diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/northbridge/intel/sandybridge/raminit_native.c | 81 |
1 files changed, 45 insertions, 36 deletions
diff --git a/src/northbridge/intel/sandybridge/raminit_native.c b/src/northbridge/intel/sandybridge/raminit_native.c index 764ec38b37..7c7c5b2be6 100644 --- a/src/northbridge/intel/sandybridge/raminit_native.c +++ b/src/northbridge/intel/sandybridge/raminit_native.c @@ -609,47 +609,56 @@ static void dram_timing(ramctr_timing * ctrl) static void dram_freq(ramctr_timing * ctrl) { - u8 val2; - u32 reg1 = 0; - - /* Step 1 - Set target PCU frequency */ - - if (ctrl->tCK <= TCK_1066MHZ) { - ctrl->tCK = TCK_1066MHZ; - } else if (ctrl->tCK <= TCK_933MHZ) { - ctrl->tCK = TCK_933MHZ; - } else if (ctrl->tCK <= TCK_800MHZ) { - ctrl->tCK = TCK_800MHZ; - } else if (ctrl->tCK <= TCK_666MHZ) { - ctrl->tCK = TCK_666MHZ; - } else if (ctrl->tCK <= TCK_533MHZ) { - ctrl->tCK = TCK_533MHZ; - } else { + if (ctrl->tCK > TCK_400MHZ) { + printk (BIOS_ERR, "DRAM frequency is under lowest supported frequency (400 MHz). Increasing to 400 MHz as last resort"); ctrl->tCK = TCK_400MHZ; } + while (1) { + u8 val2; + u32 reg1 = 0; + + /* Step 1 - Set target PCU frequency */ + + if (ctrl->tCK <= TCK_1066MHZ) { + ctrl->tCK = TCK_1066MHZ; + } else if (ctrl->tCK <= TCK_933MHZ) { + ctrl->tCK = TCK_933MHZ; + } else if (ctrl->tCK <= TCK_800MHZ) { + ctrl->tCK = TCK_800MHZ; + } else if (ctrl->tCK <= TCK_666MHZ) { + ctrl->tCK = TCK_666MHZ; + } else if (ctrl->tCK <= TCK_533MHZ) { + ctrl->tCK = TCK_533MHZ; + } else if (ctrl->tCK <= TCK_400MHZ) { + ctrl->tCK = TCK_400MHZ; + } else { + die ("No lock frequency found"); + } - /* Frequency mulitplier. */ - u32 FRQ = get_FRQ(ctrl->tCK); + /* Frequency mulitplier. */ + u32 FRQ = get_FRQ(ctrl->tCK); - /* Step 2 - Select frequency in the MCU */ - reg1 = FRQ; - reg1 |= 0x80000000; // set running bit - MCHBAR32(0x5e00) = reg1; - while (reg1 & 0x80000000) { - printk(BIOS_DEBUG, " PLL busy..."); - reg1 = MCHBAR32(0x5e00); - } - printk(BIOS_DEBUG, "done\n"); - - /* Step 3 - Verify lock frequency */ - reg1 = MCHBAR32(0x5e04); - val2 = (u8) reg1; - if (val2 < FRQ) { - printk(BIOS_DEBUG, "Lock frequency is lower, recalculating\n"); - ctrl->tCK = 256000 / (val2 * BASEFREQ); + /* Step 2 - Select frequency in the MCU */ + reg1 = FRQ; + reg1 |= 0x80000000; // set running bit + MCHBAR32(0x5e00) = reg1; + while (reg1 & 0x80000000) { + printk(BIOS_DEBUG, " PLL busy..."); + reg1 = MCHBAR32(0x5e00); + } + printk(BIOS_DEBUG, "done\n"); + + /* Step 3 - Verify lock frequency */ + reg1 = MCHBAR32(0x5e04); + val2 = (u8) reg1; + if (val2 >= FRQ) { + printk(BIOS_DEBUG, "MCU frequency is set at : %d MHz\n", + (1000 << 8) / ctrl->tCK); + return; + } + printk(BIOS_DEBUG, "PLL didn't lock. Retrying at lower frequency\n"); + ctrl->tCK++; } - printk(BIOS_DEBUG, "MCU frequency is set at : %d MHz\n", - (1000 << 8) / ctrl->tCK); } static void dram_xover(ramctr_timing * ctrl) |