/intel/i440bx # Northbridge + device apic_cluster 0 on # APIC cluster + chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually) + device apic 0 on end # APIC + end + end + device pci_domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + device pci a.0 on end # NIC (onboard) + chip southbridge/intel/i82371eb # Southbridge + device pci 14.0 on # ISA bridge + # chip superio/nsc/pc97307 # Super I/O + chip superio/nsc/pc97317 # Super I/O (FIXME: Should be PC97307!) + device pnp 15c.0 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 15c.1 on # PS/2 mouse + irq 0x70 = 12 + end + device pnp 15c.2 on # RTC, APC + io 0x60 = 0x70 + irq 0x70 = 8 + end + device pnp 15c.3 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 15c.4 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 15c.5 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 15c.6 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 15c.7 on # GPIO 1 + end + device pnp 15c.8 on # Power management + end + end + end + device pci 14.1 on end # IDE + device pci 14.2 on end # USB + device pci 14.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end +end diff --git a/src/mainboard/dell/Kconfig b/src/mainboard/dell/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/dell/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/dell/s1850/devicetree.cb b/src/mainboard/dell/s1850/devicetree.cb new file mode 100644 index 0000000000..4e93a3aefb --- /dev/null +++ b/src/mainboard/dell/s1850/devicetree.cb @@ -0,0 +1,71 @@ +chip northbridge/intel/e7520 # mch + device pci_domain 0 on + chip southbridge/intel/i82801er # i82801er + # USB ports + device pci 1d.0 on end + device pci 1d.1 on end + device pci 1d.2 on end + device pci 1d.3 on end + device pci 1d.7 on end + + # -> Bridge + device pci 1e.0 on end + + # -> ISA + device pci 1f.0 on + chip superio/nsc/pc8374 + device pnp 2e.0 off end + device pnp 2e.1 off end + device pnp 2e.2 off end + device pnp 2e.3 on + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.4 off end + device pnp 2e.5 off end + device pnp 2e.6 off end + device pnp 2e.7 off end + device pnp 2e.8 off end + end + end + # -> IDE + device pci 1f.1 on end + # -> SATA + device pci 1f.2 on end + device pci 1f.3 on end + + register "pirq_a_d" = "0x8a07030b" + register "pirq_e_h" = "0x85808080" + end + device pci 00.0 on end + device pci 00.1 on end + device pci 01.0 on end + device pci 02.0 on + chip southbridge/intel/pxhd # pxhd1 + # Bus bridges and ioapics usually bus 1 + device pci 0.0 on + # On board gig e1000 + chip drivers/generic/generic + device pci 03.0 on end + device pci 03.1 on end + end + end + device pci 0.1 on end + device pci 0.2 on end + device pci 0.3 on end + end + end + device pci 04.0 on end + device pci 06.0 on end + end + device apic_cluster 0 on + chip cpu/intel/socket_mPGA604 # cpu 0 + device apic 0 on end + end + chip cpu/intel/socket_mPGA604 # cpu 1 + device apic 6 on end + end + end + register "intrline" = "0x00070100" +end + diff --git a/src/mainboard/digitallogic/Kconfig b/src/mainboard/digitallogic/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/digitallogic/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/digitallogic/adl855pc/devicetree.cb b/src/mainboard/digitallogic/adl855pc/devicetree.cb new file mode 100644 index 0000000000..f0106b0648 --- /dev/null +++ b/src/mainboard/digitallogic/adl855pc/devicetree.cb @@ -0,0 +1,61 @@ +chip northbridge/intel/i855pm + device pci_domain 0 on + device pci 0.0 on end + device pci 1.0 on end + chip southbridge/intel/i82801dbm +# pci 11.0 on end +# pci 11.1 on end +# pci 11.2 on end +# pci 11.3 on end +# pci 11.4 on end +# pci 11.5 on end +# pci 11.6 on end +# pci 12.0 on end + register "enable_usb" = "0" + register "enable_native_ide" = "0" + register "enable_usb" = "0" + register "enable_native_ide" = "0" + chip superio/winbond/w83627hf # link 1 + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off end # CIR + device pnp 2e.7 off end # GAME_MIDI_GIPO1 + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + end + register "com1" = "{1}" + # register "com1" = "{1, 0, 0x3f8, 4}" + # register "lpt" = "{1}" + end + end + end + device apic_cluster 0 on + chip cpu/intel/socket_mPGA479M + device apic 0 on end + end + end +end diff --git a/src/mainboard/digitallogic/msm586seg/devicetree.cb b/src/mainboard/digitallogic/msm586seg/devicetree.cb new file mode 100644 index 0000000000..30606b5b7e --- /dev/null +++ b/src/mainboard/digitallogic/msm586seg/devicetree.cb @@ -0,0 +1,16 @@ +chip cpu/amd/sc520 + device pci_domain 0 on + device pci 0.0 on end + + chip drivers/pci/onboard + device pci 12.0 on end # enet + end + chip drivers/pci/onboard + device pci 14.0 on end # 69000 + register "rom_address" = "0x2000000" + end +# register "com1" = "{1}" +# register "com1" = "{1, 0, 0x3f8, 4}" + end + +end diff --git a/src/mainboard/digitallogic/msm800sev/devicetree.cb b/src/mainboard/digitallogic/msm800sev/devicetree.cb new file mode 100644 index 0000000000..9636dee678 --- /dev/null +++ b/src/mainboard/digitallogic/msm800sev/devicetree.cb @@ -0,0 +1,86 @@ +chip northbridge/amd/lx + device pci_domain 0 on + device pci 1.0 on end + device pci 1.1 on end + chip southbridge/amd/cs5536 + # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK + # SIRQ Mode = Active(Quiet) mode. Save power.... + # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK + # How to get these? Boot linux and do this: + # rdmsr 0x51400025 + register "lpc_serirq_enable" = "0x0000105a" + # rdmsr 0x5140004e -- polairy is high 16 bits of low 32 bits + register "lpc_serirq_polarity" = "0x0000EFA5" + # mode is high 10 bits (determined from code) + register "lpc_serirq_mode" = "1" + # Don't yet know how to find this. + register "enable_gpio_int_route" = "0x0D0C0700" + register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash + register "enable_USBP4_device" = "0" #0: host, 1:device + register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) + register "com1_enable" = "0" + register "com1_address" = "0x3F8" + register "com1_irq" = "4" + register "com2_enable" = "0" + register "com2_address" = "0x2F8" + register "com2_irq" = "3" + register "unwanted_vpci[0]" = "0" # End of list has a zero + device pci f.0 on # ISA Bridge + chip superio/winbond/w83627hf + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci f.1 on end # Flash controller + device pci f.2 on end # IDE controller + device pci f.3 on end # Audio + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + end + end + + # APIC cluster is late CPU init. + device apic_cluster 0 on + chip cpu/amd/model_lx + device apic 0 on end + end + end + +end + diff --git a/src/mainboard/eaglelion/5bcm/devicetree.cb b/src/mainboard/eaglelion/5bcm/devicetree.cb new file mode 100644 index 0000000000..2e0c8161fc --- /dev/null +++ b/src/mainboard/eaglelion/5bcm/devicetree.cb @@ -0,0 +1,54 @@ +chip northbridge/amd/gx1 + device pci_domain 0 on + device pci 0.0 on end + chip southbridge/amd/cs5530 + device pci 12.0 on + chip superio/nsc/pc97317 + device pnp 2e.0 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.1 on # Mouse + irq 0x70 = 12 + end + device pnp 2e.2 on # RTC + io 0x60 = 0x70 + irq 0x70 = 8 + end + device pnp 2e.3 off # FDC + end + device pnp 2e.4 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.5 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.6 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.7 on # GPIO + io 0x60 = 0xe0 + end + device pnp 2e.8 on # Power Management + io 0x60 = 0xe800 + end + register "com1" = "{115200}" + register "com2" = "{38400}" + end + device pci 12.1 off end # SMI + device pci 12.2 on end # IDE + device pci 12.3 off end # Audio + device pci 12.4 off end # VGA + end + end + end + + chip cpu/amd/model_gx1 + end + +end + diff --git a/src/mainboard/eaglelion/Kconfig b/src/mainboard/eaglelion/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/eaglelion/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/embeddedplanet/Kconfig b/src/mainboard/embeddedplanet/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/embeddedplanet/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/embeddedplanet/ep405pc/devicetree.cb b/src/mainboard/embeddedplanet/ep405pc/devicetree.cb new file mode 100644 index 0000000000..b6f5329f53 --- /dev/null +++ b/src/mainboard/embeddedplanet/ep405pc/devicetree.cb @@ -0,0 +1,17 @@ +chip cpu/ppc/ppc4xx + device pci_domain 0 on + device pci 0.0 on end + chip southbridge/winbond/w83c553 + device pci 9.0 on end # ISA bridge + device pci 9.1 on end # IDE contoller + end + device pci e.0 on end + end +end + +## +## Build the objects we have code for in this directory. +## + +addaction coreboot.a "$(CONFIG_CROSS_COMPILE)ranlib coreboot.a" +makedefine CFLAGS += -msoft-float diff --git a/src/mainboard/emulation/Kconfig b/src/mainboard/emulation/Kconfig new file mode 100644 index 0000000000..023adffee6 --- /dev/null +++ b/src/mainboard/emulation/Kconfig @@ -0,0 +1,25 @@ +choice + prompt "Mainboard model" + depends on VENDOR_EMULATION + +config BOARD_EMULATION_QEMU_X86 + bool "QEMU x86" + select ARCH_X86 + select CPU_I586 + select SOUTHBRIDGE_INTEL_I82371EB + select CPU_EMULATION_QEMU_X86 + select CONSOLE_SERIAL8250 + help + x86 QEMU variant. + +endchoice + +config MAINBOARD_DIR + string + default emulation/qemu-x86 + depends on BOARD_EMULATION_QEMU_X86 + +config MAINBOARD_PART_NUMBER + string + default "QEMU-86" + depends on BOARD_EMULATION_QEMU_X86 diff --git a/src/mainboard/emulation/qemu-x86/Makefile.inc b/src/mainboard/emulation/qemu-x86/Makefile.inc new file mode 100644 index 0000000000..1985b2e8b3 --- /dev/null +++ b/src/mainboard/emulation/qemu-x86/Makefile.inc @@ -0,0 +1,21 @@ +initobj-y += crt0.o +crt0-y += ../../../../src/cpu/x86/16bit/entry16.inc +crt0-y += ../../../../src/cpu/x86/32bit/entry32.inc +crt0-y += ../../../../src/cpu/x86/16bit/reset16.inc +crt0-y += ../../../../src/arch/i386/lib/id.inc +crt0-y += auto.inc + +obj-y += mainboard.o + +ldscript-y += ../../../../src/arch/i386/init/ldscript_fallback_cbfs.lb +ldscript-y += ../../../../src/cpu/x86/16bit/entry16.lds +ldscript-y += ../../../../src/cpu/x86/32bit/entry32.lds +ldscript-y += ../../../../src/cpu/x86/16bit/reset16.lds +ldscript-y += ../../../../src/arch/i386/lib/id.lds + +ifdef POST_EVALUATION + +$(obj)/mainboard/$(MAINBOARDDIR)/auto.inc: $(obj)/romcc $(src)/mainboard/$(MAINBOARDDIR)/auto.c $(obj)/option_table.h + $(obj)/romcc -mcpu=i386 -O $(INCLUDES) $(src)/mainboard/$(MAINBOARDDIR)/auto.c -o $@ + +endif diff --git a/src/mainboard/emulation/qemu-x86/devicetree.cb b/src/mainboard/emulation/qemu-x86/devicetree.cb new file mode 100644 index 0000000000..745ff189d1 --- /dev/null +++ b/src/mainboard/emulation/qemu-x86/devicetree.cb @@ -0,0 +1,15 @@ +chip cpu/emulation/qemu-x86 + device pci_domain 0 on + device pci 0.0 on end + + chip southbridge/intel/i82371eb # southbridge + device pci 01.0 on end + device pci 01.1 on end + register "ide0_enable" = "1" + register "ide1_enable" = "1" + end + +# register "com1" = "{1}" +# register "com1" = "{1, 0, 0x3f8, 4}" + end +end diff --git a/src/mainboard/gigabyte/Kconfig b/src/mainboard/gigabyte/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/gigabyte/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/gigabyte/ga-6bxc/devicetree.cb b/src/mainboard/gigabyte/ga-6bxc/devicetree.cb new file mode 100644 index 0000000000..d75ae19da9 --- /dev/null +++ b/src/mainboard/gigabyte/ga-6bxc/devicetree.cb @@ -0,0 +1,57 @@ +chip northbridge/intel/i440bx # Northbridge + device apic_cluster 0 on # APIC cluster + chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually) + device apic 0 on end # APIC + end + end + device pci_domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 7.0 on # ISA bridge + chip superio/ite/it8671f # Super I/O + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.2 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.4 on # APC + end + device pnp 3f0.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 3f0.6 on # PS/2 mouse + irq 0x70 = 12 + end + device pnp 3f0.7 on # GPIO + end + end + end + device pci 7.1 on end # IDE + device pci 7.2 on end # USB + device pci 7.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end +end diff --git a/src/mainboard/gigabyte/ga_2761gxdk/devicetree.cb b/src/mainboard/gigabyte/ga_2761gxdk/devicetree.cb new file mode 100644 index 0000000000..b7cc72f293 --- /dev/null +++ b/src/mainboard/gigabyte/ga_2761gxdk/devicetree.cb @@ -0,0 +1,106 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_AM2 + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 #mc0 + device pci 18.0 on + # devices on link 0, link 0 == LDT 0 + chip southbridge/sis/sis966 + device pci 0.0 on end # Northbridge + device pci 1.0 on # AGP bridge + chip drivers/pci/onboard # Integrated VGA + device pci 0.0 on end + register "rom_address" = "0xfff80000" + end + end + device pci 2.0 on # LPC + chip superio/ite/it8716f + device pnp 2e.0 off # Floppy (N/A) + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 (N/A) + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 off # Parallel port (N/A) + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # EC + io 0x60 = 0x290 + io 0x62 = 0x230 + irq 0x70 = 9 + end + device pnp 2e.5 off # PS/2 keyboard (N/A) + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 off # Mouse (N/A) + irq 0x70 = 12 + end + device pnp 2e.8 off # MIDI (N/A) + io 0x60 = 0x300 + irq 0x70 = 10 + end + device pnp 2e.9 off # GAME (N/A) + io 0x60 = 0x220 + end + device pnp 2e.a off end # CIR (N/A) + end + end + + device pci 2.5 off end # IDE (SiS5513) + device pci 2.6 off end # Modem (SiS7013) + device pci 2.7 off end # Audio (SiS7012) + device pci 3.0 on end # USB (SiS7001,USB1.1) + device pci 3.1 on end # USB (SiS7001,USB1.1) + device pci 3.3 on end # USB (SiS7002,USB2.0) + device pci 4.0 on end # NIC (SiS191) + device pci 5.0 on end # SATA (SiS1183,Native Mode) + device pci 6.0 on end # PCI-e x1 + device pci 7.0 on end # PCI-e x1 + device pci a.0 off end + device pci b.0 off end + device pci c.0 off end + device pci d.0 off end + device pci e.0 off end + device pci f.0 off end # HD Audio (SiS7502) + + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + end + end # device pci 18.0 + device pci 18.0 on end # Link 1 + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end # mc0 + + end # PCI domain + +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 on end # pci_regs_all +# device pnp 0.2 off end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 off end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# device pnp 0.8 off end # io +# device pnp 0.9 off end # io +# end +end #root_complex diff --git a/src/mainboard/gigabyte/m57sli/devicetree.cb b/src/mainboard/gigabyte/m57sli/devicetree.cb new file mode 100644 index 0000000000..60692d664a --- /dev/null +++ b/src/mainboard/gigabyte/m57sli/devicetree.cb @@ -0,0 +1,202 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_AM2 + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 #mc0 + device pci 18.0 on + # devices on link 0, link 0 == LDT 0 + chip southbridge/nvidia/mcp55 + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/ite/it8716f + # Floppy and any LDN + device pnp 2e.0 off + # Watchdog from CLKIN, CLKIN = 24 MHz + irq 0x23 = 0x11 + # Serial Flash (SPI only) + #0x24 = 0x1a + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # EC + io 0x60 = 0x290 + io 0x62 = 0x230 + irq 0x70 = 9 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # Mouse + irq 0x70 = 12 + end + device pnp 2e.7 on # GPIO, SPI flash + # pin 84 is not GP10 + irq 0x25 = 0x0 + # pin 21 is GP26, pin 26 is GP21, pin 27 is GP20 + irq 0x26 = 0x43 + # pin 13 is GP35 + irq 0x27 = 0x20 + # pin 70 is not GP46 + #irq 0x28 = 0x0 + # pin 6,3,128,127,126 is GP63,64,65,66,67 + irq 0x29 = 0x81 + # Enable FAN_CTL/FAN_TAC set to 5 (pin 21,23), enable FAN_CTL/FAN_TAC set to 4 (pin 20,22), pin 48 is PCIRST5#, pin91 is PCIRSTIN#, VIN7 is internal voltage divider for VCCH5V, pin 95 is ATXPG, VIN3 is internal voltage divider for VCC5V + #irq 0x2c = 0x1f + # Simple I/O base + io 0x62 = 0x800 + # Serial Flash I/O (SPI only) + io 0x64 = 0x820 + # watch dog force timeout (parallel flash only) + #irq 0x71 = 0x1 + # No WDT interrupt + irq 0x72 = 0x0 + # GPIO pin set 1 disable internal pullup + irq 0xb8 = 0x0 + # GPIO pin set 5 enable internal pullup + irq 0xbc = 0x01 + # SIO pin set 1 alternate function + #irq 0xc0 = 0x0 + # SIO pin set 2 mixed function + irq 0xc1 = 0x43 + # SIO pin set 3 mixed function + irq 0xc2 = 0x20 + # SIO pin set 4 alternate function + #irq 0xc3 = 0x0 + # SIO pin set 1 input mode + #irq 0xc8 = 0x0 + # SIO pin set 2 input mode + irq 0xc9 = 0x0 + # SIO pin set 4 input mode + #irq 0xcb = 0x0 + # Generate SMI# on EC IRQ + #irq 0xf0 = 0x10 + # SMI# level trigger + #irq 0xf1 = 0x40 + # HWMON alert beep pin location + irq 0xf6 = 0x28 + end + device pnp 2e.8 off # MIDI + io 0x60 = 0x300 + irq 0x70 = 10 + end + device pnp 2e.9 off # GAME + io 0x60 = 0x220 + end + device pnp 2e.a off end # CIR + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 57 on end + end + end # SM +#WTF?!? We already have device pci 1.1 in the section above + device pci 1.1 on # SM 1 +#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus? +# chip drivers/generic/generic #PCIXA Slot1 +# device i2c 50 on end +# end +# chip drivers/generic/generic #PCIXB Slot1 +# device i2c 51 on end +# end +# chip drivers/generic/generic #PCIXB Slot2 +# device i2c 52 on end +# end +# chip drivers/generic/generic #PCI Slot1 +# device i2c 53 on end +# end +# chip drivers/generic/generic #Master MCP55 PCI-E +# device i2c 54 on end +# end +# chip drivers/generic/generic #Slave MCP55 PCI-E +# device i2c 55 on end +# end + chip drivers/generic/generic #MAC EEPROM + device i2c 51 on end + end + + end # SM + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on end # PCI + device pci 6.1 on end # AZA + device pci 8.0 on end # NIC + device pci 9.0 off end # NIC + device pci a.0 on end # PCI E 5 + device pci b.0 on end # PCI E 4 + device pci c.0 on end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 on end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_addr" = "0x51" + end + end # device pci 18.0 + device pci 18.0 on end # Link 1 + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end # mc0 + + end # PCI domain + +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 on end # pci_regs_all +# device pnp 0.2 on end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 on end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# device pnp 0.8 off end # io +# device pnp 0.9 off end # io +# end +end #root_complex diff --git a/src/mainboard/hp/Kconfig b/src/mainboard/hp/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/hp/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/hp/dl145_g3/devicetree.cb b/src/mainboard/hp/dl145_g3/devicetree.cb new file mode 100644 index 0000000000..0d038d333e --- /dev/null +++ b/src/mainboard/hp/dl145_g3/devicetree.cb @@ -0,0 +1,96 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_F + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 # northbridge + device pci 18.0 on # devices on link 0 + chip southbridge/broadcom/bcm21000 # HT2100 + device pci 0.0 on + end # bridge to slot PCI-E 4x ?? + device pci 1.0 on + end + device pci 2.0 on + end # unused + device pci 3.0 on # bridge to slot PCI-E 16x ?? + end + device pci 4.0 on + end # unused + device pci 5.0 on + device pci 4.0 on end # BCM5715 NIC + device pci 4.1 on end # BCM5715 NIC + end + end + chip southbridge/broadcom/bcm5785 # HT1000 + device pci 0.0 on # HT PXB 0x0036 + device pci d.0 on end # PCI/PCI-X bridge 0x0104 + device pci e.0 on end # SATA 0x024a + end + device pci 1.0 on end # Legacy pci main 0x0205 + device pci 1.1 on end # IDE 0x0214 + device pci 1.2 on # LPC 0x0234 + chip superio/nsc/pc87417 + device pnp 4e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 4e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 4e.2 off # Com 2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 4e.3 off # Com 1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.4 off end # SWC + device pnp 4e.5 off end # Mouse + device pnp 4e.6 off # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 4e.7 off end # GPIO + device pnp 4e.f off end # XBUS + device pnp 4e.10 on #RTC + io 0x60 = 0x70 + io 0x62 = 0x72 + end + end # end superio + end # end pci 1.2 + device pci 1.3 off end # WDTimer 0x0238 + device pci 1.4 on end # XIOAPIC0 0x0235 + device pci 1.5 on end # XIOAPIC1 + device pci 1.6 on end # XIOAPIC2 + device pci 2.0 on end # USB 0x0223 + device pci 2.1 on end # USB + device pci 2.2 on end # USB + device pci 3.0 on end # VGA + + #bx_a013+ start + #chip drivers/pci/onboard #SATA2 + # device pci 5.0 on end + # device pci 5.1 on end + # device pci 5.2 on end + # device pci 5.3 on end + #end + #bx_a013+ end + end + end + device pci 18.0 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end # amdk8 + + end #pci_domain +end + + diff --git a/src/mainboard/ibm/Kconfig b/src/mainboard/ibm/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/ibm/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/ibm/e325/devicetree.cb b/src/mainboard/ibm/e325/devicetree.cb new file mode 100644 index 0000000000..4db7c0005e --- /dev/null +++ b/src/mainboard/ibm/e325/devicetree.cb @@ -0,0 +1,81 @@ +chip northbridge/amd/amdk8/root_complex + device pci_domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on end # LDT 0 + device pci 18.0 on # LDT 1 + chip southbridge/amd/amd8131 + device pci 0.0 on end + device pci 0.1 on end + device pci 1.0 on end + device pci 1.1 on end + end + chip southbridge/amd/amd8111 + device pci 0.0 on + device pci 0.0 on end + device pci 0.1 on end + device pci 0.2 on end + device pci 1.0 off end + end + device pci 1.0 on + chip superio/nsc/pc87366 + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 off # Com 2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Com 1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.4 off end # SWC + device pnp 2e.5 off end # Mouse + device pnp 2e.6 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.7 off end # GPIO + device pnp 2e.8 off end # ACB + device pnp 2e.9 off end # FSCM + device pnp 2e.a off end # WDT + end + end + device pci 1.1 on end + device pci 1.2 on end + device pci 1.3 on end + device pci 1.5 off end + device pci 1.6 off end + end + end # device pci 18.0 + device pci 18.0 on end # LDT2 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + chip northbridge/amd/amdk8 + device pci 19.0 on end + device pci 19.0 on end + device pci 19.0 on end + device pci 19.1 on end + device pci 19.2 on end + device pci 19.3 on end + end + end + device apic_cluster 0 on + chip cpu/amd/socket_940 + device apic 0 on end + end + chip cpu/amd/socket_940 + device apic 1 on end + end + end +end + diff --git a/src/mainboard/ibm/e326/devicetree.cb b/src/mainboard/ibm/e326/devicetree.cb new file mode 100644 index 0000000000..11c57e87a3 --- /dev/null +++ b/src/mainboard/ibm/e326/devicetree.cb @@ -0,0 +1,77 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_940 + device apic 0 on end + end + end + + device pci_domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on end # LDT 0 + device pci 18.0 on # LDT 1 + chip southbridge/amd/amd8131 + device pci 0.0 on end + device pci 0.1 on end + device pci 1.0 on end + device pci 1.1 on end + end + chip southbridge/amd/amd8111 + device pci 0.0 on + device pci 0.0 on end + device pci 0.1 on end + device pci 0.2 on end + device pci 1.0 off end + chip drivers/pci/onboard + device pci 5.0 on end # ATI Rage XL + register "rom_address" = "0xfff80000" + end + end + device pci 1.0 on + chip superio/nsc/pc87366 + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 off # Com 2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Com 1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.4 off end # SWC + device pnp 2e.5 off end # Mouse + device pnp 2e.6 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.7 off end # GPIO + device pnp 2e.8 off end # ACB + device pnp 2e.9 off end # FSCM + device pnp 2e.a off end # WDT + end + end + device pci 1.1 on end + device pci 1.2 on end + device pci 1.3 on end + device pci 1.5 off end + device pci 1.6 off end + register "ide0_enable" = "1" + register "ide1_enable" = "1" + end + end # device pci 18.0 + device pci 18.0 on end # LDT2 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end + diff --git a/src/mainboard/iei/Kconfig b/src/mainboard/iei/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/iei/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/iei/juki-511p/devicetree.cb b/src/mainboard/iei/juki-511p/devicetree.cb new file mode 100644 index 0000000000..486fbd5131 --- /dev/null +++ b/src/mainboard/iei/juki-511p/devicetree.cb @@ -0,0 +1,59 @@ +chip northbridge/amd/gx1 + device pci_domain 0 on + device pci 0.0 on end + chip southbridge/amd/cs5530 + + device pci 12.0 on + chip superio/winbond/w83977f + device pnp 3f0.0 on # FDC + irq 0x70 = 6 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + register "com1" = "{115200}" + device pnp 3f0.3 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + register "com2" = "{115200}" + device pnp 3f0.4 on # RTC + io 0x60 = 0x070 + irq 0x70 = 8 + end + device pnp 3f0.