diff options
Diffstat (limited to 'src')
19 files changed, 1047 insertions, 1051 deletions
diff --git a/src/mainboard/Iwill/DK8X/cmos.layout b/src/mainboard/Iwill/DK8X/cmos.layout index 1ab6187288..0daae9221d 100644 --- a/src/mainboard/Iwill/DK8X/cmos.layout +++ b/src/mainboard/Iwill/DK8X/cmos.layout @@ -32,6 +32,7 @@ entries 395 1 e 1 hw_scrubber 396 1 e 1 interleave_chip_selects 397 2 e 8 max_mem_clock +399 1 e 2 dual_core 400 1 e 1 power_on_after_fail 412 4 e 6 debug_level 416 4 e 7 boot_first @@ -77,10 +78,10 @@ enumerations 7 9 Fallback_HDD 7 10 Fallback_Floppy #7 3 ROM -8 0 200Mhz -8 1 166Mhz -8 2 133Mhz -8 3 100Mhz +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz 9 0 off 9 1 87.5% 9 2 75.0% @@ -93,3 +94,5 @@ enumerations checksums checksum 392 983 984 + + diff --git a/src/mainboard/dell/s1850/chip.h b/src/mainboard/dell/s1850/chip.h index b00189f049..75dcaf49c1 100644 --- a/src/mainboard/dell/s1850/chip.h +++ b/src/mainboard/dell/s1850/chip.h @@ -1,5 +1,5 @@ -struct chip_operations mainboard_dell_s2850_ops; +struct chip_operations mainboard_dell_s1850_ops; -struct mainboard_dell_s2850_config { +struct mainboard_dell_s1850_config { int nothing; }; diff --git a/src/mainboard/dell/s1850/mainboard.c b/src/mainboard/dell/s1850/mainboard.c index d1b419df6c..b82e1b968d 100644 --- a/src/mainboard/dell/s1850/mainboard.c +++ b/src/mainboard/dell/s1850/mainboard.c @@ -6,7 +6,7 @@ #include <cpu/x86/msr.h> #include "chip.h" -struct chip_operations mainboard_dell_s2850_ops = { - CHIP_NAME("Dell S2850") +struct chip_operations mainboard_dell_s1850_ops = { + CHIP_NAME("Dell S1850") }; diff --git a/src/mainboard/emulation/qemu-i386/Config.lb b/src/mainboard/emulation/qemu-i386/Config.lb index 8b1e12010d..3b864a6e27 100644 --- a/src/mainboard/emulation/qemu-i386/Config.lb +++ b/src/mainboard/emulation/qemu-i386/Config.lb @@ -47,7 +47,7 @@ arch i386 end driver mainboard.o if HAVE_PIRQ_TABLE object irq_tables.o end -object reset.o +#object reset.o ## ## Romcc output diff --git a/src/mainboard/emulation/qemu-i386/cmos.layout b/src/mainboard/emulation/qemu-i386/cmos.layout index ea027282c4..5ba4c032c1 100644 --- a/src/mainboard/emulation/qemu-i386/cmos.layout +++ b/src/mainboard/emulation/qemu-i386/cmos.layout @@ -29,9 +29,6 @@ entries 386 1 e 1 ECC_memory 388 4 r 0 reboot_bits 392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock 400 1 e 1 power_on_after_fail 412 4 e 6 debug_level 416 4 e 7 boot_first @@ -39,15 +36,7 @@ entries 424 4 e 7 boot_third 428 4 h 0 boot_index 432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 reserved_memory - - +1008 16 h 0 check_sum enumerations @@ -77,21 +66,9 @@ enumerations 7 9 Fallback_HDD 7 10 Fallback_Floppy #7 3 ROM -8 0 200Mhz -8 1 166Mhz -8 2 133Mhz -8 3 100Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% checksums -checksum 392 983 984 +checksum 392 1007 1008 diff --git a/src/mainboard/intel/xe7501devkit/Config.lb b/src/mainboard/intel/xe7501devkit/Config.lb index 65ea45b566..2e1986369e 100644 --- a/src/mainboard/intel/xe7501devkit/Config.lb +++ b/src/mainboard/intel/xe7501devkit/Config.lb @@ -1,224 +1,224 @@ -##################################################################
-## BEGIN BOILERPLATE - DO NOT EDIT
-##
-## Compute the location and size of where this firmware image
-## (linuxBIOS plus payload) will live in the boot rom chip.
-##
-if USE_FALLBACK_IMAGE
-# The fallback image uses FALLBACK_SIZE bytes at the end of the ROM
-
- default ROM_SECTION_SIZE = FALLBACK_SIZE
- default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
-
-else
-# The normal image goes at the beginning of the LinuxBIOS ROM region
-# and uses all the remaining space
-
- default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
- default ROM_SECTION_OFFSET = 0
-end
-
-##
-## Compute where this copy of linuxBIOS will start in the boot rom
-##
-default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
-
-##
-## Compute a range of ROM that can cached to speed up linuxBIOS,
-## execution speed.
-##
-## XIP_ROM_SIZE must be a power of 2.
-## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
-default XIP_ROM_SIZE = 65536
-default XIP_ROM_BASE = ((( _ROMBASE + ROM_IMAGE_SIZE ) / XIP_ROM_SIZE ) * XIP_ROM_SIZE - XIP_ROM_SIZE )
-
-## END BOILERPLATE
-##################################################################
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if HAVE_MP_TABLE object mptable.o end
-if HAVE_PIRQ_TABLE object irq_tables.o end
-if HAVE_ACPI_TABLES object acpi_tables.o end
-object reset.o
-
-# Include the VGA option ROM, but only if we're compiled to use it
-if CONFIG_PCI_ROM_RUN
- if CONFIG_CONSOLE_VGA
- object vgarom.S
- else
- object no_vgarom.S
- end
-else
- object no_vgarom.S
-end
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ./romcc"
- action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ./romcc"
- action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
- action "./romcc -E -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
- action "./romcc -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit linuxBIOS entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where linuxBIOS is entered)
-##
-if HAVE_FALLBACK_BOOT
- if USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-else
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of linuxBIOS startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-
-if CONFIG_CHIP_NAME
- config chip.h
-end
-
-# based on sample config for tyan/s2735
-chip northbridge/intel/e7501
- device pci_domain 0 on
- device pci 0.0 on end # Chipset host controller
- device pci 0.1 on end # Host RASUM controller
- device pci 2.0 on # Hub interface B
- chip southbridge/intel/i82870 # P64H2
- device pci 1c.0 on end # IOAPIC - bus B
- device pci 1d.0 on end # Hub to PCI-B bridge
- device pci 1e.0 on end # IOAPIC - bus A
- device pci 1f.0 on end # Hub to PCI-A bridge
- end
- end
- device pci 3.0 off end # Hub interface C (82808AA connector - disable for now)
- device pci 4.0 on # Hub interface D
- chip southbridge/intel/i82870 # P64H2
- device pci 1c.0 on end # IOAPIC - bus B
- device pci 1d.0 on end # Hub to PCI-B bridge
- device pci 1e.0 on end # IOAPIC - bus A
- device pci 1f.0 on end # Hub to PCI-A bridge
- end
- end
- device pci 6.0 on end # E7501 Power management registers? (undocumented)
- chip southbridge/intel/i82801ca
- device pci 1d.0 off end # USB (might not work, Southbridge code needs looking at)
- device pci 1d.1 off end # USB (not populated)
- device pci 1d.2 off end # USB (not populated)
- device pci 1e.0 on # Hub to PCI bridge
