diff options
Diffstat (limited to 'src')
337 files changed, 702 insertions, 702 deletions
diff --git a/src/arch/x86/boot/acpi.c b/src/arch/x86/boot/acpi.c index 010ba9f6ff..69322088e2 100644 --- a/src/arch/x86/boot/acpi.c +++ b/src/arch/x86/boot/acpi.c @@ -550,7 +550,7 @@ void acpi_write_hest(acpi_hest_t *hest) header->checksum = acpi_checksum((void *)hest, header->length); } -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME void suspend_resume(void) { void *wake_vec; diff --git a/src/arch/x86/boot/coreboot_table.c b/src/arch/x86/boot/coreboot_table.c index 9ceca45f76..5b5834a868 100644 --- a/src/arch/x86/boot/coreboot_table.c +++ b/src/arch/x86/boot/coreboot_table.c @@ -324,7 +324,7 @@ static void lb_strings(struct lb_header *header) } -#if CONFIG_WRITE_HIGH_TABLES == 1 +#if CONFIG_WRITE_HIGH_TABLES static struct lb_forward *lb_forward(struct lb_header *header, struct lb_header *next_header) { struct lb_record *rec; diff --git a/src/arch/x86/boot/tables.c b/src/arch/x86/boot/tables.c index 4fefc7d0d3..72aa979b7c 100644 --- a/src/arch/x86/boot/tables.c +++ b/src/arch/x86/boot/tables.c @@ -71,7 +71,7 @@ struct lb_memory *write_tables(void) low_table_start = 0; low_table_end = 0x500; -#if CONFIG_GENERATE_PIRQ_TABLE == 1 +#if CONFIG_GENERATE_PIRQ_TABLE #define MAX_PIRQ_TABLE_SIZE (4 * 1024) post_code(0x9a); @@ -97,7 +97,7 @@ struct lb_memory *write_tables(void) #endif -#if CONFIG_GENERATE_MP_TABLE == 1 +#if CONFIG_GENERATE_MP_TABLE #define MAX_MP_TABLE_SIZE (4 * 1024) post_code(0x9b); @@ -120,7 +120,7 @@ struct lb_memory *write_tables(void) } #endif /* CONFIG_GENERATE_MP_TABLE */ -#if CONFIG_GENERATE_ACPI_TABLES == 1 +#if CONFIG_GENERATE_ACPI_TABLES #define MAX_ACPI_SIZE (45 * 1024) post_code(0x9c); diff --git a/src/arch/x86/include/arch/acpi.h b/src/arch/x86/include/arch/acpi.h index be62008cf3..9f790ccf99 100644 --- a/src/arch/x86/include/arch/acpi.h +++ b/src/arch/x86/include/arch/acpi.h @@ -27,7 +27,7 @@ #ifndef __ASM_ACPI_H #define __ASM_ACPI_H -#if CONFIG_GENERATE_ACPI_TABLES==1 +#if CONFIG_GENERATE_ACPI_TABLES #include <stdint.h> diff --git a/src/arch/x86/include/arch/pci_ops.h b/src/arch/x86/include/arch/pci_ops.h index 9c4e029b24..955ccd34d8 100644 --- a/src/arch/x86/include/arch/pci_ops.h +++ b/src/arch/x86/include/arch/pci_ops.h @@ -4,7 +4,7 @@ extern const struct pci_bus_operations pci_cf8_conf1; extern const struct pci_bus_operations pci_cf8_conf2; -#if CONFIG_MMCONF_SUPPORT==1 +#if CONFIG_MMCONF_SUPPORT extern const struct pci_bus_operations pci_ops_mmconf; #endif diff --git a/src/arch/x86/include/arch/pciconf.h b/src/arch/x86/include/arch/pciconf.h index a35693519e..df218171fe 100644 --- a/src/arch/x86/include/arch/pciconf.h +++ b/src/arch/x86/include/arch/pciconf.h @@ -5,7 +5,7 @@ #define PCI_CONF_REG_INDEX 0xcf8 #define PCI_CONF_REG_DATA 0xcfc -#if CONFIG_PCI_IO_CFG_EXT == 0 +#if !CONFIG_PCI_IO_CFG_EXT #define CONFIG_ADDR(bus,devfn,where) (((bus) << 16) | ((devfn) << 8) | (where)) #else #define CONFIG_ADDR(bus,devfn,where) (((bus) << 16) | ((devfn) << 8) | (where & 0xff) | ((where & 0xf00)<<16) ) diff --git a/src/arch/x86/include/arch/pirq_routing.h b/src/arch/x86/include/arch/pirq_routing.h index 0b65eac29b..08ba53506d 100644 --- a/src/arch/x86/include/arch/pirq_routing.h +++ b/src/arch/x86/include/arch/pirq_routing.h @@ -1,7 +1,7 @@ #ifndef ARCH_PIRQ_ROUTING_H #define ARCH_PIRQ_ROUTING_H -#if CONFIG_GENERATE_PIRQ_TABLE==1 +#if CONFIG_GENERATE_PIRQ_TABLE #include <stdint.h> #define PIRQ_SIGNATURE (('$' << 0) + ('P' << 8) + ('I' << 16) + ('R' << 24)) @@ -39,7 +39,7 @@ extern const struct irq_routing_table intel_irq_routing_table; unsigned long copy_pirq_routing_table(unsigned long start); unsigned long write_pirq_routing_table(unsigned long start); -#if CONFIG_PIRQ_ROUTE==1 +#if CONFIG_PIRQ_ROUTE void pirq_routing_irqs(unsigned long start); void pirq_assign_irqs(const unsigned char pIntAtoD[4]); #else diff --git a/src/arch/x86/include/arch/romcc_io.h b/src/arch/x86/include/arch/romcc_io.h index b0c8f65f46..37fb7ab2e0 100644 --- a/src/arch/x86/include/arch/romcc_io.h +++ b/src/arch/x86/include/arch/romcc_io.h @@ -65,7 +65,7 @@ typedef unsigned device_t; /* pci and pci_mmio need to have different ways to ha static inline __attribute__((always_inline)) uint8_t pci_io_read_config8(device_t dev, unsigned where) { unsigned addr; -#if CONFIG_PCI_IO_CFG_EXT == 0 +#if !CONFIG_PCI_IO_CFG_EXT addr = (dev>>4) | where; #else addr = (dev>>4) | (where & 0xff) | ((where & 0xf00)<<16); //seg == 0 @@ -94,7 +94,7 @@ static inline __attribute__((always_inline)) uint8_t pci_read_config8(device_t d static inline __attribute__((always_inline)) uint16_t pci_io_read_config16(device_t dev, unsigned where) { unsigned addr; -#if CONFIG_PCI_IO_CFG_EXT == 0 +#if !CONFIG_PCI_IO_CFG_EXT addr = (dev>>4) | where; #else addr = (dev>>4) | (where & 0xff) | ((where & 0xf00)<<16); @@ -125,7 +125,7 @@ static inline __attribute__((always_inline)) uint16_t pci_read_config16(device_t static inline __attribute__((always_inline)) uint32_t pci_io_read_config32(device_t dev, unsigned where) { unsigned addr; -#if CONFIG_PCI_IO_CFG_EXT == 0 +#if !CONFIG_PCI_IO_CFG_EXT addr = (dev>>4) | where; #else addr = (dev>>4) | (where & 0xff) | ((where & 0xf00)<<16); @@ -155,7 +155,7 @@ static inline __attribute__((always_inline)) uint32_t pci_read_config32(device_t static inline __attribute__((always_inline)) void pci_io_write_config8(device_t dev, unsigned where, uint8_t value) { unsigned addr; -#if CONFIG_PCI_IO_CFG_EXT == 0 +#if !CONFIG_PCI_IO_CFG_EXT addr = (dev>>4) | where; #else addr = (dev>>4) | (where & 0xff) | ((where & 0xf00)<<16); @@ -186,7 +186,7 @@ static inline __attribute__((always_inline)) void pci_write_config8(device_t dev static inline __attribute__((always_inline)) void pci_io_write_config16(device_t dev, unsigned where, uint16_t value) { unsigned addr; -#if CONFIG_PCI_IO_CFG_EXT == 0 +#if !CONFIG_PCI_IO_CFG_EXT addr = (dev>>4) | where; #else addr = (dev>>4) | (where & 0xff) | ((where & 0xf00)<<16); @@ -217,7 +217,7 @@ static inline __attribute__((always_inline)) void pci_write_config16(device_t de static inline __attribute__((always_inline)) void pci_io_write_config32(device_t dev, unsigned where, uint32_t value) { unsigned addr; -#if CONFIG_PCI_IO_CFG_EXT == 0 +#if !CONFIG_PCI_IO_CFG_EXT addr = (dev>>4) | where; #else addr = (dev>>4) | (where & 0xff) | ((where & 0xf00)<<16); diff --git a/src/arch/x86/lib/cbfs_and_run.c b/src/arch/x86/lib/cbfs_and_run.c index 53f06ee5d4..62b2789f53 100644 --- a/src/arch/x86/lib/cbfs_and_run.c +++ b/src/arch/x86/lib/cbfs_and_run.c @@ -50,7 +50,7 @@ void __attribute__((regparm(0))) copy_and_run(unsigned cpu_reset) cbfs_and_run_core(CONFIG_CBFS_PREFIX "/coreboot_ram", cpu_reset); } -#if CONFIG_AP_CODE_IN_CAR == 1 +#if CONFIG_AP_CODE_IN_CAR void __attribute__((regparm(0))) copy_and_run_ap_code_in_car(unsigned ret_addr) { cbfs_and_run_core(CONFIG_CBFS_PREFIX "/coreboot_ap", ret_addr); diff --git a/src/arch/x86/lib/exception.c b/src/arch/x86/lib/exception.c index 91525d5935..4721bc8b16 100644 --- a/src/arch/x86/lib/exception.c +++ b/src/arch/x86/lib/exception.c @@ -365,7 +365,7 @@ void x86_exception(struct eregs *info); void x86_exception(struct eregs *info) { -#if CONFIG_GDB_STUB == 1 +#if CONFIG_GDB_STUB int signo; memcpy(gdb_stub_registers, info, 8*sizeof(uint32_t)); gdb_stub_registers[PC] = info->eip; diff --git a/src/arch/x86/lib/pci_ops_conf1.c b/src/arch/x86/lib/pci_ops_conf1.c index 266a9cc9dc..77df4b314f 100644 --- a/src/arch/x86/lib/pci_ops_conf1.c +++ b/src/arch/x86/lib/pci_ops_conf1.c @@ -8,7 +8,7 @@ * Functions for accessing PCI configuration space with type 1 accesses */ -#if CONFIG_PCI_IO_CFG_EXT == 0 +#if !CONFIG_PCI_IO_CFG_EXT #define CONFIG_CMD(bus,devfn, where) (0x80000000 | (bus << 16) | \ (devfn << 8) | (where & ~3)) #else diff --git a/src/boot/hardwaremain.c b/src/boot/hardwaremain.c index 532135f9ec..f0853ec22f 100644 --- a/src/boot/hardwaremain.c +++ b/src/boot/hardwaremain.c @@ -113,13 +113,13 @@ void hardwaremain(int boot_complete) timestamps[5] = rdtsc(); #endif -#if CONFIG_WRITE_HIGH_TABLES == 1 +#if CONFIG_WRITE_HIGH_TABLES cbmem_initialize(); #if CONFIG_CONSOLE_CBMEM cbmemc_reinit(); #endif #endif -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME suspend_resume(); post_code(0x8a); #endif diff --git a/src/cpu/amd/agesa/family10/model_10_init.c b/src/cpu/amd/agesa/family10/model_10_init.c index 8c1cfaddfc..c216a816e7 100644 --- a/src/cpu/amd/agesa/family10/model_10_init.c +++ b/src/cpu/amd/agesa/family10/model_10_init.c @@ -61,7 +61,7 @@ static void model_10_init(device_t dev) u8 i; msr_t msr; -#if CONFIG_LOGICAL_CPUS == 1 +#if CONFIG_LOGICAL_CPUS u32 siblings; #endif @@ -88,7 +88,7 @@ static void model_10_init(device_t dev) // init_processor_name(); -#if CONFIG_LOGICAL_CPUS == 1 +#if CONFIG_LOGICAL_CPUS siblings = cpuid_ecx(0x80000008) & 0xff; if (siblings > 0) { diff --git a/src/cpu/amd/agesa/family12/model_12_init.c b/src/cpu/amd/agesa/family12/model_12_init.c index 3a12db38bd..4ed477c26d 100644 --- a/src/cpu/amd/agesa/family12/model_12_init.c +++ b/src/cpu/amd/agesa/family12/model_12_init.c @@ -63,7 +63,7 @@ static void model_12_init(device_t dev) u8 i; msr_t msr; -#if CONFIG_LOGICAL_CPUS == 1 +#if CONFIG_LOGICAL_CPUS u32 siblings; #endif @@ -94,7 +94,7 @@ static void model_12_init(device_t dev) // init_processor_name(); -#if CONFIG_LOGICAL_CPUS == 1 +#if CONFIG_LOGICAL_CPUS siblings = cpuid_ecx(0x80000008) & 0xff; if (siblings > 0) { diff --git a/src/cpu/amd/agesa/family14/model_14_init.c b/src/cpu/amd/agesa/family14/model_14_init.c index d90695af4a..9cc36e2b24 100644 --- a/src/cpu/amd/agesa/family14/model_14_init.c +++ b/src/cpu/amd/agesa/family14/model_14_init.c @@ -61,7 +61,7 @@ static void model_14_init(device_t dev) { u32 i; msr_t msr; -#if CONFIG_LOGICAL_CPUS == 1 +#if CONFIG_LOGICAL_CPUS u32 siblings; #endif printk(BIOS_DEBUG, "Model 14 Init.\n"); @@ -94,7 +94,7 @@ static void model_14_init(device_t dev) msr.lo |= SYSCFG_MSR_MtrrFixDramEn; wrmsr(SYSCFG_MSR, msr); -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME if (acpi_slp_type == 3) restore_mtrr(); #endif @@ -112,7 +112,7 @@ static void model_14_init(device_t dev) /* Enable the local cpu apics */ setup_lapic(); -#if CONFIG_LOGICAL_CPUS == 1 +#if CONFIG_LOGICAL_CPUS siblings = cpuid_ecx(0x80000008) & 0xff; if (siblings > 0) { diff --git a/src/cpu/amd/agesa/family15/model_15_init.c b/src/cpu/amd/agesa/family15/model_15_init.c index d100338170..39775ba107 100644 --- a/src/cpu/amd/agesa/family15/model_15_init.c +++ b/src/cpu/amd/agesa/family15/model_15_init.c @@ -59,7 +59,7 @@ static void model_15_init(device_t dev) u8 i; msr_t msr; int msrno; -#if CONFIG_LOGICAL_CPUS == 1 +#if CONFIG_LOGICAL_CPUS u32 siblings; #endif @@ -95,7 +95,7 @@ static void model_15_init(device_t dev) /* Enable the local cpu apics */ setup_lapic(); -#if CONFIG_LOGICAL_CPUS == 1 +#if CONFIG_LOGICAL_CPUS siblings = cpuid_ecx(0x80000008) & 0xff; if (siblings > 0) { diff --git a/src/cpu/amd/car/post_cache_as_ram.c b/src/cpu/amd/car/post_cache_as_ram.c index 270c5420f7..2aa4f302d3 100644 --- a/src/cpu/amd/car/post_cache_as_ram.c +++ b/src/cpu/amd/car/post_cache_as_ram.c @@ -29,7 +29,7 @@ static void inline __attribute__((always_inline)) memcopy(void *dest, const voi : "memory", "cc"); } -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME static inline void *backup_resume(void) { unsigned long high_ram_base; @@ -83,7 +83,7 @@ static void vErrata343(void) static void post_cache_as_ram(void) { -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME void *resume_backup_memory; #endif #if 1 @@ -108,7 +108,7 @@ static void post_cache_as_ram(void) #error "You need to set CONFIG_RAMTOP greater than 1M" #endif -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME resume_backup_memory = backup_resume(); #endif @@ -142,7 +142,7 @@ static void post_cache_as_ram(void) set_var_mtrr(0, 0x00000000, CONFIG_RAMTOP, MTRR_TYPE_WRBACK); enable_cache(); -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME /* now copy the rest of the area, using the WB method because we already run normal RAM */ if (resume_backup_memory) { @@ -154,7 +154,7 @@ static void post_cache_as_ram(void) print_debug("Clearing initial memory region: "); -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME /* clear only coreboot used region of memory. Note: this may break ECC enabled boards */ memset((void*) CONFIG_RAMBASE, 0, (CONFIG_RAMTOP) - CONFIG_RAMBASE - CONFIG_DCACHE_RAM_SIZE); #else diff --git a/src/cpu/amd/dualcore/dualcore.c b/src/cpu/amd/dualcore/dualcore.c index 9c2583f8e0..69ce56a1bd 100644 --- a/src/cpu/amd/dualcore/dualcore.c +++ b/src/cpu/amd/dualcore/dualcore.c @@ -17,7 +17,7 @@ static inline unsigned get_core_num_in_bsp(unsigned nodeid) static inline uint8_t set_apicid_cpuid_lo(void) { -#if CONFIG_K8_REV_F_SUPPORT == 0 +#if !CONFIG_K8_REV_F_SUPPORT if(is_cpu_pre_e0()) return 0; // pre_e0 can not be set #endif diff --git a/src/cpu/amd/model_10xxx/init_cpus.c b/src/cpu/amd/model_10xxx/init_cpus.c index e0538afbc5..edc016a758 100644 --- a/src/cpu/amd/model_10xxx/init_cpus.c +++ b/src/cpu/amd/model_10xxx/init_cpus.c @@ -33,7 +33,7 @@ static void prep_fid_change(void); static void init_fidvid_stage2(u32 apicid, u32 nodeid); void cpuSetAMDMSR(void); -#if CONFIG_PCI_IO_CFG_EXT == 1 +#if CONFIG_PCI_IO_CFG_EXT static void set_EnableCf8ExtCfg(void) { // set the NB_CFG[46]=1; @@ -112,7 +112,7 @@ static void for_each_ap(u32 bsp_apicid, u32 core_range, process_ap_t process_ap, j * (nb_cfg_54 ? 1 : 64); #if (CONFIG_ENABLE_APIC_EXT_ID == 1) && (CONFIG_APIC_ID_OFFSET > 0) -#if CONFIG_LIFT_BSP_APIC_ID == 0 +#if !CONFIG_LIFT_BSP_APIC_ID if ((i != 0) || (j != 0)) /* except bsp */ #endif ap_apicid += CONFIG_APIC_ID_OFFSET; @@ -267,7 +267,7 @@ static u32 init_cpus(u32 cpu_init_detectedx) if (id.coreid == 0) { set_apicid_cpuid_lo(); /* only set it on core0 */ set_EnableCf8ExtCfg(); /* only set it on core0 */ -#if (CONFIG_ENABLE_APIC_EXT_ID == 1) +#if CONFIG_ENABLE_APIC_EXT_ID enable_apic_ext_id(id.nodeid); #endif } @@ -277,7 +277,7 @@ static u32 init_cpus(u32 cpu_init_detectedx) #if (CONFIG_ENABLE_APIC_EXT_ID == 1) && (CONFIG_APIC_ID_OFFSET > 0) u32 initial_apicid = get_initial_apicid(); -#if CONFIG_LIFT_BSP_APIC_ID == 0 +#if !CONFIG_LIFT_BSP_APIC_ID if (initial_apicid != 0) // other than bsp #endif { @@ -289,7 +289,7 @@ static u32 init_cpus(u32 cpu_init_detectedx) lapic_write(LAPIC_ID, dword); } -#if CONFIG_LIFT_BSP_APIC_ID == 1 +#if CONFIG_LIFT_BSP_APIC_ID bsp_apicid += CONFIG_APIC_ID_OFFSET; #endif diff --git a/src/cpu/amd/model_10xxx/model_10xxx_init.c b/src/cpu/amd/model_10xxx/model_10xxx_init.c index cf11135671..27f56c29da 100644 --- a/src/cpu/amd/model_10xxx/model_10xxx_init.c +++ b/src/cpu/amd/model_10xxx/model_10xxx_init.c @@ -63,7 +63,7 @@ static void model_10xxx_init(device_t dev) u8 i; msr_t msr; struct node_core_id id; -#if CONFIG_LOGICAL_CPUS == 1 +#if CONFIG_LOGICAL_CPUS u32 siblings; #endif @@ -92,7 +92,7 @@ static void model_10xxx_init(device_t dev) /* Set the processor name string */ init_processor_name(); -#if CONFIG_LOGICAL_CPUS == 1 +#if CONFIG_LOGICAL_CPUS siblings = cpuid_ecx(0x80000008) & 0xff; if (siblings > 0) { diff --git a/src/cpu/amd/model_fxx/init_cpus.c b/src/cpu/amd/model_fxx/init_cpus.c index 00362777bc..2ae9aaced7 100644 --- a/src/cpu/amd/model_fxx/init_cpus.c +++ b/src/cpu/amd/model_fxx/init_cpus.c @@ -40,7 +40,7 @@ static void for_each_ap(u32 bsp_apicid, u32 core_range, process_ap_t process_ap, 3); if (nb_cfg_54) { if (j == 0) { // if it is single core, we need to increase siblings for apic calculation -#if CONFIG_K8_REV_F_SUPPORT == 0 +#if !CONFIG_K8_REV_F_SUPPORT e0_later_single_core = is_e0_later_in_bsp(i); // single core #else e0_later_single_core = is_cpu_f0_in_bsp(i); // We can read cpuid(1) from Func3 @@ -72,8 +72,8 @@ static void for_each_ap(u32 bsp_apicid, u32 core_range, process_ap_t process_ap, i * (nb_cfg_54 ? (siblings + 1) : 1) + j * (nb_cfg_54 ? 1 : 8); -#if (CONFIG_ENABLE_APIC_EXT_ID == 1) -#if CONFIG_LIFT_BSP_APIC_ID == 0 +#if CONFIG_ENABLE_APIC_EXT_ID +#if !CONFIG_LIFT_BSP_APIC_ID if ((i != 0) || (j != 0)) /* except bsp */ #endif ap_apicid += CONFIG_APIC_ID_OFFSET; @@ -215,7 +215,7 @@ static u32 init_cpus(u32 cpu_init_detectedx) core0 is done at first --- use wait_all_core0_started */ if (id.coreid == 0) { set_apicid_cpuid_lo(); /* only set it on core0 */ -#if (CONFIG_ENABLE_APIC_EXT_ID == 1) +#if CONFIG_ENABLE_APIC_EXT_ID enable_apic_ext_id(id.nodeid); #endif } @@ -223,10 +223,10 @@ static u32 init_cpus(u32 cpu_init_detectedx) enable_lapic(); // init_timer(); // We need TMICT to pass msg for FID/VID change -#if (CONFIG_ENABLE_APIC_EXT_ID == 1) +#if CONFIG_ENABLE_APIC_EXT_ID u32 initial_apicid = get_initial_apicid(); -#if CONFIG_LIFT_BSP_APIC_ID == 0 +#if !CONFIG_LIFT_BSP_APIC_ID if (initial_apicid != 0) // other than bsp #endif { @@ -238,7 +238,7 @@ static u32 init_cpus(u32 cpu_init_detectedx) lapic_write(LAPIC_ID, dword); } -#if CONFIG_LIFT_BSP_APIC_ID == 1 +#if CONFIG_LIFT_BSP_APIC_ID bsp_apicid += CONFIG_APIC_ID_OFFSET; #endif diff --git a/src/cpu/amd/model_fxx/model_fxx_init.c b/src/cpu/amd/model_fxx/model_fxx_init.c index ae5429d05d..e34e6f7e20 100644 --- a/src/cpu/amd/model_fxx/model_fxx_init.c +++ b/src/cpu/amd/model_fxx/model_fxx_init.c @@ -39,7 +39,7 @@ void cpus_ready_for_init(void) } #endif -#if CONFIG_K8_REV_F_SUPPORT == 0 +#if !CONFIG_K8_REV_F_SUPPORT int is_e0_later_in_bsp(int nodeid) { uint32_t val; @@ -67,7 +67,7 @@ int is_e0_later_in_bsp(int nodeid) } #endif -#if CONFIG_K8_REV_F_SUPPORT == 1 +#if CONFIG_K8_REV_F_SUPPORT int is_cpu_f0_in_bsp(int nodeid) { uint32_t dword; @@ -298,7 +298,7 @@ static void init_ecc_memory(unsigned node_id) #if CONFIG_HW_MEM_HOLE_SIZEK != 0 unsigned long hole_startk = 0; -#if CONFIG_K8_REV_F_SUPPORT == 0 +#if !CONFIG_K8_REV_F_SUPPORT if (!is_cpu_pre_e0()) { #endif @@ -307,7 +307,7 @@ static void init_ecc_memory(unsigned node_id) if (val & 1) { hole_startk = ((val & (0xff << 24)) >> 10); } -#if CONFIG_K8_REV_F_SUPPORT == 0 +#if !CONFIG_K8_REV_F_SUPPORT } #endif #endif @@ -370,7 +370,7 @@ static void init_ecc_memory(unsigned node_id) static inline void k8_errata(void) { msr_t msr; -#if CONFIG_K8_REV_F_SUPPORT == 0 +#if !CONFIG_K8_REV_F_SUPPORT if (is_cpu_pre_c0()) { /* Erratum 63... */ msr = rdmsr(HWCR_MSR); @@ -437,14 +437,14 @@ static inline void k8_errata(void) #endif -#if CONFIG_K8_REV_F_SUPPORT == 0 +#if !CONFIG_K8_REV_F_SUPPORT /* I can't touch this msr on early buggy cpus */ if (!is_cpu_pre_b3()) #endif { msr = rdmsr(NB_CFG_MSR); -#if CONFIG_K8_REV_F_SUPPORT == 0 +#if !CONFIG_K8_REV_F_SUPPORT if (!is_cpu_pre_c0() && is_cpu_pre_d0()) { /* D0 later don't need it */ /* Erratum 86 Disable data masking on C0 and @@ -523,7 +523,7 @@ static void model_fxx_init(device_t dev) /* Enable the local cpu apics */ setup_lapic(); -#if CONFIG_LOGICAL_CPUS == 1 +#if CONFIG_LOGICAL_CPUS u32 siblings = cpuid_ecx(0x80000008) & 0xff; if (siblings > 0) { @@ -570,7 +570,7 @@ static struct device_operations cpu_dev_ops = { }; static struct cpu_device_id cpu_table[] = { -#if CONFIG_K8_REV_F_SUPPORT == 0 +#if !CONFIG_K8_REV_F_SUPPORT { X86_VENDOR_AMD, 0xf40 }, /* SH-B0 (socket 754) */ { X86_VENDOR_AMD, 0xf50 }, /* SH-B0 (socket 940) */ { X86_VENDOR_AMD, 0xf51 }, /* SH-B3 (socket 940) */ @@ -612,7 +612,7 @@ static struct cpu_device_id cpu_table[] = { { X86_VENDOR_AMD, 0x30ff2 }, /* E4 ? */ #endif -#if CONFIG_K8_REV_F_SUPPORT == 1 +#if CONFIG_K8_REV_F_SUPPORT /* * AMD F0 support. * diff --git a/src/cpu/amd/model_fxx/model_fxx_update_microcode.c b/src/cpu/amd/model_fxx/model_fxx_update_microcode.c index 5cc0fba476..69769c9905 100644 --- a/src/cpu/amd/model_fxx/model_fxx_update_microcode.c +++ b/src/cpu/amd/model_fxx/model_fxx_update_microcode.c @@ -27,13 +27,13 @@ static uint8_t microcode_updates[] __attribute__ ((aligned(16))) = { -#if CONFIG_K8_REV_F_SUPPORT == 0 +#if !CONFIG_K8_REV_F_SUPPORT #include "microcode_rev_c.h" #include "microcode_rev_d.h" #include "microcode_rev_e.h" #endif -#if CONFIG_K8_REV_F_SUPPORT == 1 +#if CONFIG_K8_REV_F_SUPPORT // #include "microcode_rev_f.h" #endif /* Dummy terminator */ @@ -45,7 +45,7 @@ static uint8_t microcode_updates[] __attribute__ ((aligned(16))) = { static unsigned get_equivalent_processor_rev_id(unsigned orig_id) { static unsigned id_mapping_table[] = { - #if CONFIG_K8_REV_F_SUPPORT == 0 + #if !CONFIG_K8_REV_F_SUPPORT 0x0f48, 0x0048, 0x0f58, 0x0048, @@ -68,7 +68,7 @@ static unsigned get_equivalent_processor_rev_id(unsigned orig_id) { 0x20fb1, 0x0210, #endif - #if CONFIG_K8_REV_F_SUPPORT == 1 + #if CONFIG_K8_REV_F_SUPPORT #endif diff --git a/src/cpu/amd/model_fxx/powernow_acpi.c b/src/cpu/amd/model_fxx/powernow_acpi.c index 83d34f1058..81b1067398 100644 --- a/src/cpu/amd/model_fxx/powernow_acpi.c +++ b/src/cpu/amd/model_fxx/powernow_acpi.c @@ -632,7 +632,7 @@ static int pstates_algorithm(u32 pcontrol_blk, u8 plen, u8 onlyBSP) return 0; } -#if CONFIG_MAX_PHYSICAL_CPUS==1 +#if CONFIG_MAX_PHYSICAL_CPUS /* IRT 80us RVO = 50mV PLL_LOCK_TIME 2us, MVS 25mv, VST 100us */ control = (3 << 30) | (2 << 28) | (2 << 20) | (0 << 18) | (5 << 11); #else diff --git a/src/cpu/amd/model_fxx/processor_name.c b/src/cpu/amd/model_fxx/processor_name.c index 3f3d973d7d..6f45b0f8cd 100644 --- a/src/cpu/amd/model_fxx/processor_name.c +++ b/src/cpu/amd/model_fxx/processor_name.c @@ -42,7 +42,7 @@ * your mainboard will not be posted on the AMD Recommended Motherboard Website */ -#if CONFIG_K8_REV_F_SUPPORT == 0 +#if !CONFIG_K8_REV_F_SUPPORT static const char *processor_names[]={ /* 0x00 */ "AMD Engineering Sample", /* 0x01-0x03 */ NULL, NULL, NULL, @@ -113,7 +113,7 @@ static inline void wrmsr_amd(unsigned index, msr_t msr) int init_processor_name(void) { -#if CONFIG_K8_REV_F_SUPPORT == 0 +#if !CONFIG_K8_REV_F_SUPPORT u32 EightBitBrandId; #endif u32 BrandId; @@ -127,7 +127,7 @@ int init_processor_name(void) char program_string[48]; unsigned int *program_values = (unsigned int *)program_string; -#if CONFIG_K8_REV_F_SUPPORT == 0 +#if !CONFIG_K8_REV_F_SUPPORT /* Find out which CPU brand it is */ EightBitBrandId = cpuid_ebx(0x00000001) & 0xff; BrandId = cpuid_ebx(0x80000001) & 0xffff; @@ -151,7 +151,7 @@ int init_processor_name(void) processor_name_string = "AMD Processor model unknown"; #endif -#if CONFIG_K8_REV_F_SUPPORT == 1 +#if CONFIG_K8_REV_F_SUPPORT u32 Socket; u32 CmpCap; u32 PwrLmt; @@ -407,7 +407,7 @@ int init_processor_name(void) for (i=0; i<47; i++) { // 48 -1 if(program_string[i] == program_string[i+1]) { switch (program_string[i]) { -#if CONFIG_K8_REV_F_SUPPORT == 0 +#if !CONFIG_K8_REV_F_SUPPORT case 'X': ModelNumber = 22+ NN; break; case 'Y': ModelNumber = 38 + (2*NN); break; case 'Z': @@ -416,7 +416,7 @@ int init_processor_name(void) case 'V': ModelNumber = 9 + NN; break; #endif -#if CONFIG_K8_REV_F_SUPPORT == 1 +#if CONFIG_K8_REV_F_SUPPORT case 'R': ModelNumber = NN - 1; break; case 'P': ModelNumber = 26 + NN; break; case 'T': ModelNumber = 15 + (CmpCap * 10) + NN; break; diff --git a/src/cpu/amd/mtrr/amd_mtrr.c b/src/cpu/amd/mtrr/amd_mtrr.c index 54a70e2d91..5c48cfd96c 100644 --- a/src/cpu/amd/mtrr/amd_mtrr.c +++ b/src/cpu/amd/mtrr/amd_mtrr.c @@ -6,7 +6,7 @@ #include <cpu/x86/cache.h> #include <cpu/x86/msr.h> -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA extern uint64_t uma_memory_size; #endif @@ -163,7 +163,7 @@ void amd_setup_mtrrs(void) * has been deducted from the size of memory below 4GB. * When setting TOM, include UMA DRAM */ - #if CONFIG_GFXUMA == 1 + #if CONFIG_GFXUMA msr.lo += uma_memory_size; #endif wrmsr(TOP_MEM, msr); diff --git a/src/cpu/intel/hyperthreading/intel_sibling.c b/src/cpu/intel/hyperthreading/intel_sibling.c index e988664dda..2d2e105f8d 100644 --- a/src/cpu/intel/hyperthreading/intel_sibling.c +++ b/src/cpu/intel/hyperthreading/intel_sibling.c @@ -7,7 +7,7 @@ #include <smp/spinlock.h> #include <assert.h> -#if CONFIG_SERIAL_CPU_INIT==0 +#if !CONFIG_SERIAL_CPU_INIT #error Intel hyper-threading requires serialized cpu init #endif diff --git a/src/cpu/x86/lapic/lapic_cpu_init.c b/src/cpu/x86/lapic/lapic_cpu_init.c index f8239812a5..e491d46af2 100644 --- a/src/cpu/x86/lapic/lapic_cpu_init.c +++ b/src/cpu/x86/lapic/lapic_cpu_init.c @@ -16,7 +16,7 @@ #include <cpu/cpu.h> #include <cpu/intel/speedstep.h> -#if CONFIG_SMP == 1 +#if CONFIG_SMP /* This is a lot more paranoid now, since Linux can NOT handle * being told there is a CPU when none exists. So any errors * will return 0, meaning no CPU. @@ -29,7 +29,7 @@ static unsigned long get_valid_start_eip(unsigned long orig_start_eip) return (unsigned long)orig_start_eip & 0xffff; // 16 bit to avoid 0xa0000 } -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME char *lowmem_backup; char *lowmem_backup_ptr; int lowmem_backup_size; @@ -49,7 +49,7 @@ static void copy_secondary_start_to_1m_below(void) start_eip = get_valid_start_eip((unsigned long)_secondary_start); code_size = (unsigned long)_secondary_start_end - (unsigned long)_secondary_start; -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME /* need to save it for RAM resume */ lowmem_backup_size = code_size; lowmem_backup = malloc(code_size); @@ -277,7 +277,7 @@ int start_cpu(device_t cpu) return result; } -#if CONFIG_AP_IN_SIPI_WAIT == 1 +#if CONFIG_AP_IN_SIPI_WAIT /** * Sending INIT IPI to self is equivalent of asserting #INIT with a bit of delay. @@ -384,7 +384,7 @@ static __inline__ __attribute__((always_inline)) void writecr4(unsigned long Dat void secondary_cpu_init(void) { atomic_inc(&active_cpus); -#if CONFIG_SERIAL_CPU_INIT == 1 +#if CONFIG_SERIAL_CPU_INIT spin_lock(&start_cpu_lock); #endif @@ -399,7 +399,7 @@ void secondary_cpu_init(void) writecr4(cr4_val); #endif cpu_initialize(); -#if CONFIG_SERIAL_CPU_INIT == 1 +#if CONFIG_SERIAL_CPU_INIT spin_unlock(&start_cpu_lock); #endif @@ -417,7 +417,7 @@ static void start_other_cpus(struct bus *cpu_bus, device_t bsp_cpu) if (cpu->path.type != DEVICE_PATH_APIC) { continue; } - #if CONFIG_SERIAL_CPU_INIT == 0 + #if !CONFIG_SERIAL_CPU_INIT if(cpu==bsp_cpu) { continue; } @@ -436,7 +436,7 @@ static void start_other_cpus(struct bus *cpu_bus, device_t bsp_cpu) printk(BIOS_ERR, "CPU 0x%02x would not start!