diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/arch/ppc/include/div64.h | 1 | ||||
| -rw-r--r-- | src/mainboard/embeddedplanet/ep405pc/Config.lb | 4 | ||||
| -rw-r--r-- | src/mainboard/embeddedplanet/ep405pc/Options.lb | 106 | ||||
| -rw-r--r-- | src/mainboard/motorola/sandpoint/Config.lb | 20 | ||||
| -rw-r--r-- | src/mainboard/motorola/sandpoint/Options.lb | 95 | ||||
| -rw-r--r-- | src/mainboard/totalimpact/briq/Config.lb | 8 | ||||
| -rw-r--r-- | src/mainboard/totalimpact/briq/Options.lb | 80 | ||||
| -rw-r--r-- | src/pmc/altimus/mpc7410/Config.lb | 4 |
8 files changed, 300 insertions, 18 deletions
diff --git a/src/arch/ppc/include/div64.h b/src/arch/ppc/include/div64.h new file mode 100644 index 0000000000..a841abf954 --- /dev/null +++ b/src/arch/ppc/include/div64.h @@ -0,0 +1 @@ +#include <arch-generic/div64.h> diff --git a/src/mainboard/embeddedplanet/ep405pc/Config.lb b/src/mainboard/embeddedplanet/ep405pc/Config.lb index 4b76162e17..9f071bf621 100644 --- a/src/mainboard/embeddedplanet/ep405pc/Config.lb +++ b/src/mainboard/embeddedplanet/ep405pc/Config.lb @@ -9,12 +9,12 @@ initobject init.c driver pci_bridge.c arch ppc end -cpu ppc/ppc4xx end +chip cpu/ppc/ppc4xx device pnp 0.0 on end end ## ## Include the secondary Configuration files ## -southbridge winbond/w83c553 end +chip southbridge/winbond/w83c553 device pnp 0.0 on end end ## ## Build the objects we have code for in this directory. diff --git a/src/mainboard/embeddedplanet/ep405pc/Options.lb b/src/mainboard/embeddedplanet/ep405pc/Options.lb index 9acea4955f..d37db77dc2 100644 --- a/src/mainboard/embeddedplanet/ep405pc/Options.lb +++ b/src/mainboard/embeddedplanet/ep405pc/Options.lb @@ -8,6 +8,41 @@ uses ISA_IO_BASE uses ISA_MEM_BASE uses TTYS0_BASE uses _IO_BASE + +uses CPU_OPT +uses CROSS_COMPILE +uses HAVE_OPTION_TABLE +uses CONFIG_COMPRESS +uses CONFIG_CHIP_CONFIGURE +uses DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_USE_INIT +uses CONFIG_CONSOLE_SERIAL8250 +uses TTYS0_BAUD TTYS0_DIV +uses NO_POST +uses CONFIG_IDE +uses CONFIG_FS_STREAM +uses CONFIG_FS_EXT2 +uses CONFIG_FS_ISO9660 +uses CONFIG_FS_FAT +uses AUTOBOOT_CMDLINE +uses CONFIG_SYS_CLK_FREQ +uses IDE_BOOT_DRIVE +#uses IDE_SWAB +uses IDE_OFFSET +uses ROM_SIZE +uses _RESET +uses _EXCEPTION_VECTORS +uses _ROMBASE +uses _ROMSTART +uses _RAMBASE +#uses _RAMSTART +uses EMBEDDED_RAM_SIZE +uses STACK_SIZE HEAP_SIZE + +uses MAINBOARD +uses MAINBOARD_VENDOR +uses MAINBOARD_PART_NUMBER +uses LINUXBIOS_EXTRA_VERSION uses CROSS_COMPILE uses CC uses HOSTCC @@ -33,3 +68,74 @@ default _IO_BASE=ISA_IO_BASE ## default TTYS0_BASE=0xef600300-ISA_IO_BASE +## Enable PPC405 instructions +default CPU_OPT="-Wa,-m405" +default CPU_OPT="" + +## Use stage 1 initialization code +default CONFIG_USE_INIT=1 + +## Use chip configuration +default CONFIG_CHIP_CONFIGURE=1 + +## We don't