+################################################################## +## BEGIN BOILERPLATE - DO NOT EDIT +## +## Compute the location and size of where this firmware image +## (linuxBIOS plus payload) will live in the boot rom chip. +## +if USE_FALLBACK_IMAGE +# The fallback image uses FALLBACK_SIZE bytes at the end of the ROM + + default ROM_SECTION_SIZE = FALLBACK_SIZE + default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) + +else +# The normal image goes at the beginning of the LinuxBIOS ROM region +# and uses all the remaining space + + default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) + default ROM_SECTION_OFFSET = 0 +end + +## +## Compute where this copy of linuxBIOS will start in the boot rom +## +default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) + +## +## Compute a range of ROM that can cached to speed up linuxBIOS, +## execution speed. +## +## XIP_ROM_SIZE must be a power of 2. +## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE +default XIP_ROM_SIZE = 65536 +default XIP_ROM_BASE = ((( _ROMBASE + ROM_IMAGE_SIZE ) / XIP_ROM_SIZE ) * XIP_ROM_SIZE - XIP_ROM_SIZE ) + +## END BOILERPLATE +################################################################## + +arch i386 end + +## +## Build the objects we have code for in this directory. +## + +driver mainboard.o +if HAVE_MP_TABLE object mptable.o end +if HAVE_PIRQ_TABLE object irq_tables.o end +if HAVE_ACPI_TABLES object acpi_tables.o end +object reset.o + +# Include the VGA option ROM, but only if we're compiled to use it +if CONFIG_PCI_ROM_RUN + if CONFIG_CONSOLE_VGA + object vgarom.S + else + object no_vgarom.S + end +else + object no_vgarom.S +end + +## +## Romcc output +## +makerule ./failover.E + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" +end + +makerule ./failover.inc + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" +end + +makerule ./auto.E + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -E -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" +end +makerule ./auto.inc + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" +end + +## +## Build our 16 bit and 32 bit linuxBIOS entry code +## +mainboardinit cpu/x86/16bit/entry16.inc +mainboardinit cpu/x86/32bit/entry32.inc +ldscript /cpu/x86/16bit/entry16.lds +ldscript /cpu/x86/32bit/entry32.lds + +## +## Build our reset vector (This is where linuxBIOS is entered) +## +if HAVE_FALLBACK_BOOT + if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds + else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds + end +else + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds +end + +### Should this be in the northbridge code? +mainboardinit arch/i386/lib/cpu_reset.inc + +## +## Include an id string (For safe flashing) +## +mainboardinit arch/i386/lib/id.inc +ldscript /arch/i386/lib/id.lds + +### +### This is the early phase of linuxBIOS startup +### Things are delicate and we test to see if we should +### failover to another image. +### +if USE_FALLBACK_IMAGE + ldscript /arch/i386/lib/failover.lds + mainboardinit ./failover.inc +end + +### +### O.k. We aren't just an intermediary anymore! +### + +## +## Setup RAM +## +mainboardinit cpu/x86/fpu/enable_fpu.inc +mainboardinit cpu/x86/mmx/enable_mmx.inc +mainboardinit cpu/x86/sse/enable_sse.inc +mainboardinit ./auto.inc +mainboardinit cpu/x86/sse/disable_sse.inc +mainboardinit cpu/x86/mmx/disable_mmx.inc + +## +## Include the secondary Configuration files +## +dir /pc80 + +if CONFIG_CHIP_NAME + config chip.h +end + +# based on sample config for tyan/s2735 +chip northbridge/intel/e7501 + device pci_domain 0 on + device pci 0.0 on end # Chipset host controller + device pci 0.1 on end # Host RASUM controller + device pci 2.0 on # Hub interface B + chip southbridge/intel/i82870 # P64H2 + device pci 1c.0 on end # IOAPIC - bus B + device pci 1d.0 on end # Hub to PCI-B bridge + device pci 1e.0 on end # IOAPIC - bus A + device pci 1f.0 on end # Hub to PCI-A bridge + end + end + device pci 3.0 off end # Hub interface C (82808AA connector - disable for now) + device pci 4.0 on # Hub interface D + chip southbridge/intel/i82870 # P64H2 + device pci 1c.0 on end # IOAPIC - bus B + device pci 1d.0 on end # Hub to PCI-B bridge + device pci 1e.0 on end # IOAPIC - bus A + device pci 1f.0 on end # Hub to PCI-A bridge + end + end + device pci 6.0 on end # E7501 Power management registers? (undocumented) + chip southbridge/intel/i82801ca + device pci 1d.0 off end # USB (might not work, Southbridge code needs looking at) + device pci 1d.1 off end # USB (not populated) + device pci 1d.2 off end # USB (not populated) + device pci 1e.0 on # Hub to PCI bridge chip drivers/pci/onboard # VGA ROM device pci 0.0 on end register "rom_address" = "_vgarom_start" - end
+ end end - device pci 1f.0 on # LPC bridge
- chip superio/smsc/lpc47b272
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.3 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.4 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.5 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.7 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1 # Keyboard interrupt
- irq 0x72 = 12 # Mouse interrupt
- end
- device pnp 2e.a off end # ACPI
- end
- end
- device pci 1f.1 on end # IDE
- device pci 1f.3 on end # SMBus
- device pci 1f.5 off end # AC97 Audio
- device pci 1f.6 off end # AC97 Modem
- end # SB
- end # PCI_DOMAIN
- device apic_cluster 0 on
- chip cpu/intel/socket_mPGA604_533Mhz
- device apic 0 on end
- end
- chip cpu/intel/socket_mPGA604_533Mhz
- device apic 6 on end
- end
- end
-end
+ device pci 1f.0 on # LPC bridge + chip superio/smsc/lpc47b272 + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.3 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.5 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.7 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # Keyboard interrupt + irq 0x72 = 12 # Mouse interrupt + end + device pnp 2e.a off end # ACPI + end + end + device pci 1f.1 on end # IDE + device pci 1f.3 on end # SMBus + device pci 1f.5 off end # AC97 Audio + device pci 1f.6 off end # AC97 Modem + end # SB + end # PCI_DOMAIN + device apic_cluster 0 on + chip cpu/intel/socket_mPGA604_533Mhz + device apic 0 on end + end + chip cpu/intel/socket_mPGA604_533Mhz + device apic 6 on end + end + end +end diff --git a/src/mainboard/intel/xe7501devkit/Options.lb b/src/mainboard/intel/xe7501devkit/Options.lb index b034ed6158..0b0588b2e6 100644 --- a/src/mainboard/intel/xe7501devkit/Options.lb +++ b/src/mainboard/intel/xe7501devkit/Options.lb @@ -1,234 +1,239 @@ -uses HAVE_MP_TABLE
-uses HAVE_ACPI_TABLES
-uses HAVE_PIRQ_TABLE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_OPTION_TABLE
-uses IRQ_SLOT_COUNT
-uses CONFIG_MAX_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_ROM_STREAM
-uses STACK_SIZE
-uses HEAP_SIZE
-uses USE_OPTION_TABLE
-uses LB_CKS_RANGE_START
-uses LB_CKS_RANGE_END
-uses LB_CKS_LOC
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-uses MAINBOARD
-uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses _RAMBASE
-uses TTYS0_BAUD
-uses TTYS0_BASE
-uses TTYS0_LCS
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses OBJCOPY
-uses CONFIG_CHIP_NAME
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses DEBUG
-uses CPU_OPT
-uses CONFIG_IDE
-
-## The default definitions are used for these
-uses CONFIG_ROM_STREAM_START
-uses PAYLOAD_SIZE
-
-## These are defined in target Config.lb, don't add here
-uses USE_FALLBACK_IMAGE
-uses ROM_SIZE
-uses ROM_IMAGE_SIZE
-uses FALLBACK_SIZE
-uses LINUXBIOS_EXTRA_VERSION
-
-## These are defined in mainboard Config.lb, don't add here
-uses ROM_SECTION_SIZE
-uses ROM_SECTION_OFFSET
-uses _ROMBASE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot?
-##
-default HAVE_FALLBACK_BOOT=0
-
-
-## Delay timer options
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default HAVE_PIRQ_TABLE=1
-default IRQ_SLOT_COUNT=12
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default HAVE_MP_TABLE=1
-
-## Build code to export ACPI tables?
-default HAVE_ACPI_TABLES=1
-
-##
-## Build code to export a CMOS option table?
-##
-default HAVE_OPTION_TABLE=0
-
-## CMOS checksum definitions (units == bytes)
-## These must match the checksum record in cmos.layout
-default LB_CKS_RANGE_START=128
-default LB_CKS_RANGE_END=130
-default LB_CKS_LOC=131
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-## NOTE: CONFIG_MAX_CPUS is the number of LOGICAL CPUs,
-## so if CONFIG_LOGICAL_CPUS is 1, CONFIG_MAX_CPUS should be 4.