\n", cpu->path.apic.apic_id); } -#if CONFIG_SERIAL_CPU_INIT == 1 +#if CONFIG_SERIAL_CPU_INIT udelay(10); #endif } @@ -502,7 +502,7 @@ void initialize_cpus(struct bus *cpu_bus) /* Find the device structure for the boot cpu */ info->cpu = alloc_find_dev(cpu_bus, &cpu_path); -#if CONFIG_SMP == 1 +#if CONFIG_SMP copy_secondary_start_to_1m_below(); // why here? In case some day we can start core1 in amd_sibling_init #endif @@ -512,8 +512,8 @@ void initialize_cpus(struct bus *cpu_bus) cpus_ready_for_init(); -#if CONFIG_SMP == 1 - #if CONFIG_SERIAL_CPU_INIT == 0 +#if CONFIG_SMP + #if !CONFIG_SERIAL_CPU_INIT /* start all aps at first, so we can init ECC all together */ start_other_cpus(cpu_bus, info->cpu); #endif @@ -522,8 +522,8 @@ void initialize_cpus(struct bus *cpu_bus) /* Initialize the bootstrap processor */ cpu_initialize(); -#if CONFIG_SMP == 1 - #if CONFIG_SERIAL_CPU_INIT == 1 +#if CONFIG_SMP + #if CONFIG_SERIAL_CPU_INIT start_other_cpus(cpu_bus, info->cpu); #endif diff --git a/src/devices/device.c b/src/devices/device.c index 0e9c39e203..ebac1a073e 100644 --- a/src/devices/device.c +++ b/src/devices/device.c @@ -536,7 +536,7 @@ static void allocate_resources(struct bus *bus, struct resource *bridge, } } -#if CONFIG_PCI_64BIT_PREF_MEM == 1 +#if CONFIG_PCI_64BIT_PREF_MEM #define MEM_MASK (IORESOURCE_PREFETCH | IORESOURCE_MEM) #else #define MEM_MASK (IORESOURCE_MEM) @@ -676,7 +676,7 @@ static void avoid_fixed_resources(struct device *dev) } } -#if CONFIG_VGA_BRIDGE_SETUP == 1 +#if CONFIG_VGA_BRIDGE_SETUP device_t vga_pri = 0; static void set_vga_bridge_bits(void) { @@ -725,7 +725,7 @@ static void set_vga_bridge_bits(void) if (!vga) vga = vga_first; -#if CONFIG_ONBOARD_VGA_IS_PRIMARY == 1 +#if CONFIG_ONBOARD_VGA_IS_PRIMARY if (vga_onboard) /* Will use onboard VGA as primary. */ #else if (!vga) /* Will use last add-on adapter as primary. */ @@ -935,7 +935,7 @@ void dev_configure(void) struct device *root; struct device *child; -#if CONFIG_VGA_BRIDGE_SETUP == 1 +#if CONFIG_VGA_BRIDGE_SETUP set_vga_bridge_bits(); #endif diff --git a/src/devices/hypertransport.c b/src/devices/hypertransport.c index 926729177e..420054ecb3 100644 --- a/src/devices/hypertransport.c +++ b/src/devices/hypertransport.c @@ -103,9 +103,9 @@ static unsigned ht_read_freq_cap(device_t dev, unsigned pos) /* AMD K8 unsupported 1GHz? */ if ((dev->vendor == PCI_VENDOR_ID_AMD) && (dev->device == 0x1100)) { -#if CONFIG_K8_HT_FREQ_1G_SUPPORT == 1 +#if CONFIG_K8_HT_FREQ_1G_SUPPORT -#if CONFIG_K8_REV_F_SUPPORT == 0 +#if !CONFIG_K8_REV_F_SUPPORT /* Only e0 later suupport 1GHz HT. */ if (is_cpu_pre_e0()) freq_cap &= ~(1 << HT_FREQ_1000Mhz); @@ -351,7 +351,7 @@ static void ht_collapse_early_enumeration(struct bus *bus, } while ((ctrl & (1 << 5)) == 0); /* Actually, only for one HT device HT chain, and unitid is 0. */ -#if CONFIG_HT_CHAIN_UNITID_BASE == 0 +#if !CONFIG_HT_CHAIN_UNITID_BASE if (offset_unitid) return; #endif diff --git a/src/devices/pci_device.c b/src/devices/pci_device.c index c9af7c4cc8..7fa738448d 100644 --- a/src/devices/pci_device.c +++ b/src/devices/pci_device.c @@ -33,22 +33,22 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <delay.h> -#if CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT == 1 +#if CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT #include <device/hypertransport.h> #endif -#if CONFIG_PCIX_PLUGIN_SUPPORT == 1 +#if CONFIG_PCIX_PLUGIN_SUPPORT #include <device/pcix.h> #endif -#if CONFIG_PCIEXP_PLUGIN_SUPPORT == 1 +#if CONFIG_PCIEXP_PLUGIN_SUPPORT #include <device/pciexp.h> #endif -#if CONFIG_AGP_PLUGIN_SUPPORT == 1 +#if CONFIG_AGP_PLUGIN_SUPPORT #include <device/agp.h> #endif -#if CONFIG_CARDBUS_PLUGIN_SUPPORT == 1 +#if CONFIG_CARDBUS_PLUGIN_SUPPORT #include <device/cardbus.h> #endif -#if CONFIG_PC80_SYSTEM == 1 +#if CONFIG_PC80_SYSTEM #include <pc80/i8259.h> #endif #if CONFIG_HAVE_ACPI_RESUME && !CONFIG_S3_VGA_ROM_RUN @@ -748,17 +748,17 @@ static struct device_operations *get_pci_bridge_ops(device_t dev) { unsigned int pos; -#if CONFIG_PCIX_PLUGIN_SUPPORT == 1 +#if CONFIG_PCIX_PLUGIN_SUPPORT pos = pci_find_capability(dev, PCI_CAP_ID_PCIX); if (pos) { printk(BIOS_DEBUG, "%s subordinate bus PCI-X\n", dev_path(dev)); return &default_pcix_ops_bus; } #endif -#if CONFIG_AGP_PLUGIN_SUPPORT == 1 +#if CONFIG_AGP_PLUGIN_SUPPORT /* How do I detect a PCI to AGP bridge? */ #endif -#if CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT == 1 +#if CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT pos = 0; while ((pos = pci_find_next_capability(dev, PCI_CAP_ID_HT, pos))) { u16 flags; @@ -771,7 +771,7 @@ static struct device_operations *get_pci_bridge_ops(device_t dev) } } #endif -#if CONFIG_PCIEXP_PLUGIN_SUPPORT == 1 +#if CONFIG_PCIEXP_PLUGIN_SUPPORT pos = pci_find_capability(dev, PCI_CAP_ID_PCIE); if (pos) { u16 flags; @@ -860,7 +860,7 @@ static void set_pci_ops(struct device *dev) goto bad; dev->ops = get_pci_bridge_ops(dev); break; -#if CONFIG_CARDBUS_PLUGIN_SUPPORT == 1 +#if CONFIG_CARDBUS_PLUGIN_SUPPORT case PCI_HEADER_TYPE_CARDBUS: dev->ops = &default_cardbus_ops_bus; break; @@ -1256,7 +1256,7 @@ unsigned int pci_domain_scan_bus(device_t dev, unsigned int max) return max; } -#if CONFIG_PC80_SYSTEM == 1 +#if CONFIG_PC80_SYSTEM /** * Assign IRQ numbers. * @@ -1305,7 +1305,7 @@ void pci_assign_irqs(unsigned bus, unsigned slot, printk(BIOS_DEBUG, " Readback = %d\n", irq); #endif -#if CONFIG_PC80_SYSTEM == 1 +#if CONFIG_PC80_SYSTEM /* Change to level triggered. */ i8259_configure_irq_trigger(pIntAtoD[line - 1], IRQ_LEVEL_TRIGGERED); diff --git a/src/devices/pci_rom.c b/src/devices/pci_rom.c index e7933eba08..fe67515936 100644 --- a/src/devices/pci_rom.c +++ b/src/devices/pci_rom.c @@ -151,7 +151,7 @@ struct rom_header *pci_rom_load(struct device *dev, * devices have a mismatch between the hardware and the ROM. */ if (PCI_CLASS_DISPLAY_VGA == (dev->class >> 8)) { -#if CONFIG_MULTIPLE_VGA_ADAPTERS == 0 +#if !CONFIG_MULTIPLE_VGA_ADAPTERS extern device_t vga_pri; /* Primary VGA device (device.c). */ if (dev != vga_pri) return NULL; /* Only one VGA supported. */ #endif diff --git a/src/drivers/ati/ragexl/atyfb.h b/src/drivers/ati/ragexl/atyfb.h index 99a87b3371..557ead7752 100644 --- a/src/drivers/ati/ragexl/atyfb.h +++ b/src/drivers/ati/ragexl/atyfb.h @@ -8,7 +8,7 @@ #define max(x,y) (x>=y)?x:y -#if CONFIG_CONSOLE_BTEXT==1 +#if CONFIG_CONSOLE_BTEXT /* * Elements of the hardware specific atyfb_par structure */ @@ -73,7 +73,7 @@ union aty_pll { * The hardware parameters for each card */ struct atyfb_par { -#if CONFIG_CONSOLE_BTEXT==1 +#if CONFIG_CONSOLE_BTEXT struct crtc crtc; #endif union aty_pll pll; @@ -97,7 +97,7 @@ struct aty_cursor { }; #endif struct fb_info_aty { -#if CONFIG_CONSOLE_BTEXT==1 +#if CONFIG_CONSOLE_BTEXT #if PLL_CRTC_DECODE==1 struct fb_info fb_info; #endif diff --git a/src/drivers/ati/ragexl/mach64_ct.c b/src/drivers/ati/ragexl/mach64_ct.c index b34be821fb..9b45f2a1fb 100644 --- a/src/drivers/ati/ragexl/mach64_ct.c +++ b/src/drivers/ati/ragexl/mach64_ct.c @@ -284,7 +284,7 @@ int aty_var_to_pll_ct(const struct fb_info_aty *info, u32 vclk_per, aty_calc_pll_ct(info, &pll->ct); return 0; } -#if CONFIG_CONSOLE_BTEXT==1 +#if CONFIG_CONSOLE_BTEXT #if PLL_CRTC_DECODE==1 u32 aty_pll_ct_to_var(const struct fb_info_aty *info, const union aty_pll *pll) diff --git a/src/drivers/ati/ragexl/xlinit.c b/src/drivers/ati/ragexl/xlinit.c index 747b343cc8..36a06199b7 100644 --- a/src/drivers/ati/ragexl/xlinit.c +++ b/src/drivers/ati/ragexl/xlinit.c @@ -28,7 +28,7 @@ // Hence do only remove this if you fix the code. #define CONFIG_CONSOLE_BTEXT 0 -#if CONFIG_CONSOLE_BTEXT==1 +#if CONFIG_CONSOLE_BTEXT #define PLL_CRTC_DECODE 0 #define SUPPORT_8_BPP_ABOVE 0 @@ -393,7 +393,7 @@ static char m64n_xl_33[] = "3D RAGE (XL PCI-33MHz)"; static char m64n_xl_66[] = "3D RAGE (XL PCI-66MHz)"; -#if CONFIG_CONSOLE_BTEXT==1 +#if CONFIG_CONSOLE_BTEXT static void aty_set_crtc(const struct fb_info_aty *info, const struct crtc *crtc); static int aty_var_to_crtc(const struct fb_info_aty *info, @@ -455,7 +455,7 @@ static struct { /* 3D RAGE XL PCI-33/BGA */ { 0x4752, 0x4752, 0x00, 0x00, m64n_xl_33, 230, 83, 63, M64F_GT | M64F_INTEGRATED | M64F_RESET_3D | M64F_GTB_DSP | M64F_SDRAM_MAGIC_PLL | M64F_EXTRA_BRIGHT | M64F_XL_DLL | M64F_MFB_TIMES_4 }, }; -#if CONFIG_CONSOLE_BTEXT==1 +#if CONFIG_CONSOLE_BTEXT static void aty_calc_mem_refresh(struct fb_info_aty *info, u16 id, int xclk) { int i, size; @@ -502,7 +502,7 @@ static void ati_ragexl_init(device_t dev) #endif int pll, mclk, xclk; -#if CONFIG_CONSOLE_BTEXT==1 +#if CONFIG_CONSOLE_BTEXT #if 0 int gtb_memsize, k; @@ -532,7 +532,7 @@ static void ati_ragexl_init(device_t dev) res = res->next; } -#if CONFIG_CONSOLE_BTEXT==1 +#if CONFIG_CONSOLE_BTEXT info->frame_buffer = res->base; #endif /* CONFIG_CONSOLE_BTEXT */ @@ -548,7 +548,7 @@ static void ati_ragexl_init(device_t dev) #endif -#if CONFIG_CONSOLE_BTEXT==1 +#if CONFIG_CONSOLE_BTEXT info->aty_cmap_regs = (struct aty_cmap_regs *)(info->ati_regbase+0xc0); #endif @@ -581,7 +581,7 @@ found: mclk = 63; } #endif -#if CONFIG_CONSOLE_BTEXT==1 +#if CONFIG_CONSOLE_BTEXT aty_calc_mem_refresh(info, type, xclk); #endif /* CONFIG_CONSOLE_BTEXT */ @@ -596,7 +596,7 @@ found: atyfb_xl_init(info); -#if CONFIG_CONSOLE_BTEXT==1 +#if CONFIG_CONSOLE_BTEXT info->ram_type = (aty_ld_le32(CONFIG_STAT0, info) & 0x07); @@ -803,7 +803,7 @@ found: } -#if CONFIG_CONSOLE_BTEXT==1 +#if CONFIG_CONSOLE_BTEXT static int atyfb_decode_var(const struct fb_var_screeninfo *var, struct atyfb_par *par, diff --git a/src/include/cpu/amd/model_fxx_rev.h b/src/include/cpu/amd/model_fxx_rev.h index 56381e389e..1e8559692d 100644 --- a/src/include/cpu/amd/model_fxx_rev.h +++ b/src/include/cpu/amd/model_fxx_rev.h @@ -2,7 +2,7 @@ int init_processor_name(void); -#if CONFIG_K8_REV_F_SUPPORT == 0 +#if !CONFIG_K8_REV_F_SUPPORT static inline int is_cpu_rev_a0(void) { return (cpuid_eax(1) & 0xfffef) == 0x0f00; @@ -79,7 +79,7 @@ int is_e0_later_in_bsp(int nodeid); //defined model_fxx_init.c #endif -#if CONFIG_K8_REV_F_SUPPORT == 1 +#if CONFIG_K8_REV_F_SUPPORT //AMD_F0_SUPPORT static inline int is_cpu_pre_f0(void) { diff --git a/src/include/cpu/x86/lapic.h b/src/include/cpu/x86/lapic.h index 2215ec7ee5..078f2a7c62 100644 --- a/src/include/cpu/x86/lapic.h +++ b/src/include/cpu/x86/lapic.h @@ -147,7 +147,7 @@ static inline int lapic_remote_read(int apicid, int reg, unsigned long *pvalue) void setup_lapic(void); -#if CONFIG_SMP == 1 +#if CONFIG_SMP struct device; int start_cpu(struct device *cpu); #endif /* CONFIG_SMP */ diff --git a/src/include/delay.h b/src/include/delay.h index 5d0dc01790..0333879c34 100644 --- a/src/include/delay.h +++ b/src/include/delay.h @@ -3,7 +3,7 @@ #if !defined( __ROMCC__) -#if CONFIG_HAVE_INIT_TIMER == 1 +#if CONFIG_HAVE_INIT_TIMER void init_timer(void); #else #define init_timer() do{} while(0) diff --git a/src/include/reset.h b/src/include/reset.h index 3d72a8cc0a..79bf6d5b20 100644 --- a/src/include/reset.h +++ b/src/include/reset.h @@ -4,7 +4,7 @@ #if !defined( __ROMCC__ ) /* ROMCC can't do function prototypes... */ -#if CONFIG_HAVE_HARD_RESET == 1 +#if CONFIG_HAVE_HARD_RESET void hard_reset(void); #else #define hard_reset() do {} while(0) diff --git a/src/include/smp/atomic.h b/src/include/smp/atomic.h index 8da08a2250..44be4c5c01 100644 --- a/src/include/smp/atomic.h +++ b/src/include/smp/atomic.h @@ -1,7 +1,7 @@ #ifndef SMP_ATOMIC_H #define SMP_ATOMIC_H -#if CONFIG_SMP == 1 +#if CONFIG_SMP #include <arch/smp/atomic.h> #else diff --git a/src/include/smp/spinlock.h b/src/include/smp/spinlock.h index 1b0b4fdde9..87298b1c48 100644 --- a/src/include/smp/spinlock.h +++ b/src/include/smp/spinlock.h @@ -1,7 +1,7 @@ #ifndef SMP_SPINLOCK_H #define SMP_SPINLOCK_H -#if CONFIG_SMP == 1 +#if CONFIG_SMP #include <arch/smp/spinlock.h> #else /* !CONFIG_SMP */ diff --git a/src/include/watchdog.h b/src/include/watchdog.h index 98d6d51865..d6267375f5 100644 --- a/src/include/watchdog.h +++ b/src/include/watchdog.h @@ -1,7 +1,7 @@ #ifndef WATCHDOG_H #define WATCHDOG_H -#if CONFIG_USE_WATCHDOG_ON_BOOT == 1 +#if CONFIG_USE_WATCHDOG_ON_BOOT void watchdog_off(void); #else #define watchdog_off() diff --git a/src/mainboard/advansus/a785e-i/acpi_tables.c b/src/mainboard/advansus/a785e-i/acpi_tables.c index 9642bb4e19..fa93842dfc 100644 --- a/src/mainboard/advansus/a785e-i/acpi_tables.c +++ b/src/mainboard/advansus/a785e-i/acpi_tables.c @@ -236,7 +236,7 @@ unsigned long write_acpi_tables(unsigned long start) acpi_create_facs(facs); /* FDAT */ -#if CONFIG_BOARD_HAS_FADT == 1 +#if CONFIG_BOARD_HAS_FADT current = ALIGN(current, 8); printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); fadt = (acpi_fadt_t *) current; diff --git a/src/mainboard/advansus/a785e-i/get_bus_conf.c b/src/mainboard/advansus/a785e-i/get_bus_conf.c index 5c21e09d53..fcf0bd9100 100644 --- a/src/mainboard/advansus/a785e-i/get_bus_conf.c +++ b/src/mainboard/advansus/a785e-i/get_bus_conf.c @@ -23,7 +23,7 @@ #include <string.h> #include <stdint.h> #include <stdlib.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif #include <cpu/amd/amdfam10_sysconf.h> @@ -141,7 +141,7 @@ void get_bus_conf(void) /* I/O APICs: APIC ID Version State Address */ bus_isa = 10; -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/advansus/a785e-i/mainboard.c b/src/mainboard/advansus/a785e-i/mainboard.c index ff2d39550d..afa82f3eeb 100644 --- a/src/mainboard/advansus/a785e-i/mainboard.c +++ b/src/mainboard/advansus/a785e-i/mainboard.c @@ -84,7 +84,7 @@ static void a785e_i_enable(device_t dev) printk(BIOS_INFO, "Mainboard A785E-I Enable. dev=0x%p\n", dev); -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA msr_t msr, msr2; /* TOP_MEM: the top of DRAM below 4G */ @@ -133,7 +133,7 @@ int add_mainboard_resources(struct lb_memory *mem) /* UMA is removed from system memory in the northbridge code, but * in some circumstances we want the memory mentioned as reserved. */ -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, diff --git a/src/mainboard/advansus/a785e-i/mptable.c b/src/mainboard/advansus/a785e-i/mptable.c index 8643320101..818d4be9f5 100644 --- a/src/mainboard/advansus/a785e-i/mptable.c +++ b/src/mainboard/advansus/a785e-i/mptable.c @@ -79,7 +79,7 @@ static void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_GENERATE_ACPI_TABLES == 0 +#if !CONFIG_GENERATE_ACPI_TABLES #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb800, (pin)) #else diff --git a/src/mainboard/advansus/a785e-i/platform_cfg.h b/src/mainboard/advansus/a785e-i/platform_cfg.h index 5fd49d6b6a..98e2c941c4 100644 --- a/src/mainboard/advansus/a785e-i/platform_cfg.h +++ b/src/mainboard/advansus/a785e-i/platform_cfg.h @@ -36,7 +36,7 @@ * bigger than 1M you have to set the ROM size outside CIMx module and * before AGESA module get call. */ -#if CONFIG_COREBOOT_ROMSIZE_KB_1024 == 1 +#if CONFIG_COREBOOT_ROMSIZE_KB_1024 #define BIOS_SIZE BIOS_SIZE_1M #elif CONFIG_COREBOOT_ROMSIZE_KB_2048 == 1 #define BIOS_SIZE BIOS_SIZE_2M diff --git a/src/mainboard/advansus/a785e-i/romstage.c b/src/mainboard/advansus/a785e-i/romstage.c index 3a33b5fc9c..dcc3ba5180 100644 --- a/src/mainboard/advansus/a785e-i/romstage.c +++ b/src/mainboard/advansus/a785e-i/romstage.c @@ -160,7 +160,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(); @@ -173,7 +173,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* run _early_setup before soft-reset. */ rs780_early_setup(); -#if CONFIG_SET_FIDVID == 1 +#if CONFIG_SET_FIDVID msr = rdmsr(0xc0010071); printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); post_code(0x39); diff --git a/src/mainboard/amd/bimini_fam10/get_bus_conf.c b/src/mainboard/amd/bimini_fam10/get_bus_conf.c index e53aef5109..41a2fe7676 100644 --- a/src/mainboard/amd/bimini_fam10/get_bus_conf.c +++ b/src/mainboard/amd/bimini_fam10/get_bus_conf.c @@ -23,7 +23,7 @@ #include <string.h> #include <stdint.h> #include <stdlib.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif #include <cpu/amd/amdfam10_sysconf.h> @@ -138,7 +138,7 @@ void get_bus_conf(void) /* I/O APICs: APIC ID Version State Address */ bus_isa = 10; -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/amd/bimini_fam10/mainboard.c b/src/mainboard/amd/bimini_fam10/mainboard.c index 1fd0eebf0f..241d9057c0 100644 --- a/src/mainboard/amd/bimini_fam10/mainboard.c +++ b/src/mainboard/amd/bimini_fam10/mainboard.c @@ -134,7 +134,7 @@ static void bimini_enable(device_t dev) printk(BIOS_INFO, "Mainboard BIMINI Enable. dev=0x%p\n", dev); -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA msr_t msr, msr2; /* TOP_MEM: the top of DRAM below 4G */ @@ -184,7 +184,7 @@ int add_mainboard_resources(struct lb_memory *mem) /* UMA is removed from system memory in the northbridge code, but * in some circumstances we want the memory mentioned as reserved. */ -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, diff --git a/src/mainboard/amd/bimini_fam10/mptable.c b/src/mainboard/amd/bimini_fam10/mptable.c index ae81411e2e..ec60b35a1d 100644 --- a/src/mainboard/amd/bimini_fam10/mptable.c +++ b/src/mainboard/amd/bimini_fam10/mptable.c @@ -83,7 +83,7 @@ static void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_GENERATE_ACPI_TABLES == 0 +#if !CONFIG_GENERATE_ACPI_TABLES #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb800, (pin)) #else diff --git a/src/mainboard/amd/bimini_fam10/romstage.c b/src/mainboard/amd/bimini_fam10/romstage.c index 732e03322e..5980ca2a2e 100644 --- a/src/mainboard/amd/bimini_fam10/romstage.c +++ b/src/mainboard/amd/bimini_fam10/romstage.c @@ -151,7 +151,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(); diff --git a/src/mainboard/amd/dbm690t/get_bus_conf.c b/src/mainboard/amd/dbm690t/get_bus_conf.c index 2b0fca7abf..d4152a1314 100644 --- a/src/mainboard/amd/dbm690t/get_bus_conf.c +++ b/src/mainboard/amd/dbm690t/get_bus_conf.c @@ -23,7 +23,7 @@ #include <string.h> #include <stdint.h> #include <stdlib.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -107,7 +107,7 @@ void get_bus_conf(void) } /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/amd/dbm690t/mainboard.c b/src/mainboard/amd/dbm690t/mainboard.c index 2f54bfdc68..8841291c92 100644 --- a/src/mainboard/amd/dbm690t/mainboard.c +++ b/src/mainboard/amd/dbm690t/mainboard.c @@ -187,7 +187,7 @@ static void dbm690t_enable(device_t dev) { printk(BIOS_INFO, "Mainboard DBM690T Enable. dev=0x%p\n", dev); -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA msr_t msr, msr2; /* TOP_MEM: the top of DRAM below 4G */ @@ -238,7 +238,7 @@ int add_mainboard_resources(struct lb_memory *mem) /* UMA is removed from system memory in the northbridge code, but * in some circumstances we want the memory mentioned as reserved. */ -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA printk(BIOS_INFO, "uma_memory_base=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, diff --git a/src/mainboard/amd/dbm690t/mptable.c b/src/mainboard/amd/dbm690t/mptable.c index cf98ae30d9..f34918f363 100644 --- a/src/mainboard/amd/dbm690t/mptable.c +++ b/src/mainboard/amd/dbm690t/mptable.c @@ -100,7 +100,7 @@ static void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_GENERATE_ACPI_TABLES == 0 +#if !CONFIG_GENERATE_ACPI_TABLES #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb600, (pin)) #else diff --git a/src/mainboard/amd/dbm690t/romstage.c b/src/mainboard/amd/dbm690t/romstage.c index 66637a8b72..459aa47e90 100644 --- a/src/mainboard/amd/dbm690t/romstage.c +++ b/src/mainboard/amd/dbm690t/romstage.c @@ -102,7 +102,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS /* It is said that we should start core1 after all core0 launched */ wait_all_core0_started(); start_other_cores(); diff --git a/src/mainboard/amd/dinar/mainboard.c b/src/mainboard/amd/dinar/mainboard.c index 9d10390e83..360e1df447 100644 --- a/src/mainboard/amd/dinar/mainboard.c +++ b/src/mainboard/amd/dinar/mainboard.c @@ -75,7 +75,7 @@ uint64_t uma_memory_base, uma_memory_size; static void dinar_enable(device_t dev) { printk(BIOS_INFO, "Mainboard Dinar Enable. dev=0x%p\n", dev); -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA msr_t msr, msr2; uint32_t sys_mem; @@ -124,7 +124,7 @@ int add_mainboard_resources(struct lb_memory *mem) /* UMA is removed from system memory in the northbridge code, but * in some circumstances we want the memory mentioned as reserved. */ -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, diff --git a/src/mainboard/amd/dinar/rd890_cfg.h b/src/mainboard/amd/dinar/rd890_cfg.h index a4f4e1a655..aaab1f3b5f 100644 --- a/src/mainboard/amd/dinar/rd890_cfg.h +++ b/src/mainboard/amd/dinar/rd890_cfg.h @@ -32,10 +32,10 @@ * [12..15] - Sublink (1..2), If NB connected to full link than Sublink should be set to 0. */ #ifndef DEFAULT_HT_PATH -#if CONFIG_CPU_AMD_AGESA_FAMILY10 == 1 +#if CONFIG_CPU_AMD_AGESA_FAMILY10 #define DEFAULT_HT_PATH {0x0, 0x3} #endif -#if CONFIG_CPU_AMD_AGESA_FAMILY15 == 1 +#if CONFIG_CPU_AMD_AGESA_FAMILY15 #define DEFAULT_HT_PATH {0x0, 0x1} #endif #endif diff --git a/src/mainboard/amd/dinar/sb700_cfg.h b/src/mainboard/amd/dinar/sb700_cfg.h index b405f0e78e..038e7e7d8d 100644 --- a/src/mainboard/amd/dinar/sb700_cfg.h +++ b/src/mainboard/amd/dinar/sb700_cfg.h @@ -40,7 +40,7 @@ * before AGESA module get call. */ #ifndef BIOS_SIZE -#if CONFIG_COREBOOT_ROMSIZE_KB_1024 == 1 +#if CONFIG_COREBOOT_ROMSIZE_KB_1024 #define BIOS_SIZE BIOS_SIZE_1M #elif CONFIG_COREBOOT_ROMSIZE_KB_2048 == 1 #define BIOS_SIZE BIOS_SIZE_2M diff --git a/src/mainboard/amd/inagua/mainboard.c b/src/mainboard/amd/inagua/mainboard.c index 17c985de0d..d35b1757f9 100644 --- a/src/mainboard/amd/inagua/mainboard.c +++ b/src/mainboard/amd/inagua/mainboard.c @@ -80,7 +80,7 @@ static void inagua_enable(device_t dev) { printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA msr_t msr, msr2; uint32_t sys_mem; @@ -128,7 +128,7 @@ int add_mainboard_resources(struct lb_memory *mem) /* UMA is removed from system memory in the northbridge code, but * in some circumstances we want the memory mentioned as reserved. */ -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, diff --git a/src/mainboard/amd/inagua/mptable.c b/src/mainboard/amd/inagua/mptable.c index b5a507f248..393eb9e03b 100644 --- a/src/mainboard/amd/inagua/mptable.c +++ b/src/mainboard/amd/inagua/mptable.c @@ -87,7 +87,7 @@ static void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_GENERATE_ACPI_TABLES == 0 +#if !CONFIG_GENERATE_ACPI_TABLES #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb800, (pin)) #else diff --git a/src/mainboard/amd/inagua/platform_cfg.h b/src/mainboard/amd/inagua/platform_cfg.h index 2a3342c553..dd0251ffc2 100644 --- a/src/mainboard/amd/inagua/platform_cfg.h +++ b/src/mainboard/amd/inagua/platform_cfg.h @@ -37,7 +37,7 @@ * before AGESA module get call. */ #ifndef BIOS_SIZE -#if CONFIG_COREBOOT_ROMSIZE_KB_1024 == 1 +#if CONFIG_COREBOOT_ROMSIZE_KB_1024 #define BIOS_SIZE BIOS_SIZE_1M #elif CONFIG_COREBOOT_ROMSIZE_KB_2048 == 1 #define BIOS_SIZE BIOS_SIZE_2M diff --git a/src/mainboard/amd/mahogany/get_bus_conf.c b/src/mainboard/amd/mahogany/get_bus_conf.c index bed760618e..149e163574 100644 --- a/src/mainboard/amd/mahogany/get_bus_conf.c +++ b/src/mainboard/amd/mahogany/get_bus_conf.c @@ -23,7 +23,7 @@ #include <string.h> #include <stdint.h> #include <stdlib.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -107,7 +107,7 @@ void get_bus_conf(void) } /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/amd/mahogany/mainboard.c b/src/mainboard/amd/mahogany/mainboard.c index 0ccef102f3..989070cb03 100644 --- a/src/mainboard/amd/mahogany/mainboard.c +++ b/src/mainboard/amd/mahogany/mainboard.c @@ -105,7 +105,7 @@ static void mahogany_enable(device_t dev) { printk(BIOS_INFO, "Mainboard MAHOGANY Enable. dev=0x%p\n", dev); -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA msr_t msr, msr2; /* TOP_MEM: the top of DRAM below 4G */ @@ -154,7 +154,7 @@ int add_mainboard_resources(struct lb_memory *mem) /* UMA is removed from system memory in the northbridge code, but * in some circumstances we want the memory mentioned as reserved. */ -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, diff --git a/src/mainboard/amd/mahogany/mptable.c b/src/mainboard/amd/mahogany/mptable.c index dabd2ed574..376e043530 100644 --- a/src/mainboard/amd/mahogany/mptable.c +++ b/src/mainboard/amd/mahogany/mptable.c @@ -101,7 +101,7 @@ static void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_GENERATE_ACPI_TABLES == 0 +#if !CONFIG_GENERATE_ACPI_TABLES #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb700, (pin)) #else diff --git a/src/mainboard/amd/mahogany/romstage.c b/src/mainboard/amd/mahogany/romstage.c index 104652a76f..9d913e977a 100644 --- a/src/mainboard/amd/mahogany/romstage.c +++ b/src/mainboard/amd/mahogany/romstage.c @@ -102,7 +102,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS /* It is said that we should start core1 after all core0 launched */ wait_all_core0_started(); start_other_cores(); diff --git a/src/mainboard/amd/mahogany_fam10/get_bus_conf.c b/src/mainboard/amd/mahogany_fam10/get_bus_conf.c index b169775456..563a87efd5 100644 --- a/src/mainboard/amd/mahogany_fam10/get_bus_conf.c +++ b/src/mainboard/amd/mahogany_fam10/get_bus_conf.c @@ -23,7 +23,7 @@ #include <string.h> #include <stdint.h> #include <stdlib.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -107,7 +107,7 @@ void get_bus_conf(void) } /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/amd/mahogany_fam10/mainboard.c b/src/mainboard/amd/mahogany_fam10/mainboard.c index 2cbeaf127b..1f1941b02d 100644 --- a/src/mainboard/amd/mahogany_fam10/mainboard.c +++ b/src/mainboard/amd/mahogany_fam10/mainboard.c @@ -106,7 +106,7 @@ static void mahogany_enable(device_t dev) { printk(BIOS_INFO, "Mainboard MAHOGANY Enable. dev=0x%p\n", dev); -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA msr_t msr, msr2; /* TOP_MEM: the top of DRAM below 4G */ @@ -155,7 +155,7 @@ int add_mainboard_resources(struct lb_memory *mem) /* UMA is removed from system memory in the northbridge code, but * in some circumstances we want the memory mentioned as reserved. */ -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, diff --git a/src/mainboard/amd/mahogany_fam10/mptable.c b/src/mainboard/amd/mahogany_fam10/mptable.c index c56952e934..d69c7b78a6 100644 --- a/src/mainboard/amd/mahogany_fam10/mptable.c +++ b/src/mainboard/amd/mahogany_fam10/mptable.c @@ -100,7 +100,7 @@ static void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_GENERATE_ACPI_TABLES == 0 +#if !CONFIG_GENERATE_ACPI_TABLES #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb700, (pin)) #else diff --git a/src/mainboard/amd/mahogany_fam10/romstage.c b/src/mainboard/amd/mahogany_fam10/romstage.c index dce9baabd3..d48b69d24a 100644 --- a/src/mainboard/amd/mahogany_fam10/romstage.c +++ b/src/mainboard/amd/mahogany_fam10/romstage.c @@ -147,7 +147,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ wait_all_core0_started(); - #if CONFIG_LOGICAL_CPUS==1 + #if CONFIG_LOGICAL_CPUS /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(); diff --git a/src/mainboard/amd/persimmon/agesawrapper.c b/src/mainboard/amd/persimmon/agesawrapper.c index e60673ec9b..0d63abb02b 100644 --- a/src/mainboard/amd/persimmon/agesawrapper.c +++ b/src/mainboard/amd/persimmon/agesawrapper.c @@ -515,7 +515,7 @@ agesawrapper_amdinitlate ( return (UINT32)Status; } -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME UINT32 agesawrapper_amdinitresume ( VOID diff --git a/src/mainboard/amd/persimmon/get_bus_conf.c b/src/mainboard/amd/persimmon/get_bus_conf.c index 4c094aecae..1d5842acfd 100644 --- a/src/mainboard/amd/persimmon/get_bus_conf.c +++ b/src/mainboard/amd/persimmon/get_bus_conf.c @@ -51,7 +51,7 @@ u32 sbdn_sb800; static u32 get_bus_conf_done = 0; -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME extern u8 acpi_slp_type; #endif @@ -83,7 +83,7 @@ void get_bus_conf(void) * of each of the write functions called prior to the ACPI write functions, so this * becomes the best place for this call. */ -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME if (acpi_slp_type != 3) { status = agesawrapper_amdinitlate(); if(status) diff --git a/src/mainboard/amd/persimmon/mainboard.c b/src/mainboard/amd/persimmon/mainboard.c index 9a8428e25b..76a9ae6ae4 100644 --- a/src/mainboard/amd/persimmon/mainboard.c +++ b/src/mainboard/amd/persimmon/mainboard.c @@ -63,11 +63,11 @@ static void persimmon_enable(device_t dev) * The mainboard is the first place that we get control in ramstage. Check * for S3 resume and call the approriate AGESA/CIMx resume functions. */ -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME acpi_slp_type = acpi_get_sleep_type(); #endif -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA msr_t msr, msr2; uint32_t sys_mem; @@ -113,7 +113,7 @@ int add_mainboard_resources(struct lb_memory *mem) /* UMA is removed from system memory in the northbridge code, but * in some circumstances we want the memory mentioned as reserved. */ -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, diff --git a/src/mainboard/amd/persimmon/mptable.c b/src/mainboard/amd/persimmon/mptable.c index 61ddef184e..d0c31f00d9 100644 --- a/src/mainboard/amd/persimmon/mptable.c +++ b/src/mainboard/amd/persimmon/mptable.c @@ -83,7 +83,7 @@ static void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_GENERATE_ACPI_TABLES == 0 +#if !CONFIG_GENERATE_ACPI_TABLES #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb800, (pin)) #else diff --git a/src/mainboard/amd/persimmon/platform_cfg.h b/src/mainboard/amd/persimmon/platform_cfg.h index 97aa47e2e2..db3fc158a1 100644 --- a/src/mainboard/amd/persimmon/platform_cfg.h +++ b/src/mainboard/amd/persimmon/platform_cfg.h @@ -37,7 +37,7 @@ * before AGESA module get call. */ #ifndef BIOS_SIZE -#if CONFIG_COREBOOT_ROMSIZE_KB_1024 == 1 +#if CONFIG_COREBOOT_ROMSIZE_KB_1024 #define BIOS_SIZE BIOS_SIZE_1M #elif CONFIG_COREBOOT_ROMSIZE_KB_2048 == 1 #define BIOS_SIZE BIOS_SIZE_2M diff --git a/src/mainboard/amd/persimmon/romstage.c b/src/mainboard/amd/persimmon/romstage.c index 55d05168f6..56a67886c8 100644 --- a/src/mainboard/amd/persimmon/romstage.c +++ b/src/mainboard/amd/persimmon/romstage.c @@ -51,7 +51,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { u32 val; -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME void *resume_backup_memory; #endif @@ -107,7 +107,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) else printk(BIOS_DEBUG, "passed.\n"); -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME if (!acpi_is_wakeup_early()) { /* Check for S3 resume */ #endif post_code(0x40); @@ -126,7 +126,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) else printk(BIOS_DEBUG, "passed.\n"); -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME } else { /* S3 detect */ printk(BIOS_INFO, "S3 detected\n"); diff --git a/src/mainboard/amd/pistachio/get_bus_conf.c b/src/mainboard/amd/pistachio/get_bus_conf.c index 2b0fca7abf..d4152a1314 100644 --- a/src/mainboard/amd/pistachio/get_bus_conf.c +++ b/src/mainboard/amd/pistachio/get_bus_conf.c @@ -23,7 +23,7 @@ #include <string.h> #include <stdint.h> #include <stdlib.