summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/mainboard/asus/a8n_e/Config.lb92
-rw-r--r--src/mainboard/asus/a8n_e/Options.lb283
-rw-r--r--src/mainboard/asus/a8n_e/cache_as_ram_auto.c21
-rw-r--r--src/mainboard/asus/a8n_e/get_bus_conf.c56
-rw-r--r--src/mainboard/asus/a8n_e/irq_tables.c60
-rw-r--r--src/mainboard/asus/a8n_e/mptable.c48
6 files changed, 162 insertions, 398 deletions
diff --git a/src/mainboard/asus/a8n_e/Config.lb b/src/mainboard/asus/a8n_e/Config.lb
index f6ae6ef2c4..48259fc75b 100644
--- a/src/mainboard/asus/a8n_e/Config.lb
+++ b/src/mainboard/asus/a8n_e/Config.lb
@@ -21,10 +21,6 @@
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
-##
-## Compute the location and size of where this firmware image
-## (coreboot plus bootloader) will live in the boot rom chip.
-##
if USE_FAILOVER_IMAGE
default ROM_SECTION_SIZE = FAILOVER_SIZE
default ROM_SECTION_OFFSET = (ROM_SIZE - FAILOVER_SIZE)
@@ -37,27 +33,12 @@ else
default ROM_SECTION_OFFSET = 0
end
end
-
-##
-## Compute the start location and size size of the coreboot bootloader.
-##
default PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
-
-##
-## Compute where this copy of coreboot will start in the boot ROM.
-##
-default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
-
-##
-## Compute a range of ROM that can be cached to speed up coreboot
-## execution speed.
-##
-## XIP_ROM_SIZE must be a power of 2 (here 64 Kbyte)
-## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
-##
-default XIP_ROM_SIZE = (64 * 1024)
-
+default _ROMBASE = (CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE)
+# XIP_ROM_SIZE must be a power of 2.
+# XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE.
+default XIP_ROM_SIZE = 64 * 1024
if USE_FAILOVER_IMAGE
default XIP_ROM_BASE = (_ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE)
else
@@ -67,28 +48,12 @@ else
default XIP_ROM_BASE = (_ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE)
end
end
-
arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
driver mainboard.o
-
-#dir /drivers/ati/ragexl
-
# Needed by irq_tables and mptable and acpi_tables.
object get_bus_conf.o
-
-if HAVE_MP_TABLE
- object mptable.o
-end
-
-if HAVE_PIRQ_TABLE
- object irq_tables.o
-end
-
+if HAVE_MP_TABLE object mptable.o end
+if HAVE_PIRQ_TABLE object irq_tables.o end
if USE_DCACHE_RAM
if CONFIG_USE_INIT
makerule ./auto.o
@@ -104,10 +69,6 @@ if USE_DCACHE_RAM
end
end
end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code.
-##
if HAVE_FAILOVER_BOOT
if USE_FAILOVER_IMAGE
mainboardinit cpu/x86/16bit/entry16.inc
@@ -119,19 +80,13 @@ else
ldscript /cpu/x86/16bit/entry16.lds
end
end
-
mainboardinit cpu/x86/32bit/entry32.inc
-
if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
ldscript /cpu/amd/car/cache_as_ram.lds
end
end
-
-##
-## Build our reset vector (this is where coreboot is entered).
-##
if HAVE_FAILOVER_BOOT
if USE_FAILOVER_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
@@ -149,22 +104,14 @@ else
ldscript /cpu/x86/32bit/reset32.lds
end
end
-
if USE_DCACHE_RAM
else
- ### Should this be in the northbridge code?
mainboardinit arch/i386/lib/cpu_reset.inc
end
-
-##
-## Include an ID string (for safe flashing).
-##
+# Include an ID string (for safe flashing).
mainboardinit southbridge/nvidia/ck804/id.inc
ldscript /southbridge/nvidia/ck804/id.lds
-
-##
-## ROMSTRAP table for CK804
-##
+# ROMSTRAP table for CK804.
if HAVE_FAILOVER_BOOT
if USE_FAILOVER_IMAGE
mainboardinit southbridge/nvidia/ck804/romstrap.inc
@@ -176,20 +123,9 @@ else
ldscript /southbridge/nvidia/ck804/romstrap.lds
end
end
-
if USE_DCACHE_RAM
- ##
- ## Setup Cache-As-Ram
- ##
mainboardinit cpu/amd/car/cache_as_ram.inc
end
-
-
-###
-### This is the early phase of coreboot startup.
