diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/mainboard/asus/m2v-mx_se/Config.lb | 196 | ||||
| -rw-r--r-- | src/mainboard/asus/m2v-mx_se/Options.lb | 168 | ||||
| -rw-r--r-- | src/mainboard/asus/m2v-mx_se/acpi_tables.c | 163 | ||||
| -rw-r--r-- | src/mainboard/asus/m2v-mx_se/cache_as_ram_auto.c | 294 | ||||
| -rw-r--r-- | src/mainboard/asus/m2v-mx_se/chip.h | 23 | ||||
| -rw-r--r-- | src/mainboard/asus/m2v-mx_se/cmos.layout | 98 | ||||
| -rw-r--r-- | src/mainboard/asus/m2v-mx_se/dsdt.asl | 191 | ||||
| -rw-r--r-- | src/mainboard/asus/m2v-mx_se/fadt.c | 153 | ||||
| -rw-r--r-- | src/mainboard/asus/m2v-mx_se/mainboard.c | 30 | ||||
| -rw-r--r-- | src/mainboard/asus/m2v-mx_se/mptable.c | 32 |
10 files changed, 1348 insertions, 0 deletions
diff --git a/src/mainboard/asus/m2v-mx_se/Config.lb b/src/mainboard/asus/m2v-mx_se/Config.lb new file mode 100644 index 0000000000..7d9e430f02 --- /dev/null +++ b/src/mainboard/asus/m2v-mx_se/Config.lb @@ -0,0 +1,196 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 AMD +## (Written by Yinghai Lu <yinghailu@amd.com> for AMD) +## Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +if USE_FALLBACK_IMAGE + default ROM_SECTION_SIZE = FALLBACK_SIZE + default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) +else + default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) + default ROM_SECTION_OFFSET = 0 +end + +default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_PAYLOAD = 1 +default _ROMBASE = (CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE) + +##WARNING enable caching of whole ROM during CAR +default XIP_ROM_SIZE = ROM_SIZE +default XIP_ROM_BASE = 0xffffffff + 1 - XIP_ROM_SIZE + +arch i386 end + +driver mainboard.o +if HAVE_ACPI_TABLES + object acpi_tables.o + object fadt.o + makerule dsdt.c + depends "$(MAINBOARD)/dsdt.asl" + action "iasl -p $(PWD)/dsdt -tc $(MAINBOARD)/dsdt.asl" + action "mv dsdt.hex dsdt.c" + end + object ./dsdt.o +end +if HAVE_MP_TABLE object mptable.o end +if HAVE_PIRQ_TABLE object irq_tables.o end +# object reset.o + +if USE_DCACHE_RAM + if CONFIG_USE_INIT + makerule ./cache_as_ram_auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@" + end + else + makerule ./cache_as_ram_auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" + end + end +end + +if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/entry16.inc + ldscript /cpu/x86/16bit/entry16.lds + mainboardinit southbridge/via/k8t890/romstrap.inc + ldscript /southbridge/via/k8t890/romstrap.lds +end + +mainboardinit cpu/x86/32bit/entry32.inc + +if USE_DCACHE_RAM + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end +end + +if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds +else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds +end + +if USE_DCACHE_RAM + mainboardinit cpu/amd/car/cache_as_ram.inc +end + +if USE_FALLBACK_IMAGE + if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover.lds + end +end + +if USE_DCACHE_RAM + if CONFIG_USE_INIT + initobject cache_as_ram_auto.o + else + mainboardinit ./cache_as_ram_auto.inc + end +end + +if CONFIG_CHIP_NAME + config chip.h +end + +chip northbridge/amd/amdk8/root_complex # Root complex + device apic_cluster 0 on # APIC cluster + chip cpu/amd/socket_AM2 # CPU + device apic 0 on end # APIC + end + end + device pci_domain 0 on # PCI domain + chip northbridge/amd/amdk8 # mc0 + device pci 18.0 on # Northbridge + # Devices on link 0, link 0 == LDT 0 + chip southbridge/via/vt8237r # Southbridge + register "ide0_enable" = "1" # Enable IDE channel 0 + register "ide1_enable" = "1" # Enable IDE channel 1 + register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0 + register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1 + register "fn_ctrl_lo" = "0xc0" # Enable SB functions + register "fn_ctrl_hi" = "0x1d" # Enable SB functions + device pci 0.0 on end # HT + device pci f.1 on end # IDE + device pci 11.0 on # LPC + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + chip