summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/mainboard/asus/mew-am/auto.c14
-rw-r--r--src/mainboard/asus/mew-vm/auto.c19
-rw-r--r--src/mainboard/msi/ms6178/auto.c15
-rw-r--r--src/northbridge/intel/i82810/debug.c6
-rw-r--r--src/northbridge/intel/i82810/raminit.c71
-rw-r--r--src/northbridge/intel/i82810/raminit.h6
6 files changed, 49 insertions, 82 deletions
diff --git a/src/mainboard/asus/mew-am/auto.c b/src/mainboard/asus/mew-am/auto.c
index 22cb164d37..ea09d6c371 100644
--- a/src/mainboard/asus/mew-am/auto.c
+++ b/src/mainboard/asus/mew-am/auto.c
@@ -48,17 +48,9 @@ static inline int spd_read_byte(unsigned int device, unsigned int address)
#include "northbridge/intel/i82810/raminit.c"
/* #include "northbridge/intel/i82810/debug.c" */
-#include "sdram/generic_sdram.c"
static void main(unsigned long bist)
{
- static const struct mem_controller memctrl[] = {
- {
- .d0 = PCI_DEV(0, 0, 0),
- .channel0 = {0x50, 0x51},
- }
- };
-
if (bist == 0)
early_mtrr_init();
@@ -67,7 +59,9 @@ static void main(unsigned long bist)
console_init();
report_bist_failure(bist);
enable_smbus();
- /* dump_spd_registers(&memctrl[0]); */
- sdram_initialize(ARRAY_SIZE(memctrl), memctrl);
+ /* dump_spd_registers(); */
+ sdram_set_registers();
+ sdram_set_spd_registers();
+ sdram_enable();
/* ram_check(0, 640 * 1024); */
}
diff --git a/src/mainboard/asus/mew-vm/auto.c b/src/mainboard/asus/mew-vm/auto.c
index 78f9f48254..721f6116b1 100644
--- a/src/mainboard/asus/mew-vm/auto.c
+++ b/src/mainboard/asus/mew-vm/auto.c
@@ -52,17 +52,9 @@ void udelay(int usecs)
#include "northbridge/intel/i82810/raminit.c"
#include "northbridge/intel/i82810/debug.c"
-#include "sdram/generic_sdram.c"
static void main(unsigned long bist)
{
- static const struct mem_controller memctrl[] = {
- {
- .d0 = PCI_DEV(0, 0, 0),
- .channel0 = {0x50, 0x51},
- }
- };
-
if (bist == 0)
early_mtrr_init();
@@ -75,14 +67,11 @@ static void main(unsigned long bist)
/* Halt if there was a built in self test failure. */
report_bist_failure(bist);
- /* dump_spd_registers(&memctrl[0]); */
-
- /* sdram_initialize() runs out of registers. */
- /* sdram_initialize(ARRAY_SIZE(memctrl), memctrl); */
+ /* dump_spd_registers(); */
- sdram_set_registers(memctrl);
- sdram_set_spd_registers(memctrl);
- sdram_enable(0, memctrl);
+ sdram_set_registers();
+ sdram_set_spd_registers();
+ sdram_enable();
/* Check RAM. */
/* ram_check(0, 640 * 1024); */
diff --git a/src/mainboard/msi/ms6178/auto.c b/src/mainboard/msi/ms6178/auto.c
index d92aa6b53b..a59074d17a 100644
--- a/src/mainboard/msi/ms6178/auto.c
+++ b/src/mainboard/msi/ms6178/auto.c
@@ -37,19 +37,11 @@
#include "southbridge/intel/i82801xx/i82801xx_early_smbus.c"
#include "pc80/udelay_io.c"
#include "northbridge/intel/i82810/raminit.c"
-#include "sdram/generic_sdram.c"
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
static void main(unsigned long bist)
{
- static const struct mem_controller memctrl[] = {
- {
- .d0 = PCI_DEV(0, 0, 0),
- .channel0 = {0x50, 0x51},
- }
- };
-
if (bist == 0)
early_mtrr_init();
@@ -66,7 +58,10 @@ static void main(unsigned long bist)
enable_smbus();
report_bist_failure(bist);
- /* dump_spd_registers(&memctrl[0]); */
- sdram_initialize(ARRAY_SIZE(memctrl), memctrl);
+
+ /* dump_spd_registers(); */
+ sdram_set_registers();
+ sdram_set_spd_registers();
+ sdram_enable();
/* ram_check(0, 640 * 1024); */
}
diff --git a/src/northbridge/intel/i82810/debug.c b/src/northbridge/intel/i82810/debug.c
index bcb60e2b0a..5733700af3 100644
--- a/src/northbridge/intel/i82810/debug.c
+++ b/src/northbridge/intel/i82810/debug.c
@@ -1,11 +1,11 @@
-static void dump_spd_registers(const struct mem_controller *ctrl)
+static void dump_spd_registers(void)
{
int i;
print_debug("\r\n");
- for(i = 0; i < 4; i++) {
+ for(i = 0; i < DIMM_SOCKETS; i++) {
unsigned device;
- device = ctrl->channel0[i];
+ device = DIMM_SPD_BASE + i;
if (device) {
int j;
print_debug("dimm: ");
diff --git a/src/northbridge/intel/i82810/raminit.c b/src/northbridge/intel/i82810/raminit.c
index 23d45c924f..ecfa7c311f 100644
--- a/src/northbridge/intel/i82810/raminit.c
+++ b/src/northbridge/intel/i82810/raminit.c
@@ -62,22 +62,21 @@ SDRAM configuration functions.