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=2
-default CONFIG_LOGICAL_CPUS=0
-default CONFIG_MAX_PHYSICAL_CPUS=2
-
-# VGA Console
-# NOTE: to initialize VGA, need to copy the VGA option ROM from the factory BIOS
-# to VGA.rom
-default CONFIG_CONSOLE_VGA=0
-default CONFIG_PCI_ROM_RUN=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Motherboard identification
-##
-default MAINBOARD_PART_NUMBER="EIDXE7501DEVKIT"
-default MAINBOARD_VENDOR="Intel"
-default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x8086
-default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2480
-
-###
-### LinuxBIOS layout values
-###
-
-##
-## Use a small 8K stack
-##
-default STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default HEAP_SIZE=0x4000
-
-##
-## CMOS settings not currently supported due to conflicts with factory BIOS
-##
-default USE_OPTION_TABLE = 0
-
-##
-## LinuxBIOS C code runs at this location in RAM
-##
-default _RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_STREAM = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default TTYS0_BAUD=115200
-#default TTYS0_BAUD=57600
-#default TTYS0_BAUD=38400
-#default TTYS0_BAUD=19200
-#default TTYS0_BAUD=9600
-#default TTYS0_BAUD=4800
-#default TTYS0_BAUD=2400
-#default TTYS0_BAUD=1200
-
-# Select the serial console base port
-default TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default TTYS0_LCS=0x3
-
-##
-### Select the linuxBIOS loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-## Things we may not have
-default CONFIG_IDE=1
-
-default DEBUG=1
-default CPU_OPT="-g"
-default CONFIG_CHIP_NAME=1
-
-### End Options.lb
-end
+uses HAVE_MP_TABLE +uses HAVE_ACPI_TABLES +uses HAVE_PIRQ_TABLE +uses HAVE_FALLBACK_BOOT +uses HAVE_OPTION_TABLE +uses IRQ_SLOT_COUNT +uses CONFIG_MAX_CPUS +uses CONFIG_LOGICAL_CPUS +uses CONFIG_MAX_PHYSICAL_CPUS +uses CONFIG_IOAPIC +uses CONFIG_SMP +uses CONFIG_ROM_STREAM +uses STACK_SIZE +uses HEAP_SIZE +uses USE_OPTION_TABLE +uses LB_CKS_RANGE_START +uses LB_CKS_RANGE_END +uses LB_CKS_LOC +uses MAINBOARD_PART_NUMBER +uses MAINBOARD_VENDOR +uses MAINBOARD +uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses _RAMBASE +uses TTYS0_BAUD +uses TTYS0_BASE +uses TTYS0_LCS +uses DEFAULT_CONSOLE_LOGLEVEL +uses MAXIMUM_CONSOLE_LOGLEVEL +uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_CONSOLE_SERIAL8250 +uses CONFIG_UDELAY_TSC +uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 +uses HAVE_INIT_TIMER +uses CONFIG_GDB_STUB +uses CROSS_COMPILE +uses CC +uses HOSTCC +uses OBJCOPY +uses CONFIG_CHIP_NAME +uses CONFIG_CONSOLE_VGA +uses CONFIG_PCI_ROM_RUN +uses DEBUG +uses CPU_OPT +uses CONFIG_IDE + +## The default definitions are used for these +uses CONFIG_ROM_STREAM_START +uses PAYLOAD_SIZE + +## These are defined in target Config.lb, don't add here +uses USE_FALLBACK_IMAGE +uses ROM_SIZE +uses ROM_IMAGE_SIZE +uses FALLBACK_SIZE +uses LINUXBIOS_EXTRA_VERSION + +## These are defined in mainboard Config.lb, don't add here +uses ROM_SECTION_SIZE +uses ROM_SECTION_OFFSET +uses _ROMBASE +uses XIP_ROM_SIZE +uses XIP_ROM_BASE + +### +### Build options +### + +## +## ROM_SIZE is the size of boot ROM that this board will use. +## +default ROM_SIZE=2097152 + +## +## Build code for the fallback boot? +## +default HAVE_FALLBACK_BOOT=0 + + +## Delay timer options +## +default CONFIG_UDELAY_TSC=1 +default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 + +## +## Build code to export a programmable irq routing table +## +default HAVE_PIRQ_TABLE=1 +default IRQ_SLOT_COUNT=12 + +## +## Build code to export an x86 MP table +## Useful for specifying IRQ routing values +## +default HAVE_MP_TABLE=1 + +## Build code to export ACPI tables? +default HAVE_ACPI_TABLES=1 + +## +## Build code to export a CMOS option table? +## +default HAVE_OPTION_TABLE=0 + +## CMOS checksum definitions (units == bytes) +## These must match the checksum record in cmos.layout +default LB_CKS_RANGE_START=128 +default LB_CKS_RANGE_END=130 +default LB_CKS_LOC=131 + +## +## Build code for SMP support +## Only worry about 2 micro processors +## NOTE: CONFIG_MAX_CPUS is the number of LOGICAL CPUs, +## so if CONFIG_LOGICAL_CPUS is 1, CONFIG_MAX_CPUS should be 4. +## +default CONFIG_SMP=1 +default CONFIG_MAX_CPUS=2 +default CONFIG_LOGICAL_CPUS=0 +default CONFIG_MAX_PHYSICAL_CPUS=2 + +# VGA Console +# NOTE: to initialize VGA, need to copy the VGA option ROM from the factory BIOS +# to VGA.rom +default CONFIG_CONSOLE_VGA=0 +default CONFIG_PCI_ROM_RUN=0 + +## +## Build code to setup a generic IOAPIC +## +default CONFIG_IOAPIC=1 + +## +## Motherboard identification +## +default MAINBOARD_PART_NUMBER="EIDXE7501DEVKIT" +default MAINBOARD_VENDOR="Intel" +default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x8086 +default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2480 + +### +### LinuxBIOS layout values +### + +## +## Use a small 8K stack +## +default STACK_SIZE=0x2000 + +## +## Use a small 16K heap +## +default HEAP_SIZE=0x4000 + +## +## CMOS settings not currently supported due to conflicts with factory BIOS +## +default USE_OPTION_TABLE = 0 + +## +## LinuxBIOS C code runs at this location in RAM +## +default _RAMBASE=0x00004000 + +## +## Load the payload from the ROM +## +default CONFIG_ROM_STREAM = 1 + +### +### Defaults of options that you may want to override in the target config file +### + +## +## The default compiler +## +default CC="$(CROSS_COMPILE)gcc -m32" +default HOSTCC="gcc" + +## +## Disable the gdb stub by default +## +default CONFIG_GDB_STUB=0 + +## +## The Serial Console +## + +# To Enable the Serial Console +default CONFIG_CONSOLE_SERIAL8250=1 + +## Select the serial console baud rate +default TTYS0_BAUD=115200 +#default TTYS0_BAUD=57600 +#default TTYS0_BAUD=38400 +#default TTYS0_BAUD=19200 +#default TTYS0_BAUD=9600 +#default TTYS0_BAUD=4800 +#default TTYS0_BAUD=2400 +#default TTYS0_BAUD=1200 + +# Select the serial console base port +default TTYS0_BASE=0x3f8 + +# Select the serial protocol +# This defaults to 8 data bits, 1 stop bit, and no parity +default TTYS0_LCS=0x3 + +## +### Select the linuxBIOS loglevel +## +## EMERG 1 system is unusable +## ALERT 2 action must be taken immediately +## CRIT 3 critical conditions +## ERR 4 error conditions +## WARNING 5 warning conditions +## NOTICE 6 normal but significant condition +## INFO 7 informational +## DEBUG 8 debug-level messages +## SPEW 9 Way too many details + +## Request this level of debugging output +default DEFAULT_CONSOLE_LOGLEVEL=8 +## At a maximum only compile in this level of debugging +default MAXIMUM_CONSOLE_LOGLEVEL=8 + +## +## Select power on after power fail setting +default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" + +## Things we may not have +default CONFIG_IDE=1 + +default DEBUG=1 +default CPU_OPT="-g" +default CONFIG_CHIP_NAME=1 + +### End Options.lb +end diff --git a/src/mainboard/intel/xe7501devkit/acpi_tables.c b/src/mainboard/intel/xe7501devkit/acpi_tables.c index 94cdb871ef..7d1261c57f 100644 --- a/src/mainboard/intel/xe7501devkit/acpi_tables.c +++ b/src/mainboard/intel/xe7501devkit/acpi_tables.c @@ -1,118 +1,124 @@ -/*
- * Ported to Intel XE7501DEVKIT from Island Aruma
- * written by Stefan Reinauer <stepan@openbios.org>
- * (C) 2005 Stefan Reinauer
- * (C) 2005 Digital Design Corporation
- */
-
-#include <console/console.h>
-#include <string.h>
-#include <arch/acpi.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <assert.h>
-#include "bus.h"
-#include "ioapic.h"
-
-unsigned long acpi_dump_apics(unsigned long current)
-{
- unsigned int irq_start = 0;
- device_t dev = 0;
- struct resource* res = NULL;
-
-
- // SJM: Hard-code CPU LAPIC entries for now
- // Use SourcePoint numbering of processors
- current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 0, 6);
- current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 1, 7);
- current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 2, 0);
- current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 3, 1);
-
-
- // Southbridge IOAPIC
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_ICH3, 0xfec00000, irq_start);
- irq_start += INTEL_IOAPIC_NUM_INTERRUPTS;
-
- // P64H2#2 Bus A IOAPIC
- dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(30, 0));
- if (!dev)
- BUG(); // Config.lb error?
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_2_BUS_A, res->base, irq_start);
- irq_start += INTEL_IOAPIC_NUM_INTERRUPTS;
-
- // P64H2#2 Bus B IOAPIC
- dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(28, 0));
- if (!dev)
- BUG(); // Config.lb error?
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_2_BUS_B, res->base, irq_start);
- irq_start += INTEL_IOAPIC_NUM_INTERRUPTS;
-
-
- // P64H2#1 Bus A IOAPIC
- dev = dev_find_slot(PCI_BUS_E7501_HI_D, PCI_DEVFN(30, 0));
- if (!dev)
- BUG(); // Config.lb error?
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_1_BUS_A, res->base, irq_start);
- irq_start += INTEL_IOAPIC_NUM_INTERRUPTS;
-
- // P64H2#1 Bus B IOAPIC
- dev = dev_find_slot(PCI_BUS_E7501_HI_D, PCI_DEVFN(28, 0));
- if (!dev)
- BUG(); // Config.lb error?
