summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/soc/broadcom/cygnus/include/soc/ns16550.h178
-rw-r--r--src/soc/broadcom/cygnus/ns16550.c301
2 files changed, 479 insertions, 0 deletions
diff --git a/src/soc/broadcom/cygnus/include/soc/ns16550.h b/src/soc/broadcom/cygnus/include/soc/ns16550.h
new file mode 100644
index 0000000000..51cb5b4a66
--- /dev/null
+++ b/src/soc/broadcom/cygnus/include/soc/ns16550.h
@@ -0,0 +1,178 @@
+/*
+ * NS16550 Serial Port
+ * originally from linux source (arch/powerpc/boot/ns16550.h)
+ *
+ * Cleanup and unification
+ * (C) 2009 by Detlev Zundel, DENX Software Engineering GmbH
+ *
+ * modified slightly to
+ * have addresses as offsets from CONFIG_SYS_ISA_BASE
+ * added a few more definitions
+ * added prototypes for ns16550.c
+ * reduced no of com ports to 2
+ * modifications (c) Rob Taylor, Flying Pig Systems. 2000.
+ *
+ * added support for port on 64-bit bus
+ * by Richard Danter (richard.danter@windriver.com), (C) 2005 Wind River Systems
+ */
+
+/*
+ * Note that the following macro magic uses the fact that the compiler
+ * will not allocate storage for arrays of size 0
+ */
+
+#include <linux/types.h>
+
+#if !defined(CONFIG_SYS_NS16550_REG_SIZE) || (CONFIG_SYS_NS16550_REG_SIZE == 0)
+#error "Please define NS16550 registers size."
+#elif defined(CONFIG_SYS_NS16550_MEM32)
+#define UART_REG(x) u32 x
+#elif (CONFIG_SYS_NS16550_REG_SIZE > 0)
+#define UART_REG(x) \
+ unsigned char prepad_##x[CONFIG_SYS_NS16550_REG_SIZE - 1]; \
+ unsigned char x;
+#elif (CONFIG_SYS_NS16550_REG_SIZE < 0)
+#define UART_REG(x) \
+ unsigned char x; \
+ unsigned char postpad_##x[-CONFIG_SYS_NS16550_REG_SIZE - 1];
+#endif
+
+struct NS16550 {
+ UART_REG(rbr); /* 0 */
+ UART_REG(ier); /* 1 */
+ UART_REG(fcr); /* 2 */
+ UART_REG(lcr); /* 3 */
+ UART_REG(mcr); /* 4 */
+ UART_REG(lsr); /* 5 */
+ UART_REG(msr); /* 6 */
+ UART_REG(spr); /* 7 */
+#ifdef CONFIG_SOC_DA8XX
+ UART_REG(reg8); /* 8 */
+ UART_REG(reg9); /* 9 */
+ UART_REG(revid1); /* A */
+ UART_REG(revid2); /* B */
+ UART_REG(pwr_mgmt); /* C */
+ UART_REG(mdr1); /* D */
+#else
+ UART_REG(mdr1); /* 8 */
+ UART_REG(reg9); /* 9 */
+ UART_REG(regA); /* A */
+ UART_REG(regB); /* B */
+ UART_REG(regC); /* C */
+ UART_REG(regD); /* D */
+ UART_REG(regE); /* E */
+ UART_REG(uasr); /* F */
+ UART_REG(scr); /* 10*/
+ UART_REG(ssr); /* 11*/
+ UART_REG(reg12); /* 12*/
+ UART_REG(osc_12m_sel); /* 13*/
+#endif
+};
+
+#define thr rbr
+#define iir fcr
+#define dll rbr
+#define dlm ier
+
+typedef struct NS16550 *NS16550_t;
+
+/*
+ * These are the definitions for the FIFO Control Register
+ */
+#define UART_FCR_FIFO_EN 0x01 /* Fifo enable */
+#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */
+#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */
+#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */
+#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */
+#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */
+#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */
+#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */
+#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */
+
+#define UART_FCR_RXSR 0x02 /* Receiver soft reset */
+#define UART_FCR_TXSR 0x04 /* Transmitter soft reset */
+
+/*
+ * These are the definitions for the Modem Control Register
+ */
+#define UART_MCR_DTR 0x01 /* DTR */
+#define UART_MCR_RTS 0x02 /* RTS */
+#define UART_MCR_OUT1 0x04 /* Out 1 */
+#define UART_MCR_OUT2 0x08 /* Out 2 */
+#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
+
+#define UART_MCR_DMA_EN 0x04
+#define UART_MCR_TX_DFR 0x08
+
+/*
+ * These are the definitions for the Line Control Register
+ *
+ * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting
+ * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