use compressed image +default CONFIG_COMPRESS=0 + +## Turn off POST codes +default NO_POST=1 + +## Enable serial console +default DEFAULT_CONSOLE_LOGLEVEL=8 +default CONFIG_CONSOLE_SERIAL8250=1 +# Divisor of 69 == 9600 baud due to weird clocking +default TTYS0_DIV=69 +default TTYS0_BAUD=9600 + +## Boot linux from IDE +default CONFIG_IDE=1 +default CONFIG_FS_STREAM=1 +default CONFIG_FS_EXT2=1 +default CONFIG_FS_ISO9660=1 +default CONFIG_FS_FAT=1 +default AUTOBOOT_CMDLINE="hda1:/vmlinuz" + +default ROM_SIZE=1048576 + +## Board has fixed size RAM +default EMBEDDED_RAM_SIZE=64*1024*1024 + +## LinuxBIOS C code runs at this location in RAM +default _RAMBASE=0x00100000 + +## +## Use a 64K stack +## +default STACK_SIZE=0x10000 + +## +## Use a 64K heap +## +default HEAP_SIZE=0x10000 + +## +## System clock +## +default CONFIG_SYS_CLK_FREQ=33 + +## +default _ROMBASE=0xfff00000 + +## Reset vector address +default _RESET=0xfffffffc + +## Exception vectors +default _EXCEPTION_VECTORS=_ROMBASE+0x100 + +## linuxBIOS ROM start address +default _ROMSTART=0xfff03000 + +## linuxBIOS C code runs at this location in RAM +default _RAMBASE=0x00100000 + +### End Options.lb +end diff --git a/src/mainboard/motorola/sandpoint/Config.lb b/src/mainboard/motorola/sandpoint/Config.lb index f33ce4bede..94e0ba79f1 100644 --- a/src/mainboard/motorola/sandpoint/Config.lb +++ b/src/mainboard/motorola/sandpoint/Config.lb @@ -20,30 +20,30 @@ object clock.o arch ppc end if CONFIG_SANDPOINT_ALTIMUS - pmc altimus/mpc7410 end -# pmc altimus/mpc7400 end -# pmc altimus/mpc75x end + chip pmc/altimus/mpc7410 device pnp 0.0 on end end +# chip pmc/altimus/mpc7400 device pnp 0.0 on end end +# chip pmc/altimus/mpc75x device pnp 0.0 on end end end if CONFIG_SANDPOINT_TALUS - pmc talus/mpc74x end - pmc talus/mpc603 end + chip pmc/talus/mpc74x device pnp 0.0 on end end + chip pmc/talus/mpc603 device pnp 0.0 on end end end if CONFIG_SANDPOINT_UNITY - pmc unity/mpc824x end + chip pmc/unity/mpc824x device pnp 0.0 on end end end if CONFIG_SANDPOINT_VALIS - pmc valis/mpc745x end + chip pmc/valis/mpc745x device pnp 0.0 on end end end if CONFIG_SANDPOINT_GYRUS - pmc gyrus/mpc744x end + chip pmc/gyrus/mpc744x device pnp 0.0 on end end end ## ## Include the secondary Configuration files ## -southbridge winbond/w83c553 end +chip southbridge/winbond/w83c553 device pnp 0.0 on end end -superio NSC/pc97307 end +chip superio/NSC/pc97307 device pnp 0.0 on end end ## ## Build the objects we have code for in this directory. diff --git a/src/mainboard/motorola/sandpoint/Options.lb b/src/mainboard/motorola/sandpoint/Options.lb index 5ca5007883..f17fc0ef82 100644 --- a/src/mainboard/motorola/sandpoint/Options.lb +++ b/src/mainboard/motorola/sandpoint/Options.lb @@ -10,6 +10,39 @@ uses PCIC0_CFGDATA uses PNP_CFGADDR uses PNP_CFGDATA uses _IO_BASE + +uses CROSS_COMPILE +uses HAVE_OPTION_TABLE +uses CONFIG_SANDPOINT_ALTIMUS +uses CONFIG_COMPRESS +uses DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_USE_INIT +uses CONFIG_CHIP_CONFIGURE +uses NO_POST +uses CONFIG_CONSOLE_SERIAL8250 +uses TTYS0_BASE +uses CONFIG_IDE +uses CONFIG_FS_STREAM +uses CONFIG_FS_EXT2 +uses CONFIG_FS_ISO9660 +uses CONFIG_FS_FAT +uses AUTOBOOT_CMDLINE +uses PAYLOAD_SIZE +uses ROM_SIZE +uses ROM_IMAGE_SIZE +uses _RESET +uses _EXCEPTION_VECTORS +uses _ROMBASE +uses _ROMSTART +uses _RAMBASE +uses _RAMSTART +uses STACK_SIZE +uses HEAP_SIZE + +uses MAINBOARD +uses MAINBOARD_VENDOR +uses MAINBOARD_PART_NUMBER +uses LINUXBIOS_EXTRA_VERSION uses CROSS_COMPILE uses CC uses HOSTCC @@ -25,3 +58,65 @@ default PCIC0_CFGDATA=0xfee00000 default PNP_CFGADDR=0x15c default PNP_CFGDATA=0x15d default _IO_BASE=ISA_IO_BASE + + +## use a cross compiler +#default CROSS_COMPILE="powerpc-eabi-" +#default CROSS_COMPILE="ppc_74xx-" + +## Use stage 1 initialization code +default CONFIG_USE_INIT=1 + +## Use static configuration +default CONFIG_CHIP_CONFIGURE=1 + +## We don't use compressed image +default CONFIG_COMPRESS=0 + +## Turn off POST codes +default NO_POST=1 + +## Enable serial console +default DEFAULT_CONSOLE_LOGLEVEL=8 +default CONFIG_CONSOLE_SERIAL8250=1 +default TTYS0_BASE=0x3f8 + +## Load payload using filo +default CONFIG_IDE=1 +default CONFIG_FS_STREAM=1 +default CONFIG_FS_EXT2=1 +default CONFIG_FS_ISO9660=1 +default CONFIG_FS_FAT=1 +default AUTOBOOT_CMDLINE="hdc1:/vmlinuz" + +# LinuxBIOS must fit into 128KB +default ROM_IMAGE_SIZE=131072 +default ROM_SIZE={ROM_IMAGE_SIZE+PAYLOAD_SIZE} +default PAYLOAD_SIZE=262144 + +# Set stack and heap sizes (stage 2) +default STACK_SIZE=0x10000 +default HEAP_SIZE=0x10000 + +# Sandpoint Demo Board +## Base of ROM +default _ROMBASE=0xfff00000 + +## Sandpoint reset vector +default _RESET=_ROMBASE+0x100 + +## Exception vectors (other than reset vector) +default _EXCEPTION_VECTORS=_RESET+0x100 + +## Start of linuxBIOS in the boot rom +## = _RESET + exeception vector table size +default _ROMSTART=_RESET+0x3100 + +## LinuxBIOS C code runs at this location in RAM +default _RAMBASE=0x00100000 +default _RAMSTART=0x00100000 + +default CONFIG_SANDPOINT_ALTIMUS=1 + +### End Options.lb +end diff --git a/src/mainboard/totalimpact/briq/Config.lb b/src/mainboard/totalimpact/briq/Config.lb index 943018d025..775aad36f8 100644 --- a/src/mainboard/totalimpact/briq/Config.lb +++ b/src/mainboard/totalimpact/briq/Config.lb @@ -16,17 +16,17 @@ object clock.o arch ppc end if CONFIG_BRIQ_750FX - cpu ppc/ppc7xx end + chip cpu/ppc/ppc7xx device pnp 0.0 on end end end if CONFIG_BRIQ_7400 - cpu ppc/mpc74xx end + chip cpu/ppc/mpc74xx device pnp 0.0 on end end end ## ## Include the secondary Configuration files ## -northbridge ibm/cpc710 end -southbridge winbond/w83c553 end +chip northbridge/ibm/cpc710 