3 files changed, 1 insertions, 75 deletions
diff --git a/src/soc/intel/skylake/Kconfig b/src/soc/intel/skylake/Kconfig
index e7cca3255a..80cdde63f8 100644
--- a/src/soc/intel/skylake/Kconfig
+++ b/src/soc/intel/skylake/Kconfig
@@ -60,6 +60,7 @@ config CPU_SPECIFIC_OPTIONS
 	select SOC_INTEL_COMMON_BLOCK_PCR
 	select SOC_INTEL_COMMON_BLOCK_RTC
 	select SOC_INTEL_COMMON_BLOCK_SA
+	select SOC_INTEL_COMMON_BLOCK_SATA
 	select SOC_INTEL_COMMON_BLOCK_SMBUS
 	select SOC_INTEL_COMMON_BLOCK_UART
 	select SOC_INTEL_COMMON_BLOCK_XHCI
diff --git a/src/soc/intel/skylake/Makefile.inc b/src/soc/intel/skylake/Makefile.inc
index 21f2f74811..3ce88a73af 100644
--- a/src/soc/intel/skylake/Makefile.inc
+++ b/src/soc/intel/skylake/Makefile.inc
@@ -70,7 +70,6 @@ ramstage-y += pei_data.c
 ramstage-y += pmc.c
 ramstage-y += pmutil.c
 ramstage-$(CONFIG_PLATFORM_USES_FSP2_0) += reset.c
-ramstage-y += sata.c
 ramstage-y += sd.c
 ramstage-y += sgx.c
 ramstage-y += smi.c
diff --git a/src/soc/intel/skylake/sata.c b/src/soc/intel/skylake/sata.c
deleted file mode 100644
index 277d6da246..0000000000
--- a/src/soc/intel/skylake/sata.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2016 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <soc/ramstage.h>
-
-static void *get_ahci_bar(void)
-{
-	device_t dev = PCH_DEV_SATA;
-	uint32_t bar;
-
-	bar = pci_read_config32(dev, PCI_BASE_ADDRESS_5);
-
-	return (void *)(bar & ~PCI_BASE_ADDRESS_MEM_ATTR_MASK);
-}
-
-/*
- * SATA Port control and Status. By default, the SATA ports are set (by HW)
- * to the disabled state (e.g. bits[3:0] == '0') as a result of an initial
- * power on reset. When enabled by software as per SATA port mapping,
- * the ports can transition between the on, partial and slumber states
- * and can detect devices. When disabled, the port is in the off state and
- * can't detect any devices.
- */
-static void sata_final(device_t dev)
-{
-	void *ahcibar = get_ahci_bar();
-	u32 port_impl, temp;
-
-	dev = PCH_DEV_SATA;
-	/* Read Ports Implemented (GHC_PI) */
-	port_impl = read32(ahcibar + 0x0c) & 0x07;
-	/* Port enable */
-	temp = pci_read_config32(dev, 0x92);
-	temp |= port_impl;
-	pci_write_config32(dev, 0x92, temp);
-
-}
-
-static struct device_operations sata_ops = {
-	.read_resources		  = &pci_dev_read_resources,
-	.set_resources		  = &pci_dev_set_resources,
-	.enable_resources	  = &pci_dev_enable_resources,
-	.final			  = sata_final,
-	.ops_pci		  = &soc_pci_ops,
-};
-
-static const unsigned short pci_device_ids[] = {
-	0x9d03, /* SKL-U Base */
-	0x9d07, /* SKL-Y Premium, SKL-U Premium */
-	0x282a, /* KBL */
-	0
-};
-
-static const struct pci_driver pch_sata __pci_driver = {
-	.ops	 = &sata_ops,
-	.vendor	 = PCI_VENDOR_ID_INTEL,
-	.devices	 = pci_device_ids,
-};