summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/cpu/intel/speedstep/Makefile.inc2
-rw-r--r--src/cpu/intel/speedstep/acpi.c195
-rw-r--r--src/cpu/intel/speedstep/speedstep.c189
-rw-r--r--src/include/cpu/intel/speedstep.h74
4 files changed, 379 insertions, 81 deletions
diff --git a/src/cpu/intel/speedstep/Makefile.inc b/src/cpu/intel/speedstep/Makefile.inc
index c717a3304e..753dbcd6a9 100644
--- a/src/cpu/intel/speedstep/Makefile.inc
+++ b/src/cpu/intel/speedstep/Makefile.inc
@@ -1 +1 @@
-ramstage-$(CONFIG_GENERATE_ACPI_TABLES) += acpi.c
+ramstage-$(CONFIG_GENERATE_ACPI_TABLES) += acpi.c speedstep.c
diff --git a/src/cpu/intel/speedstep/acpi.c b/src/cpu/intel/speedstep/acpi.c
index 070f8d5076..910055d443 100644
--- a/src/cpu/intel/speedstep/acpi.c
+++ b/src/cpu/intel/speedstep/acpi.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2009 coresystems GmbH
+ * 2012 secunet Security Networks AG
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -28,7 +29,18 @@
#include <cpu/intel/speedstep.h>
#include <device/device.h>
-// XXX: PSS table values for power consumption are for Merom only
+/**
+ * @brief Returns c-state entries for this system
+ *
+ * This function is usually overwritten in mainboard code.
+ *
+ * @return Number of c-states *entries will point to.
+ */
+int __attribute__((weak)) get_cst_entries(acpi_cstate_t **entries
+ __attribute__((unused)))
+{
+ return 0;
+}
static int determine_total_number_of_cores(void)
{
@@ -47,110 +59,133 @@ static int determine_total_number_of_cores(void)
return count;
}
+/**
+ * @brief Returns three times the FSB clock in MHz
+ *
+ * The result of calculations with the returned value shall be divided by 3.
+ * This helps to avoid rounding errors.
+ */
static int get_fsb(void)
{
const u32 fsbcode = rdmsr(0xcd).lo & 7;
switch (fsbcode) {
- case 0: return 266;
- case 1: return 133;
- case 2: return 200;
- case 3: return 166;
- case 4: return 333;
- case 5: return 100;
- case 6: return 400;
+ case 0: return 800; /* / 3 == 266 */
+ case 1: return 400; /* / 3 == 133 */
+ case 2: return 600; /* / 3 == 200 */
+ case 3: return 500; /* / 3 == 166 */
+ case 4: return 1000; /* / 3 == 333 */
+ case 5: return 300; /* / 3 == 100 */
+ case 6: return 1200; /* / 3 == 400 */
}
- printk(BIOS_DEBUG, "Warning: No supported FSB frequency. Assuming 200MHz\n");
- return 200;
+ printk(BIOS_WARNING,
+ "Warning: No supported FSB frequency. Assuming 200MHz\n");
+ return 600;
}
-int __attribute__((weak)) get_cst_entries(acpi_cstate_t **entries __attribute__((unused)))
+static int gen_pstate_entries(const sst_table_t *const pstates,
+ const int cpuID, const int cores_per_package,
+ const uint8_t coordination)
{
- return 0;
+ int i;
+ int len, len_ps;
+ int frequency;
+
+ len = acpigen_write_empty_PCT();
+ len += acpigen_write_PSD_package(
+ cpuID, cores_per_package, coordination);
+ len += acpigen_write_name("_PSS");
+
+ const int fsb3 = get_fsb();
+ const int min_ratio2 = SPEEDSTEP_DOUBLE_RATIO(