+ */
+#define UART_LCR_WLS_MSK 0x03 /* character length select mask */
+#define UART_LCR_WLS_5 0x00 /* 5 bit character length */
+#define UART_LCR_WLS_6 0x01 /* 6 bit character length */
+#define UART_LCR_WLS_7 0x02 /* 7 bit character length */
+#define UART_LCR_WLS_8 0x03 /* 8 bit character length */
+#define UART_LCR_STB 0x04 /* # stop Bits, off=1, on=1.5 or 2) */
+#define UART_LCR_PEN 0x08 /* Parity eneble */
+#define UART_LCR_EPS 0x10 /* Even Parity Select */
+#define UART_LCR_STKP 0x20 /* Stick Parity */
+#define UART_LCR_SBRK 0x40 /* Set Break */
+#define UART_LCR_BKSE 0x80 /* Bank select enable */
+#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
+
+/*
+ * These are the definitions for the Line Status Register
+ */
+#define UART_LSR_DR 0x01 /* Data ready */
+#define UART_LSR_OE 0x02 /* Overrun */
+#define UART_LSR_PE 0x04 /* Parity error */
+#define UART_LSR_FE 0x08 /* Framing error */
+#define UART_LSR_BI 0x10 /* Break */
+#define UART_LSR_THRE 0x20 /* Xmit holding register empty */
+#define UART_LSR_TEMT 0x40 /* Xmitter empty */
+#define UART_LSR_ERR 0x80 /* Error */
+
+#define UART_MSR_DCD 0x80 /* Data Carrier Detect */
+#define UART_MSR_RI 0x40 /* Ring Indicator */
+#define UART_MSR_DSR 0x20 /* Data Set Ready */
+#define UART_MSR_CTS 0x10 /* Clear to Send */
+#define UART_MSR_DDCD 0x08 /* Delta DCD */
+#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */
+#define UART_MSR_DDSR 0x02 /* Delta DSR */
+#define UART_MSR_DCTS 0x01 /* Delta CTS */
+
+/*
+ * These are the definitions for the Interrupt Identification Register
+ */
+#define UART_IIR_NO_INT 0x01 /* No interrupts pending */
+#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */
+
+#define UART_IIR_MSI 0x00 /* Modem status interrupt */
+#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */
+#define UART_IIR_RDI 0x04 /* Receiver data interrupt */
+#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */
+
+/*
+ * These are the definitions for the Interrupt Enable Register
+ */
+#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */
+#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */
+#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */
+#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */
+
+
+#ifdef CONFIG_OMAP1510
+#define OSC_12M_SEL 0x01 /* selects 6.5 * current clk div */
+#endif
+
+/* useful defaults for LCR */
+#define UART_LCR_8N1 0x03
+
+void NS16550_init(NS16550_t com_port, int baud_divisor);
+void NS16550_putc(NS16550_t com_port, char c);
+char NS16550_getc(NS16550_t com_port);
+int NS16550_tstc(NS16550_t com_port);
+void NS16550_reinit(NS16550_t com_port, int baud_divisor);
diff --git a/src/soc/broadcom/cygnus/ns16550.c b/src/soc/broadcom/cygnus/ns16550.c
new file mode 100644
index 0000000000..cbb32e0155
--- /dev/null
+++ b/src/soc/broadcom/cygnus/ns16550.c
@@ -0,0 +1,301 @@
+/*
+ * (C) Copyright 2000
+ * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/compiler.h>
+
+#include <ns16550.h>
+#ifdef CONFIG_NS87308
+#include <ns87308.h>
+#endif
+
+#include <serial.h>
+
+#ifndef CONFIG_NS16550_MIN_FUNCTIONS
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if !defined(CONFIG_CONS_INDEX)
+#elif (CONFIG_CONS_INDEX < 1) || (CONFIG_CONS_INDEX > 6)
+#error "Invalid console index value."
+#endif
+
+#if CONFIG_CONS_INDEX == 1 && !defined(CONFIG_SYS_NS16550_COM1)
+#error "Console port 1 defined but not configured."
+#elif CONFIG_CONS_INDEX == 2 && !defined(CONFIG_SYS_NS16550_COM2)
+#error "Console port 2 defined but not configured."
+#elif CONFIG_CONS_INDEX == 3 && !defined(CONFIG_SYS_NS16550_COM3)
+#error "Console port 3 defined but not configured."
+#elif CONFIG_CONS_INDEX == 4 && !defined(CONFIG_SYS_NS16550_COM4)
+#error "Console port 4 defined but not configured."