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -107,7 +107,7 @@ void get_bus_conf(void) } /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/amd/pistachio/mainboard.c b/src/mainboard/amd/pistachio/mainboard.c index d1d9a849fc..e5d0efa807 100644 --- a/src/mainboard/amd/pistachio/mainboard.c +++ b/src/mainboard/amd/pistachio/mainboard.c @@ -257,7 +257,7 @@ static void pistachio_enable(device_t dev) { printk(BIOS_INFO, "Mainboard Pistachio Enable. dev=0x%p\n", dev); -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA msr_t msr, msr2; /* TOP_MEM: the top of DRAM below 4G */ @@ -308,7 +308,7 @@ int add_mainboard_resources(struct lb_memory *mem) /* UMA is removed from system memory in the northbridge code, but * in some circumstances we want the memory mentioned as reserved. */ -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA printk(BIOS_INFO, "uma_memory_base=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, diff --git a/src/mainboard/amd/pistachio/mptable.c b/src/mainboard/amd/pistachio/mptable.c index cf98ae30d9..f34918f363 100644 --- a/src/mainboard/amd/pistachio/mptable.c +++ b/src/mainboard/amd/pistachio/mptable.c @@ -100,7 +100,7 @@ static void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_GENERATE_ACPI_TABLES == 0 +#if !CONFIG_GENERATE_ACPI_TABLES #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb600, (pin)) #else diff --git a/src/mainboard/amd/pistachio/romstage.c b/src/mainboard/amd/pistachio/romstage.c index 5d6e7a848b..45c94c8aba 100644 --- a/src/mainboard/amd/pistachio/romstage.c +++ b/src/mainboard/amd/pistachio/romstage.c @@ -101,7 +101,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS /* It is said that we should start core1 after all core0 launched */ wait_all_core0_started(); start_other_cores(); diff --git a/src/mainboard/amd/serengeti_cheetah/get_bus_conf.c b/src/mainboard/amd/serengeti_cheetah/get_bus_conf.c index 36b5776c5e..d4f44c0d93 100644 --- a/src/mainboard/amd/serengeti_cheetah/get_bus_conf.c +++ b/src/mainboard/amd/serengeti_cheetah/get_bus_conf.c @@ -3,7 +3,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -192,7 +192,7 @@ void get_bus_conf(void) /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(3); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/amd/serengeti_cheetah/mptable.c b/src/mainboard/amd/serengeti_cheetah/mptable.c index 4214408b86..866875dc63 100644 --- a/src/mainboard/amd/serengeti_cheetah/mptable.c +++ b/src/mainboard/amd/serengeti_cheetah/mptable.c @@ -4,7 +4,7 @@ #include <device/pci.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif #include <cpu/amd/amdk8_sysconf.h> diff --git a/src/mainboard/amd/serengeti_cheetah/romstage.c b/src/mainboard/amd/serengeti_cheetah/romstage.c index 8378ca4abe..2524e522a2 100644 --- a/src/mainboard/amd/serengeti_cheetah/romstage.c +++ b/src/mainboard/amd/serengeti_cheetah/romstage.c @@ -1,4 +1,4 @@ -#if CONFIG_K8_REV_F_SUPPORT == 1 +#if CONFIG_K8_REV_F_SUPPORT #define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 #endif @@ -145,7 +145,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_coherent_ht_domain(); // routing table and start other core0 wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, * So here need to make sure last core0 is started, esp for two way system, diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/get_bus_conf.c b/src/mainboard/amd/serengeti_cheetah_fam10/get_bus_conf.c index b595473304..da7efe6e8d 100644 --- a/src/mainboard/amd/serengeti_cheetah_fam10/get_bus_conf.c +++ b/src/mainboard/amd/serengeti_cheetah_fam10/get_bus_conf.c @@ -22,7 +22,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/mptable.c b/src/mainboard/amd/serengeti_cheetah_fam10/mptable.c index e90b348acb..d19b3c66f6 100644 --- a/src/mainboard/amd/serengeti_cheetah_fam10/mptable.c +++ b/src/mainboard/amd/serengeti_cheetah_fam10/mptable.c @@ -23,7 +23,7 @@ #include <device/pci.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif #include <cpu/amd/amdfam10_sysconf.h> diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/romstage.c b/src/mainboard/amd/serengeti_cheetah_fam10/romstage.c index 29b00b27d4..09447a63c1 100644 --- a/src/mainboard/amd/serengeti_cheetah_fam10/romstage.c +++ b/src/mainboard/amd/serengeti_cheetah_fam10/romstage.c @@ -255,7 +255,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ wait_all_core0_started(); - #if CONFIG_LOGICAL_CPUS==1 + #if CONFIG_LOGICAL_CPUS /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(); diff --git a/src/mainboard/amd/south_station/mainboard.c b/src/mainboard/amd/south_station/mainboard.c index 990c8b9674..ed65b34622 100644 --- a/src/mainboard/amd/south_station/mainboard.c +++ b/src/mainboard/amd/south_station/mainboard.c @@ -82,7 +82,7 @@ static void southstation_enable(device_t dev) { printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA msr_t msr, msr2; uint32_t sys_mem; @@ -129,7 +129,7 @@ int add_mainboard_resources(struct lb_memory *mem) /* UMA is removed from system memory in the northbridge code, but * in some circumstances we want the memory mentioned as reserved. */ -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, diff --git a/src/mainboard/amd/south_station/mptable.c b/src/mainboard/amd/south_station/mptable.c index 99004b3f2e..ba73ce0e51 100644 --- a/src/mainboard/amd/south_station/mptable.c +++ b/src/mainboard/amd/south_station/mptable.c @@ -83,7 +83,7 @@ static void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_GENERATE_ACPI_TABLES == 0 +#if !CONFIG_GENERATE_ACPI_TABLES #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb800, (pin)) #else diff --git a/src/mainboard/amd/south_station/platform_cfg.h b/src/mainboard/amd/south_station/platform_cfg.h index 66aab8bf4b..1c8506b029 100644 --- a/src/mainboard/amd/south_station/platform_cfg.h +++ b/src/mainboard/amd/south_station/platform_cfg.h @@ -37,7 +37,7 @@ * before AGESA module get call. */ #ifndef BIOS_SIZE -#if CONFIG_COREBOOT_ROMSIZE_KB_1024 == 1 +#if CONFIG_COREBOOT_ROMSIZE_KB_1024 #define BIOS_SIZE BIOS_SIZE_1M #elif CONFIG_COREBOOT_ROMSIZE_KB_2048 == 1 #define BIOS_SIZE BIOS_SIZE_2M diff --git a/src/mainboard/amd/tilapia_fam10/get_bus_conf.c b/src/mainboard/amd/tilapia_fam10/get_bus_conf.c index b169775456..563a87efd5 100644 --- a/src/mainboard/amd/tilapia_fam10/get_bus_conf.c +++ b/src/mainboard/amd/tilapia_fam10/get_bus_conf.c @@ -23,7 +23,7 @@ #include <string.h> #include <stdint.h> #include <stdlib.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -107,7 +107,7 @@ void get_bus_conf(void) } /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/amd/tilapia_fam10/mainboard.c b/src/mainboard/amd/tilapia_fam10/mainboard.c index 357bdac230..e2ef3f96bb 100644 --- a/src/mainboard/amd/tilapia_fam10/mainboard.c +++ b/src/mainboard/amd/tilapia_fam10/mainboard.c @@ -281,7 +281,7 @@ static void tilapia_enable(device_t dev) { printk(BIOS_INFO, "Mainboard TILAPIA Enable. dev=0x%p\n", dev); -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA msr_t msr, msr2; /* TOP_MEM: the top of DRAM below 4G */ @@ -331,7 +331,7 @@ int add_mainboard_resources(struct lb_memory *mem) /* UMA is removed from system memory in the northbridge code, but * in some circumstances we want the memory mentioned as reserved. */ -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, diff --git a/src/mainboard/amd/tilapia_fam10/mptable.c b/src/mainboard/amd/tilapia_fam10/mptable.c index 4a276fb0c3..d7951cf8be 100644 --- a/src/mainboard/amd/tilapia_fam10/mptable.c +++ b/src/mainboard/amd/tilapia_fam10/mptable.c @@ -100,7 +100,7 @@ static void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_GENERATE_ACPI_TABLES == 0 +#if !CONFIG_GENERATE_ACPI_TABLES #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb700, (pin)) #else diff --git a/src/mainboard/amd/tilapia_fam10/romstage.c b/src/mainboard/amd/tilapia_fam10/romstage.c index f316395e27..9919cce880 100644 --- a/src/mainboard/amd/tilapia_fam10/romstage.c +++ b/src/mainboard/amd/tilapia_fam10/romstage.c @@ -147,7 +147,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(); diff --git a/src/mainboard/amd/torpedo/Oem.h b/src/mainboard/amd/torpedo/Oem.h index 037ce94ef8..4acc136605 100644 --- a/src/mainboard/amd/torpedo/Oem.h +++ b/src/mainboard/amd/torpedo/Oem.h @@ -20,7 +20,7 @@ #define BIOS_SIZE 0x04 //04 - 1MB #endif #define LEGACY_FREE 0x00 -#if CONFIG_ONBOARD_USB30 == 0 +#if !CONFIG_ONBOARD_USB30 #define XHCI_SUPPORT 0x01 #endif diff --git a/src/mainboard/amd/torpedo/mainboard.c b/src/mainboard/amd/torpedo/mainboard.c index 2152153936..7248bfb27f 100644 --- a/src/mainboard/amd/torpedo/mainboard.c +++ b/src/mainboard/amd/torpedo/mainboard.c @@ -58,7 +58,7 @@ uint64_t uma_memory_base, uma_memory_size; static void torpedo_enable(device_t dev) { printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable. dev=0x%p\n", dev); -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA msr_t msr, msr2; uint32_t sys_mem; @@ -107,7 +107,7 @@ int add_mainboard_resources(struct lb_memory *mem) /* UMA is removed from system memory in the northbridge code, but * in some circumstances we want the memory mentioned as reserved. */ -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, diff --git a/src/mainboard/amd/torpedo/mptable.c b/src/mainboard/amd/torpedo/mptable.c index 936a41717c..95137415b1 100644 --- a/src/mainboard/amd/torpedo/mptable.c +++ b/src/mainboard/amd/torpedo/mptable.c @@ -164,7 +164,7 @@ static void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_GENERATE_ACPI_TABLES == 0 +#if !CONFIG_GENERATE_ACPI_TABLES #define PCI_INT(bus, dev, int_sign, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), apicid_sb900, (pin)) #else diff --git a/src/mainboard/amd/torpedo/platform_cfg.h b/src/mainboard/amd/torpedo/platform_cfg.h index cf31c6affd..a6d02e8b78 100644 --- a/src/mainboard/amd/torpedo/platform_cfg.h +++ b/src/mainboard/amd/torpedo/platform_cfg.h @@ -39,7 +39,7 @@ #define BIOS_SIZE_4M 3 #define BIOS_SIZE_8M 7 -#if CONFIG_COREBOOT_ROMSIZE_KB_1024 == 1 +#if CONFIG_COREBOOT_ROMSIZE_KB_1024 #define BIOS_SIZE BIOS_SIZE_1M #elif CONFIG_COREBOOT_ROMSIZE_KB_2048 == 1 #define BIOS_SIZE BIOS_SIZE_2M @@ -311,7 +311,7 @@ #define INCHIP_USB_CINFIG 0x7F #define INCHIP_USB_OHCI1_CINFIG 0x01 #define INCHIP_USB_OHCI2_CINFIG 0x01 -#if CONFIG_ONBOARD_USB30 == 1 +#if CONFIG_ONBOARD_USB30 #define INCHIP_USB_OHCI3_CINFIG 0x00 #else #define INCHIP_USB_OHCI3_CINFIG 0x01 @@ -985,7 +985,7 @@ * @li <b>0</b> - Disable * @li <b>1</b> - Enable */ -#if CONFIG_ONBOARD_USB30 == 1 +#if CONFIG_ONBOARD_USB30 #define SB_XHCI_SWITCH 0 #else #define SB_XHCI_SWITCH 1 diff --git a/src/mainboard/amd/union_station/mainboard.c b/src/mainboard/amd/union_station/mainboard.c index 800d64d58c..c5b481d5f0 100644 --- a/src/mainboard/amd/union_station/mainboard.c +++ b/src/mainboard/amd/union_station/mainboard.c @@ -56,7 +56,7 @@ static void unionstation_enable(device_t dev) { printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA msr_t msr, msr2; uint32_t sys_mem; @@ -103,7 +103,7 @@ int add_mainboard_resources(struct lb_memory *mem) /* UMA is removed from system memory in the northbridge code, but * in some circumstances we want the memory mentioned as reserved. */ -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, diff --git a/src/mainboard/amd/union_station/mptable.c b/src/mainboard/amd/union_station/mptable.c index 99004b3f2e..ba73ce0e51 100644 --- a/src/mainboard/amd/union_station/mptable.c +++ b/src/mainboard/amd/union_station/mptable.c @@ -83,7 +83,7 @@ static void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_GENERATE_ACPI_TABLES == 0 +#if !CONFIG_GENERATE_ACPI_TABLES #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb800, (pin)) #else diff --git a/src/mainboard/amd/union_station/platform_cfg.h b/src/mainboard/amd/union_station/platform_cfg.h index 66aab8bf4b..1c8506b029 100644 --- a/src/mainboard/amd/union_station/platform_cfg.h +++ b/src/mainboard/amd/union_station/platform_cfg.h @@ -37,7 +37,7 @@ * before AGESA module get call. */ #ifndef BIOS_SIZE -#if CONFIG_COREBOOT_ROMSIZE_KB_1024 == 1 +#if CONFIG_COREBOOT_ROMSIZE_KB_1024 #define BIOS_SIZE BIOS_SIZE_1M #elif CONFIG_COREBOOT_ROMSIZE_KB_2048 == 1 #define BIOS_SIZE BIOS_SIZE_2M diff --git a/src/mainboard/arima/hdama/romstage.c b/src/mainboard/arima/hdama/romstage.c index c334fa5b57..cd0838958e 100644 --- a/src/mainboard/arima/hdama/romstage.c +++ b/src/mainboard/arima/hdama/romstage.c @@ -93,7 +93,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) needs_reset = setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched start_other_cores(); wait_all_other_cores_started(bsp_apicid); diff --git a/src/mainboard/asrock/939a785gmh/get_bus_conf.c b/src/mainboard/asrock/939a785gmh/get_bus_conf.c index bed760618e..149e163574 100644 --- a/src/mainboard/asrock/939a785gmh/get_bus_conf.c +++ b/src/mainboard/asrock/939a785gmh/get_bus_conf.c @@ -23,7 +23,7 @@ #include <string.h> #include <stdint.h> #include <stdlib.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -107,7 +107,7 @@ void get_bus_conf(void) } /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/asrock/939a785gmh/mainboard.c b/src/mainboard/asrock/939a785gmh/mainboard.c index 945a19f040..0b566e445f 100644 --- a/src/mainboard/asrock/939a785gmh/mainboard.c +++ b/src/mainboard/asrock/939a785gmh/mainboard.c @@ -103,7 +103,7 @@ static void mb_enable(device_t dev) { printk(BIOS_INFO, "Mainboard 939A785GMH/128M Enable. dev=0x%p\n", dev); -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA msr_t msr, msr2; /* TOP_MEM: the top of DRAM below 4G */ @@ -152,7 +152,7 @@ int add_mainboard_resources(struct lb_memory *mem) /* UMA is removed from system memory in the northbridge code, but * in some circumstances we want the memory mentioned as reserved. */ -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, diff --git a/src/mainboard/asrock/939a785gmh/mptable.c b/src/mainboard/asrock/939a785gmh/mptable.c index c0ca5503c4..5b73b2014b 100644 --- a/src/mainboard/asrock/939a785gmh/mptable.c +++ b/src/mainboard/asrock/939a785gmh/mptable.c @@ -99,7 +99,7 @@ static void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_GENERATE_ACPI_TABLES == 0 +#if !CONFIG_GENERATE_ACPI_TABLES #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb700, (pin)) #else diff --git a/src/mainboard/asrock/939a785gmh/romstage.c b/src/mainboard/asrock/939a785gmh/romstage.c index 4a1b1c30ab..51b751929e 100644 --- a/src/mainboard/asrock/939a785gmh/romstage.c +++ b/src/mainboard/asrock/939a785gmh/romstage.c @@ -169,7 +169,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS /* It is said that we should start core1 after all core0 launched */ wait_all_core0_started(); start_other_cores(); diff --git a/src/mainboard/asrock/e350m1/mainboard.c b/src/mainboard/asrock/e350m1/mainboard.c index 4e5832426e..8642e28266 100644 --- a/src/mainboard/asrock/e350m1/mainboard.c +++ b/src/mainboard/asrock/e350m1/mainboard.c @@ -54,7 +54,7 @@ uint64_t uma_memory_base, uma_memory_size; static void e350m1_enable(device_t dev) { printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA msr_t msr, msr2; uint32_t sys_mem; @@ -101,7 +101,7 @@ int add_mainboard_resources(struct lb_memory *mem) /* UMA is removed from system memory in the northbridge code, but * in some circumstances we want the memory mentioned as reserved. */ -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, diff --git a/src/mainboard/asrock/e350m1/mptable.c b/src/mainboard/asrock/e350m1/mptable.c index 7e8c947b57..81fe0bd985 100644 --- a/src/mainboard/asrock/e350m1/mptable.c +++ b/src/mainboard/asrock/e350m1/mptable.c @@ -83,7 +83,7 @@ static void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_GENERATE_ACPI_TABLES == 0 +#if !CONFIG_GENERATE_ACPI_TABLES #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb800, (pin)) #else diff --git a/src/mainboard/asrock/e350m1/platform_cfg.h b/src/mainboard/asrock/e350m1/platform_cfg.h index 6aa31d2cdb..7fa9c23f07 100644 --- a/src/mainboard/asrock/e350m1/platform_cfg.h +++ b/src/mainboard/asrock/e350m1/platform_cfg.h @@ -37,7 +37,7 @@ * before AGESA module get call. */ #ifndef BIOS_SIZE - #if CONFIG_COREBOOT_ROMSIZE_KB_1024 == 1 + #if CONFIG_COREBOOT_ROMSIZE_KB_1024 #define BIOS_SIZE BIOS_SIZE_1M #elif CONFIG_COREBOOT_ROMSIZE_KB_2048 == 1 #define BIOS_SIZE BIOS_SIZE_2M diff --git a/src/mainboard/asus/a8n_e/get_bus_conf.c b/src/mainboard/asus/a8n_e/get_bus_conf.c index 75741fddc5..ce1448d381 100644 --- a/src/mainboard/asus/a8n_e/get_bus_conf.c +++ b/src/mainboard/asus/a8n_e/get_bus_conf.c @@ -27,7 +27,7 @@ #include <string.h> #include <stdint.h> #include <stdlib.h> -#if CONFIG_LOGICAL_CPUS == 1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif #include <cpu/amd/amdk8_sysconf.h> @@ -114,7 +114,7 @@ void get_bus_conf(void) } } -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(3); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/asus/a8n_e/romstage.c b/src/mainboard/asus/a8n_e/romstage.c index b3e85b7d83..fcbe86d0a6 100644 --- a/src/mainboard/asus/a8n_e/romstage.c +++ b/src/mainboard/asus/a8n_e/romstage.c @@ -121,7 +121,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) needs_reset = setup_coherent_ht_domain(); wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS /* It is said that we should start core1 after all core0 launched. */ start_other_cores(); wait_all_other_cores_started(bsp_apicid); diff --git a/src/mainboard/asus/a8v-e_deluxe/romstage.c b/src/mainboard/asus/a8v-e_deluxe/romstage.c index 47a0e656f1..53a1fbc6b8 100644 --- a/src/mainboard/asus/a8v-e_deluxe/romstage.c +++ b/src/mainboard/asus/a8v-e_deluxe/romstage.c @@ -190,7 +190,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) print_info("now booting... Core0 started\n"); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS /* It is said that we should start core1 after all core0 launched. */ start_other_cores(); wait_all_other_cores_started(bsp_apicid); diff --git a/src/mainboard/asus/a8v-e_se/romstage.c b/src/mainboard/asus/a8v-e_se/romstage.c index 41934523c0..7539a80e17 100644 --- a/src/mainboard/asus/a8v-e_se/romstage.c +++ b/src/mainboard/asus/a8v-e_se/romstage.c @@ -192,7 +192,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) print_info("now booting... Core0 started\n"); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS /* It is said that we should start core1 after all core0 launched. */ start_other_cores(); wait_all_other_cores_started(bsp_apicid); diff --git a/src/mainboard/asus/k8v-x/romstage.c b/src/mainboard/asus/k8v-x/romstage.c index f24c4d40c8..82b0636b01 100644 --- a/src/mainboard/asus/k8v-x/romstage.c +++ b/src/mainboard/asus/k8v-x/romstage.c @@ -163,7 +163,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) print_info("now booting... Core0 started\n"); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS /* It is said that we should start core1 after all core0 launched. */ start_other_cores(); wait_all_other_cores_started(bsp_apicid); diff --git a/src/mainboard/asus/m2n-e/get_bus_conf.c b/src/mainboard/asus/m2n-e/get_bus_conf.c index a39ac22d7e..031b67388a 100644 --- a/src/mainboard/asus/m2n-e/get_bus_conf.c +++ b/src/mainboard/asus/m2n-e/get_bus_conf.c @@ -24,7 +24,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif #include <cpu/amd/amdk8_sysconf.h> @@ -112,7 +112,7 @@ void get_bus_conf(void) bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } -#if CONFIG_LOGICAL_CPUS == 1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/asus/m2n-e/romstage.c b/src/mainboard/asus/m2n-e/romstage.c index e820a79244..21ca89e6fd 100644 --- a/src/mainboard/asus/m2n-e/romstage.c +++ b/src/mainboard/asus/m2n-e/romstage.c @@ -20,7 +20,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#if CONFIG_K8_REV_F_SUPPORT == 1 +#if CONFIG_K8_REV_F_SUPPORT #define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 #endif @@ -134,7 +134,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_coherent_ht_domain(); /* Routing table and start other core0. */ wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS == 1 +#if CONFIG_LOGICAL_CPUS /* * It is said that we should start core1 after all core0 launched * becase optimize_link_coherent_ht is moved out from diff --git a/src/mainboard/asus/m2v-mx_se/mainboard.c b/src/mainboard/asus/m2v-mx_se/mainboard.c index 614af3908e..c936fa9042 100644 --- a/src/mainboard/asus/m2v-mx_se/mainboard.c +++ b/src/mainboard/asus/m2v-mx_se/mainboard.c @@ -30,7 +30,7 @@ uint64_t uma_memory_base, uma_memory_size; int add_mainboard_resources(struct lb_memory *mem) { -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, uma_memory_size); #endif diff --git a/src/mainboard/asus/m2v-mx_se/romstage.c b/src/mainboard/asus/m2v-mx_se/romstage.c index 9825e2bcfb..ac88f6a532 100644 --- a/src/mainboard/asus/m2v-mx_se/romstage.c +++ b/src/mainboard/asus/m2v-mx_se/romstage.c @@ -24,7 +24,7 @@ unsigned int get_sbdn(unsigned bus); -#if CONFIG_K8_REV_F_SUPPORT == 1 +#if CONFIG_K8_REV_F_SUPPORT #define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 #endif @@ -155,7 +155,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) printk(BIOS_INFO, "now booting... All core 0 started\n"); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS /* It is said that we should start core1 after all core0 launched. */ start_other_cores(); wait_all_other_cores_started(bsp_apicid); diff --git a/src/mainboard/asus/m2v/romstage.c b/src/mainboard/asus/m2v/romstage.c index 53a3fc38d2..367ef3b338 100644 --- a/src/mainboard/asus/m2v/romstage.c +++ b/src/mainboard/asus/m2v/romstage.c @@ -24,7 +24,7 @@ unsigned int get_sbdn(unsigned bus); -#if CONFIG_K8_REV_F_SUPPORT == 1 +#if CONFIG_K8_REV_F_SUPPORT #define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 #endif @@ -256,7 +256,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) printk(BIOS_INFO, "now booting... All core 0 started\n"); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS /* It is said that we should start core1 after all core0 launched. */ start_other_cores(); wait_all_other_cores_started(bsp_apicid); diff --git a/src/mainboard/asus/m4a78-em/get_bus_conf.c b/src/mainboard/asus/m4a78-em/get_bus_conf.c index b169775456..563a87efd5 100644 --- a/src/mainboard/asus/m4a78-em/get_bus_conf.c +++ b/src/mainboard/asus/m4a78-em/get_bus_conf.c @@ -23,7 +23,7 @@ #include <string.h> #include <stdint.h> #include <stdlib.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -107,7 +107,7 @@ void get_bus_conf(void) } /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/asus/m4a78-em/mainboard.c b/src/mainboard/asus/m4a78-em/mainboard.c index 4854208b9d..10ecb64e36 100644 --- a/src/mainboard/asus/m4a78-em/mainboard.c +++ b/src/mainboard/asus/m4a78-em/mainboard.c @@ -125,7 +125,7 @@ static void m4a78em_enable(device_t dev) { printk(BIOS_INFO, "Mainboard enable. dev=0x%p\n", dev); -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA msr_t msr, msr2; /* TOP_MEM: the top of DRAM below 4G */ diff --git a/src/mainboard/asus/m4a78-em/mptable.c b/src/mainboard/asus/m4a78-em/mptable.c index 4a276fb0c3..d7951cf8be 100644 --- a/src/mainboard/asus/m4a78-em/mptable.c +++ b/src/mainboard/asus/m4a78-em/mptable.c @@ -100,7 +100,7 @@ static void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_GENERATE_ACPI_TABLES == 0 +#if !CONFIG_GENERATE_ACPI_TABLES #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb700, (pin)) #else diff --git a/src/mainboard/asus/m4a78-em/romstage.c b/src/mainboard/asus/m4a78-em/romstage.c index a96592d20c..50bbfcac06 100644 --- a/src/mainboard/asus/m4a78-em/romstage.c +++ b/src/mainboard/asus/m4a78-em/romstage.c @@ -148,7 +148,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ wait_all_core0_started(); - #if CONFIG_LOGICAL_CPUS==1 + #if CONFIG_LOGICAL_CPUS /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(); diff --git a/src/mainboard/asus/m4a785-m/get_bus_conf.c b/src/mainboard/asus/m4a785-m/get_bus_conf.c index b169775456..563a87efd5 100644 --- a/src/mainboard/asus/m4a785-m/get_bus_conf.c +++ b/src/mainboard/asus/m4a785-m/get_bus_conf.c @@ -23,7 +23,7 @@ #include <string.h> #include <stdint.h> #include <stdlib.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -107,7 +107,7 @@ void get_bus_conf(void) } /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/asus/m4a785-m/mainboard.c b/src/mainboard/asus/m4a785-m/mainboard.c index d152f71d7d..3b681434c0 100644 --- a/src/mainboard/asus/m4a785-m/mainboard.c +++ b/src/mainboard/asus/m4a785-m/mainboard.c @@ -197,7 +197,7 @@ static void m4a785m_enable(device_t dev) { printk(BIOS_INFO, "Mainboard enable. dev=0x%p\n", dev); -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA msr_t msr, msr2; /* TOP_MEM: the top of DRAM below 4G */ diff --git a/src/mainboard/asus/m4a785-m/mptable.c b/src/mainboard/asus/m4a785-m/mptable.c index 4a276fb0c3..d7951cf8be 100644 --- a/src/mainboard/asus/m4a785-m/mptable.c +++ b/src/mainboard/asus/m4a785-m/mptable.c @@ -100,7 +100,7 @@ static void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_GENERATE_ACPI_TABLES == 0 +#if !CONFIG_GENERATE_ACPI_TABLES #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb700, (pin)) #else diff --git a/src/mainboard/asus/m4a785-m/romstage.c b/src/mainboard/asus/m4a785-m/romstage.c index 870af70f65..f0be2f7793 100644 --- a/src/mainboard/asus/m4a785-m/romstage.c +++ b/src/mainboard/asus/m4a785-m/romstage.c @@ -148,7 +148,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ wait_all_core0_started(); - #if CONFIG_LOGICAL_CPUS==1 + #if CONFIG_LOGICAL_CPUS /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(); diff --git a/src/mainboard/asus/m5a88-v/acpi_tables.c b/src/mainboard/asus/m5a88-v/acpi_tables.c index 9642bb4e19..fa93842dfc 100644 --- a/src/mainboard/asus/m5a88-v/acpi_tables.c +++ b/src/mainboard/asus/m5a88-v/acpi_tables.c @@ -236,7 +236,7 @@ unsigned long write_acpi_tables(unsigned long start) acpi_create_facs(facs); /* FDAT */ -#if CONFIG_BOARD_HAS_FADT == 1 +#if CONFIG_BOARD_HAS_FADT current = ALIGN(current, 8); printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); fadt = (acpi_fadt_t *) current; diff --git a/src/mainboard/asus/m5a88-v/get_bus_conf.c b/src/mainboard/asus/m5a88-v/get_bus_conf.c index 5c21e09d53..fcf0bd9100 100644 --- a/src/mainboard/asus/m5a88-v/get_bus_conf.c +++ b/src/mainboard/asus/m5a88-v/get_bus_conf.c @@ -23,7 +23,7 @@ #include <string.h> #include <stdint.h> #include <stdlib.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif #include <cpu/amd/amdfam10_sysconf.h> @@ -141,7 +141,7 @@ void get_bus_conf(void) /* I/O APICs: APIC ID Version State Address */ bus_isa = 10; -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/asus/m5a88-v/mainboard.c b/src/mainboard/asus/m5a88-v/mainboard.c index 7fa4ee7404..38b964839a 100644 --- a/src/mainboard/asus/m5a88-v/mainboard.c +++ b/src/mainboard/asus/m5a88-v/mainboard.c @@ -81,7 +81,7 @@ static void m5a88pm_v_enable(device_t dev) printk(BIOS_INFO, "Mainboard ASUS M5A88-V Enable. dev=0x%p\n", dev); -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA msr_t msr, msr2; /* TOP_MEM: the top of DRAM below 4G */ @@ -130,7 +130,7 @@ int add_mainboard_resources(struct lb_memory *mem) /* UMA is removed from system memory in the northbridge code, but * in some circumstances we want the memory mentioned as reserved. */ -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, diff --git a/src/mainboard/asus/m5a88-v/mptable.c b/src/mainboard/asus/m5a88-v/mptable.c index ac8ed5e45b..7daa5d1312 100644 --- a/src/mainboard/asus/m5a88-v/mptable.c +++ b/src/mainboard/asus/m5a88-v/mptable.c @@ -79,7 +79,7 @@ static void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_GENERATE_ACPI_TABLES == 0 +#if !CONFIG_GENERATE_ACPI_TABLES #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb800, (pin)) #else diff --git a/src/mainboard/asus/m5a88-v/platform_cfg.h b/src/mainboard/asus/m5a88-v/platform_cfg.h index 43573f19a5..00f9695440 100644 --- a/src/mainboard/asus/m5a88-v/platform_cfg.h +++ b/src/mainboard/asus/m5a88-v/platform_cfg.h @@ -36,7 +36,7 @@ * bigger than 1M you have to set the ROM size outside CIMx module and * before AGESA module get call. */ -#if CONFIG_COREBOOT_ROMSIZE_KB_1024 == 1 +#if CONFIG_COREBOOT_ROMSIZE_KB_1024 #define BIOS_SIZE BIOS_SIZE_1M #elif CONFIG_COREBOOT_ROMSIZE_KB_2048 == 1 #define BIOS_SIZE BIOS_SIZE_2M diff --git a/src/mainboard/asus/m5a88-v/romstage.c b/src/mainboard/asus/m5a88-v/romstage.c index 9d8e08ac66..22d87b37bc 100644 --- a/src/mainboard/asus/m5a88-v/romstage.c +++ b/src/mainboard/asus/m5a88-v/romstage.c @@ -159,7 +159,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(); @@ -172,7 +172,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* run _early_setup before soft-reset. */ rs780_early_setup(); -#if CONFIG_SET_FIDVID == 1 +#if CONFIG_SET_FIDVID msr = rdmsr(0xc0010071); printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); post_code(0x39); diff --git a/src/mainboard/avalue/eax-785e/acpi_tables.c b/src/mainboard/avalue/eax-785e/acpi_tables.c index 9642bb4e19..fa93842dfc 100644 --- a/src/mainboard/avalue/eax-785e/acpi_tables.c +++ b/src/mainboard/avalue/eax-785e/acpi_tables.c @@ -236,7 +236,7 @@ unsigned long write_acpi_tables(unsigned long start) acpi_create_facs(facs); /* FDAT */ -#if CONFIG_BOARD_HAS_FADT == 1 +#if CONFIG_BOARD_HAS_FADT current = ALIGN(current, 8); printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); fadt = (acpi_fadt_t *) current; diff --git a/src/mainboard/avalue/eax-785e/get_bus_conf.c b/src/mainboard/avalue/eax-785e/get_bus_conf.c index 20a856e362..fcf0bd9100 100644 --- a/src/mainboard/avalue/eax-785e/get_bus_conf.c +++ b/src/mainboard/avalue/eax-785e/get_bus_conf.c @@ -23,11 +23,11 @@ #include <string.h> #include <stdint.h> #include <stdlib.