+ pstates->states[pstates->num_states - 1]);
+ const int max_ratio2 = SPEEDSTEP_DOUBLE_RATIO(pstates->states[0]);
+ printk(BIOS_DEBUG, "clocks between %d and %d MHz.\n",
+ (min_ratio2 * fsb3)
+ / (pstates->states[pstates->num_states - 1].is_slfm ? 12 : 6),
+ (max_ratio2 * fsb3) / 6);
+
+ printk(BIOS_DEBUG, "adding %x P-States between "
+ "busratio %x and %x, ""incl. P0\n",
+ pstates->num_states, min_ratio2 / 2, max_ratio2 / 2);
+ len_ps = acpigen_write_package(pstates->num_states);
+ for (i = 0; i < pstates->num_states; ++i) {
+ const sst_state_t *const pstate = &pstates->states[i];
+ /* Report frequency of turbo mode as that of HFM + 1. */
+ if (pstate->is_turbo)
+ frequency = (SPEEDSTEP_DOUBLE_RATIO(
+ pstates->states[i + 1]) * fsb3) / 6 + 1;
+ /* Super-LFM runs at half frequency. */
+ else if (pstate->is_slfm)
+ frequency = (SPEEDSTEP_DOUBLE_RATIO(*pstate)*fsb3)/12;
+ else
+ frequency = (SPEEDSTEP_DOUBLE_RATIO(*pstate)*fsb3)/6;
+ len_ps += acpigen_write_PSS_package(
+ frequency, pstate->power, 0, 0,
+ SPEEDSTEP_ENCODE_STATE(*pstate),
+ SPEEDSTEP_ENCODE_STATE(*pstate));
+ }
+ len_ps--;
+ acpigen_patch_len(len_ps);
+
+ len += acpigen_write_PPC(0);
+
+ len += len_ps;
+
+ return len;
}
+/**
+ * @brief Generate ACPI entries for Speedstep for each cpu
+ */
void generate_cpu_entries(void)
{
- int len_pr, len_ps;
+ int len_pr;
int coreID, cpuID, pcontrol_blk = PMB0_BASE, plen = 6;
- msr_t msr;
int totalcores = determine_total_number_of_cores();
int cores_per_package = (cpuid_ebx(1)>>16) & 0xff;
- int numcpus = totalcores/cores_per_package; // this assumes that all CPUs share the same layout
- int count;
- acpi_cstate_t *cst_entries;
+ int numcpus = totalcores/cores_per_package; /* This assumes that all
+ CPUs share the same
+ layout. */
+ int num_cstates;
+ acpi_cstate_t *cstates;
+ sst_table_t pstates;
+ uint8_t coordination;
+
+ printk(BIOS_DEBUG, "Found %d CPU(s) with %d core(s) each.\n",
+ numcpus, cores_per_package);
- printk(BIOS_DEBUG, "Found %d CPU(s) with %d core(s) each.\n", numcpus, cores_per_package);
+ num_cstates = get_cst_entries(&cstates);
+ speedstep_gen_pstates(&pstates);
+ if (((cpuid_eax(1) >> 4) & 0xffff) == 0x1067)
+ /* For Penryn use HW_ALL. */
+ coordination = HW_ALL;
+ else
+ /* Use SW_ANY as that was the default. */
+ coordination = SW_ANY;
- for (cpuID=1; cpuID <=numcpus; cpuID++) {
+ for (cpuID = 0; cpuID < numcpus; ++cpuID) {
for (coreID=1; coreID<=cores_per_package; coreID++) {
if (coreID>1) {
pcontrol_blk = 0;
plen = 0;
}
+
+ /* Generate processor \_PR.CPUx. */
len_pr = acpigen_write_processor(
- (cpuID - 1) * cores_per_package + coreID - 1, pcontrol_blk, plen);
- len_pr += acpigen_write_empty_PCT();
- len_pr += acpigen_write_PSD_package(cpuID-1,cores_per_package,SW_ANY);
- if ((count = get_cst_entries(&cst_entries)) > 0)
- len_pr += acpigen_write_CST_package(cst_entries, count);
- len_pr += acpigen_write_name("_PSS");
-
- int max_states=8;
- int busratio_step=2;
- msr = rdmsr(IA32_PERF_STS);
