summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/cpu/samsung/exynos5-common/Makefile.inc4
-rw-r--r--src/cpu/samsung/exynos5-common/displayport/Kconfig2
-rw-r--r--src/cpu/samsung/exynos5-common/displayport/Makefile.inc2
-rw-r--r--src/cpu/samsung/exynos5-common/displayport/chip.h40
-rw-r--r--src/cpu/samsung/exynos5-common/displayport/displayport.c107
-rw-r--r--src/cpu/samsung/exynos5-common/exynos-fb.c594
-rw-r--r--src/cpu/samsung/exynos5-common/s5p-dp-core.h256
-rw-r--r--src/cpu/samsung/exynos5-common/s5p-dp-reg.c481
-rw-r--r--src/mainboard/google/snow/Kconfig3
-rw-r--r--src/mainboard/google/snow/devicetree.cb14
-rw-r--r--src/mainboard/google/snow/romstage.c8
11 files changed, 1509 insertions, 2 deletions
diff --git a/src/cpu/samsung/exynos5-common/Makefile.inc b/src/cpu/samsung/exynos5-common/Makefile.inc
index 47abe0f058..7abd75c082 100644
--- a/src/cpu/samsung/exynos5-common/Makefile.inc
+++ b/src/cpu/samsung/exynos5-common/Makefile.inc
@@ -19,3 +19,7 @@ ramstage-y += pwm.c # needed by timer.c
ramstage-y += timer.c
ramstage-y += gpio.c
ramstage-y += i2c.c
+ramstage-y += s5p-dp-reg.c
+ramstage-y += exynos-fb.c
+
+subdirs-y += displayport
diff --git a/src/cpu/samsung/exynos5-common/displayport/Kconfig b/src/cpu/samsung/exynos5-common/displayport/Kconfig
new file mode 100644
index 0000000000..26d1422a8c
--- /dev/null
+++ b/src/cpu/samsung/exynos5-common/displayport/Kconfig
@@ -0,0 +1,2 @@
+config EXYNOS_DISPLAYPORT
+ bool
diff --git a/src/cpu/samsung/exynos5-common/displayport/Makefile.inc b/src/cpu/samsung/exynos5-common/displayport/Makefile.inc
new file mode 100644
index 0000000000..7c52eaf6f7
--- /dev/null
+++ b/src/cpu/samsung/exynos5-common/displayport/Makefile.inc
@@ -0,0 +1,2 @@
+ramstage-$(CONFIG_EXYNOS_DISPLAYPORT) += displayport.c
+
diff --git a/src/cpu/samsung/exynos5-common/displayport/chip.h b/src/cpu/samsung/exynos5-common/displayport/chip.h
new file mode 100644
index 0000000000..53b7836268
--- /dev/null
+++ b/src/cpu/samsung/exynos5-common/displayport/chip.h
@@ -0,0 +1,40 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef CPU_SAMSUNG_EXYNOS5_COMMON_DISPLAYPORT_H
+#define CPU_SAMSUNG_EXYNOS5_COMMON_DISPLAYPORT_H
+
+struct cpu_samsung_exynos5_common_displayport_config {
+ /* special magic numbers! */
+ int clkval_f;
+ int upper_margin;
+ int lower_margin;
+ int vsync;
+ int left_margin;
+ int right_margin;
+ int hsync;
+
+ int xres;
+ int yres;
+ int bpp;
+
+ u32 lcdbase;
+};
+
+#endif /* CPU_SAMSUNG_EXYNOS5-COMMON_DISPLAYPORT_H */
diff --git a/src/cpu/samsung/exynos5-common/displayport/displayport.c b/src/cpu/samsung/exynos5-common/displayport/displayport.c
new file mode 100644
index 0000000000..1c08bc710e
--- /dev/null
+++ b/src/cpu/samsung/exynos5-common/displayport/displayport.c
@@ -0,0 +1,107 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdlib.h>
+#include <string.h>
+#include <delay.h>
+#include <arch/io.h>
+#include <device/device.h>
+
+/* we distinguish a display port device from a raw graphics device because there are
+ * dramatic differences in startup depending on graphics usage. To make startup fast
+ * and easier to understand and debug we explicitly name this common case. The alternate
+ * approach, involving lots of machine and callbacks, is hard to debug and verify.
+ */
+static void exynos_displayport_init(void)
+{
+ struct cpu_samsung_exynos5_common_displayport_config *conf = dev->chip_info;
+ /* put these on the stack. If, at some point, we want to move this code to a
+ * pre-ram stage, it will be much easier.
+ */
+ vidinfo_t vi;
+ struct exynos5_fimd_panel panel;
+ void *lcdbase;
+
+ memset(vi, 0, sizeof(vi));
+ memset(panel, 0, sizeof(panel));
+
+ panel.is_dp = 1; /* Display I/F is eDP */
+ /* while it is true that we did a memset to zero,
+ * we leave some 'set to zero' entries here to make
+ * it clear what's going on. Graphics is confusing.
+ */
+ panel.is_mipi = 0;
+ panel.fixvclk = 0;
+ panel.ivclk = 0;
+ panel.clkval_f = conf->clkval_f;
+ panel.upper_margin = conf->upper_margin;
+ panel.lower_margin = conf->lower_margin;
+ panel.vsync = conf->vsync;
+ panel.left_margin = conf->left_margin;
+ panel.right_margin = conf->right_margin;
+ panel.hsync = conf->hsync;
+
+ vi->vl_col = conf->xres;
+ vi->fl_row = conf->yres;
+ vi->vl_bpix = conf->bpp;
+ vi->cmap = cbmem_reserve(64*1024); /* The size is a magic number from hardware. */
+
+ lcdbase = conf->lcdbase;
+ printk(BIOS_DEBUG, "Initializing exynos VGA\n");
+ ret = lcd_ctrl_init(&vi, &panel, lcdbase);
+#if 0
+ ret = board_dp_lcd_vdd(blob, &wait_ms);
+ ret = board_dp_bridge_setup(blob, &wait_ms);
+ while (tries < 5) {
+ ret = board_dp_bridge_init(blob, &wait_ms);
+ ret = board_dp_hotplug(blob, &wait_ms);
+ if (ret) {
+ ret = board_dp_bridge_reset(blob, &wait_ms);
+ continue;
+ }
+ ret = dp_controller_init(blob, &wait_ms);
+ ret = board_dp_backlight_vdd(blob, &wait_ms);
+ ret = board_dp_backlight_pwm(blob, &wait_ms);
+ ret = board_dp_backlight_en(blob, &wait_ms);
+ }
+#endif
+}
+
+static void exynos_displayport_noop(device_t dummy)
+{
+}
+
+static struct device_operations exynos_displayport_operations = {
+ .read_resources = exynos_displayport_noop,
+ .set_resources = exynos_displayport_noop,
+ .enable_resources = exynos_displayport_noop,
+ .init = exynos_displayport_init,
+ .scan_bus = exynos_displayport_noop,
+};
+
+static void exynos_displayport_enable(struct device *dev)
+{
+ if (dev->link_list != NULL)
+ dev->ops = &exynos_displayport_operations;
+}
+
+struct chip_operations drivers_i2c_exynos_displayport_ops = {
+ CHIP_NAME("exynos displayport")
+ .enable_dev = exynos_displayport_enable;
+};
diff --git a/src/cpu/samsung/exynos5-common/exynos-fb.c b/src/cpu/samsung/exynos5-common/exynos-fb.c
new file mode 100644
index 0000000000..30d0767923
--- /dev/null
+++ b/src/cpu/samsung/exynos5-common/exynos-fb.c
@@ -0,0 +1,594 @@
+/*
+ * LCD driver for Exynos
+ *
+ * Copyright 2013 Google Inc.