/**
* Send the specified RAM command to all DIMMs.
*
- * @param Memory controller
* @param TODO
* @param TODO
*/
-static void do_ram_command(const struct mem_controller *ctrl, uint32_t command,
- uint32_t addr_offset, uint32_t row_offset)
+static void do_ram_command(uint32_t command, uint32_t addr_offset,
+ uint32_t row_offset)
{
uint8_t reg;
/* TODO: Support for multiple DIMMs. */
/* Configure the RAM command. */
- reg = pci_read_config8(ctrl->d0, DRAMT);
+ reg = pci_read_config8(PCI_DEV(0, 0, 0), DRAMT);
reg &= 0x1f; /* Clear bits 7-5. */
reg |= command << 5;
- pci_write_config8(ctrl->d0, DRAMT, reg);
+ pci_write_config8(PCI_DEV(0, 0, 0), DRAMT, reg);
/* RAM_COMMAND_NORMAL affects only the memory controller and
doesn't need to be "sent" to the DIMMs. */
@@ -101,8 +100,7 @@ DIMM-independant configuration functions.
/*
* Set DRP - DRAM Row Population Register (Device 0).
*/
-static void spd_set_dram_size(const struct mem_controller *ctrl,
- uint32_t row_offset)
+static void spd_set_dram_size(uint32_t row_offset)
{
/* The variables drp and dimm_size have to be ints since all the
* SMBus-related functions return ints, and its just easier this way.
@@ -113,12 +111,12 @@ static void spd_set_dram_size(const struct mem_controller *ctrl,
for (i = 0; i < DIMM_SOCKETS; i++) {
/* First check if a DIMM is actually present. */
- if (smbus_read_byte(ctrl->channel0[i], 2) == 4) {
+ if (smbus_read_byte(DIMM_SPD_BASE + i, 2) == 4) {
print_debug("Found DIMM in slot ");
print_debug_hex8(i);
print_debug("\r\n");
- dimm_size = smbus_read_byte(ctrl->channel0[i], 31);
+ dimm_size = smbus_read_byte(DIMM_SPD_BASE + i, 31);
/* WISHLIST: would be nice to display it as decimal? */
print_debug("DIMM is 0x");
@@ -181,7 +179,7 @@ static void spd_set_dram_size(const struct mem_controller *ctrl,
/* If the DIMM is dual-sided, the DRP value is +2 */
/* TODO: Figure out asymetrical configurations. */
- if ((smbus_read_byte(ctrl->channel0[i], 127) | 0xf) ==
+ if ((smbus_read_byte(DIMM_SPD_BASE + i, 127) | 0xf) ==
0xff) {
print_debug("DIMM is dual-sided\r\n");
dimm_size += 2;
@@ -203,13 +201,13 @@ static void spd_set_dram_size(const struct mem_controller *ctrl,
print_debug_hex8(drp);
print_debug("\r\n");
- pci_write_config8(ctrl->d0, DRP, drp);
+ pci_write_config8(PCI_DEV(0, 0, 0), DRP, drp);
}
-static void set_dram_timing(const struct mem_controller *ctrl)
+static void set_dram_timing(void)
{
/* TODO, for now using default, hopefully safe values. */
- // pci_write_config8(ctrl->d0, DRAMT, 0x00);
+ // pci_write_config8(PCI_DEV(0, 0, 0), DRAMT, 0x00);
}
/*
@@ -239,9 +237,9 @@ static void set_dram_timing(const struct mem_controller *ctrl)
* 0x4445 384MB 0xfd 128MB single-sided 256MB dual-sided
* 0x0001 512MB 0xff 256MB dual-sided 256MB dual-sided
*/
-static void set_dram_buffer_strength(const struct mem_controller *ctrl)
+static void set_dram_buffer_strength(void)
{
- pci_write_config16(ctrl->d0, BUFF_SC, 0x77da);
+ pci_write_config16(PCI_DEV(0, 0, 0), BUFF_SC, 0x77da);
}
/*-----------------------------------------------------------------------------
@@ -250,15 +248,13 @@ Public interface.
/**
* TODO.