- int busratio_min=(msr.lo >> 24) & 0x1f;
- int busratio_max=(msr.hi >> (40-32)) & 0x1f;
- int vid_min=msr.lo & 0x3f;
- msr = rdmsr(IA32_PLATFORM_ID);
- int vid_max=msr.lo & 0x3f;
- int clock_max=get_fsb()*busratio_max;
- int clock_min=get_fsb()*busratio_min;
- printk(BIOS_DEBUG, "clocks between %d and %d MHz.\n", clock_min, clock_max);
-#define MEROM_MIN_POWER 16000
-#define MEROM_MAX_POWER 35000
- int power_max=MEROM_MAX_POWER;
- int power_min=MEROM_MIN_POWER;
-
- int num_states=(busratio_max-busratio_min)/busratio_step;
- while (num_states > max_states-1) {
- busratio_step <<= 1;
- num_states >>= 1;
- }
- printk(BIOS_DEBUG, "adding %x P-States between busratio %x and %x, incl. P0\n",
- num_states+1, busratio_min, busratio_max);
- int vid_step=(vid_max-vid_min)/num_states;
- int power_step=(power_max-power_min)/num_states;
- int clock_step=(clock_max-clock_min)/num_states;
- len_ps = acpigen_write_package(num_states + 1); /* For Super LFM, this must
- be increases by another one. */
- len_ps += acpigen_write_PSS_package(
- clock_max /*mhz*/, power_max /*mW*/, 0 /*lat1*/, 0 /*lat2*/,
- (busratio_max << 8) | vid_max /*control*/,
- (busratio_max << 8) | vid_max /*status*/);
-
- int current_busratio=busratio_min+((num_states-1)*busratio_step);
- int current_vid=vid_min+((num_states-1)*vid_step);
- int current_power=power_min+((num_states-1)*power_step);
- int current_clock=clock_min+((num_states-1)*clock_step);
- int i;
- for (i=0;i<num_states; i++) {
- len_ps += acpigen_write_PSS_package(
- current_clock /*mhz*/, current_power /*mW*/,
- 0 /*lat1*/, 0 /*lat2*/,
- (current_busratio << 8) | current_vid /*control*/,
- (current_busratio << 8) | current_vid /*status*/);
- current_busratio -= busratio_step;
- current_vid -= vid_step;
- current_power -= power_step;
- current_clock -= clock_step;
- }
- len_ps--;
- acpigen_patch_len(len_ps);
- len_pr += acpigen_write_PPC(0);
- len_pr += len_ps;
+ cpuID * cores_per_package + coreID - 1,
+ pcontrol_blk, plen);
+
+ /* Generate p-state entries. */
+ len_pr += gen_pstate_entries(&pstates, cpuID,
+ cores_per_package, coordination);
+
+ /* Generate c-state entries. */
+ if (num_cstates > 0)
+ len_pr += acpigen_write_CST_package(
+ cstates, num_cstates);
+
len_pr--;
acpigen_patch_len(len_pr);
}
}
}
-
diff --git a/src/cpu/intel/speedstep/speedstep.c b/src/cpu/intel/speedstep/speedstep.c
new file mode 100644
index 0000000000..f2cff04dae
--- /dev/null
+++ b/src/cpu/intel/speedstep/speedstep.c
@@ -0,0 +1,189 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 secunet Security Networks AG
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <types.h>
+#include <string.h>
+#include <arch/cpu.h>
+#include <cpu/x86/msr.h>
+#include <console/console.h>
+#include <cpu/intel/speedstep.h>
+
+/**
+ * @brief Gather speedstep limits for current processor
+ *
+ * At least power limits are processor type specific. Penryn introduced half
+ * steps in bus ratios. Don't know about Atom processors.