superio/ite/it8712f # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # Environment controller + io 0x60 = 0x290 + io 0x62 = 0x230 + irq 0x70 = 0x00 + end + device pnp 2e.5 off end # PS/2 keyboard + device pnp 2e.6 off end # PS/2 mouse + device pnp 2e.7 off end # GPIO config + device pnp 2e.8 off end # Midi port + device pnp 2e.9 off end # Game port + device pnp 2e.a off end # IR + end + end + device pci 12.0 on end # VIA LAN + device pci 13.0 on end # br + device pci 13.1 on end # br2 need to have it here to discover it + end + chip southbridge/via/k8t890 # "Southbridge" K8M890 + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end diff --git a/src/mainboard/asus/m2v-mx_se/Options.lb b/src/mainboard/asus/m2v-mx_se/Options.lb new file mode 100644 index 0000000000..9b47ffc06c --- /dev/null +++ b/src/mainboard/asus/m2v-mx_se/Options.lb @@ -0,0 +1,168 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License v2 as published by +## the Free Software Foundation. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +uses HAVE_MP_TABLE +uses HAVE_PIRQ_TABLE +uses USE_FALLBACK_IMAGE +uses HAVE_FALLBACK_BOOT +uses HAVE_HARD_RESET +uses IRQ_SLOT_COUNT +uses HAVE_OPTION_TABLE +uses CONFIG_MAX_CPUS +uses CONFIG_MAX_PHYSICAL_CPUS +uses CONFIG_LOGICAL_CPUS +uses CONFIG_IOAPIC +uses CONFIG_SMP +uses FALLBACK_SIZE +uses ROM_SIZE +uses ROM_SECTION_SIZE +uses ROM_IMAGE_SIZE +uses ROM_SECTION_SIZE +uses ROM_SECTION_OFFSET +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START +uses PAYLOAD_SIZE +uses _ROMBASE +uses XIP_ROM_SIZE +uses XIP_ROM_BASE +uses STACK_SIZE +uses HEAP_SIZE +# uses USE_OPTION_TABLE +# uses CONFIG_LB_MEM_TOPK +uses HAVE_ACPI_TABLES +uses LB_CKS_RANGE_START +uses LB_CKS_RANGE_END +uses LB_CKS_LOC +uses MAINBOARD +uses MAINBOARD_PART_NUMBER +uses MAINBOARD_VENDOR +uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses COREBOOT_EXTRA_VERSION +uses _RAMBASE +uses CONFIG_GDB_STUB +uses CROSS_COMPILE +uses CC +uses HOSTCC +uses OBJCOPY +uses TTYS0_BAUD +uses TTYS0_BASE +uses TTYS0_LCS +uses DEFAULT_CONSOLE_LOGLEVEL +uses MAXIMUM_CONSOLE_LOGLEVEL +uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_CONSOLE_SERIAL8250 +uses HAVE_INIT_TIMER +uses CONFIG_GDB_STUB +uses CONFIG_CHIP_NAME +uses CONFIG_CONSOLE_VGA +uses CONFIG_PCI_ROM_RUN +# bx_b001- uses K8_HW_MEM_HOLE_SIZEK +uses K8_HT_FREQ_1G_SUPPORT +uses USE_DCACHE_RAM +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE +uses DCACHE_RAM_GLOBAL_VAR_SIZE +uses CONFIG_USE_INIT +uses ENABLE_APIC_EXT_ID +uses APIC_ID_OFFSET +uses LIFT_BSP_APIC_ID +uses HT_CHAIN_UNITID_BASE +uses HT_CHAIN_END_UNITID_BASE +# bx_b001- uses K8_SB_HT_CHAIN_ON_BUS0 +uses SB_HT_CHAIN_UNITID_OFFSET_ONLY +# bx_b005+ +uses SB_HT_CHAIN_ON_BUS0 +uses CONFIG_COMPRESSED_PAYLOAD_NRV2B +uses CONFIG_COMPRESSED_PAYLOAD_LZMA + +default ROM_SIZE = 512 * 1024 +default FALLBACK_SIZE = 256 * 1024 +default HAVE_FALLBACK_BOOT = 1 +default HAVE_HARD_RESET = 0 +default HAVE_PIRQ_TABLE = 0 +default IRQ_SLOT_COUNT = 11 # FIXME? +default HAVE_MP_TABLE = 1 +default HAVE_OPTION_TABLE = 0 # FIXME +# Move the default coreboot CMOS range off of AMD RTC registers. +default LB_CKS_RANGE_START = 49 +default LB_CKS_RANGE_END = 122 +default LB_CKS_LOC = 123 +default CONFIG_SMP = 1 +default CONFIG_MAX_CPUS = 2 +default CONFIG_MAX_PHYSICAL_CPUS = 1 +default CONFIG_LOGICAL_CPUS = 1 +default HAVE_ACPI_TABLES = 1 +# default CONFIG_CHIP_NAME = 1 + +# 1G memory hole +# bx_b001- default K8_HW_MEM_HOLE_SIZEK = 0x100000 + +# Opteron K8 1G HT support +default K8_HT_FREQ_1G_SUPPORT = 1 + +# HT Unit ID offset, default is 1, the typical one. +default HT_CHAIN_UNITID_BASE = 0x0 + +# Real SB Unit ID, default is 0x20, mean don't touch it at last. +# default HT_CHAIN_END_UNITID_BASE = 0x0 + +# Make the SB HT chain on bus 0, default is not (0). +# bx_b001- default K8_SB_HT_CHAIN_ON_BUS0 = 2 + +# bx_b005+ make the SB HT chain on bus 0. +default SB_HT_CHAIN_ON_BUS0 = 1 + +# Only offset for SB chain?, default is