- *
- * @param Memory controller
*/
-static void sdram_set_registers(const struct mem_controller *ctrl)
+static void sdram_set_registers(void)
{
unsigned long val;
/* TODO */
- pci_write_config8(ctrl->d0, GMCHCFG, 0x60);
+ pci_write_config8(PCI_DEV(0, 0, 0), GMCHCFG, 0x60);
/* PAMR: Programmable Attributes Register
* Every pair of bits controls an address range:
@@ -275,49 +271,44 @@ static void sdram_set_registers(const struct mem_controller *ctrl)
*/
/* Ideally, this should be R/W for as many ranges as possible. */
- pci_write_config8(ctrl->d0, PAM, 0xff);
+ pci_write_config8(PCI_DEV(0, 0, 0), PAM, 0xff);
/* Enabling the VGA Framebuffer currently screws up the rest of the boot.
* Disable for now */
/* Enable 1MB framebuffer. */
- //pci_write_config8(ctrl->d0, SMRAM, 0xC0);
+ //pci_write_config8(PCI_DEV(0, 0, 0), SMRAM, 0xC0);
- //val = pci_read_config16(ctrl->d0, MISSC);
+ //val = pci_read_config16(PCI_DEV(0, 0, 0), MISSC);
/* Preserve reserved bits. */
//val &= 0xff06;
/* Set graphics cache window to 32MB, no power throttling. */
//val |= 0x0001;
- //pci_write_config16(ctrl->d0, MISSC, val);
+ //pci_write_config16(PCI_DEV(0, 0, 0), MISSC, val);
- //val = pci_read_config8(ctrl->d0, MISSC2);
+ //val = pci_read_config8(PCI_DEV(0, 0, 0), MISSC2);
/* Enable graphics palettes and clock gating (not optional!) */
//val |= 0x06;
- //pci_write_config8(ctrl->d0, MISSC2, val);
+ //pci_write_config8(PCI_DEV(0, 0, 0), MISSC2, val);
}
/**
* TODO.
- *
- * @param Memory controller
*/
-static void sdram_set_spd_registers(const struct mem_controller *ctrl)
+static void sdram_set_spd_registers(void)
{
/* spd_set_dram_size() moved into sdram_enable() to prevent having
* to pass a variable between here and there.
*/
- set_dram_buffer_strength(ctrl);
+ set_dram_buffer_strength();
- set_dram_timing(ctrl);
+ set_dram_timing();
}
/**
* Enable SDRAM.
- *
- * @param Number of controllers
- * @param Memory controller
*/
-static void sdram_enable(int controllers, const struct mem_controller *ctrl)
+static void sdram_enable(void)
{
int i;
@@ -327,21 +318,21 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
*/
uint32_t row_offset;
- spd_set_dram_size(ctrl, row_offset);
+ spd_set_dram_size(row_offset);
/* 1. Apply NOP. */
PRINT_DEBUG("RAM Enable 1: Apply NOP\r\n");
- do_ram_command(ctrl, RAM_COMMAND_NOP, 0, row_offset);
+ do_ram_command(RAM_COMMAND_NOP, 0, row_offset);
udelay(200);
/* 2. Precharge all. Wait tRP. */
PRINT_DEBUG("RAM Enable 2: Precharge all\r\n");
- do_ram_command(ctrl, RAM_COMMAND_PRECHARGE, 0, row_offset);
+ do_ram_command(RAM_COMMAND_PRECHARGE, 0, row_offset);
udelay(1);
/* 3. Perform 8 refresh cycles. Wait tRC each time. */
PRINT_DEBUG("RAM Enable 3: CBR\r\n");
- do_ram_command(ctrl, RAM_COMMAND_CBR, 0, row_offset);
+ do_ram_command(RAM_COMMAND_CBR, 0, row_offset);
for (i = 0; i < 8; i++) {
read32(0);
read32(row_offset);
@@ -350,12 +341,12 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
/* 4. Mode register set. Wait two memory cycles. */
PRINT_DEBUG("RAM Enable 4: Mode register set\r\n");
- do_ram_command(ctrl, RAM_COMMAND_MRS, 0x1d0, row_offset);
+ do_ram_command(RAM_COMMAND_MRS, 0x1d0, row_offset);
udelay(2);
/* 5. Normal operation (enables refresh) */
PRINT_DEBUG("RAM Enable 5: Normal operation\r\n");
- do_ram_command(ctrl, RAM_COMMAND_NORMAL, 0, row_offset);
+ do_ram_command(RAM_COMMAND_NORMAL, 0, row_offset);
udelay(1);
PRINT_DEBUG("Northbridge following SDRAM init:\r\n");
diff --git a/src/northbridge/intel/i82810/raminit.h b/src/northbridge/intel/i82810/raminit.h
index 1e79397288..5a06dd171d 100644
--- a/src/northbridge/intel/i82810/raminit.h
+++ b/src/northbridge/intel/i82810/raminit.h
@@ -24,10 +24,8 @@
/* The 82810 supports max. 2 dual-sided DIMMs. */
#define DIMM_SOCKETS 2
-struct mem_controller {
- device_t d0;
- uint16_t channel0[DIMM_SOCKETS];
-};
+/* DIMM0 is at 0x50, DIMM1 is at 0x51. */
+#define DIMM_SPD_BASE 0x50
/* The following table has been bumped over to this header to avoid clutter in
* raminit.c. It's used to translate the value read from SPD Byte 31 to a value
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 09:11:22 +0000