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
if HAVE_FAILOVER_BOOT
if USE_FAILOVER_IMAGE
if USE_DCACHE_RAM
@@ -203,14 +139,6 @@ else
end
end
end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
if USE_DCACHE_RAM
if CONFIG_USE_INIT
initobject auto.o
@@ -218,10 +146,6 @@ if USE_DCACHE_RAM
mainboardinit ./auto.inc
end
end
-
-##
-## Include the secondary configuration files
-##
if CONFIG_CHIP_NAME
config chip.h
end
diff --git a/src/mainboard/asus/a8n_e/Options.lb b/src/mainboard/asus/a8n_e/Options.lb
index e4eef79986..3e3f2ce03f 100644
--- a/src/mainboard/asus/a8n_e/Options.lb
+++ b/src/mainboard/asus/a8n_e/Options.lb
@@ -80,7 +80,6 @@ uses CONFIG_CHIP_NAME
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
uses HW_MEM_HOLE_SIZEK
-
uses USE_DCACHE_RAM
uses DCACHE_RAM_BASE
uses DCACHE_RAM_SIZE
@@ -89,233 +88,81 @@ uses DCACHE_RAM_GLOBAL_VAR_SIZE
uses CONFIG_AP_CODE_IN_CAR
uses MEM_TRAIN_SEQ
uses WAIT_BEFORE_CPUS_INIT
-
uses ENABLE_APIC_EXT_ID
uses APIC_ID_OFFSET
uses LIFT_BSP_APIC_ID
-
uses CONFIG_PCI_64BIT_PREF_MEM
-
uses HT_CHAIN_UNITID_BASE
uses HT_CHAIN_END_UNITID_BASE
uses SB_HT_CHAIN_ON_BUS0
uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
uses CONFIG_LB_MEM_TOPK
-
-## ROM_SIZE is the size of boot ROM that this board will use.
-## ---> 512 Kbytes
-default ROM_SIZE=(512*1024)
-
-##
-## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
-##
-default FALLBACK_SIZE=(252*1024)
-
-#FAILOVER: 4K
-default FAILOVER_SIZE=(4*1024)
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot
-##
-default HAVE_FALLBACK_BOOT=1
-default HAVE_FAILOVER_BOOT=1
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default HAVE_HARD_RESET=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default HAVE_PIRQ_TABLE=1
-default IRQ_SLOT_COUNT=13
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default HAVE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default HAVE_OPTION_TABLE=1
-
-##
-## Move the default coreboot cmos range off of AMD RTC registers
-##
-default LB_CKS_RANGE_START=49
-default LB_CKS_RANGE_END=122
-default LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=2
-default CONFIG_MAX_PHYSICAL_CPUS=1
-default CONFIG_LOGICAL_CPUS=1
-
-#1G memory hole
-default HW_MEM_HOLE_SIZEK=0x100000
-
-##HT Unit ID offset, default is 1, the typical one
-default HT_CHAIN_UNITID_BASE=0
-
-##real SB Unit ID, default is 0x20, mean dont touch it at last
-#default HT_CHAIN_END_UNITID_BASE=0x10
-
-#make the SB HT chain on bus 0, default is not (0)
-default SB_HT_CHAIN_ON_BUS0=2
-
-##only offset for SB chain?, default is yes(1)
-default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
-
-#BTEXT Console
-#default CONFIG_CONSOLE_BTEXT=1
-
-#VGA Console
-default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
-
-##
-## enable CACHE_AS_RAM specifics
-##
-default USE_DCACHE_RAM=1
-#default DCACHE_RAM_BASE=0xcf000
-#default DCACHE_RAM_SIZE=0x1000
-default DCACHE_RAM_BASE=0xc8000
-default DCACHE_RAM_SIZE=0x08000
-default DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
-default CONFIG_USE_INIT=0
-
-default CONFIG_AP_CODE_IN_CAR=0
-default MEM_TRAIN_SEQ=2
-default WAIT_BEFORE_CPUS_INIT=0
-
-## APIC stuff
-#default ENABLE_APIC_EXT_ID=0
-#default APIC_ID_OFFSET=0x10
-#default LIFT_BSP_APIC_ID=0
-
-
-#default CONFIG_PCI_64BIT_PREF_MEM=1
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default MAINBOARD_PART_NUMBER="A8NE"
-default MAINBOARD_VENDOR="ASUS"
-default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
-default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2891
-
-###
-### coreboot layout values
-###
-
-## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default ROM_IMAGE_SIZE = (64*1024)
-#65536
-
-##
-## Use a small 8K stack
-##
-default STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#efault USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
-default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE )
-
-##
-## Coreboot C code runs at this location in RAM
-##
-default _RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
+default ROM_SIZE = 512 * 1024
+default ROM_IMAGE_SIZE = 64 * 1024
+default FALLBACK_SIZE = 252 * 1024
+default FAILOVER_SIZE = 4 * 1024
+default HAVE_FALLBACK_BOOT = 1
+default HAVE_FAILOVER_BOOT = 1
+default HAVE_HARD_RESET = 1
+default HAVE_PIRQ_TABLE = 1
+default IRQ_SLOT_COUNT = 13
+default HAVE_MP_TABLE = 1
+default HAVE_OPTION_TABLE = 1
+# Move the default coreboot CMOS range off of AMD RTC registers.