+ */
+static void speedstep_get_limits(sst_params_t *const params)
+{
+ msr_t msr;
+
+ const uint16_t cpu_id = (cpuid_eax(1) >> 4) & 0xffff;
+ const uint32_t state_mask =
+ /* Penryn supports non integer (i.e. half) ratios. */
+ ((cpu_id == 0x1067) ? SPEEDSTEP_RATIO_NONINT : 0)
+ | SPEEDSTEP_RATIO_VALUE_MASK | SPEEDSTEP_VID_MASK;
+
+ /* Initialize params to zero. */
+ memset(params, '\0', sizeof(*params));
+
+ /* Read Super-LFM parameters. */
+ if (((rdmsr(MSR_EXTENDED_CONFIG).lo >> 27) & 3) == 3) {/*supported and
+ enabled bits */
+ msr = rdmsr(MSR_FSB_CLOCK_VCC);
+ params->slfm = SPEEDSTEP_STATE_FROM_MSR(msr.lo, state_mask);
+ params->slfm.dynfsb = 1;
+ params->slfm.is_slfm = 1;
+ }
+
+ /* Read normal minimum parameters. */
+ msr = rdmsr(MSR_THERM2_CTL);
+ params->min = SPEEDSTEP_STATE_FROM_MSR(msr.lo, state_mask);
+
+ /* Read normal maximum parameters. */
+ /* Newer CPUs provide the normal maximum settings in
+ IA32_PLATFORM_ID. The values in IA32_PERF_STS change
+ when using turbo mode. */
+ msr = rdmsr(IA32_PLATFORM_ID);
+ params->max = SPEEDSTEP_STATE_FROM_MSR(msr.lo, state_mask);
+ if (cpu_id == 0x006e) {
+ /* Looks like Yonah CPUs don't have the frequency ratio in
+ IA32_PLATFORM_ID. Use IA32_PERF_STS instead, the reading
+ should be reliable as those CPUs don't have turbo mode. */
+ msr = rdmsr(IA32_PERF_STS);
+ params->max.ratio = (msr.hi & SPEEDSTEP_RATIO_VALUE_MASK)
+ >> SPEEDSTEP_RATIO_SHIFT;
+ }
+
+ /* Read turbo parameters. */
+ msr = rdmsr(MSR_FSB_CLOCK_VCC);
+ if ((msr.hi & (1 << (63 - 32))) &&
+ /* supported and */
+ !(rdmsr(IA32_MISC_ENABLES).hi & (1 << (38 - 32)))) {
+ /* not disabled */
+ params->turbo = SPEEDSTEP_STATE_FROM_MSR(msr.hi, state_mask);
+ params->turbo.is_turbo = 1;
+ }
+
+ /* Set power limits by processor type. */
+ /* Defined values match the normal voltage versions only. But
+ they are only a hint for OSPM, so this should not hurt much. */
+ switch (cpu_id) {
+ case 0x006e:
+ /* Yonah */
+ params->min.power = SPEEDSTEP_MIN_POWER_YONAH;
+ params->max.power = SPEEDSTEP_MAX_POWER_YONAH;
+ break;
+ case 0x1067:
+ /* Penryn */
+ params->slfm.power = SPEEDSTEP_SLFM_POWER_PENRYN;
+ params->min.power = SPEEDSTEP_MIN_POWER_PENRYN;
+ params->max.power = SPEEDSTEP_MAX_POWER_PENRYN;
+ params->turbo.power = SPEEDSTEP_MAX_POWER_PENRYN;
+ break;
+ case 0x006f:
+ /* Merom */
+ default:
+ /* Use Merom values by default (as before). */
+ params->slfm.power = SPEEDSTEP_SLFM_POWER_MEROM;
+ params->min.power = SPEEDSTEP_MIN_POWER_MEROM;
+ params->max.power = SPEEDSTEP_MAX_POWER_MEROM;
+ params->turbo.power = SPEEDSTEP_MAX_POWER_MEROM;
+ break;
+ }
+}
+
+/**
+ * @brief Generate full p-states table from processor parameters
+ *
+ * This is generic code and should work at least for Merom and Penryn
+ * processors. It is used to generate acpi tables and configure EMTTM.