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_1_BUS_B, res->base, irq_start);
- irq_start += INTEL_IOAPIC_NUM_INTERRUPTS;
-
- // Map ISA IRQ 0 to IRQ 2
- current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)current, 1, 0, 2, 0);
-
- // IRQ9 differs from ISA standard - ours is active high, level-triggered
- current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)current, 0, 9, 9, 0xD);
-
- return current;
-}
-
-
-unsigned long write_acpi_tables(unsigned long start)
-{
- unsigned long current;
- acpi_rsdp_t *rsdp;
- acpi_rsdt_t *rsdt;
- acpi_madt_t *madt;
-
- /* Align ACPI tables to 16byte */
- start = ( start + 0x0f ) & -0x10;
- current = start;
-
- printk_info("ACPI: Writing ACPI tables at %lx...\n", start);
-
- /* We need at least an RSDP and an RSDT Table */
- rsdp = (acpi_rsdp_t *) current;
- current += sizeof(acpi_rsdp_t);
- rsdt = (acpi_rsdt_t *) current;
- current += sizeof(acpi_rsdt_t);
-
- /* clear all table memory */
- memset((void *)start, 0, current - start);
-
- acpi_write_rsdp(rsdp, rsdt);
- acpi_write_rsdt(rsdt);
-
- /*
- * We explicitly add these tables later on:
- */
- /* QNX wants an MADT */
- printk_debug("ACPI: * MADT\n");
-
- madt = (acpi_madt_t *) current;
- acpi_create_madt(madt);
- current+=madt->header.length;
- acpi_add_table(rsdt,madt);
-
- printk_info("ACPI: done.\n");
- return current;
-}
-
+/* + * Ported to Intel XE7501DEVKIT from Agami Aruma + * written by Stefan Reinauer <stepan@openbios.org> + * (C) 2005 Stefan Reinauer + * (C) 2005 Digital Design Corporation + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <assert.h> +#include "bus.h" +#include "ioapic.h" + +unsigned long acpi_fill_srat(unsigned long current) +{ + // Not implemented + return 0; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + unsigned int irq_start = 0; + device_t dev = 0; + struct resource* res = NULL; + + + // SJM: Hard-code CPU LAPIC entries for now + // Use SourcePoint numbering of processors + current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 0, 6); + current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 1, 7); + current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 2, 0); + current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 3, 1); + + + // Southbridge IOAPIC + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_ICH3, 0xfec00000, irq_start); + irq_start += INTEL_IOAPIC_NUM_INTERRUPTS; + + // P64H2#2 Bus A IOAPIC + dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(30, 0)); + if (!dev) + BUG(); // Config.lb error? + res = find_resource(dev, PCI_BASE_ADDRESS_0); + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_2_BUS_A, res->base, irq_start); + irq_start += INTEL_IOAPIC_NUM_INTERRUPTS; + + // P64H2#2 Bus B IOAPIC + dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(28, 0)); + if (!dev) + BUG(); // Config.lb error? + res = find_resource(dev, PCI_BASE_ADDRESS_0); + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_2_BUS_B, res->base, irq_start); + irq_start += INTEL_IOAPIC_NUM_INTERRUPTS; + + + // P64H2#1 Bus A IOAPIC + dev = dev_find_slot(PCI_BUS_E7501_HI_D, PCI_DEVFN(30, 0)); + if (!dev) + BUG(); // Config.lb error? + res = find_resource(dev, PCI_BASE_ADDRESS_0); + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_1_BUS_A, res->base, irq_start); + irq_start += INTEL_IOAPIC_NUM_INTERRUPTS; + + // P64H2#1 Bus B IOAPIC + dev = dev_find_slot(PCI_BUS_E7501_HI_D, PCI_DEVFN(28, 0)); + if (!dev) + BUG(); // Config.lb error? + res = find_resource(dev, PCI_BASE_ADDRESS_0); + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_1_BUS_B, res->base, irq_start); + irq_start += INTEL_IOAPIC_NUM_INTERRUPTS; + + // Map ISA IRQ 0 to IRQ 2 + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)current, 1, 0, 2, 0); + + // IRQ9 differs from ISA standard - ours is active high, level-triggered + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)current, 0, 9, 9, 0xD); + + return current; +} + + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_madt_t *madt; + + /* Align ACPI tables to 16byte */ + start = ( start + 0x0f ) & -0x10; + current = start; + + printk_info("ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt); + acpi_write_rsdt(rsdt); + + /* + * We explicitly add these tables later on: + */ + /* QNX wants an MADT */ + printk_debug("ACPI: * MADT\n"); + + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current+=madt->header.length; + acpi_add_table(rsdt,madt); + + printk_info("ACPI: done.\n"); + return current; +} + diff --git a/src/mainboard/intel/xe7501devkit/auto.c b/src/mainboard/intel/xe7501devkit/auto.c index 8c635720af..1bd83a3187 100644 --- a/src/mainboard/intel/xe7501devkit/auto.c +++ b/src/mainboard/intel/xe7501devkit/auto.c @@ -1,92 +1,92 @@ -#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "southbridge/intel/i82801ca/i82801ca_early_smbus.c"
-#include "northbridge/intel/e7501/raminit.h"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/intel/e7501/debug.c"
-#include "superio/smsc/lpc47b272/lpc47b272_early_serial.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "cpu/x86/bist.h"
-
-#define SUPERIO_PORT 0x2e
-#define SERIAL_DEV PNP_DEV(SUPERIO_PORT, LPC47B272_SP1)
-
-static void hard_reset(void)
-{
- outb(0x0e, 0x0cf9);
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include "northbridge/intel/e7501/raminit.c"
-#include "northbridge/intel/e7501/reset_test.c"
-#include "sdram/generic_sdram.c"
-
-
-// This function MUST appear last (ROMCC limitation)
-static void main(unsigned long bist)
-{
- static const struct mem_controller memctrl[] = {
- {
- .d0 = PCI_DEV(0, 0, 0),
- .d0f1 = PCI_DEV(0, 0, 1),
- .channel0 = { (0xa<<3)|0, (0xa<<3)|1, (0xa<<3)|2, 0 },
- .channel1 = { (0xa<<3)|4, (0xa<<3)|5, (0xa<<3)|6, 0 },
- },
- };
-
- if (bist == 0)
- {
- // Skip this if there was a built in self test failure
-
- early_mtrr_init();
- enable_lapic();
- }
-
- // Get the serial port running and print a welcome banner
-
- lpc47b272_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
- // Halt if there was a built in self test failure
- report_bist_failure(bist);
-
-// print_pci_devices();
-
- // If this is a warm boot, some initialization can be skipped
-
- if (!bios_reset_detected())
- {
- enable_smbus();
-// dump_spd_registers(&memctrl[0]);
-// dump_smbus_registers();
-
-// memreset_setup(); No-op for this chipset
- sdram_initialize(sizeof(memctrl)/sizeof(memctrl[0]), memctrl);
- }
-
- // NOTE: ROMCC dies with an internal compiler error
- // if the following line is removed.
- print_debug("SDRAM is up.\r\n");
-}
+#define ASSEMBLY 1 + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include <arch/cpu.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" +#include "southbridge/intel/i82801ca/i82801ca_early_smbus.c" +#include "northbridge/intel/e7501/raminit.h" +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/intel/e7501/debug.c" +#include "superio/smsc/lpc47b272/lpc47b272_early_serial.c" +#include "cpu/x86/mtrr/earlymtrr.c" +#include "cpu/x86/bist.h" + +#define SUPERIO_PORT 0x2e +#define SERIAL_DEV PNP_DEV(SUPERIO_PORT, LPC47B272_SP1) + +static void hard_reset(void) +{ + outb(0x0e, 0x0cf9); +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ + /* nothing to do */ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/intel/e7501/raminit.c" +#include "northbridge/intel/e7501/reset_test.c" +#include "sdram/generic_sdram.c" + + +// This function MUST appear last (ROMCC limitation) +static void main(unsigned long bist) +{ + static const struct mem_controller memctrl[] = { + { + .d0 = PCI_DEV(0, 0, 0), + .d0f1 = PCI_DEV(0, 0, 1), + .channel0 = { (0xa<<3)|0, (0xa<<3)|1, (0xa<<3)|2, 0 }, + .channel1 = { (0xa<<3)|4, (0xa<<3)|5, (0xa<<3)|6, 0 }, + }, + }; + + if (bist == 0) + { + // Skip this if there was a built in self test failure + + early_mtrr_init(); + enable_lapic(); + } + + // Get the serial port running and print a welcome banner + + lpc47b272_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + + // Halt if there was a built in self test failure + report_bist_failure(bist); + +// print_pci_devices(); + + // If this is a warm boot, some initialization can be skipped + + if (!bios_reset_detected()) + { + enable_smbus(); +// dump_spd_registers(&memctrl[0]); +// dump_smbus_registers(); + +// memreset_setup(); No-op for this chipset + sdram_initialize(sizeof(memctrl)/sizeof(memctrl[0]), memctrl); + } + + // NOTE: ROMCC dies with an internal compiler error + // if the following line is removed. + print_debug("SDRAM is up.\r\n"); +} diff --git a/src/mainboard/intel/xe7501devkit/bus.h b/src/mainboard/intel/xe7501devkit/bus.h index 0a99bb2808..84661ddb36 100644 --- a/src/mainboard/intel/xe7501devkit/bus.h +++ b/src/mainboard/intel/xe7501devkit/bus.h @@ -1,17 +1,17 @@ -#ifndef XE7501DEVKIT_BUS_H_INCLUDED
-#define XE7501DEVKIT_BUS_H_INCLUDED
-
-// These were determined by seeing how LinuxBIOS enumerates the various
-// PCI (and PCI-like) buses on the board.