device pnp 0.0 on end end +chip southbridge/winbond/w83c553 device pnp 0.0 on end end ## ## Build the objects we have code for in this directory. diff --git a/src/mainboard/totalimpact/briq/Options.lb b/src/mainboard/totalimpact/briq/Options.lb index 37bfa24c72..557290f8ff 100644 --- a/src/mainboard/totalimpact/briq/Options.lb +++ b/src/mainboard/totalimpact/briq/Options.lb @@ -11,6 +11,32 @@ uses ISA_MEM_BASE uses PCIC0_CFGADDR uses PCIC0_CFGDATA uses _IO_BASE +uses CROSS_COMPILE +uses HAVE_OPTION_TABLE +uses CONFIG_COMPRESS +uses DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_USE_INIT +uses NO_POST +uses CONFIG_CONSOLE_SERIAL8250 +uses CONFIG_IDE_STREAM +uses IDE_BOOT_DRIVE +uses IDE_SWAB IDE_OFFSET +uses ROM_SIZE +uses _RESET +uses _EXCEPTION_VECTORS +uses _ROMBASE +uses _ROMSTART +uses _RAMBASE +uses _RAMSTART +uses STACK_SIZE +uses HEAP_SIZE +uses CONFIG_BRIQ_750FX +uses CONFIG_BRIQ_7400 + +uses MAINBOARD +uses MAINBOARD_VENDOR +uses MAINBOARD_PART_NUMBER +uses LINUXBIOS_EXTRA_VERSION uses CROSS_COMPILE uses CC uses HOSTCC @@ -33,3 +59,57 @@ default TTYS0_DIV=4 ## Set UART base address ## default TTYS0_BASE=0x3f8 + +## use a cross compiler +#default CROSS_COMPILE="powerpc-eabi-" +#default CROSS_COMPILE="ppc_74xx-" + +## Use stage 1 initialization code +default CONFIG_USE_INIT=1 + +## We don't use compressed image +default CONFIG_COMPRESS=0 + +## Turn off POST codes +default NO_POST=1 + +## Enable serial console +default DEFAULT_CONSOLE_LOGLEVEL=8 +default CONFIG_CONSOLE_SERIAL8250=1 + +## Boot linux from IDE +default CONFIG_IDE_STREAM=1 +default IDE_BOOT_DRIVE=0 +default IDE_SWAB=1 +default IDE_OFFSET=0 + +# ROM is 1Mb +default ROM_SIZE=1048576 + +# Set stack and heap sizes (stage 2) +default STACK_SIZE=0x10000 +default HEAP_SIZE=0x10000 + +# Sandpoint Demo Board +## Base of ROM +default _ROMBASE=0xfff00000 + +## Sandpoint reset vector +default _RESET=_ROMBASE+0x100 + +## Exception vectors (other than reset vector) +default _EXCEPTION_VECTORS=_RESET+0x100 + +## Start of linuxBIOS in the boot rom +## = _RESET + exeception vector table size +default _ROMSTART=_RESET+0x3100 + +## LinuxBIOS C code runs at this location in RAM +default _RAMBASE=0x00100000 +default _RAMSTART=0x00100000 + +default CONFIG_BRIQ_750FX=1 +#default CONFIG_BRIQ_7400=1 + +### End Options.lb +end diff --git a/src/pmc/altimus/mpc7410/Config.lb b/src/pmc/altimus/mpc7410/Config.lb index ecfd027f01..29dc45ed08 100644 --- a/src/pmc/altimus/mpc7410/Config.lb +++ b/src/pmc/altimus/mpc7410/Config.lb @@ -1,12 +1,12 @@ ## ## CPU initialization ## -cpu ppc/mpc74xx end +chip cpu/ppc/mpc74xx device pnp 0.0 on end end ## ## Include the secondary Configuration files ## -northbridge motorola/mpc107 end +chip northbridge/motorola/mpc107 device pnp 0.0 on end end ## ## Build the objects we have code for in this directory. |