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <arch/io.h>
+#include <stdlib.h>
+#include <string.h>
+#include <console/console.h>
+#include <cpu/samsung/exynos5250/cpu.h>
+#include <cpu/samsung/exynos5250/power.h>
+#include <cpu/samsung/exynos5250/sysreg.h>
+#include <drivers/maxim/max77686/max77686.h>
+
+#include "device/i2c.h"
+#include "cpu/samsung/exynos5-common/i2c.h"
+#include "cpu/samsung/exynos5250/dsim.h"
+#include "cpu/samsung/exynos5250/fimd.h"
+
+#include "cpu/samsung/exynos5250/s5p-dp.h"
+#include "s5p-dp-core.h"
+
+/* To help debug any init errors here, define a list of possible errors */
+enum {
+ ERR_PLL_NOT_UNLOCKED = 2,
+ ERR_VIDEO_CLOCK_BAD,
+ ERR_VIDEO_STREAM_BAD,
+ ERR_DPCD_READ_ERROR1, /* 5 */
+
+ ERR_DPCD_WRITE_ERROR1,
+ ERR_DPCD_READ_ERROR2,
+ ERR_DPCD_WRITE_ERROR2,
+ ERR_INVALID_LANE,
+ ERR_PLL_NOT_LOCKED, /* 10 */
+
+ ERR_PRE_EMPHASIS_LEVELS,
+ ERR_LINK_RATE_ABNORMAL,
+ ERR_MAX_LANE_COUNT_ABNORMAL,
+ ERR_LINK_TRAINING_FAILURE,
+ ERR_MISSING_DP_BASE, /* 15 */
+
+ ERR_NO_FDT_NODE,
+};
+/* ok, this is stupid, but we're going to leave the variables in here until we know it works.
+ * one cleanup task at a time.
+ */
+enum stage_t {
+ STAGE_START = 0,
+ STAGE_LCD_VDD,
+ STAGE_BRIDGE_SETUP,
+ STAGE_BRIDGE_INIT,
+ STAGE_BRIDGE_RESET,
+ STAGE_HOTPLUG,
+ STAGE_DP_CONTROLLER,
+ STAGE_BACKLIGHT_VDD,
+ STAGE_BACKLIGHT_PWM,
+ STAGE_BACKLIGHT_EN,
+ STAGE_DONE,
+};
+
+int lcd_line_length;
+int lcd_color_fg;
+int lcd_color_bg;
+
+void *lcd_base; /* Start of framebuffer memory */
+void *lcd_console_address; /* Start of console buffer */
+
+short console_col;
+short console_row;
+
+
+#ifdef CONFIG_EXYNOS_DISPLAYPORT
+static struct s5p_dp_device dp_device;
+
+#endif
+
+/* Bypass FIMD of DISP1_BLK */
+static void fimd_bypass(void)
+{
+ struct exynos5_sysreg *sysreg = samsung_get_base_sysreg();
+
+ /*setbits_le32(&sysreg->disp1blk_cfg, FIMDBYPASS_DISP1);*/
+ sysreg->disp1blk_cfg &= ~FIMDBYPASS_DISP1;
+}
+
+/* Calculate the size of Framebuffer from the resolution */
+static u32 calc_fbsize(vidinfo_t *panel_info)
+{
+ /* They had PAGE_SIZE here instead of 4096.
+ * but that's a totally arbitrary number -- everything nowadays
+ * has lots of page sizes.
+ * So keep it obvious.
+ */
+ return ALIGN((panel_info->vl_col * panel_info->vl_row *
+ ((1<<panel_info->vl_bpix) / 8)), 4096);
+}
+
+/*
+ * Initialize display controller.
+ *
+ * @param lcdbase pointer to the base address of framebuffer.
+ * @pd pointer to the main panel_data structure
+ */
+void fb_init(vidinfo_t *panel_info, void *lcdbase, struct exynos5_fimd_panel *pd)
+{
+ unsigned int val;
+ u32 fbsize;
+ struct exynos5_fimd *fimd =
+ samsung_get_base_fimd();
+ struct exynos5_disp_ctrl *disp_ctrl =
+ samsung_get_base_disp_ctrl();
+
+ writel(pd->ivclk | pd->fixvclk, &disp_ctrl->vidcon1);
+ val = ENVID_ON | ENVID_F_ON | (pd->clkval_f << CLKVAL_F_OFFSET);
+ writel(val, &fimd->vidcon0);
+
+ val = (pd->vsync << VSYNC_PULSE_WIDTH_OFFSET) |
+ (pd->lower_margin << V_FRONT_PORCH_OFFSET) |
+ (pd->upper_margin << V_BACK_PORCH_OFFSET);
+ writel(val, &disp_ctrl->vidtcon0);
+
+ val = (pd->hsync << HSYNC_PULSE_WIDTH_OFFSET) |
+ (pd->right_margin << H_FRONT_PORCH_OFFSET) |
+ (pd->left_margin << H_BACK_PORCH_OFFSET);
+ writel(val, &disp_ctrl->vidtcon1);
+
+ val = ((pd->xres - 1) << HOZVAL_OFFSET) |
+ ((pd->yres - 1) << LINEVAL_OFFSET);
+ writel(val, &disp_ctrl->vidtcon2);
+
+ writel((unsigned int)lcd_base, &fimd->vidw00add0b0);
+
+ fbsize = calc_fbsize(panel_info);
+ writel((unsigned int)lcd_base + fbsize, &fimd->vidw00add1b0);
+
+ writel(pd->xres * 2, &fimd->vidw00add2);
+
+ val = ((pd->xres - 1) << OSD_RIGHTBOTX_F_OFFSET);
+ val |= ((pd->yres - 1) << OSD_RIGHTBOTY_F_OFFSET);
+ writel(val, &fimd->vidosd0b);
+ writel(pd->xres * pd->yres, &fimd->vidosd0c);
+
+ setbits_le32(&fimd->shadowcon, CHANNEL0_EN);
+
+ val = BPPMODE_F_RGB_16BIT_565 << BPPMODE_F_OFFSET;
+ val |= ENWIN_F_ENABLE | HALF_WORD_SWAP_EN;
+ writel(val, &fimd->wincon0);
+
+ /* DPCLKCON_ENABLE */
+ writel(1 << 1, &fimd->dpclkcon);
+}
+
+void exynos_fimd_disable(void);
+void exynos_fimd_disable(void)
+{
+ struct exynos5_fimd *fimd = samsung_get_base_fimd();
+
+ writel(0, &fimd->wincon0);
+ clrbits_le32(&fimd->shadowcon, CHANNEL0_EN);
+}
+
+/*
+ * Configure DP in slave mode and wait for video stream.