-
-#define PCI_BUS_CHIPSET 0
-#define PCI_BUS_E7501_HI_B 1 // P64H2#2
-#define PCI_BUS_P64H2_2_B 2 // P64H2#2 bus B
-#define PCI_BUS_P64H2_2_A 3 // P64H2#2 bus A
-#define PCI_BUS_E7501_HI_D 4 // P64H2#1
-#define PCI_BUS_P64H2_1_B 5 // P64H2#1 bus B
-#define PCI_BUS_P64H2_1_A 6 // P64H2#1 bus A
-#define PCI_BUS_ICH3 7 // ICH3-S
-#define SUPERIO_BUS 8 // (arbitrary but unique bus #)
-
-#endif // XE7501DEVKIT_BUS_H_INCLUDED
+#ifndef XE7501DEVKIT_BUS_H_INCLUDED +#define XE7501DEVKIT_BUS_H_INCLUDED + +// These were determined by seeing how LinuxBIOS enumerates the various +// PCI (and PCI-like) buses on the board. + +#define PCI_BUS_CHIPSET 0 +#define PCI_BUS_E7501_HI_B 1 // P64H2#2 +#define PCI_BUS_P64H2_2_B 2 // P64H2#2 bus B +#define PCI_BUS_P64H2_2_A 3 // P64H2#2 bus A +#define PCI_BUS_E7501_HI_D 4 // P64H2#1 +#define PCI_BUS_P64H2_1_B 5 // P64H2#1 bus B +#define PCI_BUS_P64H2_1_A 6 // P64H2#1 bus A +#define PCI_BUS_ICH3 7 // ICH3-S +#define SUPERIO_BUS 8 // (arbitrary but unique bus #) + +#endif // XE7501DEVKIT_BUS_H_INCLUDED diff --git a/src/mainboard/intel/xe7501devkit/chip.h b/src/mainboard/intel/xe7501devkit/chip.h index b0885c1a54..12a9127ff2 100644 --- a/src/mainboard/intel/xe7501devkit/chip.h +++ b/src/mainboard/intel/xe7501devkit/chip.h @@ -1,6 +1,6 @@ -extern unsigned char _vgarom_start[];
-
-extern struct chip_operations mainboard_intel_xe7501devkit_ops;
-
-struct mainboard_intel_xe7501devkit_config {
-};
+extern unsigned char _vgarom_start[]; + +extern struct chip_operations mainboard_intel_xe7501devkit_ops; + +struct mainboard_intel_xe7501devkit_config { +}; diff --git a/src/mainboard/intel/xe7501devkit/cmos.layout b/src/mainboard/intel/xe7501devkit/cmos.layout index 1aa038d34d..57139c1cd5 100644 --- a/src/mainboard/intel/xe7501devkit/cmos.layout +++ b/src/mainboard/intel/xe7501devkit/cmos.layout @@ -7,8 +7,8 @@ entries 0 512 r 0 reserved_memory1 # We know nothing about the factory BIOS 512 512 r 0 reserved_memory2 # More factory BIOS -# Work in progress.
-# This is where we would put the LB RTC_BOOT_BYTE options once the code
+# Work in progress. +# This is where we would put the LB RTC_BOOT_BYTE options once the code # supports finding them there. #1024 1 e 4 boot_option #1025 1 e 4 last_boot diff --git a/src/mainboard/intel/xe7501devkit/failover.c b/src/mainboard/intel/xe7501devkit/failover.c index 68a1fec4eb..5ec12d67cd 100644 --- a/src/mainboard/intel/xe7501devkit/failover.c +++ b/src/mainboard/intel/xe7501devkit/failover.c @@ -1,47 +1,47 @@ -#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/intel/i82801ca/cmos_failover.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/intel/e7501/reset_test.c"
-
-static unsigned long main(unsigned long bist)
-{
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else {
-
- check_cmos_failed();
-
- if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
-#if 0
- cpu_reset:
- asm volatile ("jmp __cpu_reset"
- : /* outputs */
- : "a"(bist) /* inputs */
- : /* clobbers */
- );
-#endif
- fallback_image:
- return bist;
-}
+#define ASSEMBLY 1 +#include <stdint.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "pc80/mc146818rtc_early.c" +#include "southbridge/intel/i82801ca/cmos_failover.c" +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/intel/e7501/reset_test.c" + +static unsigned long main(unsigned long bist) +{ + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal()) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else { + + check_cmos_failed(); + + if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + } + normal_image: + asm volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + : /* clobbers */ + ); +#if 0 + cpu_reset: + asm volatile ("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + : /* clobbers */ + ); +#endif + fallback_image: + return bist; +} diff --git a/src/mainboard/intel/xe7501devkit/ioapic.h b/src/mainboard/intel/xe7501devkit/ioapic.h index 6db3d949f6..642c04519f 100644 --- a/src/mainboard/intel/xe7501devkit/ioapic.h +++ b/src/mainboard/intel/xe7501devkit/ioapic.h @@ -1,11 +1,11 @@ -// IOAPIC addresses determined by LinuxBIOS enumeration.
-// Someday add functions to get APIC IDs and versions from the chips themselves.
-
-#define IOAPIC_ICH3 2
-#define IOAPIC_P64H2_2_BUS_B 3 // IOAPIC 3 at 01:1c.0 MBAR = fe300000 DataAddr = fe300010
-#define IOAPIC_P64H2_2_BUS_A 4 // IOAPIC 4 at 01:1e.0 MBAR = fe301000 DataAddr = fe301010
-#define IOAPIC_P64H2_1_BUS_B 5 // IOAPIC 5 at 04:1c.0 MBAR = fe500000 DataAddr = fe500010
-#define IOAPIC_P64H2_1_BUS_A 8 // IOAPIC 8 at 04:1e.0 MBAR = fe501000 DataAddr = fe501010
-
-#define P64H2_IOAPIC_VERSION 0x20
-#define INTEL_IOAPIC_NUM_INTERRUPTS 24 // Both ICH-3 and P64-H2
+// IOAPIC addresses determined by LinuxBIOS enumeration. +// Someday add functions to get APIC IDs and versions from the chips themselves. + +#define IOAPIC_ICH3 2 +#define IOAPIC_P64H2_2_BUS_B 3 // IOAPIC 3 at 01:1c.0 MBAR = fe300000 DataAddr = fe300010 +#define IOAPIC_P64H2_2_BUS_A 4 // IOAPIC 4 at 01:1e.0 MBAR = fe301000 DataAddr = fe301010 +#define IOAPIC_P64H2_1_BUS_B 5 // IOAPIC 5 at 04:1c.0 MBAR = fe500000 DataAddr = fe500010 +#define IOAPIC_P64H2_1_BUS_A 8 // IOAPIC 8 at 04:1e.0 MBAR = fe501000 DataAddr = fe501010 + +#define P64H2_IOAPIC_VERSION 0x20 +#define INTEL_IOAPIC_NUM_INTERRUPTS 24 // Both ICH-3 and P64-H2 diff --git a/src/mainboard/intel/xe7501devkit/irq_tables.c b/src/mainboard/intel/xe7501devkit/irq_tables.c index c30bf2daf2..0134f3be6d 100644 --- a/src/mainboard/intel/xe7501devkit/irq_tables.c +++ b/src/mainboard/intel/xe7501devkit/irq_tables.c @@ -1,74 +1,74 @@ -/* Run checkpir to verify any changes to this table...
- Documentation at : http://www.microsoft.com/whdc/archive/pciirq.mspx
-*/
-
-#include <arch/pirq_routing.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include "bus.h"
-
-#define UNUSED_INTERRUPT {0, 0}
-#define PIRQ_A 0x60
-#define PIRQ_B 0x61
-#define PIRQ_C 0x62
-#define PIRQ_D 0x63
-#define PIRQ_E 0x68
-#define PIRQ_F 0x69
-#define PIRQ_G 0x6A
-#define PIRQ_H 0x6B
-
-const struct irq_routing_table intel_irq_routing_table = {
- PIRQ_SIGNATURE,
- PIRQ_VERSION,
- 32 + 12*sizeof(struct irq_info), // Size of this struct in bytes
- 0, // PCI bus number on which the interrupt router resides
- PCI_DEVFN(31, 0), // PCI device/function number of the interrupt router
- 0, // PCI-exclusive IRQ bitmap
- PCI_VENDOR_ID_INTEL, // Vendor ID of compatible PCI interrupt router
- PCI_DEVICE_ID_INTEL_82801CA_LPC, // Device ID of compatible PCI interrupt router
- 0, // Additional miniport information
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, // Reserved, must be zero
- 0xB1, // Checksum of the entire structure (causes 8-bit sum == 0)
- {
- // NOTE: For 82801, a nonzero link value is a pointer to a PIRQ[n]_ROUT register in PCI configuration space
- // This was determined from linux-2.6.11/arch/i386/pci/irq.c
- // bitmap of 0xdcf8 == routable to IRQ3-IRQ7, IRQ10-IRQ12, or IRQ14-IRQ15
- // ICH-3 doesn't allow SERIRQ or PCI message to generate IRQ0, IRQ2, IRQ8, or IRQ13
- // Not sure why IRQ9 isn't routable (inherited from Tyan S2735)
-
- // INTA# INTB# INTC# INTD#
- // bus, device # {link , bitmap}, {link , bitmap}, {link , bitmap}, {link , bitmap}, slot, rfu
-
- {PCI_BUS_CHIPSET, PCI_DEVFN(31, 0), {{PIRQ_C, 0xdcf8}, {PIRQ_B, 0xdcf8}, UNUSED_INTERRUPT, UNUSED_INTERRUPT}, 0, 0}, // IDE / SMBus