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif #include <cpu/amd/amdfam10_sysconf.h> -#if CONFIG_AMD_SB_CIMX == 1 +#if CONFIG_AMD_SB_CIMX #include <sb_cimx.h> #endif @@ -141,14 +141,14 @@ void get_bus_conf(void) /* I/O APICs: APIC ID Version State Address */ bus_isa = 10; -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif apicid_sb800 = apicid_base + 0; -#if CONFIG_AMD_SB_CIMX == 1 +#if CONFIG_AMD_SB_CIMX sb_Late_Post(); #endif } diff --git a/src/mainboard/avalue/eax-785e/mainboard.c b/src/mainboard/avalue/eax-785e/mainboard.c index 7f55c0321a..52befa5a47 100644 --- a/src/mainboard/avalue/eax-785e/mainboard.c +++ b/src/mainboard/avalue/eax-785e/mainboard.c @@ -84,7 +84,7 @@ static void eax_785e(device_t dev) printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA msr_t msr, msr2; /* TOP_MEM: the top of DRAM below 4G */ @@ -133,7 +133,7 @@ int add_mainboard_resources(struct lb_memory *mem) /* UMA is removed from system memory in the northbridge code, but * in some circumstances we want the memory mentioned as reserved. */ -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, diff --git a/src/mainboard/avalue/eax-785e/mptable.c b/src/mainboard/avalue/eax-785e/mptable.c index 6f541a0012..bf5a684446 100644 --- a/src/mainboard/avalue/eax-785e/mptable.c +++ b/src/mainboard/avalue/eax-785e/mptable.c @@ -80,7 +80,7 @@ static void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_GENERATE_ACPI_TABLES == 0 +#if !CONFIG_GENERATE_ACPI_TABLES #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb800, (pin)) #else diff --git a/src/mainboard/avalue/eax-785e/platform_cfg.h b/src/mainboard/avalue/eax-785e/platform_cfg.h index e503585525..1ce1c5141c 100644 --- a/src/mainboard/avalue/eax-785e/platform_cfg.h +++ b/src/mainboard/avalue/eax-785e/platform_cfg.h @@ -37,7 +37,7 @@ * before AGESA module get call. */ #ifndef BIOS_SIZE -#if CONFIG_COREBOOT_ROMSIZE_KB_1024 == 1 +#if CONFIG_COREBOOT_ROMSIZE_KB_1024 #define BIOS_SIZE BIOS_SIZE_1M #elif CONFIG_COREBOOT_ROMSIZE_KB_2048 == 1 #define BIOS_SIZE BIOS_SIZE_2M diff --git a/src/mainboard/avalue/eax-785e/romstage.c b/src/mainboard/avalue/eax-785e/romstage.c index beea992350..366723580a 100644 --- a/src/mainboard/avalue/eax-785e/romstage.c +++ b/src/mainboard/avalue/eax-785e/romstage.c @@ -161,7 +161,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(); @@ -174,7 +174,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* run _early_setup before soft-reset. */ rs780_early_setup(); -#if CONFIG_SET_FIDVID == 1 +#if CONFIG_SET_FIDVID msr = rdmsr(0xc0010071); printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); post_code(0x39); diff --git a/src/mainboard/broadcom/blast/get_bus_conf.c b/src/mainboard/broadcom/blast/get_bus_conf.c index 869f04967b..36959a4a7b 100644 --- a/src/mainboard/broadcom/blast/get_bus_conf.c +++ b/src/mainboard/broadcom/blast/get_bus_conf.c @@ -3,7 +3,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -101,7 +101,7 @@ void get_bus_conf(void) /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(3); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/broadcom/blast/mptable.c b/src/mainboard/broadcom/blast/mptable.c index 5a1bf28bf3..d7ae6b787c 100644 --- a/src/mainboard/broadcom/blast/mptable.c +++ b/src/mainboard/broadcom/blast/mptable.c @@ -4,7 +4,7 @@ #include <device/pci.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif #include <cpu/amd/amdk8_sysconf.h> diff --git a/src/mainboard/broadcom/blast/romstage.c b/src/mainboard/broadcom/blast/romstage.c index 4dee7637c9..df7b615c15 100644 --- a/src/mainboard/broadcom/blast/romstage.c +++ b/src/mainboard/broadcom/blast/romstage.c @@ -105,7 +105,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) needs_reset = setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched wait_all_core0_started(); start_other_cores(); diff --git a/src/mainboard/emulation/qemu-x86/northbridge.c b/src/mainboard/emulation/qemu-x86/northbridge.c index b961e8b60c..f1669bbd15 100644 --- a/src/mainboard/emulation/qemu-x86/northbridge.c +++ b/src/mainboard/emulation/qemu-x86/northbridge.c @@ -12,7 +12,7 @@ #include <delay.h> #include <smbios.h> -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES #include <cbmem.h> #endif @@ -54,7 +54,7 @@ static void cpu_pci_domain_set_resources(device_t dev) ram_resource(dev, idx++, 0, 640); ram_resource(dev, idx++, 768, tolmk - 768); -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES /* Leave some space for ACPI, PIRQ and MP tables */ high_tables_base = (tomk * 1024) - HIGH_MEMORY_SIZE; high_tables_size = HIGH_MEMORY_SIZE; diff --git a/src/mainboard/getac/p470/romstage.c b/src/mainboard/getac/p470/romstage.c index afad4bc820..90fc25f582 100644 --- a/src/mainboard/getac/p470/romstage.c +++ b/src/mainboard/getac/p470/romstage.c @@ -341,7 +341,7 @@ void main(unsigned long bist) /* Initialize the internal PCIe links before we go into stage2 */ i945_late_initialization(); -#if CONFIG_HAVE_ACPI_RESUME == 0 +#if !CONFIG_HAVE_ACPI_RESUME /* When doing resume, we must not overwrite RAM */ #if CONFIG_DEBUG_RAM_SETUP sdram_dump_mchbar_registers(); diff --git a/src/mainboard/gigabyte/ga_2761gxdk/get_bus_conf.c b/src/mainboard/gigabyte/ga_2761gxdk/get_bus_conf.c index 2fda60645a..c27dd2352d 100644 --- a/src/mainboard/gigabyte/ga_2761gxdk/get_bus_conf.c +++ b/src/mainboard/gigabyte/ga_2761gxdk/get_bus_conf.c @@ -26,7 +26,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -119,7 +119,7 @@ void get_bus_conf(void) /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/gigabyte/ga_2761gxdk/romstage.c b/src/mainboard/gigabyte/ga_2761gxdk/romstage.c index 0ba4c59121..5a36ac61cd 100644 --- a/src/mainboard/gigabyte/ga_2761gxdk/romstage.c +++ b/src/mainboard/gigabyte/ga_2761gxdk/romstage.c @@ -21,7 +21,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#if CONFIG_K8_REV_F_SUPPORT == 1 +#if CONFIG_K8_REV_F_SUPPORT #define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 #endif @@ -156,7 +156,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_coherent_ht_domain(); // routing table and start other core0 wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, * So here need to make sure last core0 is started, esp for two way system, diff --git a/src/mainboard/gigabyte/m57sli/get_bus_conf.c b/src/mainboard/gigabyte/m57sli/get_bus_conf.c index 0df65c7d6b..b26417078d 100644 --- a/src/mainboard/gigabyte/m57sli/get_bus_conf.c +++ b/src/mainboard/gigabyte/m57sli/get_bus_conf.c @@ -24,7 +24,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -117,7 +117,7 @@ void get_bus_conf(void) /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/gigabyte/m57sli/romstage.c b/src/mainboard/gigabyte/m57sli/romstage.c index 16d2453972..7bf7406e69 100644 --- a/src/mainboard/gigabyte/m57sli/romstage.c +++ b/src/mainboard/gigabyte/m57sli/romstage.c @@ -19,7 +19,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#if CONFIG_K8_REV_F_SUPPORT == 1 +#if CONFIG_K8_REV_F_SUPPORT #define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 #endif @@ -159,7 +159,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_coherent_ht_domain(); // routing table and start other core0 wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, * So here need to make sure last core0 is started, esp for two way system, diff --git a/src/mainboard/gigabyte/ma785gm/get_bus_conf.c b/src/mainboard/gigabyte/ma785gm/get_bus_conf.c index b169775456..563a87efd5 100644 --- a/src/mainboard/gigabyte/ma785gm/get_bus_conf.c +++ b/src/mainboard/gigabyte/ma785gm/get_bus_conf.c @@ -23,7 +23,7 @@ #include <string.h> #include <stdint.h> #include <stdlib.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -107,7 +107,7 @@ void get_bus_conf(void) } /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/gigabyte/ma785gm/mainboard.c b/src/mainboard/gigabyte/ma785gm/mainboard.c index 989dfb5f50..254df007ef 100644 --- a/src/mainboard/gigabyte/ma785gm/mainboard.c +++ b/src/mainboard/gigabyte/ma785gm/mainboard.c @@ -142,7 +142,7 @@ static void ma785gm_enable(device_t dev) { printk(BIOS_INFO, "Mainboard MA785GM-US2H Enable. dev=0x%p\n", dev); -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA msr_t msr, msr2; /* TOP_MEM: the top of DRAM below 4G */ @@ -191,7 +191,7 @@ int add_mainboard_resources(struct lb_memory *mem) /* UMA is removed from system memory in the northbridge code, but * in some circumstances we want the memory mentioned as reserved. */ -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, diff --git a/src/mainboard/gigabyte/ma785gm/mptable.c b/src/mainboard/gigabyte/ma785gm/mptable.c index 4a276fb0c3..d7951cf8be 100644 --- a/src/mainboard/gigabyte/ma785gm/mptable.c +++ b/src/mainboard/gigabyte/ma785gm/mptable.c @@ -100,7 +100,7 @@ static void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_GENERATE_ACPI_TABLES == 0 +#if !CONFIG_GENERATE_ACPI_TABLES #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb700, (pin)) #else diff --git a/src/mainboard/gigabyte/ma785gm/romstage.c b/src/mainboard/gigabyte/ma785gm/romstage.c index 68f3dcc3b1..f118c3c5c4 100644 --- a/src/mainboard/gigabyte/ma785gm/romstage.c +++ b/src/mainboard/gigabyte/ma785gm/romstage.c @@ -143,7 +143,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(); diff --git a/src/mainboard/gigabyte/ma785gmt/get_bus_conf.c b/src/mainboard/gigabyte/ma785gmt/get_bus_conf.c index b169775456..563a87efd5 100644 --- a/src/mainboard/gigabyte/ma785gmt/get_bus_conf.c +++ b/src/mainboard/gigabyte/ma785gmt/get_bus_conf.c @@ -23,7 +23,7 @@ #include <string.h> #include <stdint.h> #include <stdlib.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -107,7 +107,7 @@ void get_bus_conf(void) } /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/gigabyte/ma785gmt/mainboard.c b/src/mainboard/gigabyte/ma785gmt/mainboard.c index 5747e62853..8d669bab52 100644 --- a/src/mainboard/gigabyte/ma785gmt/mainboard.c +++ b/src/mainboard/gigabyte/ma785gmt/mainboard.c @@ -252,7 +252,7 @@ static void ma785gmt_enable(device_t dev) { printk(BIOS_INFO, "Mainboard MA785GMT-UD2H Enable. dev=0x%p\n", dev); -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA msr_t msr, msr2; /* TOP_MEM: the top of DRAM below 4G */ @@ -302,7 +302,7 @@ int add_mainboard_resources(struct lb_memory *mem) /* UMA is removed from system memory in the northbridge code, but * in some circumstances we want the memory mentioned as reserved. */ -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, diff --git a/src/mainboard/gigabyte/ma785gmt/mptable.c b/src/mainboard/gigabyte/ma785gmt/mptable.c index 4a276fb0c3..d7951cf8be 100644 --- a/src/mainboard/gigabyte/ma785gmt/mptable.c +++ b/src/mainboard/gigabyte/ma785gmt/mptable.c @@ -100,7 +100,7 @@ static void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_GENERATE_ACPI_TABLES == 0 +#if !CONFIG_GENERATE_ACPI_TABLES #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb700, (pin)) #else diff --git a/src/mainboard/gigabyte/ma785gmt/romstage.c b/src/mainboard/gigabyte/ma785gmt/romstage.c index 68f3dcc3b1..f118c3c5c4 100644 --- a/src/mainboard/gigabyte/ma785gmt/romstage.c +++ b/src/mainboard/gigabyte/ma785gmt/romstage.c @@ -143,7 +143,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(); diff --git a/src/mainboard/gigabyte/ma78gm/get_bus_conf.c b/src/mainboard/gigabyte/ma78gm/get_bus_conf.c index b169775456..563a87efd5 100644 --- a/src/mainboard/gigabyte/ma78gm/get_bus_conf.c +++ b/src/mainboard/gigabyte/ma78gm/get_bus_conf.c @@ -23,7 +23,7 @@ #include <string.h> #include <stdint.h> #include <stdlib.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -107,7 +107,7 @@ void get_bus_conf(void) } /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/gigabyte/ma78gm/mainboard.c b/src/mainboard/gigabyte/ma78gm/mainboard.c index 1a00af6a5e..ee353edc03 100644 --- a/src/mainboard/gigabyte/ma78gm/mainboard.c +++ b/src/mainboard/gigabyte/ma78gm/mainboard.c @@ -79,7 +79,7 @@ static void ma78gm_enable(device_t dev) { printk(BIOS_INFO, "Mainboard MA78GM-US2H Enable. dev=0x%p\n", dev); -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA msr_t msr, msr2; /* TOP_MEM: the top of DRAM below 4G */ @@ -128,7 +128,7 @@ int add_mainboard_resources(struct lb_memory *mem) /* UMA is removed from system memory in the northbridge code, but * in some circumstances we want the memory mentioned as reserved. */ -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, diff --git a/src/mainboard/gigabyte/ma78gm/mptable.c b/src/mainboard/gigabyte/ma78gm/mptable.c index 4a276fb0c3..d7951cf8be 100644 --- a/src/mainboard/gigabyte/ma78gm/mptable.c +++ b/src/mainboard/gigabyte/ma78gm/mptable.c @@ -100,7 +100,7 @@ static void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_GENERATE_ACPI_TABLES == 0 +#if !CONFIG_GENERATE_ACPI_TABLES #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb700, (pin)) #else diff --git a/src/mainboard/gigabyte/ma78gm/romstage.c b/src/mainboard/gigabyte/ma78gm/romstage.c index 6c25a9e79d..4f9082342e 100644 --- a/src/mainboard/gigabyte/ma78gm/romstage.c +++ b/src/mainboard/gigabyte/ma78gm/romstage.c @@ -146,7 +146,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(); diff --git a/src/mainboard/hp/dl145_g1/get_bus_conf.c b/src/mainboard/hp/dl145_g1/get_bus_conf.c index b7bbaade81..9ca5792e63 100644 --- a/src/mainboard/hp/dl145_g1/get_bus_conf.c +++ b/src/mainboard/hp/dl145_g1/get_bus_conf.c @@ -3,7 +3,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -100,7 +100,7 @@ void get_bus_conf(void) /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(3); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/hp/dl145_g1/romstage.c b/src/mainboard/hp/dl145_g1/romstage.c index 6b8972b5c4..a75d5e14fa 100644 --- a/src/mainboard/hp/dl145_g1/romstage.c +++ b/src/mainboard/hp/dl145_g1/romstage.c @@ -126,7 +126,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) #endif setup_coherent_ht_domain(); wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched start_other_cores(); wait_all_other_cores_started(bsp_apicid); diff --git a/src/mainboard/hp/dl145_g3/get_bus_conf.c b/src/mainboard/hp/dl145_g3/get_bus_conf.c index 36852f1301..b1d1b226b5 100644 --- a/src/mainboard/hp/dl145_g3/get_bus_conf.c +++ b/src/mainboard/hp/dl145_g3/get_bus_conf.c @@ -26,7 +26,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -127,7 +127,7 @@ void get_bus_conf(void) /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(3); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/hp/dl145_g3/mptable.c b/src/mainboard/hp/dl145_g3/mptable.c index 609432aaa0..0b6095f06b 100644 --- a/src/mainboard/hp/dl145_g3/mptable.c +++ b/src/mainboard/hp/dl145_g3/mptable.c @@ -33,7 +33,7 @@ #include <device/pci.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif #include <cpu/amd/amdk8_sysconf.h> diff --git a/src/mainboard/hp/dl145_g3/romstage.c b/src/mainboard/hp/dl145_g3/romstage.c index a46218a2b0..872a3377fb 100644 --- a/src/mainboard/hp/dl145_g3/romstage.c +++ b/src/mainboard/hp/dl145_g3/romstage.c @@ -25,7 +25,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#if CONFIG_K8_REV_F_SUPPORT == 1 +#if CONFIG_K8_REV_F_SUPPORT #define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 #endif @@ -169,7 +169,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_coherent_ht_domain(); wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, * So here need to make sure last core0 is started, esp for two way system, diff --git a/src/mainboard/hp/dl165_g6_fam10/get_bus_conf.c b/src/mainboard/hp/dl165_g6_fam10/get_bus_conf.c index 7f4112b542..f313ced51b 100644 --- a/src/mainboard/hp/dl165_g6_fam10/get_bus_conf.c +++ b/src/mainboard/hp/dl165_g6_fam10/get_bus_conf.c @@ -24,7 +24,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif diff --git a/src/mainboard/hp/dl165_g6_fam10/mptable.c b/src/mainboard/hp/dl165_g6_fam10/mptable.c index 00234a31dc..5f77d0397f 100644 --- a/src/mainboard/hp/dl165_g6_fam10/mptable.c +++ b/src/mainboard/hp/dl165_g6_fam10/mptable.c @@ -33,7 +33,7 @@ #include <device/pci.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif #include <cpu/amd/amdfam10_sysconf.h> diff --git a/src/mainboard/hp/dl165_g6_fam10/romstage.c b/src/mainboard/hp/dl165_g6_fam10/romstage.c index 32a94d425b..8235f9c308 100644 --- a/src/mainboard/hp/dl165_g6_fam10/romstage.c +++ b/src/mainboard/hp/dl165_g6_fam10/romstage.c @@ -164,7 +164,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(); diff --git a/src/mainboard/ibm/e325/romstage.c b/src/mainboard/ibm/e325/romstage.c index 5208790268..b10f6934c4 100644 --- a/src/mainboard/ibm/e325/romstage.c +++ b/src/mainboard/ibm/e325/romstage.c @@ -102,7 +102,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) needs_reset = setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched start_other_cores(); #endif diff --git a/src/mainboard/ibm/e326/romstage.c b/src/mainboard/ibm/e326/romstage.c index 0cb0cce209..93afa39e87 100644 --- a/src/mainboard/ibm/e326/romstage.c +++ b/src/mainboard/ibm/e326/romstage.c @@ -102,7 +102,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) needs_reset = setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched start_other_cores(); #endif diff --git a/src/mainboard/iei/kino-780am2-fam10/get_bus_conf.c b/src/mainboard/iei/kino-780am2-fam10/get_bus_conf.c index b169775456..563a87efd5 100644 --- a/src/mainboard/iei/kino-780am2-fam10/get_bus_conf.c +++ b/src/mainboard/iei/kino-780am2-fam10/get_bus_conf.c @@ -23,7 +23,7 @@ #include <string.h> #include <stdint.h> #include <stdlib.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -107,7 +107,7 @@ void get_bus_conf(void) } /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/iei/kino-780am2-fam10/mainboard.c b/src/mainboard/iei/kino-780am2-fam10/mainboard.c index 4d0cd0985c..ef02c89a85 100644 --- a/src/mainboard/iei/kino-780am2-fam10/mainboard.c +++ b/src/mainboard/iei/kino-780am2-fam10/mainboard.c @@ -61,7 +61,7 @@ static void kino_enable(device_t dev) { printk(BIOS_INFO, "Mainboard Kino Enable. dev=0x%p\n", dev); -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA msr_t msr, msr2; /* TOP_MEM: the top of DRAM below 4G */ @@ -110,7 +110,7 @@ int add_mainboard_resources(struct lb_memory *mem) /* UMA is removed from system memory in the northbridge code, but * in some circumstances we want the memory mentioned as reserved. */ -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, diff --git a/src/mainboard/iei/kino-780am2-fam10/mptable.c b/src/mainboard/iei/kino-780am2-fam10/mptable.c index a26fbde463..b00796901c 100644 --- a/src/mainboard/iei/kino-780am2-fam10/mptable.c +++ b/src/mainboard/iei/kino-780am2-fam10/mptable.c @@ -100,7 +100,7 @@ static void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_GENERATE_ACPI_TABLES == 0 +#if !CONFIG_GENERATE_ACPI_TABLES #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb700, (pin)) #else diff --git a/src/mainboard/iei/kino-780am2-fam10/romstage.c b/src/mainboard/iei/kino-780am2-fam10/romstage.c index f51b3ece72..431883140c 100644 --- a/src/mainboard/iei/kino-780am2-fam10/romstage.c +++ b/src/mainboard/iei/kino-780am2-fam10/romstage.c @@ -149,7 +149,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ wait_all_core0_started(); - #if CONFIG_LOGICAL_CPUS==1 + #if CONFIG_LOGICAL_CPUS /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(); diff --git a/src/mainboard/intel/eagleheights/fadt.c b/src/mainboard/intel/eagleheights/fadt.c index 40be3ea3c2..c584c62b68 100644 --- a/src/mainboard/intel/eagleheights/fadt.c +++ b/src/mainboard/intel/eagleheights/fadt.c @@ -67,7 +67,7 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) fadt->dsdt = (unsigned long) dsdt; fadt->preferred_pm_profile = 7; /* Performance Server */ fadt->sci_int = 0x9; -#if CONFIG_HAVE_SMI_HANDLER == 1 +#if CONFIG_HAVE_SMI_HANDLER fadt->smi_cmd = APM_CNT; #else fadt->smi_cmd = 0x00; diff --git a/src/mainboard/iwill/dk8_htx/get_bus_conf.c b/src/mainboard/iwill/dk8_htx/get_bus_conf.c index aa6d21f849..4f63ff592f 100644 --- a/src/mainboard/iwill/dk8_htx/get_bus_conf.c +++ b/src/mainboard/iwill/dk8_htx/get_bus_conf.c @@ -3,7 +3,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -191,7 +191,7 @@ void get_bus_conf(void) /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(3); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/iwill/dk8_htx/mptable.c b/src/mainboard/iwill/dk8_htx/mptable.c index 39776730e0..ff6e582006 100644 --- a/src/mainboard/iwill/dk8_htx/mptable.c +++ b/src/mainboard/iwill/dk8_htx/mptable.c @@ -4,7 +4,7 @@ #include <device/pci.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif #include <cpu/amd/amdk8_sysconf.h> diff --git a/src/mainboard/iwill/dk8_htx/romstage.c b/src/mainboard/iwill/dk8_htx/romstage.c index 5a2444763c..906105e8ad 100644 --- a/src/mainboard/iwill/dk8_htx/romstage.c +++ b/src/mainboard/iwill/dk8_htx/romstage.c @@ -1,4 +1,4 @@ -#if CONFIG_K8_REV_F_SUPPORT == 1 +#if CONFIG_K8_REV_F_SUPPORT #define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 #endif @@ -109,7 +109,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_coherent_ht_domain(); // routing table and start other core0 wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, * So here need to make sure last core0 is started, esp for two way system, diff --git a/src/mainboard/iwill/dk8s2/romstage.c b/src/mainboard/iwill/dk8s2/romstage.c index 4125c66efd..4600fa6acd 100644 --- a/src/mainboard/iwill/dk8s2/romstage.c +++ b/src/mainboard/iwill/dk8s2/romstage.c @@ -1,4 +1,4 @@ -#if CONFIG_K8_REV_F_SUPPORT == 1 +#if CONFIG_K8_REV_F_SUPPORT #define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 #endif @@ -110,7 +110,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_coherent_ht_domain(); // routing table and start other core0 wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, * So here need to make sure last core0 is started, esp for two way system, diff --git a/src/mainboard/iwill/dk8x/romstage.c b/src/mainboard/iwill/dk8x/romstage.c index 765114c6fb..89a652ab82 100644 --- a/src/mainboard/iwill/dk8x/romstage.c +++ b/src/mainboard/iwill/dk8x/romstage.c @@ -1,4 +1,4 @@ -#if CONFIG_K8_REV_F_SUPPORT == 1 +#if CONFIG_K8_REV_F_SUPPORT #define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 #endif @@ -110,7 +110,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_coherent_ht_domain(); // routing table and start other core0 wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, * So here need to make sure last core0 is started, esp for two way system, diff --git a/src/mainboard/jetway/pa78vm5/get_bus_conf.c b/src/mainboard/jetway/pa78vm5/get_bus_conf.c index b169775456..563a87efd5 100644 --- a/src/mainboard/jetway/pa78vm5/get_bus_conf.c +++ b/src/mainboard/jetway/pa78vm5/get_bus_conf.c @@ -23,7 +23,7 @@ #include <string.h> #include <stdint.h> #include <stdlib.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -107,7 +107,7 @@ void get_bus_conf(void) } /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/jetway/pa78vm5/mainboard.c b/src/mainboard/jetway/pa78vm5/mainboard.c index 6d0ceba31e..e992f74e85 100644 --- a/src/mainboard/jetway/pa78vm5/mainboard.c +++ b/src/mainboard/jetway/pa78vm5/mainboard.c @@ -108,7 +108,7 @@ static void pa78vm5_enable(device_t dev) { printk(BIOS_INFO, "Mainboard PA78VM5 Enable. dev=0x%p\n", dev); -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA msr_t msr, msr2; /* TOP_MEM: the top of DRAM below 4G */ @@ -157,7 +157,7 @@ int add_mainboard_resources(struct lb_memory *mem) /* UMA is removed from system memory in the northbridge code, but * in some circumstances we want the memory mentioned as reserved. */ -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, diff --git a/src/mainboard/jetway/pa78vm5/mptable.c b/src/mainboard/jetway/pa78vm5/mptable.c index b8caa23ce2..40d2d6bfe3 100644 --- a/src/mainboard/jetway/pa78vm5/mptable.c +++ b/src/mainboard/jetway/pa78vm5/mptable.c @@ -101,7 +101,7 @@ static void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_GENERATE_ACPI_TABLES == 0 +#if !CONFIG_GENERATE_ACPI_TABLES #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb700, (pin)) #else diff --git a/src/mainboard/jetway/pa78vm5/romstage.c b/src/mainboard/jetway/pa78vm5/romstage.c index ba3b2084d2..338c7f3774 100644 --- a/src/mainboard/jetway/pa78vm5/romstage.c +++ b/src/mainboard/jetway/pa78vm5/romstage.c @@ -154,7 +154,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ wait_all_core0_started(); - #if CONFIG_LOGICAL_CPUS==1 + #if CONFIG_LOGICAL_CPUS /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(); diff --git a/src/mainboard/kontron/kt690/get_bus_conf.c b/src/mainboard/kontron/kt690/get_bus_conf.c index 2b0fca7abf..d4152a1314 100644 --- a/src/mainboard/kontron/kt690/get_bus_conf.c +++ b/src/mainboard/kontron/kt690/get_bus_conf.c @@ -23,7 +23,7 @@ #include <string.h> #include <stdint.h> #include <stdlib.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -107,7 +107,7 @@ void get_bus_conf(void) } /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/kontron/kt690/mainboard.c b/src/mainboard/kontron/kt690/mainboard.c index 2e0c8e7755..c2a401e0c4 100644 --- a/src/mainboard/kontron/kt690/mainboard.c +++ b/src/mainboard/kontron/kt690/mainboard.c @@ -187,7 +187,7 @@ static void kt690_enable(device_t dev) { printk(BIOS_INFO, "Mainboard KT690 Enable. dev=0x%p\n", dev); -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA msr_t msr, msr2; /* TOP_MEM: the top of DRAM below 4G */ @@ -238,7 +238,7 @@ int add_mainboard_resources(struct lb_memory *mem) /* UMA is removed from system memory in the northbridge code, but * in some circumstances we want the memory mentioned as reserved. */ -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA printk(BIOS_INFO, "uma_memory_base=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, diff --git a/src/mainboard/kontron/kt690/mptable.c b/src/mainboard/kontron/kt690/mptable.c index 4ffba6f310..bb3232a1cf 100644 --- a/src/mainboard/kontron/kt690/mptable.c +++ b/src/mainboard/kontron/kt690/mptable.c @@ -99,7 +99,7 @@ static void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_GENERATE_ACPI_TABLES == 0 +#if !CONFIG_GENERATE_ACPI_TABLES #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb600, (pin)) #else diff --git a/src/mainboard/kontron/kt690/romstage.c b/src/mainboard/kontron/kt690/romstage.c index 621c27f6b6..ee172087b4 100644 --- a/src/mainboard/kontron/kt690/romstage.c +++ b/src/mainboard/kontron/kt690/romstage.c @@ -104,7 +104,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS /* It is said that we should start core1 after all core0 launched */ wait_all_core0_started(); start_other_cores(); diff --git a/src/mainboard/msi/ms7135/get_bus_conf.c b/src/mainboard/msi/ms7135/get_bus_conf.c index cfcce2fa8b..fe75f78f5a 100644 --- a/src/mainboard/msi/ms7135/get_bus_conf.c +++ b/src/mainboard/msi/ms7135/get_bus_conf.c @@ -27,7 +27,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS == 1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -98,7 +98,7 @@ void get_bus_conf(void) } /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(3); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/msi/ms7135/romstage.c b/src/mainboard/msi/ms7135/romstage.c index 773d93e8dc..515f7d7eae 100644 --- a/src/mainboard/msi/ms7135/romstage.c +++ b/src/mainboard/msi/ms7135/romstage.c @@ -140,7 +140,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) needs_reset = setup_coherent_ht_domain(); wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched start_other_cores(); wait_all_other_cores_started(bsp_apicid); diff --git a/src/mainboard/msi/ms7260/get_bus_conf.c b/src/mainboard/msi/ms7260/get_bus_conf.c index fadc3fe703..0f053cdb67 100644 --- a/src/mainboard/msi/ms7260/get_bus_conf.c +++ b/src/mainboard/msi/ms7260/get_bus_conf.c @@ -24,7 +24,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif #include <cpu/amd/amdk8_sysconf.h> @@ -117,7 +117,7 @@ void get_bus_conf(void) } /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/msi/ms7260/romstage.c b/src/mainboard/msi/ms7260/romstage.c index b384119c45..5ec26a9ec0 100644 --- a/src/mainboard/msi/ms7260/romstage.c +++ b/src/mainboard/msi/ms7260/romstage.c @@ -20,7 +20,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#if CONFIG_K8_REV_F_SUPPORT == 1 +#if CONFIG_K8_REV_F_SUPPORT #define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 #endif @@ -152,7 +152,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_coherent_ht_domain(); /* Routing table and start other core0. */ wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS == 1 +#if CONFIG_LOGICAL_CPUS /* It is said that we should start core1 after all core0 launched * becase optimize_link_coherent_ht is moved out from * setup_coherent_ht_domain, so here need to make sure last core0 is diff --git a/src/mainboard/msi/ms9185/get_bus_conf.c b/src/mainboard/msi/ms9185/get_bus_conf.c index 0e97de6ed4..b20288bad3 100644 --- a/src/mainboard/msi/ms9185/get_bus_conf.c +++ b/src/mainboard/msi/ms9185/get_bus_conf.c @@ -26,7 +26,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -124,7 +124,7 @@ void get_bus_conf(void) /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(3); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/msi/ms9185/mptable.c b/src/mainboard/msi/ms9185/mptable.c index fe65d7df95..c28074c33d 100644 --- a/src/mainboard/msi/ms9185/mptable.c +++ b/src/mainboard/msi/ms9185/mptable.c @@ -30,7 +30,7 @@ #include <device/pci.