+ *
+ * param dp pointer to main s5p-dp structure
+ * param video_info pointer to main video_info structure.
+ * return status
+ */
+static int s5p_dp_config_video(struct s5p_dp_device *dp,
+ struct video_info *video_info)
+{
+ int timeout = 0;
+ u32 start;
+ struct exynos5_dp *base = dp->base;
+
+ s5p_dp_config_video_slave_mode(dp, video_info);
+
+ s5p_dp_set_video_color_format(dp, video_info->color_depth,
+ video_info->color_space,
+ video_info->dynamic_range,
+ video_info->ycbcr_coeff);
+
+ if (s5p_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
+ debug("PLL is not locked yet.\n");
+ return -ERR_PLL_NOT_UNLOCKED;
+ }
+
+ start = get_timer(0);
+ do {
+ if (s5p_dp_is_slave_video_stream_clock_on(dp) == 0) {
+ timeout++;
+ break;
+ }
+ } while (get_timer(start) <= STREAM_ON_TIMEOUT);
+
+ if (!timeout) {
+ debug("Video Clock Not ok\n");
+ return -ERR_VIDEO_CLOCK_BAD;
+ }
+
+ /* Set to use the register calculated M/N video */
+ s5p_dp_set_video_cr_mn(dp, CALCULATED_M, 0, 0);
+
+ clrbits_le32(&base->video_ctl_10, FORMAT_SEL);
+
+ /* Disable video mute */
+ clrbits_le32(&base->video_ctl_1, HDCP_VIDEO_MUTE);
+
+ /* Configure video slave mode */
+ s5p_dp_enable_video_master(dp);
+
+ /* Enable video */
+ setbits_le32(&base->video_ctl_1, VIDEO_EN);
+ timeout = s5p_dp_is_video_stream_on(dp);
+
+ if (timeout) {
+ debug("Video Stream Not on\n");
+ return -ERR_VIDEO_STREAM_BAD;
+ }
+
+ return 0;
+}
+
+/*
+ * Set DP to enhanced mode. We use this for EVT1
+ * param dp pointer to main s5p-dp structure
+ * return status
+ */
+static int s5p_dp_enable_rx_to_enhanced_mode(struct s5p_dp_device *dp)
+{
+ u8 data;
+
+ if (s5p_dp_read_byte_from_dpcd(dp, DPCD_ADDR_LANE_COUNT_SET, &data)) {
+ debug("DPCD read error\n");
+ return -ERR_DPCD_READ_ERROR1;
+ }
+
+ if (s5p_dp_write_byte_to_dpcd(dp, DPCD_ADDR_LANE_COUNT_SET,
+ DPCD_ENHANCED_FRAME_EN |
+ (data & DPCD_LANE_COUNT_SET_MASK))) {
+ debug("DPCD write error\n");
+ return -ERR_DPCD_WRITE_ERROR1;
+ }
+
+ return 0;
+}
+
+/*
+ * Enable scrambles mode. We use this for EVT1
+ * param dp pointer to main s5p-dp structure
+ * return status
+ */
+static int s5p_dp_enable_scramble(struct s5p_dp_device *dp)
+{
+ u8 data;
+ struct exynos5_dp *base = dp->base;
+
+ clrbits_le32(&base->dp_training_ptn_set, SCRAMBLING_DISABLE);
+
+ if (s5p_dp_read_byte_from_dpcd(dp, DPCD_ADDR_TRAINING_PATTERN_SET,
+ &data)) {
+ debug("DPCD read error\n");
+ return -ERR_DPCD_READ_ERROR2;
+ }
+
+ if (s5p_dp_write_byte_to_dpcd(dp, DPCD_ADDR_TRAINING_PATTERN_SET,
+ (u8)(data & ~DPCD_SCRAMBLING_DISABLED))) {
+ debug("DPCD write error\n");
+ return -ERR_DPCD_WRITE_ERROR2;
+ }
+
+ return 0;
+}
+
+/*
+ * Reset DP and prepare DP for init training
+ * param dp pointer to main s5p-dp structure
+ */
+static int s5p_dp_init_dp(struct s5p_dp_device *dp)
+{
+ int ret, i;
+ struct exynos5_dp *base = dp->base;
+
+ for (i = 0; i < DP_INIT_TRIES; i++) {
+ s5p_dp_reset(dp);
+
+ /* SW defined function Normal operation */
+ clrbits_le32(&base->func_en_1, SW_FUNC_EN_N);
+
+ ret = s5p_dp_init_analog_func(dp);
+ if (!ret)
+ break;
+
+ udelay(5000);
+ debug("LCD retry init, attempt=%d ret=%d\n", i, ret);
+ }
+ if (i == DP_INIT_TRIES) {
+ debug("LCD initialization failed, ret=%d\n", ret);
+ return ret;
+ }
+
+ s5p_dp_init_aux(dp);
+
+ return ret;
+}
+
+/*
+ * Set pre-emphasis level
+ * param dp pointer to main s5p-dp structure
+ * param pre_emphasis pre-emphasis level
+ * param lane lane number(0 - 3)
+ * return status
+ */
+static int s5p_dp_set_lane_lane_pre_emphasis(struct s5p_dp_device *dp,
+ int pre_emphasis, int lane)
+{
+ u32 reg;
+ struct exynos5_dp *base = dp->base;
+
+ reg = pre_emphasis << PRE_EMPHASIS_SET_SHIFT;
+ switch (lane) {
+ case 0:
+ writel(reg, &base->ln0_link_trn_ctl);
+ break;
+ case 1:
+ writel(reg, &base->ln1_link_trn_ctl);
+ break;
+
+ case 2:
+ writel(reg, &base->ln2_link_trn_ctl);
+ break;
+
+ case 3:
+ writel(reg, &base->ln3_link_trn_ctl);
+ break;
+ default:
+ debug("%s: Invalid lane %d\n", __func__, lane);
+ return -ERR_INVALID_LANE;
+ }
+ return 0;
+}
+
+/*
+ * Read supported bandwidth type
+ * param dp pointer to main s5p-dp structure
+ * param bandwidth pointer to variable holding bandwidth type
+ */
+static void s5p_dp_get_max_rx_bandwidth(struct s5p_dp_device *dp,
+ u8 *bandwidth)
+{
+ u8 data;
+
+ /*
+ * For DP rev.1.1, Maximum link rate of Main Link lanes
+ * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps
+ */
+ s5p_dp_read_byte_from_dpcd(dp, DPCD_ADDR_MAX_LINK_RATE, &data);
+ *bandwidth = data;
+}
+
+/*
+ * Reset DP and prepare DP for init training
+ * param dp pointer to main s5p-dp structure
+ * param lane_count pointer to variable holding no of lanes
+ */
+static void s5p_dp_get_max_rx_lane_count(struct s5p_dp_device *dp,
+ u8 *lane_count)
+{
+ u8 data;
+
+ /*
+ * For DP rev.1.1, Maximum number of Main Link lanes
+ * 0x01 = 1 lane, 0x02 = 2 lanes, 0x04 = 4 lanes
+ */
+ s5p_dp_read_byte_from_dpcd(dp, DPCD_ADDR_MAX_LANE_COUNT, &data);
+ *lane_count = data & DPCD_MAX_LANE_COUNT_MASK;
+}
+
+/*
+ * DP H/w Link Training. Set DPCD link rate and bandwidth.