- {PCI_BUS_CHIPSET, PCI_DEVFN(29, 0), {{PIRQ_A, 0xdcf8}, {PIRQ_D, 0xdcf8}, {PIRQ_C, 0xdcf8}, UNUSED_INTERRUPT}, 0, 0}, // USB 1.1
-
- // P64H2#2 Bus A
- {PCI_BUS_P64H2_2_A, PCI_DEVFN(1, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, UNUSED_INTERRUPT, UNUSED_INTERRUPT}, 0, 0}, // SCSI
- // NOTE: Hotplug disabled on this bus
-
- // P64H2#2 Bus B
- {PCI_BUS_P64H2_2_B, PCI_DEVFN(1, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 23, 0}, // Slot 2A (J23)
- {PCI_BUS_P64H2_2_B, PCI_DEVFN(2, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 24, 0}, // Slot 2B (J24)
- {PCI_BUS_P64H2_2_B, PCI_DEVFN(3, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 25, 0}, // Slot 2C (J25)
- {PCI_BUS_P64H2_2_B, PCI_DEVFN(4, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 12, 0}, // Slot 2D (J12)
- // NOTE: Hotplug disabled on this bus
-
- // P64H2#1 Bus A
- {PCI_BUS_P64H2_1_A, PCI_DEVFN(1, 0), {{PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}}, 20, 0}, // Slot 1A (J20)
- // NOTE: Hotplug disabled on this bus
-
- // P64H2#1 Bus B
- {PCI_BUS_P64H2_1_B, PCI_DEVFN(1, 0), {{PIRQ_A, 0xdcf8}, UNUSED_INTERRUPT, UNUSED_INTERRUPT, UNUSED_INTERRUPT}, 0, 0}, // GB Ethernet
- {PCI_BUS_P64H2_1_B, PCI_DEVFN(2, 0), {{PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}}, 21, 0}, // Slot 1B (J21)
- // NOTE: Hotplug disabled on this bus
-
- // ICH-3 PCI bus
- {PCI_BUS_ICH3, PCI_DEVFN(0, 0), {{PIRQ_A, 0xdcf8}, UNUSED_INTERRUPT, UNUSED_INTERRUPT, UNUSED_INTERRUPT}, 0, 0}, // Video
- {PCI_BUS_ICH3, PCI_DEVFN(2, 0), {{PIRQ_C, 0xdcf8}, {PIRQ_D, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 11, 0}, // Debug slot (J11)
- }
-};
-
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
- return copy_pirq_routing_table(addr);
-}
+/* Run checkpir to verify any changes to this table... + Documentation at : http://www.microsoft.com/whdc/archive/pciirq.mspx +*/ + +#include <arch/pirq_routing.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include "bus.h" + +#define UNUSED_INTERRUPT {0, 0} +#define PIRQ_A 0x60 +#define PIRQ_B 0x61 +#define PIRQ_C 0x62 +#define PIRQ_D 0x63 +#define PIRQ_E 0x68 +#define PIRQ_F 0x69 +#define PIRQ_G 0x6A +#define PIRQ_H 0x6B + +const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, + PIRQ_VERSION, + 32 + 12*sizeof(struct irq_info), // Size of this struct in bytes + 0, // PCI bus number on which the interrupt router resides + PCI_DEVFN(31, 0), // PCI device/function number of the interrupt router + 0, // PCI-exclusive IRQ bitmap + PCI_VENDOR_ID_INTEL, // Vendor ID of compatible PCI interrupt router + PCI_DEVICE_ID_INTEL_82801CA_LPC, // Device ID of compatible PCI interrupt router + 0, // Additional miniport information + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, // Reserved, must be zero + 0xB1, // Checksum of the entire structure (causes 8-bit sum == 0) + { + // NOTE: For 82801, a nonzero link value is a pointer to a PIRQ[n]_ROUT register in PCI configuration space + // This was determined from linux-2.6.11/arch/i386/pci/irq.c + // bitmap of 0xdcf8 == routable to IRQ3-IRQ7, IRQ10-IRQ12, or IRQ14-IRQ15 + // ICH-3 doesn't allow SERIRQ or PCI message to generate IRQ0, IRQ2, IRQ8, or IRQ13 + // Not sure why IRQ9 isn't routable (inherited from Tyan S2735) + + // INTA# INTB# INTC# INTD# + // bus, device # {link , bitmap}, {link , bitmap}, {link , bitmap}, {link , bitmap}, slot, rfu + + {PCI_BUS_CHIPSET, PCI_DEVFN(31, 0), {{PIRQ_C, 0xdcf8}, {PIRQ_B, 0xdcf8}, UNUSED_INTERRUPT, UNUSED_INTERRUPT}, 0, 0}, // IDE / SMBus + {PCI_BUS_CHIPSET, PCI_DEVFN(29, 0), {{PIRQ_A, 0xdcf8}, {PIRQ_D, 0xdcf8}, {PIRQ_C, 0xdcf8}, UNUSED_INTERRUPT}, 0, 0}, // USB 1.1 + + // P64H2#2 Bus A + {PCI_BUS_P64H2_2_A, PCI_DEVFN(1, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, UNUSED_INTERRUPT, UNUSED_INTERRUPT}, 0, 0}, // SCSI + // NOTE: Hotplug disabled on this bus + + // P64H2#2 Bus B + {PCI_BUS_P64H2_2_B, PCI_DEVFN(1, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 23, 0}, // Slot 2A (J23) + {PCI_BUS_P64H2_2_B, PCI_DEVFN(2, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 24, 0}, // Slot 2B (J24) + {PCI_BUS_P64H2_2_B, PCI_DEVFN(3, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 25, 0}, // Slot 2C (J25) + {PCI_BUS_P64H2_2_B, PCI_DEVFN(4, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 12, 0}, // Slot 2D (J12) + // NOTE: Hotplug disabled on this bus + + // P64H2#1 Bus A + {PCI_BUS_P64H2_1_A, PCI_DEVFN(1, 0), {{PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}}, 20, 0}, // Slot 1A (J20) + // NOTE: Hotplug disabled on this bus + + // P64H2#1 Bus B + {PCI_BUS_P64H2_1_B, PCI_DEVFN(1, 0), {{PIRQ_A, 0xdcf8}, UNUSED_INTERRUPT, UNUSED_INTERRUPT, UNUSED_INTERRUPT}, 0, 0}, // GB Ethernet + {PCI_BUS_P64H2_1_B, PCI_DEVFN(2, 0), {{PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}}, 21, 0}, // Slot 1B (J21) + // NOTE: Hotplug disabled on this bus + + // ICH-3 PCI bus + {PCI_BUS_ICH3, PCI_DEVFN(0, 0), {{PIRQ_A, 0xdcf8}, UNUSED_INTERRUPT, UNUSED_INTERRUPT, UNUSED_INTERRUPT}, 0, 0}, // Video + {PCI_BUS_ICH3, PCI_DEVFN(2, 0), {{PIRQ_C, 0xdcf8}, {PIRQ_D, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 11, 0}, // Debug slot (J11) + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr); +} diff --git a/src/mainboard/intel/xe7501devkit/mainboard.c b/src/mainboard/intel/xe7501devkit/mainboard.c index 38639b9d39..158b0183e2 100644 --- a/src/mainboard/intel/xe7501devkit/mainboard.c +++ b/src/mainboard/intel/xe7501devkit/mainboard.c @@ -1,12 +1,12 @@ -#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/pci_ops.h>
-#include "chip.h"
-
-#if CONFIG_CHIP_NAME == 1
-struct chip_operations mainboard_intel_xe7501devkit_ops = {
- CHIP_NAME("Intel Xeon E7501 DevKit mainboard")
-};
-#endif
+#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include "chip.h" + +#if CONFIG_CHIP_NAME == 1 +struct chip_operations mainboard_intel_xe7501devkit_ops = { + CHIP_NAME("Intel Xeon E7501 DevKit mainboard") +}; +#endif diff --git a/src/mainboard/intel/xe7501devkit/mptable.c b/src/mainboard/intel/xe7501devkit/mptable.c index 7dae29c450..0da0676d35 100644 --- a/src/mainboard/intel/xe7501devkit/mptable.c +++ b/src/mainboard/intel/xe7501devkit/mptable.c @@ -1,180 +1,180 @@ -#include <console/console.h>
-#include <arch/smp/mpspec.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-#include <assert.h>
-#include "bus.h"
-#include "ioapic.h"
-
-// Generate MP-table IRQ numbers for PCI devices.
-#define INT_A 0
-#define INT_B 1
-#define INT_C 2
-#define INT_D 3
-#define PCI_IRQ(dev, intLine) (((dev)<<2) | intLine)
-
-
-void xe7501devkit_register_buses(struct mp_config_table *mc)
-{
- // Bus ID, Bus Type
- smp_write_bus(mc, PCI_BUS_CHIPSET, BUSTYPE_PCI);
- smp_write_bus(mc, PCI_BUS_E7501_HI_B, BUSTYPE_PCI);
- smp_write_bus(mc, PCI_BUS_P64H2_2_B, BUSTYPE_PCI);
- smp_write_bus(mc, PCI_BUS_P64H2_2_A, BUSTYPE_PCI);
- smp_write_bus(mc, PCI_BUS_E7501_HI_D, BUSTYPE_PCI);
- smp_write_bus(mc, PCI_BUS_P64H2_1_B, BUSTYPE_PCI);
- smp_write_bus(mc, PCI_BUS_P64H2_1_A, BUSTYPE_PCI);
- smp_write_bus(mc, PCI_BUS_ICH3, BUSTYPE_PCI);
- smp_write_bus(mc, SUPERIO_BUS, BUSTYPE_ISA);
-}
-
-void xe7501devkit_register_ioapics(struct mp_config_table *mc)
-{
- device_t dev;
- struct resource *res;
-
- // TODO: Gack. This is REALLY ugly.