+default LB_CKS_RANGE_START = 49
+default LB_CKS_RANGE_END = 122
+default LB_CKS_LOC = 123
+# SMP support (only worry about 2 micro processors).
+default CONFIG_SMP = 1
+default CONFIG_MAX_CPUS = 2
+default CONFIG_MAX_PHYSICAL_CPUS = 1
+default CONFIG_LOGICAL_CPUS = 1
+# 1G memory hole.
+default HW_MEM_HOLE_SIZEK = 0x100000
+# HT Unit ID offset, default is 1, the typical one.
+default HT_CHAIN_UNITID_BASE = 0
+# Real SB Unit ID, default is 0x20, mean don't touch it at last.
+# default HT_CHAIN_END_UNITID_BASE = 0x10
+# Make the SB HT chain on bus 0, default is not (0).
+default SB_HT_CHAIN_ON_BUS0 = 2
+# Only offset for SB chain?, default is yes(1).
+default SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0
+# default CONFIG_CONSOLE_BTEXT = 1 # BTEXT console
+default CONFIG_CONSOLE_VGA = 1 # For VGA console
+default CONFIG_PCI_ROM_RUN = 1 # For VGA console
+default USE_DCACHE_RAM = 1
+default DCACHE_RAM_BASE = 0xc8000
+default DCACHE_RAM_SIZE = 32 * 1024
+default DCACHE_RAM_GLOBAL_VAR_SIZE = 4 * 1024
+default CONFIG_USE_INIT = 0
+default CONFIG_AP_CODE_IN_CAR = 0
+default MEM_TRAIN_SEQ = 2
+default WAIT_BEFORE_CPUS_INIT = 0
+# default ENABLE_APIC_EXT_ID = 0
+# default APIC_ID_OFFSET = 0x10
+# default LIFT_BSP_APIC_ID = 0
+# default CONFIG_PCI_64BIT_PREF_MEM = 1
+default CONFIG_IOAPIC = 1
+default MAINBOARD_PART_NUMBER = "A8N-E"
+default MAINBOARD_VENDOR = "ASUS"
+default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x10f1
+default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID = 0x2891
+default STACK_SIZE = 8 * 1024
+default HEAP_SIZE = 16 * 1024
+# Only use the option table in a normal image.