+ * param dp pointer to main s5p-dp structure
+ * param max_lane No of lanes
+ * param max_rate bandwidth
+ * return status
+ */
+static int s5p_dp_hw_link_training(struct s5p_dp_device *dp,
+ unsigned int max_lane,
+ unsigned int max_rate)
+{
+ u32 data;
+ u32 start;
+ int lane;
+ struct exynos5_dp *base = dp->base;
+
+ /* Stop Video */
+ clrbits_le32(&base->video_ctl_1, VIDEO_EN);
+
+ start = get_timer(0);
+ while (s5p_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
+ if (get_timer(start) > PLL_LOCK_TIMEOUT) {
+ /* Ignore this error, and try to continue */
+ printk(BIOS_ERR, "PLL is not locked yet.\n");
+ break;
+ }
+ }
+
+ /* Reset Macro */
+ setbits_le32(&base->dp_phy_test, MACRO_RST);
+
+ /* 10 us is the minimum reset time. */
+ udelay(10);
+
+ clrbits_le32(&base->dp_phy_test, MACRO_RST);
+
+ /* Set TX pre-emphasis to minimum */
+ for (lane = 0; lane < max_lane; lane++)
+ if (s5p_dp_set_lane_lane_pre_emphasis(dp,
+ PRE_EMPHASIS_LEVEL_0, lane)) {
+ debug("Unable to set pre emphasis level\n");
+ return -ERR_PRE_EMPHASIS_LEVELS;
+ }
+
+ /* All DP analog module power up */
+ writel(0x00, &base->dp_phy_pd);
+
+ /* Initialize by reading RX's DPCD */
+ s5p_dp_get_max_rx_bandwidth(dp, &dp->link_train.link_rate);
+ s5p_dp_get_max_rx_lane_count(dp, &dp->link_train.lane_count);
+
+ if ((dp->link_train.link_rate != LINK_RATE_1_62GBPS) &&
+ (dp->link_train.link_rate != LINK_RATE_2_70GBPS)) {
+ debug("Rx Max Link Rate is abnormal :%x !\n",
+ dp->link_train.link_rate);
+ /* Not Retrying */
+ return -ERR_LINK_RATE_ABNORMAL;
+ }
+
+ if (dp->link_train.lane_count == 0) {
+ debug("Rx Max Lane count is abnormal :%x !\n",
+ dp->link_train.lane_count);
+ /* Not retrying */
+ return -ERR_MAX_LANE_COUNT_ABNORMAL;
+ }
+
+ /* Setup TX lane count & rate */
+ if (dp->link_train.lane_count > max_lane)
+ dp->link_train.lane_count = max_lane;
+ if (dp->link_train.link_rate > max_rate)
+ dp->link_train.link_rate = max_rate;
+
+ /* Set link rate and count as you want to establish*/
+ writel(dp->link_train.lane_count, &base->lane_count_set);
+ writel(dp->link_train.link_rate, &base->link_bw_set);
+
+ /* Set sink to D0 (Sink Not Ready) mode. */
+ s5p_dp_write_byte_to_dpcd(dp, DPCD_ADDR_SINK_POWER_STATE,
+ DPCD_SET_POWER_STATE_D0);
+
+ /* Start HW link training */
+ writel(HW_TRAINING_EN, &base->dp_hw_link_training);
+
+ /* Wait unitl HW link training done */
+ s5p_dp_wait_hw_link_training_done(dp);
+
+ /* Get hardware link training status */
+ data = readl(&base->dp_hw_link_training);
+ if (data != 0) {
+ debug(" H/W link training failure: 0x%x\n", data);
+ return -ERR_LINK_TRAINING_FAILURE;
+ }
+
+ /* Get Link Bandwidth */
+ data = readl(&base->link_bw_set);
+
+ dp->link_train.link_rate = data;
+
+ data = readl(&base->lane_count_set);
+ dp->link_train.lane_count = data;
+
+ return 0;
+}
+
+/*
+ * Initialize DP display
+ */
+int dp_controller_init(struct s5p_dp_device *dp_device, unsigned *wait_ms)
+{
+ int ret;
+ struct s5p_dp_device *dp = dp_device;
+ struct exynos5_dp *base;
+
+ //dp->base = (struct exynos5_dp *)addr;
+ /* yes. we're a snow. Yet somehow our config is from a development kit?
+ * This Must Change */
+ //dp->video_info = &smdk5250_dp_config;
+
+ clock_init_dp_clock();
+
+ power_enable_dp_phy();
+ ret = s5p_dp_init_dp(dp);
+ if (ret) {
+ debug("%s: Could not initialize dp\n", __func__);
+ return ret;
+ }
+
+ ret = s5p_dp_hw_link_training(dp, dp->video_info->lane_count,
+ dp->video_info->link_rate);
+ if (ret) {
+ debug("unable to do link train\n");
+ return ret;
+ }
+ /* Minimum delay after H/w Link training */
+ udelay(1000);
+
+ ret = s5p_dp_enable_scramble(dp);
+ if (ret) {
+ debug("unable to set scramble mode\n");
+ return ret;
+ }
+
+ ret = s5p_dp_enable_rx_to_enhanced_mode(dp);
+ if (ret) {
+ debug("unable to set enhanced mode\n");
+ return ret;
+ }
+
+
+ base = dp->base;
+ /* Enable enhanced mode */
+ setbits_le32(&base->sys_ctl_4, ENHANCED);
+
+ writel(dp->link_train.lane_count, &base->lane_count_set);
+ writel(dp->link_train.link_rate, &base->link_bw_set);
+
+ s5p_dp_init_video(dp);
+ ret = s5p_dp_config_video(dp, dp->video_info);
+ if (ret) {
+ debug("unable to config video\n");
+ return ret;
+ }
+
+ /*
+ * This delay is T3 in the LCD timing spec (defined as >200ms). We set
+ * this down to 60ms since that's the approximate maximum amount of time
+ * it'll take a bridge to start outputting LVDS data. The delay of
+ * >200ms is just a conservative value to avoid turning on the backlight
+ * when there's random LCD data on the screen. Shaving 140ms off the
+ * boot is an acceptable trade-off.
+ */
+ *wait_ms = 60;
+ return 0;
+}
+
+/**
+ * Init the LCD controller
+ *
+ * @param lcdbase Base address of LCD frame buffer
+ * @return 0 if ok, -ve error code on error
+ */
+int lcd_ctrl_init(vidinfo_t *panel_info, struct exynos5_fimd_panel *panel_data, void *lcdbase)
+{
+ int ret = 0;
+
+ //vi->res = panel_info->vl_col;
+ //vi->yres = panel_info->vl_row;
+
+ fimd_bypass();
+ fb_init(panel_info, lcdbase, panel_data);
+
+ /* Enable flushing after LCD writes if requested */
+ // forget it. lcd_set_flush_dcache(1);
+ return ret;
+}
diff --git a/src/cpu/samsung/exynos5-common/s5p-dp-core.h b/src/cpu/samsung/exynos5-common/s5p-dp-core.h
new file mode 100644
index 0000000000..67c1990cfd
--- /dev/null
+++ b/src/cpu/samsung/exynos5-common/s5p-dp-core.h
@@ -0,0 +1,256 @@
+/*
+ * Header file for Samsung DP (Display Port) interface driver.