+ */
+void speedstep_gen_pstates(sst_table_t *const table)
+{
+ sst_params_t params;
+ /* Gather speedstep limits. */
+ speedstep_get_limits(&params);
+
+
+ /*\ First, find the number of normal states: \*/
+
+ /* Calculate with doubled values to work
+ around non-integer (.5) bus ratios. */
+ const int power_diff2 = (params.max.power - params.min.power) * 2;
+ const int vid_diff2 = (params.max.vid - params.min.vid) * 2;
+ const int max_ratio2 = SPEEDSTEP_DOUBLE_RATIO(params.max);
+ const int min_ratio2 = SPEEDSTEP_DOUBLE_RATIO(params.min);
+ const int ratio_diff2 = max_ratio2 - min_ratio2;
+ /* Calculate number of normal states (LFM to HFM, min to max). */
+ /* Increase step size, until all states fit into the table.
+ (Note: First try should always work, if
+ SPEEDSTEP_MAX_NORMAL_STATES is set correctly.) */
+ int states, step2 = 0;
+ do {
+ step2 += 2 * 2; /* Must be a multiple of 2 (doubled). */
+ states = ratio_diff2 / step2 + 1;
+ } while (states > SPEEDSTEP_MAX_NORMAL_STATES);
+ if (step2 > 4)
+ printk(BIOS_INFO, "Enhanced Speedstep processor with "
+ "more than %d possible p-states.\n",
+ SPEEDSTEP_MAX_NORMAL_STATES);
+ if (states < 2) /* Report at least two normal states. */
+ states = 2;
+
+
+ /*\ Now, fill the table: \*/
+
+ table->num_states = 0;
+
+ /* Add turbo state if supported. */
+ if (params.turbo.is_turbo)
+ table->states[table->num_states++] = params.turbo;
+
+ /* Add HFM first. */
+ table->states[table->num_states] = params.max;
+ /* Work around HFM and LFM having the same bus ratio. */
+ if ((params.max.dynfsb == params.min.dynfsb) &&
+ (params.max.nonint == params.min.nonint) &&
+ (params.max.ratio == params.min.ratio))
+ table->states[table->num_states].vid = params.min.vid;
+ ++table->num_states;
+ --states;
+
+ /* Now, add all other normal states based on LFM (min). */
+ const int power_step = (power_diff2 / states) / 2;
+ const int vid_step = (vid_diff2 / states) / 2;
+ const int ratio_step = step2 / 2;
+ int power = params.min.power + (states - 1) * power_step;
+ int vid = params.min.vid + (states - 1) * vid_step;
+ int ratio = params.min.ratio + (states - 1) * ratio_step;
+ for (; states > 0; --states) {
+ table->states[table->num_states++] =
+ (sst_state_t){ 0, 0, ratio, vid, 0, 0, power };
+ power -= power_step;
+ vid -= vid_step;
+ ratio -= ratio_step;
+ }
+
+ /* At last, add Super-LFM state if supported. */
+ if (params.slfm.is_slfm)
+ table->states[table->num_states++] = params.slfm;
+}
diff --git a/src/include/cpu/intel/speedstep.h b/src/include/cpu/intel/speedstep.h
index c3cd2d2efc..b5d1d68cda 100644
--- a/src/include/cpu/intel/speedstep.h
+++ b/src/include/cpu/intel/speedstep.h
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2007-2009 coresystems GmbH
+ * 2012 secunet Security Networks AG
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -19,6 +20,11 @@