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # Int 1 for PS/2 keyboard + irq 0x72 = 12 # Int 12 for PS/2 mouse + end + device pnp 3f0.6 off # IR + end + device pnp 3f0.7 off # GPIO1 + end + device pnp 3f0.8 off # GPIO + end + end + device pci 12.1 on end # SMI + device pci 12.2 on end # IDE + device pci 12.3 on end # Audio + device pci 12.4 on end # VGA onboard + + end + + device pci 0e.0 on end # ETH0 + device pci 13.0 on end # USB + + end + end + + chip cpu/amd/model_gx1 + end + +end + diff --git a/src/mainboard/iei/nova4899r/devicetree.cb b/src/mainboard/iei/nova4899r/devicetree.cb new file mode 100644 index 0000000000..f26db4258a --- /dev/null +++ b/src/mainboard/iei/nova4899r/devicetree.cb @@ -0,0 +1,66 @@ +chip northbridge/amd/gx1 + device pci_domain 0 on + device pci 0.0 on end + chip southbridge/amd/cs5530 + device pci 0a.0 on end # ETH0 + device pci 0b.0 off end # ETH1 + device pci 0c.0 on end # ETH2 + device pci 0f.0 on end # PCI slot + device pci 12.0 on + chip superio/winbond/w83977tf + device pnp 2e.0 on # FDC + irq 0x70 = 6 + end + device pnp 2e.1 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + register "com1" = "{115200}" + device pnp 2e.3 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + register "com2" = "{115200}" + device pnp 2e.4 off # Reserved + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 0x01 # Int 1 for PS/2 keyboard + irq 0x72 = 0x0c # Int 12 for PS/2 mouse + end + device pnp 2e.6 on # IR + io 0x60 = 0x2e8 + irq 0x70 = 3 + end + device pnp 2e.7 on # GAME/MIDI/GPIO1 + io 0x60 = 0x290 + end + device pnp 2e.8 on # GPIO2 + io 0x60 = 0x110 + end + device pnp 2e.9 on # GPIO3 + io 0x60 = 0x120 + end + device pnp 2e.A on # Power Management + io 0x60 = 0xe800 + end + end + device pci 12.1 on end # SMI + device pci 12.2 on end # IDE + device pci 12.3 on end # Audio + device pci 12.4 on end # VGA onboard + end + device pci 13.0 on end # USB + end + end + + chip cpu/amd/model_gx1 + end + +end + diff --git a/src/mainboard/iei/pcisa-lx-800-r10/devicetree.cb b/src/mainboard/iei/pcisa-lx-800-r10/devicetree.cb new file mode 100644 index 0000000000..59a48757e7 --- /dev/null +++ b/src/mainboard/iei/pcisa-lx-800-r10/devicetree.cb @@ -0,0 +1,76 @@ +chip northbridge/amd/lx + device pci_domain 0 on + device pci 1.0 on end # Northbridge + device pci 1.1 on end # Graphics + chip southbridge/amd/cs5536 + # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK + # SIRQ Mode = Active(Quiet) mode. Save power.... + # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse, UARTs, etc IRQs. OK + register "lpc_serirq_enable" = "0x0000105a" + register "lpc_serirq_polarity" = "0x0000EFA5" + register "lpc_serirq_mode" = "1" + register "enable_gpio_int_route" = "0x0D0C0700" + register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash + register "enable_USBP4_device" = "1" # 0: host, 1:device + register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) + register "com1_enable" = "0" + register "com1_address" = "0x3F8" + register "com1_irq" = "4" + register "com2_enable" = "0" + register "com2_address" = "0x2F8" + register "com2_irq" = "3" + register "unwanted_vpci[0]" = "0" # End of list has a zero + device pci 9.0 on end # Slot1 + device pci a.0 on end # Slot2 + device pci b.0 on end # Slot3 + device pci c.0 on end # Slot4 + device pci e.0 on end # Ethernet 0 + device pci 10.0 on end # Ethernet 1 + device pci 11.0 on end # SATA + device pci f.0 on # ISA Bridge + chip superio/winbond/w83627hf + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off end # CIR + device pnp 2e.7 off end # GAME_MIDI_GIPO1 + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b off end # HW Monitor + end + end + device pci f.2 on end # IDE Controller + device pci f.3 on end # Audio + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + end + end + # APIC cluster is late CPU init. + device apic_cluster 0 on + chip cpu/amd/model_lx + device apic 0 on end + end + end +end + diff --git a/src/mainboard/intel/Kconfig b/src/mainboard/intel/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/intel/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/intel/jarrell/devicetree.cb b/src/mainboard/intel/jarrell/devicetree.cb new file mode 100644 index 0000000000..e4cdbdeacb --- /dev/null +++ b/src/mainboard/intel/jarrell/devicetree.cb @@ -0,0 +1,79 @@ +chip northbridge/intel/e7520 + device pci_domain 0 on + device pci 00.0 on end + device pci 00.1 on end + device pci 01.0 on end + device pci 02.0 on + chip southbridge/intel/pxhd # pxhd1 + device pci 00.0 on end + device pci 00.1 on end + device pci 00.2 on + chip drivers/generic/generic + device pci 04.0 on end + device pci 04.1 on end + end + end + device pci 00.3 on end + end + end + device pci 06.0 on end + chip southbridge/intel/i82801er # i82801er + device pci 1d.0 on end + device pci 1d.1 on end + device pci 1d.2 on end + device pci 1d.3 off end + device pci 1d.7 on end + device pci 1e.0 on + chip drivers/ati/ragexl + device pci 0c.0 on end + end + end + device pci 1f.0 on + chip superio/nsc/pc87427 + device pnp 2e.0 off end + device pnp 2e.2 on +# io 0x60 = 0x2f8 +# irq 0x70 = 3 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on +# io 0x60 = 0x3f8 +# irq 0x70 = 4 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.4 off end + device pnp 2e.5 off end + device pnp 2e.6 on + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.7 off end + device pnp 2e.9 off end + device pnp 2e.a off end + device pnp 2e.f on end + device pnp 2e.10 off end + device pnp 2e.14 off end + end + end + device pci 1f.1 on end + device pci 1f.2 off end + device pci 1f.3 on end + device pci 1f.5 off end + device pci 1f.6 off end + register "gpio[40]" = "ICH5R_GPIO_USE_AS_GPIO" + register "gpio[48]" = "ICH5R_GPIO_USE_AS_GPIO | ICH5R_GPIO_SEL_OUTPUT | ICH5R_GPIO_LVL_LOW" + register "gpio[41]" = "ICH5R_GPIO_USE_AS_GPIO | ICH5R_GPIO_SEL_INPUT" + end + end + device apic_cluster 0 on + chip cpu/intel/socket_mPGA604 # cpu 0 + device apic 0 on end + end + chip cpu/intel/socket_mPGA604 # cpu 1 + device apic 6 on end + end + end +end diff --git a/src/mainboard/intel/mtarvon/devicetree.cb b/src/mainboard/intel/mtarvon/devicetree.cb new file mode 100644 index 0000000000..1a11859b09 --- /dev/null +++ b/src/mainboard/intel/mtarvon/devicetree.cb @@ -0,0 +1,44 @@ +chip northbridge/intel/i3100 + device pci_domain 0 on + device pci 00.0 on end # IMCH + device pci 00.1 on end # IMCH error status + device pci 01.0 on end # IMCH EDMA engine + device pci 02.0 on end # PCIe port A/A0 + device pci 03.0 on end # PCIe port A1 + chip southbridge/intel/i3100 + # PIRQ line -> legacy IRQ mappings + register "pirq_a_d" = "0x0b070a05" + register "pirq_e_h" = "0x0a808080" + + device pci 1c.0 on end # PCIe port B0 + device pci 1c.1 on end # PCIe port B1 + device pci 1c.2 on end # PCIe port B2 + device pci 1c.3 on end # PCIe port B3 + device pci 1d.0 on end # USB (UHCI) 1 + device pci 1d.1 on end # USB (UHCI) 2 + device pci 1d.7 on end # USB (EHCI) + device pci 1e.0 on end # PCI bridge + device pci 1e.2 on end # audio + device pci 1e.3 on end # modem + device pci 1f.0 on # LPC bridge + chip superio/intel/i3100 + device pnp 4e.4 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.5 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + end + end + device pci 1f.2 on end # SATA + device pci 1f.3 on end # SMBus + end + end + device apic_cluster 0 on + chip cpu/intel/socket_mPGA479M + device apic 0 on end + end + end +end diff --git a/src/mainboard/intel/truxton/devicetree.cb b/src/mainboard/intel/truxton/devicetree.cb new file mode 100644 index 0000000000..7604beafe5 --- /dev/null +++ b/src/mainboard/intel/truxton/devicetree.cb @@ -0,0 +1,41 @@ +chip northbridge/intel/i3100 + device pci_domain 0 on + device pci 00.0 on end # IMCH + device pci 00.1 on end # IMCH error status + device pci 01.0 on end # IMCH EDMA engine + device pci 02.0 on end # PCIe port A/A0 + device pci 03.0 on end # PCIe port A1 + device pci 04.0 on end # ? + device pci 08.0 off end # must be off to boot + device pci 0d.0 off end # must be off to boot + device pci 0d.1 off end # must be off to boot + chip southbridge/intel/i3100 + # PIRQ line -> legacy IRQ mappings + register "pirq_a_d" = "0x0b070a05" + register "pirq_e_h" = "0x0a808080" + + device pci 1d.0 on end # USB (UHCI) + device pci 1d.7 on end # USB (EHCI) + device pci 1f.0 on # LPC bridge + chip superio/intel/i3100 + device pnp 4e.4 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.5 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + end + end + device pci 1f.2 on end # SATA + device pci 1f.3 on end # SMBus + device pci 1f.4 on end # ? + end + end + device apic_cluster 0 on + chip cpu/intel/ep80579 + device apic 0 on end + end + end +end diff --git a/src/mainboard/intel/xe7501devkit/devicetree.cb b/src/mainboard/intel/xe7501devkit/devicetree.cb new file mode 100644 index 0000000000..68d2b977eb --- /dev/null +++ b/src/mainboard/intel/xe7501devkit/devicetree.cb @@ -0,0 +1,75 @@ +chip northbridge/intel/e7501 + device pci_domain 0 on + device pci 0.0 on end # Chipset host controller + device pci 0.1 on end # Host RASUM controller + device pci 2.0 on # Hub interface B + chip southbridge/intel/i82870 # P64H2 + device pci 1c.0 on end # IOAPIC - bus B + device pci 1d.0 on end # Hub to PCI-B bridge + device pci 1e.0 on end # IOAPIC - bus A + device pci 1f.0 on end # Hub to PCI-A bridge + end + end + device pci 3.0 off end # Hub interface C (82808AA connector - disable for now) + device pci 4.0 on # Hub interface D + chip southbridge/intel/i82870 # P64H2 + device pci 1c.0 on end # IOAPIC - bus B + device pci 1d.0 on end # Hub to PCI-B bridge + device pci 1e.0 on end # IOAPIC - bus A + device pci 1f.0 on end # Hub to PCI-A bridge + end + end + device pci 6.0 on end # E7501 Power management registers? (undocumented) + chip southbridge/intel/i82801ca + device pci 1d.0 off end # USB (might not work, Southbridge code needs looking at) + device pci 1d.1 off end # USB (not populated) + device pci 1d.2 off end # USB (not populated) + device pci 1e.0 on # Hub to PCI bridge + chip drivers/pci/onboard # VGA ROM + device pci 0.0 on end + register "rom_address" = "_vgarom_start" + end + end + device pci 1f.0 on # LPC bridge + chip superio/smsc/lpc47b272 + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.3 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.5 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.7 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # Keyboard interrupt + irq 0x72 = 12 # Mouse interrupt + end + device pnp 2e.a off end # ACPI + end + end + device pci 1f.1 on end # IDE + device pci 1f.3 on end # SMBus + device pci 1f.5 off end # AC97 Audio + device pci 1f.6 off end # AC97 Modem + end # SB + end # PCI_DOMAIN + device apic_cluster 0 on + chip cpu/intel/socket_mPGA604 + device apic 0 on end + end + chip cpu/intel/socket_mPGA604 + device apic 6 on end + end + end +end diff --git a/src/mainboard/iwill/Kconfig b/src/mainboard/iwill/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/iwill/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/iwill/dk8_htx/devicetree.cb b/src/mainboard/iwill/dk8_htx/devicetree.cb new file mode 100644 index 0000000000..0d02cc8b59 --- /dev/null +++ b/src/mainboard/iwill/dk8_htx/devicetree.cb @@ -0,0 +1,133 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_940 + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on end + device pci 18.0 on end + device pci 18.0 on # northbridge + chip southbridge/amd/amd8131 + # the on/off keyword is mandatory + device pci 0.0 on end + device pci 0.1 on end + device pci 1.0 on end + device pci 1.1 on end + end + chip southbridge/amd/amd8111 + # this "device pci 0.0" is the parent the next one + # PCI bridge + device pci 0.0 on + device pci 0.0 on end + device pci 0.1 on end + device pci 0.2 off end + device pci 1.0 off end + #chip drivers/pci/onboard + # device pci 6.0 on end + # register "rom_address" = "0xfff80000" + #end + end + device pci 1.0 on + chip superio/winbond/w83627hf + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 on # GPIO2 + io 0x07 = 0x08ff + io 0x30 = 0x01ff + io 0x2b = 0xd0ff + io 0xf0 = 0xef16 + end + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on end + device pci 1.2 on end + device pci 1.3 on + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 57 on end + end + end # acpi + device pci 1.5 off end + device pci 1.6 off end + register "ide0_enable" = "1" + register "ide1_enable" = "1" + end + end # device pci 18.0 + + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + + end #pci_domain +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 on end # pci_regs_all +# device pnp 0.2 off end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 off end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# end + +end + + diff --git a/src/mainboard/iwill/dk8s2/devicetree.cb b/src/mainboard/iwill/dk8s2/devicetree.cb new file mode 100644 index 0000000000..5c389f26ff --- /dev/null +++ b/src/mainboard/iwill/dk8s2/devicetree.cb @@ -0,0 +1,89 @@ +chip northbridge/amd/amdk8/root_complex + device pci_domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on # LDT 0 + chip southbridge/amd/amd8131 + device pci 0.0 on end + device pci 0.1 on end + device pci 1.0 on end + device pci 1.1 on end + end + chip southbridge/amd/amd8111 + # this "device pci 0.0" is the parent the next one + # PCI bridge + device pci 0.0 on + device pci 0.0 on end + device pci 0.1 on end + device pci 0.2 on end + device pci 1.0 off end + end + device pci 1.0 on + chip superio/winbond/w83627hf + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off end # CIR + device pnp 2e.7 off end # GAME_MIDI_GIPO1 + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + end + register "com1" = "{1}" + # register "com1" = "{1, 0, 0x3f8, 4}" + # register "lpt" = "{1}" + end + end + device pci 1.1 on end + device pci 1.2 on end + device pci 1.3 on end + device pci 1.5 off end + device pci 1.6 off end + end + end # LDT0 + device pci 18.0 on end # LDT1 + device pci 18.0 on end # LDT2 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + chip northbridge/amd/amdk8 + device pci 19.0 on end + device pci 19.0 on end + device pci 19.0 on end + device pci 19.1 on end + device pci 19.2 on end + device pci 19.3 on end + end + end + device apic_cluster 0 on + chip cpu/amd/socket_940 + device apic 0 on end + end + chip cpu/amd/socket_940 + device apic 1 on end + end + end +end + diff --git a/src/mainboard/iwill/dk8x/devicetree.cb b/src/mainboard/iwill/dk8x/devicetree.cb new file mode 100644 index 0000000000..77c96aa944 --- /dev/null +++ b/src/mainboard/iwill/dk8x/devicetree.cb @@ -0,0 +1,68 @@ +chip northbridge/amd/amdk8/root_complex + device pci_domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on # northbridge + # devices on link 0, link 0 == LDT 0 + chip southbridge/amd/amd8131 + # the on/off keyword is mandatory + device pci 0.0 on end + device pci 0.1 on end + device pci 1.0 on end + device pci 1.1 on end + end + chip southbridge/amd/amd8111 + # this "device pci 0.0" is the parent the next one + # PCI bridge + device pci 0.0 on + device pci 0.0 on end + device pci 0.1 on end + device pci 0.2 on end + device pci 1.0 off end + end + device pci 1.0 on + chip superio/winbond/w83627thf + device pnp 2e.0 on end + device pnp 2e.1 on end + device pnp 2e.2 on end + device pnp 2e.3 on end + device pnp 2e.4 on end + device pnp 2e.5 on end + device pnp 2e.6 on end + device pnp 2e.7 on end + device pnp 2e.8 on end + device pnp 2e.9 on end + device pnp 2e.a on end + end + end + device pci 1.1 on end + device pci 1.2 on end + device pci 1.3 on end + device pci 1.5 off end + device pci 1.6 off end + end + end # LDT0 + device pci 18.0 on end # LDT1 + device pci 18.0 on end # LDT2 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + chip northbridge/amd/amdk8 + device pci 19.0 on end + device pci 19.0 on end + device pci 19.0 on end + device pci 19.1 on end + device pci 19.2 on end + device pci 19.3 on end + end + end + device apic_cluster 0 on + chip cpu/amd/socket_940 + device apic 0 on end + end + chip cpu/amd/socket_940 + device apic 1 on end + end + end +end + diff --git a/src/mainboard/jetway/Kconfig b/src/mainboard/jetway/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/jetway/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/jetway/j7f24/devicetree.cb b/src/mainboard/jetway/j7f24/devicetree.cb new file mode 100644 index 0000000000..4df377bba9 --- /dev/null +++ b/src/mainboard/jetway/j7f24/devicetree.cb @@ -0,0 +1,62 @@ +chip northbridge/via/cn700 # Northbridge + device pci_domain 0 on # PCI domain + device pci 0.0 on end # AGP Bridge + device pci 0.1 on end # Error Reporting + device pci 0.2 on end # Host Bus Control + device pci 0.3 on end # Memory Controller + device pci 0.4 on end # Power Management + device pci 0.7 on end # V-Link Controller + device pci 1.0 on end # PCI Bridge + chip southbridge/via/vt8237r # Southbridge + # Enable both IDE channels. + register "ide0_enable" = "1" + register "ide1_enable" = "1" + # Both cables are 40pin. + register "ide0_80pin_cable" = "0" + register "ide1_80pin_cable" = "0" + register "fn_ctrl_lo" = "0x80" + register "fn_ctrl_hi" = "0x1d" + device pci a.0 on end # Firewire + device pci f.0 on end # SATA + device pci f.1 on end # IDE + device pci 10.0 on end # OHCI + device pci 10.1 on end # OHCI + device pci 10.2 on end # OHCI + device pci 10.3 on end # OHCI + device pci 10.4 on end # EHCI + device pci 11.0 on # Southbridge LPC + chip superio/fintek/f71805f # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.b on # HWM + io 0x60 = 0xec00 + end + end + end + device pci 11.5 on end # AC'97 audio + # device pci 11.6 off end # AC'97 Modem + device pci 12.0 on end # Ethernet + end + end + device apic_cluster 0 on # APIC cluster + chip cpu/via/model_c7 # VIA C7 + device apic 0 on end # APIC + end + end +end diff --git a/src/mainboard/kontron/986lcd-m/Makefile.inc b/src/mainboard/kontron/986lcd-m/Makefile.inc new file mode 100644 index 0000000000..6a021bfca9 --- /dev/null +++ b/src/mainboard/kontron/986lcd-m/Makefile.inc @@ -0,0 +1,77 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or +## modify it under the terms of the GNU General Public License as +## published by the Free Software Foundation; version 2 of +## the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +## MA 02110-1301 USA +## + +## +## This mainboard requires DCACHE_AS_RAM enabled. It won't work without. +## + +driver-y += mainboard.o +driver-y += rtl8168.o + +#obj-y += ../../../southbridge/intel/i82801gx/i82801gx_reset.c +obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o +obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_HAVE_ACPI_TABLES) += fadt.o + +smmobj-$(CONFIG_HAVE_SMI_HANDLER) += mainboard_smi.o + +# This is part of the conversion to init-obj and away from included code. + +initobj-y += crt0.o +# FIXME in $(top)/Makefile +crt0-y += ../../../../src/cpu/x86/16bit/entry16.inc +crt0-y += ../../../../src/cpu/x86/32bit/entry32.inc +crt0-y += ../../../../src/cpu/x86/16bit/reset16.inc +crt0-y += ../../../../src/arch/i386/lib/id.inc +crt0-y += ../../../../src/cpu/intel/model_6ex/cache_as_ram.inc +crt0-y += auto.inc + +ldscript-y += ../../../../src/arch/i386/init/ldscript_fallback_cbfs.lb +ldscript-y += ../../../../src/cpu/x86/16bit/entry16.lds +ldscript-y += ../../../../src/cpu/x86/16bit/reset16.lds +ldscript-y += ../../../../src/arch/i386/lib/id.lds +ldscript-y += ../../../../src/arch/i386/lib/failover.lds + +ifdef POST_EVALUATION + +MAINBOARD_OPTIONS=\ + -DCONFIG_AP_IN_SIPI_WAIT=1 \ + -DCONFIG_USE_PRINTK_IN_CAR=1 \ + -DCONFIG_HAVE_HIGH_TABLES=1 \ + -DCONFIG_MMCONF_SUPPORT=1 \ + -DCONFIG_MMCONF_BASE_ADDRESS=0xf0000000 + +$(obj)/dsdt.c: $(src)/mainboard/$(MAINBOARDDIR)/dsdt.asl + iasl -p dsdt -tc $(src)/mainboard/$(MAINBOARDDIR)/dsdt.asl + mv dsdt.hex $@ + +$(obj)/mainboard/$(MAINBOARDDIR)/dsdt.o: $(obj)/dsdt.c + $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c $< -o $@ + +$(obj)/mainboard/$(MAINBOARDDIR)/auto.inc: $(src)/mainboard/$(MAINBOARDDIR)/auto.c $(obj)/option_table.h + $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c -S $(src)/mainboard/$(MAINBOARDDIR)/auto.c -o $@ + perl -e 's/\.rodata/.rom.data/g' -pi $@ + perl -e 's/\.text/.section .rom.text/g' -pi $@ + +endif + diff --git a/src/mainboard/kontron/986lcd-m/devicetree.cb b/src/mainboard/kontron/986lcd-m/devicetree.cb new file mode 100644 index 0000000000..2a3615bf5d --- /dev/null +++ b/src/mainboard/kontron/986lcd-m/devicetree.cb @@ -0,0 +1,132 @@ +chip northbridge/intel/i945 + + device apic_cluster 0 on + chip cpu/intel/socket_mFCPGA478 + device apic 0 on end + end + end + + device pci_domain 0 on + device pci 00.0 on end # host bridge + device pci 01.0 off end # i945 PCIe root port + chip drivers/pci/onboard + device pci 02.0 on end # vga controller + # register "rom_address" = "0xfffc0000" # 256 KB image + # register "rom_address" = "0xfff80000" # 512 KB image + register "rom_address" = "0xfff00000" # 1 MB image + end + device pci 02.1 on end # display controller + + chip southbridge/intel/i82801gx + register "pirqa_routing" = "0x05" + register "pirqb_routing" = "0x07" + register "pirqc_routing" = "0x05" + register "pirqd_routing" = "0x07" + register "pirqe_routing" = "0x80" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x06" + + # GPI routing + # 0 No effect (default) + # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + # 2 SCI (if corresponding GPIO_EN bit is also set) + register "gpi13_routing" = "1" + + register "ide_legacy_combined" = "0x1" + register "ide_enable_primary" = "0x1" + register "ide_enable_secondary" = "0x1" + register "sata_ahci" = "0x0" + + device pci 1b.0 on end # High Definition Audio + device pci 1c.0 on end # PCIe + device pci 1c.1 on end # PCIe + device pci 1c.2 on end # PCIe + #device pci 1c.3 off end # PCIe port 4 + #device pci 1c.4 off end # PCIe port 5 + #device pci 1c.5 off end # PCIe port 6 + device pci 1d.0 on end # USB UHCI + device pci 1d.1 on end # USB UHCI + device pci 1d.2 on end # USB UHCI + device pci 1d.3 on end # USB UHCI + device pci 1d.7 on end # USB2 EHCI + device pci 1e.0 on end # PCI bridge + #device pci 1e.2 off end # AC'97 Audio + #device pci 1e.3 off end # AC'97 Modem + device pci 1f.0 on # LPC bridge + chip superio/winbond/w83627thg + device pnp 2e.0 off # Floppy + end + device pnp 2e.1 off # Parport + end + device pnp 2e.2 on + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on + io 0x60 = 0x2f8 + irq 0x70 = 3 + irq 0xf1 = 4 # set IRMODE 0 # XXX not an irq + end + device pnp 2e.5 on # Keyboard+Mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + irq 0xf0 = 0x82 # HW accel A20. + end + device pnp 2e.7 on # GPIO1, GAME, MIDI + io 0x62 = 0x330 + irq 0x70 = 9 + end + device pnp 2e.8 on # GPIO2 + # all default + end + device pnp 2e.9 on # GPIO3/4 + irq 0x30 = 0x03 # does this work? + irq 0xf0 = 0xfb # set inputs/outputs + irq 0xf1 = 0x66 + end + device pnp 2e.a off # ACPI + end + device pnp 2e.b on # HWM + io 0x60 = 0xa00 + irq 0x70 = 0 + end + + end + chip superio/winbond/w83627thg + device pnp 4e.0 off # Floppy + end + device pnp 4e.1 off # Parport + end + device pnp 4e.2 on # COM3 + io 0x60 = 0x3e8 + irq 0x70 = 11 + end + device pnp 4e.3 on # COM4 + io 0x60 = 0x2e8 + irq 0x70 = 10 + end + device pnp 4e.5 off # Keyboard + end + device pnp 4e.7 off # GPIO1, GAME, MIDI + end + device pnp 4e.8 off # GPIO2 + end + device pnp 4e.9 off # GPIO3/4 + end + device pnp 4e.a off # ACPI + end + device pnp 4e.b off # HWM + end + end + + end + #device