+ *
+ * Copyright 2013 Google Inc.
+ * Copyright (C) 2012 Samsung Electronics Co., Ltd.
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef _S5P_DP_CORE_H
+#define _S5P_DP_CORE_H
+
+#define STREAM_ON_TIMEOUT 100
+#define PLL_LOCK_TIMEOUT 10
+#define DP_INIT_TRIES 10
+#define MAX_CR_LOOP 5
+#define MAX_EQ_LOOP 4
+
+/* Link tare type */
+enum link_rate {
+ LINK_RATE_1_62GBPS = 0x06,
+ LINK_RATE_2_70GBPS = 0x0a
+};
+
+/* Number of lanes supported */
+enum link_lane_count {
+ LANE_COUNT1 = 1,
+ LANE_COUNT2 = 2,
+ LANE_COUNT4 = 4
+};
+
+/* Pre emphasis level */
+enum pre_emphasis_level {
+ PRE_EMPHASIS_LEVEL_0,
+ PRE_EMPHASIS_LEVEL_1,
+ PRE_EMPHASIS_LEVEL_2,
+ PRE_EMPHASIS_LEVEL_3,
+};
+
+/* Type of color space */
+enum color_space {
+ COLOR_RGB,
+ COLOR_YCBCR422,
+ COLOR_YCBCR444
+};
+
+/* Video input Bit Per Color */
+enum color_depth {
+ COLOR_6,
+ COLOR_8,
+ COLOR_10,
+ COLOR_12
+};
+
+/* Type of YCbCr coefficient */
+enum color_coefficient {
+ COLOR_YCBCR601,
+ COLOR_YCBCR709
+};
+
+/* Color range */
+enum dynamic_range {
+ VESA,
+ CEA
+};
+
+/* Status of PLL clock */
+enum pll_status {
+ PLL_UNLOCKED,
+ PLL_LOCKED
+};
+
+/* To choose type of m_value */
+enum clock_recovery_m_value_type {
+ CALCULATED_M,
+ REGISTER_M
+};
+
+struct video_info {
+ enum color_space color_space;
+ enum dynamic_range dynamic_range;
+ enum color_coefficient ycbcr_coeff;
+ enum color_depth color_depth;
+
+ enum link_rate link_rate;
+ enum link_lane_count lane_count;
+
+ char *name;
+
+ unsigned int h_sync_polarity:1;
+ unsigned int v_sync_polarity:1;
+ unsigned int interlaced:1;
+};
+
+struct link_train {
+ u8 link_rate;
+ u8 lane_count;
+};
+
+struct s5p_dp_device {
+ unsigned int irq;
+ struct exynos5_dp *base;
+ struct video_info *video_info;
+ struct link_train link_train;
+};
+
+/* this struct is used by mainboards to pass mode info to the driver */
+typedef struct vidinfo {
+ u16 vl_col;
+ u16 vl_row;
+ u8 vl_bpix;
+ u16 *cmap;
+} vidinfo_t;
+
+/* s5p_dp_reg.c */
+
+/*
+ * Reset DP module
+ *
+ * param dp pointer to main s5p-dp structure
+ */
+void s5p_dp_reset(struct s5p_dp_device *dp);
+/*
+ * Initialize DP to recieve video stream
+ *
+ * param dp pointer to main s5p-dp structure
+ */
+void s5p_dp_init_video(struct s5p_dp_device *dp);
+/*
+ * Check whether PLL is locked
+ *
+ * param dp pointer to main s5p-dp structure
+ * return Lock status
+ */
+unsigned int s5p_dp_get_pll_lock_status(struct s5p_dp_device *dp);
+/*
+ * Initialize analog functions of DP
+ *
+ * param dp pointer to main s5p-dp structure
+ * return 0 on success
+ */
+int s5p_dp_init_analog_func(struct s5p_dp_device *dp);
+/*
+ * Initialize DP for AUX transaction
+ *
+ * param dp pointer to main s5p-dp structure
+ */
+void s5p_dp_init_aux(struct s5p_dp_device *dp);
+
+/*
+ * Start an AUX transaction.
+ *
+ * param dp pointer to main s5p-dp structure
+ */
+int s5p_dp_start_aux_transaction(struct s5p_dp_device *dp);
+
+/*
+ * Write a byte to DPCD register
+ *
+ * param dp pointer to main s5p-dp structure
+ * param reg_addr DPCD register to be written
+ * param data byte data to be written
+ * return write status
+ */
+int s5p_dp_write_byte_to_dpcd(struct s5p_dp_device *dp,
+ unsigned int reg_addr,
+ unsigned char data);
+/*
+ * Read a byte from DPCD register
+ *
+ * param dp pointer to main s5p-dp structure
+ * param reg_addr DPCD register to read
+ * param data read byte data
+ * return read status
+ */
+int s5p_dp_read_byte_from_dpcd(struct s5p_dp_device *dp,
+ unsigned int reg_addr,
+ unsigned char *data);
+/*
+ * Initialize DP video functions
+ *
+ * param dp pointer to main s5p-dp structure
+ */
+//void s5p_dp_init_video(struct s5p_dp_device *dp);
+
+/*
+ * Set color parameters for display
+ *
+ * param dp pointer to main s5p-dp structure
+ * param color_depth Video input Bit Per Color
+ * param color_space Colorimetric format of input video
+ * param dynamic_range VESA range or CEA range
+ * param coeff YCbCr Coefficients of input video
+ */
+void s5p_dp_set_video_color_format(struct s5p_dp_device *dp,
+ unsigned int color_depth,
+ unsigned int color_space,
+ unsigned int dynamic_range,
+ unsigned int coeff);
+/*
+ * Check whether video clock is on
+ *
+ * param dp pointer to main s5p-dp structure
+ * return clock status
+ */
+int s5p_dp_is_slave_video_stream_clock_on(struct s5p_dp_device *dp);
+/*
+ * Check whether video clock is on
+ *
+ * param dp pointer to main s5p-dp structure
+ * param type clock_recovery_m_value_type
+ * param m_value to caluculate m_vid value
+ * param n_value to caluculate n_vid value
+ */
+void s5p_dp_set_video_cr_mn(struct s5p_dp_device *dp,
+ enum clock_recovery_m_value_type type,
+ unsigned int m_value,
+ unsigned int n_value);
+/*
+ * Set DP to video slave mode thereby enabling video master
+ *
+ * param dp pointer to main s5p-dp structure
+ */
+void s5p_dp_enable_video_master(struct s5p_dp_device *dp);
+/*
+ * Check whether video stream is on
+ *
+ * param dp pointer to main s5p-dp structure
+ * return video stream status
+ */
+int s5p_dp_is_video_stream_on(struct s5p_dp_device *dp);
+/*
+ * Configure DP in slave mode
+ *
+ * param dp pointer to main s5p-dp structure
+ * param video_info pointer to main video_info structure.