-
- // Southbridge IOAPIC
- smp_write_ioapic(mc, IOAPIC_ICH3, 0x20, 0xfec00000); // APIC ID, Version, Address
-
- // P64H2#2 Bus A IOAPIC
- dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(30, 0));
- if (!dev)
- BUG(); // Config.lb error?
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- smp_write_ioapic(mc, IOAPIC_P64H2_2_BUS_A, P64H2_IOAPIC_VERSION, res->base);
-
- // P64H2#2 Bus B IOAPIC
- dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(28, 0));
- if (!dev)
- BUG(); // Config.lb error?
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- smp_write_ioapic(mc, IOAPIC_P64H2_2_BUS_B, P64H2_IOAPIC_VERSION, res->base);
-
-
- // P64H2#1 Bus A IOAPIC
- dev = dev_find_slot(PCI_BUS_E7501_HI_D, PCI_DEVFN(30, 0));
- if (!dev)
- BUG(); // Config.lb error?
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- smp_write_ioapic(mc, IOAPIC_P64H2_1_BUS_A, P64H2_IOAPIC_VERSION, res->base);
-
- // P64H2#1 Bus B IOAPIC
- dev = dev_find_slot(PCI_BUS_E7501_HI_D, PCI_DEVFN(28, 0));
- if (!dev)
- BUG(); // Config.lb error?
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- smp_write_ioapic(mc, IOAPIC_P64H2_1_BUS_B, P64H2_IOAPIC_VERSION, res->base);
-}
-
-void xe7501devkit_register_interrupts(struct mp_config_table *mc)
-{
- // Chipset PCI bus
- // Type Trigger | Polarity Bus ID IRQ APIC ID PIN#
- smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, PCI_BUS_CHIPSET, 0, MP_APIC_ALL, 0);
- smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, PCI_BUS_CHIPSET, 0, MP_APIC_ALL, 1);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(29, INT_A), IOAPIC_ICH3, 16); // USB 1.1 Controller #1
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(31, INT_B), IOAPIC_ICH3, 17); // SMBus
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(29, INT_C), IOAPIC_ICH3, 18); // USB 1.1 Controller #3
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(31, INT_C), IOAPIC_ICH3, 18); // IDE
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(29, INT_D), IOAPIC_ICH3, 19); // USB 1.1 Controller #2
-
- // P64H2#2 Bus B
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(1, INT_A), IOAPIC_P64H2_2_BUS_B, 0); // Slot 2A (J23)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(1, INT_B), IOAPIC_P64H2_2_BUS_B, 1); // Slot 2A (J23)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(1, INT_C), IOAPIC_P64H2_2_BUS_B, 2); // Slot 2A (J23)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(1, INT_D), IOAPIC_P64H2_2_BUS_B, 3); // Slot 2A (J23)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(2, INT_A), IOAPIC_P64H2_2_BUS_B, 4); // Slot 2B (J24)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(2, INT_B), IOAPIC_P64H2_2_BUS_B, 5); // Slot 2B (J24)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(2, INT_C), IOAPIC_P64H2_2_BUS_B, 6); // Slot 2B (J24)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(2, INT_D), IOAPIC_P64H2_2_BUS_B, 7); // Slot 2B (J24)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(3, INT_A), IOAPIC_P64H2_2_BUS_B, 8); // Slot 2C (J25)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(3, INT_B), IOAPIC_P64H2_2_BUS_B, 9); // Slot 2C (J25)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(3, INT_C), IOAPIC_P64H2_2_BUS_B, 10); // Slot 2C (J25)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(3, INT_D), IOAPIC_P64H2_2_BUS_B, 11); // Slot 2C (J25)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(4, INT_A), IOAPIC_P64H2_2_BUS_B, 12); // Slot 2D (J12)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(4, INT_B), IOAPIC_P64H2_2_BUS_B, 13); // Slot 2D (J12)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(4, INT_C), IOAPIC_P64H2_2_BUS_B, 14); // Slot 2D (J12)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(4, INT_D), IOAPIC_P64H2_2_BUS_B, 15); // Slot 2D (J12)
-
- // P64H2#2 Bus A
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_A, PCI_IRQ(1, INT_A), IOAPIC_P64H2_2_BUS_A, 0); // SCSI
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_A, PCI_IRQ(1, INT_B), IOAPIC_P64H2_2_BUS_A, 1); // SCSI
-
- // P64H2#1 Bus B
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(1, INT_A), IOAPIC_P64H2_1_BUS_B, 0); // GB Ethernet
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(2, INT_A), IOAPIC_P64H2_1_BUS_B, 4); // Slot 1B (J21)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(2, INT_B), IOAPIC_P64H2_1_BUS_B, 5); // Slot 1B (J21)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(2, INT_C), IOAPIC_P64H2_1_BUS_B, 6); // Slot 1B (J21)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(2, INT_D), IOAPIC_P64H2_1_BUS_B, 7); // Slot 1B (J21)
-
- // P64H2#1 Bus A
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_A, PCI_IRQ(1, INT_A), IOAPIC_P64H2_1_BUS_A, 0); // Slot 1A (J20)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_A, PCI_IRQ(1, INT_B), IOAPIC_P64H2_1_BUS_A, 1); // Slot 1A (J20)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_A, PCI_IRQ(1, INT_C), IOAPIC_P64H2_1_BUS_A, 2); // Slot 1A (J20)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_A, PCI_IRQ(1, INT_D), IOAPIC_P64H2_1_BUS_A, 3); // Slot 1A (J20)
-
- // ICH-3
-
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(0, INT_A), IOAPIC_ICH3, 16); // Video
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(2, INT_A), IOAPIC_ICH3, 18); // Debug slot (J11)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(2, INT_B), IOAPIC_ICH3, 19); // Debug slot (J11)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(2, INT_C), IOAPIC_ICH3, 16); // Debug slot (J11)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(2, INT_D), IOAPIC_ICH3, 17); // Debug slot (J11)
-
- // TODO: Not sure how to handle BT_INTR# signals from the P64H2s. Do we even need to, in APIC mode?
-
- // Super I/O (ISA interrupts)
- smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 0, IOAPIC_ICH3, 0);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 1, IOAPIC_ICH3, 1);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 0, IOAPIC_ICH3, 2);
-
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 3, IOAPIC_ICH3, 3);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 4, IOAPIC_ICH3, 4);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 6, IOAPIC_ICH3, 6);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 8, IOAPIC_ICH3, 8);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 9, IOAPIC_ICH3, 9);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 12, IOAPIC_ICH3, 12);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 13, IOAPIC_ICH3, 13);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 14, IOAPIC_ICH3, 14);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 15, IOAPIC_ICH3, 15);
-}
-
-void* smp_write_config_table(void* v)
-{
- static const char sig[4] = MPC_SIGNATURE;
- static const char oem[8] = "INTEL ";
- static const char productid[12] = "XE7501DEVKIT";
- struct mp_config_table *mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
- memset(mc, 0, sizeof(*mc));
-
- memcpy(mc->mpc_signature, sig, sizeof(sig));
- memcpy(mc->mpc_oem, oem, sizeof(oem));
- memcpy(mc->mpc_productid, productid, sizeof(productid));
-
- mc->mpc_length = sizeof(*mc); // initially just the header
- mc->mpc_spec = 0x04; // Multiprocessing Spec V1.4
- mc->mpc_lapic = LAPIC_ADDR;
-
- smp_write_processors(mc);
-
- xe7501devkit_register_buses(mc);
- xe7501devkit_register_ioapics(mc);
- xe7501devkit_register_interrupts(mc);
-
- /* Compute the checksums */
- mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
- mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
- printk_debug("Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc));
-
- return smp_next_mpe_entry(mc);
-}
-
-unsigned long write_smp_table(unsigned long addr)
-{
- void *v;
- v = smp_write_floating_table(addr);
- return (unsigned long)smp_write_config_table(v);
-}