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif #include <cpu/amd/amdk8_sysconf.h> diff --git a/src/mainboard/msi/ms9185/romstage.c b/src/mainboard/msi/ms9185/romstage.c index a2505d6eae..1a72ae07b3 100644 --- a/src/mainboard/msi/ms9185/romstage.c +++ b/src/mainboard/msi/ms9185/romstage.c @@ -143,7 +143,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_coherent_ht_domain(); wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, * So here need to make sure last core0 is started, esp for two way system, diff --git a/src/mainboard/msi/ms9282/get_bus_conf.c b/src/mainboard/msi/ms9282/get_bus_conf.c index 833b29b711..7ce44abdaf 100644 --- a/src/mainboard/msi/ms9282/get_bus_conf.c +++ b/src/mainboard/msi/ms9282/get_bus_conf.c @@ -27,7 +27,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -118,7 +118,7 @@ void get_bus_conf(void) } /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/msi/ms9282/romstage.c b/src/mainboard/msi/ms9282/romstage.c index e73e5d71f7..46492a2921 100644 --- a/src/mainboard/msi/ms9282/romstage.c +++ b/src/mainboard/msi/ms9282/romstage.c @@ -156,7 +156,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched start_other_cores(); //wait_all_other_cores_started(bsp_apicid); diff --git a/src/mainboard/msi/ms9652_fam10/get_bus_conf.c b/src/mainboard/msi/ms9652_fam10/get_bus_conf.c index 746abc88b2..605b70e879 100644 --- a/src/mainboard/msi/ms9652_fam10/get_bus_conf.c +++ b/src/mainboard/msi/ms9652_fam10/get_bus_conf.c @@ -24,7 +24,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -116,7 +116,7 @@ void get_bus_conf(void) } /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); printk(BIOS_SPEW, "CONFIG_LOGICAL_CPUS==1: apicid_base: %08x\n", apicid_base); #else diff --git a/src/mainboard/msi/ms9652_fam10/romstage.c b/src/mainboard/msi/ms9652_fam10/romstage.c index 0bf6d114be..3bb436a7ca 100644 --- a/src/mainboard/msi/ms9652_fam10/romstage.c +++ b/src/mainboard/msi/ms9652_fam10/romstage.c @@ -178,7 +178,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(); diff --git a/src/mainboard/newisys/khepri/romstage.c b/src/mainboard/newisys/khepri/romstage.c index 83acd52c35..1098275ab3 100644 --- a/src/mainboard/newisys/khepri/romstage.c +++ b/src/mainboard/newisys/khepri/romstage.c @@ -103,7 +103,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) needs_reset = setup_coherent_ht_domain(); wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched start_other_cores(); wait_all_other_cores_started(bsp_apicid); diff --git a/src/mainboard/nvidia/l1_2pvv/get_bus_conf.c b/src/mainboard/nvidia/l1_2pvv/get_bus_conf.c index 99f8431d86..b06f758600 100644 --- a/src/mainboard/nvidia/l1_2pvv/get_bus_conf.c +++ b/src/mainboard/nvidia/l1_2pvv/get_bus_conf.c @@ -24,7 +24,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -134,7 +134,7 @@ void get_bus_conf(void) } /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(2); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/nvidia/l1_2pvv/romstage.c b/src/mainboard/nvidia/l1_2pvv/romstage.c index 94aa14a2ce..454bcac18d 100644 --- a/src/mainboard/nvidia/l1_2pvv/romstage.c +++ b/src/mainboard/nvidia/l1_2pvv/romstage.c @@ -19,7 +19,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#if CONFIG_K8_REV_F_SUPPORT == 1 +#if CONFIG_K8_REV_F_SUPPORT #define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 #endif @@ -148,7 +148,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_coherent_ht_domain(); // routing table and start other core0 wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, * So here need to make sure last core0 is started, esp for two way system, diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c b/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c index bae2782399..9cdaa649d4 100644 --- a/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c +++ b/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c @@ -148,7 +148,7 @@ unsigned long acpi_fill_madt(unsigned long current) /* Write SB600 IOAPIC, only one */ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, IO_APIC_ADDR, 0); -#if CONFIG_LINT01_CONVERSION == 0 +#if !CONFIG_LINT01_CONVERSION current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) current, 0, 0, 2, 0); diff --git a/src/mainboard/siemens/sitemp_g1p1/get_bus_conf.c b/src/mainboard/siemens/sitemp_g1p1/get_bus_conf.c index 2b0fca7abf..d4152a1314 100644 --- a/src/mainboard/siemens/sitemp_g1p1/get_bus_conf.c +++ b/src/mainboard/siemens/sitemp_g1p1/get_bus_conf.c @@ -23,7 +23,7 @@ #include <string.h> #include <stdint.h> #include <stdlib.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -107,7 +107,7 @@ void get_bus_conf(void) } /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/siemens/sitemp_g1p1/mainboard.c b/src/mainboard/siemens/sitemp_g1p1/mainboard.c index 76397abb7d..0d7b8da741 100644 --- a/src/mainboard/siemens/sitemp_g1p1/mainboard.c +++ b/src/mainboard/siemens/sitemp_g1p1/mainboard.c @@ -816,14 +816,14 @@ static void smm_lock( void ) static void init(device_t dev) { -#if CONFIG_PCI_OPTION_ROM_RUN_YABEL == 0 +#if !CONFIG_PCI_OPTION_ROM_RUN_YABEL INT15_function_extensions int15_func; #endif printk(BIOS_DEBUG, "%s %s[%x/%x] %s\n", dev->chip_ops->name, dev_path(dev), dev->subsystem_vendor, dev->subsystem_device, __func__); -#if CONFIG_PCI_OPTION_ROM_RUN_YABEL == 0 +#if !CONFIG_PCI_OPTION_ROM_RUN_YABEL if( get_option(&int15_func.regs.func00_LCD_panel_id, "lcd_panel_id") < 0 ) int15_func.regs.func00_LCD_panel_id = PANEL_TABLE_ID_NO; int15_func.regs.func05_TV_standard = TV_MODE_NO; @@ -853,7 +853,7 @@ static void enable_dev(device_t dev) detect_hw_variant(dev); update_subsystemid(dev); -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA { msr_t msr, msr2; @@ -921,7 +921,7 @@ int add_mainboard_resources(struct lb_memory *mem) /* UMA is removed from system memory in the northbridge code, but * in some circumstances we want the memory mentioned as reserved. */ -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA printk(BIOS_INFO, "uma_memory_base=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, uma_memory_size); diff --git a/src/mainboard/siemens/sitemp_g1p1/romstage.c b/src/mainboard/siemens/sitemp_g1p1/romstage.c index b570d4581d..0c61e5d3fc 100644 --- a/src/mainboard/siemens/sitemp_g1p1/romstage.c +++ b/src/mainboard/siemens/sitemp_g1p1/romstage.c @@ -258,7 +258,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS /* It is said that we should start core1 after all core0 launched */ wait_all_core0_started(); start_other_cores(); diff --git a/src/mainboard/sunw/ultra40/get_bus_conf.c b/src/mainboard/sunw/ultra40/get_bus_conf.c index bd57defb93..af4d6f0ade 100644 --- a/src/mainboard/sunw/ultra40/get_bus_conf.c +++ b/src/mainboard/sunw/ultra40/get_bus_conf.c @@ -3,7 +3,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif #include <stdlib.h> @@ -254,7 +254,7 @@ void get_bus_conf(void) /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(4); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/sunw/ultra40/romstage.c b/src/mainboard/sunw/ultra40/romstage.c index 0bc8de2f18..1f0a39542b 100644 --- a/src/mainboard/sunw/ultra40/romstage.c +++ b/src/mainboard/sunw/ultra40/romstage.c @@ -129,7 +129,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) needs_reset = setup_coherent_ht_domain(); wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched start_other_cores(); wait_all_other_cores_started(bsp_apicid); diff --git a/src/mainboard/supermicro/h8dme/get_bus_conf.c b/src/mainboard/supermicro/h8dme/get_bus_conf.c index 42c4c46e7f..53dcd7206d 100644 --- a/src/mainboard/supermicro/h8dme/get_bus_conf.c +++ b/src/mainboard/supermicro/h8dme/get_bus_conf.c @@ -24,7 +24,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -141,7 +141,7 @@ void get_bus_conf(void) /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/supermicro/h8dme/romstage.c b/src/mainboard/supermicro/h8dme/romstage.c index 2cdc4c943e..989f2d8872 100644 --- a/src/mainboard/supermicro/h8dme/romstage.c +++ b/src/mainboard/supermicro/h8dme/romstage.c @@ -16,7 +16,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#if CONFIG_K8_REV_F_SUPPORT == 1 +#if CONFIG_K8_REV_F_SUPPORT #define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 #endif @@ -217,7 +217,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_coherent_ht_domain(); // routing table and start other core0 wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, * So here need to make sure last core0 is started, esp for two way system, diff --git a/src/mainboard/supermicro/h8dmr/get_bus_conf.c b/src/mainboard/supermicro/h8dmr/get_bus_conf.c index 42c4c46e7f..53dcd7206d 100644 --- a/src/mainboard/supermicro/h8dmr/get_bus_conf.c +++ b/src/mainboard/supermicro/h8dmr/get_bus_conf.c @@ -24,7 +24,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -141,7 +141,7 @@ void get_bus_conf(void) /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/supermicro/h8dmr/romstage.c b/src/mainboard/supermicro/h8dmr/romstage.c index 38aef5ea4f..cdef306dbc 100644 --- a/src/mainboard/supermicro/h8dmr/romstage.c +++ b/src/mainboard/supermicro/h8dmr/romstage.c @@ -19,7 +19,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#if CONFIG_K8_REV_F_SUPPORT == 1 +#if CONFIG_K8_REV_F_SUPPORT #define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 #endif @@ -143,7 +143,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_coherent_ht_domain(); // routing table and start other core0 wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, * So here need to make sure last core0 is started, esp for two way system, diff --git a/src/mainboard/supermicro/h8dmr_fam10/get_bus_conf.c b/src/mainboard/supermicro/h8dmr_fam10/get_bus_conf.c index 07350e3f77..0cb580cd3d 100644 --- a/src/mainboard/supermicro/h8dmr_fam10/get_bus_conf.c +++ b/src/mainboard/supermicro/h8dmr_fam10/get_bus_conf.c @@ -24,7 +24,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -115,7 +115,7 @@ void get_bus_conf(void) } /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/supermicro/h8dmr_fam10/romstage.c b/src/mainboard/supermicro/h8dmr_fam10/romstage.c index 4e243c284e..ddd0920e77 100644 --- a/src/mainboard/supermicro/h8dmr_fam10/romstage.c +++ b/src/mainboard/supermicro/h8dmr_fam10/romstage.c @@ -174,7 +174,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(); diff --git a/src/mainboard/supermicro/h8qgi/buildOpts.c b/src/mainboard/supermicro/h8qgi/buildOpts.c index 5837349692..d73e8ad3b0 100644 --- a/src/mainboard/supermicro/h8qgi/buildOpts.c +++ b/src/mainboard/supermicro/h8qgi/buildOpts.c @@ -202,7 +202,7 @@ CONST MANUAL_BUID_SWAP_LIST ROMDATA h8qgi_manual_swaplist[2] = } }; -#if CONFIG_HT3_SUPPORT == 1 +#if CONFIG_HT3_SUPPORT /** * The socket and link match values are platform specific * @@ -439,10 +439,10 @@ CONST AP_MTRR_SETTINGS ROMDATA h8qgi_ap_mtrr_list[] = #define AGESA_ENTRY_INIT_GENERAL_SERVICES TRUE /* -#if (CONFIG_CPU_AMD_AGESA_FAMILY15 == 1) +#if CONFIG_CPU_AMD_AGESA_FAMILY15 #define BLDOPT_REMOVE_FAMILY_10_SUPPORT TRUE #endif -#if (CONFIG_CPU_AMD_AGESA_FAMILY10 == 1) +#if CONFIG_CPU_AMD_AGESA_FAMILY10 #define BLDOPT_REMOVE_FAMILY_15_SUPPORT TRUE #endif */ diff --git a/src/mainboard/supermicro/h8qgi/mainboard.c b/src/mainboard/supermicro/h8qgi/mainboard.c index 675c87fa3b..f6d437eab2 100644 --- a/src/mainboard/supermicro/h8qgi/mainboard.c +++ b/src/mainboard/supermicro/h8qgi/mainboard.c @@ -72,7 +72,7 @@ static void h8qgi_enable(device_t dev) printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); } -#if (CONFIG_HAVE_MAINBOARD_RESOURCES == 1) +#if CONFIG_HAVE_MAINBOARD_RESOURCES int add_mainboard_resources(struct lb_memory *mem) { return 0; diff --git a/src/mainboard/supermicro/h8qgi/rd890_cfg.h b/src/mainboard/supermicro/h8qgi/rd890_cfg.h index 8f45019783..3ba25d5006 100644 --- a/src/mainboard/supermicro/h8qgi/rd890_cfg.h +++ b/src/mainboard/supermicro/h8qgi/rd890_cfg.h @@ -31,10 +31,10 @@ * [12..15] - Sublink (1..2), If NB connected to full link than Sublink should be set to 0. */ #ifndef DEFAULT_HT_PATH -#if CONFIG_CPU_AMD_AGESA_FAMILY10 == 1 +#if CONFIG_CPU_AMD_AGESA_FAMILY10 #define DEFAULT_HT_PATH {0x0, 0x3} #endif -#if CONFIG_CPU_AMD_AGESA_FAMILY15 == 1 +#if CONFIG_CPU_AMD_AGESA_FAMILY15 #define DEFAULT_HT_PATH {0x0, 0x1} #endif #endif diff --git a/src/mainboard/supermicro/h8qgi/sb700_cfg.h b/src/mainboard/supermicro/h8qgi/sb700_cfg.h index aac61ec464..42cd3635a1 100644 --- a/src/mainboard/supermicro/h8qgi/sb700_cfg.h +++ b/src/mainboard/supermicro/h8qgi/sb700_cfg.h @@ -40,7 +40,7 @@ * before AGESA module get call. */ #ifndef BIOS_SIZE -#if CONFIG_COREBOOT_ROMSIZE_KB_1024 == 1 +#if CONFIG_COREBOOT_ROMSIZE_KB_1024 #define BIOS_SIZE BIOS_SIZE_1M #elif CONFIG_COREBOOT_ROMSIZE_KB_2048 == 1 #define BIOS_SIZE BIOS_SIZE_2M diff --git a/src/mainboard/supermicro/h8qme_fam10/get_bus_conf.c b/src/mainboard/supermicro/h8qme_fam10/get_bus_conf.c index f03fb64e81..a92bf424ae 100644 --- a/src/mainboard/supermicro/h8qme_fam10/get_bus_conf.c +++ b/src/mainboard/supermicro/h8qme_fam10/get_bus_conf.c @@ -24,7 +24,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -132,7 +132,7 @@ void get_bus_conf(void) m->bus_8132_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(3); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/supermicro/h8qme_fam10/romstage.c b/src/mainboard/supermicro/h8qme_fam10/romstage.c index d9d5218bb8..2f5be994c8 100644 --- a/src/mainboard/supermicro/h8qme_fam10/romstage.c +++ b/src/mainboard/supermicro/h8qme_fam10/romstage.c @@ -226,7 +226,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(); diff --git a/src/mainboard/supermicro/h8scm_fam10/get_bus_conf.c b/src/mainboard/supermicro/h8scm_fam10/get_bus_conf.c index 6a1fd7769f..fe5fcde226 100644 --- a/src/mainboard/supermicro/h8scm_fam10/get_bus_conf.c +++ b/src/mainboard/supermicro/h8scm_fam10/get_bus_conf.c @@ -23,7 +23,7 @@ #include <string.h> #include <stdint.h> #include <stdlib.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -128,7 +128,7 @@ void get_bus_conf(void) /* I/O APICs: APIC ID Version State Address */ bus_isa = 10; -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/supermicro/h8scm_fam10/mainboard.c b/src/mainboard/supermicro/h8scm_fam10/mainboard.c index 90b53357ad..d0fb54145d 100644 --- a/src/mainboard/supermicro/h8scm_fam10/mainboard.c +++ b/src/mainboard/supermicro/h8scm_fam10/mainboard.c @@ -97,7 +97,7 @@ static void h8scm_enable(device_t dev) /* get_ide_dma66(); */ } -#if (CONFIG_HAVE_MAINBOARD_RESOURCES == 1) +#if CONFIG_HAVE_MAINBOARD_RESOURCES int add_mainboard_resources(struct lb_memory *mem) { return 0; diff --git a/src/mainboard/supermicro/h8scm_fam10/mptable.c b/src/mainboard/supermicro/h8scm_fam10/mptable.c index 0c75d1a15b..2e50b84950 100644 --- a/src/mainboard/supermicro/h8scm_fam10/mptable.c +++ b/src/mainboard/supermicro/h8scm_fam10/mptable.c @@ -110,7 +110,7 @@ static void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_GENERATE_ACPI_TABLES == 0 +#if !CONFIG_GENERATE_ACPI_TABLES #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sp5100, (pin)) #else diff --git a/src/mainboard/supermicro/h8scm_fam10/romstage.c b/src/mainboard/supermicro/h8scm_fam10/romstage.c index 70b3a0470d..6ad1484462 100644 --- a/src/mainboard/supermicro/h8scm_fam10/romstage.c +++ b/src/mainboard/supermicro/h8scm_fam10/romstage.c @@ -172,7 +172,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(); diff --git a/src/mainboard/technexion/tim5690/get_bus_conf.c b/src/mainboard/technexion/tim5690/get_bus_conf.c index 2b0fca7abf..d4152a1314 100644 --- a/src/mainboard/technexion/tim5690/get_bus_conf.c +++ b/src/mainboard/technexion/tim5690/get_bus_conf.c @@ -23,7 +23,7 @@ #include <string.h> #include <stdint.h> #include <stdlib.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -107,7 +107,7 @@ void get_bus_conf(void) } /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/technexion/tim5690/mainboard.c b/src/mainboard/technexion/tim5690/mainboard.c index 924d09e55f..635023079b 100644 --- a/src/mainboard/technexion/tim5690/mainboard.c +++ b/src/mainboard/technexion/tim5690/mainboard.c @@ -241,7 +241,7 @@ static void tim5690_enable(device_t dev) vbios_regs.int15_regs.fun05_tv_standard = TV_MODE_NO; vgabios_init(&vbios_regs); -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA msr_t msr, msr2; /* TOP_MEM: the top of DRAM below 4G */ @@ -290,7 +290,7 @@ int add_mainboard_resources(struct lb_memory *mem) /* UMA is removed from system memory in the northbridge code, but * in some circumstances we want the memory mentioned as reserved. */ -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA printk(BIOS_INFO, "uma_memory_base=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, diff --git a/src/mainboard/technexion/tim5690/mptable.c b/src/mainboard/technexion/tim5690/mptable.c index 4ffba6f310..bb3232a1cf 100644 --- a/src/mainboard/technexion/tim5690/mptable.c +++ b/src/mainboard/technexion/tim5690/mptable.c @@ -99,7 +99,7 @@ static void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_GENERATE_ACPI_TABLES == 0 +#if !CONFIG_GENERATE_ACPI_TABLES #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb600, (pin)) #else diff --git a/src/mainboard/technexion/tim5690/romstage.c b/src/mainboard/technexion/tim5690/romstage.c index 5934938097..c24e89154f 100644 --- a/src/mainboard/technexion/tim5690/romstage.c +++ b/src/mainboard/technexion/tim5690/romstage.c @@ -108,7 +108,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS /* It is said that we should start core1 after all core0 launched */ wait_all_core0_started(); start_other_cores(); diff --git a/src/mainboard/technexion/tim8690/get_bus_conf.c b/src/mainboard/technexion/tim8690/get_bus_conf.c index 2b0fca7abf..d4152a1314 100644 --- a/src/mainboard/technexion/tim8690/get_bus_conf.c +++ b/src/mainboard/technexion/tim8690/get_bus_conf.c @@ -23,7 +23,7 @@ #include <string.h> #include <stdint.h> #include <stdlib.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -107,7 +107,7 @@ void get_bus_conf(void) } /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/technexion/tim8690/mainboard.c b/src/mainboard/technexion/tim8690/mainboard.c index 664372d879..18abbc930d 100644 --- a/src/mainboard/technexion/tim8690/mainboard.c +++ b/src/mainboard/technexion/tim8690/mainboard.c @@ -147,7 +147,7 @@ static void tim8690_enable(device_t dev) { printk(BIOS_INFO, "Mainboard tim8690 Enable. dev=0x%p\n", dev); -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA msr_t msr, msr2; /* TOP_MEM: the top of DRAM below 4G */ @@ -197,7 +197,7 @@ int add_mainboard_resources(struct lb_memory *mem) /* UMA is removed from system memory in the northbridge code, but * in some circumstances we want the memory mentioned as reserved. */ -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA printk(BIOS_INFO, "uma_memory_base=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, diff --git a/src/mainboard/technexion/tim8690/mptable.c b/src/mainboard/technexion/tim8690/mptable.c index 4ffba6f310..bb3232a1cf 100644 --- a/src/mainboard/technexion/tim8690/mptable.c +++ b/src/mainboard/technexion/tim8690/mptable.c @@ -99,7 +99,7 @@ static void *smp_write_config_table(void *v) /* PCI interrupts are level triggered, and are * associated with a specific bus/device/function tuple. */ -#if CONFIG_GENERATE_ACPI_TABLES == 0 +#if !CONFIG_GENERATE_ACPI_TABLES #define PCI_INT(bus, dev, fn, pin) \ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb600, (pin)) #else diff --git a/src/mainboard/technexion/tim8690/romstage.c b/src/mainboard/technexion/tim8690/romstage.c index 97bc4e1ddd..875321e519 100644 --- a/src/mainboard/technexion/tim8690/romstage.c +++ b/src/mainboard/technexion/tim8690/romstage.c @@ -103,7 +103,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS /* It is said that we should start core1 after all core0 launched */ wait_all_core0_started(); start_other_cores(); diff --git a/src/mainboard/tyan/s2850/mptable.c b/src/mainboard/tyan/s2850/mptable.c index 08027f4a72..371d9a3ced 100644 --- a/src/mainboard/tyan/s2850/mptable.c +++ b/src/mainboard/tyan/s2850/mptable.c @@ -4,7 +4,7 @@ #include <device/pci.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -80,7 +80,7 @@ static void *smp_write_config_table(void *v) mptable_write_buses(mc, NULL, &bus_isa); /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/tyan/s2850/romstage.c b/src/mainboard/tyan/s2850/romstage.c index e990f4ecf3..567b4f1ec4 100644 --- a/src/mainboard/tyan/s2850/romstage.c +++ b/src/mainboard/tyan/s2850/romstage.c @@ -89,7 +89,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) needs_reset = setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched start_other_cores(); #endif diff --git a/src/mainboard/tyan/s2875/mptable.c b/src/mainboard/tyan/s2875/mptable.c index c3765f2da1..90299a746b 100644 --- a/src/mainboard/tyan/s2875/mptable.c +++ b/src/mainboard/tyan/s2875/mptable.c @@ -4,7 +4,7 @@ #include <device/pci.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -98,7 +98,7 @@ static void *smp_write_config_table(void *v) mptable_write_buses(mc, NULL, &bus_isa); /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/tyan/s2875/romstage.c b/src/mainboard/tyan/s2875/romstage.c index 832255c684..4b52cd37b6 100644 --- a/src/mainboard/tyan/s2875/romstage.c +++ b/src/mainboard/tyan/s2875/romstage.c @@ -98,7 +98,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) needs_reset = setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched start_other_cores(); #endif diff --git a/src/mainboard/tyan/s2880/mptable.c b/src/mainboard/tyan/s2880/mptable.c index 2d34c8ba9d..32fc639dab 100644 --- a/src/mainboard/tyan/s2880/mptable.c +++ b/src/mainboard/tyan/s2880/mptable.c @@ -4,7 +4,7 @@ #include <device/pci.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -109,7 +109,7 @@ static void *smp_write_config_table(void *v) mptable_write_buses(mc, NULL, &bus_isa); /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(3); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/tyan/s2880/romstage.c b/src/mainboard/tyan/s2880/romstage.c index 6bdb3d02c9..6dc62af519 100644 --- a/src/mainboard/tyan/s2880/romstage.c +++ b/src/mainboard/tyan/s2880/romstage.c @@ -98,7 +98,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) needs_reset = setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched start_other_cores(); #endif diff --git a/src/mainboard/tyan/s2881/get_bus_conf.c b/src/mainboard/tyan/s2881/get_bus_conf.c index e4721ce42e..c7b62c768d 100644 --- a/src/mainboard/tyan/s2881/get_bus_conf.c +++ b/src/mainboard/tyan/s2881/get_bus_conf.c @@ -3,7 +3,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -106,7 +106,7 @@ void get_bus_conf(void) /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(3); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/tyan/s2881/romstage.c b/src/mainboard/tyan/s2881/romstage.c index bba4c7e5d8..07ac12b6d0 100644 --- a/src/mainboard/tyan/s2881/romstage.c +++ b/src/mainboard/tyan/s2881/romstage.c @@ -92,7 +92,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) needs_reset = setup_coherent_ht_domain(); wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched start_other_cores(); wait_all_other_cores_started(bsp_apicid); diff --git a/src/mainboard/tyan/s2882/mptable.c b/src/mainboard/tyan/s2882/mptable.c index 47c39a763a..6c0796525f 100644 --- a/src/mainboard/tyan/s2882/mptable.c +++ b/src/mainboard/tyan/s2882/mptable.c @@ -5,7 +5,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -107,7 +107,7 @@ static void *smp_write_config_table(void *v) mptable_write_buses(mc, NULL, &bus_isa); /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(3); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/tyan/s2882/romstage.c b/src/mainboard/tyan/s2882/romstage.c index 6bdb3d02c9..6dc62af519 100644 --- a/src/mainboard/tyan/s2882/romstage.c +++ b/src/mainboard/tyan/s2882/romstage.c @@ -98,7 +98,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) needs_reset = setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched start_other_cores(); #endif diff --git a/src/mainboard/tyan/s2885/get_bus_conf.c b/src/mainboard/tyan/s2885/get_bus_conf.c index 5cb760da2f..e390f7c106 100644 --- a/src/mainboard/tyan/s2885/get_bus_conf.c +++ b/src/mainboard/tyan/s2885/get_bus_conf.c @@ -3,7 +3,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -119,7 +119,7 @@ void get_bus_conf(void) } /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(3); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/tyan/s2885/romstage.c b/src/mainboard/tyan/s2885/romstage.c index d6552ac991..5aede1c718 100644 --- a/src/mainboard/tyan/s2885/romstage.c +++ b/src/mainboard/tyan/s2885/romstage.c @@ -92,7 +92,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) needs_reset = setup_coherent_ht_domain(); wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched start_other_cores(); wait_all_other_cores_started(bsp_apicid); diff --git a/src/mainboard/tyan/s2891/get_bus_conf.c b/src/mainboard/tyan/s2891/get_bus_conf.c index bbb02e9f98..6be68adbec 100644 --- a/src/mainboard/tyan/s2891/get_bus_conf.c +++ b/src/mainboard/tyan/s2891/get_bus_conf.c @@ -3,7 +3,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -153,7 +153,7 @@ void get_bus_conf(void) /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(3); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/tyan/s2891/romstage.c b/src/mainboard/tyan/s2891/romstage.c index 8cdeb85494..09364819a0 100644 --- a/src/mainboard/tyan/s2891/romstage.c +++ b/src/mainboard/tyan/s2891/romstage.c @@ -113,7 +113,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) needs_reset = setup_coherent_ht_domain(); wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched start_other_cores(); wait_all_other_cores_started(bsp_apicid); diff --git a/src/mainboard/tyan/s2892/get_bus_conf.c b/src/mainboard/tyan/s2892/get_bus_conf.c index 3a45cfa158..174632fa44 100644 --- a/src/mainboard/tyan/s2892/get_bus_conf.c +++ b/src/mainboard/tyan/s2892/get_bus_conf.c @@ -3,7 +3,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -146,7 +146,7 @@ void get_bus_conf(void) /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(3); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/tyan/s2892/romstage.c b/src/mainboard/tyan/s2892/romstage.c index 2b2d6fa5d5..9124b993c7 100644 --- a/src/mainboard/tyan/s2892/romstage.c +++ b/src/mainboard/tyan/s2892/romstage.c @@ -104,7 +104,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) needs_reset = setup_coherent_ht_domain(); wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched start_other_cores(); wait_all_other_cores_started(bsp_apicid); diff --git a/src/mainboard/tyan/s2895/get_bus_conf.c b/src/mainboard/tyan/s2895/get_bus_conf.c index 9de16291fd..abd6297b48 100644 --- a/src/mainboard/tyan/s2895/get_bus_conf.c +++ b/src/mainboard/tyan/s2895/get_bus_conf.c @@ -3,7 +3,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -157,7 +157,7 @@ void get_bus_conf(void) /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(4); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/tyan/s2912/get_bus_conf.c b/src/mainboard/tyan/s2912/get_bus_conf.c index d16f4e6d40..d8073587e8 100644 --- a/src/mainboard/tyan/s2912/get_bus_conf.c +++ b/src/mainboard/tyan/s2912/get_bus_conf.c @@ -24,7 +24,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif #include <cpu/amd/amdk8_sysconf.h> @@ -112,7 +112,7 @@ void get_bus_conf(void) } /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/tyan/s2912/romstage.c b/src/mainboard/tyan/s2912/romstage.c index 67ce286304..b79806873e 100644 --- a/src/mainboard/tyan/s2912/romstage.c +++ b/src/mainboard/tyan/s2912/romstage.c @@ -19,7 +19,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#if CONFIG_K8_REV_F_SUPPORT == 1 +#if CONFIG_K8_REV_F_SUPPORT #define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 #endif @@ -146,7 +146,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_coherent_ht_domain(); // routing table and start other core0 wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, * So here need to make sure last core0 is started, esp for two way system, diff --git a/src/mainboard/tyan/s2912_fam10/get_bus_conf.c b/src/mainboard/tyan/s2912_fam10/get_bus_conf.c index da0ed54653..41379083db 100644 --- a/src/mainboard/tyan/s2912_fam10/get_bus_conf.c +++ b/src/mainboard/tyan/s2912_fam10/get_bus_conf.c @@ -24,7 +24,7 @@ #include <device/pci_ids.