+ */
+void s5p_dp_config_video_slave_mode(struct s5p_dp_device *dp,
+ struct video_info *video_info);
+
+/*
+ * Wait unitl HW link training done
+ *
+ * param dp pointer to main s5p-dp structure
+ */
+void s5p_dp_wait_hw_link_training_done(struct s5p_dp_device *dp);
+
+/* startup and init */
+void fb_init(vidinfo_t *panel_info, void *lcdbase, struct exynos5_fimd_panel *pd);
+int dp_controller_init(struct s5p_dp_device *dp_device, unsigned *wait_ms);
+int lcd_ctrl_init(vidinfo_t *panel_info, struct exynos5_fimd_panel *panel_data, void *lcdbase);
+#endif /* _S5P_DP_CORE_H */
diff --git a/src/cpu/samsung/exynos5-common/s5p-dp-reg.c b/src/cpu/samsung/exynos5-common/s5p-dp-reg.c
new file mode 100644
index 0000000000..adb64a8e10
--- /dev/null
+++ b/src/cpu/samsung/exynos5-common/s5p-dp-reg.c
@@ -0,0 +1,481 @@
+/*
+ * Samsung DP (Display port) register interface driver.
+ *
+ * Copyright (C) 2012 Samsung Electronics Co., Ltd.
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <common.h>
+#include <arch/io.h>
+#include <cpu/samsung/exynos5-common/clk.h>
+#include <cpu/samsung/exynos5250/cpu.h>
+#include <cpu/samsung/exynos5250/periph.h>
+#include <cpu/samsung/exynos5250/s5p-dp.h>
+#include "cpu/samsung/exynos5250/fimd.h"
+#include "s5p-dp-core.h"
+
+void s5p_dp_reset(struct s5p_dp_device *dp)
+{
+ u32 reg;
+ struct exynos5_dp *base = dp->base;
+
+ writel(RESET_DP_TX, &base->dp_tx_sw_reset);
+
+ /* Stop Video */
+ clrbits_le32(&base->video_ctl_1, VIDEO_EN);
+ clrbits_le32(&base->video_ctl_1, HDCP_VIDEO_MUTE);
+
+ reg = MASTER_VID_FUNC_EN_N | SLAVE_VID_FUNC_EN_N |
+ AUD_FIFO_FUNC_EN_N | AUD_FUNC_EN_N |
+ HDCP_FUNC_EN_N | SW_FUNC_EN_N;
+ writel(reg, &base->func_en_1);
+
+ reg = SSC_FUNC_EN_N | AUX_FUNC_EN_N |
+ SERDES_FIFO_FUNC_EN_N |
+ LS_CLK_DOMAIN_FUNC_EN_N;
+ writel(reg, &base->func_en_2);
+
+ udelay(20);
+
+ reg = LANE3_MAP_LOGIC_LANE_3 | LANE2_MAP_LOGIC_LANE_2 |
+ LANE1_MAP_LOGIC_LANE_1 | LANE0_MAP_LOGIC_LANE_0;
+
+ writel(reg, &base->lane_map);
+
+ writel(0x0, &base->sys_ctl_1);
+ writel(0x40, &base->sys_ctl_2);
+ writel(0x0, &base->sys_ctl_3);
+ writel(0x0, &base->sys_ctl_4);
+
+ writel(0x0, &base->pkt_send_ctl);
+ writel(0x0, &base->dp_hdcp_ctl);
+
+ writel(0x5e, &base->dp_hpd_deglitch_l);
+ writel(0x1a, &base->dp_hpd_deglitch_h);
+
+ writel(0x10, &base->dp_debug_ctl);
+
+ writel(0x0, &base->dp_phy_test);
+
+ writel(0x0, &base->dp_video_fifo_thrd);
+ writel(0x20, &base->dp_audio_margin);
+
+ writel(0x4, &base->m_vid_gen_filter_th);
+ writel(0x2, &base->m_aud_gen_filter_th);
+
+ writel(0x00000101, &base->soc_general_ctl);
+
+ /* Set Analog Parameters */
+ writel(0x10, &base->analog_ctl_1);
+ writel(0x0C, &base->analog_ctl_2);
+ writel(0x85, &base->analog_ctl_3);
+ writel(0x66, &base->pll_filter_ctl_1);
+ writel(0x0, &base->tx_amp_tuning_ctl);
+
+ /* Set interrupt pin assertion polarity as high */
+ writel(INT_POL0 | INT_POL1, &base->int_ctl);
+
+ /* Clear pending regisers */
+ writel(0xff, &base->common_int_sta_1);
+ writel(0x4f, &base->common_int_sta_2);
+ writel(0xe0, &base->common_int_sta_3);
+ writel(0xe7, &base->common_int_sta_4);
+ writel(0x63, &base->dp_int_sta);
+
+ /* 0:mask,1: unmask */
+ writel(0x00, &base->common_int_mask_1);
+ writel(0x00, &base->common_int_mask_2);
+ writel(0x00, &base->common_int_mask_3);
+ writel(0x00, &base->common_int_mask_4);
+ writel(0x00, &base->int_sta_mask);
+}
+
+unsigned int s5p_dp_get_pll_lock_status(struct s5p_dp_device *dp)
+{
+ u32 reg;
+
+ reg = readl(&dp->base->dp_debug_ctl);
+ if (reg & PLL_LOCK)
+ return PLL_LOCKED;
+ else
+ return PLL_UNLOCKED;
+}
+
+int s5p_dp_init_analog_func(struct s5p_dp_device *dp)
+{
+ u32 reg;
+ u32 start;
+ struct exynos5_dp *base = dp->base;
+
+ writel(0x00, &base->dp_phy_pd);
+
+ reg = PLL_LOCK_CHG;
+ writel(reg, &base->common_int_sta_1);
+
+ clrbits_le32(&base->dp_debug_ctl, (F_PLL_LOCK | PLL_LOCK_CTRL));
+
+ /* Power up PLL */
+ if (s5p_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
+
+ clrbits_le32(&base->dp_pll_ctl, DP_PLL_PD);
+
+ start = get_timer(0);
+ while (s5p_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
+ if (get_timer(start) > PLL_LOCK_TIMEOUT) {
+ debug("%s: PLL is not locked yet\n", __func__);
+ return -1;
+ }
+ }
+ }
+
+ /* Enable Serdes FIFO function and Link symbol clock domain module */
+ clrbits_le32(&base->func_en_2, (SERDES_FIFO_FUNC_EN_N |
+ LS_CLK_DOMAIN_FUNC_EN_N | AUX_FUNC_EN_N));
+ return 0;
+}
+
+void s5p_dp_init_aux(struct s5p_dp_device *dp)
+{
+ u32 reg;
+ struct exynos5_dp *base = dp->base;
+
+ /* Clear inerrupts related to AUX channel */
+ reg = RPLY_RECEIV | AUX_ERR;
+ writel(reg, &base->dp_int_sta);
+
+ /* Disable AUX channel module */
+ setbits_le32(&base->func_en_2, AUX_FUNC_EN_N);
+
+ /* Disable AUX transaction H/W retry */
+ reg = (3 & AUX_BIT_PERIOD_MASK) << AUX_BIT_PERIOD_SHIFT;
+ reg |= (0 & AUX_HW_RETRY_COUNT_MASK) << AUX_HW_RETRY_COUNT_SHIFT;
+ reg |= (AUX_HW_RETRY_INTERVAL_600_US << AUX_HW_RETRY_INTERVAL_SHIFT);
+ writel(reg, &base->aux_hw_retry_ctl) ;