+#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <assert.h> +#include "bus.h" +#include "ioapic.h" + +// Generate MP-table IRQ numbers for PCI devices. +#define INT_A 0 +#define INT_B 1 +#define INT_C 2 +#define INT_D 3 +#define PCI_IRQ(dev, intLine) (((dev)<<2) | intLine) + + +void xe7501devkit_register_buses(struct mp_config_table *mc) +{ + // Bus ID, Bus Type + smp_write_bus(mc, PCI_BUS_CHIPSET, BUSTYPE_PCI); + smp_write_bus(mc, PCI_BUS_E7501_HI_B, BUSTYPE_PCI); + smp_write_bus(mc, PCI_BUS_P64H2_2_B, BUSTYPE_PCI); + smp_write_bus(mc, PCI_BUS_P64H2_2_A, BUSTYPE_PCI); + smp_write_bus(mc, PCI_BUS_E7501_HI_D, BUSTYPE_PCI); + smp_write_bus(mc, PCI_BUS_P64H2_1_B, BUSTYPE_PCI); + smp_write_bus(mc, PCI_BUS_P64H2_1_A, BUSTYPE_PCI); + smp_write_bus(mc, PCI_BUS_ICH3, BUSTYPE_PCI); + smp_write_bus(mc, SUPERIO_BUS, BUSTYPE_ISA); +} + +void xe7501devkit_register_ioapics(struct mp_config_table *mc) +{ + device_t dev; + struct resource *res; + + // TODO: Gack. This is REALLY ugly. + + // Southbridge IOAPIC + smp_write_ioapic(mc, IOAPIC_ICH3, 0x20, 0xfec00000); // APIC ID, Version, Address + + // P64H2#2 Bus A IOAPIC + dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(30, 0)); + if (!dev) + BUG(); // Config.lb error? + res = find_resource(dev, PCI_BASE_ADDRESS_0); + smp_write_ioapic(mc, IOAPIC_P64H2_2_BUS_A, P64H2_IOAPIC_VERSION, res->base); + + // P64H2#2 Bus B IOAPIC + dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(28, 0)); + if (!dev) + BUG(); // Config.lb error? + res = find_resource(dev, PCI_BASE_ADDRESS_0); + smp_write_ioapic(mc, IOAPIC_P64H2_2_BUS_B, P64H2_IOAPIC_VERSION, res->base); + + + // P64H2#1 Bus A IOAPIC + dev = dev_find_slot(PCI_BUS_E7501_HI_D, PCI_DEVFN(30, 0)); + if (!dev) + BUG(); // Config.lb error? + res = find_resource(dev, PCI_BASE_ADDRESS_0); + smp_write_ioapic(mc, IOAPIC_P64H2_1_BUS_A, P64H2_IOAPIC_VERSION, res->base); + + // P64H2#1 Bus B IOAPIC + dev = dev_find_slot(PCI_BUS_E7501_HI_D, PCI_DEVFN(28, 0)); + if (!dev) + BUG(); // Config.lb error? + res = find_resource(dev, PCI_BASE_ADDRESS_0); + smp_write_ioapic(mc, IOAPIC_P64H2_1_BUS_B, P64H2_IOAPIC_VERSION, res->base); +} + +void xe7501devkit_register_interrupts(struct mp_config_table *mc) +{ + // Chipset PCI bus + // Type Trigger | Polarity Bus ID IRQ APIC ID PIN# + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, PCI_BUS_CHIPSET, 0, MP_APIC_ALL, 0); + smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, PCI_BUS_CHIPSET, 0, MP_APIC_ALL, 1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(29, INT_A), IOAPIC_ICH3, 16); // USB 1.1 Controller #1 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(31, INT_B), IOAPIC_ICH3, 17); // SMBus + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(29, INT_C), IOAPIC_ICH3, 18); // USB 1.1 Controller #3 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(31, INT_C), IOAPIC_ICH3, 18); // IDE + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(29, INT_D), IOAPIC_ICH3, 19); // USB 1.1 Controller #2 + + // P64H2#2 Bus B + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(1, INT_A), IOAPIC_P64H2_2_BUS_B, 0); // Slot 2A (J23) + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(1, INT_B), IOAPIC_P64H2_2_BUS_B, 1); // Slot 2A (J23) + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(1, INT_C), IOAPIC_P64H2_2_BUS_B, 2); // Slot 2A (J23) + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(1, INT_D), IOAPIC_P64H2_2_BUS_B, 3); // Slot 2A (J23) + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(2, INT_A), IOAPIC_P64H2_2_BUS_B, 4); // Slot 2B (J24) + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(2, INT_B), IOAPIC_P64H2_2_BUS_B, 5); // Slot 2B (J24) + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(2, INT_C), IOAPIC_P64H2_2_BUS_B, 6); // Slot 2B (J24) + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(2, INT_D), IOAPIC_P64H2_2_BUS_B, 7); // Slot 2B (J24) + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(3, INT_A), IOAPIC_P64H2_2_BUS_B, 8); // Slot 2C (J25) + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(3, INT_B), IOAPIC_P64H2_2_BUS_B, 9); // Slot 2C (J25) + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(3, INT_C), IOAPIC_P64H2_2_BUS_B, 10); // Slot 2C (J25) + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(3, INT_D), IOAPIC_P64H2_2_BUS_B, 11); // Slot 2C (J25) + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(4, INT_A), IOAPIC_P64H2_2_BUS_B, 12); // Slot 2D (J12) + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(4, INT_B), IOAPIC_P64H2_2_BUS_B, 13); // Slot 2D (J12) + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(4, INT_C), IOAPIC_P64H2_2_BUS_B, 14); // Slot 2D (J12) + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(4, INT_D), IOAPIC_P64H2_2_BUS_B, 15); // Slot 2D (J12) + + // P64H2#2 Bus A + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_A, PCI_IRQ(1, INT_A), IOAPIC_P64H2_2_BUS_A, 0); // SCSI + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_A, PCI_IRQ(1, INT_B), IOAPIC_P64H2_2_BUS_A, 1); // SCSI + + // P64H2#1 Bus B + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(1, INT_A), IOAPIC_P64H2_1_BUS_B, 0); // GB Ethernet + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(2, INT_A), IOAPIC_P64H2_1_BUS_B, 4); // Slot 1B (J21) + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(2, INT_B), IOAPIC_P64H2_1_BUS_B, 5); // Slot 1B (J21) + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(2, INT_C), IOAPIC_P64H2_1_BUS_B, 6); // Slot 1B (J21) + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(2, INT_D), IOAPIC_P64H2_1_BUS_B, 7); // Slot 1B (J21) + + // P64H2#1 Bus A + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_A, PCI_IRQ(1, INT_A), IOAPIC_P64H2_1_BUS_A, 0); // Slot 1A (J20) + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_A, PCI_IRQ(1, INT_B), IOAPIC_P64H2_1_BUS_A, 1); // Slot 1A (J20) + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_A, PCI_IRQ(1, INT_C), IOAPIC_P64H2_1_BUS_A, 2); // Slot 1A (J20) + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_A, PCI_IRQ(1, INT_D), IOAPIC_P64H2_1_BUS_A, 3); // Slot 1A (J20) + + // ICH-3 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(0, INT_A), IOAPIC_ICH3, 16); // Video + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(2, INT_A), IOAPIC_ICH3, 18); // Debug slot (J11) + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(2, INT_B), IOAPIC_ICH3, 19); // Debug slot (J11) + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(2, INT_C), IOAPIC_ICH3, 16); // Debug slot (J11) + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(2, INT_D), IOAPIC_ICH3, 17); // Debug slot (J11) + + // TODO: Not sure how to handle BT_INTR# signals from the P64H2s. Do we even need to, in APIC mode? + + // Super I/O (ISA interrupts) + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 0, IOAPIC_ICH3, 0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 1, IOAPIC_ICH3, 1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 0, IOAPIC_ICH3, 2); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 3, IOAPIC_ICH3, 3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 4, IOAPIC_ICH3, 4); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 6, IOAPIC_ICH3, 6); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 8, IOAPIC_ICH3, 8); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 9, IOAPIC_ICH3, 9); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 12, IOAPIC_ICH3, 12); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 13, IOAPIC_ICH3, 13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 14, IOAPIC_ICH3, 14); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 15, IOAPIC_ICH3, 15); +} + +void* smp_write_config_table(void* v) +{ + static const char sig[4] = MPC_SIGNATURE; + static const char oem[8] = "INTEL "; + static const char productid[12] = "XE7501DEVKIT"; + struct mp_config_table *mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + memset(mc, 0, sizeof(*mc)); + + memcpy(mc->mpc_signature, sig, sizeof(sig)); + memcpy(mc->mpc_oem, oem, sizeof(oem)); + memcpy(mc->mpc_productid, productid, sizeof(productid)); + + mc->mpc_length = sizeof(*mc); // initially just the header + mc->mpc_spec = 0x04; // Multiprocessing Spec V1.4 + mc->mpc_lapic = LAPIC_ADDR; + + smp_write_processors(mc); + + xe7501devkit_register_buses(mc); + xe7501devkit_register_ioapics(mc); + xe7501devkit_register_interrupts(mc); + + /* Compute the checksums */ + mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); + mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); + printk_debug("Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); + + return smp_next_mpe_entry(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/newisys/khepri/cmos.layout b/src/mainboard/newisys/khepri/cmos.layout index 247715e6ac..0daae9221d 100644 --- a/src/mainboard/newisys/khepri/cmos.layout +++ b/src/mainboard/newisys/khepri/cmos.layout @@ -32,6 +32,7 @@ entries 395 1 e 1 hw_scrubber 396 1 e 1 interleave_chip_selects 397 2 e 8 max_mem_clock +399 1 e 2 dual_core 400 1 e 1 power_on_after_fail 412 4 e 6 debug_level 416 4 e 7 boot_first @@ -41,6 +42,7 @@ entries 432 8 h 0 boot_countdown 440 4 e 9 slow_cpu 444 1 e 1 nmi +445 1 e 1 iommu 728 256 h 0 user_data 984 16 h 0 check_sum # Reserve the extended AMD configuration registers @@ -76,10 +78,10 @@ enumerations 7 9 Fallback_HDD 7 10 Fallback_Floppy #7 3 ROM -8 0 200Mhz -8 1 166Mhz -8 2 133Mhz -8 3 100Mhz +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz 9 0 off 9 1 87.5% 9 2 75.0% diff --git a/src/southbridge/via/vt8231/chip.h b/src/southbridge/via/vt8231/chip.h index fef4e2913b..277ead7705 100644 --- a/src/southbridge/via/vt8231/chip.h +++ b/src/southbridge/via/vt8231/chip.h @@ -8,6 +8,9 @@ struct southbridge_via_vt8231_config { int enable_native_ide; int enable_com_ports; int enable_keyboard; + /* currently not parsed but needed by densitron dpx114 */ + int enable_usb; + int enable_nvram; }; #endif /* _SOUTHBRIDGE_VIA_VT8231 */ |