+default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE)
+default _RAMBASE = 0x00004000
default CONFIG_ROM_PAYLOAD = 1
+default CC = "$(CROSS_COMPILE)gcc -m32"
+default HOSTCC = "gcc"
+default CONFIG_GDB_STUB = 0
+default CONFIG_CONSOLE_SERIAL8250 = 1
+default TTYS0_BAUD = 115200
+default TTYS0_BASE = 0x3f8
+default TTYS0_LCS = 0x3
+default DEFAULT_CONSOLE_LOGLEVEL = 8
+default MAXIMUM_CONSOLE_LOGLEVEL = 8
+default MAINBOARD_POWER_ON_AFTER_POWER_FAIL = "MAINBOARD_POWER_ON"
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default TTYS0_BAUD=115200
-#default TTYS0_BAUD=57600
-#default TTYS0_BAUD=38400
-#default TTYS0_BAUD=19200
-#default TTYS0_BAUD=9600
-#default TTYS0_BAUD=4800
-#default TTYS0_BAUD=2400
-#default TTYS0_BAUD=1200
-
-# Select the serial console base port
-default TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-### End Options.lb
end
diff --git a/src/mainboard/asus/a8n_e/cache_as_ram_auto.c b/src/mainboard/asus/a8n_e/cache_as_ram_auto.c
index 5f8e93ba4e..44f0bb3e96 100644
--- a/src/mainboard/asus/a8n_e/cache_as_ram_auto.c
+++ b/src/mainboard/asus/a8n_e/cache_as_ram_auto.c
@@ -76,17 +76,17 @@
static void memreset_setup(void)
{
- /* FIXME: Nothing to do? */
+ /* Nothing to do. */
}
static void memreset(int controllers, const struct mem_controller *ctrl)
{
- /* FIXME: Nothing to do? */
+ /* Nothing to do. */
}
static inline void activate_spd_rom(const struct mem_controller *ctrl)
{
- /* FIXME: Nothing to do? */
+ /* Nothing to do. */
}
static inline int spd_read_byte(unsigned device, unsigned address)
@@ -123,8 +123,7 @@ static void sio_setup(void)
/* LPC Positive Decode 0 */
dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0xa0);
- /* Serial 0, Serial 1 */
- dword |= (1 << 0) | (1 << 1);
+ dword |= (1 << 0) | (1 << 1); /* Serial 0, Serial 1 */
pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0xa0, dword);
}
@@ -212,14 +211,11 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
};
int needs_reset;
- unsigned bsp_apicid = 0;
-
+ unsigned nodes, bsp_apicid = 0;
struct mem_controller ctrl[8];
- unsigned nodes;
- if (bist == 0) {
+ if (bist == 0)
bsp_apicid = init_cpus(cpu_init_detectedx);
- }
it8712f_24mhz_clkin();
it8712f_enable_serial(SERIAL_DEV, TTYS0_BASE);
@@ -237,13 +233,12 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
wait_all_core0_started();
#if CONFIG_LOGICAL_CPUS==1
- // It is said that we should start core1 after all core0 launched
+ /* It is said that we should start core1 after all core0 launched. */
start_other_cores();
wait_all_other_cores_started(bsp_apicid);
#endif
needs_reset |= ht_setup_chains_x();
-
needs_reset |= ck804_early_setup_x();
if (needs_reset) {
@@ -254,7 +249,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
allow_all_aps_stop(bsp_apicid);
nodes = get_nodes();
- //It's the time to set ctrl now;
+ /* It's the time to set ctrl now. */
fill_mem_ctrl(nodes, ctrl, spd_addr);
enable_smbus();
diff --git a/src/mainboard/asus/a8n_e/get_bus_conf.c b/src/mainboard/asus/a8n_e/get_bus_conf.c
index 3c1e4f77fd..141bd50402 100644
--- a/src/mainboard/asus/a8n_e/get_bus_conf.c
+++ b/src/mainboard/asus/a8n_e/get_bus_conf.c
@@ -26,13 +26,14 @@
#include <device/pci_ids.h>
#include <string.h>
#include <stdint.h>
+#include <stdlib.h>
#if CONFIG_LOGICAL_CPUS == 1
#include <cpu/amd/dualcore.h>
#endif
-
#include <cpu/amd/amdk8_sysconf.h>
-/* Global variables for MB layouts and these will be shared by irqtable,
+/*
+ * Global variables for MB layouts and these will be shared by irqtable,
* mptable and acpi_tables.
*/
/* busnum is default */
@@ -40,13 +41,23 @@ unsigned char bus_isa;
unsigned char bus_ck804[6];
unsigned apicid_ck804;
-unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not
- //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
- 0x0000ff0, //no HTIO for a8n_e
+/*
+ * Here you only need to set value in pci1234 for HT-IO that could be installed
+ * or not. You may need to preset pci1234 for HT-IO board, please refer to
+ * src/northbridge/amd/amdk8/get_sblk_pci1234.c for details.
+ */
+unsigned pci1234x[] = {
+ 0x0000ff0, /* No HTIO for A8N-E */
};
-unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
- 0x20202020, //a8n_e has only one ht-chain
+
+/*
+ * HT Chain device num, actually it is unit id base of every ht device in
+ * chain, assume every chain only have 4 ht device at most.