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -114,7 +114,7 @@ void get_bus_conf(void) } /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(1); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/tyan/s2912_fam10/romstage.c b/src/mainboard/tyan/s2912_fam10/romstage.c index df571a0d13..c3017e5943 100644 --- a/src/mainboard/tyan/s2912_fam10/romstage.c +++ b/src/mainboard/tyan/s2912_fam10/romstage.c @@ -175,7 +175,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(); diff --git a/src/mainboard/tyan/s4880/mptable.c b/src/mainboard/tyan/s4880/mptable.c index 9111a6377b..dcc0fd871c 100644 --- a/src/mainboard/tyan/s4880/mptable.c +++ b/src/mainboard/tyan/s4880/mptable.c @@ -4,7 +4,7 @@ #include <device/pci.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -109,7 +109,7 @@ static void *smp_write_config_table(void *v) mptable_write_buses(mc, NULL, &bus_isa); /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(3); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/tyan/s4880/romstage.c b/src/mainboard/tyan/s4880/romstage.c index 9348f39bd7..c6976706e1 100644 --- a/src/mainboard/tyan/s4880/romstage.c +++ b/src/mainboard/tyan/s4880/romstage.c @@ -145,7 +145,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) needs_reset = setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched start_other_cores(); #endif diff --git a/src/mainboard/tyan/s4882/mptable.c b/src/mainboard/tyan/s4882/mptable.c index bca26a056f..350b55ca04 100644 --- a/src/mainboard/tyan/s4882/mptable.c +++ b/src/mainboard/tyan/s4882/mptable.c @@ -4,7 +4,7 @@ #include <device/pci.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #endif @@ -109,7 +109,7 @@ static void *smp_write_config_table(void *v) mptable_write_buses(mc, NULL, &bus_isa); /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS apicid_base = get_apicid_base(3); #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; diff --git a/src/mainboard/tyan/s4882/romstage.c b/src/mainboard/tyan/s4882/romstage.c index c916e4ca65..56b6325ab0 100644 --- a/src/mainboard/tyan/s4882/romstage.c +++ b/src/mainboard/tyan/s4882/romstage.c @@ -125,7 +125,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) needs_reset = setup_coherent_ht_domain(); wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS // It is said that we should start core1 after all core0 launched start_other_cores(); wait_all_other_cores_started(bsp_apicid); diff --git a/src/mainboard/via/epia-n/mainboard.c b/src/mainboard/via/epia-n/mainboard.c index 6e11a0087a..cf5ae968a9 100644 --- a/src/mainboard/via/epia-n/mainboard.c +++ b/src/mainboard/via/epia-n/mainboard.c @@ -30,7 +30,7 @@ int add_mainboard_resources(struct lb_memory *mem) { -#if CONFIG_IOAPIC == 1 +#if CONFIG_IOAPIC lb_add_memory_range(mem, LB_MEM_RESERVED, IO_APIC_ADDR, 0x1000); lb_add_memory_range(mem, LB_MEM_RESERVED, diff --git a/src/northbridge/amd/agesa/family10/northbridge.c b/src/northbridge/amd/agesa/family10/northbridge.c index ee02f0d87a..7b73987e40 100644 --- a/src/northbridge/amd/agesa/family10/northbridge.c +++ b/src/northbridge/amd/agesa/family10/northbridge.c @@ -31,7 +31,7 @@ #include <cpu/x86/lapic.h> #include <cbmem.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <pc80/mc146818rtc.h> #endif @@ -70,7 +70,7 @@ static dram_base_mask_t get_dram_base_mask(u32 nodeid) dram_base_mask_t d; dev = __f1_dev[0]; -#if CONFIG_EXT_CONF_SUPPORT == 1 +#if CONFIG_EXT_CONF_SUPPORT /* I will use ext space only for simple */ pci_write_config32(dev, 0x110, nodeid | (1<<28)); // [47:27] at [28:8] d.mask = pci_read_config32(dev, 0x114); // enable is bit 0 @@ -551,7 +551,7 @@ static void amdfam10_link_read_bases(device_t dev, u32 nodeid, u32 link) resource = amdfam10_find_iopair(dev, nodeid, link); if (resource) { u32 align; -#if CONFIG_EXT_CONF_SUPPORT == 1 +#if CONFIG_EXT_CONF_SUPPORT if((resource->index & 0x1fff) == 0x1110) { // ext align = 8; } @@ -577,7 +577,7 @@ static void amdfam10_link_read_bases(device_t dev, u32 nodeid, u32 link) resource->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; resource->flags |= IORESOURCE_BRIDGE; -#if CONFIG_EXT_CONF_SUPPORT == 1 +#if CONFIG_EXT_CONF_SUPPORT if ((resource->index & 0x1fff) == 0x1110) { // ext normalize_resource(resource); } @@ -594,7 +594,7 @@ static void amdfam10_link_read_bases(device_t dev, u32 nodeid, u32 link) resource->gran = log2(HT_MEM_HOST_ALIGN); resource->limit = 0xffffffffffULL; resource->flags = IORESOURCE_MEM | IORESOURCE_BRIDGE; -#if CONFIG_EXT_CONF_SUPPORT == 1 +#if CONFIG_EXT_CONF_SUPPORT if ((resource->index & 0x1fff) == 0x1110) { // ext normalize_resource(resource); } @@ -677,7 +677,7 @@ static void amdfam10_create_vga_resource(device_t dev, unsigned nodeid) * we only deal with the 'first' vga card */ for (link = dev->link_list; link; link = link->next) { if (link->bridge_ctrl & PCI_BRIDGE_CTL_VGA) { -#if CONFIG_MULTIPLE_VGA_ADAPTERS == 1 +#if CONFIG_MULTIPLE_VGA_ADAPTERS extern device_t vga_pri; // the primary vga device, defined in device.c printk(BIOS_DEBUG, "VGA: vga_pri bus num = %d bus range [%d,%d]\n", vga_pri->bus->secondary, link->secondary,link->subordinate); @@ -806,7 +806,7 @@ static void amdfam10_domain_read_resources(device_t dev) /* FIXME: do we need to check extend conf space? I don't believe that much preset value */ -#if CONFIG_PCI_64BIT_PREF_MEM == 0 +#if !CONFIG_PCI_64BIT_PREF_MEM pci_domain_read_resources(dev); #else struct bus *link; @@ -908,7 +908,7 @@ static struct hw_mem_hole_info get_hw_mem_hole_info(void) } #endif -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA extern uint64_t uma_memory_base, uma_memory_size; static void add_uma_resource(struct device *dev, int index) @@ -926,7 +926,7 @@ static void add_uma_resource(struct device *dev, int index) static void amdfam10_domain_set_resources(device_t dev) { -#if CONFIG_PCI_64BIT_PREF_MEM == 1 +#if CONFIG_PCI_64BIT_PREF_MEM struct resource *io, *mem1, *mem2; struct resource *res; #endif @@ -939,7 +939,7 @@ static void amdfam10_domain_set_resources(device_t dev) u32 reset_memhole = 1; #endif -#if CONFIG_PCI_64BIT_PREF_MEM == 1 +#if CONFIG_PCI_64BIT_PREF_MEM for (link = dev->link_list; link; link = link->next) { /* Now reallocate the pci resources memory with the @@ -1054,10 +1054,10 @@ static void amdfam10_domain_set_resources(device_t dev) ram_resource(dev, (idx | i), basek, pre_sizek); idx += 0x10; sizek -= pre_sizek; -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES if (high_tables_base==0) { /* Leave some space for ACPI, PIRQ and MP tables */ -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA high_tables_base = uma_memory_base - HIGH_MEMORY_SIZE; #else high_tables_base = (mmio_basek * 1024) - HIGH_MEMORY_SIZE; @@ -1079,19 +1079,19 @@ static void amdfam10_domain_set_resources(device_t dev) } } -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA /* Deduct uma memory before reporting because * this is what the mtrr code expects */ sizek -= uma_memory_size / 1024; #endif ram_resource(dev, (idx | i), basek, sizek); idx += 0x10; -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES printk(BIOS_DEBUG, "node %d: mmio_basek=%08lx, basek=%08llx, limitk=%08llx\n", i, mmio_basek, basek, limitk); if (high_tables_base==0) { /* Leave some space for ACPI, PIRQ and MP tables */ -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA high_tables_base = uma_memory_base - HIGH_MEMORY_SIZE; #else high_tables_base = (limitk * 1024) - HIGH_MEMORY_SIZE; @@ -1101,7 +1101,7 @@ static void amdfam10_domain_set_resources(device_t dev) #endif } -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA add_uma_resource(dev, 7); #endif @@ -1121,7 +1121,7 @@ static u32 amdfam10_domain_scan_bus(device_t dev, u32 max) for (reg = 0xe0; reg <= 0xec; reg += 4) { f1_write_config32(reg, 0); } -#if CONFIG_EXT_CONF_SUPPORT == 1 +#if CONFIG_EXT_CONF_SUPPORT // all nodes for (i = 0; i< sysconf.nodes; i++) { int index; @@ -1270,7 +1270,7 @@ static u32 cpu_bus_scan(device_t dev, u32 max) } disable_siblings = !CONFIG_LOGICAL_CPUS; -#if CONFIG_LOGICAL_CPUS == 1 +#if CONFIG_LOGICAL_CPUS get_option(&disable_siblings, "multi_core"); #endif @@ -1376,7 +1376,7 @@ static u32 cpu_bus_scan(device_t dev, u32 max) * otherwise the device under it will not be scanned */ int linknum; -#if CONFIG_HT3_SUPPORT==1 +#if CONFIG_HT3_SUPPORT linknum = 8; #else linknum = 4; diff --git a/src/northbridge/amd/agesa/family12/northbridge.c b/src/northbridge/amd/agesa/family12/northbridge.c index a3afecb217..efc0a489d8 100644 --- a/src/northbridge/amd/agesa/family12/northbridge.c +++ b/src/northbridge/amd/agesa/family12/northbridge.c @@ -222,7 +222,7 @@ static void amdfam12_link_read_bases(device_t dev, u32 nodeid, u32 link) resource = amdfam12_find_iopair(dev, nodeid, link); if (resource) { u32 align; -#if CONFIG_EXT_CONF_SUPPORT == 1 +#if CONFIG_EXT_CONF_SUPPORT if((resource->index & 0x1fff) == 0x1110) { // ext align = 8; } @@ -248,7 +248,7 @@ static void amdfam12_link_read_bases(device_t dev, u32 nodeid, u32 link) resource->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; resource->flags |= IORESOURCE_BRIDGE; -#if CONFIG_EXT_CONF_SUPPORT == 1 +#if CONFIG_EXT_CONF_SUPPORT if((resource->index & 0x1fff) == 0x1110) { // ext normalize_resource(resource); } @@ -265,7 +265,7 @@ static void amdfam12_link_read_bases(device_t dev, u32 nodeid, u32 link) resource->gran = log2(HT_MEM_HOST_ALIGN); resource->limit = 0xffffffffffULL; resource->flags = IORESOURCE_MEM | IORESOURCE_BRIDGE; -#if CONFIG_EXT_CONF_SUPPORT == 1 +#if CONFIG_EXT_CONF_SUPPORT if((resource->index & 0x1fff) == 0x1110) { // ext normalize_resource(resource); } @@ -338,7 +338,7 @@ static struct hw_mem_hole_info get_hw_mem_hole_info(void) } #endif -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA extern uint64_t uma_memory_base, uma_memory_size; static void add_uma_resource(struct device *dev, int index) @@ -525,7 +525,7 @@ static void domain_read_resources(device_t dev) /* FIXME: do we need to check extend conf space? I don't believe that much preset value */ -#if CONFIG_PCI_64BIT_PREF_MEM == 0 +#if !CONFIG_PCI_64BIT_PREF_MEM //- pci_domain_read_resources(dev); struct resource *resource; @@ -574,7 +574,7 @@ static void domain_set_resources(device_t dev) printk(BIOS_DEBUG, " amsr - incoming dev = %08lx\n",dev); -#if CONFIG_PCI_64BIT_PREF_MEM == 1 +#if CONFIG_PCI_64BIT_PREF_MEM struct resource *io, *mem1, *mem2; struct resource *res; #endif @@ -587,7 +587,7 @@ static void domain_set_resources(device_t dev) u32 reset_memhole = 1; #endif -#if CONFIG_PCI_64BIT_PREF_MEM == 1 +#if CONFIG_PCI_64BIT_PREF_MEM printk(BIOS_DEBUG, "adsr - CONFIG_PCI_64BIT_PREF_MEM is true.\n"); for(link = dev->link_list; link; link = link->next) { @@ -711,10 +711,10 @@ printk(BIOS_DEBUG, "adsr: mmio_basek=%08x, basek=%08x, limitk=%08x\n", mmio_bas ram_resource(dev, idx, basek, pre_sizek); idx += 0x10; sizek -= pre_sizek; -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES if (high_tables_base==0) { /* Leave some space for ACPI, PIRQ and MP tables */ -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA high_tables_base = uma_memory_base - HIGH_MEMORY_SIZE; #else high_tables_base = (mmio_basek * 1024) - HIGH_MEMORY_SIZE; @@ -740,12 +740,12 @@ printk(BIOS_DEBUG, "adsr: mmio_basek=%08x, basek=%08x, limitk=%08x\n", mmio_bas ram_resource(dev, (idx | 0), basek, sizek); idx += 0x10; -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES printk(BIOS_DEBUG, "%d: mmio_basek=%08lx, basek=%08llx, limitk=%08llx\n", 0, mmio_basek, basek, limitk); if (high_tables_base==0) { /* Leave some space for ACPI, PIRQ and MP tables */ -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA high_tables_base = uma_memory_base - HIGH_MEMORY_SIZE; printk(BIOS_DEBUG, " adsr - uma_memory_base = %x.\n",uma_memory_base); #else @@ -758,7 +758,7 @@ printk(BIOS_DEBUG, "adsr: mmio_basek=%08x, basek=%08x, limitk=%08x\n", mmio_bas printk(BIOS_DEBUG, " adsr - mmio_basek = %x.\n",mmio_basek); printk(BIOS_DEBUG, " adsr - high_tables_size = %x.\n",high_tables_size); -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA printk(BIOS_DEBUG, "adsr - adding uma resource.\n"); add_uma_resource(dev, 7); #endif diff --git a/src/northbridge/amd/agesa/family14/northbridge.c b/src/northbridge/amd/agesa/family14/northbridge.c index 2647814389..f7c3b8e11f 100644 --- a/src/northbridge/amd/agesa/family14/northbridge.c +++ b/src/northbridge/amd/agesa/family14/northbridge.c @@ -210,7 +210,7 @@ static void amdfam14_link_read_bases(device_t dev, u32 nodeid, u32 link) resource = amdfam14_find_iopair(dev, nodeid, link); if (resource) { u32 align; -#if CONFIG_EXT_CONF_SUPPORT == 1 +#if CONFIG_EXT_CONF_SUPPORT if ((resource->index & 0x1fff) == 0x1110) { // ext align = 8; } else @@ -235,7 +235,7 @@ static void amdfam14_link_read_bases(device_t dev, u32 nodeid, u32 link) resource->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; resource->flags |= IORESOURCE_BRIDGE; -#if CONFIG_EXT_CONF_SUPPORT == 1 +#if CONFIG_EXT_CONF_SUPPORT if ((resource->index & 0x1fff) == 0x1110) { // ext normalize_resource(resource); } @@ -252,7 +252,7 @@ static void amdfam14_link_read_bases(device_t dev, u32 nodeid, u32 link) resource->gran = log2(HT_MEM_HOST_ALIGN); resource->limit = 0xffffffffffULL; resource->flags = IORESOURCE_MEM | IORESOURCE_BRIDGE; -#if CONFIG_EXT_CONF_SUPPORT == 1 +#if CONFIG_EXT_CONF_SUPPORT if ((resource->index & 0x1fff) == 0x1110) { // ext normalize_resource(resource); } @@ -326,7 +326,7 @@ static struct hw_mem_hole_info get_hw_mem_hole_info(void) } #endif -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA extern uint64_t uma_memory_base, uma_memory_size; static void add_uma_resource(struct device *dev, int index) @@ -508,7 +508,7 @@ static void domain_read_resources(device_t dev) /* FIXME: do we need to check extend conf space? I don't believe that much preset value */ -#if CONFIG_PCI_64BIT_PREF_MEM == 0 +#if !CONFIG_PCI_64BIT_PREF_MEM pci_domain_read_resources(dev); #else struct bus *link; @@ -538,7 +538,7 @@ static void domain_set_resources(device_t dev) printk(BIOS_DEBUG, "\nFam14h - domain_set_resources.\n"); printk(BIOS_DEBUG, " amsr - incoming dev = %08x\n", (u32) dev); -#if CONFIG_PCI_64BIT_PREF_MEM == 1 +#if CONFIG_PCI_64BIT_PREF_MEM struct resource *io, *mem1, *mem2; struct resource *res; #endif @@ -551,7 +551,7 @@ static void domain_set_resources(device_t dev) u32 reset_memhole = 1; #endif -#if CONFIG_PCI_64BIT_PREF_MEM == 1 +#if CONFIG_PCI_64BIT_PREF_MEM printk(BIOS_DEBUG, "adsr - CONFIG_PCI_64BIT_PREF_MEM is true.\n"); for (link = dev->link_list; link; link = link->next) { @@ -685,10 +685,10 @@ static void domain_set_resources(device_t dev) pre_sizek); idx += 0x10; sizek -= pre_sizek; -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES if (high_tables_base == 0) { /* Leave some space for ACPI, PIRQ and MP tables */ -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA high_tables_base = uma_memory_base - HIGH_MEMORY_SIZE; #else high_tables_base = (mmio_basek * 1024) - HIGH_MEMORY_SIZE; @@ -712,13 +712,13 @@ static void domain_set_resources(device_t dev) ram_resource(dev, (idx | 0), basek, sizek); idx += 0x10; -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES printk(BIOS_DEBUG, "%d: mmio_basek=%08lx, basek=%08llx, limitk=%08llx\n", 0, mmio_basek, basek, limitk); if (high_tables_base == 0) { /* Leave some space for ACPI, PIRQ and MP tables */ -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA high_tables_base = uma_memory_base - HIGH_MEMORY_SIZE; printk(BIOS_DEBUG, " adsr - uma_memory_base = %llx.\n", uma_memory_base); #else @@ -732,7 +732,7 @@ static void domain_set_resources(device_t dev) printk(BIOS_DEBUG, " adsr - high_tables_size = %llx.\n", high_tables_size); -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA printk(BIOS_DEBUG, "adsr - adding uma resource.\n"); add_uma_resource(dev, 7); #endif diff --git a/src/northbridge/amd/agesa/family15/northbridge.c b/src/northbridge/amd/agesa/family15/northbridge.c index d1a322ca6c..130086eb91 100644 --- a/src/northbridge/amd/agesa/family15/northbridge.c +++ b/src/northbridge/amd/agesa/family15/northbridge.c @@ -406,7 +406,7 @@ static void create_vga_resource(device_t dev, unsigned nodeid) * we only deal with the 'first' vga card */ for (link = dev->link_list; link; link = link->next) { if (link->bridge_ctrl & PCI_BRIDGE_CTL_VGA) { -#if CONFIG_MULTIPLE_VGA_ADAPTERS == 1 +#if CONFIG_MULTIPLE_VGA_ADAPTERS extern device_t vga_pri; // the primary vga device, defined in device.c printk(BIOS_DEBUG, "VGA: vga_pri bus num = %d bus range [%d,%d]\n", vga_pri->bus->secondary, link->secondary,link->subordinate); @@ -540,7 +540,7 @@ static void domain_read_resources(device_t dev) /* FIXME: do we need to check extend conf space? I don't believe that much preset value */ -#if CONFIG_PCI_64BIT_PREF_MEM == 0 +#if !CONFIG_PCI_64BIT_PREF_MEM pci_domain_read_resources(dev); @@ -626,7 +626,7 @@ static struct hw_mem_hole_info get_hw_mem_hole_info(void) } #endif -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA extern uint64_t uma_memory_base, uma_memory_size; static void add_uma_resource(struct device *dev, int index) { @@ -644,7 +644,7 @@ static void add_uma_resource(struct device *dev, int index) static void domain_set_resources(device_t dev) { -#if CONFIG_PCI_64BIT_PREF_MEM == 1 +#if CONFIG_PCI_64BIT_PREF_MEM struct resource *io, *mem1, *mem2; struct resource *res; #endif @@ -657,7 +657,7 @@ static void domain_set_resources(device_t dev) u32 reset_memhole = 1; #endif -#if CONFIG_PCI_64BIT_PREF_MEM == 1 +#if CONFIG_PCI_64BIT_PREF_MEM for (link = dev->link_list; link; link = link->next) { /* Now reallocate the pci resources memory with the @@ -773,10 +773,10 @@ static void domain_set_resources(device_t dev) ram_resource(dev, (idx | i), basek, pre_sizek); idx += 0x10; sizek -= pre_sizek; -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES if (high_tables_base==0) { /* Leave some space for ACPI, PIRQ and MP tables */ -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA high_tables_base = uma_memory_base - HIGH_MEMORY_SIZE; #else high_tables_base = (mmio_basek * 1024) - HIGH_MEMORY_SIZE; @@ -798,19 +798,19 @@ static void domain_set_resources(device_t dev) } } -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA /* Deduct uma memory before reporting because * this is what the mtrr code expects */ sizek -= uma_memory_size / 1024; #endif ram_resource(dev, (idx | i), basek, sizek); idx += 0x10; -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES printk(BIOS_DEBUG, "node %d: mmio_basek=%08lx, basek=%08llx, limitk=%08llx\n", i, mmio_basek, basek, limitk); if (high_tables_base==0) { /* Leave some space for ACPI, PIRQ and MP tables */ -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA high_tables_base = uma_memory_base - HIGH_MEMORY_SIZE; #else high_tables_base = (limitk * 1024) - HIGH_MEMORY_SIZE; @@ -820,7 +820,7 @@ static void domain_set_resources(device_t dev) #endif } -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA add_uma_resource(dev, 7); #endif @@ -1022,7 +1022,7 @@ static u32 cpu_bus_scan(device_t dev, u32 max) * otherwise the device under it will not be scanned */ int linknum; -#if CONFIG_HT3_SUPPORT==1 +#if CONFIG_HT3_SUPPORT linknum = 8; #else linknum = 4; diff --git a/src/northbridge/amd/amdfam10/amdfam10.h b/src/northbridge/amd/amdfam10/amdfam10.h index 99518065de..712c98638e 100644 --- a/src/northbridge/amd/amdfam10/amdfam10.h +++ b/src/northbridge/amd/amdfam10/amdfam10.h @@ -976,7 +976,7 @@ that are corresponding to 0x01, 0x02, 0x03, 0x05, 0x06, 0x07 #include "raminit.h" -#if CONFIG_AMDMCT == 0 +#if !CONFIG_AMDMCT //struct definitions @@ -1034,7 +1034,7 @@ struct nodes_info_t { } __attribute__((packed)); /* be careful with the alignment of sysinfo, bacause sysinfo may be shared by coreboot_car and coreboot_ram stage. and coreboot_ram may be running at 64bit later.*/ -#if CONFIG_AMDMCT == 0 +#if !CONFIG_AMDMCT //#define MEM_CS_COPY 1 #define MEM_CS_COPY NODE_NUMS @@ -1102,7 +1102,7 @@ struct sys_info { device_t get_node_pci(u32 nodeid, u32 fn); #endif -#if CONFIG_AMDMCT == 0 +#if !CONFIG_AMDMCT #ifdef __PRE_RAM__ static void soft_reset(void); diff --git a/src/northbridge/amd/amdfam10/conf.c b/src/northbridge/amd/amdfam10/conf.c index adfff0f6e3..d8c161fc3d 100644 --- a/src/northbridge/amd/amdfam10/conf.c +++ b/src/northbridge/amd/amdfam10/conf.c @@ -38,7 +38,7 @@ static struct dram_base_mask_t get_dram_base_mask(u32 nodeid) dev = __f1_dev[0]; #endif -#if CONFIG_EXT_CONF_SUPPORT == 1 +#if CONFIG_EXT_CONF_SUPPORT // I will use ext space only for simple pci_write_config32(dev, 0x110, nodeid | (1<<28)); // [47:27] at [28:8] d.mask = pci_read_config32(dev, 0x114); // enable is bit 0 @@ -61,12 +61,12 @@ static struct dram_base_mask_t get_dram_base_mask(u32 nodeid) return d; } -#if CONFIG_AMDMCT == 0 +#if !CONFIG_AMDMCT static void set_dram_base_mask(u32 nodeid, struct dram_base_mask_t d, u32 nodes) { u32 i; device_t dev; -#if CONFIG_EXT_CONF_SUPPORT == 1 +#if CONFIG_EXT_CONF_SUPPORT // I will use ext space only for simple u32 d_base_i, d_base_d, d_mask_i, d_mask_d; d_base_i = nodeid | (0<<28); @@ -95,7 +95,7 @@ static void set_dram_base_mask(u32 nodeid, struct dram_base_mask_t d, u32 nodes) dev = __f1_dev[i]; #endif -#if CONFIG_EXT_CONF_SUPPORT == 1 +#if CONFIG_EXT_CONF_SUPPORT // I will use ext space only for simple pci_write_config32(dev, 0x110, d_base_i); pci_write_config32(dev, 0x114, d_base_d); //[47:27] at [28:8]; @@ -120,7 +120,7 @@ static void set_dram_base_mask(u32 nodeid, struct dram_base_mask_t d, u32 nodes) } #endif -#if CONFIG_AMDMCT == 0 +#if !CONFIG_AMDMCT static void set_DctSelBaseAddr(u32 i, u32 sel_m) { device_t dev; diff --git a/src/northbridge/amd/amdfam10/debug.c b/src/northbridge/amd/amdfam10/debug.c index 2dc54275fd..c6f7c780a9 100644 --- a/src/northbridge/amd/amdfam10/debug.c +++ b/src/northbridge/amd/amdfam10/debug.c @@ -33,7 +33,7 @@ static inline void print_debug_addr(const char *str, void *val) static void print_debug_pci_dev(u32 dev) { -#if CONFIG_PCI_BUS_SEGN_BITS==0 +#if !CONFIG_PCI_BUS_SEGN_BITS printk(BIOS_DEBUG, "PCI: %02x:%02x.%02x", (dev>>20) & 0xff, (dev>>15) & 0x1f, (dev>>12) & 0x7); #else printk(BIOS_DEBUG, "PCI: %04x:%02x:%02x.%02x", (dev>>28) & 0x0f, (dev>>20) & 0xff, (dev>>15) & 0x1f, (dev>>12) & 0x7); diff --git a/src/northbridge/amd/amdfam10/early_ht.c b/src/northbridge/amd/amdfam10/early_ht.c index 58f2cddb36..bbf6b86ac9 100644 --- a/src/northbridge/amd/amdfam10/early_ht.c +++ b/src/northbridge/amd/amdfam10/early_ht.c @@ -21,7 +21,7 @@ // mmconf is not ready yet static void set_bsp_node_CHtExtNodeCfgEn(void) { -#if CONFIG_EXT_RT_TBL_SUPPORT == 1 +#if CONFIG_EXT_RT_TBL_SUPPORT u32 dword; dword = pci_io_read_config32(PCI_DEV(0, 0x18, 0), 0x68); dword |= (1<<27) | (1<<25); @@ -112,7 +112,7 @@ static void enumerate_ht_chain(void) real_last_pos = pos; ht_dev_num++ ; #endif - #if CONFIG_HT_CHAIN_END_UNITID_BASE == 0 + #if !CONFIG_HT_CHAIN_END_UNITID_BASE if (!next_unitid) goto out; #endif diff --git a/src/northbridge/amd/amdfam10/northbridge.c b/src/northbridge/amd/amdfam10/northbridge.c index 89bd6733ce..0e80c71324 100644 --- a/src/northbridge/amd/amdfam10/northbridge.c +++ b/src/northbridge/amd/amdfam10/northbridge.c @@ -31,7 +31,7 @@ #include <cpu/x86/lapic.