pci 1f.1 off end # IDE + device pci 1f.2 on end # SATA + device pci 1f.3 on end # SMBus + #device pci 1f.4 off end # Realtek ID Codec + end + end +end diff --git a/src/mainboard/kontron/Kconfig b/src/mainboard/kontron/Kconfig new file mode 100644 index 0000000000..4a6a64fddb --- /dev/null +++ b/src/mainboard/kontron/Kconfig @@ -0,0 +1,48 @@ +choice + prompt "Mainboard model" + depends on VENDOR_KONTRON + +config BOARD_KONTRON_986LCD_M + bool "986LCD-M" + select ARCH_X86 + select CPU_INTEL_CORE + select CPU_INTEL_SOCKET_MFCPGA478 + select NORTHBRIDGE_INTEL_I945 + select SOUTHBRIDGE_INTEL_I82801GX + select SUPERIO_WINBOND_W83627THG + select PIRQ_TABLE + select MMCONF_SUPPORT + select USE_PRINTK_IN_CAR + help + Kontron 986LCD-M Series mainboards +endchoice + +config MAINBOARD_DIR + string + default kontron/986lcd-m + depends on BOARD_KONTRON_986LCD_M + +config DCACHE_RAM_BASE + hex + default 0xffdf8000 + depends on BOARD_KONTRON_986LCD_M + +config DCACHE_RAM_SIZE + hex + default 0x8000 + depends on BOARD_KONTRON_986LCD_M + +config LB_CKS_RANGE_END + int + default 122 + depends on BOARD_KONTRON_986LCD_M + +config LB_CKS_LOC + int + default 123 + depends on BOARD_KONTRON_986LCD_M + +config MAINBOARD_PART_NUMBER + string + default "986LCD-M" + depends on BOARD_KONTRON_986LCD_M diff --git a/src/mainboard/lippert/Kconfig b/src/mainboard/lippert/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/lippert/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/lippert/frontrunner/devicetree.cb b/src/mainboard/lippert/frontrunner/devicetree.cb new file mode 100644 index 0000000000..7f16174d60 --- /dev/null +++ b/src/mainboard/lippert/frontrunner/devicetree.cb @@ -0,0 +1,18 @@ +chip northbridge/amd/gx2 + device pci_domain 0 on + device pci 0.0 on end + chip southbridge/amd/cs5535 + device pci 12.0 on + device pci 12.1 off end # SMI + device pci 12.2 on end # IDE + device pci 12.3 off end # Audio + device pci 12.4 off end # VGA + end + end + end + + chip cpu/amd/model_gx2 + end + +end + diff --git a/src/mainboard/lippert/roadrunner-lx/devicetree.cb b/src/mainboard/lippert/roadrunner-lx/devicetree.cb new file mode 100644 index 0000000000..72019728e0 --- /dev/null +++ b/src/mainboard/lippert/roadrunner-lx/devicetree.cb @@ -0,0 +1,89 @@ +chip northbridge/amd/lx + device pci_domain 0 on + device pci 1.0 on end # Northbridge + device pci 1.1 on end # Graphics + device pci 1.2 on end # AES + chip southbridge/amd/cs5536 # Southbridge + # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK + # SIRQ Mode = Active(Quiet) mode. Save power... + # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse, + # UARTs, etc IRQs. OK + register "lpc_serirq_enable" = "0x000012DA" # 00010010 11011010 + register "lpc_serirq_polarity" = "0x0000ED25" # inverse of above + register "lpc_serirq_mode" = "1" + register "enable_gpio_int_route" = "0x0D0C0700" + register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash + register "enable_USBP4_device" = "0" # 0: host, 1:device + register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) + register "com1_enable" = "0" + register "com1_address" = "0x3E8" + register "com1_irq" = "6" + register "com2_enable" = "0" + register "com2_address" = "0x2E8" + register "com2_irq" = "6" + register "unwanted_vpci[0]" = "0" # End of list has a zero + device pci 8.0 on end # Slot4 + device pci 9.0 on end # Slot3 + device pci a.0 on end # Slot2 + device pci b.0 on end # Slot1 + device pci c.0 on end # IT8888 + device pci e.0 on end # Ethernet + device pci f.0 on # ISA bridge + chip superio/ite/it8712f + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # EC + io 0x60 = 0x290 + io 0x62 = 0x230 + irq 0x70 = 9 + end + device pnp 2e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # PS/2 mouse + irq 0x70 = 12 + end + device pnp 2e.7 on # GPIO + io 0x62 = 0x1220 + # io 0x64 = 0x1200 + end + device pnp 2e.8 off # MIDI + io 0x60 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.9 off # Game port + io 0x60 = 0x220 + end + device pnp 2e.a off end # CIR + end + end + device pci f.2 on end # IDE controller + device pci f.3 on end # Audio + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + end + end + # APIC cluster is late CPU init. + device apic_cluster 0 on + chip cpu/amd/model_lx + device apic 0 on end + end + end +end diff --git a/src/mainboard/lippert/spacerunner-lx/devicetree.cb b/src/mainboard/lippert/spacerunner-lx/devicetree.cb new file mode 100644 index 0000000000..f6d5535e88 --- /dev/null +++ b/src/mainboard/lippert/spacerunner-lx/devicetree.cb @@ -0,0 +1,90 @@ +chip northbridge/amd/lx + device pci_domain 0 on + device pci 1.0 on end # Northbridge + device pci 1.1 on end # Graphics + device pci 1.2 on end # AES + chip southbridge/amd/cs5536 + # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK + # SIRQ Mode = Active(Quiet) mode. Save power.... + # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse, + # UARTs, etc IRQs. OK + register "lpc_serirq_enable" = "0x000012DA" # 00010010 11011010 + register "lpc_serirq_polarity" = "0x0000ED25" # inverse of above + register "lpc_serirq_mode" = "1" + register "enable_gpio_int_route" = "0x0D0C0700" + register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash + register "enable_USBP4_device" = "0" # 0:host, 1:device + register "enable_USBP4_overcurrent" = "0" # 0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) + register "com1_enable" = "0" + register "com1_address" = "0x3E8" + register "com1_irq" = "6" + register "com2_enable" = "0" + register "com2_address" = "0x2E8" + register "com2_irq" = "6" + register "unwanted_vpci[0]" = "0x80007B00" # Audio: 1<<31 + Device 0x0F<<11 + Function 3<<8 + register "unwanted_vpci[1]" = "0" # End of list has a zero + device pci 8.0 on end # Slot4 + device pci 9.0 on end # Slot3 + device pci a.0 on end # Slot2 + device pci b.0 on end # Slot1 + device pci c.0 on end # IT8888 + device pci e.0 on end # Ethernet + device pci f.0 on # ISA Bridge + chip superio/ite/it8712f + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # EC + io 0x60 = 0x290 + io 0x62 = 0x230 + irq 0x70 = 9 + end + device pnp 2e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # PS/2 mouse + irq 0x70 = 12 + end + device pnp 2e.7 on # GPIO + io 0x62 = 0x1220 + io 0x64 = 0x1200 + end + device pnp 2e.8 off # MIDI + io 0x60 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.9 off # Game port + io 0x60 = 0x220 + end + device pnp 2e.a off end # CIR + end + end + device pci f.2 on end # IDE + device pci f.3 off end # Audio + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + end + end + # APIC cluster is late CPU init. + device apic_cluster 0 on + chip cpu/amd/model_lx + device apic 0 on end + end + end +end diff --git a/src/mainboard/mitac/Kconfig b/src/mainboard/mitac/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/mitac/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/motorola/Kconfig b/src/mainboard/motorola/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/motorola/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/motorola/sandpoint/devicetree.cb b/src/mainboard/motorola/sandpoint/devicetree.cb new file mode 100644 index 0000000000..5ed46bd3b7 --- /dev/null +++ b/src/mainboard/motorola/sandpoint/devicetree.cb @@ -0,0 +1,30 @@ +## +## Config file for the Motorola Sandpoint III development system. +## Note that this has only been tested with the Altimus 7410 PMC. +## + +## +## Early board initialization, called from ppc_main() +## +initobject init.o +initobject clock.o + +## +## Stage 2 timer support +## +object clock.o + +## +## Set our CONFIG_ARCH +## +arch ppc end + +## +## Build the objects we have code for in this directory. +## + +dir nvram +dir flash + +addaction coreboot.a "$(CONFIG_CROSS_COMPILE)ranlib coreboot.a" +makedefine CFLAGS += -g diff --git a/src/mainboard/motorola/sandpointx3_altimus_mpc7410/devicetree.cb b/src/mainboard/motorola/sandpointx3_altimus_mpc7410/devicetree.cb new file mode 100644 index 0000000000..bc13ca4471 --- /dev/null +++ b/src/mainboard/motorola/sandpointx3_altimus_mpc7410/devicetree.cb @@ -0,0 +1,26 @@ +chip northbridge/motorola/mpc107 + device pci_domain 0 on + device pci 0.0 on end + device pci b.0 on + chip southbridge/winbond/w83c553 + chip superio/nsc/pc97307 + device pnp 15c.0 on end # Kyeboard + device pnp 15c.1 on end # Mouse + device pnp 15c.2 on end # Real-time Clock + device pnp 15c.3 on end # Floppy + device pnp 15c.4 on end # Parallel port + device pnp 15c.5 on end # com2 + device pnp 15c.6 on end # com1 + device pnp 15c.7 on end # gpio + device pnp 15c.8 on end # Power management + end + end + end # pci to isa bridge + device pci b.1 on end # pci ide controller + end + device cpu_bus 0 on + chip cpu/ppc/mpc74xx + device cpu 0 on end + end + end +end diff --git a/src/mainboard/msi/Kconfig b/src/mainboard/msi/Kconfig new file mode 100644 index 0000000000..3a3a38a563 --- /dev/null +++ b/src/mainboard/msi/Kconfig @@ -0,0 +1,41 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +choice + prompt "Mainboard model" + depends on VENDOR_MSI + +config BOARD_MSI_MS6178 + bool "MS-6178" + select ARCH_X86 + select CPU_INTEL_SOCKET_PGA370 + select NORTHBRIDGE_INTEL_I82810 + select SOUTHBRIDGE_INTEL_I82801XX + select SUPERIO_WINBOND_W83627HF + select PIRQ_TABLE + help + MSI MS-6178 mainboard. +endchoice + +config MAINBOARD_DIR + string + default msi/ms6178 + depends on BOARD_MSI_MS6178 + diff --git a/src/mainboard/msi/ms6119/devicetree.cb b/src/mainboard/msi/ms6119/devicetree.cb new file mode 100644 index 0000000000..e5b7bb3a47 --- /dev/null +++ b/src/mainboard/msi/ms6119/devicetree.cb @@ -0,0 +1,60 @@ +chip northbridge/intel/i440bx # Northbridge + device apic_cluster 0 on # APIC cluster + chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually) + device apic 0 on end # APIC + end + end + device pci_domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 7.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.9 on # GPIO 3 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 7.1 on end # IDE + device pci 7.2 on end # USB + device pci 7.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end +end diff --git a/src/mainboard/msi/ms6147/devicetree.cb b/src/mainboard/msi/ms6147/devicetree.cb new file mode 100644 index 0000000000..7eff7f4320 --- /dev/null +++ b/src/mainboard/msi/ms6147/devicetree.cb @@ -0,0 +1,60 @@ +chip northbridge/intel/i440bx # Northbridge + device apic_cluster 0 on # APIC cluster + chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually) + device apic 0 on end # APIC + end + end + device pci_domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 7.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.9 off # GPIO 3 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 7.1 on end # IDE + device pci 7.2 on end # USB + device pci 7.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "1" + register "ide0_drive1_udma33_enable" = "1" + register "ide1_drive0_udma33_enable" = "1" + register "ide1_drive1_udma33_enable" = "1" + end + end +end diff --git a/src/mainboard/msi/ms6178/Makefile.inc b/src/mainboard/msi/ms6178/Makefile.inc new file mode 100644 index 0000000000..bc322d4f0d --- /dev/null +++ b/src/mainboard/msi/ms6178/Makefile.inc @@ -0,0 +1,53 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +driver-y += mainboard.o + +obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o +obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o + +initobj-y += ../../../arch/i386/init/entry.o +initobj-y += ../../../cpu/intel/model_6ex/car.o # FIXME. romcc. +# initobj-y += ../../../arch/i386/init/rombootstrap.o +# initobj-y += ../../../cpu/intel/model_6ex/disable_car.o +initobj-y += ../../../pc80/mc146818rtc_early.o +initobj-y += ../../../arch/i386/lib/console.o +initobj-y += ../../../arch/i386/lib/console_printk.o +# initobj-y += ../../../ram/ramtest.o # FIXME +initobj-y += ../../../southbridge/intel/i82801xx/i82801xx_early_smbus.o +initobj-y += ../../../southbridge/intel/i82801xx/i82801xx_reset.o +initobj-y += ../../../superio/winbond/w83627hf/w83627hf_early_serial.o +initobj-y += ../../../northbridge/intel/i82810/raminit.o + +ifdef POST_EVALUATION + +# FIXME: Drop DCACHE_RAM_BASE/DCACHE_RAM_SIZE, only here to make it build. +MAINBOARD_OPTIONS=\ + -DCONFIG_USE_PRINTK_IN_CAR=1 \ + -DCONFIG_HAVE_HIGH_TABLES=1 \ + -DCONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0 \ + -DCONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0 \ + -DCONFIG_MAINBOARD_VENDOR=\"MSI\" \ + -DCONFIG_MAINBOARD_PART_NUMBER=\"MS-6178\" \ + -DCONFIG_DCACHE_RAM_BASE=0xffdf8000 \ + -DCONFIG_DCACHE_RAM_SIZE=0x8000 + +endif + diff --git a/src/mainboard/msi/ms6178/devicetree.cb b/src/mainboard/msi/ms6178/devicetree.cb new file mode 100644 index 0000000000..94ef95a257 --- /dev/null +++ b/src/mainboard/msi/ms6178/devicetree.cb @@ -0,0 +1,69 @@ +chip northbridge/intel/i82810 # Northbridge + device apic_cluster 0 on # APIC cluster + chip cpu/intel/socket_PGA370 # CPU + device apic 0 on end # APIC + end + end + device pci_domain 0 on + device pci 0.0 on end # Host bridge + device pci 1.0 off # Onboard video + # chip drivers/pci/onboard + # device pci 1.0 on end + # register "rom_address" = "0xfff80000" + # end + end + chip southbridge/intel/i82801xx # Southbridge + register "ide0_enable" = "1" + register "ide1_enable" = "1" + + device pci 1e.0 on end # PCI bridge + device pci 1f.0 on # ISA/LPC bridge + chip superio/winbond/w83627hf # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 (only header on board) + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # PS/2 keyboard/mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # Keyboard interrupt + irq 0x72 = 12 # Mouse interrupt + end + device pnp 2e.6 on end # Consumer IR (TODO) + device pnp 2e.7 on # Game port / MIDI / GPIO 1 + io 0x60 = 0x201 + io 0x62 = 0x330 + irq 0x70 = 9 + end + device pnp 2e.8 on end # GPIO 2 + device pnp 2e.9 on end # GPIO 3 + device pnp 2e.a on end # ACPI + device pnp 2e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1f.1 on end # IDE + device pci 1f.2 on end # USB + device pci 1f.3 on end # SMBus + device pci 1f.5 on end # AC'97 audio + device pci 1f.6 on end # AC'97 modem + end + end +end + diff --git a/src/mainboard/msi/ms7135/devicetree.cb b/src/mainboard/msi/ms7135/devicetree.cb new file mode 100644 index 0000000000..d11bd9e2df --- /dev/null +++ b/src/mainboard/msi/ms7135/devicetree.cb @@ -0,0 +1,76 @@ +chip northbridge/amd/amdk8/root_complex # Root complex + device apic_cluster 0 on # APIC cluster + chip cpu/amd/socket_754 # Socket 754 CPU + device apic 0 on end # APIC + end + end + + device pci_domain 0 on # PCI domain + chip northbridge/amd/amdk8 # mc0 + device pci 18.0 on # Northbridge + # Devices on link 0, link 0 == LDT 0 + chip southbridge/nvidia/ck804 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627thf # Super I/O + device pnp 4e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 4e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 4e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 4e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 4e.7 off end # Game, MIDI, GPIO 1, GPIO 5 + device pnp 4e.8 off end # GPIO 2 + device pnp 4e.9 off end # GPIO 3, GPIO 4 + device pnp 4e.a off end # ACPI + device pnp 4e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 0 + end + end + end + device pci 1.1 on end # SMbus + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # Onboard audio (ACI) + device pci 4.1 off end # Onboard modem (MCI) -- not wired out + device pci 6.0 on end # IDE + device pci 7.0 on end # SATA 1 + device pci 8.0 on end # SATA 0 + device pci 9.0 on end # PCI + device pci a.0 on end # NIC + device pci b.0 off end # PCI E 3 -- not wired out + device pci c.0 off end # PCI E 2 -- not wired out + device pci d.0 on end # PCI E 1 + device pci e.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # register "mac_eeprom_smbus" = "3" + # register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end diff --git a/src/mainboard/msi/ms7260/devicetree.cb b/src/mainboard/msi/ms7260/devicetree.cb new file mode 100644 index 0000000000..38b0338acc --- /dev/null +++ b/src/mainboard/msi/ms7260/devicetree.cb @@ -0,0 +1,157 @@ +chip northbridge/amd/amdk8/root_complex # Root complex + device apic_cluster 0 on # APIC cluster + chip cpu/amd/socket_AM2 # CPU + device apic 0 on end # APIC + end + end + device pci_domain 0 on # PCI domain + chip northbridge/amd/amdk8 # Northbridge / mc0 + device pci 18.0 on + # Devices on link 0, link 0 == LDT 0 + chip southbridge/nvidia/mcp55 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627ehg # Super I/O + device pnp 4e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 4e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 4e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.3 on # Com2 / IrDA + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 4e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard IRQ + irq 0x72 = 12 # PS/2 mouse IRQ + end + device pnp 4e.6 off # Serial flash interface + # io 0x62 = 0x100 + end + device pnp 4e.7 off # GPIO1/6, game port, MIDI port + # io 0x60 = 0x220 # Datasheet: 0x201 + # io 0x62 = 0x300 # Datasheet: 0x330 + # irq 0x70 = 9 + end + device pnp 4e.8 off # WDTO#, PLED + end + device pnp 4e.9 off # GPIO2/3/4/5, SUSLED + end + device pnp 4e.a off # ACPI + end + device pnp 4e.b on # HWM (for lm-sensors) + io 0x60 = 0xa10 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + # TODO: Needed? + # chip drivers/generic/generic # DIMM 1-0-0 + # device i2c 54 on end + # end + # chip drivers/generic/generic # DIMM 1-0-1 + # device i2c 55 on end + # end + # chip drivers/generic/generic # DIMM 1-1-0 + # device i2c 56 on end + # end + # chip drivers/generic/generic # DIMM 1-1-1 + # device i2c 57 on end + # end + end + # TODO: Check if the stuff below is correct / needed. + device pci 1.1 on # SM 1 + # PCI device SMBus address will depend on addon PCI device, + # do we need to scan_smbus_bus? + + # chip drivers/generic/generic # PCIXA Slot1 + # device i2c 50 on end + # end + # chip drivers/generic/generic # PCIXB Slot1 + # device i2c 51 on end + # end + # chip drivers/generic/generic # PCIXB Slot2 + # device i2c 52 on end + # end + # chip drivers/generic/generic # PCI Slot1 + # device i2c 53 on end + # end + # chip drivers/generic/generic # Master MCP55 PCI-E + # device i2c 54 on end + # end + # chip drivers/generic/generic # Slave MCP55 PCI-E + # device i2c 55 on end + # end + chip drivers/generic/generic # MAC EEPROM + device i2c 51 on end + end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 off end # SATA 2 (N/A on this board) + device pci 6.0 on end # PCI + device pci 6.1 on end # AZA (HD Audio) + device pci 8.0 on end # NIC + device pci 9.0 off end # NIC (N/A on this board) + device pci a.0 off end # PCI E 5 (N/A on this board?) + device pci b.0 on end # PCI E 4 + device pci c.0 on end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 on end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # TODO: Check the two lines below. + register "mac_eeprom_smbus" = "3" # 1: SMBus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.0 on end # Link 1 + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end + +# TODO +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 on end # pci_regs_all +# device pnp 0.2 on end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 on end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# device pnp 0.8 off end # io +# device pnp 0.9 off end # io +# end + +end diff --git a/src/mainboard/msi/ms9185/devicetree.cb b/src/mainboard/msi/ms9185/devicetree.cb new file mode 100644 index 0000000000..23f6c8747c --- /dev/null +++ b/src/mainboard/msi/ms9185/devicetree.cb @@ -0,0 +1,120 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_F + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on end + device pci 18.0 on end + device pci 18.0 on # northbridge + # devices on link 0 + chip southbridge/broadcom/bcm5780 # HT2000 + device pci 0.0 on end # PXB 1 0x0130 + device pci 1.0 on # PXB 2 0x0130 + device pci 4.0 on end # GB E 0x1668 vid = 0x14e4 + device pci 4.1 on end # GB E 0x1669 vid = 0x14e4 + end + device pci 2.0 on end # PCI E 1 #0x0132 + device pci 3.0 on end # PCI E 2 + device pci 4.0 on end # PCI E 3 + device pci 5.0 on end # PCI E 4 + end + chip southbridge/broadcom/bcm5785 # HT1000 + device pci 0.0 on # HT PXB 0x0036 + device pci d.0 on end # PPBX 0x0104 + device pci e.0 on end # SATA 0x024a + device pci e.1 on end # SATA 0x024a bx_a001 + device pci e.2 on end # SATA 0x024a bx_a001 + device pci e.3 on end # SATA 0x024a bx_a001 + end + device pci 1.0 on # Legacy pci main 0x0205 + end + device pci 1.1 on end # IDE 0x0214 + device pci 1.2 on # LPC 0x0234 + chip superio/nsc/pc87417 + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 off # Com 2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Com 1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.4 off end # SWC + device pnp 2e.5 off end # Mouse + device pnp 2e.6 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.7 off end # GPIO + device pnp 2e.f off end # XBUS + device pnp 2e.10 on #RTC + io 0x60 = 0x70 + io 0x62 = 0x72 + end + end + end + device pci 1.3 on end # WDTimer 0x0238 + device pci 1.4 on end # XIOAPIC0 0x0235 + device pci 1.5 on end # XIOAPIC1 + device pci 1.6 on end # XIOAPIC2 + device pci 2.0 on end # USB 0x0223 + device pci 2.1 on end # USB + device pci 2.2 on end # USB + #when CONFIG_HT_CHAIN_END_UNITID_BASE (0,1) < CONFIG_HT_CHAIN_UNITID_BASE (6,,,,), + chip drivers/pci/onboard + device pci 3.0 on end # it is in bcm5785_0 bus, but the device id can not be changed even unitid is changed, fake one to get the rom_address + # if CONFIG_HT_CHAIN_END_UNITID_BASE=0, it is 4, if CONFIG_HT_CHAIN_END_UNITID_BASE=1, it is 3 + register "rom_address" = "0xfff80000" + end + #bx_a013+ start + #chip drivers/pci/onboard #SATA2 + # device pci 5.0 on end + # device pci 5.1 on end + # device pci 5.2 on end + # device pci 5.3 on end + #end + #bx_a013+ end + + end + #when CONFIG_HT_CHAIN_END_UNITID_BASE > CONFIG_HT_CHAIN_UNITID_BASE (6, ,,,,) +# chip drivers/pci/onboard +# device pci 0.0 on end # fake, will be disabled +# end +# chip drivers/pci/onboard +# device pci 4.0 on end # it is in bcm5785_0 bus, but the device id can not be changed even unitid is changed +# register "rom_address" = "0xfff80000" +# end + + end # device pci 18.0 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end # amdk8 + end #pci_domain +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 on end # pci_regs_all +# device pnp 0.2 off end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 off end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# end + +end + + diff --git a/src/mainboard/msi/ms9282/devicetree.cb b/src/mainboard/msi/ms9282/devicetree.cb new file mode 100644 index 0000000000..6fd476b10a --- /dev/null +++ b/src/mainboard/msi/ms9282/devicetree.cb @@ -0,0 +1,188 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_F + device apic 0 on end + end + end + + device pci_domain 0 on + chip northbridge/amd/amdk8 #mc0 + device pci 18.0 on # northbridge + # devices on link 0, link 0 == LDT 0 + chip southbridge/nvidia/mcp55 + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627ehg + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # SERIAL_FALSH + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # WDTO_PLED + device pnp 2e.9 off end # GPIO2_GPIO3_GPIO4_GPIO5 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/i2c/i2cmux2 # pca9554 smbus mux + device i2c 70 on #0 pca9554 1 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 0-0-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 57 on end + end + end + device i2c 70 on #0 pca9554 2 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 0-0-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 57 on end + end + end + end + end + device pci 1.1 on # SM 1 + chip drivers/i2c/i2cmux2 # pca9554 smbus mux + device i2c 72 on #pca9554 channle1 + chip drivers/i2c/adm1027 #HWM ADT7476 1 + device i2c 2e on end + end + end + device i2c 72 on #pca9545 channel 2 + chip drivers/i2c/adm1027 #HWM ADT7463 + device i2c 2e on end + end + end + device i2c 72 on end #pca9545 channel 3 + device i2c 72 on #pca9545 channel 4 + chip drivers/i2c/adm1027 #HWM ADT7476 2 + device i2c 2e on end + end + end + end + end + + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on #P2P + chip drivers/pci/onboard + device pci 4.0 on end + register "rom_address" = "0xfff80000" + end + end # P2P + device pci 7.0 on end # reserve + device pci 8.0 on end # MAC0 + device pci 9.0 on end # MAC1 + device pci a.0 on + device pci 0.0 on + chip drivers/pci/onboard + device pci 4.0 on end #pci_E lan1 + device pci 4.1 on end #pci_E lan2 + end + end + end # 0x376 + device pci b.0 on end # PCI E 0x374 + device pci c.0 on end + device pci d.0 on #SAS + chip drivers/pci/onboard + device pci 0.0 on end + end + end # PCI E 1 0x378 + device pci e.0 on end # PCI E 0 0x375 + device pci f.0 on end #PCI E 0x377 pci_E slot + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + end + end # device pci 18.0 + device pci 18.0 on end # Link 1 + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end #mc0 + + end # pci_domain + +# chip drivers/generic/debug +# device pnp 0.0 off end +# device pnp 0.1 off end +# device pnp 0.2 off end +# device pnp 0.3 off end +# device pnp 0.4 off end +# device pnp 0.5 on end +# end +end # root_complex diff --git a/src/mainboard/nec/Kconfig b/src/mainboard/nec/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/nec/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/nec/powermate2000/devicetree.cb b/src/mainboard/nec/powermate2000/devicetree.cb new file mode 100644 index 0000000000..cbbc322a24 --- /dev/null +++ b/src/mainboard/nec/powermate2000/devicetree.cb @@ -0,0 +1,59 @@ +chip northbridge/intel/i82810 # Northbridge + device apic_cluster 0 on # APIC cluster + chip cpu/intel/socket_PGA370 # CPU + device apic 0 on end # APIC + end + end + device pci_domain 0 on + device pci 0.0 on end # Host bridge + device pci 1.0 off # Onboard video + # chip drivers/pci/onboard + # device pci 1.0 on end + # register "rom_address" = "0xfff80000" + # end + end + chip southbridge/intel/i82801xx # Southbridge + register "ide0_enable" = "1" + register "ide1_enable" = "1" + + device pci 1e.0 on end # PCI bridge + device pci 1f.0 on # ISA/LPC bridge + chip superio/smsc/smscsuperio # Super I/O (SMSC LPC47B27x) + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.4 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.5 off end # Com2 (N/A) + device pnp 2e.7 on # PS/2 keyboard + irq 0x70 = 1 + irq 0x72 = 0 + end + device pnp 2e.9 off end # Game port (N/A) + device pnp 2e.a on # Power-management events (PME) + io 0x60 = 0x800 + end + device pnp 2e.b on # MIDI port + io 0x60 = 0x330 + irq 0x70 = 5 + end + end + end + device pci 1f.1 on end # IDE + device pci 1f.2 on end # USB + device pci 1f.3 on end # SMBus + device pci 1f.5 on end # AC'97 audio + device pci 1f.6 off end # AC'97 modem (N/A) + end + end +end + diff --git a/src/mainboard/newisys/Kconfig b/src/mainboard/newisys/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/newisys/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/newisys/khepri/devicetree.cb b/src/mainboard/newisys/khepri/devicetree.cb new file mode 100644 index 0000000000..cb8f356e5a --- /dev/null +++ b/src/mainboard/newisys/khepri/devicetree.cb @@ -0,0 +1,92 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_940 + device apic 0 on end + end + chip cpu/amd/socket_940 + device apic 1 on end + end + end + + device pci_domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on end # LDT 0 + device pci 18.0 on # LDT 1 + chip southbridge/amd/amd8131 + device pci 0.0 on end + device pci 0.1 on end + device pci 1.0 on end + device pci 1.1 on end + end + chip southbridge/amd/amd8111 + device pci 0.0 on + device pci 0.0 on end + device pci 0.1 on end + device pci 0.2 on end + device pci 1.0 on end + end + device pci 1.0 on + chip superio/winbond/w83627hf + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on end + device pci 1.2 on end + device pci 1.3 on end + device pci 1.5 on end + device pci 1.6 on end + end + end # LDT1 + device pci 18.0 on end # LDT2 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + chip northbridge/amd/amdk8 + device pci 19.0 on end + device pci 19.0 on end + device pci 19.0 on end + device pci 19.1 on end + device pci 19.2 on end + device pci 19.3 on end + end + end +end + diff --git a/src/mainboard/nvidia/Kconfig b/src/mainboard/nvidia/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/nvidia/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/nvidia/l1_2pvv/devicetree.cb b/src/mainboard/nvidia/l1_2pvv/devicetree.cb new file mode 100644 index 0000000000..5014f0971c --- /dev/null +++ b/src/mainboard/nvidia/l1_2pvv/devicetree.cb @@ -0,0 +1,178 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_F + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 #mc0 + device pci 18.0 on + # devices on link 0, link 0 == LDT 0 + chip southbridge/nvidia/mcp55 + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627ehg + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # SFI + io 0x62 = 0x100 + end + device pnp 2e.7 off # GPIO_GAME_MIDI + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # WDTO_PLED + device pnp 2e.9 off end # GPIO_SUSLED + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 57 on end + end + end # SM + device pci 1.1 on # SM 1 +#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus? +# chip drivers/generic/generic #PCIXA Slot1 +# device i2c 50 on end +# end +# chip drivers/generic/generic #PCIXB Slot1 +# device i2c 51 on end +# end +# chip drivers/generic/generic #PCIXB Slot2 +# device i2c 52 on end +# end +# chip drivers/generic/generic #PCI Slot1 +# device i2c 53 on end +# end +# chip drivers/generic/generic #Master MCP55 PCI-E +# device i2c 54 on end +# end +# chip drivers/generic/generic #Slave MCP55 PCI-E +# device i2c 55 on end +# end + chip drivers/generic/generic #MAC EEPROM + device i2c 51 on end + end + + end # SM + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on end # PCI + device pci 6.1 on end # AZA + device pci 8.0 on end # NIC + device pci 9.0 on end # NIC + device pci a.0 on end # PCI E 5 + device pci b.0 off end # PCI E 4 + device pci c.0 off end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 off end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_addr" = "0x51" + end + end # device pci 18.0 + device pci 18.0 on end # Link 1 + device pci 18.0 on + # devices on link 2, link 2 == LDT 2 + chip southbridge/nvidia/mcp55 + device pci 0.0 on end # HT + device pci 1.0 on end # LPC + device pci 1.1 on end # SM 0 + device pci 2.0 off end # USB 1.1 + device pci 2.1 off end # USB 2 + device pci 4.0 off end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 off end # PCI + device pci 6.1 off end # AZA + device pci 8.0 on end # NIC + device pci 9.0 on end # NIC + device pci a.0 on end # PCI E 5 + device pci b.0 off end # PCI E 4 + device pci c.0 off end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 on end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_addr" = "0x51" + end + end # device pci 18.0 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end # mc0 + + end # PCI domain + +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 on end # pci_regs_all +# device pnp 0.2 on end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 on end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# device pnp 0.8 off end # io +# device pnp 0.9 off end # io +# end +end #root_complex diff --git a/src/mainboard/olpc/Kconfig b/src/mainboard/olpc/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/olpc/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/olpc/btest/devicetree.cb b/src/mainboard/olpc/btest/devicetree.cb new file mode 100644 index 0000000000..e0da82836a --- /dev/null +++ b/src/mainboard/olpc/btest/devicetree.cb @@ -0,0 +1,45 @@ +chip northbridge/amd/gx2 + register "irqmap" = "0xaa5b" + register "setupflash" = "0" + device apic_cluster 0 on + chip cpu/amd/model_gx2 + device apic 0 on end + end + end + device pci_domain 0 on + device pci 1.0 on end + device pci 1.1 on end + chip southbridge/amd/cs5536 + # 0x51400025 (IRQ Mapper LPC Mask)= 0x00001002 + # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK + # 0x5140004E (LPC Serial IRQ Control) = 0xEFFD0080. + # Frame Pulse Width = 4clocks + # IRQ Data Frames = 17Frames + # SIRQ Mode = continous , It would be better if the EC could operate in + # Active(Quiet) mode. Save power.... + # SIRQ Enable = Enabled + # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK + #register "lpc_irq" = "0x00001002" + #register "lpc_serirq_enable" = "0xEFFD0080" + #register "enable_gpio0_inta" = "1" + #register "enable_ide_nand_flash" = "1" + #register "enable_uarta" = "1" + #register "enable_USBP4_host" = "1" + #register "audio_irq" = "5" + #register "usbf4_irq" = "10" + #register "usbf5_irq" = "10" + #register "usbf6_irq" = "0" + #register "usbf7_irq" = "0" + device pci d.0 on end # Realtek 8139 LAN + device pci f.0 on end # ISA Bridge + device pci f.2 on end # IDE Controller + device pci f.3 on end # Audio + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + register "unwanted_vpci[0]" = "0x80007E00" # USB/UDC + register "unwanted_vpci[1]" = "0x80007F00" # USB/OTG + register "unwanted_vpci[2]" = "0" # End of list has a zero + end + end +end + diff --git a/src/mainboard/olpc/rev_a/devicetree.cb b/src/mainboard/olpc/rev_a/devicetree.cb new file mode 100644 index 0000000000..e0da82836a --- /dev/null +++ b/src/mainboard/olpc/rev_a/devicetree.cb @@ -0,0 +1,45 @@ +chip northbridge/amd/gx2 + register "irqmap" = "0xaa5b" + register "setupflash" = "0" + device apic_cluster 0 on + chip cpu/amd/model_gx2 + device apic 0 on end + end + end + device pci_domain 0 on + device pci 1.0 on end + device pci 1.1 on end + chip southbridge/amd/cs5536 + # 0x51400025 (IRQ Mapper LPC Mask)= 0x00001002 + # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK + # 0x5140004E (LPC Serial IRQ Control) = 0xEFFD0080. + # Frame Pulse Width = 4clocks + # IRQ Data Frames = 17Frames + # SIRQ Mode = continous , It would be better if the EC could operate in + # Active(Quiet) mode. Save power.... + # SIRQ Enable = Enabled + # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK + #register "lpc_irq" = "0x00001002" + #register "lpc_serirq_enable" = "0xEFFD0080" + #register "enable_gpio0_inta" = "1" + #register "enable_ide_nand_flash" = "1" + #register "enable_uarta" = "1" + #register "enable_USBP4_host" = "1" + #register "audio_irq" = "5" + #register "usbf4_irq" = "10" + #register "usbf5_irq" = "10" + #register "usbf6_irq" = "0" + #register "usbf7_irq" = "0" + device pci d.0 on end # Realtek 8139 LAN + device pci f.0 on end # ISA Bridge + device pci f.2 on end # IDE Controller + device pci f.3 on end # Audio + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + register "unwanted_vpci[0]" = "0x80007E00" # USB/UDC + register "unwanted_vpci[1]" = "0x80007F00" # USB/OTG + register "unwanted_vpci[2]" = "0" # End of list has a zero + end + end +end + diff --git a/src/mainboard/pcengines/Kconfig b/src/mainboard/pcengines/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/pcengines/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/pcengines/alix1c/devicetree.cb b/src/mainboard/pcengines/alix1c/devicetree.cb new file mode 100644 index 0000000000..34668d1025 --- /dev/null +++ b/src/mainboard/pcengines/alix1c/devicetree.cb @@ -0,0 +1,86 @@ +chip northbridge/amd/lx + device pci_domain 0 on + device pci 1.0 on end + device pci 1.1 on end + chip southbridge/amd/cs5536 + # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK + # SIRQ Mode = Active(Quiet) mode. Save power.... + # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK + # How to get these? Boot linux and do this: + # rdmsr 0x51400025 + register "lpc_serirq_enable" = "0x0000105a" + # rdmsr 0x5140004e -- polairy is high 16 bits of low 32 bits + register "lpc_serirq_polarity" = "0x0000EFA5" + # mode is high 10 bits (determined from code) + register "lpc_serirq_mode" = "1" + # Don't yet know how to find this. + register "enable_gpio_int_route" = "0x0D0C0700" + register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash + register "enable_USBP4_device" = "0" #0: host, 1:device + register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) + register "com1_enable" = "0" + register "com1_address" = "0x3F8" + register "com1_irq" = "4" + register "com2_enable" = "0" + register "com2_address" = "0x2F8" + register "com2_irq" = "3" + register "unwanted_vpci[0]" = "0" # End of list has a zero + device pci f.0 on # ISA Bridge + chip superio/winbond/w83627hf + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 on end # GPIO2 + device pnp 2e.9 on end # GPIO3 + device pnp 2e.a on end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci f.1 on end # Flash controller + device pci f.2 on end # IDE controller + device pci f.3 on end # Audio + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + end + end + + # APIC cluster is late CPU init. + device apic_cluster 0 on + chip cpu/amd/model_lx + device apic 0 on end + end + end + +end + diff --git a/src/mainboard/rca/Kconfig b/src/mainboard/rca/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/rca/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/rca/rm4100/devicetree.cb b/src/mainboard/rca/rm4100/devicetree.cb new file mode 100644 index 0000000000..09d1e2b635 --- /dev/null +++ b/src/mainboard/rca/rm4100/devicetree.cb @@ -0,0 +1,73 @@ +chip northbridge/intel/i82830 # Northbridge + device pci_domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + chip drivers/pci/onboard # Onboard VGA + device pci 2.0 on end # VGA (Intel 82830 CGC) + register "rom_address" = "0xfff00000" + end + chip southbridge/intel/i82801xx # Southbridge + register "pirqa_routing" = "0x05" + register "pirqb_routing" = "0x06" + register "pirqc_routing" = "0x07" + register "pirqd_routing" = "0x09" + register "pirqe_routing" = "0x0a" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x0b" + + register "ide0_enable" = "1" + register "ide1_enable" = "1" + + device pci 1d.0 on end # USB UHCI Controller #1 + device pci 1d.1 on end # USB UHCI Controller #2 + device pci 1d.2 on end # USB UHCI Controller #3 + device pci 1d.7 on end # USB2 EHCI Controller + device pci 1e.0 on # PCI bridge + device pci 08.0 on end # Intel 82801DB PRO/100 VE Ethernet + end + device pci 1f.0 on # ISA/LPC bridge + chip superio/smsc/smscsuperio # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 4 + end + device pnp 2e.4 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.5 on # Com2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.7 on # PS/2 keyboard/mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # Keyboard interrupt + irq 0x72 = 12 # Mouse interrupt + end + device pnp 2e.9 off end # Game port + device pnp 2e.a on # PME + io 0x60 = 0x800 + end + device pnp 2e.b off end # MPU-401 + end + end + device pci 1f.1 on end # IDE + device pci 1f.3 on end # SMBus + device pci 1f.5 on end # AC'97 audio + device pci 1f.6 on end # AC'97 modem + end + end + device apic_cluster 0 on # APIC cluster + chip cpu/intel/socket_PGA370 # Mobile Celeron Micro-FCBGA Socket 479 + device apic 0 on end # APIC + end + end +end + diff --git a/src/mainboard/soyo/Kconfig b/src/mainboard/soyo/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/soyo/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/sunw/Kconfig b/src/mainboard/sunw/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/sunw/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/sunw/ultra40/devicetree.cb b/src/mainboard/sunw/ultra40/devicetree.cb new file mode 100644 index 0000000000..01a59f714e --- /dev/null +++ b/src/mainboard/sunw/ultra40/devicetree.cb @@ -0,0 +1,155 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_940 + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 #mc0 + device pci 18.0 on end # link 0 + device pci 18.0 on # link1 + # devices on link 0, link 0 == LDT 0 + chip southbridge/nvidia/ck804 + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/smsc/lpc47m10x + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.3 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.5 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.7 off # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 57 on end + end + end # SM + device pci 1.1 on # SM 1 +#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus? +# chip drivers/generic/generic #PCIXA Slot1 +# device i2c 50 on end +# end +# chip drivers/generic/generic #PCIXB Slot1 +# device i2c 51 on end +# end +# chip drivers/generic/generic #PCIXB Slot2 +# device i2c 52 on end +# end +# chip drivers/generic/generic #PCI Slot1 +# device i2c 53 on end +# end +# chip drivers/generic/generic #Master CK804 PCI-E +# device i2c 54 on end +# end +# chip drivers/generic/generic #Slave CK804 PCI-E +# device i2c 55 on end +# end + chip drivers/generic/generic #MAC EEPROM + device i2c 51 on end + end + + end # SM + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # ACI + device pci 4.1 off end # MCI + device pci 6.0 on end # IDE + device pci 7.0 on end # SATA 1 + device pci 8.0 on end # SATA 0 + device pci 9.0 on end # PCI + device pci a.0 on end # NIC + device pci b.0 off end # PCI E 3 + device pci c.0 off end # PCI E 2 + device pci d.0 off end # PCI E 1 + device pci e.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" +# register "nic_rom_address" = "0xfff80000" # 64k +# register "raid_rom_address" = "0xfff90000" + register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_addr" = "0x51" + end + end # device pci 18.0 + device pci 18.0 on end # link 2 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end # mc0 + + chip northbridge/amd/amdk8 + device pci 19.0 on end # link 0 + device pci 19.0 on + # devices on link 1, link 1 == LDT 1 + chip southbridge/nvidia/ck804 + device pci 0.0 on end # HT + device pci 1.0 on end # LPC + device pci 1.1 off end # SM + device pci 2.0 off end # USB 1.1 + device pci 2.1 off end # USB 2 + device pci 4.0 off end # ACI + device pci 4.1 off end # MCI + device pci 6.0 off end # IDE + device pci 7.0 off end # SATA 1 + device pci 8.0 off end # SATA 0 + device pci 9.0 off end # PCI + device pci a.0 on end # NIC + device pci b.0 off end # PCI E 3 + device pci c.0 off end # PCI E 2 + device pci d.0 off end # PCI E 1 + device pci e.0 on end # PCI E 0 +# register "nic_rom_address" = "0xfff80000" # 64k + register "mac_eeprom_smbus" = "3" + register "mac_eeprom_addr" = "0x51" + end + end # device pci 19.0 + + device pci 19.0 on end + device pci 19.1 on end + device pci 19.2 on end + device pci 19.3 on end + end + end # PCI domain + +end #root_complex diff --git a/src/mainboard/supermicro/Kconfig b/src/mainboard/supermicro/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/supermicro/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/supermicro/h8dme/devicetree.cb b/src/mainboard/supermicro/h8dme/devicetree.cb new file mode 100644 index 0000000000..90491e45ed --- /dev/null +++ b/src/mainboard/supermicro/h8dme/devicetree.cb @@ -0,0 +1,143 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_F + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 #mc0 + device pci 18.0 on end + device pci 18.0 on end + device pci 18.0 on + # devices on link 0, link 0 == LDT 0 + chip southbridge/nvidia/mcp55 + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627hf + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # SFI + io 0x62 = 0x100 + end + device pnp 2e.7 off # GPIO_GAME_MIDI + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # WDTO_PLED + device pnp 2e.9 off end # GPIO_SUSLED + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/i2c/i2cmux2 + device i2c 48 off end + device i2c 49 off end + end + end # SM + device pci 1.1 on # SM 1 +#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus? +# chip drivers/generic/generic #PCIXA Slot1 +# device i2c 50 on end +# end +# chip drivers/generic/generic #PCIXB Slot1 +# device i2c 51 on end +# end +# chip drivers/generic/generic #PCIXB Slot2 +# device i2c 52 on end +# end +# chip drivers/generic/generic #PCI Slot1 +# device i2c 53 on end +# end +# chip drivers/generic/generic #Master MCP55 PCI-E +# device i2c 54 on end +# end +# chip drivers/generic/generic #Slave MCP55 PCI-E +# device i2c 55 on end +# end + chip drivers/generic/generic #MAC EEPROM + device i2c 51 on end + end + + end # SM + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on # PCI + chip drivers/pci/onboard + device pci 6.0 on end + register "rom_address" = "0xfff00000" #for 1M +# register "rom_address" = "0xfff80000" #for 512K + end + end + device pci 6.1 on end # AZA + device pci 8.0 on end # NIC + device pci 9.0 on end # NIC + device pci a.0 on # PCI E 5 + device pci 0.0 on #nec pci-x + end + device pci 0.1 on #nec pci-x + device pci 4.0 on end #scsi + device pci 4.1 on end #scsi + end + end + device pci b.0 on end # PCI E 4 + device pci c.0 on end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 on end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_addr" = "0x51" + end + end # device pci 18.0 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end # mc0 + + end # PCI domain + +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 on end # pci_regs_all +# device pnp 0.2 off end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 on end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# device pnp 0.8 off end # io +# device pnp 0.9 on end # io +# end +end #root_complex diff --git a/src/mainboard/supermicro/h8dmr/devicetree.cb b/src/mainboard/supermicro/h8dmr/devicetree.cb new file mode 100644 index 0000000000..9f5fd765bf --- /dev/null +++ b/src/mainboard/supermicro/h8dmr/devicetree.cb @@ -0,0 +1,163 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_F + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 #mc0 + device pci 18.0 on end + device pci 18.0 on end + device pci 18.0 on + # devices on link 0, link 0 == LDT 0 + chip southbridge/nvidia/mcp55 + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627hf + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # SFI + io 0x62 = 0x100 + end + device pnp 2e.7 off # GPIO_GAME_MIDI + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # WDTO_PLED + device pnp 2e.9 off end # GPIO_SUSLED + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 57 on end + end + end # SM + device pci 1.1 on # SM 1 +#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus? +# chip drivers/generic/generic #PCIXA Slot1 +# device i2c 50 on end +# end +# chip drivers/generic/generic #PCIXB Slot1 +# device i2c 51 on end +# end +# chip drivers/generic/generic #PCIXB Slot2 +# device i2c 52 on end +# end +# chip drivers/generic/generic #PCI Slot1 +# device i2c 53 on end +# end +# chip drivers/generic/generic #Master MCP55 PCI-E +# device i2c 54 on end +# end +# chip drivers/generic/generic #Slave MCP55 PCI-E +# device i2c 55 on end +# end + chip drivers/generic/generic #MAC EEPROM + device i2c 51 on end + end + + end # SM + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on # PCI + chip drivers/pci/onboard + device pci 6.0 on end + register "rom_address" = "0xfff00000" #for 1M +# register "rom_address" = "0xfff80000" #for 512K + end + end + device pci 6.1 on end # AZA + device pci 8.0 on end # NIC + device pci 9.0 on end # NIC + device pci a.0 on # PCI E 5 + device pci 0.0 on #nec pci-x + end + device pci 0.1 on #nec pci-x + device pci 4.0 on end #scsi + device pci 4.1 on end #scsi + end + end + device pci b.0 on end # PCI E 4 + device pci c.0 on end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 on end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_addr" = "0x51" + end + end # device pci 18.0 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end # mc0 + + end # PCI domain + +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 on end # pci_regs_all +# device pnp 0.2 off end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 on end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# device pnp 0.8 off end # io +# device pnp 0.9 on end # io +# end +end #root_complex diff --git a/src/mainboard/supermicro/x6dai_g/devicetree.cb b/src/mainboard/supermicro/x6dai_g/devicetree.cb new file mode 100644 index 0000000000..97176b9b78 --- /dev/null +++ b/src/mainboard/supermicro/x6dai_g/devicetree.cb @@ -0,0 +1,64 @@ +chip northbridge/intel/e7525 # mch + device pci_domain 0 on + chip southbridge/intel/esb6300 # esb6300 + register "pirq_a_d" = "0x0b0a0a05" + register "pirq_e_h" = "0x0a0b0c80" + + device pci 1c.0 on end + + device pci 1d.0 on end + device pci 1d.1 on end + device pci 1d.4 on end + device pci 1d.5 on end + device pci 1d.7 on end + + device pci 1e.0 on end + + device pci 1f.0 on + chip superio/winbond/w83627hf + device pnp 2e.0 off end + device pnp 2e.1 off end + device pnp 2e.2 on + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.4 off end + device pnp 2e.5 off end + device pnp 2e.6 off end + device pnp 2e.7 off end + device pnp 2e.9 off end + device pnp 2e.a on end + device pnp 2e.b off end + device pnp 2e.f off end + device pnp 2e.10 off end + device pnp 2e.14 off end + end + end + device pci 1f.1 on end + device pci 1f.2 on end + device pci 1f.3 on end + device pci 1f.5 off end + device pci 1f.6 on end + end + device pci 00.0 on end + device pci 00.1 on end + device pci 00.2 on end + device pci 02.0 on end + device pci 03.0 on end + device pci 04.0 on end + device pci 08.0 on end + end + device apic_cluster 0 on + chip cpu/intel/socket_mPGA604 # cpu0 + device apic 0 on end + end + chip cpu/intel/socket_mPGA604 # cpu1 + device apic 6 on end + end + end +end + diff --git a/src/mainboard/supermicro/x6dhe_g/devicetree.cb b/src/mainboard/supermicro/x6dhe_g/devicetree.cb new file mode 100644 index 0000000000..d5625e4c7c --- /dev/null +++ b/src/mainboard/supermicro/x6dhe_g/devicetree.cb @@ -0,0 +1,86 @@ +chip northbridge/intel/e7520 # MCH + chip drivers/generic/debug # DEBUGGING + device pnp 00.0 on end + device pnp 00.1 off end + device pnp 00.2 off end + device pnp 00.3 off end + end + device pci_domain 0 on + chip southbridge/intel/esb6300 # ESB6300 + register "pirq_a_d" = "0x0b070a05" + register "pirq_e_h" = "0x0a808080" + + device pci 1c.0 on + chip drivers/generic/generic + device pci 01.0 on end # onboard gige1 + device pci 02.0 on end # onboard gige2 + end + end + + # USB ports + device pci 1d.0 on end + device pci 1d.1 on end + device pci 1d.4 on end # Southbridge Watchdog timer + device pci 1d.5 on end # Southbridge I/O apic1 + device pci 1d.7 on end + + # VGA / PCI 32-bit + device pci 1e.0 on + chip drivers/generic/generic + device pci 01.0 on end + end + end + + + device pci 1f.0 on # ISA bridge + chip superio/winbond/w83627hf + device pnp 2e.0 off end + device pnp 2e.2 on + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.4 off end + device pnp 2e.5 off end + device pnp 2e.6 off end + device pnp 2e.7 off end + device pnp 2e.9 off end + device pnp 2e.a on end + device pnp 2e.b off end + end + end + device pci 1f.1 on end + device pci 1f.2 off end + device pci 1f.3 on end # SMBus + device pci 1f.5 off end + device pci 1f.6 off end + end + + device pci 00.0 on end # Northbridge + device pci 00.1 on end # Northbridge Error reporting + device pci 01.0 on end + device pci 02.0 on + chip southbridge/intel/pxhd # PXHD 6700 + device pci 00.0 on end # bridge + device pci 00.1 on end # I/O apic + device pci 00.2 on end # bridge + device pci 00.3 on end # I/O apic + end + end +# device register "intrline" = "0x00070105" + device pci 04.0 on end + device pci 06.0 on end + end + + device apic_cluster 0 on + chip cpu/intel/socket_mPGA604 # CPU 0 + device apic 0 on end + end + chip cpu/intel/socket_mPGA604 # CPU 1 + device apic 6 on end + end + end +end diff --git a/src/mainboard/supermicro/x6dhe_g2/devicetree.cb b/src/mainboard/supermicro/x6dhe_g2/devicetree.cb new file mode 100644 index 0000000000..4bb720707c --- /dev/null +++ b/src/mainboard/supermicro/x6dhe_g2/devicetree.cb @@ -0,0 +1,86 @@ +chip northbridge/intel/e7520 # MCH + chip drivers/generic/debug # DEBUGGING + device pnp 00.0 off end + device pnp 00.1 off end + device pnp 00.2 off end + device pnp 00.3 off end + end + device pci_domain 0 on + chip southbridge/intel/i82801er # ICH5R + register "pirq_a_d" = "0x0b070a05" + register "pirq_e_h" = "0x0a808080" + + device pci 1c.0 on + chip drivers/generic/generic + device pci 01.0 on end # onboard gige1 + device pci 02.0 on end # onboard gige2 + end + end + + # USB ports + device pci 1d.0 on end + device pci 1d.1 on end + device pci 1d.4 on end # Southbridge Watchdog timer + device pci 1d.5 on end # Southbridge I/O apic1 + device pci 1d.7 on end + + # VGA / PCI 32-bit + device pci 1e.0 on + chip drivers/generic/generic + device pci 01.0 on end + end + end + + + device pci 1f.0 on # ISA bridge + chip superio/nsc/pc87427 + device pnp 2e.0 off end + device pnp 2e.2 on + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.4 off end + device pnp 2e.5 off end + device pnp 2e.6 off end + device pnp 2e.7 off end + device pnp 2e.9 off end + device pnp 2e.a on end + device pnp 2e.b off end + end + end + device pci 1f.1 on end + device pci 1f.2 on end + device pci 1f.3 on end # SMBus + device pci 1f.5 off end + device pci 1f.6 off end + end + + device pci 00.0 on end # Northbridge + device pci 00.1 on end # Northbridge Error reporting + device pci 01.0 on end + device pci 02.0 on + chip southbridge/intel/pxhd # PXHD 6700 + device pci 00.0 on end # bridge + device pci 00.1 on end # I/O apic + device pci 00.2 on end # bridge + device pci 00.3 on end # I/O apic + end + end +# device register "intrline" = "0x00070105" + device pci 04.0 on end + device pci 06.0 on end + end + + device apic_cluster 0 on + chip cpu/intel/socket_mPGA604 # CPU 0 + device apic 0 on end + end + chip cpu/intel/socket_mPGA604 # CPU 1 + device apic 6 on end + end + end +end diff --git a/src/mainboard/supermicro/x6dhr_ig/devicetree.cb b/src/mainboard/supermicro/x6dhr_ig/devicetree.cb new file mode 100644 index 0000000000..8a82ed7c40 --- /dev/null +++ b/src/mainboard/supermicro/x6dhr_ig/devicetree.cb @@ -0,0 +1,84 @@ +chip northbridge/intel/e7520 # mch + device pci_domain 0 on + chip southbridge/intel/i82801er # i82801er + # USB ports + device pci 1d.0 on end + device pci 1d.1 on end + device pci 1d.2 on end + device pci 1d.3 on end + device pci 1d.7 on end + + # -> VGA + device pci 1e.0 on end + + # -> IDE + device pci 1f.0 on + chip superio/winbond/w83627hf + device pnp 2e.0 off end + device pnp 2e.2 on + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.4 off end + device pnp 2e.5 off end + device pnp 2e.6 off end + device pnp 2e.7 off end + device pnp 2e.9 off end + device pnp 2e.a on end + device pnp 2e.b off end + end + end + device pci 1f.1 on end + device pci 1f.2 on end + device pci 1f.3 on end + + register "pirq_a_d" = "0x0b070a05" + register "pirq_e_h" = "0x0a808080" + end + device pci 00.0 on end + device pci 00.1 on end + device pci 01.0 on end + device pci 02.0 on end + device pci 03.0 on + chip southbridge/intel/pxhd # pxhd1 + # Bus bridges and ioapics usually bus 2 + device pci 0.0 on end + device pci 0.1 on end + device pci 0.2 on + # On board gig e1000 + chip drivers/generic/generic + device pci 02.0 on end + device pci 02.1 on end + end + end + device pci 0.3 on end + end + end + device pci 04.0 on + chip southbridge/intel/pxhd # pxhd2 + # Bus bridges and ioapics usually bus 5 + device pci 0.0 on end + # Slot 6 is usually 6:2.0 + device pci 0.1 on end + device pci 0.2 on end + # Slot 7 is usually 7:2.0 + device pci 0.3 on end + end + end + device pci 06.0 on end + end + device apic_cluster 0 on + chip cpu/intel/socket_mPGA604 # cpu 0 + device apic 0 on end + end + chip cpu/intel/socket_mPGA604 # cpu 1 + device apic 6 on end + end + end + register "intrline" = "0x00070105" +end + diff --git a/src/mainboard/supermicro/x6dhr_ig2/devicetree.cb b/src/mainboard/supermicro/x6dhr_ig2/devicetree.cb new file mode 100644 index 0000000000..ab56509fd9 --- /dev/null +++ b/src/mainboard/supermicro/x6dhr_ig2/devicetree.cb @@ -0,0 +1,75 @@ +chip northbridge/intel/e7520 # mch + device pci_domain 0 on + chip southbridge/intel/i82801er # i82801er + # USB ports + device pci 1d.0 on end + device pci 1d.1 on end + device pci 1d.2 on end + device pci 1d.3 on end + device pci 1d.7 on end + + # -> Bridge + device pci 1e.0 on end + + # -> ISA + device pci 1f.0 on + chip superio/winbond/w83627hf + device pnp 2e.0 off end + device pnp 2e.2 on + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.4 off end + device pnp 2e.5 off end + device pnp 2e.6 off end + device pnp 2e.7 off end + device pnp 2e.9 off end + device pnp 2e.a on end + device pnp 2e.b off end + end + end + # -> IDE + device pci 1f.1 on end + # -> SATA + device pci 1f.2 on end + device pci 1f.3 on end + + register "pirq_a_d" = "0x0b070a05" + register "pirq_e_h" = "0x0a808080" + end + device pci 00.0 on end + device pci 00.1 on end + device pci 01.0 on end + device pci 02.0 on + chip southbridge/intel/pxhd # pxhd1 + # Bus bridges and ioapics usually bus 1 + device pci 0.0 on + # On board gig e1000 + chip drivers/generic/generic + device pci 03.0 on end + device pci 03.1 on end + end + end + device pci 0.1 on end + device pci 0.2 on end + device pci 0.3 on end + end + end + device pci 04.0 on end + device pci 06.0 on end + end + device apic_cluster 0 on + chip cpu/intel/socket_mPGA604 # cpu 0 + device apic 0 on end + end + chip cpu/intel/socket_mPGA604 # cpu 1 + device apic 6 on end + end + end + register "intrline" = "0x00070105" +end + diff --git a/src/mainboard/technexion/Kconfig b/src/mainboard/technexion/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/technexion/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/technexion/tim8690/devicetree.cb b/src/mainboard/technexion/tim8690/devicetree.cb new file mode 100644 index 0000000000..cb0691489d --- /dev/null +++ b/src/mainboard/technexion/tim8690/devicetree.cb @@ -0,0 +1,117 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_S1G1 + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on # southbridge + chip southbridge/amd/rs690 + device pci 0.0 on end # HT 0x7910 + device pci 1.0 on # Internal Graphics P2P bridge 0x7912 + chip drivers/pci/onboard + device pci 5.0 on end # Internal Graphics 0x791F + register "rom_address" = "0xfff80000" + end + end + device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913 + device pci 3.0 off end # PCIE P2P bridge 0x791b + device pci 4.0 on end # PCIE P2P bridge 0x7914 + device pci 5.0 on end # PCIE P2P bridge 0x7915 + device pci 6.0 on end # PCIE P2P bridge 0x7916 + device pci 7.0 on end # PCIE P2P bridge 0x7917 + device pci 8.0 off end # NB/SB Link P2P bridge + register "vga_rom_address" = "0xfff80000" + register "gpp_configuration" = "4" + register "port_enable" = "0xfc" + register "gfx_dev2_dev3" = "1" + register "gfx_dual_slot" = "0" + register "gfx_lane_reversal" = "0" + register "gfx_tmds" = "0" + register "gfx_compliance" = "0" + register "gfx_reconfiguration" = "1" + register "gfx_link_width" = "0" + end + chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus + device pci 12.0 on end # SATA 0x4380 + device pci 13.0 on end # USB 0x4387 + device pci 13.1 on end # USB 0x4388 + device pci 13.2 on end # USB 0x4389 + device pci 13.3 on end # USB 0x438a + device pci 13.4 on end # USB 0x438b + device pci 13.5 on end # USB 2 0x4386 + device pci 14.0 on # SM 0x4385 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + end # SM + device pci 14.1 on end # IDE 0x438c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x438d + chip superio/ite/it8712f + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 off end # EC + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # Mouse + irq 0x70 = 12 + end + device pnp 2e.7 off # GPIO, must be closed for unresolved reason. + end + device pnp 2e.8 off # MIDI + io 0x60 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.9 off # GAME + io 0x60 = 0x220 + end + device pnp 2e.a off end # CIR + end #superio/ite/it8712f + end #LPC + device pci 14.4 on end # PCI 0x4384 + device pci 14.5 on end # ACI 0x4382 + device pci 14.6 on end # MCI 0x438e + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "hda_viddid" = "0x10ec0882" + end #southbridge/amd/sb600 + end # device pci 18.0 + + device pci 18.0 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end #northbridge/amd/amdk8 + end #pci_domain +end #northbridge/amd/amdk8/root_complex + diff --git a/src/mainboard/technologic/Kconfig b/src/mainboard/technologic/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/technologic/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/technologic/ts5300/devicetree.cb b/src/mainboard/technologic/ts5300/devicetree.cb new file mode 100644 index 0000000000..4e752516c7 --- /dev/null +++ b/src/mainboard/technologic/ts5300/devicetree.cb @@ -0,0 +1,16 @@ +chip cpu/amd/sc520 + device pci_domain 0 on + device pci 0.0 on end + +# chip drivers/pci/onboard +# device pci 12.0 on end # enet +# end +# chip drivers/pci/onboard +# device pci 14.0 on end # 69000 +# register "rom_address" = "0x2000000" +# end +# register "com1" = "{1}" +# register "com1" = "{1, 0, 0x3f8, 4}" + end + +end diff --git a/src/mainboard/televideo/Kconfig b/src/mainboard/televideo/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/televideo/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/televideo/tc7020/devicetree.cb b/src/mainboard/televideo/tc7020/devicetree.cb new file mode 100644 index 0000000000..bf89cf24b1 --- /dev/null +++ b/src/mainboard/televideo/tc7020/devicetree.cb @@ -0,0 +1,57 @@ +chip northbridge/amd/gx1 # Northbridge + device pci_domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + chip southbridge/amd/cs5530 # Southbridge + device pci 12.0 on # ISA bridge + chip superio/nsc/pc97317 # Super I/O + device pnp 2e.0 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.1 on # PS/2 mouse + irq 0x70 = 12 + end + device pnp 2e.2 on # RTC, Advanced power control (APC) + io 0x60 = 0x70 + irq 0x70 = 8 + end + device pnp 2e.3 off # Floppy (N/A on this board) + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.4 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.5 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.6 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.7 on # GPIO + io 0x60 = 0xe0 + end + device pnp 2e.8 on # Power management + io 0x60 = 0xe8 + end + end + end + device pci 12.1 off end # SMI + device pci 12.2 on end # IDE + device pci 12.3 on end # Audio + device pci 12.4 on end # VGA (onboard) + device pci 13.0 on end # USB + device pci 14.0 on end # MiniPCI slot + device pci 15.0 on end # Ethernet (onboard) + register "ide0_enable" = "1" + register "ide1_enable" = "0" # Not available/needed on this board + end + end + chip cpu/amd/model_gx1 # CPU + end +end diff --git a/src/mainboard/thomson/Kconfig b/src/mainboard/thomson/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/thomson/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/thomson/ip1000/devicetree.cb b/src/mainboard/thomson/ip1000/devicetree.cb new file mode 100644 index 0000000000..c3e0e7f8fe --- /dev/null +++ b/src/mainboard/thomson/ip1000/devicetree.cb @@ -0,0 +1,73 @@ +chip northbridge/intel/i82830 # Northbridge + device pci_domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + chip drivers/pci/onboard # Onboard VGA + device pci 2.0 on end # VGA (Intel 82830 CGC) + register "rom_address" = "0xfff00000" + end + chip southbridge/intel/i82801xx # Southbridge + register "pirqa_routing" = "0x05" + register "pirqb_routing" = "0x06" + register "pirqc_routing" = "0x07" + register "pirqd_routing" = "0x09" + register "pirqe_routing" = "0x0a" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x0b" + + register "ide0_enable" = "1" + register "ide1_enable" = "1" + + device pci 1d.0 on end # USB UHCI Controller #1 + device pci 1d.1 on end # USB UHCI Controller #2 + device pci 1d.2 on end # USB UHCI Controller #3 + device pci 1d.7 on end # USB2 EHCI Controller + device pci 1e.0 on # PCI bridge + device pci 08.0 on end # Intel 82801DB PRO/100 VE Ethernet + end + device pci 1f.0 on # ISA/LPC bridge + chip superio/smsc/smscsuperio # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 4 + end + device pnp 2e.4 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.5 on # Com2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.7 on # PS/2 keyboard/mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # Keyboard interrupt + irq 0x72 = 12 # Mouse interrupt + end + device pnp 2e.9 off end # Game port + device pnp 2e.a on # PME + io 0x60 = 0x800 + end + device pnp 2e.b off end # MPU-401 + end + end + device pci 1f.1 on end # IDE + device pci 1f.3 on end # SMBus + device pci 1f.5 on end # AC'97 audio + device pci 1f.6 off end # AC'97 modem + end + end + device apic_cluster 0 on # APIC cluster + chip cpu/intel/socket_PGA370 # Low Voltage PIII Micro-FCBGA Socket 479 + device apic 0 on end # APIC + end + end +end + diff --git a/src/mainboard/totalimpact/Kconfig b/src/mainboard/totalimpact/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/totalimpact/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/totalimpact/briq/devicetree.cb b/src/mainboard/totalimpact/briq/devicetree.cb new file mode 100644 index 0000000000..ceb278787d --- /dev/null +++ b/src/mainboard/totalimpact/briq/devicetree.cb @@ -0,0 +1,22 @@ +chip northbridge/ibm/cpc710 + device pci_domain 0 on # 32bit pci bridge + device pci 0.0 on + chip southbridge/winbond/w83c553 + # FIXME The function numbers are ok but the device id is wrong here! + device pci 0.0 on end # pci to isa bridge + device pci 0.1 on end # pci ide controller + end + end + end + device cpu_bus 0 on + # chip cpu/ppc/ppc7xx + # device cpu 0 on end + # end + end +end + +## +## Build the objects we have code for in this directory. +## + +addaction coreboot.a "$(CONFIG_CROSS_COMPILE)ranlib coreboot.a" diff --git a/src/mainboard/tyan/Kconfig b/src/mainboard/tyan/Kconfig new file mode 100644 index 0000000000..792d600548 --- /dev/null +++ b/src/mainboard/tyan/Kconfig @@ -0,0 +1 @@ +# diff --git a/src/mainboard/tyan/s1846/devicetree.cb b/src/mainboard/tyan/s1846/devicetree.cb new file mode 100644 index 0000000000..b938fa3786 --- /dev/null +++ b/src/mainboard/tyan/s1846/devicetree.cb @@ -0,0 +1,55 @@ +chip northbridge/intel/i440bx # Northbridge + device apic_cluster 0 on # APIC cluster + chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually) + device apic 0 on end # APIC + end + end + device pci_domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 7.0 on # ISA bridge + chip superio/nsc/pc87309 # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.4 on # Power management + end + device pnp 2e.5 on # PS/2 mouse + irq 0x70 = 12 + end + device pnp 2e.6 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + end + end + device pci 7.1 on end # IDE + device pci 7.2 on end # USB + device pci 7.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end +end diff --git a/src/mainboard/tyan/s2735/devicetree.cb b/src/mainboard/tyan/s2735/devicetree.cb new file mode 100644 index 0000000000..d491f6c6eb --- /dev/null +++ b/src/mainboard/tyan/s2735/devicetree.cb @@ -0,0 +1,91 @@ +chip northbridge/intel/e7501 + device pci_domain 0 on + device pci 0.0 on end + device pci 0.1 on end + device pci 2.0 on + chip southbridge/intel/i82870 + device pci 1c.0 on end + device pci 1d.0 on + chip drivers/pci/onboard + device pci 1.0 on end # intel lan + device pci 1.1 on end + end + end + device pci 1e.0 on end + device pci 1f.0 on end + end + end + device pci 6.0 on end + chip southbridge/intel/i82801er + device pci 1d.0 on end + device pci 1d.1 on end + device pci 1d.2 on end + device pci 1d.3 on end + device pci 1d.7 on end + device pci 1e.0 on + chip drivers/pci/onboard + device pci 1.0 on end # intel lan 10/100 + end + chip drivers/pci/onboard + device pci 2.0 on end # ati + end + end + device pci 1f.0 on + chip superio/winbond/w83627hf + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1f.1 off end + device pci 1f.2 on end + device pci 1f.3 on end + device pci 1f.5 off end + device pci 1f.6 off end + end # SB + end # PCI_DOMAIN + device apic_cluster 0 on + chip cpu/intel/socket_mPGA604 + device apic 0 on end + end + chip cpu/intel/socket_mPGA604 + device apic 6 on end + end + end +end + diff --git a/src/mainboard/tyan/s2850/devicetree.cb b/src/mainboard/tyan/s2850/devicetree.cb new file mode 100644 index 0000000000..ebb4fe60f8 --- /dev/null +++ b/src/mainboard/tyan/s2850/devicetree.cb @@ -0,0 +1,98 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_940 + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on # LDT0 + # devices on link 2, link 2 == LDT 2 + chip southbridge/amd/amd8111 + # this "device pci 0.0" is the parent the next one + # PCI bridge + device pci 0.0 on + device pci 0.0 on end + device pci 0.1 on end + device pci 0.2 off end + device pci 1.0 off end + #chip drivers/ati/ragexl + chip drivers/pci/onboard + device pci b.0 on end + register "rom_address" = "0xfff80000" + end + end + device pci 1.0 on + chip superio/winbond/w83627hf + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on end + device pci 1.2 on end + device pci 1.3 on + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + end + device pci 1.5 on end + device pci 1.6 off end + register "ide0_enable" = "1" + register "ide1_enable" = "1" + end + end # device pci 18.0 + device pci 18.0 on end + device pci 18.0 on end + + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end + diff --git a/src/mainboard/tyan/s2875/devicetree.cb b/src/mainboard/tyan/s2875/devicetree.cb new file mode 100644 index 0000000000..1b4bb28c38 --- /dev/null +++ b/src/mainboard/tyan/s2875/devicetree.cb @@ -0,0 +1,90 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_940 + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on # northbridge + # devices on link 0, link 0 == LDT 0 + chip southbridge/amd/amd8151 + # the on/off keyword is mandatory + device pci 0.0 on end + device pci 1.0 on end + end + chip southbridge/amd/amd8111 + # this "device pci 0.0" is the parent the next one + # PCI bridge + device pci 0.0 on + device pci 0.0 on end + device pci 0.1 on end + device pci 0.2 off end + device pci 1.0 off end + chip drivers/pci/onboard + device pci 5.0 on end + register "rom_address" = "0xfff80000" + end + end + device pci 1.0 on + chip superio/winbond/w83627hf + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on end + device pci 1.2 on end + device pci 1.3 on end + device pci 1.5 on end + device pci 1.6 off end + register "ide0_enable" = "1" + register "ide1_enable" = "1" + end + end # device pci 18.0 + + device pci 18.0 on end + device pci 18.0 on end + + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end + diff --git a/src/mainboard/tyan/s2880/devicetree.cb b/src/mainboard/tyan/s2880/devicetree.cb new file mode 100644 index 0000000000..9d1e44c974 --- /dev/null +++ b/src/mainboard/tyan/s2880/devicetree.cb @@ -0,0 +1,105 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_940 + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on # northbridge + # devices on link 0, link 0 == LDT 0 + chip southbridge/amd/amd8131 + # the on/off keyword is mandatory + device pci 0.0 on + chip drivers/pci/onboard + device pci 9.0 on end #broadcom + device pci 9.1 on end + end +# chip drivers/lsi/53c1030 +# device pci a.0 on end +# device pci a.1 on end +# register "fw_address" = "0xfff8c000" +# end + end + device pci 0.1 on end + device pci 1.0 on end + device pci 1.1 on end + end + chip southbridge/amd/amd8111 + # this "device pci 0.0" is the parent the next one + # PCI bridge + device pci 0.0 on + device pci 0.0 on end + device pci 0.1 on end + device pci 0.2 off end + device pci 1.0 off end + chip drivers/pci/onboard + device pci 5.0 on end #some sata + end + chip drivers/pci/onboard + device pci 6.0 on end #adti + register "rom_address" = "0xfff80000" + end + end + device pci 1.0 on + chip superio/winbond/w83627hf + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on end + device pci 1.2 on end + device pci 1.3 on end + device pci 1.5 off end + device pci 1.6 off end + register "ide0_enable" = "1" + register "ide1_enable" = "1" + end + end # device pci 18.0 + + device pci 18.0 on end + device pci 18.0 on end + + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end + diff --git a/src/mainboard/tyan/s2881/devicetree.cb b/src/mainboard/tyan/s2881/devicetree.cb new file mode 100644 index 0000000000..57673a9bea --- /dev/null +++ b/src/mainboard/tyan/s2881/devicetree.cb @@ -0,0 +1,140 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_940 + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on end # LDT0 + device pci 18.0 on end # LDT1 + device pci 18.0 on # northbridge + # devices on link 2, link 2 == LDT 2 + chip southbridge/amd/amd8131 + # the on/off keyword is mandatory + device pci 0.0 on + chip drivers/pci/onboard + device pci 9.0 on end # Broadcom 5704 + device pci 9.1 on end + end + chip drivers/pci/onboard + device pci a.0 on end # Adaptic + device pci a.1 on end + end + end + device pci 0.1 on end + device