+
+ /* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */
+ reg = DEFER_CTRL_EN;
+ reg |= (1 & DEFER_COUNT_MASK) << DEFER_COUNT_SHIFT;
+ writel(reg, &base->aux_ch_defer_dtl);
+
+ /* Enable AUX channel module */
+ clrbits_le32(&base->func_en_2, AUX_FUNC_EN_N);
+}
+
+int s5p_dp_start_aux_transaction(struct s5p_dp_device *dp)
+{
+ int reg;
+ struct exynos5_dp *base = dp->base;
+
+ /* Enable AUX CH operation */
+ setbits_le32(&base->aux_ch_ctl_2, AUX_EN);
+
+ /* Is AUX CH command reply received? */
+ reg = readl(&base->dp_int_sta);
+ while (!(reg & RPLY_RECEIV))
+ reg = readl(&base->dp_int_sta);
+
+ /* Clear interrupt source for AUX CH command reply */
+ writel(RPLY_RECEIV, &base->dp_int_sta);
+
+ /* Clear interrupt source for AUX CH access error */
+ reg = readl(&base->dp_int_sta);
+ if (reg & AUX_ERR) {
+ writel(AUX_ERR, &base->dp_int_sta);
+ return -1;
+ }
+
+ /* Check AUX CH error access status */
+ reg = readl(&base->dp_int_sta);
+ if ((reg & AUX_STATUS_MASK) != 0) {
+ debug("AUX CH error happens: %d\n\n",
+ reg & AUX_STATUS_MASK);
+ return -1;
+ }
+
+ return 0;
+}
+
+int s5p_dp_write_byte_to_dpcd(struct s5p_dp_device *dp,
+ unsigned int reg_addr,
+ unsigned char data)
+{
+ u32 reg;
+ int i;
+ int retval;
+ struct exynos5_dp *base = dp->base;
+
+ for (i = 0; i < MAX_AUX_RETRY_COUNT; i++) {
+ /* Clear AUX CH data buffer */
+ writel(BUF_CLR, &base->buf_data_ctl);
+
+ /* Select DPCD device address */
+ reg = reg_addr >> AUX_ADDR_7_0_SHIFT;
+ reg &= AUX_ADDR_7_0_MASK;
+ writel(reg, &base->aux_addr_7_0);
+ reg = reg_addr >> AUX_ADDR_15_8_SHIFT;
+ reg &= AUX_ADDR_15_8_MASK;
+ writel(reg, &base->aux_addr_15_8);
+ reg = reg_addr >> AUX_ADDR_19_16_SHIFT;
+ reg &= AUX_ADDR_19_16_MASK;
+ writel(reg, &base->aux_addr_19_16);
+
+ /* Write data buffer */
+ reg = (unsigned int)data;
+ writel(reg, &base->buf_data_0);
+
+ /*
+ * Set DisplayPort transaction and write 1 byte
+ * If bit 3 is 1, DisplayPort transaction.
+ * If Bit 3 is 0, I2C transaction.
+ */
+ reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE;
+ writel(reg, &base->aux_ch_ctl_1);
+
+ /* Start AUX transaction */
+ retval = s5p_dp_start_aux_transaction(dp);
+ if (retval == 0)
+ break;
+ else
+ debug("Aux Transaction fail!\n");
+ }
+
+ return retval;
+}
+
+int s5p_dp_read_byte_from_dpcd(struct s5p_dp_device *dp,
+ unsigned int reg_addr,
+ unsigned char *data)
+{
+ u32 reg;
+ int i;
+ int retval;
+ struct exynos5_dp *base = dp->base;
+
+ for (i = 0; i < MAX_AUX_RETRY_COUNT; i++) {
+ /* Clear AUX CH data buffer */
+ writel(BUF_CLR, &base->buf_data_ctl);
+
+ /* Select DPCD device address */
+ reg = reg_addr >> AUX_ADDR_7_0_SHIFT;
+ reg &= AUX_ADDR_7_0_MASK;
+ writel(reg, &base->aux_addr_7_0);
+ reg = reg_addr >> AUX_ADDR_15_8_SHIFT;
+ reg &= AUX_ADDR_15_8_MASK;
+ writel(reg, &base->aux_addr_15_8);
+ reg = reg_addr >> AUX_ADDR_19_16_SHIFT;
+ reg &= AUX_ADDR_19_16_MASK;
+ writel(reg, &base->aux_addr_19_16);
+
+ /*
+ * Set DisplayPort transaction and read 1 byte
+ * If bit 3 is 1, DisplayPort transaction.
+ * If Bit 3 is 0, I2C transaction.
+ */
+ reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ;
+ writel(reg, &base->aux_ch_ctl_1);
+
+ /* Start AUX transaction */
+ retval = s5p_dp_start_aux_transaction(dp);
+ if (retval == 0)
+ break;
+ else
+ debug("Aux Transaction fail!\n");
+ }
+
+ /* Read data buffer */
+ if (!retval) {
+ reg = readl(&base->buf_data_0);
+ *data = (unsigned char)(reg & 0xff);
+ }
+
+ return retval;
+}
+
+void s5p_dp_init_video(struct s5p_dp_device *dp)
+{
+ u32 reg;
+ struct exynos5_dp *base = dp->base;
+
+ reg = VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG;
+ writel(reg, &base->common_int_sta_1);
+
+ reg = 0x0;
+ writel(reg, &base->sys_ctl_1);
+
+ reg = (4 & CHA_CRI_MASK) << CHA_CRI_SHIFT;
+ reg |= CHA_CTRL;
+ writel(reg, &base->sys_ctl_2);
+
+ reg = 0x0;
+ writel(reg, &base->sys_ctl_3);
+}
+
+void s5p_dp_set_video_color_format(struct s5p_dp_device *dp,
+ unsigned int color_depth,
+ unsigned int color_space,
+ unsigned int dynamic_range,
+ unsigned int coeff)
+{
+ u32 reg;
+ struct exynos5_dp *base = dp->base;
+
+ /* Configure the input color depth, color space, dynamic range */
+ reg = (dynamic_range << IN_D_RANGE_SHIFT) |
+ (color_depth << IN_BPC_SHIFT) |
+ (color_space << IN_COLOR_F_SHIFT);
+ writel(reg, &base->video_ctl_2);
+
+ /* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */
+ reg = readl(&base->video_ctl_3);
+ reg &= ~IN_YC_COEFFI_MASK;
+ if (coeff)
+ reg |= IN_YC_COEFFI_ITU709;
+ else
+ reg |= IN_YC_COEFFI_ITU601;
+ writel(reg, &base->video_ctl_3);
+}
+
+int s5p_dp_is_slave_video_stream_clock_on(struct s5p_dp_device *dp)
+{
+ u32 reg;
+ struct exynos5_dp *base = dp->base;
+
+ reg = readl(&base->sys_ctl_1);
+ writel(reg, &base->sys_ctl_1);
+
+ reg = readl(&base->sys_ctl_1);
+
+ if (!(reg & DET_STA))
+ return -1;
+
+ reg = readl(&base->sys_ctl_2);
+ writel(reg, &base->sys_ctl_2);
+
+ reg = readl(&base->sys_ctl_2);
+
+ if (reg & CHA_STA) {