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <cpu/amd/multicore.h> #include <pc80/mc146818rtc.h> #endif @@ -161,7 +161,7 @@ static u32 amdfam10_scan_chain(device_t dev, u32 nodeid, struct bus *link, u32 l #endif u32 max_devfn; -#if CONFIG_HT3_SUPPORT==1 +#if CONFIG_HT3_SUPPORT if(is_sublink1) { u32 regpos; u32 reg; @@ -192,7 +192,7 @@ static u32 amdfam10_scan_chain(device_t dev, u32 nodeid, struct bus *link, u32 l */ ht_c_index = get_ht_c_index(nodeid, link_num, &sysconf); -#if CONFIG_EXT_CONF_SUPPORT == 0 +#if !CONFIG_EXT_CONF_SUPPORT if(ht_c_index>=4) return max; #endif @@ -316,7 +316,7 @@ static unsigned amdfam10_scan_chains(device_t dev, unsigned max) #endif offset_unitid = 0; #if ((CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20)) - #if CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1 + #if CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY if((nodeid == 0) && (sblink == link->link_num)) #endif offset_unitid = 1; @@ -434,7 +434,7 @@ static void amdfam10_link_read_bases(device_t dev, u32 nodeid, u32 link) resource = amdfam10_find_iopair(dev, nodeid, link); if (resource) { u32 align; -#if CONFIG_EXT_CONF_SUPPORT == 1 +#if CONFIG_EXT_CONF_SUPPORT if((resource->index & 0x1fff) == 0x1110) { // ext align = 8; } @@ -460,7 +460,7 @@ static void amdfam10_link_read_bases(device_t dev, u32 nodeid, u32 link) resource->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; resource->flags |= IORESOURCE_BRIDGE; -#if CONFIG_EXT_CONF_SUPPORT == 1 +#if CONFIG_EXT_CONF_SUPPORT if((resource->index & 0x1fff) == 0x1110) { // ext normalize_resource(resource); } @@ -477,7 +477,7 @@ static void amdfam10_link_read_bases(device_t dev, u32 nodeid, u32 link) resource->gran = log2(HT_MEM_HOST_ALIGN); resource->limit = 0xffffffffffULL; resource->flags = IORESOURCE_MEM | IORESOURCE_BRIDGE; -#if CONFIG_EXT_CONF_SUPPORT == 1 +#if CONFIG_EXT_CONF_SUPPORT if((resource->index & 0x1fff) == 0x1110) { // ext normalize_resource(resource); } @@ -560,7 +560,7 @@ static void amdfam10_create_vga_resource(device_t dev, unsigned nodeid) * we only deal with the 'first' vga card */ for (link = dev->link_list; link; link = link->next) { if (link->bridge_ctrl & PCI_BRIDGE_CTL_VGA) { -#if CONFIG_MULTIPLE_VGA_ADAPTERS == 1 +#if CONFIG_MULTIPLE_VGA_ADAPTERS extern device_t vga_pri; // the primary vga device, defined in device.c printk(BIOS_DEBUG, "VGA: vga_pri bus num = %d bus range [%d,%d]\n", vga_pri->bus->secondary, link->secondary,link->subordinate); @@ -664,7 +664,7 @@ static void amdfam10_domain_read_resources(device_t dev) /* FIXME: do we need to check extend conf space? I don't believe that much preset value */ -#if CONFIG_PCI_64BIT_PREF_MEM == 0 +#if !CONFIG_PCI_64BIT_PREF_MEM pci_domain_read_resources(dev); #else struct bus *link; @@ -762,7 +762,7 @@ static struct hw_mem_hole_info get_hw_mem_hole_info(void) // WHY this check? CONFIG_AMDMCT is enabled on all Fam10 boards. // Does it make sense not to? -#if CONFIG_AMDMCT == 0 +#if !CONFIG_AMDMCT static void disable_hoist_memory(unsigned long hole_startk, int node_id) { int i; @@ -843,11 +843,11 @@ static void disable_hoist_memory(unsigned long hole_startk, int node_id) #endif -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES #include <cbmem.h> #endif -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA extern uint64_t uma_memory_base, uma_memory_size; static void add_uma_resource(struct device *dev, int index) @@ -865,7 +865,7 @@ static void add_uma_resource(struct device *dev, int index) static void amdfam10_domain_set_resources(device_t dev) { -#if CONFIG_PCI_64BIT_PREF_MEM == 1 +#if CONFIG_PCI_64BIT_PREF_MEM struct resource *io, *mem1, *mem2; struct resource *res; #endif @@ -878,7 +878,7 @@ static void amdfam10_domain_set_resources(device_t dev) u32 reset_memhole = 1; #endif -#if CONFIG_PCI_64BIT_PREF_MEM == 1 +#if CONFIG_PCI_64BIT_PREF_MEM for(link = dev->link_list; link; link = link->next) { /* Now reallocate the pci resources memory with the @@ -960,7 +960,7 @@ static void amdfam10_domain_set_resources(device_t dev) reset_memhole = 0; } - #if CONFIG_AMDMCT == 0 + #if !CONFIG_AMDMCT //mmio_basek = 3*1024*1024; // for debug to meet boundary if(reset_memhole) { @@ -975,7 +975,7 @@ static void amdfam10_domain_set_resources(device_t dev) disable_hoist_memory(mem_hole.hole_startk, mem_hole.node_id); } - #if CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC == 1 + #if CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC // We need to double check if the mmio_basek is valid for hole // setting, if it is equal to basek, we need to decrease it some resource_t basek_pri; @@ -1031,10 +1031,10 @@ static void amdfam10_domain_set_resources(device_t dev) ram_resource(dev, (idx | i), basek, pre_sizek); idx += 0x10; sizek -= pre_sizek; -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES if (high_tables_base==0) { /* Leave some space for ACPI, PIRQ and MP tables */ -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA high_tables_base = uma_memory_base - HIGH_MEMORY_SIZE; #else high_tables_base = (mmio_basek * 1024) - HIGH_MEMORY_SIZE; @@ -1045,7 +1045,7 @@ static void amdfam10_domain_set_resources(device_t dev) } #endif } - #if CONFIG_AMDMCT == 0 + #if !CONFIG_AMDMCT #if CONFIG_HW_MEM_HOLE_SIZEK != 0 if(reset_memhole) { struct sys_info *sysinfox = (struct sys_info *)((CONFIG_RAMTOP) - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM @@ -1067,19 +1067,19 @@ static void amdfam10_domain_set_resources(device_t dev) } } -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA /* Deduct uma memory before reporting because * this is what the mtrr code expects */ sizek -= uma_memory_size / 1024; #endif ram_resource(dev, (idx | i), basek, sizek); idx += 0x10; -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES printk(BIOS_DEBUG, "%d: mmio_basek=%08lx, basek=%08llx, limitk=%08llx\n", i, mmio_basek, basek, limitk); if (high_tables_base==0) { /* Leave some space for ACPI, PIRQ and MP tables */ -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA high_tables_base = uma_memory_base - HIGH_MEMORY_SIZE; #else high_tables_base = (limitk * 1024) - HIGH_MEMORY_SIZE; @@ -1089,7 +1089,7 @@ static void amdfam10_domain_set_resources(device_t dev) #endif } -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA add_uma_resource(dev, 7); #endif @@ -1109,7 +1109,7 @@ static u32 amdfam10_domain_scan_bus(device_t dev, u32 max) for(reg = 0xe0; reg <= 0xec; reg += 4) { f1_write_config32(reg, 0); } -#if CONFIG_EXT_CONF_SUPPORT == 1 +#if CONFIG_EXT_CONF_SUPPORT // all nodes for(i = 0; i< sysconf.nodes; i++) { int index; @@ -1187,7 +1187,7 @@ static void sysconf_init(device_t dev) // first node sysconf.bsp_apicid = lapicid(); sysconf.apicid_offset = sysconf.bsp_apicid; -#if (CONFIG_ENABLE_APIC_EXT_ID == 1) +#if CONFIG_ENABLE_APIC_EXT_ID if (pci_read_config32(dev, 0x68) & (HTTC_APIC_EXT_ID|HTTC_APIC_EXT_BRD_CST)) { sysconf.enabled_apic_ext_id = 1; @@ -1265,7 +1265,7 @@ static u32 cpu_bus_scan(device_t dev, u32 max) } disable_siblings = !CONFIG_LOGICAL_CPUS; -#if CONFIG_LOGICAL_CPUS == 1 +#if CONFIG_LOGICAL_CPUS get_option(&disable_siblings, "multi_core"); #endif @@ -1371,7 +1371,7 @@ static u32 cpu_bus_scan(device_t dev, u32 max) * otherwise the device under it will not be scanned */ int linknum; -#if CONFIG_HT3_SUPPORT==1 +#if CONFIG_HT3_SUPPORT linknum = 8; #else linknum = 4; diff --git a/src/northbridge/amd/amdfam10/reset_test.c b/src/northbridge/amd/amdfam10/reset_test.c index c48fca630c..f1f22cbf35 100644 --- a/src/northbridge/amd/amdfam10/reset_test.c +++ b/src/northbridge/amd/amdfam10/reset_test.c @@ -127,7 +127,7 @@ static u8 node_link_to_bus(u8 node, u8 link) // node are 6 bit, and link three b } } -#if CONFIG_EXT_CONF_SUPPORT == 1 +#if CONFIG_EXT_CONF_SUPPORT // let's check that in extend space // use the nodeid extend space to find out the bus for the linkn u32 tempreg; diff --git a/src/northbridge/amd/amdht/ht_wrapper.c b/src/northbridge/amd/amdht/ht_wrapper.c index 32908c4936..ff444d5225 100644 --- a/src/northbridge/amd/amdht/ht_wrapper.c +++ b/src/northbridge/amd/amdht/ht_wrapper.c @@ -28,7 +28,7 @@ */ /* Single CPU system? */ -#if (CONFIG_MAX_PHYSICAL_CPUS == 1) +#if CONFIG_MAX_PHYSICAL_CPUS #define HT_BUILD_NC_ONLY 1 #endif diff --git a/src/northbridge/amd/amdk8/amdk8.h b/src/northbridge/amd/amdk8/amdk8.h index e353edc479..5aa3b31fbf 100644 --- a/src/northbridge/amd/amdk8/amdk8.h +++ b/src/northbridge/amd/amdk8/amdk8.h @@ -2,7 +2,7 @@ #define AMDK8_H -#if CONFIG_K8_REV_F_SUPPORT == 1 +#if CONFIG_K8_REV_F_SUPPORT #include "f.h" #else #include "pre_f.h" diff --git a/src/northbridge/amd/amdk8/coherent_ht.c b/src/northbridge/amd/amdk8/coherent_ht.c index a262686f87..636114df15 100644 --- a/src/northbridge/amd/amdk8/coherent_ht.c +++ b/src/northbridge/amd/amdk8/coherent_ht.c @@ -160,7 +160,7 @@ static void disable_probes(void) #if 0 static void enable_apic_ext_id(u8 node) { -#if CONFIG_ENABLE_APIC_EXT_ID==1 +#if CONFIG_ENABLE_APIC_EXT_ID #warning "FIXME Is the right place to enable apic ext id here?" u32 val; @@ -284,8 +284,8 @@ static uint16_t read_freq_cap(device_t dev, uint8_t pos) freq_cap = pci_read_config16(dev, pos); freq_cap &= ~(1 << HT_FREQ_VENDOR); /* Ignore Vendor HT frequencies */ -#if CONFIG_K8_HT_FREQ_1G_SUPPORT == 1 - #if CONFIG_K8_REV_F_SUPPORT == 0 +#if CONFIG_K8_HT_FREQ_1G_SUPPORT + #if !CONFIG_K8_REV_F_SUPPORT if (!is_cpu_pre_e0()) #endif { @@ -665,7 +665,7 @@ static void setup_remote_row_indirect_group(const u8 *conn, int num) static void setup_uniprocessor(void) { print_spew("Enabling UP settings\n"); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS unsigned tmp = (pci_read_config32(NODE_MC(0), 0xe8) >> 12) & 3; if (tmp>0) return; #endif @@ -1574,7 +1574,7 @@ static void clear_dead_routes(unsigned nodes) } #endif /* CONFIG_MAX_PHYSICAL_CPUS > 1 */ -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS static unsigned verify_dualcore(unsigned nodes) { unsigned node, totalcpus, tmp; @@ -1593,10 +1593,10 @@ static unsigned verify_dualcore(unsigned nodes) static void coherent_ht_finalize(unsigned nodes) { unsigned node; -#if CONFIG_K8_REV_F_SUPPORT == 0 +#if !CONFIG_K8_REV_F_SUPPORT int rev_a0; #endif -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS unsigned total_cpus; if (read_option(multi_core, 0) == 0) { /* multi_core */ @@ -1614,7 +1614,7 @@ static void coherent_ht_finalize(unsigned nodes) */ print_spew("coherent_ht_finalize\n"); -#if CONFIG_K8_REV_F_SUPPORT == 0 +#if !CONFIG_K8_REV_F_SUPPORT rev_a0 = is_cpu_rev_a0(); #endif for (node = 0; node < nodes; node++) { @@ -1625,7 +1625,7 @@ static void coherent_ht_finalize(unsigned nodes) /* Set the Total CPU and Node count in the system */ val = pci_read_config32(dev, 0x60); val &= (~0x000F0070); -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS val |= ((total_cpus-1)<<16)|((nodes-1)<<4); #else val |= ((nodes-1)<<16)|((nodes-1)<<4); @@ -1645,7 +1645,7 @@ static void coherent_ht_finalize(unsigned nodes) (3 << HTTC_HI_PRI_BYP_CNT_SHIFT); pci_write_config32(dev, HT_TRANSACTION_CONTROL, val); -#if CONFIG_K8_REV_F_SUPPORT == 0 +#if !CONFIG_K8_REV_F_SUPPORT if (rev_a0) { pci_write_config32(dev, 0x94, 0); pci_write_config32(dev, 0xb4, 0); @@ -1665,7 +1665,7 @@ static int apply_cpu_errata_fixes(unsigned nodes) device_t dev; uint32_t cmd; dev = NODE_MC(node); -#if CONFIG_K8_REV_F_SUPPORT == 0 +#if !CONFIG_K8_REV_F_SUPPORT if (is_cpu_pre_c0()) { /* Errata 66 @@ -1710,7 +1710,7 @@ static int apply_cpu_errata_fixes(unsigned nodes) #endif -#if CONFIG_K8_REV_F_SUPPORT == 0 +#if !CONFIG_K8_REV_F_SUPPORT /* I can't touch this msr on early buggy cpus, and cannot apply either 169 or 131 */ if (!is_cpu_pre_b3()) #endif diff --git a/src/northbridge/amd/amdk8/debug.c b/src/northbridge/amd/amdk8/debug.c index fd9fe6063e..4f9d8cafa9 100644 --- a/src/northbridge/amd/amdk8/debug.c +++ b/src/northbridge/amd/amdk8/debug.c @@ -57,7 +57,7 @@ static void dump_pci_device(unsigned dev) print_debug("\n"); } -#if CONFIG_K8_REV_F_SUPPORT == 1 +#if CONFIG_K8_REV_F_SUPPORT static uint32_t pci_read_config32_index_wait(device_t dev, uint32_t index_reg, uint32_t index); static inline void dump_pci_device_index_wait(unsigned dev, uint32_t index_reg) { diff --git a/src/northbridge/amd/amdk8/incoherent_ht.c b/src/northbridge/amd/amdk8/incoherent_ht.c index f57eb5bf37..ee1945a123 100644 --- a/src/northbridge/amd/amdk8/incoherent_ht.c +++ b/src/northbridge/amd/amdk8/incoherent_ht.c @@ -67,7 +67,7 @@ static void ht_collapse_previous_enumeration(uint8_t bus, unsigned offset_unitid device_t dev; //actually, only for one HT device HT chain, and unitid is 0 -#if CONFIG_HT_CHAIN_UNITID_BASE == 0 +#if !CONFIG_HT_CHAIN_UNITID_BASE if(offset_unitid) { return; } @@ -136,8 +136,8 @@ static uint16_t ht_read_freq_cap(device_t dev, uint8_t pos) /* AMD K8 Unsupported 1Ghz? */ if (id == (PCI_VENDOR_ID_AMD | (0x1100 << 16))) { - #if CONFIG_K8_HT_FREQ_1G_SUPPORT == 1 - #if CONFIG_K8_REV_F_SUPPORT == 0 + #if CONFIG_K8_HT_FREQ_1G_SUPPORT + #if !CONFIG_K8_REV_F_SUPPORT if (is_cpu_pre_e0()) { // only E0 later support 1GHz freq_cap &= ~(1 << HT_FREQ_1000Mhz); } @@ -149,7 +149,7 @@ static uint16_t ht_read_freq_cap(device_t dev, uint8_t pos) printk(BIOS_SPEW, "pos=0x%x, filtered freq_cap=0x%x\n", pos, freq_cap); -#if CONFIG_SOUTHBRIDGE_VIA_SUBTYPE_K8M890 == 1 +#if CONFIG_SOUTHBRIDGE_VIA_SUBTYPE_K8M890 freq_cap &= 0x3f; printk(BIOS_INFO, "Limiting HT to 800/600/400/200 MHz until K8M890 HT1000 is fixed.\n"); #endif @@ -539,7 +539,7 @@ static int optimize_link_read_pointers_chain(uint8_t ht_c_num) unsigned devn = 1; #if ((CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20)) - #if CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1 + #if CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY if(i==0) // to check if it is sb ht chain #endif devn = CONFIG_HT_CHAIN_UNITID_BASE; @@ -671,7 +671,7 @@ static int ht_setup_chains(uint8_t ht_c_num) #if ((CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20)) - #if CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1 + #if CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY if(i==0) // to check if it is sb ht chain #endif offset_unitid = 1; diff --git a/src/northbridge/amd/amdk8/misc_control.c b/src/northbridge/amd/amdk8/misc_control.c index 7ba2b90406..cc69883007 100644 --- a/src/northbridge/amd/amdk8/misc_control.c +++ b/src/northbridge/amd/amdk8/misc_control.c @@ -124,7 +124,7 @@ static void misc_control_init(struct device *dev) cmd = pci_read_config32(dev, 0x44); cmd |= (1<<6) | (1<<25); pci_write_config32(dev, 0x44, cmd ); -#if CONFIG_K8_REV_F_SUPPORT == 0 +#if !CONFIG_K8_REV_F_SUPPORT if (is_cpu_pre_c0()) { /* Errata 58 diff --git a/src/northbridge/amd/amdk8/northbridge.c b/src/northbridge/amd/amdk8/northbridge.c index 90b4ebf51d..5eeeda21a4 100644 --- a/src/northbridge/amd/amdk8/northbridge.c +++ b/src/northbridge/amd/amdk8/northbridge.c @@ -20,7 +20,7 @@ #include <cpu/x86/lapic.h> #include <cpu/amd/multicore.h> -#if CONFIG_LOGICAL_CPUS==1 +#if CONFIG_LOGICAL_CPUS #include <pc80/mc146818rtc.h> #endif @@ -256,7 +256,7 @@ static unsigned amdk8_scan_chains(device_t dev, unsigned max) #endif offset_unitid = 0; #if ((CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20)) - #if CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1 + #if CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY if((nodeid == 0) && (sblink == link->link_num)) #endif offset_unitid = 1; @@ -494,7 +494,7 @@ static void amdk8_create_vga_resource(device_t dev, unsigned nodeid) * we only deal with the 'first' vga card */ for (link = dev->link_list; link; link = link->next) { if (link->bridge_ctrl & PCI_BRIDGE_CTL_VGA) { -#if CONFIG_MULTIPLE_VGA_ADAPTERS == 1 +#if CONFIG_MULTIPLE_VGA_ADAPTERS extern device_t vga_pri; // the primary vga device, defined in device.c printk(BIOS_DEBUG, "VGA: vga_pri bus num = %d link bus range [%d,%d]\n", vga_pri->bus->secondary, link->secondary,link->subordinate); @@ -635,7 +635,7 @@ static void amdk8_domain_read_resources(device_t dev) pci_domain_read_resources(dev); -#if CONFIG_PCI_64BIT_PREF_MEM == 1 +#if CONFIG_PCI_64BIT_PREF_MEM /* Initialize the system wide prefetchable memory resources constraints */ resource = new_resource(dev, 2); resource->limit = 0xfcffffffffULL; @@ -818,11 +818,11 @@ static u32 hoist_memory(unsigned long hole_startk, int node_id) } #endif -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES #include <cbmem.h> #endif -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA extern uint64_t uma_memory_base, uma_memory_size; static void add_uma_resource(struct device *dev, int index) @@ -840,7 +840,7 @@ static void add_uma_resource(struct device *dev, int index) static void amdk8_domain_set_resources(device_t dev) { -#if CONFIG_PCI_64BIT_PREF_MEM == 1 +#if CONFIG_PCI_64BIT_PREF_MEM struct resource *io, *mem1, *mem2; struct resource *res; #endif @@ -857,7 +857,7 @@ static void amdk8_domain_set_resources(device_t dev) io = find_resource(dev, 0); io->base = DEVICE_IO_START; #endif -#if CONFIG_PCI_64BIT_PREF_MEM == 1 +#if CONFIG_PCI_64BIT_PREF_MEM /* Now reallocate the pci resources memory with the * highest addresses I can manage. */ @@ -927,7 +927,7 @@ static void amdk8_domain_set_resources(device_t dev) * if mmio_basek is bigger that hole_basek and will use hole_basek as mmio_basek and we don't need to reset hole. * otherwise We reset the hole to the mmio_basek */ - #if CONFIG_K8_REV_F_SUPPORT == 0 + #if !CONFIG_K8_REV_F_SUPPORT if (!is_cpu_pre_e0()) { #endif @@ -947,7 +947,7 @@ static void amdk8_domain_set_resources(device_t dev) disable_hoist_memory(mem_hole.hole_startk, mem_hole.node_id); } - #if CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC == 1 + #if CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC //We need to double check if the mmio_basek is valid for hole setting, if it is equal to basek, we need to decrease it some u32 basek_pri; for (i = 0; i < fx_devs; i++) { @@ -968,7 +968,7 @@ static void amdk8_domain_set_resources(device_t dev) #endif } -#if CONFIG_K8_REV_F_SUPPORT == 0 +#if !CONFIG_K8_REV_F_SUPPORT } // is_cpu_pre_e0 #endif @@ -997,7 +997,7 @@ static void amdk8_domain_set_resources(device_t dev) } -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA printk(BIOS_DEBUG, "node %d : uma_memory_base/1024=0x%08llx, mmio_basek=0x%08lx, basek=0x%08x, limitk=0x%08x\n", i, uma_memory_base >> 10, mmio_basek, basek, limitk); if ((uma_memory_base >> 10) < mmio_basek) printk(BIOS_ALERT, "node %d: UMA memory starts below mmio_basek\n", i); @@ -1014,10 +1014,10 @@ static void amdk8_domain_set_resources(device_t dev) ram_resource(dev, (idx | i), basek, pre_sizek); idx += 0x10; sizek -= pre_sizek; -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES if (high_tables_base==0) { /* Leave some space for ACPI, PIRQ and MP tables */ -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA high_tables_base = uma_memory_base - HIGH_MEMORY_SIZE; #else high_tables_base = (mmio_basek * 1024) - HIGH_MEMORY_SIZE; @@ -1030,7 +1030,7 @@ static void amdk8_domain_set_resources(device_t dev) } #if CONFIG_HW_MEM_HOLE_SIZEK != 0 if(reset_memhole) - #if CONFIG_K8_REV_F_SUPPORT == 0 + #if !CONFIG_K8_REV_F_SUPPORT if(!is_cpu_pre_e0() ) #endif sizek += hoist_memory(mmio_basek,i); @@ -1049,7 +1049,7 @@ static void amdk8_domain_set_resources(device_t dev) /* If sizek == 0, it was split at mmio_basek without a hole. * Don't create an empty ram_resource. */ -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA /* Deduct uma memory before reporting because * this is what the mtrr code expects */ sizek -= uma_memory_size / 1024; @@ -1057,12 +1057,12 @@ static void amdk8_domain_set_resources(device_t dev) if (sizek) ram_resource(dev, (idx | i), basek, sizek); idx += 0x10; -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES printk(BIOS_DEBUG, "%d: mmio_basek=%08lx, basek=%08x, limitk=%08x\n", i, mmio_basek, basek, limitk); if (high_tables_base==0) { /* Leave some space for ACPI, PIRQ and MP tables */ -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA high_tables_base = uma_memory_base - HIGH_MEMORY_SIZE; #else high_tables_base = (limitk * 1024) - HIGH_MEMORY_SIZE; @@ -1072,7 +1072,7 @@ static void amdk8_domain_set_resources(device_t dev) #endif } -#if CONFIG_GFXUMA == 1 +#if CONFIG_GFXUMA add_uma_resource(dev, 7); #endif assign_resources(dev->link_list); @@ -1179,7 +1179,7 @@ static u32 cpu_bus_scan(device_t dev, u32 max) sysconf.apicid_offset = bsp_apicid; disable_siblings = !CONFIG_LOGICAL_CPUS; -#if CONFIG_LOGICAL_CPUS == 1 +#if CONFIG_LOGICAL_CPUS get_option(&disable_siblings, "multi_core"); #endif @@ -1248,7 +1248,7 @@ static u32 cpu_bus_scan(device_t dev, u32 max) // That is the typical case if(j == 0 ){ - #if CONFIG_K8_REV_F_SUPPORT == 0 + #if !CONFIG_K8_REV_F_SUPPORT e0_later_single_core = is_e0_later_in_bsp(i); // single core #else e0_later_single_core = is_cpu_f0_in_bsp(i); // We can read cpuid(1) from Func3 diff --git a/src/northbridge/amd/amdk8/raminit.c b/src/northbridge/amd/amdk8/raminit.c index 9cb7c60004..7db338b42a 100644 --- a/src/northbridge/amd/amdk8/raminit.c +++ b/src/northbridge/amd/amdk8/raminit.c @@ -2289,7 +2289,7 @@ static void set_hw_mem_hole(int controllers, const struct mem_controller *ctrl) hole_startk = 4*1024*1024 - CONFIG_HW_MEM_HOLE_SIZEK; printk(BIOS_SPEW, "Handling memory hole at 0x%08x (default)\n", hole_startk); -#if CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC == 1 +#if CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC /* We need to double check if hole_startk is valid. * If it is equal to the dram base address in K (base_k), * we need to decrease it. @@ -2348,7 +2348,7 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) { int i; u32 whatWait = 0; -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME int suspend = acpi_is_wakeup_early(); #else int suspend = 0; diff --git a/src/northbridge/amd/amdk8/raminit_f.c b/src/northbridge/amd/amdk8/raminit_f.c index 33df485c8c..86c409f949 100644 --- a/src/northbridge/amd/amdk8/raminit_f.c +++ b/src/northbridge/amd/amdk8/raminit_f.c @@ -2965,7 +2965,7 @@ static void set_hw_mem_hole(int controllers, const struct mem_controller *ctrl) hole_startk = 4*1024*1024 - CONFIG_HW_MEM_HOLE_SIZEK; printk_raminit("Handling memory hole at 0x%08x (default)\n", hole_startk); -#if CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC == 1 +#if CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC /* We need to double check if the hole_startk is valid, if it is equal to basek, we need to decrease it some */ uint32_t basek_pri; @@ -3009,7 +3009,7 @@ static void set_hw_mem_hole(int controllers, const struct mem_controller *ctrl) } #endif -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME #include "exit_from_self.c" #endif @@ -3017,7 +3017,7 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl, struct sys_info *sysinfo) { int i; -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME int suspend = acpi_is_wakeup_early(); #else int suspend = 0; @@ -3190,7 +3190,7 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl, } -#if CONFIG_MEM_TRAIN_SEQ == 0 +#if CONFIG_MEM_TRAIN_SEQ == 0 #if K8_REV_F_SUPPORT_F0_F1_WORKAROUND == 1 dqs_timing(controllers, ctrl, tsc0, sysinfo); #else diff --git a/src/northbridge/amd/amdk8/raminit_f_dqs.c b/src/northbridge/amd/amdk8/raminit_f_dqs.c index 8ddd44fadb..fdec120b50 100644 --- a/src/northbridge/amd/amdk8/raminit_f_dqs.c +++ b/src/northbridge/amd/amdk8/raminit_f_dqs.c @@ -1826,7 +1826,7 @@ static void set_sysinfo_in_ram(unsigned val) set_htic_bit(0, val, 9); } -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME #if CONFIG_MEM_TRAIN_SEQ == 0 static int save_index_to_pos(unsigned int dev, int size, int index, int nvram_pos) @@ -1981,7 +1981,7 @@ static void dqs_timing(int controllers, const struct mem_controller *ctrl, struc if(train_DqsRcvrEn(ctrl+i, 2, sysinfo)) goto out; printk(BIOS_DEBUG, " done\n"); sysinfo->mem_trained[i]=1; -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME dqs_save_MC_NVRAM((ctrl+i)->f2); #endif } @@ -2103,7 +2103,7 @@ static inline void train_ram_on_node(unsigned nodeid, unsigned coreid, struct sy memcpy(sysinfo, sysinfox, CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); #endif set_top_mem_ap(sysinfo->tom_k, sysinfo->tom2_k); // keep the ap's tom consistent with bsp's - #if CONFIG_AP_CODE_IN_CAR == 0 + #if !CONFIG_AP_CODE_IN_CAR printk(BIOS_DEBUG, "CODE IN ROM AND RUN ON NODE: %02x\n", nodeid); train_ram(nodeid, sysinfo, sysinfox); #else diff --git a/src/northbridge/amd/amdmct/wrappers/mcti_d.c b/src/northbridge/amd/amdmct/wrappers/mcti_d.c index 4af75fd0e2..00b15556ca 100644 --- a/src/northbridge/amd/amdmct/wrappers/mcti_d.c +++ b/src/northbridge/amd/amdmct/wrappers/mcti_d.c @@ -64,14 +64,14 @@ static u16 mctGet_NVbits(u8 index) //val = 2; /* S4 (Unbuffered SO-DIMMS) */ break; case NV_BYPMAX: -#if (CONFIG_GFXUMA == 0) +#if !CONFIG_GFXUMA val = 4; #elif (CONFIG_GFXUMA == 1) val = 7; #endif break; case NV_RDWRQBYP: -#if (CONFIG_GFXUMA == 0) +#if !CONFIG_GFXUMA val = 2; #elif (CONFIG_GFXUMA == 1) val = 3; @@ -113,7 +113,7 @@ static u16 mctGet_NVbits(u8 index) //val = 1; /* Enable */ break; case NV_BurstLen32: -#if (CONFIG_GFXUMA == 0) +#if !CONFIG_GFXUMA val = 0; /* 64 byte mode */ #elif (CONFIG_GFXUMA == 1) val = 1; /* 32 byte mode */ @@ -132,14 +132,14 @@ static u16 mctGet_NVbits(u8 index) //val = 1; /* enable */ break; case NV_BottomIO: -#if (CONFIG_GFXUMA == 0) +#if !CONFIG_GFXUMA val = 0xE0; /* address bits [31:24] */ #elif (CONFIG_GFXUMA == 1) val = 0xC0; /* address bits [31:24] */ #endif break; case NV_BottomUMA: -#if (CONFIG_GFXUMA == 0) +#if !CONFIG_GFXUMA val = 0xE0; /* address bits [31:24] */ #elif (CONFIG_GFXUMA == 1) val = 0xC0; /* address bits [31:24] */ diff --git a/src/northbridge/amd/gx1/northbridge.c b/src/northbridge/amd/gx1/northbridge.c index abbc85558c..5c59f7314a 100644 --- a/src/northbridge/amd/gx1/northbridge.c +++ b/src/northbridge/amd/gx1/northbridge.c @@ -66,7 +66,7 @@ static const struct pci_driver northbridge_driver __pci_driver = { .device = PCI_DEVICE_ID_CYRIX_PCI_MASTER, }; -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES #include <cbmem.h> #endif @@ -113,7 +113,7 @@ static void pci_domain_set_resources(device_t dev) tolmk = tomk; } -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES /* Leave some space for ACPI, PIRQ and MP tables */ high_tables_base = (tolmk * 1024) - HIGH_MEMORY_SIZE; high_tables_size = HIGH_MEMORY_SIZE; diff --git a/src/northbridge/amd/gx2/northbridge.c b/src/northbridge/amd/gx2/northbridge.c index f567766ffc..8da37b4ebf 100644 --- a/src/northbridge/amd/gx2/northbridge.c +++ b/src/northbridge/amd/gx2/northbridge.c @@ -273,7 +273,7 @@ static const struct pci_driver northbridge_driver __pci_driver = { .device = PCI_DEVICE_ID_NS_GX2, }; -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES #include <cbmem.h> #endif @@ -294,7 +294,7 @@ static void pci_domain_set_resources(device_t dev) ram_resource(dev, idx++, 0, 640); ram_resource(dev, idx++, 768, tomk - 768); /* Systop - 0xc0000 -> KB */ -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES /* Leave some space for ACPI, PIRQ and MP tables */ high_tables_base = (tomk * 1024) - HIGH_MEMORY_SIZE; high_tables_size = HIGH_MEMORY_SIZE; diff --git a/src/northbridge/amd/lx/northbridge.c b/src/northbridge/amd/lx/northbridge.c index 61f3afec5f..9ceceb8740 100644 --- a/src/northbridge/amd/lx/northbridge.c +++ b/src/northbridge/amd/lx/northbridge.c @@ -372,7 +372,7 @@ static const struct pci_driver northbridge_driver __pci_driver = { .device = PCI_DEVICE_ID_AMD_LXBRIDGE, }; -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES #include <cbmem.h> #endif @@ -393,7 +393,7 @@ static void pci_domain_set_resources(device_t dev) ram_resource(dev, idx++, 0, 640); ram_resource(dev, idx++, 768, tomk - 768); // Systop - 0xc0000 -> KB -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES /* Leave some space for ACPI, PIRQ and MP tables */ high_tables_base = (tomk * 1024) - HIGH_MEMORY_SIZE; high_tables_size = HIGH_MEMORY_SIZE; diff --git a/src/northbridge/intel/e7501/northbridge.c b/src/northbridge/intel/e7501/northbridge.c index e6e955fb4f..1fa77d7931 100644 --- a/src/northbridge/intel/e7501/northbridge.c +++ b/src/northbridge/intel/e7501/northbridge.c @@ -9,7 +9,7 @@ #include <bitops.h> #include "chip.h" -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES #include <cbmem.h> #endif @@ -89,7 +89,7 @@ static void pci_domain_set_resources(device_t dev) (remaplimitk + 64*1024) - remapbasek); } -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES /* Leave some space for ACPI, PIRQ and MP tables */ high_tables_base = (tolmk * 1024) - HIGH_MEMORY_SIZE; high_tables_size = HIGH_MEMORY_SIZE; diff --git a/src/northbridge/intel/e7505/northbridge.c b/src/northbridge/intel/e7505/northbridge.c index 6a533cdfb1..9046f43687 100644 --- a/src/northbridge/intel/e7505/northbridge.c +++ b/src/northbridge/intel/e7505/northbridge.c @@ -10,7 +10,7 @@ #include "chip.h" #include "e7505.h" -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES #include <cbmem.h> #endif @@ -90,7 +90,7 @@ static void pci_domain_set_resources(device_t dev) (remaplimitk + 64*1024) - remapbasek); } -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES /* Leave some space for ACPI, PIRQ and MP tables */ high_tables_base = (tolmk * 1024) - HIGH_MEMORY_SIZE; high_tables_size = HIGH_MEMORY_SIZE; diff --git a/src/northbridge/intel/e7520/northbridge.c b/src/northbridge/intel/e7520/northbridge.c index 49c8ba3c71..3b92aa82f9 100644 --- a/src/northbridge/intel/e7520/northbridge.c +++ b/src/northbridge/intel/e7520/northbridge.c @@ -16,7 +16,7 @@ static unsigned int max_bus; -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES #include <cbmem.h> #endif @@ -108,7 +108,7 @@ static void pci_domain_set_resources(device_t dev) (remaplimitk + 64*1024) - remapbasek); } -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES /* Leave some space for ACPI, PIRQ and MP tables */ high_tables_base = (tolmk * 1024) - HIGH_MEMORY_SIZE; high_tables_size = HIGH_MEMORY_SIZE; diff --git a/src/northbridge/intel/e7525/northbridge.c b/src/northbridge/intel/e7525/northbridge.c index 5e9f9c53e6..ab88899641 100644 --- a/src/northbridge/intel/e7525/northbridge.c +++ b/src/northbridge/intel/e7525/northbridge.c @@ -16,7 +16,7 @@ static unsigned int max_bus; -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES #include <cbmem.h> #endif @@ -108,7 +108,7 @@ static void pci_domain_set_resources(device_t dev) (remaplimitk + 64*1024) - remapbasek); } -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES /* Leave some space for ACPI, PIRQ and MP tables */ high_tables_base = (tolmk * 1024) - HIGH_MEMORY_SIZE; high_tables_size = HIGH_MEMORY_SIZE; diff --git a/src/northbridge/intel/i3100/northbridge.c b/src/northbridge/intel/i3100/northbridge.c index acd4c3c302..db35b85a6d 100644 --- a/src/northbridge/intel/i3100/northbridge.c +++ b/src/northbridge/intel/i3100/northbridge.c @@ -37,7 +37,7 @@ static u32 max_bus; -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES #include <cbmem.h> #endif @@ -129,7 +129,7 @@ static void pci_domain_set_resources(device_t dev) (remaplimitk + 64*1024) - remapbasek); } -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES /* Leave some space for ACPI, PIRQ and MP tables */ high_tables_base = (tolmk * 1024) - HIGH_MEMORY_SIZE; high_tables_size = HIGH_MEMORY_SIZE; diff --git a/src/northbridge/intel/i3100/raminit.c b/src/northbridge/intel/i3100/raminit.c index 926d5b3afb..050df951e5 100644 --- a/src/northbridge/intel/i3100/raminit.c +++ b/src/northbridge/intel/i3100/raminit.c @@ -1197,7 +1197,7 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) pci_write_config16(ctrl->f0, MCHSCRB, data16); /* The memory is now setup, use it */ -#if CONFIG_CACHE_AS_RAM == 0 +#if !CONFIG_CACHE_AS_RAM cache_lbmem(MTRR_TYPE_WRBACK); #endif } diff --git a/src/northbridge/intel/i440bx/northbridge.c b/src/northbridge/intel/i440bx/northbridge.c index 136755e1e2..18e57167b4 100644 --- a/src/northbridge/intel/i440bx/northbridge.c +++ b/src/northbridge/intel/i440bx/northbridge.c @@ -33,7 +33,7 @@ static const struct pci_driver northbridge_driver __pci_driver = { .device = 0x7190, }; -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES #include <cbmem.h> #endif @@ -72,7 +72,7 @@ static void i440bx_domain_set_resources(device_t dev) ram_resource(dev, idx++, 0, 640); ram_resource(dev, idx++, 768, tolmk - 768); -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES /* Leave some space for ACPI, PIRQ and MP tables */ high_tables_base = (tomk * 1024) - HIGH_MEMORY_SIZE; high_tables_size = HIGH_MEMORY_SIZE; diff --git a/src/northbridge/intel/i440lx/northbridge.c b/src/northbridge/intel/i440lx/northbridge.c index 73be101b09..f34b5abaa8 100644 --- a/src/northbridge/intel/i440lx/northbridge.c +++ b/src/northbridge/intel/i440lx/northbridge.c @@ -62,7 +62,7 @@ static const struct pci_driver northbridge_driver __pci_driver = { .device = 0x7180, }; -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES #include <cbmem.h> #endif @@ -101,7 +101,7 @@ static void i440lx_domain_set_resources(device_t dev) ram_resource(dev, idx++, 0, 640); ram_resource(dev, idx++, 768, tolmk - 768); -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES /* Leave some space for ACPI, PIRQ and MP tables */ high_tables_base = (tomk * 1024) - HIGH_MEMORY_SIZE; high_tables_size = HIGH_MEMORY_SIZE; diff --git a/src/northbridge/intel/i82810/northbridge.c b/src/northbridge/intel/i82810/northbridge.c index 3434c6d71b..78e37285f7 100644 --- a/src/northbridge/intel/i82810/northbridge.c +++ b/src/northbridge/intel/i82810/northbridge.c @@ -83,7 +83,7 @@ static int translate_i82810_to_mb[] = { /* MB */0, 8, 0, 16, 16, 24, 32, 32, 48, 64, 64, 96, 128, 128, 192, 256, }; -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES #include <cbmem.h> #endif @@ -147,7 +147,7 @@ static void pci_domain_set_resources(device_t dev) ram_resource(dev, idx++, 0, 640); ram_resource(dev, idx++, 768, tolmk - 768); -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES /* Leave some space for ACPI, PIRQ and MP tables */ high_tables_base = (tomk * 1024) - HIGH_MEMORY_SIZE; high_tables_size = HIGH_MEMORY_SIZE; diff --git a/src/northbridge/intel/i82830/northbridge.c b/src/northbridge/intel/i82830/northbridge.c index dea05db137..93bdc28196 100644 --- a/src/northbridge/intel/i82830/northbridge.c +++ b/src/northbridge/intel/i82830/northbridge.c @@ -64,7 +64,7 @@ int add_northbridge_resources(struct lb_memory *mem) return 0; } -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES #include <cbmem.h> #endif static void pci_domain_set_resources(device_t dev) @@ -116,7 +116,7 @@ static void pci_domain_set_resources(device_t dev) assign_resources(dev->link_list); -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES /* Leave some space for ACPI, PIRQ and MP tables */ high_tables_base = (tomk * 1024) - HIGH_MEMORY_SIZE; high_tables_size = HIGH_MEMORY_SIZE; diff --git a/src/northbridge/intel/i855/northbridge.c b/src/northbridge/intel/i855/northbridge.c index 53f599715b..b59ba50a8b 100644 --- a/src/northbridge/intel/i855/northbridge.c +++ b/src/northbridge/intel/i855/northbridge.c @@ -53,7 +53,7 @@ static const struct pci_driver northbridge_driver __pci_driver = { .device = 0x3580, }; -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES #include <cbmem.h> #endif static void pci_domain_set_resources(device_t dev) @@ -109,7 +109,7 @@ static void pci_domain_set_resources(device_t dev) /* ram_resource(dev, idx++, 1024, tolmk - 1024); */ ram_resource(dev, idx++, 768, tolmk - 768); -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES /* Leave some space for ACPI, PIRQ and MP tables */ high_tables_base = (tomk * 1024) - HIGH_MEMORY_SIZE; high_tables_size = HIGH_MEMORY_SIZE; diff --git a/src/northbridge/intel/i945/northbridge.c b/src/northbridge/intel/i945/northbridge.c index a10bb4a6f1..40b1aaac96 100644 --- a/src/northbridge/intel/i945/northbridge.c +++ b/src/northbridge/intel/i945/northbridge.c @@ -93,7 +93,7 @@ static void add_fixed_resources(struct device *dev, int index) } } -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES #include <cbmem.h> #endif @@ -181,7 +181,7 @@ static void pci_domain_set_resources(device_t dev) assign_resources(dev->link_list); -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES /* Leave some space for ACPI, PIRQ and MP tables */ high_tables_base = (tomk * 1024) - HIGH_MEMORY_SIZE; high_tables_size = HIGH_MEMORY_SIZE; diff --git a/src/northbridge/intel/sandybridge/northbridge.c b/src/northbridge/intel/sandybridge/northbridge.c index b1f7c72132..b2baaa3d4e 100644 --- a/src/northbridge/intel/sandybridge/northbridge.c +++ b/src/northbridge/intel/sandybridge/northbridge.c @@ -143,7 +143,7 @@ static void add_fixed_resources(struct device *dev, int index) } } -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES #include <cbmem.h> #endif @@ -267,7 +267,7 @@ static void pci_domain_set_resources(device_t dev) assign_resources(dev->link_list); -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES /* Leave some space for ACPI, PIRQ and MP tables */ high_tables_base = (tomk * 1024) - HIGH_MEMORY_SIZE; high_tables_size = HIGH_MEMORY_SIZE; diff --git a/src/northbridge/intel/sch/northbridge.c b/src/northbridge/intel/sch/northbridge.c index 7b7c67b8fc..57245b6bed 100644 --- a/src/northbridge/intel/sch/northbridge.c +++ b/src/northbridge/intel/sch/northbridge.c @@ -105,7 +105,7 @@ static void add_fixed_resources(struct device *dev, int index) IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED; } -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES #include <cbmem.h> #endif @@ -192,7 +192,7 @@ static void pci_domain_set_resources(device_t dev) assign_resources(dev->link_list); -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES /* Leave some space for ACPI, PIRQ and MP tables. */ high_tables_base = (tomk * 1024) - HIGH_MEMORY_SIZE; high_tables_size = HIGH_MEMORY_SIZE; diff --git a/src/northbridge/rdc/r8610/northbridge.c b/src/northbridge/rdc/r8610/northbridge.c index 48d830cddf..250ace01ac 100644 --- a/src/northbridge/rdc/r8610/northbridge.c +++ b/src/northbridge/rdc/r8610/northbridge.c @@ -32,7 +32,7 @@ #include <smbios.h> #include "chip.h" -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES #include <cbmem.h> #endif @@ -69,7 +69,7 @@ static void cpu_pci_domain_set_resources(device_t dev) ram_resource(dev, idx++, 0, 640); ram_resource(dev, idx++, 768, tolmk - 768); -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES /* Leave some space for ACPI, PIRQ and MP tables */ high_tables_base = (tomk * 1024) - HIGH_MEMORY_SIZE; high_tables_size = HIGH_MEMORY_SIZE; diff --git a/src/northbridge/via/cn400/northbridge.c b/src/northbridge/via/cn400/northbridge.c index 2cc331b24d..74e0edff53 100644 --- a/src/northbridge/via/cn400/northbridge.c +++ b/src/northbridge/via/cn400/northbridge.c @@ -177,7 +177,7 @@ static void ram_reservation(device_t dev, unsigned long index, } #endif -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES #include <cbmem.h> #endif @@ -207,7 +207,7 @@ static void cn400_domain_set_resources(device_t dev) tolmk = tomk; } -#if CONFIG_WRITE_HIGH_TABLES == 1 +#if CONFIG_WRITE_HIGH_TABLES /* Locate the High Tables at the Top of Low Memory below the Video RAM */ high_tables_base = ((tolmk - (CONFIG_VIDEO_MB *1024)) * 1024) - HIGH_MEMORY_SIZE; high_tables_size = HIGH_MEMORY_SIZE; diff --git a/src/northbridge/via/cn700/northbridge.c b/src/northbridge/via/cn700/northbridge.c index 6400e223ba..ced4c2f740 100644 --- a/src/northbridge/via/cn700/northbridge.c +++ b/src/northbridge/via/cn700/northbridge.c @@ -97,7 +97,7 @@ static const struct pci_driver memctrl_driver __pci_driver = { .device = PCI_DEVICE_ID_VIA_CN700_MEMCTRL, }; -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES #include <cbmem.h> #endif @@ -138,7 +138,7 @@ static void pci_domain_set_resources(device_t dev) tolmk = tomk; } -#if CONFIG_WRITE_HIGH_TABLES == 1 +#if CONFIG_WRITE_HIGH_TABLES high_tables_base = ((tolmk - CONFIG_VIDEO_MB * 1024) * 1024) - HIGH_MEMORY_SIZE; high_tables_size = HIGH_MEMORY_SIZE; printk(BIOS_DEBUG, "tom: %lx, high_tables_base: %llx, high_tables_size: %llx\n", diff --git a/src/northbridge/via/cx700/northbridge.c b/src/northbridge/via/cx700/northbridge.c index 9e302983c2..4fca723472 100644 --- a/src/northbridge/via/cx700/northbridge.c +++ b/src/northbridge/via/cx700/northbridge.c @@ -32,7 +32,7 @@ #include "chip.h" #include "northbridge.h" -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES #include <cbmem.h> #endif @@ -74,7 +74,7 @@ static void pci_domain_set_resources(device_t dev) tolmk -= 1024; // TOP 1M SM Memory } -#if CONFIG_WRITE_HIGH_TABLES == 1 +#if CONFIG_WRITE_HIGH_TABLES high_tables_base = (tolmk * 1024) - HIGH_MEMORY_SIZE; high_tables_size = HIGH_MEMORY_SIZE; printk(BIOS_DEBUG, "tom: %lx, high_tables_base: %llx, high_tables_size: %llx\n", diff --git a/src/northbridge/via/vt8601/northbridge.c b/src/northbridge/via/vt8601/northbridge.c index 3a7ada51fb..92adf3206f 100644 --- a/src/northbridge/via/vt8601/northbridge.c +++ b/src/northbridge/via/vt8601/northbridge.c @@ -45,7 +45,7 @@ static const struct pci_driver northbridge_driver __pci_driver = { .device = 0x0601, /* 0x8601 is the AGP bridge? */ }; -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES #include <cbmem.h> #endif @@ -89,7 +89,7 @@ static void pci_domain_set_resources(device_t dev) tolmk = tomk; } -#if CONFIG_WRITE_HIGH_TABLES == 1 +#if CONFIG_WRITE_HIGH_TABLES high_tables_base = (tolmk * 1024) - HIGH_MEMORY_SIZE; high_tables_size = HIGH_MEMORY_SIZE; printk(BIOS_DEBUG, "tom: %lx, high_tables_base: %llx, high_tables_size: %llx\n", diff --git a/src/northbridge/via/vt8623/northbridge.c b/src/northbridge/via/vt8623/northbridge.c index 19f14d56a4..5ea2212993 100644 --- a/src/northbridge/via/vt8623/northbridge.c +++ b/src/northbridge/via/vt8623/northbridge.c @@ -105,7 +105,7 @@ static const struct pci_driver agp_driver __pci_driver = { .device = PCI_DEVICE_ID_VIA_8633_1, }; -#if CONFIG_WRITE_HIGH_TABLES==1 +#if CONFIG_WRITE_HIGH_TABLES #include <cbmem.h> #endif @@ -149,7 +149,7 @@ static void pci_domain_set_resources(device_t dev) tolmk = tomk; } -#if CONFIG_WRITE_HIGH_TABLES == 1 +#if CONFIG_WRITE_HIGH_TABLES high_tables_base = (tolmk * 1024) - HIGH_MEMORY_SIZE; high_tables_size = HIGH_MEMORY_SIZE; printk(BIOS_DEBUG, "tom: %lx, high_tables_base: %llx, high_tables_size: %llx\n", diff --git a/src/northbridge/via/vx800/examples/chipset_init.c b/src/northbridge/via/vx800/examples/chipset_init.c index 5e82262d9d..f4798c952d 100644 --- a/src/northbridge/via/vx800/examples/chipset_init.c +++ b/src/northbridge/via/vx800/examples/chipset_init.c @@ -18,7 +18,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME #include <arch/acpi.h> #endif #include "../vx800.h" @@ -607,7 +607,7 @@ void init_VIA_chipset(void) void hardwaremain(int boot_complete) { struct lb_memory *lb_mem; -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME void *wake_vec; #endif diff --git a/src/southbridge/amd/amd8111/acpi.c b/src/southbridge/amd/amd8111/acpi.c index d5b1c1891c..df57a7e2af 100644 --- a/src/southbridge/amd/amd8111/acpi.c +++ b/src/southbridge/amd/amd8111/acpi.c @@ -89,7 +89,7 @@ static int lsmbus_block_write(device_t dev, uint8_t cmd, u8 bytes, const u8 *buf } -#if CONFIG_GENERATE_ACPI_TABLES == 1 +#if CONFIG_GENERATE_ACPI_TABLES unsigned pm_base; #endif @@ -162,7 +162,7 @@ static void acpi_init(struct device *dev) (on*12)+(on>>1),(on&1)*5); } -#if CONFIG_GENERATE_ACPI_TABLES == 1 +#if CONFIG_GENERATE_ACPI_TABLES pm_base = pci_read_config16(dev, 0x58) & 0xff00; printk(BIOS_DEBUG, "pm_base: 0x%04x\n",pm_base); #endif diff --git a/src/southbridge/amd/cimx/sb700/bootblock.c b/src/southbridge/amd/cimx/sb700/bootblock.c index 401c039165..ce7707bd07 100644 --- a/src/southbridge/amd/cimx/sb700/bootblock.c +++ b/src/southbridge/amd/cimx/sb700/bootblock.c @@ -22,7 +22,7 @@ #include <arch/romcc_io.h> -#if CONFIG_CONSOLE_POST == 1 +#if CONFIG_CONSOLE_POST /* Data */ #define UART_RBR 0x00 diff --git a/src/southbridge/amd/cimx/sb700/early.c b/src/southbridge/amd/cimx/sb700/early.c index c899320c48..3f647c8847 100644 --- a/src/southbridge/amd/cimx/sb700/early.c +++ b/src/southbridge/amd/cimx/sb700/early.c @@ -31,7 +31,7 @@ #include "smbus.h" -#if CONFIG_RAMINIT_SYSINFO == 1 +#if CONFIG_RAMINIT_SYSINFO /** * @brief Get SouthBridge device number * @param[in] bus target bus number diff --git a/src/southbridge/amd/cimx/sb700/sb_cimx.h b/src/southbridge/amd/cimx/sb700/sb_cimx.h index 632e4cdcd5..8e62048d2e 100644 --- a/src/southbridge/amd/cimx/sb700/sb_cimx.h +++ b/src/southbridge/amd/cimx/sb700/sb_cimx.h @@ -40,7 +40,7 @@ void sb_Late_Post(void); void sb7xx_51xx_enable_wideio(u8 wio_index, u16 base); void sb7xx_51xx_disable_wideio(u8 wio_index); -#if CONFIG_RAMINIT_SYSINFO == 1 +#if CONFIG_RAMINIT_SYSINFO /** * @brief Get SouthBridge device number, called by finalize_node_setup() * @param[in] bus target bus number diff --git a/src/southbridge/amd/cimx/sb800/SBPLATFORM.h b/src/southbridge/amd/cimx/sb800/SBPLATFORM.h index 7dc752a6cb..22d7724890 100644 --- a/src/southbridge/amd/cimx/sb800/SBPLATFORM.h +++ b/src/southbridge/amd/cimx/sb800/SBPLATFORM.h @@ -158,7 +158,7 @@ typedef union _PCI_ADDR { #include "vendorcode/amd/cimx/sb800/AMDSBLIB.h" -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME #include "spi.h" #endif diff --git a/src/southbridge/amd/cimx/sb800/cfg.c b/src/southbridge/amd/cimx/sb800/cfg.c index 2b7315559a..71fea672d5 100644 --- a/src/southbridge/amd/cimx/sb800/cfg.c +++ b/src/southbridge/amd/cimx/sb800/cfg.c @@ -26,7 +26,7 @@ #include <arch/io.h> #include <arch/acpi.h> -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME int acpi_get_sleep_type(void) { u16 tmp = inw(PM1_CNT_BLK_ADDRESS); @@ -75,7 +75,7 @@ void sb800_cimx_config(AMDSBCFG *sb_config) if (!sb_config) return; -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME if (acpi_get_sleep_type() == 3) sb_config->S3Resume = 1; #endif diff --git a/src/southbridge/amd/cimx/sb800/early.c b/src/southbridge/amd/cimx/sb800/early.c index f692897dcc..c0f85330f5 100644 --- a/src/southbridge/amd/cimx/sb800/early.c +++ b/src/southbridge/amd/cimx/sb800/early.c @@ -30,7 +30,7 @@ #include "cbmem.h" -#if CONFIG_RAMINIT_SYSINFO == 1 +#if CONFIG_RAMINIT_SYSINFO /** * @brief Get SouthBridge device number * @param[in] bus target bus number @@ -82,7 +82,7 @@ void sb800_clk_output_48Mhz(void) *(volatile u32 *)(ACPI_MMIO_BASE + MISC_BASE + 0x40) |= 1 << 1; /* 48Mhz */ } -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME int acpi_is_wakeup_early(void) { return (acpi_get_sleep_type() == 3); diff --git a/src/southbridge/amd/cimx/sb800/late.c b/src/southbridge/amd/cimx/sb800/late.c index c69782bc62..0ce82b3307 100644 --- a/src/southbridge/amd/cimx/sb800/late.c +++ b/src/southbridge/amd/cimx/sb800/late.c @@ -161,7 +161,7 @@ static const struct pci_driver raid5_driver __pci_driver = { .device = PCI_DEVICE_ID_ATI_SB800_SATA_RAID5, }; -#if CONFIG_USBDEBUG == 1 +#if CONFIG_USBDEBUG static void usb_set_resources(struct device *dev) { struct resource *res; @@ -480,7 +480,7 @@ static void sb800_enable(device_t dev) /* call the CIMX entry at the last sb800 device, * so make sure the mainboard devicetree is complete */ -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME if (acpi_slp_type != 3) sb_Before_Pci_Init(); else diff --git a/src/southbridge/amd/cimx/sb800/sb_cimx.h b/src/southbridge/amd/cimx/sb800/sb_cimx.h index 5e510de519..9916c8139b 100644 --- a/src/southbridge/amd/cimx/sb800/sb_cimx.h +++ b/src/southbridge/amd/cimx/sb800/sb_cimx.h @@ -40,7 +40,7 @@ int acpi_is_wakeup_early(void); */ void sb800_clk_output_48Mhz(void); -#if CONFIG_RAMINIT_SYSINFO == 1 +#if CONFIG_RAMINIT_SYSINFO /** * @brief Get SouthBridge device number, called by finalize_node_setup() * @param[in] bus target bus number diff --git a/src/southbridge/amd/cimx/sb900/bootblock.c b/src/southbridge/amd/cimx/sb900/bootblock.c index e84743bc20..61c3c3e928 100644 --- a/src/southbridge/amd/cimx/sb900/bootblock.c +++ b/src/southbridge/amd/cimx/sb900/bootblock.c @@ -22,7 +22,7 @@ #include <arch/romcc_io.h> -#if CONFIG_CONSOLE_POST == 1 +#if CONFIG_CONSOLE_POST /* Data */ #define UART_RBR 0x00 diff --git a/src/southbridge/amd/cs5530/vga.c b/src/southbridge/amd/cs5530/vga.c index 4a26251084..56bea45ad5 100644 --- a/src/southbridge/amd/cs5530/vga.c +++ b/src/southbridge/amd/cs5530/vga.c @@ -41,7 +41,7 @@ #include <cpu/amd/gx1def.h> #include <delay.h> -#if CONFIG_GX1_VIDEO == 1 +#if CONFIG_GX1_VIDEO /* * Some register descriptions that are no listed in cpu/amd/gx1def.h */ @@ -397,7 +397,7 @@ static void cs5530_activate_video(u32 io_base, const struct video_mode *mode) write32(io_base + CS5530_DISPLAY_CONFIG, val | 0x0020002F); } -#if CONFIG_SPLASH_GRAPHIC == 1 +#if CONFIG_SPLASH_GRAPHIC /* * This bitmap file must provide: diff --git a/src/southbridge/amd/rs690/ht.c b/src/southbridge/amd/rs690/ht.c index 5d816e59f4..9eb47bbdc5 100644 --- a/src/southbridge/amd/rs690/ht.c +++ b/src/southbridge/amd/rs690/ht.c @@ -27,7 +27,7 @@ static void ht_dev_set_resources(device_t dev) { -#if CONFIG_EXT_CONF_SUPPORT == 1 +#if CONFIG_EXT_CONF_SUPPORT unsigned reg; device_t k8_f1; resource_t rbase, rend; @@ -86,7 +86,7 @@ static void ht_dev_set_resources(device_t dev) static void ht_dev_read_resources(device_t dev) { -#if CONFIG_EXT_CONF_SUPPORT == 1 +#if CONFIG_EXT_CONF_SUPPORT struct resource *res; printk(BIOS_DEBUG,"%s %s\n", dev_path(dev), __func__); @@ -95,7 +95,7 @@ static void ht_dev_read_resources(device_t dev) pci_dev_read_resources(dev); -#if CONFIG_EXT_CONF_SUPPORT == 1 +#if CONFIG_EXT_CONF_SUPPORT /* Add an MMCONFIG resource. */ res = new_resource(dev, 0x1C); res->base = EXT_CONF_BASE_ADDRESS; diff --git a/src/southbridge/amd/rs780/early_setup.c b/src/southbridge/amd/rs780/early_setup.c index 8adf1f6a75..0540823f16 100644 --- a/src/southbridge/amd/rs780/early_setup.c +++ b/src/southbridge/amd/rs780/early_setup.c @@ -101,7 +101,7 @@ static void set_nbcfg_enable_bits(device_t nb_dev, u32 reg_pos, u32 mask, } } /* family 10 only, for reg > 0xFF */ -#if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 == 1 +#if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 static void set_fam10_ext_cfg_enable_bits(device_t fam10_dev, u32 reg_pos, u32 mask, u32 val) { diff --git a/src/southbridge/amd/rs780/gfx.c b/src/southbridge/amd/rs780/gfx.c index 29a63943bc..e8d4596adf 100644 --- a/src/southbridge/amd/rs780/gfx.c +++ b/src/southbridge/amd/rs780/gfx.c @@ -659,7 +659,7 @@ static void internal_gfx_pci_dev_init(struct device *dev) pointer = (u32 *)&vgainfo; for(i=0; i<sizeof(ATOM_INTEGRATED_SYSTEM_INFO_V2); i+=4) { -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA *GpuF0MMReg = 0x80000000 + uma_memory_size - 512 + i; #else *GpuF0MMReg = 0x80000000 + 0x8000000 - 512 + i; @@ -775,7 +775,7 @@ static void rs780_internal_gfx_enable(device_t dev) device_t nb_dev = dev_find_slot(0, 0); msr_t sysmem; -#if (CONFIG_GFXUMA == 0) +#if !CONFIG_GFXUMA u32 FB_Start, FB_End; #endif @@ -818,7 +818,7 @@ static void rs780_internal_gfx_enable(device_t dev) set_nbmc_enable_bits(nb_dev, 0x25, 0xffffffff, 0x111f111f); set_htiu_enable_bits(nb_dev, 0x37, 1<<24, 1<<24); -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA /* GFX_InitUMA. */ /* Copy CPU DDR Controller to NB MC. */ device_t k8_f1 = dev_find_slot(0, PCI_DEVFN(0x18, 1)); diff --git a/src/southbridge/amd/rs780/rs780.c b/src/southbridge/amd/rs780/rs780.c index 717aeab2c6..9b153aae1b 100644 --- a/src/southbridge/amd/rs780/rs780.c +++ b/src/southbridge/amd/rs780/rs780.c @@ -220,7 +220,7 @@ static void rs780_nb_gfx_dev_table(device_t nb_dev, device_t dev) /* Program Straps. */ romstrap2 = 1 << 26; // enables audio function -#if (CONFIG_GFXUMA == 1) +#if CONFIG_GFXUMA extern uint64_t uma_memory_size; // bits 7-9: aperture size // 0-7: 128mb, 256mb, 64mb, 32mb, 512mb, 1g, 2g, 4g diff --git a/src/southbridge/amd/sb600/ide.c b/src/southbridge/amd/sb600/ide.c index e38e83fdd7..3fa31eab30 100644 --- a/src/southbridge/amd/sb600/ide.c +++ b/src/southbridge/amd/sb600/ide.c @@ -45,7 +45,7 @@ static void ide_init(struct device *dev) dword |= 1 << 2; pci_write_config16(dev, 0x4, dword); -#if CONFIG_PCI_ROM_RUN == 1 +#if CONFIG_PCI_ROM_RUN pci_dev_init(dev); #endif diff --git a/src/southbridge/amd/sb700/early_setup.c b/src/southbridge/amd/sb700/early_setup.c index 2dc84d84bc..c890ad90d3 100644 --- a/src/southbridge/amd/sb700/early_setup.c +++ b/src/southbridge/amd/sb700/early_setup.c @@ -715,7 +715,7 @@ int s3_load_nvram_early(int size, u32 *old_dword, int nvram_pos) return nvram_pos; } -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME int acpi_is_wakeup_early(void) { u16 tmp; diff --git a/src/southbridge/amd/sb700/ide.c b/src/southbridge/amd/sb700/ide.c index 5f415fb9f2..19d4ed5d6a 100644 --- a/src/southbridge/amd/sb700/ide.c +++ b/src/southbridge/amd/sb700/ide.c @@ -60,7 +60,7 @@ static void ide_init(struct device *dev) pci_write_config8(sm_dev, 0xAD, byte); } -#if CONFIG_PCI_ROM_RUN == 1 +#if CONFIG_PCI_ROM_RUN pci_dev_init(dev); #endif } diff --git a/src/southbridge/amd/sb700/lpc.c b/src/southbridge/amd/sb700/lpc.c index 5dd7d696aa..c968927854 100644 --- a/src/southbridge/amd/sb700/lpc.c +++ b/src/southbridge/amd/sb700/lpc.c @@ -73,7 +73,7 @@ static void lpc_init(device_t dev) /* hack, but the whole sb700 startup lacks any device which is doing the acpi init */ -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME { extern u8 acpi_slp_type; u16 tmp = inw(ACPI_PM1_CNT_BLK); diff --git a/src/southbridge/amd/sb700/sb700.h b/src/southbridge/amd/sb700/sb700.h index 165c72d52b..d358ee8054 100644 --- a/src/southbridge/amd/sb700/sb700.h +++ b/src/southbridge/amd/sb700/sb700.h @@ -75,7 +75,7 @@ void sb7xx_51xx_setup_sata_phys(struct device *dev); #endif -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME int acpi_is_wakeup_early(void); #endif diff --git a/src/southbridge/amd/sb800/early_setup.c b/src/southbridge/amd/sb800/early_setup.c index 50f4ff70cd..a85f4902ca 100644 --- a/src/southbridge/amd/sb800/early_setup.c +++ b/src/southbridge/amd/sb800/early_setup.c @@ -665,7 +665,7 @@ int s3_load_nvram_early(int size, u32 *old_dword, int nvram_pos) return nvram_pos; } -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME static int acpi_is_wakeup_early(void) { u16 tmp; diff --git a/src/southbridge/amd/sb800/ide.c b/src/southbridge/amd/sb800/ide.c index eb287f2cb2..a63878b41d 100644 --- a/src/southbridge/amd/sb800/ide.c +++ b/src/southbridge/amd/sb800/ide.c @@ -58,7 +58,7 @@ static void ide_init(struct device *dev) pci_write_config8(dev, 0xAD, byte); } -#if CONFIG_PCI_ROM_RUN == 1 +#if CONFIG_PCI_ROM_RUN pci_dev_init(dev); #endif } diff --git a/src/southbridge/broadcom/bcm5780/nic.c b/src/southbridge/broadcom/bcm5780/nic.c index 387c402215..0fa9a4e0d5 100644 --- a/src/southbridge/broadcom/bcm5780/nic.c +++ b/src/southbridge/broadcom/bcm5780/nic.c @@ -26,7 +26,7 @@ static void nic_init(struct device *dev) { -#if CONFIG_PCI_ROM_RUN == 1 +#if CONFIG_PCI_ROM_RUN pci_dev_init(dev);// it will init option rom #endif diff --git a/src/southbridge/intel/i82371eb/smbus.c b/src/southbridge/intel/i82371eb/smbus.c index 65af02abb0..b4d949376c 100644 --- a/src/southbridge/intel/i82371eb/smbus.c +++ b/src/southbridge/intel/i82371eb/smbus.c @@ -31,7 +31,7 @@ #include "i82371eb.h" #include "smbus.h" -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME extern u8 acpi_slp_type; int acpi_get_sleep_type(void); #endif @@ -92,7 +92,7 @@ static void pwrmgt_enable(struct device *dev) outw(0xffff, DEFAULT_PMBASE + GLBSTS); outl(0xffffffff, DEFAULT_PMBASE + DEVSTS); -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME /* this reads PMCNTRL, so we have to call it before writing the * default value */ acpi_slp_type = acpi_get_sleep_type(); diff --git a/src/southbridge/nvidia/ck804/early_setup.c b/src/southbridge/nvidia/ck804/early_setup.c index dfe9ff2233..505d059c05 100644 --- a/src/southbridge/nvidia/ck804/early_setup.c +++ b/src/southbridge/nvidia/ck804/early_setup.c @@ -82,7 +82,7 @@ static void setup_ss_table(unsigned index, unsigned where, unsigned control, #define CK804_DEVN_BASE CONFIG_HT_CHAIN_UNITID_BASE #endif -#if CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1 +#if CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY #define CK804B_DEVN_BASE 1 #else #define CK804B_DEVN_BASE CK804_DEVN_BASE diff --git a/src/southbridge/nvidia/ck804/early_setup_car.c b/src/southbridge/nvidia/ck804/early_setup_car.c index bb0fd13d18..efe1b99ce4 100644 --- a/src/southbridge/nvidia/ck804/early_setup_car.c +++ b/src/southbridge/nvidia/ck804/early_setup_car.c @@ -72,7 +72,7 @@ static void setup_ss_table(unsigned index, unsigned where, unsigned control, #define CK804_DEVN_BASE CONFIG_HT_CHAIN_UNITID_BASE #endif -#if CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1 +#if CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY #define CK804B_DEVN_BASE 1 #else #define CK804B_DEVN_BASE CK804_DEVN_BASE diff --git a/src/southbridge/nvidia/ck804/ide.c b/src/southbridge/nvidia/ck804/ide.c index ac94acbbed..c7236ec635 100644 --- a/src/southbridge/nvidia/ck804/ide.c +++ b/src/southbridge/nvidia/ck804/ide.c @@ -60,7 +60,7 @@ static void ide_init(struct device *dev) dword |= 12; pci_write_config32(dev, 0xf8, dword); -#if CONFIG_PCI_ROM_RUN == 1 +#if CONFIG_PCI_ROM_RUN pci_dev_init(dev); #endif } diff --git a/src/southbridge/nvidia/ck804/nic.c b/src/southbridge/nvidia/ck804/nic.c index ca6cd94caa..c62728addd 100644 --- a/src/southbridge/nvidia/ck804/nic.c +++ b/src/southbridge/nvidia/ck804/nic.c @@ -108,7 +108,7 @@ static void nic_init(struct device *dev) nic_index++; -#if CONFIG_PCI_ROM_RUN == 1 +#if CONFIG_PCI_ROM_RUN pci_dev_init(dev); /* It will init Option ROM. */ #endif } diff --git a/src/southbridge/nvidia/mcp55/ide.c b/src/southbridge/nvidia/mcp55/ide.c index 0677a75f58..6d0cebf193 100644 --- a/src/southbridge/nvidia/mcp55/ide.c +++ b/src/southbridge/nvidia/mcp55/ide.c @@ -61,7 +61,7 @@ static void ide_init(struct device *dev) dword = pci_read_config32(dev, 0xf8); dword |= 12; pci_write_config32(dev, 0xf8, dword); -#if CONFIG_PCI_ROM_RUN == 1 +#if CONFIG_PCI_ROM_RUN pci_dev_init(dev); #endif } diff --git a/src/southbridge/nvidia/mcp55/nic.c b/src/southbridge/nvidia/mcp55/nic.c index d74f10d247..0521b891aa 100644 --- a/src/southbridge/nvidia/mcp55/nic.c +++ b/src/southbridge/nvidia/mcp55/nic.c @@ -180,7 +180,7 @@ static void nic_init(struct device *dev) nic_index++; -#if CONFIG_PCI_ROM_RUN == 1 +#if CONFIG_PCI_ROM_RUN pci_dev_init(dev);// it will init option rom #endif diff --git a/src/southbridge/nvidia/mcp55/smbus.c b/src/southbridge/nvidia/mcp55/smbus.c index 3b11dd3633..a945f237d0 100644 --- a/src/southbridge/nvidia/mcp55/smbus.c +++ b/src/southbridge/nvidia/mcp55/smbus.c @@ -94,7 +94,7 @@ static struct smbus_bus_operations lops_smbus_bus = { .write_byte = lsmbus_write_byte, }; -#if CONFIG_GENERATE_ACPI_TABLES == 1 +#if CONFIG_GENERATE_ACPI_TABLES unsigned pm_base; #endif @@ -113,7 +113,7 @@ static void mcp55_sm_read_resources(device_t dev) static void mcp55_sm_init(device_t dev) { -#if CONFIG_GENERATE_ACPI_TABLES == 1 +#if CONFIG_GENERATE_ACPI_TABLES struct resource *res; res = find_resource(dev, 0x60); diff --git a/src/southbridge/sis/sis966/ide.c b/src/southbridge/sis/sis966/ide.c index 90ea002a5a..d067b5c77a 100644 --- a/src/southbridge/sis/sis966/ide.c +++ b/src/southbridge/sis/sis966/ide.c @@ -144,7 +144,7 @@ print_debug("IDE_INIT:---------->\n"); dword = pci_read_config32(dev, 0xf8); dword |= 12; pci_write_config32(dev, 0xf8, dword); -#if CONFIG_PCI_ROM_RUN == 1 +#if CONFIG_PCI_ROM_RUN pci_dev_init(dev); #endif diff --git a/src/southbridge/via/vt8237r/early_smbus.c b/src/southbridge/via/vt8237r/early_smbus.c index e25535bf0f..0c820c03c2 100644 --- a/src/southbridge/via/vt8237r/early_smbus.c +++ b/src/southbridge/via/vt8237r/early_smbus.c @@ -327,7 +327,7 @@ void enable_rom_decode(void) pci_write_config8(dev, 0x41, 0x7f); } -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME static int acpi_is_wakeup_early(void) { device_t dev; u16 tmp; diff --git a/src/southbridge/via/vt8237r/lpc.c b/src/southbridge/via/vt8237r/lpc.c index 7fc5b524fd..a47ab38a56 100644 --- a/src/southbridge/via/vt8237r/lpc.c +++ b/src/southbridge/via/vt8237r/lpc.c @@ -244,7 +244,7 @@ static void setup_pm(device_t dev) /* SCI is generated for RTC/pwrBtn/slpBtn. */ tmp = inw(VT8237R_ACPI_IO_BASE + 0x04); -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME acpi_slp_type = ((tmp & (7 << 10)) >> 10) == 1 ? 3 : 0 ; printk(BIOS_DEBUG, "SLP_TYP type was %x %x\n", tmp, acpi_slp_type); #endif diff --git a/src/superio/via/vt1211/vt1211.c b/src/superio/via/vt1211/vt1211.c index 1afa57e60d..e681d6eb9c 100644 --- a/src/superio/via/vt1211/vt1211.c +++ b/src/superio/via/vt1211/vt1211.c @@ -131,7 +131,7 @@ static void vt1211_pnp_set_resources(struct device *dev) { struct resource *res; -#if CONFIG_CONSOLE_SERIAL8250 == 1 +#if CONFIG_CONSOLE_SERIAL8250 /* TODO: Do the same for SP2? */ if (dev->path.pnp.device == VT1211_SP1) { for (res = dev->resource_list; res; res = res->next) { |