* MA 02110-1301 USA
*/
+#ifndef CPU_INTEL_SPEEDSTEP_H
+#define CPU_INTEL_SPEEDSTEP_H
+
+#include <stdint.h>
+
/* Magic value used to locate speedstep configuration in the device tree */
#define SPEEDSTEP_APIC_MAGIC 0xACAC
@@ -39,3 +45,71 @@
#define IA32_PERF_CTL 0x199
#define MSR_THERM2_CTL 0x19D
#define IA32_MISC_ENABLES 0x1A0
+#define MSR_FSB_CLOCK_VCC 0xce
+#define MSR_EXTENDED_CONFIG 0xee
+
+
+typedef struct {
+ uint8_t dynfsb : 1; /* whether this is SLFM */
+ uint8_t nonint : 1; /* add .5 to ratio */
+ uint8_t ratio : 6;
+ uint8_t vid;
+ uint8_t is_turbo;
+ uint8_t is_slfm;
+ uint32_t power;
+} sst_state_t;
+#define SPEEDSTEP_RATIO_SHIFT 8
+#define SPEEDSTEP_RATIO_DYNFSB_SHIFT (7 + SPEEDSTEP_RATIO_SHIFT)
+#define SPEEDSTEP_RATIO_DYNFSB (1 << SPEEDSTEP_RATIO_DYNFSB_SHIFT)
+#define SPEEDSTEP_RATIO_NONINT_SHIFT (6 + SPEEDSTEP_RATIO_SHIFT)
+#define SPEEDSTEP_RATIO_NONINT (1 << SPEEDSTEP_RATIO_NONINT_SHIFT)
+#define SPEEDSTEP_RATIO_VALUE_MASK (0x1f << SPEEDSTEP_RATIO_SHIFT)
+#define SPEEDSTEP_VID_MASK 0x3f
+#define SPEEDSTEP_STATE_FROM_MSR(val, mask) ((sst_state_t){ \
+ 0, /* dynfsb won't be read. */ \
+ ((val & mask) & SPEEDSTEP_RATIO_NONINT) ? 1 : 0, \
+ (((val & mask) & SPEEDSTEP_RATIO_VALUE_MASK) \
+ >> SPEEDSTEP_RATIO_SHIFT), \
+ (val & mask) & SPEEDSTEP_VID_MASK, \
+ 0, /* not turbo by default */ \
+ 0, /* not slfm by default */ \
+ 0 /* power is hardcoded in software. */ \
+ })
+#define SPEEDSTEP_ENCODE_STATE(state) ( \
+ ((uint16_t)(state).dynfsb << SPEEDSTEP_RATIO_DYNFSB_SHIFT) | \
+ ((uint16_t)(state).nonint << SPEEDSTEP_RATIO_NONINT_SHIFT) | \
+ ((uint16_t)(state).ratio << SPEEDSTEP_RATIO_SHIFT) | \
+ ((uint16_t)(state).vid & SPEEDSTEP_VID_MASK))
+#define SPEEDSTEP_DOUBLE_RATIO(state) ( \
+ ((uint8_t)(state).ratio * 2) + (state).nonint)
+
+typedef struct {
+ sst_state_t slfm;
+ sst_state_t min;
+ sst_state_t max;
+ sst_state_t turbo;
+} sst_params_t;
+
+/* Looking at core2's spec, the highest normal bus ratio for an eist enabled
+ processor is 14, the lowest is always 6. This makes 5 states with the
+ minimal step width of 2. With turbo mode and super LFM we have at most 7. */
+#define SPEEDSTEP_MAX_NORMAL_STATES 5
+#define SPEEDSTEP_MAX_STATES (SPEEDSTEP_MAX_NORMAL_STATES + 2)
+typedef struct {
+ /* Table of p-states for EMTTM and ACPI by decreasing performance. */
+ sst_state_t states[SPEEDSTEP_MAX_STATES];
+ int num_states;
+} sst_table_t;
+
+void speedstep_gen_pstates(sst_table_t *);
+
+#define SPEEDSTEP_MAX_POWER_YONAH 31000
+#define SPEEDSTEP_MIN_POWER_YONAH 13100
+#define SPEEDSTEP_MAX_POWER_MEROM 35000
+#define SPEEDSTEP_MIN_POWER_MEROM 25000
+#define SPEEDSTEP_SLFM_POWER_MEROM 12000
+#define SPEEDSTEP_MAX_POWER_PENRYN 35000
+#define SPEEDSTEP_MIN_POWER_PENRYN 15000
+#define SPEEDSTEP_SLFM_POWER_PENRYN 12000
+
+#endif /* CPU_INTEL_SPEEDSTEP_H */