diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/northbridge/intel/sandybridge/raminit_native.c | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/src/northbridge/intel/sandybridge/raminit_native.c b/src/northbridge/intel/sandybridge/raminit_native.c index 9961e89069..4c1fb8fe17 100644 --- a/src/northbridge/intel/sandybridge/raminit_native.c +++ b/src/northbridge/intel/sandybridge/raminit_native.c @@ -555,7 +555,7 @@ static void dram_freq(ramctr_timing *ctrl) if (ctrl->tCK > TCK_400MHZ) { printk(BIOS_ERR, "DRAM frequency is under lowest supported frequency (400 MHz). " - "Increasing to 400 MHz as last resort"); + "Increasing to 400 MHz as last resort.\n"); ctrl->tCK = TCK_400MHZ; } @@ -563,11 +563,11 @@ static void dram_freq(ramctr_timing *ctrl) u8 val2; u32 reg1 = 0; - /* Step 1 - Set target PCU frequency */ + /* Step 1 - Determine target MPLL frequency */ find_cas_tck(ctrl); /* - * The PLL will never lock if the required frequency is already set. + * The MPLL will never lock if the requested frequency is already set. * Exit early to prevent a system hang. */ reg1 = MCHBAR32(MC_BIOS_DATA); @@ -575,15 +575,15 @@ static void dram_freq(ramctr_timing *ctrl) if (val2) return; - /* Step 2 - Select frequency in the MCU */ + /* Step 2 - Request MPLL frequency through the PCU */ reg1 = ctrl->FRQ; if (ctrl->base_freq == 100) - reg1 |= (1 << 8); /* Enable 100Mhz REF clock */ + reg1 |= (1 << 8); /* Use 100MHz reference clock */ - reg1 |= (1 << 31); /* set running bit */ + reg1 |= (1 << 31); /* Set running bit */ MCHBAR32(MC_BIOS_REQ) = reg1; int i = 0; - printk(BIOS_DEBUG, "PLL busy... "); + printk(BIOS_DEBUG, "MPLL busy... "); while (reg1 & (1 << 31)) { udelay(10); i++; @@ -595,11 +595,11 @@ static void dram_freq(ramctr_timing *ctrl) reg1 = MCHBAR32(MC_BIOS_DATA); val2 = (u8) reg1; if (val2 >= ctrl->FRQ) { - printk(BIOS_DEBUG, "MCU frequency is set at : %d MHz\n", + printk(BIOS_DEBUG, "MPLL frequency is set at : %d MHz\n", (1000 << 8) / ctrl->tCK); return; } - printk(BIOS_DEBUG, "PLL didn't lock. Retrying at lower frequency\n"); + printk(BIOS_DEBUG, "MPLL didn't lock. Retrying at lower frequency\n"); ctrl->tCK++; } } @@ -661,7 +661,7 @@ int try_init_dram_ddr3(ramctr_timing *ctrl, int fast_boot, int s3resume, int me_ dram_dimm_mapping(ctrl); } - /* Set MC frequency */ + /* Set MPLL frequency */ dram_freq(ctrl); if (!fast_boot) { |