pci 1.0 on end + device pci 1.1 on end + end + chip southbridge/amd/amd8111 + # this "device pci 0.0" is the parent the next one + # PCI bridge + device pci 0.0 on + device pci 0.0 on end + device pci 0.1 on end + device pci 0.2 off end + device pci 1.0 off end + chip drivers/pci/onboard + device pci 5.0 on end # SiI + end + chip drivers/pci/onboard + device pci 6.0 on end + register "rom_address" = "0xfff80000" + end + end + device pci 1.0 on + chip superio/winbond/w83627hf + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on end + device pci 1.2 on end + device pci 1.3 on + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 57 on end + end + chip drivers/i2c/adm1027 # ADT7463A CPU0/1 temp, CPU1 vid, SYS FAN 1/2/3 + device i2c 2d on end + end + chip drivers/generic/generic # Winbond HWM 0x54 CPU0/1 VRM temp, SYSFAN 4,CPU0 vid, CPU0/1 FAN + device i2c 2a on end + end + chip drivers/generic/generic # Winbond HWM 0x92 + device i2c 49 on end + end + chip drivers/generic/generic # Winbond HWM 0x94 + device i2c 4a on end + end + end # acpi + device pci 1.5 off end + device pci 1.6 off end + register "ide0_enable" = "1" + register "ide1_enable" = "1" + end + end # device pci 18.0 + + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end + diff --git a/src/mainboard/tyan/s2882/devicetree.cb b/src/mainboard/tyan/s2882/devicetree.cb new file mode 100644 index 0000000000..3c18bb6fd2 --- /dev/null +++ b/src/mainboard/tyan/s2882/devicetree.cb @@ -0,0 +1,135 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_940 + device apic 0 on end + end + end + + device pci_domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on # northbridge + # devices on link 0, link 0 == LDT 0 + chip southbridge/amd/amd8131 + # the on/off keyword is mandatory + device pci 0.0 on + chip drivers/pci/onboard + device pci 6.0 on end # adaptec + device pci 6.1 on end + end + chip drivers/pci/onboard + device pci 9.0 on end # broadcom 5704 + device pci 9.1 on end + end + end + device pci 0.1 on end + device pci 1.0 on end + device pci 1.1 on end + end + chip southbridge/amd/amd8111 + # this "device pci 0.0" is the parent the next one + # PCI bridge + device pci 0.0 on + device pci 0.0 on end + device pci 0.1 on end + device pci 0.2 off end + device pci 1.0 off end + chip drivers/pci/onboard + device pci 5.0 on end + end + # chip drivers/ati/ragexl + chip drivers/pci/onboard + device pci 6.0 on end + register "rom_address" = "0xfff00000" + end + chip drivers/pci/onboard + device pci 8.0 on end #intel 10/100 + end + end + device pci 1.0 on + chip superio/winbond/w83627hf + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on end + device pci 1.2 on end + device pci 1.3 on end + device pci 1.3 on +# chip drivers/generic/generic #dimm 0-0-0 +# device i2c 50 on end +# end +# chip drivers/generic/generic #dimm 0-0-1 +# device i2c 51 on end +# end +# chip drivers/generic/generic #dimm 0-1-0 +# device i2c 52 on end +# end +# chip drivers/generic/generic #dimm 0-1-1 +# device i2c 53 on end +# end +# chip drivers/generic/generic #dimm 1-0-0 +# device i2c 54 on end +# end +# chip drivers/generic/generic #dimm 1-0-1 +# device i2c 55 on end +# end +# chip drivers/generic/generic #dimm 1-1-0 +# device i2c 56 on end +# end +# chip drivers/generic/generic #dimm 1-1-1 +# device i2c 57 on end +# end + end # acpi + device pci 1.5 off end + device pci 1.6 off end + register "ide0_enable" = "1" + register "ide1_enable" = "1" + end + end # device pci 18.0 + + device pci 18.0 on end + device pci 18.0 on end + + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end # NB + end #pci_domain +end + diff --git a/src/mainboard/tyan/s2885/devicetree.cb b/src/mainboard/tyan/s2885/devicetree.cb new file mode 100644 index 0000000000..8a981500f1 --- /dev/null +++ b/src/mainboard/tyan/s2885/devicetree.cb @@ -0,0 +1,135 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_940 + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on # LDT0 + chip southbridge/amd/amd8151 + # the on/off keyword is mandatory + device pci 0.0 on end + device pci 1.0 on end + end + end + device pci 18.0 on end # LDT1 + device pci 18.0 on # northbridge + # devices on link 2, link 2 == LDT 2 + chip southbridge/amd/amd8131 + # the on/off keyword is mandatory + device pci 0.0 on + chip drivers/pci/onboard + device pci 9.0 on end # broadcom 5703 + end + end + device pci 0.1 on end + device pci 1.0 on end + device pci 1.1 on end + end + chip southbridge/amd/amd8111 + # this "device pci 0.0" is the parent the next one + # PCI bridge + device pci 0.0 on + device pci 0.0 on end + device pci 0.1 on end + device pci 0.2 off end + device pci 1.0 off end + chip drivers/pci/onboard + device pci b.0 on end # SiI 3114 + end + end + device pci 1.0 on + chip superio/winbond/w83627hf + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on end + device pci 1.2 on end + device pci 1.3 on + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 57 on end + end + end # acpi + device pci 1.5 on end + device pci 1.6 off end + register "ide0_enable" = "1" + register "ide1_enable" = "1" + end + end # device pci 18.0 + + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + + end #pci_domain + +# chip drivers/generic/debug +# device pnp 0.0 off end +# device pnp 0.1 off end +# device pnp 0.2 off end +# device pnp 0.3 off end +# device pnp 0.4 off end +# device pnp 0.5 on end +# end +end + diff --git a/src/mainboard/tyan/s2891/devicetree.cb b/src/mainboard/tyan/s2891/devicetree.cb new file mode 100644 index 0000000000..6f04732028 --- /dev/null +++ b/src/mainboard/tyan/s2891/devicetree.cb @@ -0,0 +1,158 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_940 + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 #mc0 + device pci 18.0 on # northbridge + # devices on link 0, link 0 == LDT 0 + chip southbridge/nvidia/ck804 + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627hf + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b off # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 +# chip drivers/generic/generic #dimm 0-0-0 +# device i2c 50 on end +# end +# chip drivers/generic/generic #dimm 0-0-1 +# device i2c 51 on end +# end +# chip drivers/generic/generic #dimm 0-1-0 +# device i2c 52 on end +# end +# chip drivers/generic/generic #dimm 0-1-1 +# device i2c 53 on end +# end +# chip drivers/generic/generic #dimm 1-0-0 +# device i2c 54 on end +# end +# chip drivers/generic/generic #dimm 1-0-1 +# device i2c 55 on end +# end +# chip drivers/generic/generic #dimm 1-1-0 +# device i2c 56 on end +# end +# chip drivers/generic/generic #dimm 1-1-1 +# device i2c 57 on end +# end + end # SM +# device pci 1.1 on # SM 1 +# chip drivers/i2c/adm1027 # ADT7463A CPU0 temp, SYS FAN 2/3/4 +# device i2c 2d on end +# end +# chip drivers/i2c/adm1027 # ADT7463A CPU1 temp, CPU0/1 FAN , SYS FAN 1/5 +# device i2c 2e on end +# end +# chip drivers/generic/generic # Winbond HWM 0x54 CPU0/1 VRM temp, SYSFAN 6/7, SB FAN +# device i2c 2a on end +# end +# chip drivers/generic/generic # Winbond HWM 0x92 +# device i2c 49 on end +# end +# chip drivers/generic/generic # Winbond HWM 0x94 +# device i2c 4a on end +# end +# end #SM + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 off end # ACI + device pci 4.1 off end # MCI + device pci 6.0 on end # IDE + device pci 7.0 on end # SATA 1 + device pci 8.0 on end # SATA 0 + device pci 9.0 on # PCI + # chip drivers/ati/ragexl + chip drivers/pci/onboard + device pci 7.0 on end + #register "rom_address" = "0xfff80000" #for 512K + register "rom_address" = "0xfff00000" #for 1M + end + end + device pci a.0 off end # NIC + device pci b.0 off end # PCI E 3 + device pci c.0 off end # PCI E 2 + device pci d.0 on end # PCI E 1 + device pci e.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + end + end # device pci 18.0 + device pci 18.0 on end # Link 1 + device pci 18.0 on + # devices on link 2, link 2 == LDT 2 + chip southbridge/amd/amd8131 + # the on/off keyword is mandatory + device pci 0.0 on end + device pci 0.1 on end + device pci 1.0 on + chip drivers/pci/onboard + device pci 9.0 on end + device pci 9.1 on end + end + end + device pci 1.1 on end + end + end # device pci 18.0 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end #mc0 + + end # pci_domain + +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 off end # pci_regs_all +# device pnp 0.2 off end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 off end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# device pnp 0.8 on end # hard_reset +# end +end # root_complex diff --git a/src/mainboard/tyan/s2892/devicetree.cb b/src/mainboard/tyan/s2892/devicetree.cb new file mode 100644 index 0000000000..b7b13b5a6f --- /dev/null +++ b/src/mainboard/tyan/s2892/devicetree.cb @@ -0,0 +1,158 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_940 + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 #mc0 + device pci 18.0 on # northbridge + # devices on link 0, link 0 == LDT 0 + chip southbridge/nvidia/ck804 + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627hf + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 57 on end + end + end # SM + device pci 1.1 on # SM 1 + chip drivers/i2c/adm1027 # ADT7463A CPU0 temp, SYS FAN 2/3/4 + device i2c 2d on end + end + chip drivers/i2c/adm1027 # ADT7463A CPU1 temp, CPU0/1 FAN , SYS FAN 1/5 + device i2c 2e on end + end + chip drivers/generic/generic # Winbond HWM 0x54 CPU0/1 VRM temp, SYSFAN 6/7, SB FAN + device i2c 2a on end + end + chip drivers/generic/generic # Winbond HWM 0x92 + device i2c 49 on end + end + chip drivers/generic/generic # Winbond HWM 0x94 + device i2c 4a on end + end + end #SM + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 off end # ACI + device pci 4.1 off end # MCI + device pci 6.0 on end # IDE + device pci 7.0 on end # SATA 1 + device pci 8.0 on end # SATA 0 + device pci 9.0 on # PCI + # chip drivers/ati/ragexl + chip drivers/pci/onboard + device pci 6.0 on end + register "rom_address" = "0xfff80000" + end + chip drivers/pci/onboard + device pci 8.0 on end + end + end + device pci a.0 off end # NIC + device pci b.0 off end # PCI E 3 + device pci c.0 off end # PCI E 2 + device pci d.0 on end # PCI E 1 + device pci e.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + end + end # device pci 18.0 + device pci 18.0 on end # Link 1 + device pci 18.0 on + # devices on link 2, link 2 == LDT 2 + chip southbridge/amd/amd8131 + # the on/off keyword is mandatory + device pci 0.0 on end + device pci 0.1 on end + device pci 1.0 on + chip drivers/pci/onboard + device pci 9.0 on end # broadcom 5704 + device pci 9.1 on end + end + end + device pci 1.1 on end + end + end # device pci 18.0 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end #mc0 + + end # pci_domain + +# chip drivers/generic/debug +# device pnp 0.0 off end +# device pnp 0.1 off end +# device pnp 0.2 off end +# device pnp 0.3 off end +# device pnp 0.4 off end +# device pnp 0.5 on end +# end +end # root_complex diff --git a/src/mainboard/tyan/s2895/devicetree.cb b/src/mainboard/tyan/s2895/devicetree.cb new file mode 100644 index 0000000000..8ff77ee57e --- /dev/null +++ b/src/mainboard/tyan/s2895/devicetree.cb @@ -0,0 +1,173 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_940 + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 #mc0 + device pci 18.0 on # northbridge + # devices on link 0, link 0 == LDT 0 + chip southbridge/nvidia/ck804 + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/smsc/lpc47b397 + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.3 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 4 + end + device pnp 2e.4 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.5 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.7 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.8 on # HW Monitor + io 0x60 = 0x480 + chip drivers/generic/generic # LM95221 CPU temp + device i2c 2b on end + end + chip drivers/generic/generic # EMCT03 + device i2c 54 on end + end + end + device pnp 2e.a on # RT + io 0x60 = 0x400 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 57 on end + end + end # SM + device pci 1.1 on # SM 1 + chip drivers/generic/generic #MAC EEPROM + device i2c 51 on end + end + + end # SM + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # ACI + device pci 4.1 off end # MCI + device pci 6.0 on end # IDE + device pci 7.0 on end # SATA 1 + device pci 8.0 on end # SATA 0 + device pci 9.0 on end # PCI + device pci a.0 on end # NIC + device pci b.0 off end # PCI E 3 + device pci c.0 off end # PCI E 2 + device pci d.0 off end # PCI E 1 + device pci e.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" +# register "nic_rom_address" = "0xfff80000" # 64k +# register "raid_rom_address" = "0xfff90000" + register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_addr" = "0x51" + end + end # device pci 18.0 + device pci 18.0 on end # Link 1 + device pci 18.0 on + # devices on link 2, link 2 == LDT 2 + chip southbridge/amd/amd8131 + # the on/off keyword is mandatory + device pci 0.0 on end + device pci 0.1 on end + device pci 1.0 on + chip drivers/pci/onboard + device pci 6.0 on end # lsi scsi + device pci 6.1 on end + end + end + device pci 1.1 on end + end + end # device pci 18.0 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end #mc0 + + chip northbridge/amd/amdk8 + device pci 19.0 on # northbridge + # devices on link 0, link 0 == LDT 0 + chip southbridge/nvidia/ck804 + device pci 0.0 on end # HT + device pci 1.0 on end # LPC + device pci 1.1 off end # SM + device pci 2.0 off end # USB 1.1 + device pci 2.1 off end # USB 2 + device pci 4.0 off end # ACI + device pci 4.1 off end # MCI + device pci 6.0 off end # IDE + device pci 7.0 off end # SATA 1 + device pci 8.0 off end # SATA 0 + device pci 9.0 off end # PCI + device pci a.0 on end # NIC + device pci b.0 off end # PCI E 3 + device pci c.0 off end # PCI E 2 + device pci d.0 off end # PCI E 1 + device pci e.0 on end # PCI E 0 +# register "nic_rom_address" = "0xfff80000" # 64k + register "mac_eeprom_smbus" = "3" + register "mac_eeprom_addr" = "0x51" + end + end # device pci 19.0 + + device pci 19.0 on end + device pci 19.0 on end + device pci 19.1 on end + device pci 19.2 on end + device pci 19.3 on end + end + end # PCI domain + +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 off end # pci_regs_all +# device pnp 0.2 off end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 on end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# end +end # root_complex diff --git a/src/mainboard/tyan/s2912/devicetree.cb b/src/mainboard/tyan/s2912/devicetree.cb new file mode 100644 index 0000000000..530d06b107 --- /dev/null +++ b/src/mainboard/tyan/s2912/devicetree.cb @@ -0,0 +1,150 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_F + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 #mc0 + device pci 18.0 on end + device pci 18.0 on end + device pci 18.0 on + # devices on link 0, link 0 == LDT 0 + chip southbridge/nvidia/mcp55 + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627hf + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # SFI + io 0x62 = 0x100 + end + device pnp 2e.7 off # GPIO_GAME_MIDI + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # WDTO_PLED + device pnp 2e.9 off end # GPIO_SUSLED + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 57 on end + end + end # SM + device pci 1.1 on # SM 1 +#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus? +# chip drivers/generic/generic #PCIXA Slot1 +# device i2c 50 on end +# end +# chip drivers/generic/generic #PCIXB Slot1 +# device i2c 51 on end +# end +# chip drivers/generic/generic #PCIXB Slot2 +# device i2c 52 on end +# end +# chip drivers/generic/generic #PCI Slot1 +# device i2c 53 on end +# end +# chip drivers/generic/generic #Master MCP55 PCI-E +# device i2c 54 on end +# end +# chip drivers/generic/generic #Slave MCP55 PCI-E +# device i2c 55 on end +# end + chip drivers/generic/generic #MAC EEPROM + device i2c 51 on end + end + + end # SM + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on end # PCI + device pci 6.1 off end # AZA + device pci 8.0 on end # NIC + device pci 9.0 on end # NIC + device pci a.0 on end # PCI E 5 + device pci b.0 off end # PCI E 4 + device pci c.0 off end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 off end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_addr" = "0x51" + end + end # device pci 18.0 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end # mc0 + + end # PCI domain + +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 on end # pci_regs_all +# device pnp 0.2 on end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 on end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# device pnp 0.8 off end # io +# device pnp 0.9 off end # io +# end +end #root_complex diff --git a/src/mainboard/tyan/s2912_fam10/devicetree.cb b/src/mainboard/tyan/s2912_fam10/devicetree.cb new file mode 100644 index 0000000000..d02b81c2fd --- /dev/null +++ b/src/mainboard/tyan/s2912_fam10/devicetree.cb @@ -0,0 +1,156 @@ +chip northbridge/amd/amdfam10/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_F_1207 + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdfam10 #mc0 + device pci 18.0 on end + device pci 18.0 on end + device pci 18.0 on + # SB on link 2.0. + chip southbridge/nvidia/mcp55 + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627hf + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # SFI + io 0x62 = 0x100 + end + device pnp 2e.7 off # GPIO_GAME_MIDI + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # WDTO_PLED + device pnp 2e.9 off end # GPIO_SUSLED + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 57 on end + end + end # SM + device pci 1.1 on # SM 1 +#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus? +# chip drivers/generic/generic #PCIXA Slot1 +# device i2c 50 on end +# end +# chip drivers/generic/generic #PCIXB Slot1 +# device i2c 51 on end +# end +# chip drivers/generic/generic #PCIXB Slot2 +# device i2c 52 on end +# end +# chip drivers/generic/generic #PCI Slot1 +# device i2c 53 on end +# end +# chip drivers/generic/generic #Master MCP55 PCI-E +# device i2c 54 on end +# end +# chip drivers/generic/generic #Slave MCP55 PCI-E +# device i2c 55 on end +# end + chip drivers/generic/generic #MAC EEPROM + device i2c 51 on end + end + + end # SM + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on + chip drivers/pci/onboard + device pci 4.0 on end + register "rom_address" = "0xfff00000" + end + end # PCI + device pci 6.1 off end # AZA + device pci 8.0 on end # NIC + device pci 9.0 on end # NIC + device pci a.0 on end # PCI E 5 + device pci b.0 off end # PCI E 4 + device pci c.0 off end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 off end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_addr" = "0x51" + end + end # device pci 18.0 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + end # mc0 + + end # PCI domain + +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 on end # pci_regs_all +# device pnp 0.2 on end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 on end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# device pnp 0.8 off end # io +# device pnp 0.9 off end # io +# end +end #root_complex diff --git a/src/mainboard/tyan/s4880/devicetree.cb b/src/mainboard/tyan/s4880/devicetree.cb new file mode 100644 index 0000000000..7dec1bcd10 --- /dev/null +++ b/src/mainboard/tyan/s4880/devicetree.cb @@ -0,0 +1,103 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_940 + device apic 0 on end + end + end + + device pci_domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on end # LDT0 + device pci 18.0 on end # LDT1 + device pci 18.0 on # northbridge + # devices on link 2, link 2 == LDT 2 + chip southbridge/amd/amd8131 + # the on/off keyword is mandatory + device pci 0.0 on +# chip drivers/lsi/53c1030 +# device pci 4.0 on end +# device pci 4.1 on end +# register "fw_address" = "0xfff8c000" +# end + chip drivers/pci/onboard + device pci 9.0 on end + device pci 9.1 on end + end + end + device pci 0.1 on end + device pci 1.0 on end + device pci 1.1 on end + end + chip southbridge/amd/amd8111 + # this "device pci 0.0" is the parent the next one + # PCI bridge + device pci 0.0 on + device pci 0.0 on end + device pci 0.1 on end + device pci 0.2 off end + device pci 1.0 off end + chip drivers/pci/onboard + device pci 6.0 on end + register "rom_address" = "0xfff80000" + end + end + device pci 1.0 on + chip superio/winbond/w83627hf + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on end + device pci 1.2 on end + device pci 1.3 on end + device pci 1.5 off end + device pci 1.6 off end + register "ide0_enable" = "1" + register "ide1_enable" = "1" + end + end # device pci 18.0 + + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + + end #pci_domain +end + diff --git a/src/mainboard/tyan/s4882/devicetree.cb b/src/mainboard/tyan/s4882/devicetree.cb new file mode 100644 index 0000000000..1524a845c1 --- /dev/null +++ b/src/mainboard/tyan/s4882/devicetree.cb @@ -0,0 +1,211 @@ +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_940 + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on end # LDT0 + device pci 18.0 on # northbridge + # devices on link 1, link 1 == LDT 1 + chip southbridge/amd/amd8131 + # the on/off keyword is mandatory + device pci 0.0 on +# chip drivers/lsi/53c1030 +# device pci 4.0 on end +# device pci 4.1 on end +# register "fw_address" = "0xfff8c000" +# end + chip drivers/pci/onboard + device pci 9.0 on end #Broadcom + device pci 9.1 on end + end + end + device pci 0.1 on end + device pci 1.0 on end + device pci 1.1 on end + end + chip southbridge/amd/amd8111 + # this "device pci 0.0" is the parent the next one + # PCI bridge + device pci 0.0 on + device pci 0.0 on end + device pci 0.1 on end + device pci 0.2 off end + device pci 1.0 off end + #chip drivers/ati/ragexl + chip drivers/pci/onboard + device pci 6.0 on end + register "rom_address" = "0xfff80000" + end + chip drivers/pci/onboard + device pci 5.0 on end #SiI + end + end + device pci 1.0 on + chip superio/winbond/w83627hf + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on end + device pci 1.2 on end + device pci 1.3 on +# chip drivers/i2c/i2cmux # pca9556 smbus mux +# device i2c 18 on #0 pca9516 2, 1 +# chip drivers/i2c/lm63 #cpu0 temp +# device i2c 4c on end +# end +# end +# device i2c 18 on #1 pca9516 1, 1 +# chip drivers/generic/generic #dimm 1-0-0 +# device i2c 50 on end +# end +# chip drivers/generic/generic #dimm 1-0-1 +# device i2c 51 on end +# end +# chip drivers/generic/generic #dimm 1-1-0 +# device i2c 52 on end +# end +# chip drivers/generic/generic #dimm 1-1-1 +# device i2c 53 on end +# end +# end +# device i2c 18 on #2 pca9516 1, 2 +# chip drivers/generic/generic #dimm 0-0-0 +# device i2c 50 on end +# end +# chip drivers/generic/generic #dimm 0-0-1 +# device i2c 51 on end +# end +# chip drivers/generic/generic #dimm 0-1-0 +# device i2c 52 on end +# end +# chip drivers/generic/generic #dimm 0-1-1 +# device i2c 53 on end +# end +# end +# device i2c 18 on #3 pca9516 1, 3 +# chip drivers/generic/generic #dimm 3-0-0 +# device i2c 50 on end +# end +# chip drivers/generic/generic #dimm 3-0-1 +# device i2c 51 on end +# end +# chip drivers/generic/generic #dimm 3-1-0 +# device i2c 52 on end +# end +# chip drivers/generic/generic #dimm 3-1-1 +# device i2c 53 on end +# end +# end +# device i2c 18 on #4 pca9516 1, 4 +# chip drivers/generic/generic #dimm 2-0-0 +# device i2c 50 on end +# end +# chip drivers/generic/generic #dimm 2-0-1 +# device i2c 51 on end +# end +# chip drivers/generic/generic #dimm 2-1-0 +# device i2c 52 on end +# end +# chip drivers/generic/generic #dimm 2-1-1 +# device i2c 53 on end +# end +# end +# device i2c 18 on #5 pca9516 2, 2 +# chip drivers/i2c/lm63 #cpu1 temp +# device i2c 4c on end +# end +# end +# device i2c 18 on #6 pca9516 2, 3 +# chip drivers/i2c/lm63 #cpu2 temp +# device i2c 4c on end +# end +# end +# device i2c 18 on #7 pca9516 2, 4 +# chip drivers/i2c/lm63 #cpu3 temp +# device i2c 4c on end +# end +# end +# end # i2cmux +# chip drivers/i2c/adm1027 # ADM1027 CPU1 vid and System FAN... +# device i2c 2e on end +# end +# chip drivers/generic/generic # Winbond HWM 0x54 CPU0 vid +# device i2c 2a on end +# end +# chip drivers/generic/generic # Winbond HWM 0x92 +# device i2c 49 on end +# end +# chip drivers/generic/generic # Winbond HWM 0x94 +# device i2c 4a on end +# end +# chip drivers/generic/generic # ?? +# device i2c 69 on end +# end + end # acpi + device pci 1.5 off end + device pci 1.6 off end + register "ide0_enable" = "1" + register "ide1_enable" = "1" + end + end # device pci 18.0 + + device pci 18.0 on end + + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + + end +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 off end # pci_regs_all +# device pnp 0.2 off end # mem +# device pnp 0.3 on end # cpuid +# device pnp 0.4 off end # smbus_regs_all +# device pnp 0.5 on end # dual core msr +# device pnp 0.6 on end # cache size +# device pnp 0.7 on end # tsc +# end +end + diff --git a/src/mainboard/via/Kconfig b/src/mainboard/via/Kconfig new file mode 100644 index 0000000000..ba0f11b082 --- /dev/null +++ b/src/mainboard/via/Kconfig @@ -0,0 +1,37 @@ +choice + prompt "Mainboard model" + depends on VENDOR_VIA + +config BOARD_VIA_VT8454C + bool "vt8454c" + select ARCH_X86 + select CPU_VIA_C7 + select NORTHBRIDGE_VIA_CX700 +# select SOUTHBRIDGE_INTEL_I82801GX + select SUPERIO_VIA_VT1211 + select PIRQ_TABLE +# select MMCONF_SUPPORT + select USE_PRINTK_IN_CAR + help + Kontron 986LCD-M Series mainboards +endchoice + +config MAINBOARD_DIR + string + default via/vt8454c + depends on BOARD_VIA_VT8454C + +config DCACHE_RAM_BASE + hex + default 0xffef0000 + depends on BOARD_VIA_VT8454C + +config DCACHE_RAM_SIZE + hex + default 0x8000 + depends on BOARD_VIA_VT8454C + +config MAINBOARD_PART_NUMBER + string + default "VT8454C" + depends on BOARD_VIA_VT8454C diff --git a/src/mainboard/via/epia-cn/devicetree.cb b/src/mainboard/via/epia-cn/devicetree.cb new file mode 100644 index 0000000000..64252394b2 --- /dev/null +++ b/src/mainboard/via/epia-cn/devicetree.cb @@ -0,0 +1,61 @@ +chip northbridge/via/cn700 # Northbridge + device pci_domain 0 on # PCI domain + device pci 0.0 on end # AGP Bridge + device pci 0.1 on end # Error Reporting + device pci 0.2 on end # Host Bus Control + device pci 0.3 on end # Memory Controller + device pci 0.4 on end # Power Management + device pci 0.7 on end # V-Link Controller + device pci 1.0 on end # PCI Bridge + chip southbridge/via/vt8237r # Southbridge + # Enable both IDE channels. + register "ide0_enable" = "1" + register "ide1_enable" = "1" + # Both cables are 40pin. + register "ide0_80pin_cable" = "0" + register "ide1_80pin_cable" = "0" + device pci f.0 on end # IDE + register "fn_ctrl_lo" = "0x80" + register "fn_ctrl_hi" = "0x1d" + device pci 10.0 on end # OHCI + device pci 10.1 on end # OHCI + device pci 10.2 on end # OHCI + device pci 10.3 on end # OHCI + device pci 10.4 on end # EHCI + device pci 10.5 on end # UDCI + device pci 11.0 on # Southbridge LPC + chip superio/via/vt1211 # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.b on # HWM + io 0x60 = 0xec00 + end + end + end + device pci 11.5 on end # AC'97 audio + # device pci 11.6 off end # AC'97 Modem + device pci 12.0 on end # Ethernet + end + end + device apic_cluster 0 on # APIC cluster + chip cpu/via/model_c7 # VIA C7 + device apic 0 on end # APIC + end + end +end diff --git a/src/mainboard/via/epia-m/devicetree.cb b/src/mainboard/via/epia-m/devicetree.cb new file mode 100644 index 0000000000..2b9abec3da --- /dev/null +++ b/src/mainboard/via/epia-m/devicetree.cb @@ -0,0 +1,57 @@ +chip northbridge/via/vt8623 + + device apic_cluster 0 on + chip cpu/via/model_c3 + device apic 0 on end + end + end + + device pci_domain 0 on + chip southbridge/via/vt8235 + + device pci 10.0 on end # USB 1.1 + device pci 10.1 on end # USB 1.1 + device pci 10.2 on end # USB 1.1 + device pci 10.3 on end # USB 2 + + device pci 11.0 on # Southbridge + chip superio/via/vt1211 + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.b on # HWM + io 0x60 = 0xec00 + end + + end + end + + device pci 11.1 on end # IDE + # 2-4 non existant? + device pci 11.5 on end # AC97 Audio + device pci 11.6 off end # AC97 Modem + device pci 12.0 on end # Ethernet + end +# This is on the EPIA MII, not the M. + chip southbridge/ricoh/rl5c476 + register "enable_cf" = "1" + device pci 0a.0 on end + device pci 0a.1 on end + end + end +end diff --git a/src/mainboard/via/epia-m700/devicetree.cb b/src/mainboard/via/epia-m700/devicetree.cb new file mode 100644 index 0000000000..008399a94f --- /dev/null +++ b/src/mainboard/via/epia-m700/devicetree.cb @@ -0,0 +1,24 @@ +chip northbridge/via/vx800 # Northbridge + device pci_domain 0 on + device pci 0.0 on end # AGP Bridge + device pci 0.1 on end # Error Reporting + device pci 0.2 on end # Host Bus Control + device pci 0.3 on end # Memory Controller + device pci 0.4 on end # Power Management + device pci 0.7 on end # V-Link Controller + device pci 1.0 on end # PCI Bridge + # device pci f.0 on end # IDE/SATA + # device pci f.1 on end # IDE + # device pci 10.0 on end # USB 1.1 + # device pci 10.1 on end # USB 1.1 + # device pci 10.2 on end # USB 1.1 + # device pci 10.4 on end # USB 2.0 + # device pci 11.0 on # Southbridge LPC + # end + end + device apic_cluster 0 on # APIC cluster + chip cpu/via/model_c7 # VIA C7 + device apic 0 on end # APIC + end + end +end diff --git a/src/mainboard/via/epia/devicetree.cb b/src/mainboard/via/epia/devicetree.cb new file mode 100644 index 0000000000..b75ee5881a --- /dev/null +++ b/src/mainboard/via/epia/devicetree.cb @@ -0,0 +1,65 @@ +chip northbridge/via/vt8601 + device pci_domain 0 on + device pci 0.0 on end # Northbridge +# device pci 0.1 on # AGP bridge + # chip drivers/pci/onboard # Integrated VGA + # device pci 0.0 on end + # register "rom_adress" = "0xfff80000" + # end +# end + chip southbridge/via/vt8231 + register "enable_native_ide" = "0" + register "enable_com_ports" = "1" + register "enable_keyboard" = "0" + device pci 11.0 on # Southbrdge + chip superio/winbond/w83627hf + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + register "com1" = "{CONFIG_TTYS0_BAUD}" + end + device pnp 2e.6 off end # CIR + device pnp 2e.7 off end # GAME_MIDI_GIPO1 + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + end + end + device pci 11.1 on end # Ide + device pci 11.2 off end # Usb port 0-1 + device pci 11.3 off end # Usb port 2-3 + device pci 11.4 off end # ACPI + device pci 11.5 off end # AC97 Audio + device pci 11.6 on end # AC97 Modem + device pci 12.0 on end # Ethernet + end + end + + device apic_cluster 0 on + chip cpu/via/model_c3 + device apic 0 on end + end + end +end diff --git a/src/mainboard/via/pc2500e/devicetree.cb b/src/mainboard/via/pc2500e/devicetree.cb new file mode 100644 index 0000000000..c03d00072a --- /dev/null +++ b/src/mainboard/via/pc2500e/devicetree.cb @@ -0,0 +1,88 @@ +chip northbridge/via/cn700 # Northbridge + device pci_domain 0 on # PCI domain + device pci 0.0 on end # AGP Bridge + device pci 0.1 on end # Error Reporting + device pci 0.2 on end # Host Bus Control + device pci 0.3 on end # Memory Controller + device pci 0.4 on end # Power Management + device pci 0.7 on end # V-Link Controller + device pci 1.0 on end # PCI Bridge + chip southbridge/via/vt8237r # Southbridge + # Enable both IDE channels. + register "ide0_enable" = "1" + register "ide1_enable" = "1" + # Both cables are 40pin. + register "ide0_80pin_cable" = "0" + register "ide1_80pin_cable" = "0" + device pci f.0 on end # SATA + device pci f.1 on end # IDE + register "fn_ctrl_lo" = "0x80" + register "fn_ctrl_hi" = "0x1d" + device pci 10.0 on end # UHCI + device pci 10.1 on end # UHCI + device pci 10.2 on end # UHCI + device pci 10.3 on end # UHCI + device pci 10.4 on end # EHCI + device pci 10.5 on end # UDCI + device pci 11.0 on # Southbridge LPC + chip superio/ite/it8716f # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # COM2 (N/A on this board) + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.4 on # Environment controller + io 0x60 = 0x290 + io 0x62 = 0x0000 + irq 0x70 = 9 + end + device pnp 2e.5 off # PS/2 keyboard (not used) + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 off # PS/2 mouse (not used) + irq 0x70 = 12 + end + device pnp 2e.7 on # GPIO + io 0x60 = 0x0000 + io 0x62 = 0x0800 + io 0x64 = 0x0000 + end + device pnp 2e.8 off # MIDI port (N/A) + io 0x60 = 0x300 + irq 0x70 = 10 + end + device pnp 2e.9 off # Game port (N/A) + io 0x60 = 0x201 + end + device pnp 2e.a on # Consumer IR + io 0x60 = 0x310 + irq 0x70 = 11 + end + end + end + device pci 11.5 on end # AC'97 audio + # device pci 11.6 off end # AC'97 modem (N/A) + device pci 12.0 on end # Ethernet + end + end + device apic_cluster 0 on # APIC cluster + chip cpu/via/model_c7 # VIA C7 + device apic 0 on end # APIC + end + end +end diff --git a/src/mainboard/via/vt8454c/Makefile.inc b/src/mainboard/via/vt8454c/Makefile.inc new file mode 100644 index 0000000000..d74c632497 --- /dev/null +++ b/src/mainboard/via/vt8454c/Makefile.inc @@ -0,0 +1,64 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2009 coresystems GmbH +## +## This program is free software; you can redistribute it and/or +## modify it under the terms of the GNU General Public License as +## published by the Free Software Foundation; version 2 of +## the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +## MA 02110-1301 USA +## + +## +## This mainboard requires DCACHE_AS_RAM enabled. It won't work without. +## + +driver-y += mainboard.o + +obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o +obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o +obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o +obj-$(CONFIG_HAVE_ACPI_TABLES) += fadt.o + +initobj-y += crt0.o +# FIXME in $(top)/Makefile +crt0-y += ../../../../src/cpu/x86/16bit/entry16.inc +crt0-y += ../../../../src/cpu/x86/32bit/entry32.inc +crt0-y += ../../../../src/cpu/x86/16bit/reset16.inc +crt0-y += ../../../../src/arch/i386/lib/id.inc +crt0-y += ../../../../src/cpu/via/car/cache_as_ram.inc +crt0-y += auto.inc + +ldscript-y += ../../../../src/arch/i386/init/ldscript_fallback_cbfs.lb +ldscript-y += ../../../../src/cpu/x86/16bit/entry16.lds +ldscript-y += ../../../../src/cpu/x86/16bit/reset16.lds +ldscript-y += ../../../../src/arch/i386/lib/id.lds +ldscript-y += ../../../../src/arch/i386/lib/failover.lds + +ifdef POST_EVALUATION + +$(obj)/dsdt.c: $(src)/mainboard/$(MAINBOARDDIR)/dsdt.asl + iasl -p dsdt -tc $(src)/mainboard/$(MAINBOARDDIR)/dsdt.asl + mv dsdt.hex $@ + +$(obj)/mainboard/$(MAINBOARDDIR)/dsdt.o: $(obj)/dsdt.c + $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c $< -o $@ + +$(obj)/mainboard/$(MAINBOARDDIR)/auto.inc: $(src)/mainboard/$(MAINBOARDDIR)/auto.c $(obj)/option_table.h + $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c -S $(src)/mainboard/$(MAINBOARDDIR)/auto.c -o $@ + perl -e 's/\.rodata/.rom.data/g' -pi $@ + perl -e 's/\.text/.section .rom.text/g' -pi $@ + +endif + diff --git a/src/mainboard/via/vt8454c/devicetree.cb b/src/mainboard/via/vt8454c/devicetree.cb new file mode 100644 index 0000000000..02f9514984 --- /dev/null +++ b/src/mainboard/via/vt8454c/devicetree.cb @@ -0,0 +1,59 @@ +chip northbridge/via/cx700 + device apic_cluster 0 on + chip cpu/via/model_c7 + device apic 0 on end + end + end + device pci_domain 0 on + device pci 0.0 on end # AGP Bridge + device pci 0.1 on end # Error Reporting + device pci 0.2 on end # Host Bus Control + device pci 0.3 on end # Memory Controller + device pci 0.4 on end # Power Management + device pci 0.7 on end # V-Link Controller + device pci 1.0 on # PCI Bridge + chip drivers/pci/onboard + device pci 0.0 on end + #register "rom_address" = "0xfffc0000" #256k image + register "rom_address" = "0xfff80000" #512k image + #register "rom_address" = "0xfff00000" #1024k image + end # Onboard Video + end # PCI Bridge + device pci f.0 on end # IDE/SATA + #device pci f.1 on end # IDE + device pci 10.0 on end # USB 1.1 + device pci 10.1 on end # USB 1.1 + device pci 10.2 on end # USB 1.1 + device pci 10.4 on end # USB 2.0 + device pci 11.0 on # Southbridge LPC + chip superio/via/vt1211 + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.b on # HWM + io 0x60 = 0xec00 + end + end # superio + end # pci 11.0 + # 1-4 non existant + #device pci 11.5 on end # AC97 Audio + #device pci 11.6 off end # AC97 Modem + #device pci 12.0 on end # Ethernet + end # pci domain 0 +end # cx700 + diff --git a/src/northbridge/Kconfig b/src/northbridge/Kconfig new file mode 100644 index 0000000000..666ff4d112 --- /dev/null +++ b/src/northbridge/Kconfig @@ -0,0 +1,5 @@ +#source src/northbridge/amd/Kconfig +#source src/northbridge/ibm/Kconfig +source src/northbridge/intel/Kconfig +#source src/northbridge/motorola/Kconfig +source src/northbridge/via/Kconfig diff --git a/src/northbridge/Makefile.inc b/src/northbridge/Makefile.inc new file mode 100644 index 0000000000..8aac9b9401 --- /dev/null +++ b/src/northbridge/Makefile.inc @@ -0,0 +1,5 @@ +#subdirs-y += amd +#subdirs-y += ibm +subdirs-y += intel +#subdirs-y += motorola +subdirs-y += via diff --git a/src/northbridge/amd/Kconfig b/src/northbridge/amd/Kconfig new file mode 100644 index 0000000000..30c9070c8c --- /dev/null +++ b/src/northbridge/amd/Kconfig @@ -0,0 +1,7 @@ +#source src/northbridge/amd/amdfam10/Kconfig +#source src/northbridge/amd/amdht/Kconfig +source src/northbridge/amd/amdk8/Kconfig +#source src/northbridge/amd/amdmct/Kconfig +#source src/northbridge/amd/gx1/Kconfig +#source src/northbridge/amd/gx2/Kconfig +#source src/northbridge/amd/lx/Kconfig diff --git a/src/northbridge/amd/Makefile.inc b/src/northbridge/amd/Makefile.inc new file mode 100644 index 0000000000..06e931482a --- /dev/null +++ b/src/northbridge/amd/Makefile.inc @@ -0,0 +1,8 @@ +subdirs-$(CPU_AMD_K10) += amdfam10 +subdirs-$(CPU_AMD_HT) += amdht +subdirs-$(CPU_AMD_K8) += amdk8 +subdirs-$(CPU_AMD_MCT) += amdmct +subdirs-$(CPU_AMD_GX1) += gx1 +subdirs-$(CPU_AMD_GX2) += gx2 +subdirs-$(CPU_AMD_LX) += lx + diff --git a/src/northbridge/amd/amdk8/Kconfig b/src/northbridge/amd/amdk8/Kconfig new file mode 100644 index 0000000000..171f1f50ee --- /dev/null +++ b/src/northbridge/amd/amdk8/Kconfig @@ -0,0 +1,22 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2007-2009 coresystems GmbH +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +config NORTHBRIDGE_AMD_AMDK8 + bool + default n diff --git a/src/northbridge/amd/amdk8/root_complex/Kconfig b/src/northbridge/amd/amdk8/root_complex/Kconfig new file mode 100644 index 0000000000..a1cd24e108 --- /dev/null +++ b/src/northbridge/amd/amdk8/root_complex/Kconfig @@ -0,0 +1,22 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2007-2009 coresystems GmbH +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +config NORTHBRIDGE_AMD_AMDK8_ROOT_COMPLEX + bool + default n diff --git a/src/northbridge/ibm/Kconfig b/src/northbridge/ibm/Kconfig new file mode 100644 index 0000000000..7f893b0ba0 --- /dev/null +++ b/src/northbridge/ibm/Kconfig @@ -0,0 +1,2 @@ +#source src/northbridge/ibm/cpc710/Kconfig +#source src/northbridge/ibm/cpc925/Kconfig diff --git a/src/northbridge/ibm/Makefile.inc b/src/northbridge/ibm/Makefile.inc new file mode 100644 index 0000000000..aebf07caa0 --- /dev/null +++ b/src/northbridge/ibm/Makefile.inc @@ -0,0 +1,2 @@ +subdirs-y += cpc710 +subdirs-y += cpc925 diff --git a/src/northbridge/intel/Kconfig b/src/northbridge/intel/Kconfig new file mode 100644 index 0000000000..61a832e8d0 --- /dev/null +++ b/src/northbridge/intel/Kconfig @@ -0,0 +1,10 @@ +#source src/northbridge/intel/e7501/Kconfig +#source src/northbridge/intel/e7520/Kconfig +#source src/northbridge/intel/e7525/Kconfig +#source src/northbridge/intel/i3100/Kconfig +#source src/northbridge/intel/i440bx/Kconfig +source src/northbridge/intel/i82810/Kconfig +#source src/northbridge/intel/i82830/Kconfig +#source src/northbridge/intel/i855gme/Kconfig +#source src/northbridge/intel/i855pm/Kconfig +source src/northbridge/intel/i945/Kconfig diff --git a/src/northbridge/intel/Makefile.inc b/src/northbridge/intel/Makefile.inc new file mode 100644 index 0000000000..34ed9aa8ed --- /dev/null +++ b/src/northbridge/intel/Makefile.inc @@ -0,0 +1,10 @@ +#subdirs-y += e7501 +#subdirs-y += e7520 +#subdirs-y += e7525 +#subdirs-y += i3100 +#subdirs-y += i440bx +subdirs-y += i82810 +#subdirs-y += i82830 +#subdirs-y += i855gme +#subdirs-y += i855pm +subdirs-y += i945 diff --git a/src/northbridge/intel/i82810/Kconfig b/src/northbridge/intel/i82810/Kconfig new file mode 100644 index 0000000000..62f3705061 --- /dev/null +++ b/src/northbridge/intel/i82810/Kconfig @@ -0,0 +1,28 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +config HAVE_HIGH_TABLES + bool "Do we have high tables" + default y + +config NORTHBRIDGE_INTEL_I82810 + bool + default n + diff --git a/src/northbridge/intel/i82810/Makefile.inc b/src/northbridge/intel/i82810/Makefile.inc new file mode 100644 index 0000000000..6c8ffe93af --- /dev/null +++ b/src/northbridge/intel/i82810/Makefile.inc @@ -0,0 +1,22 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +driver-$(CONFIG_NORTHBRIDGE_INTEL_I82810) += northbridge.o + diff --git a/src/northbridge/intel/i945/Kconfig b/src/northbridge/intel/i945/Kconfig new file mode 100644 index 0000000000..468602d15e --- /dev/null +++ b/src/northbridge/intel/i945/Kconfig @@ -0,0 +1,22 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2007-2009 coresystems GmbH +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +config NORTHBRIDGE_INTEL_I945 + bool + default n diff --git a/src/northbridge/intel/i945/Makefile.inc b/src/northbridge/intel/i945/Makefile.inc new file mode 100644 index 0000000000..290ea0ceaa --- /dev/null +++ b/src/northbridge/intel/i945/Makefile.inc @@ -0,0 +1,24 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2007-2009 coresystems GmbH +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +driver-$(CONFIG_NORTHBRIDGE_INTEL_I945) += northbridge.o +driver-$(CONFIG_NORTHBRIDGE_INTEL_I945) += gma.o +ifeq ($(CONFIG_HAVE_ACPI_TABLES),y) + obj-$(CONFIG_NORTHBRIDGE_INTEL_I945) += acpi.o +endif diff --git a/src/northbridge/motorola/Kconfig b/src/northbridge/motorola/Kconfig new file mode 100644 index 0000000000..9e1258a0b6 --- /dev/null +++ b/src/northbridge/motorola/Kconfig @@ -0,0 +1 @@ +#source src/northbridge/motorola/mpc107/Kconfig diff --git a/src/northbridge/motorola/Makefile.inc b/src/northbridge/motorola/Makefile.inc new file mode 100644 index 0000000000..8ad991b01b --- /dev/null +++ b/src/northbridge/motorola/Makefile.inc @@ -0,0 +1 @@ +subdirs-y += mpc107 diff --git a/src/northbridge/via/Kconfig b/src/northbridge/via/Kconfig new file mode 100644 index 0000000000..0ed85e6737 --- /dev/null +++ b/src/northbridge/via/Kconfig @@ -0,0 +1,5 @@ +#source src/northbridge/via/cn700/Kconfig +source src/northbridge/via/cx700/Kconfig +#source src/northbridge/via/vt8601/Kconfig +#source src/northbridge/via/vt8623/Kconfig +#source src/northbridge/via/vx800/Kconfig diff --git a/src/northbridge/via/Makefile.inc b/src/northbridge/via/Makefile.inc new file mode 100644 index 0000000000..7062ea5b52 --- /dev/null +++ b/src/northbridge/via/Makefile.inc @@ -0,0 +1,6 @@ +#subdirs-y += vt8601 +#subdirs-y += vt8623 +#subdirs-y += cn700 +subdirs-y += cx700 +#subdirs-y += vx800 + diff --git a/src/northbridge/via/cx700/Kconfig b/src/northbridge/via/cx700/Kconfig new file mode 100644 index 0000000000..d103dd17ad --- /dev/null +++ b/src/northbridge/via/cx700/Kconfig @@ -0,0 +1,3 @@ +config NORTHBRIDGE_VIA_CX700 + bool + default n diff --git a/src/northbridge/via/cx700/Makefile.inc b/src/northbridge/via/cx700/Makefile.inc new file mode 100644 index 0000000000..1f9e50e993 --- /dev/null +++ b/src/northbridge/via/cx700/Makefile.inc @@ -0,0 +1,25 @@ +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2009 coresystems GmbH +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +obj-$(CONFIG_NORTHBRIDGE_VIA_CX700) += cx700_reset.o +obj-$(CONFIG_NORTHBRIDGE_VIA_CX700) += northbridge.o +obj-$(CONFIG_NORTHBRIDGE_VIA_CX700) += vgabios.o + +driver-$(CONFIG_NORTHBRIDGE_VIA_CX700) += cx700_agp.o +driver-$(CONFIG_NORTHBRIDGE_VIA_CX700) += cx700_lpc.o +driver-$(CONFIG_NORTHBRIDGE_VIA_CX700) += cx700_sata.o +driver-$(CONFIG_NORTHBRIDGE_VIA_CX700) += cx700_vga.o diff --git a/src/pc80/Makefile.inc b/src/pc80/Makefile.inc new file mode 100644 index 0000000000..a54c5ee41a --- /dev/null +++ b/src/pc80/Makefile.inc @@ -0,0 +1,9 @@ +obj-y += mc146818rtc.o +obj-y += isa-dma.o +obj-y += i8259.o +#obj-y += udelay_timer2.o CONFIG_UDELAY_TIMER2 +obj-$(CONFIG_UDELAY_IO) += udelay_io.o +obj-y += keyboard.o + +#initobj-y += serial.o + diff --git a/src/pc80/serial.c b/src/pc80/serial.c index 415736438b..6048d8b5bc 100644 --- a/src/pc80/serial.c +++ b/src/pc80/serial.c @@ -71,7 +71,7 @@ static void uart_tx_byte(unsigned char data) uart_wait_until_sent(); } -static void uart_init(void) +void uart_init(void) { /* disable interrupts */ outb(0x0, CONFIG_TTYS0_BASE + UART_IER); diff --git a/src/southbridge/Kconfig b/src/southbridge/Kconfig new file mode 100644 index 0000000000..51a4fb5e9c --- /dev/null +++ b/src/southbridge/Kconfig @@ -0,0 +1,8 @@ +#source src/southbridge/amd/Kconfig +#source src/southbridge/broadcom/Kconfig +source src/southbridge/intel/Kconfig +#source src/southbridge/nvidia/Kconfig +#source src/southbridge/ricoh/Kconfig +#source src/southbridge/sis/Kconfig +#source src/southbridge/via/Kconfig +#source src/southbridge/winbond/Kconfig diff --git a/src/southbridge/Makefile.inc b/src/southbridge/Makefile.inc new file mode 100644 index 0000000000..8f795a2f67 --- /dev/null +++ b/src/southbridge/Makefile.inc @@ -0,0 +1,8 @@ +#subdirs-y += amd +#subdirs-y += broadcom +subdirs-y += intel +#subdirs-y += nvidia +#subdirs-y += ricoh +#subdirs-y += sis +#subdirs-y += via +#subdirs-y += winbond diff --git a/src/southbridge/amd/Kconfig b/src/southbridge/amd/Kconfig new file mode 100644 index 0000000000..d451debfa5 --- /dev/null +++ b/src/southbridge/amd/Kconfig @@ -0,0 +1,10 @@ +source src/southbridge/amd/amd8111/Kconfig +source src/southbridge/amd/amd8131/Kconfig +source src/southbridge/amd/amd8131-disable/Kconfig +source src/southbridge/amd/amd8132/Kconfig +source src/southbridge/amd/amd8151/Kconfig +source src/southbridge/amd/cs5530/Kconfig +source src/southbridge/amd/cs5535/Kconfig +source src/southbridge/amd/cs5536/Kconfig +source src/southbridge/amd/rs690/Kconfig +source src/southbridge/amd/sb600/Kconfig diff --git a/src/southbridge/amd/Makefile.inc b/src/southbridge/amd/Makefile.inc new file mode 100644 index 0000000000..caf5e42690 --- /dev/null +++ b/src/southbridge/amd/Makefile.inc @@ -0,0 +1,11 @@ +subdirs-$(SOUTHBRIDGE_AMD_AMD8111) += amd8111 +subdirs-$(SOUTHBRIDGE_AMD_AMD8131) += amd8131 +subdirs-$(SOUTHBRIDGE_AMD_AMD8112) += amd8132 +subdirs-$(SOUTHBRIDGE_AMD_AMD8151) += amd8151 +subdirs-$(SOUTHBRIDGE_AMD_RS690) += rs690 +subdirs-$(SOUTHBRIDGE_AMD_SB600) += sb600 + +subdirs-$(SOUTHBRIDGE_AMD_CS5530) += cs5530 +subdirs-$(SOUTHBRIDGE_AMD_CS5535) += cs5535 +subdirs-$(SOUTHBRIDGE_AMD_CS5536) += cs5536 + diff --git a/src/southbridge/amd/amd8111/Kconfig b/src/southbridge/amd/amd8111/Kconfig new file mode 100644 index 0000000000..f0e3b1d6d8 --- /dev/null +++ b/src/southbridge/amd/amd8111/Kconfig @@ -0,0 +1,23 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2008-2009 coresystems GmbH +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +config SOUTHBRIDGE_AMD_AMD8111 + bool + default n + diff --git a/src/southbridge/broadcom/Kconfig b/src/southbridge/broadcom/Kconfig new file mode 100644 index 0000000000..38ff222a08 --- /dev/null +++ b/src/southbridge/broadcom/Kconfig @@ -0,0 +1,3 @@ +source src/southbridge/broadcom/bcm21000/Kconfig +source src/southbridge/broadcom/bcm5780/Kconfig +source src/southbridge/broadcom/bcm5785/Kconfig diff --git a/src/southbridge/broadcom/Makefile.inc b/src/southbridge/broadcom/Makefile.inc new file mode 100644 index 0000000000..e928b3625b --- /dev/null +++ b/src/southbridge/broadcom/Makefile.inc @@ -0,0 +1,4 @@ +subdirs-y += bcm21000 +subdirs-y += bcm5780 +subdirs-y += bcm5785 + diff --git a/src/southbridge/intel/Kconfig b/src/southbridge/intel/Kconfig new file mode 100644 index 0000000000..25adf845a3 --- /dev/null +++ b/src/southbridge/intel/Kconfig @@ -0,0 +1,10 @@ +#source src/southbridge/intel/esb6300/Kconfig +#source src/southbridge/intel/i3100/Kconfig +source src/southbridge/intel/i82371eb/Kconfig +#source src/southbridge/intel/i82801ca/Kconfig +#source src/southbridge/intel/i82801dbm/Kconfig +#source src/southbridge/intel/i82801er/Kconfig +source src/southbridge/intel/i82801gx/Kconfig +source src/southbridge/intel/i82801xx/Kconfig +#source src/southbridge/intel/i82870/Kconfig +#source src/southbridge/intel/pxhd/Kconfig diff --git a/src/southbridge/intel/Makefile.inc