+ */
+unsigned hcdnx[] = {
+ 0x20202020, /* A8N-E has only one ht-chain */
};
+
unsigned bus_type[256];
extern void get_sblk_pci1234(void);
@@ -55,19 +66,18 @@ static unsigned get_bus_conf_done = 0;
void get_bus_conf(void)
{
- unsigned apicid_base;
-
+ unsigned apicid_base, sbdn;
device_t dev;
- unsigned sbdn;
int i, j;
if (get_bus_conf_done == 1)
- return; //do it only once
+ return; /* Do it only once. */
get_bus_conf_done = 1;
- sysconf.hc_possible_num = sizeof(pci1234x) / sizeof(pci1234x[0]);
- sysconf.hc_possible_num = sizeof(pci1234x) / sizeof(pci1234x[0]);
+ /* FIXME: Is this really needed twice? */
+ sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
+ sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
for (i = 0; i < sysconf.hc_possible_num; i++) {
sysconf.pci1234[i] = pci1234x[i];
sysconf.hcdn[i] = hcdnx[i];
@@ -75,18 +85,15 @@ void get_bus_conf(void)
get_sblk_pci1234();
- sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain
+ sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain
sbdn = sysconf.sbdn;
- for (i = 0; i < 6; i++) {
+ for (i = 0; i < 6; i++)
bus_ck804[i] = 0;
- }
-
- for (i = 0; i < 256; i++) {
+ for (i = 0; i < 256; i++)
bus_type[i] = 0;
- }
- bus_type[0] = 1; //pci
+ bus_type[0] = 1; /* PCI */
bus_ck804[0] = (sysconf.pci1234[0] >> 16) & 0xff;
@@ -107,9 +114,8 @@ void get_bus_conf(void)
}
for (i = 2; i < 6; i++) {
- dev =
- dev_find_slot(bus_ck804[0],
- PCI_DEVFN(sbdn + 0x0b + i - 2, 0));
+ dev = dev_find_slot(bus_ck804[0],
+ PCI_DEVFN(sbdn + 0x0b + i - 2, 0));
if (dev) {
bus_ck804[i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
@@ -117,14 +123,12 @@ void get_bus_conf(void)
for (j = bus_ck804[i]; j < bus_isa; j++)
bus_type[j] = 1;
} else {
- printk_debug
- ("ERROR - could not find PCI %02x:%02x.0, using defaults\n",
+ printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n",
bus_ck804[0], sbdn + 0x0b + i - 2);
bus_isa = bus_ck804[i - 1] + 1;
}
}
-/*I/O APICs: APIC ID Version State Address*/
#if CONFIG_LOGICAL_CPUS==1
apicid_base = get_apicid_base(3);
#else
diff --git a/src/mainboard/asus/a8n_e/irq_tables.c b/src/mainboard/asus/a8n_e/irq_tables.c
index 9ae15f8cba..4c9417fdc4 100644
--- a/src/mainboard/asus/a8n_e/irq_tables.c
+++ b/src/mainboard/asus/a8n_e/irq_tables.c
@@ -21,8 +21,6 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-/* Documentation at: http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM */
-
#include <console/console.h>
#include <device/pci.h>
#include <string.h>
@@ -63,18 +61,14 @@ static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus,
*/
unsigned long write_pirq_routing_table(unsigned long addr)
{
-
struct irq_routing_table *pirq;
struct irq_info *pirq_info;
- unsigned slot_num;
- uint8_t *v;
-
- uint8_t sum = 0;
+ unsigned slot_num, sbdn;
+ uint8_t *v, sum = 0;
int i;
- unsigned sbdn;
- /* get_bus_conf() will find out all bus num and apic that share with
- * mptable.c and mptable.c
+ /* get_bus_conf() will find out all bus num and APIC that share with
+ * mptable.c and mptable.c.