+ debug("Input stream clk is changing\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+void s5p_dp_set_video_cr_mn(struct s5p_dp_device *dp,
+ enum clock_recovery_m_value_type type,
+ unsigned int m_value,
+ unsigned int n_value)
+{
+ u32 reg;
+ struct exynos5_dp *base = dp->base;
+
+ if (type == REGISTER_M) {
+ setbits_le32(&base->sys_ctl_4, FIX_M_VID);
+
+ reg = m_value >> M_VID_0_VALUE_SHIFT;
+ writel(reg, &base->m_vid_0);
+
+ reg = (m_value >> M_VID_1_VALUE_SHIFT);
+ writel(reg, &base->m_vid_1);
+
+ reg = (m_value >> M_VID_2_VALUE_SHIFT);
+ writel(reg, &base->m_vid_2);
+
+ reg = n_value >> N_VID_0_VALUE_SHIFT;
+ writel(reg, &base->n_vid_0);
+
+ reg = (n_value >> N_VID_1_VALUE_SHIFT);
+ writel(reg, &base->n_vid_1);
+
+ reg = (n_value >> N_VID_2_VALUE_SHIFT);
+ writel(reg, &base->n_vid_2);
+ } else {
+ clrbits_le32(&base->sys_ctl_4, FIX_M_VID);
+
+ writel(0x00, &base->n_vid_0);
+ writel(0x80, &base->n_vid_1);
+ writel(0x00, &base->n_vid_2);
+ }
+}
+
+void s5p_dp_enable_video_master(struct s5p_dp_device *dp)
+{
+ u32 reg;
+ struct exynos5_dp *base = dp->base;
+
+ reg = readl(&base->soc_general_ctl);
+ reg &= ~VIDEO_MODE_MASK;
+ reg |= VIDEO_MODE_SLAVE_MODE;
+ writel(reg, &base->soc_general_ctl);
+}
+
+int s5p_dp_is_video_stream_on(struct s5p_dp_device *dp)
+{
+ u32 reg, i = 0;
+ u32 start;
+ struct exynos5_dp *base = dp->base;
+
+ /* Wait for 4 VSYNC_DET interrupts */
+ start = get_timer(0);
+ do {
+ reg = readl(&base->common_int_sta_1);
+ if (reg & VSYNC_DET) {
+ i++;
+ writel(reg | VSYNC_DET, &base->common_int_sta_1);
+ }
+ if (i == 4)
+ break;
+ } while (get_timer(start) <= STREAM_ON_TIMEOUT);
+
+ if (i != 4) {
+ debug("s5p_dp_is_video_stream_on timeout\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+void s5p_dp_config_video_slave_mode(struct s5p_dp_device *dp,
+ struct video_info *video_info)
+{
+ u32 reg;
+ struct exynos5_dp *base = dp->base;
+
+ reg = readl(&base->func_en_1);
+ reg &= ~(MASTER_VID_FUNC_EN_N|SLAVE_VID_FUNC_EN_N);
+ reg |= MASTER_VID_FUNC_EN_N;
+ writel(reg, &base->func_en_1);
+
+ reg = readl(&base->video_ctl_10);
+ reg &= ~INTERACE_SCAN_CFG;
+ reg |= (video_info->interlaced << 2);
+ writel(reg, &base->video_ctl_10);
+
+ reg = readl(&base->video_ctl_10);
+ reg &= ~VSYNC_POLARITY_CFG;
+ reg |= (video_info->v_sync_polarity << 1);
+ writel(reg, &base->video_ctl_10);
+
+ reg = readl(&base->video_ctl_10);
+ reg &= ~HSYNC_POLARITY_CFG;
+ reg |= (video_info->h_sync_polarity << 0);
+ writel(reg, &base->video_ctl_10);
+
+ reg = AUDIO_MODE_SPDIF_MODE | VIDEO_MODE_SLAVE_MODE;
+ writel(reg, &base->soc_general_ctl);
+}
+
+void s5p_dp_wait_hw_link_training_done(struct s5p_dp_device *dp)
+{
+ u32 reg;
+ struct exynos5_dp *base = dp->base;
+
+ reg = readl(&base->dp_hw_link_training);
+ while (reg & HW_TRAINING_EN)
+ reg = readl(&base->dp_hw_link_training);
+}
diff --git a/src/mainboard/google/snow/Kconfig b/src/mainboard/google/snow/Kconfig
index 6face944bb..85b90a5a3a 100644
--- a/src/mainboard/google/snow/Kconfig
+++ b/src/mainboard/google/snow/Kconfig
@@ -1,7 +1,7 @@
##
## This file is part of the coreboot project.
##
-## Copyright (C) 2012 The ChromiumOS Authors. All rights reserved.
+## Copyright 2013 Google Inc.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
@@ -29,6 +29,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select DRIVER_MAXIM_MAX77686
# select HAVE_ACPI_TABLES
# select MMCONF_SUPPORT
+ select EXYNOS_DISPLAYPORT
select CHROMEOS
config MAINBOARD_DIR
diff --git a/src/mainboard/google/snow/devicetree.cb b/src/mainboard/google/snow/devicetree.cb
index 4c88ea8e98..5ad786ef55 100644
--- a/src/mainboard/google/snow/devicetree.cb
+++ b/src/mainboard/google/snow/devicetree.cb
@@ -28,5 +28,19 @@ device domain 0 on
device i2c 6 on end # ?
device i2c 9 on end # ?
end
+ chip cpu/samsung/exynos5-common/displayport
+ register "xres" = "1366"
+ register "yres" = "768"
+ register "bpp" = "16"
+ # complex magic timing!
+ register "clkval_f" = "2"
+ register "upper_margin" = "14"
+ register "lower_margin" = "3"
+ register "vsync" = "5"
+ register "left_margin" = "80"
+ register "right_margin" = "48"
+ register "hsync" = "32"
+ register "lcdbase" = "0x10000000"
+ end
end
end
diff --git a/src/mainboard/google/snow/romstage.c b/src/mainboard/google/snow/romstage.c
index 25c0846a07..8de4381d03 100644
--- a/src/mainboard/google/snow/romstage.c
+++ b/src/mainboard/google/snow/romstage.c
@@ -31,7 +31,6 @@
#include <cpu/samsung/exynos5250/setup.h>
#include <cpu/samsung/exynos5250/periph.h>
#include <cpu/samsung/exynos5250/clock_init.h>
-
#include <console/console.h>
#include <arch/stages.h>
@@ -68,6 +67,11 @@ static void initialize_s5p_mshc(void) {
exynos_pinmux_config(PERIPH_ID_SDMMC2, 0);
}
+static void graphics(void)
+{
+
+ exynos_pinmux_config(PERIPH_ID_DPHPD, 0);
+}
void main(void)
{
struct mem_timings *mem;
@@ -106,6 +110,8 @@ void main(void)
initialize_s5p_mshc();
+ graphics();
+
entry = cbfs_load_stage(CBFS_DEFAULT_MEDIA, "fallback/coreboot_ram");
printk(BIOS_INFO, "entry is 0x%p, leaving romstage.\n", entry);