+#elif CONFIG_CONS_INDEX == 5 && !defined(CONFIG_SYS_NS16550_COM5)
+#error "Console port 5 defined but not configured."
+#elif CONFIG_CONS_INDEX == 6 && !defined(CONFIG_SYS_NS16550_COM6)
+#error "Console port 6 defined but not configured."
+#endif
+
+/* Note: The port number specified in the functions is 1 based.
+ * the array is 0 based.
+ */
+static NS16550_t serial_ports[6] = {
+#ifdef CONFIG_SYS_NS16550_COM1
+ (NS16550_t)CONFIG_SYS_NS16550_COM1,
+#else
+ NULL,
+#endif
+#ifdef CONFIG_SYS_NS16550_COM2
+ (NS16550_t)CONFIG_SYS_NS16550_COM2,
+#else
+ NULL,
+#endif
+#ifdef CONFIG_SYS_NS16550_COM3
+ (NS16550_t)CONFIG_SYS_NS16550_COM3,
+#else
+ NULL,
+#endif
+#ifdef CONFIG_SYS_NS16550_COM4
+ (NS16550_t)CONFIG_SYS_NS16550_COM4,
+#else
+ NULL,
+#endif
+#ifdef CONFIG_SYS_NS16550_COM5
+ (NS16550_t)CONFIG_SYS_NS16550_COM5,
+#else
+ NULL,
+#endif
+#ifdef CONFIG_SYS_NS16550_COM6
+ (NS16550_t)CONFIG_SYS_NS16550_COM6
+#else
+ NULL
+#endif
+};
+
+#define PORT serial_ports[port-1]
+
+/* Multi serial device functions */
+#define DECLARE_ESERIAL_FUNCTIONS(port) \
+ static int eserial##port##_init(void) \
+ { \
+ int clock_divisor; \
+ clock_divisor = calc_divisor(serial_ports[port-1]); \
+ NS16550_init(serial_ports[port-1], clock_divisor); \
+ return 0 ; \
+ } \
+ static void eserial##port##_setbrg(void) \
+ { \
+ serial_setbrg_dev(port); \
+ } \
+ static int eserial##port##_getc(void) \
+ { \
+ return serial_getc_dev(port); \
+ } \
+ static int eserial##port##_tstc(void) \
+ { \
+ return serial_tstc_dev(port); \
+ } \
+ static void eserial##port##_putc(const char c) \
+ { \
+ serial_putc_dev(port, c); \
+ } \
+ static void eserial##port##_puts(const char *s) \
+ { \
+ serial_puts_dev(port, s); \
+ }
+
+/* Serial device descriptor */
+#define INIT_ESERIAL_STRUCTURE(port, __name) { \
+ .name = __name, \
+ .start = eserial##port##_init, \
+ .stop = NULL, \
+ .setbrg = eserial##port##_setbrg, \
+ .getc = eserial##port##_getc, \
+ .tstc = eserial##port##_tstc, \
+ .putc = eserial##port##_putc, \
+ .puts = eserial##port##_puts, \
+}
+
+int calc_divisor(NS16550_t port)
+{
+#ifdef CONFIG_OMAP1510
+ /* If can't cleanly clock 115200 set div to 1 */
+ if ((CONFIG_SYS_NS16550_CLK == 12000000) && (gd->baudrate == 115200)) {
+ port->osc_12m_sel = OSC_12M_SEL; /* enable 6.5 * divisor */
+ return (1); /* return 1 for base divisor */
+ }
+ port->osc_12m_sel = 0; /* clear if previsouly set */
+#endif
+#ifdef CONFIG_OMAP1610
+ /* If can't cleanly clock 115200 set div to 1 */
+ if ((CONFIG_SYS_NS16550_CLK == 48000000) && (gd->baudrate == 115200)) {
+ return (26); /* return 26 for base divisor */
+ }
+#endif
+
+#define MODE_X_DIV 16
+ /* Compute divisor value. Normally, we should simply return:
+ * CONFIG_SYS_NS16550_CLK) / MODE_X_DIV / gd->baudrate
+ * but we need to round that value by adding 0.5.
+ * Rounding is especially important at high baud rates.