*/
get_bus_conf();
sbdn = sysconf.sbdn;
@@ -83,23 +77,19 @@ unsigned long write_pirq_routing_table(unsigned long addr)
addr += 15;
addr &= ~15;
- /* This table must be betweeen 0xf0000 & 0x100000 */
+ /* This table must be betweeen 0xf0000 & 0x100000. */
printk_info("Writing IRQ routing tables to 0x%x...", addr);
pirq = (void *)(addr);
- v = (uint8_t *) (addr);
+ v = (uint8_t *)(addr);
pirq->signature = PIRQ_SIGNATURE;
pirq->version = PIRQ_VERSION;
-
pirq->rtr_bus = bus_ck804[0];
pirq->rtr_devfn = ((sbdn + 9) << 3) | 0;
-
pirq->exclusive_irqs = 0x828;
-
pirq->rtr_vendor = 0x10de;
pirq->rtr_device = 0x005c;
-
pirq->miniport_data = 0;
memset(pirq->rfu, 0, sizeof(pirq->rfu));
@@ -107,32 +97,31 @@ unsigned long write_pirq_routing_table(unsigned long addr)
pirq_info = (void *)(&pirq->checksum + 1);
slot_num = 0;
-//Slot1 PCIE 16x
+ /* Slot1 PCIE 16x */
write_pirq_info(pirq_info, bus_ck804[1], (0 << 3) | 0, 0x3, 0xdeb8, 0x4,
0xdeb8, 0x1, 0xdeb8, 0x2, 0xdeb8, 4, 0);
pirq_info++;
slot_num++;
-//Slot2 PCIE 1x
+ /* Slot2 PCIE 1x */
write_pirq_info(pirq_info, bus_ck804[2], (0 << 3) | 0, 0x4, 0xdeb8, 0x1,
0xdeb8, 0x2, 0xdeb8, 0x3, 0xdeb8, 5, 0);
pirq_info++;
slot_num++;
-//Slot3 PCIE 1x
+ /* Slot3 PCIE 1x */
write_pirq_info(pirq_info, bus_ck804[3], (0 << 3) | 0, 0x1, 0xdeb8, 0x2,
0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 6, 0);
pirq_info++;
slot_num++;
-//Slot4 PCIE 4x
- write_pirq_info(pirq_info, bus_ck804[4], (0x4 << 3) | 0,
- 0x2, 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 0x1, 0xdeb8,
- 7, 0);
+ /* Slot4 PCIE 4x */
+ write_pirq_info(pirq_info, bus_ck804[4], (0x4 << 3) | 0, 0x2,
+ 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 0x1, 0xdeb8, 7, 0);
pirq_info++;
slot_num++;
-//Slot5 - 7 PCI
+ /* Slot5 - Slot7 PCI */
for (i = 0; i < 3; i++) {
write_pirq_info(pirq_info, bus_ck804[5], (0 << (6 + i)) | 0,
((i + 0) % 4) + 1, 0xdeb8,
@@ -143,47 +132,50 @@ unsigned long write_pirq_routing_table(unsigned long addr)
slot_num++;
}
-//pci bridge
+ /* PCI bridge */
write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 9) << 3) | 0, 0x1,
0xdeb8, 0x2, 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 0, 0);
pirq_info++;
slot_num++;
-//smbus
+ /* SMBus */
write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 1) << 3) | 0, 0x2,
0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0);
pirq_info++;
slot_num++;
-//usb
+ /* USB */
write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 2) << 3) | 0, 0x1,
0xdeb8, 0x2, 0xdeb8, 0, 0, 0, 0, 0, 0);
pirq_info++;
slot_num++;
-//audio
+ /* Audio */
write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 4) << 3) | 0, 0x1,
0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0);
pirq_info++;
slot_num++;
-//sata
+
+ /* SATA */
write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 7) << 3) | 0, 0x1,
0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0);
pirq_info++;
slot_num++;
-//sata
+
+ /* SATA */
write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 8) << 3) | 0, 0x1,
0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0);
pirq_info++;
slot_num++;
-//nic
+
+ /* NIC */
write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 0xa) << 3) | 0, 0x1,
0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0);
pirq_info++;
slot_num++;
#if 0
-//firewire ??