b/src/southbridge/intel/Makefile.inc new file mode 100644 index 0000000000..d69f0abb9c --- /dev/null +++ b/src/southbridge/intel/Makefile.inc @@ -0,0 +1,11 @@ +#subdirs-y += esb6300 +#subdirs-y += i3100 +subdirs-y += i82371eb +#subdirs-y += i82801ca +#subdirs-y += i82801dbm +#subdirs-y += i82801er +subdirs-y += i82801gx +subdirs-y += i82801xx +#subdirs-y += i82870 +#subdirs-y += pxhd + diff --git a/src/southbridge/intel/i82371eb/Kconfig b/src/southbridge/intel/i82371eb/Kconfig new file mode 100644 index 0000000000..e1c2044403 --- /dev/null +++ b/src/southbridge/intel/i82371eb/Kconfig @@ -0,0 +1,3 @@ +config SOUTHBRIDGE_INTEL_I82371EB + boolean + diff --git a/src/southbridge/intel/i82371eb/Makefile.inc b/src/southbridge/intel/i82371eb/Makefile.inc new file mode 100644 index 0000000000..1ddd4c96b3 --- /dev/null +++ b/src/southbridge/intel/i82371eb/Makefile.inc @@ -0,0 +1,27 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +driver-$(CONFIG_SOUTHBRIDGE_INTEL_I82371EB) += i82371eb.o +driver-$(CONFIG_SOUTHBRIDGE_INTEL_I82371EB) += i82371eb_isa.o +driver-$(CONFIG_SOUTHBRIDGE_INTEL_I82371EB) += i82371eb_ide.o +driver-$(CONFIG_SOUTHBRIDGE_INTEL_I82371EB) += i82371eb_usb.o +driver-$(CONFIG_SOUTHBRIDGE_INTEL_I82371EB) += i82371eb_smbus.o +driver-$(CONFIG_SOUTHBRIDGE_INTEL_I82371EB) += i82371eb_reset.o + +#initobj-$(CONFIG_SOUTHBRIDGE_INTEL_I82371EB) += i82371eb_early_rom.o diff --git a/src/southbridge/intel/i82801gx/Kconfig b/src/southbridge/intel/i82801gx/Kconfig new file mode 100644 index 0000000000..111c56183a --- /dev/null +++ b/src/southbridge/intel/i82801gx/Kconfig @@ -0,0 +1,23 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2008-2009 coresystems GmbH +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +config SOUTHBRIDGE_INTEL_I82801GX + bool + default n + diff --git a/src/southbridge/intel/i82801gx/Makefile.inc b/src/southbridge/intel/i82801gx/Makefile.inc new file mode 100644 index 0000000000..387ed100d7 --- /dev/null +++ b/src/southbridge/intel/i82801gx/Makefile.inc @@ -0,0 +1,40 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2008-2009 coresystems GmbH +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +driver-$(CONFIG_SOUTHBRIDGE_INTEL_I82801GX) += i82801gx.o +driver-$(CONFIG_SOUTHBRIDGE_INTEL_I82801GX) += i82801gx_ac97.o +driver-$(CONFIG_SOUTHBRIDGE_INTEL_I82801GX) += i82801gx_azalia.o +driver-$(CONFIG_SOUTHBRIDGE_INTEL_I82801GX) += i82801gx_ide.o +driver-$(CONFIG_SOUTHBRIDGE_INTEL_I82801GX) += i82801gx_lpc.o +driver-$(CONFIG_SOUTHBRIDGE_INTEL_I82801GX) += i82801gx_nic.o +driver-$(CONFIG_SOUTHBRIDGE_INTEL_I82801GX) += i82801gx_pci.o +driver-$(CONFIG_SOUTHBRIDGE_INTEL_I82801GX) += i82801gx_pcie.o +driver-$(CONFIG_SOUTHBRIDGE_INTEL_I82801GX) += i82801gx_sata.o +driver-$(CONFIG_SOUTHBRIDGE_INTEL_I82801GX) += i82801gx_smbus.o +driver-$(CONFIG_SOUTHBRIDGE_INTEL_I82801GX) += i82801gx_usb.o +driver-$(CONFIG_SOUTHBRIDGE_INTEL_I82801GX) += i82801gx_usb_ehci.o + +object-$(CONFIG_SOUTHBRIDGE_INTEL_I82801GX) += i82801gx_reset.o +object-$(CONFIG_SOUTHBRIDGE_INTEL_I82801GX) += i82801gx_watchdog.o + +# arg. How does the linux kconfig handle compound conditionals? +ifeq ($(CONFIG_HAVE_SMI_HANDLER),y) + object-$(CONFIG_SOUTHBRIDGE_INTEL_I82801GX) += i82801gx_smi.o + smmobj-$(CONFIG_SOUTHBRIDGE_INTEL_I82801GX) += i82801gx_smihandler.o +endif diff --git a/src/southbridge/intel/i82801xx/Kconfig b/src/southbridge/intel/i82801xx/Kconfig new file mode 100644 index 0000000000..ce4ab30e11 --- /dev/null +++ b/src/southbridge/intel/i82801xx/Kconfig @@ -0,0 +1,24 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +config SOUTHBRIDGE_INTEL_I82801XX + bool + default n + diff --git a/src/southbridge/intel/i82801xx/Makefile.inc b/src/southbridge/intel/i82801xx/Makefile.inc new file mode 100644 index 0000000000..337b4e88f7 --- /dev/null +++ b/src/southbridge/intel/i82801xx/Makefile.inc @@ -0,0 +1,36 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +driver-$(CONFIG_SOUTHBRIDGE_INTEL_I82801XX) += i82801xx.o +driver-$(CONFIG_SOUTHBRIDGE_INTEL_I82801XX) += i82801xx_ac97.o +driver-$(CONFIG_SOUTHBRIDGE_INTEL_I82801XX) += i82801xx_ide.o +driver-$(CONFIG_SOUTHBRIDGE_INTEL_I82801XX) += i82801xx_lpc.o +driver-$(CONFIG_SOUTHBRIDGE_INTEL_I82801XX) += i82801xx_nic.o +driver-$(CONFIG_SOUTHBRIDGE_INTEL_I82801XX) += i82801xx_pci.o +driver-$(CONFIG_SOUTHBRIDGE_INTEL_I82801XX) += i82801xx_sata.o +driver-$(CONFIG_SOUTHBRIDGE_INTEL_I82801XX) += i82801xx_smbus.o +driver-$(CONFIG_SOUTHBRIDGE_INTEL_I82801XX) += i82801xx_usb.o +driver-$(CONFIG_SOUTHBRIDGE_INTEL_I82801XX) += i82801xx_usb_ehci.o + +object-$(CONFIG_SOUTHBRIDGE_INTEL_I82801XX) += i82801xx_reset.o +object-$(CONFIG_SOUTHBRIDGE_INTEL_I82801XX) += i82801xx_watchdog.o + +# TODO: What about cmos_failover.c? + diff --git a/src/southbridge/nvidia/Kconfig b/src/southbridge/nvidia/Kconfig new file mode 100644 index 0000000000..59fc8ed6a6 --- /dev/null +++ b/src/southbridge/nvidia/Kconfig @@ -0,0 +1,2 @@ +source src/southbridge/nvidia/ck804/Kconfig +source src/southbridge/nvidia/mcp55/Kconfig diff --git a/src/southbridge/nvidia/Makefile.inc b/src/southbridge/nvidia/Makefile.inc new file mode 100644 index 0000000000..cb3bc70ac5 --- /dev/null +++ b/src/southbridge/nvidia/Makefile.inc @@ -0,0 +1,3 @@ +subdirs-y += ck804 +subdirs-y += mcp55 + diff --git a/src/southbridge/ricoh/Kconfig b/src/southbridge/ricoh/Kconfig new file mode 100644 index 0000000000..2d25e9e2d6 --- /dev/null +++ b/src/southbridge/ricoh/Kconfig @@ -0,0 +1 @@ +source src/southbridge/ricoh/rl5c476/Kconfig diff --git a/src/southbridge/ricoh/Makefile.inc b/src/southbridge/ricoh/Makefile.inc new file mode 100644 index 0000000000..81051c989b --- /dev/null +++ b/src/southbridge/ricoh/Makefile.inc @@ -0,0 +1 @@ +subdirs-y += rl5c476 diff --git a/src/southbridge/sis/Kconfig b/src/southbridge/sis/Kconfig new file mode 100644 index 0000000000..4d113841e2 --- /dev/null +++ b/src/southbridge/sis/Kconfig @@ -0,0 +1 @@ +source src/southbridge/sis/sis966/Kconfig diff --git a/src/southbridge/sis/Makefile.inc b/src/southbridge/sis/Makefile.inc new file mode 100644 index 0000000000..741df1c7d0 --- /dev/null +++ b/src/southbridge/sis/Makefile.inc @@ -0,0 +1,2 @@ +subdirs-y += sis966 + diff --git a/src/southbridge/via/Kconfig b/src/southbridge/via/Kconfig new file mode 100644 index 0000000000..fb19cbc003 --- /dev/null +++ b/src/southbridge/via/Kconfig @@ -0,0 +1,5 @@ +source src/southbridge/via/k8t890/Kconfig +source src/southbridge/via/vt8231/Kconfig +source src/southbridge/via/vt8235/Kconfig +source src/southbridge/via/vt8237r/Kconfig +source src/southbridge/via/vt82c686/Kconfig diff --git a/src/southbridge/via/Makefile.inc b/src/southbridge/via/Makefile.inc new file mode 100644 index 0000000000..12357e9f4e --- /dev/null +++ b/src/southbridge/via/Makefile.inc @@ -0,0 +1,5 @@ +subdirs-y += k8t890 +subdirs-y += vt8231 +subdirs-y += vt8235 +subdirs-y += vt8237r +subdirs-y += vt82c686 diff --git a/src/southbridge/winbond/Kconfig b/src/southbridge/winbond/Kconfig new file mode 100644 index 0000000000..9ca0c3ee40 --- /dev/null +++ b/src/southbridge/winbond/Kconfig @@ -0,0 +1 @@ +source src/southbridge/winbond/w83c553/Kconfig diff --git a/src/southbridge/winbond/Makefile.inc b/src/southbridge/winbond/Makefile.inc new file mode 100644 index 0000000000..004313a7fa --- /dev/null +++ b/src/southbridge/winbond/Makefile.inc @@ -0,0 +1 @@ +subdirs-y += w83c553 diff --git a/src/superio/Kconfig b/src/superio/Kconfig new file mode 100644 index 0000000000..65ebf4a53e --- /dev/null +++ b/src/superio/Kconfig @@ -0,0 +1,8 @@ +source src/superio/fintek/Kconfig +source src/superio/intel/Kconfig +source src/superio/ite/Kconfig +source src/superio/nsc/Kconfig +source src/superio/serverengines/Kconfig +source src/superio/smsc/Kconfig +source src/superio/via/Kconfig +source src/superio/winbond/Kconfig diff --git a/src/superio/Makefile.inc b/src/superio/Makefile.inc new file mode 100644 index 0000000000..c6f088837a --- /dev/null +++ b/src/superio/Makefile.inc @@ -0,0 +1,10 @@ + +subdirs-y += fintek +subdirs-y += intel +subdirs-y += ite +subdirs-y += nsc +#subdirs-y += serverengine +subdirs-y += smsc +subdirs-y += via +subdirs-y += winbond + diff --git a/src/superio/fintek/Kconfig b/src/superio/fintek/Kconfig new file mode 100644 index 0000000000..540e18e44e --- /dev/null +++ b/src/superio/fintek/Kconfig @@ -0,0 +1,2 @@ +config SUPERIO_FINTEK_F71805F + bool diff --git a/src/superio/fintek/Makefile.inc b/src/superio/fintek/Makefile.inc new file mode 100644 index 0000000000..0d1ca793d2 --- /dev/null +++ b/src/superio/fintek/Makefile.inc @@ -0,0 +1 @@ +subdirs-y += f71805f diff --git a/src/superio/fintek/f71805f/Makefile.inc b/src/superio/fintek/f71805f/Makefile.inc new file mode 100644 index 0000000000..8dc10a63d4 --- /dev/null +++ b/src/superio/fintek/f71805f/Makefile.inc @@ -0,0 +1,23 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2008 Corey Osgood <corey.osgood@gmail.com> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +#config chip.h +obj-$(CONFIG_SUPERIO_FINTEK_F71805F) += superio.o + diff --git a/src/superio/intel/Kconfig b/src/superio/intel/Kconfig new file mode 100644 index 0000000000..39652b0fbb --- /dev/null +++ b/src/superio/intel/Kconfig @@ -0,0 +1,2 @@ +config SUPERIO_FINTEK_I3100 + bool diff --git a/src/superio/intel/Makefile.inc b/src/superio/intel/Makefile.inc new file mode 100644 index 0000000000..5416eea48f --- /dev/null +++ b/src/superio/intel/Makefile.inc @@ -0,0 +1 @@ +subdirs-y += i3100 diff --git a/src/superio/intel/i3100/Makefile.inc b/src/superio/intel/i3100/Makefile.inc new file mode 100644 index 0000000000..9cf0033acd --- /dev/null +++ b/src/superio/intel/i3100/Makefile.inc @@ -0,0 +1,23 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2008 Arastra, Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +#config chip.h +obj-$(CONFIG_SUPERIO_INTEL_I3100) += superio.o + diff --git a/src/superio/ite/Kconfig b/src/superio/ite/Kconfig new file mode 100644 index 0000000000..066498149b --- /dev/null +++ b/src/superio/ite/Kconfig @@ -0,0 +1,14 @@ +config SUPERIO_ITE_IT8661F + bool +config SUPERIO_ITE_IT8671F + bool +config SUPERIO_ITE_IT8673F + bool +config SUPERIO_ITE_IT8705F + bool +config SUPERIO_ITE_IT8712F + bool +config SUPERIO_ITE_IT8716F + bool +config SUPERIO_ITE_IT8718F + bool diff --git a/src/superio/ite/Makefile.inc b/src/superio/ite/Makefile.inc new file mode 100644 index 0000000000..9e92ce0d14 --- /dev/null +++ b/src/superio/ite/Makefile.inc @@ -0,0 +1,7 @@ +subdirs-y += it8661f +subdirs-y += it8671f +subdirs-y += it8673f +subdirs-y += it8705f +subdirs-y += it8712f +subdirs-y += it8716f +subdirs-y += it8718f diff --git a/src/superio/ite/it8661f/Makefile.inc b/src/superio/ite/it8661f/Makefile.inc new file mode 100644 index 0000000000..d37f3ea637 --- /dev/null +++ b/src/superio/ite/it8661f/Makefile.inc @@ -0,0 +1,23 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +#config chip.h +obj-$(CONFIG_SUPERIO_ITE_IT8661F) += superio.o + diff --git a/src/superio/ite/it8671f/Makefile.inc b/src/superio/ite/it8671f/Makefile.inc new file mode 100644 index 0000000000..6f047caed3 --- /dev/null +++ b/src/superio/ite/it8671f/Makefile.inc @@ -0,0 +1,23 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +#config chip.h +obj-$(CONFIG_SUPERIO_ITE_IT8671F) += superio.o + diff --git a/src/superio/ite/it8673f/Makefile.inc b/src/superio/ite/it8673f/Makefile.inc new file mode 100644 index 0000000000..4d89bcec97 --- /dev/null +++ b/src/superio/ite/it8673f/Makefile.inc @@ -0,0 +1,23 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +#config chip.h +obj-$(CONFIG_SUPERIO_ITE_IT8673F) += superio.o + diff --git a/src/superio/ite/it8705f/Makefile.inc b/src/superio/ite/it8705f/Makefile.inc new file mode 100644 index 0000000000..db495c9f1a --- /dev/null +++ b/src/superio/ite/it8705f/Makefile.inc @@ -0,0 +1,23 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +#config chip.h +obj-$(CONFIG_SUPERIO_ITE_IT8705F) += superio.o + diff --git a/src/superio/ite/it8712f/Makefile.inc b/src/superio/ite/it8712f/Makefile.inc new file mode 100644 index 0000000000..7f293b485d --- /dev/null +++ b/src/superio/ite/it8712f/Makefile.inc @@ -0,0 +1,23 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +#config chip.h +obj-$(CONFIG_SUPERIO_ITE_IT8712F) += superio.o + diff --git a/src/superio/ite/it8716f/Makefile.inc b/src/superio/ite/it8716f/Makefile.inc new file mode 100644 index 0000000000..bf0a70c79a --- /dev/null +++ b/src/superio/ite/it8716f/Makefile.inc @@ -0,0 +1,23 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +#config chip.h +obj-$(CONFIG_SUPERIO_ITE_IT8716F) += superio.o + diff --git a/src/superio/ite/it8718f/Makefile.inc b/src/superio/ite/it8718f/Makefile.inc new file mode 100644 index 0000000000..00ef7443b6 --- /dev/null +++ b/src/superio/ite/it8718f/Makefile.inc @@ -0,0 +1,23 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +#config chip.h +obj-$(CONFIG_SUPERIO_ITE_IT8718F) += superio.o + diff --git a/src/superio/nsc/Kconfig b/src/superio/nsc/Kconfig new file mode 100644 index 0000000000..68a1df8086 --- /dev/null +++ b/src/superio/nsc/Kconfig @@ -0,0 +1,18 @@ +config SUPERIO_NSC_PC8374 + bool +config SUPERIO_NSC_PC87309 + bool +config SUPERIO_NSC_PC87351 + bool +config SUPERIO_NSC_PC87360 + bool +config SUPERIO_NSC_PC87366 + bool +config SUPERIO_NSC_PC87417 + bool +config SUPERIO_NSC_PC87427 + bool +config SUPERIO_NSC_PC97307 + bool +config SUPERIO_NSC_PC97317 + bool diff --git a/src/superio/nsc/Makefile.inc b/src/superio/nsc/Makefile.inc new file mode 100644 index 0000000000..8cd04426cd --- /dev/null +++ b/src/superio/nsc/Makefile.inc @@ -0,0 +1,9 @@ +subdirs-y += pc8374 +subdirs-y += pc87309 +subdirs-y += pc87351 +subdirs-y += pc87360 +subdirs-y += pc87366 +subdirs-y += pc87417 +subdirs-y += pc87427 +subdirs-y += pc97307 +subdirs-y += pc97317 diff --git a/src/superio/nsc/pc8374/Makefile.inc b/src/superio/nsc/pc8374/Makefile.inc new file mode 100644 index 0000000000..d001b57c42 --- /dev/null +++ b/src/superio/nsc/pc8374/Makefile.inc @@ -0,0 +1,2 @@ +#config chip.h +obj-$(CONFIG_SUPERIO_NSC_PC8374) += superio.o diff --git a/src/superio/nsc/pc87309/Makefile.inc b/src/superio/nsc/pc87309/Makefile.inc new file mode 100644 index 0000000000..9fde44e0c6 --- /dev/null +++ b/src/superio/nsc/pc87309/Makefile.inc @@ -0,0 +1,23 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +#config chip.h +obj-$(CONFIG_SUPERIO_NSC_PC87309) += superio.o + diff --git a/src/superio/nsc/pc87351/Makefile.inc b/src/superio/nsc/pc87351/Makefile.inc new file mode 100644 index 0000000000..93206adbaa --- /dev/null +++ b/src/superio/nsc/pc87351/Makefile.inc @@ -0,0 +1,2 @@ +#config chip.h +obj-$(CONFIG_SUPERIO_NSC_PC87351) += superio.o diff --git a/src/superio/nsc/pc87360/Makefile.inc b/src/superio/nsc/pc87360/Makefile.inc new file mode 100644 index 0000000000..0cb7abc104 --- /dev/null +++ b/src/superio/nsc/pc87360/Makefile.inc @@ -0,0 +1,2 @@ +#config chip.h +obj-$(CONFIG_SUPERIO_NSC_PC87360) += superio.o diff --git a/src/superio/nsc/pc87366/Makefile.inc b/src/superio/nsc/pc87366/Makefile.inc new file mode 100644 index 0000000000..7251d8cf8b --- /dev/null +++ b/src/superio/nsc/pc87366/Makefile.inc @@ -0,0 +1,2 @@ +#config chip.h +obj-$(CONFIG_SUPERIO_NSC_PC87366) += superio.o diff --git a/src/superio/nsc/pc87417/Makefile.inc b/src/superio/nsc/pc87417/Makefile.inc new file mode 100644 index 0000000000..65727440a1 --- /dev/null +++ b/src/superio/nsc/pc87417/Makefile.inc @@ -0,0 +1,2 @@ +#config chip.h +obj-$(CONFIG_SUPERIO_NSC_PC87417) += superio.o diff --git a/src/superio/nsc/pc87427/Makefile.inc b/src/superio/nsc/pc87427/Makefile.inc new file mode 100644 index 0000000000..a5e47bac23 --- /dev/null +++ b/src/superio/nsc/pc87427/Makefile.inc @@ -0,0 +1,2 @@ +#config chip.h +obj-$(CONFIG_SUPERIO_NSC_PC87427) += superio.o diff --git a/src/superio/nsc/pc97307/Makefile.inc b/src/superio/nsc/pc97307/Makefile.inc new file mode 100644 index 0000000000..548504c645 --- /dev/null +++ b/src/superio/nsc/pc97307/Makefile.inc @@ -0,0 +1,2 @@ +#config chip.h +obj-$(CONFIG_SUPERIO_NSC_PC97307) += superio.o diff --git a/src/superio/nsc/pc97317/Makefile.inc b/src/superio/nsc/pc97317/Makefile.inc new file mode 100644 index 0000000000..feda33b856 --- /dev/null +++ b/src/superio/nsc/pc97317/Makefile.inc @@ -0,0 +1,2 @@ +#config chip.h +obj-$(CONFIG_SUPERIO_NSC_PC97317) += superio.o diff --git a/src/superio/serverengines/Kconfig b/src/superio/serverengines/Kconfig new file mode 100644 index 0000000000..5fb2304067 --- /dev/null +++ b/src/superio/serverengines/Kconfig @@ -0,0 +1,2 @@ +config SERVERENGINES_ITE_PILOT + bool diff --git a/src/superio/smsc/Kconfig b/src/superio/smsc/Kconfig new file mode 100644 index 0000000000..5cbd0d1c47 --- /dev/null +++ b/src/superio/smsc/Kconfig @@ -0,0 +1,12 @@ +config SUPERIO_SMCSC_FDC37M60X + bool +config SUPERIO_SMCSC_LPC47B272 + bool +config SUPERIO_SMCSC_LPC47B397 + bool +config SUPERIO_SMCSC_LPC47M10X + bool +config SUPERIO_SMCSC_LPC47N217 + bool +config SUPERIO_SMCSC_SMSCSUPERIO + bool diff --git a/src/superio/smsc/Makefile.inc b/src/superio/smsc/Makefile.inc new file mode 100644 index 0000000000..db59651c1d --- /dev/null +++ b/src/superio/smsc/Makefile.inc @@ -0,0 +1,6 @@ +subdirs-y += fdc37m60x +subdirs-y += lpc47b272 +subdirs-y += lpc47b397 +subdirs-y += lpc47m10x +subdirs-y += lpc47n217 +subdirs-y += smscsuperio diff --git a/src/superio/smsc/fdc37m60x/Makefile.inc b/src/superio/smsc/fdc37m60x/Makefile.inc new file mode 100644 index 0000000000..a2bf48097f --- /dev/null +++ b/src/superio/smsc/fdc37m60x/Makefile.inc @@ -0,0 +1,23 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +#config chip.h +obj-$(CONFIG_SUPERIO_SMSC_FDC37M60X) += superio.o + diff --git a/src/superio/smsc/lpc47b272/Makefile.inc b/src/superio/smsc/lpc47b272/Makefile.inc new file mode 100644 index 0000000000..031d5df8ca --- /dev/null +++ b/src/superio/smsc/lpc47b272/Makefile.inc @@ -0,0 +1,23 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2005 Digital Design Corporation +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +#config chip.h +obj-$(CONFIG_SUPERIO_SMSC_DEVICE) += superio.o + diff --git a/src/superio/smsc/lpc47b397/Makefile.inc b/src/superio/smsc/lpc47b397/Makefile.inc new file mode 100644 index 0000000000..ff7f93f412 --- /dev/null +++ b/src/superio/smsc/lpc47b397/Makefile.inc @@ -0,0 +1,2 @@ +#config chip.h +obj-$(CONFIG_SUPERIO_SMSC_LPC47B397) += superio.o diff --git a/src/superio/smsc/lpc47m10x/Makefile.inc b/src/superio/smsc/lpc47m10x/Makefile.inc new file mode 100644 index 0000000000..47cbf6b805 --- /dev/null +++ b/src/superio/smsc/lpc47m10x/Makefile.inc @@ -0,0 +1,2 @@ +#config chip.h +obj-$(CONFIG_SUPERIO_SMSC_LPC47M10X) += superio.o diff --git a/src/superio/smsc/lpc47n217/Makefile.inc b/src/superio/smsc/lpc47n217/Makefile.inc new file mode 100644 index 0000000000..edde7624dc --- /dev/null +++ b/src/superio/smsc/lpc47n217/Makefile.inc @@ -0,0 +1,22 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2005 Digital Design Corporation +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +#config chip.h +obj-$(CONFIG_SUPERIO_SMSC_LPC47N217) += superio.o diff --git a/src/superio/smsc/smscsuperio/Makefile.inc b/src/superio/smsc/smscsuperio/Makefile.inc new file mode 100644 index 0000000000..f5d42787a0 --- /dev/null +++ b/src/superio/smsc/smscsuperio/Makefile.inc @@ -0,0 +1,23 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +#config chip.h +obj-$(CONFIG_SUPERIO_SMSC_SMSCSUPERIO) += superio.o + diff --git a/src/superio/via/Kconfig b/src/superio/via/Kconfig new file mode 100644 index 0000000000..36b7f472cb --- /dev/null +++ b/src/superio/via/Kconfig @@ -0,0 +1,2 @@ +config SUPERIO_VIA_VT1211 + bool diff --git a/src/superio/via/Makefile.inc b/src/superio/via/Makefile.inc new file mode 100644 index 0000000000..350101aa01 --- /dev/null +++ b/src/superio/via/Makefile.inc @@ -0,0 +1 @@ +subdirs-y += vt1211 diff --git a/src/superio/via/vt1211/Makefile.inc b/src/superio/via/vt1211/Makefile.inc new file mode 100644 index 0000000000..827c9f9d3a --- /dev/null +++ b/src/superio/via/vt1211/Makefile.inc @@ -0,0 +1,2 @@ +#config chip.h +obj-$(CONFIG_SUPERIO_VIA_VT1211) += vt1211.o diff --git a/src/superio/winbond/Kconfig b/src/superio/winbond/Kconfig new file mode 100644 index 0000000000..24825a7f9b --- /dev/null +++ b/src/superio/winbond/Kconfig @@ -0,0 +1,18 @@ +config SUPERIO_WINBOND_W83627DHG + boolean +config SUPERIO_WINBOND_W83627EHG + boolean +config SUPERIO_WINBOND_W83627HF + boolean +config SUPERIO_WINBOND_W83627THF + boolean +config SUPERIO_WINBOND_W83627THG + boolean +config SUPERIO_WINBOND_W83627UHG + boolean +config SUPERIO_WINBOND_W83697HF + boolean +config SUPERIO_WINBOND_W83977F + boolean +config SUPERIO_WINBOND_W83977TF + boolean diff --git a/src/superio/winbond/Makefile.inc b/src/superio/winbond/Makefile.inc new file mode 100644 index 0000000000..e8dbad998b --- /dev/null +++ b/src/superio/winbond/Makefile.inc @@ -0,0 +1,9 @@ +subdirs-y += w83627dhg +subdirs-y += w83627ehg +subdirs-y += w83627hf +subdirs-y += w83627thf +subdirs-y += w83627thg +subdirs-y += w83627uhg +subdirs-y += w83697hf +subdirs-y += w83977f +subdirs-y += w83977tf diff --git a/src/superio/winbond/w83627dhg/Makefile.inc b/src/superio/winbond/w83627dhg/Makefile.inc new file mode 100644 index 0000000000..168d803ac1 --- /dev/null +++ b/src/superio/winbond/w83627dhg/Makefile.inc @@ -0,0 +1,23 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +#config chip.h +obj-$(CONFIG_SUPERIO_WINBOND_W83627DHG) += superio.o + diff --git a/src/superio/winbond/w83627ehg/Makefile.inc b/src/superio/winbond/w83627ehg/Makefile.inc new file mode 100644 index 0000000000..d52c5ebc94 --- /dev/null +++ b/src/superio/winbond/w83627ehg/Makefile.inc @@ -0,0 +1,24 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 AMD +## Written by Yinghai Lu <yinghai.lu@amd.com> for AMD. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +#config chip.h +obj-$(CONFIG_SUPERIO_WINBOND_W83627EHG) += superio.o + diff --git a/src/superio/winbond/w83627hf/Makefile.inc b/src/superio/winbond/w83627hf/Makefile.inc new file mode 100644 index 0000000000..7f393c1660 --- /dev/null +++ b/src/superio/winbond/w83627hf/Makefile.inc @@ -0,0 +1,2 @@ +#config chip.h +obj-$(CONFIG_SUPERIO_WINBOND_W83627HF) += superio.o diff --git a/src/superio/winbond/w83627thf/Makefile.inc b/src/superio/winbond/w83627thf/Makefile.inc new file mode 100644 index 0000000000..2c74921e14 --- /dev/null +++ b/src/superio/winbond/w83627thf/Makefile.inc @@ -0,0 +1,2 @@ +#config chip.h +obj-$(CONFIG_SUPERIO_WINBOND_W83627THF) += superio.o diff --git a/src/superio/winbond/w83627thg/Makefile.inc b/src/superio/winbond/w83627thg/Makefile.inc new file mode 100644 index 0000000000..ea60c2fa20 --- /dev/null +++ b/src/superio/winbond/w83627thg/Makefile.inc @@ -0,0 +1,2 @@ +#config chip.h +obj-$(CONFIG_SUPERIO_WINBOND_W83627THG) += superio.o diff --git a/src/superio/winbond/w83627uhg/Makefile.inc b/src/superio/winbond/w83627uhg/Makefile.inc new file mode 100644 index 0000000000..58dd621234 --- /dev/null +++ b/src/superio/winbond/w83627uhg/Makefile.inc @@ -0,0 +1,22 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Dynon Avionics +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 $ +## + +#config chip.h +obj-$(CONFIG_SUPERIO_WINBOND_W83627UHG) += superio.o diff --git a/src/superio/winbond/w83697hf/Makefile.inc b/src/superio/winbond/w83697hf/Makefile.inc new file mode 100644 index 0000000000..72fb90dd9a --- /dev/null +++ b/src/superio/winbond/w83697hf/Makefile.inc @@ -0,0 +1,22 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2008 Sean Nelson <snelson@nmt.edu> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +#config chip.h +obj-$(CONFIG_SUPERIO_WINBOND_W83697HF) += superio.o diff --git a/src/superio/winbond/w83977f/Makefile.inc b/src/superio/winbond/w83977f/Makefile.inc new file mode 100644 index 0000000000..7f394cbb3d --- /dev/null +++ b/src/superio/winbond/w83977f/Makefile.inc @@ -0,0 +1,22 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 Nikolay Petukhov <nikolay.petukhov@gmail.com> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +#config chip.h +obj-$(CONFIG_SUPERIO_WINBOND_W83977F) += superio.o diff --git a/src/superio/winbond/w83977tf/Makefile.inc b/src/superio/winbond/w83977tf/Makefile.inc new file mode 100644 index 0000000000..07fc338b1c --- /dev/null +++ b/src/superio/winbond/w83977tf/Makefile.inc @@ -0,0 +1,2 @@ +#config chip.h +obj-$(CONFIG_SUPERIO_WINBOND_W83977TF) += superio.o |