+ */
+ return (CONFIG_SYS_NS16550_CLK + (gd->baudrate * (MODE_X_DIV / 2))) /
+ (MODE_X_DIV * gd->baudrate);
+}
+
+void
+_serial_putc(const char c,const int port)
+{
+ if (c == '\n')
+ NS16550_putc(PORT, '\r');
+
+ NS16550_putc(PORT, c);
+}
+
+void
+_serial_putc_raw(const char c,const int port)
+{
+ NS16550_putc(PORT, c);
+}
+
+void
+_serial_puts (const char *s,const int port)
+{
+ while (*s) {
+ _serial_putc (*s++,port);
+ }
+}
+
+
+int
+_serial_getc(const int port)
+{
+ return NS16550_getc(PORT);
+}
+
+int
+_serial_tstc(const int port)
+{
+ return NS16550_tstc(PORT);
+}
+
+void
+_serial_setbrg (const int port)
+{
+ int clock_divisor;
+
+ clock_divisor = calc_divisor(PORT);
+ NS16550_reinit(PORT, clock_divisor);
+}
+
+static inline void
+serial_putc_dev(unsigned int dev_index,const char c)
+{
+ _serial_putc(c,dev_index);
+}
+
+static inline void
+serial_putc_raw_dev(unsigned int dev_index,const char c)
+{
+ _serial_putc_raw(c,dev_index);
+}
+
+static inline void
+serial_puts_dev(unsigned int dev_index,const char *s)
+{
+ _serial_puts(s,dev_index);
+}
+
+static inline int
+serial_getc_dev(unsigned int dev_index)
+{
+ return _serial_getc(dev_index);
+}
+
+static inline int
+serial_tstc_dev(unsigned int dev_index)
+{
+ return _serial_tstc(dev_index);
+}
+
+static inline void
+serial_setbrg_dev(unsigned int dev_index)
+{
+ _serial_setbrg(dev_index);
+}
+
+#if defined(CONFIG_SYS_NS16550_COM1)
+DECLARE_ESERIAL_FUNCTIONS(1);
+struct serial_device eserial1_device =
+ INIT_ESERIAL_STRUCTURE(1, "eserial0");
+#endif
+#if defined(CONFIG_SYS_NS16550_COM2)
+DECLARE_ESERIAL_FUNCTIONS(2);
+struct serial_device eserial2_device =
+ INIT_ESERIAL_STRUCTURE(2, "eserial1");
+#endif
+#if defined(CONFIG_SYS_NS16550_COM3)
+DECLARE_ESERIAL_FUNCTIONS(3);
+struct serial_device eserial3_device =
+ INIT_ESERIAL_STRUCTURE(3, "eserial2");
+#endif
+#if defined(CONFIG_SYS_NS16550_COM4)
+DECLARE_ESERIAL_FUNCTIONS(4);
+struct serial_device eserial4_device =
+ INIT_ESERIAL_STRUCTURE(4, "eserial3");
+#endif
+#if defined(CONFIG_SYS_NS16550_COM5)
+DECLARE_ESERIAL_FUNCTIONS(5);
+struct serial_device eserial5_device =
+ INIT_ESERIAL_STRUCTURE(5, "eserial4");
+#endif
+#if defined(CONFIG_SYS_NS16550_COM6)
+DECLARE_ESERIAL_FUNCTIONS(6);
+struct serial_device eserial6_device =
+ INIT_ESERIAL_STRUCTURE(6, "eserial5");
+#endif
+
+__weak struct serial_device *default_serial_console(void)
+{
+#if CONFIG_CONS_INDEX == 1
+ return &eserial1_device;
+#elif CONFIG_CONS_INDEX == 2
+ return &eserial2_device;
+#elif CONFIG_CONS_INDEX == 3
+ return &eserial3_device;
+#elif CONFIG_CONS_INDEX == 4
+ return &eserial4_device;
+#elif CONFIG_CONS_INDEX == 5
+ return &eserial5_device;
+#elif CONFIG_CONS_INDEX == 6
+ return &eserial6_device;
+#else
+#error "Bad CONFIG_CONS_INDEX."
+#endif
+}
+
+void ns16550_serial_initialize(void)
+{
+#if defined(CONFIG_SYS_NS16550_COM1)
+ serial_register(&eserial1_device);
+#endif
+#if defined(CONFIG_SYS_NS16550_COM2)
+ serial_register(&eserial2_device);
+#endif
+#if defined(CONFIG_SYS_NS16550_COM3)
+ serial_register(&eserial3_device);
+#endif
+#if defined(CONFIG_SYS_NS16550_COM4)
+ serial_register(&eserial4_device);
+#endif
+#if defined(CONFIG_SYS_NS16550_COM5)
+ serial_register(&eserial5_device);
+#endif
+#if defined(CONFIG_SYS_NS16550_COM6)
+ serial_register(&eserial6_device);
+#endif
+}
+
+#endif /* !CONFIG_NS16550_MIN_FUNCTIONS */