+ /* Firewire? */
write_pirq_info(pirq_info, bus_ck804_1, (0x5 << 3) | 0, 0x3, 0xdeb8, 0,
0, 0, 0, 0, 0, 0, 0);
pirq_info++;
@@ -196,10 +188,8 @@ unsigned long write_pirq_routing_table(unsigned long addr)
sum += v[i];
sum = pirq->checksum - sum;
-
- if (sum != pirq->checksum) {
+ if (sum != pirq->checksum)
pirq->checksum = sum;
- }
printk_info("done.\n");
diff --git a/src/mainboard/asus/a8n_e/mptable.c b/src/mainboard/asus/a8n_e/mptable.c
index 9f587eac51..9fe1f60aa8 100644
--- a/src/mainboard/asus/a8n_e/mptable.c
+++ b/src/mainboard/asus/a8n_e/mptable.c
@@ -26,27 +26,22 @@
#include <device/pci.h>
#include <string.h>
#include <stdint.h>
-
#include <cpu/amd/amdk8_sysconf.h>
extern unsigned char bus_isa;
extern unsigned char bus_ck804[6];
extern unsigned apicid_ck804;
-
extern unsigned bus_type[256];
-
extern void get_bus_conf(void);
void *smp_write_config_table(void *v)
{
static const char sig[4] = "PCMP";
static const char oem[8] = "ASUS ";
- static const char productid[12] = "A8NE ";
+ static const char productid[12] = "A8N-E ";
struct mp_config_table *mc;
unsigned sbdn;
-
- int bus_num;
- int i;
+ int i, bus_num;
mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
memset(mc, 0, sizeof(*mc));
@@ -70,15 +65,15 @@ void *smp_write_config_table(void *v)
get_bus_conf();
sbdn = sysconf.sbdn;
-/* Bus: Bus ID Type*/
- /* define numbers for pci and isa bus */
+ /* Bus: Bus ID Type */
+ /* Define numbers for PCI and ISA bus. */
for (bus_num = 0; bus_num < 256; bus_num++) {
if (bus_type[bus_num])
smp_write_bus(mc, bus_num, "PCI ");
- }
+ }
smp_write_bus(mc, bus_isa, "ISA ");
-/* I/O APICs: APIC ID Version State Address*/
+ /* I/O APICs: APIC ID Version State Address */
{
device_t dev;
struct resource *res;
@@ -92,7 +87,7 @@ void *smp_write_config_table(void *v)
res->base);
}
- /* Initialize interrupt mapping */
+ /* Initialize interrupt mapping. */
dword = 0x01200000;
pci_write_config32(dev, 0x7c, dword);
@@ -105,7 +100,7 @@ void *smp_write_config_table(void *v)
}
}
-/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+ /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
smp_write_intsrc(mc, mp_ExtINT,
MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
bus_isa, 0x0, apicid_ck804, 0x0);
@@ -151,21 +146,31 @@ void *smp_write_config_table(void *v)
0xa);
// Onboard ck804 USB 1.1
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_ck804[0], ((sbdn + 2) << 2) | 0, apicid_ck804, 0x15);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ bus_ck804[0], ((sbdn + 2) << 2) | 0, apicid_ck804,
+ 0x15);
// Onboard ck804 USB 2
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_ck804[0], ((sbdn + 2) << 2) | 1, apicid_ck804, 0x14);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ bus_ck804[0], ((sbdn + 2) << 2) | 1, apicid_ck804,
+ 0x14);
// Onboard ck804 SATA 0
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_ck804[0], ((sbdn + 7) << 2) | 0, apicid_ck804, 0x17);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ bus_ck804[0], ((sbdn + 7) << 2) | 0, apicid_ck804,
+ 0x17);
// Onboard ck804 SATA 1
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_ck804[0], ((sbdn + 8) << 2) | 0, apicid_ck804, 0x16);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ bus_ck804[0], ((sbdn + 8) << 2) | 0, apicid_ck804,
+ 0x16);
// Onboard ck804 NIC
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_ck804[0], ((sbdn + 10) << 2) | 0, apicid_ck804, 0x17);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW,
+ bus_ck804[0], ((sbdn + 10) << 2) | 0, apicid_ck804,
+ 0x17);
-/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
+ /* Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
smp_write_intsrc(mc, mp_ExtINT,
MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
bus_ck804[0], 0x0, MP_APIC_ALL, 0x0);
@@ -175,7 +180,7 @@ void *smp_write_config_table(void *v)
/* There is no extension information... */
- /* Compute the checksums */
+ /* Compute the checksums. */
mc->mpe_checksum =
smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
@@ -186,7 +191,6 @@ void *smp_write_config_table(void *v)
unsigned long write_smp_table(unsigned long addr)
{
- void *v;
- v = smp_write_floating_table(addr);
+ void *v = smp_write_floating_table(addr);
return (unsigned long)smp_write_config_table(v);
}