yes(1). +default SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0 + +default CONFIG_CONSOLE_VGA = 1 # Needed for VGA. +default CONFIG_PCI_ROM_RUN = 0 # Needed for VGA. +default USE_DCACHE_RAM = 1 +default DCACHE_RAM_BASE = 0xcc000 +default DCACHE_RAM_SIZE = 0x4000 +default DCACHE_RAM_GLOBAL_VAR_SIZE = 0x01000 +default CONFIG_USE_INIT = 0 +default ENABLE_APIC_EXT_ID = 0 +default APIC_ID_OFFSET = 0x10 +default LIFT_BSP_APIC_ID = 0 +default CONFIG_IOAPIC = 1 +default MAINBOARD_VENDOR = "ASUS" +default MAINBOARD_PART_NUMBER = "M2V-MX SE" +default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1043 +# default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID = 0x1234 # FIXME +default ROM_IMAGE_SIZE = 64 * 1024 +default STACK_SIZE = 8 * 1024 +default HEAP_SIZE = 256 * 1024 +# More 1M for pgtbl. +# default CONFIG_LB_MEM_TOPK = 2048 +default _RAMBASE = 0x00004000 +# default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE +default CONFIG_ROM_PAYLOAD = 1 +default CC = "$(CROSS_COMPILE)gcc -m32" +default HOSTCC = "gcc" +default CONFIG_GDB_STUB = 0 +default CONFIG_CONSOLE_SERIAL8250 = 1 +default TTYS0_BAUD = 115200 +default TTYS0_BASE = 0x3f8 +default TTYS0_LCS = 0x3 # 8n1 +default DEFAULT_CONSOLE_LOGLEVEL = 9 +default MAXIMUM_CONSOLE_LOGLEVEL = 9 +default MAINBOARD_POWER_ON_AFTER_POWER_FAIL = "MAINBOARD_POWER_ON" +end diff --git a/src/mainboard/asus/m2v-mx_se/acpi_tables.c b/src/mainboard/asus/m2v-mx_se/acpi_tables.c new file mode 100644 index 0000000000..86fee0c99a --- /dev/null +++ b/src/mainboard/asus/m2v-mx_se/acpi_tables.c @@ -0,0 +1,163 @@ +/* + * This file is part of the coreboot project. + * + * Written by Stefan Reinauer <stepan@openbios.org>. + * ACPI FADT, FACS, and DSDT table support added by + * + * Copyright (C) 2004 Stefan Reinauer <stepan@openbios.org> + * Copyright (C) 2005 Nick Barker <nick.barker9@btinternet.com> + * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License v2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci_ids.h> +#include <../../../southbridge/via/vt8237r/vt8237r.h> +#include <../../../southbridge/via/k8t890/k8t890.h> + +extern unsigned char AmlCode[]; + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + device_t dev; + struct resource *res; + + dev = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_K8T890CE_5, 0); + if (!dev) + return current; + + res = find_resource(dev, K8T890_MMCONFIG_MBAR); + if (res) { + current += acpi_create_mcfg_mmconfig((acpi_mcfg_mmconfig_t *) + current, res->base, 0x0, 0x0, 0xff); + } + return current; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + unsigned int gsi_base = 0x18; + + /* Create all subtables for processors. */ + current = acpi_create_madt_lapics(current); + + /* Write SB IOAPIC. */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + VT8237R_APIC_ID, VT8237R_APIC_BASE, 0); + + /* Write NB IOAPIC. */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + K8T890_APIC_ID, K8T890_APIC_BASE, gsi_base); + + /* IRQ9 ACPI active low. */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); + + /* IRQ0 -> APIC IRQ2. */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0x0); + + /* Create all subtables for processors. */ + current = acpi_create_madt_lapic_nmis(current, + MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); + + return current; +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_srat_t *srat; + acpi_rsdt_t *rsdt; + acpi_mcfg_t *mcfg; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *dsdt; + + /* Align ACPI tables to 16 byte. */ + start = (start + 0x0f) & -0x10; + current = start; + + printk_info("ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT table. */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* Clear all table memory. */ + memset((void *) start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt); + acpi_write_rsdt(rsdt); + + /* We explicitly add these tables later on: */ + printk_debug("ACPI: * FACS\n"); + facs = (acpi_facs_t *) current; + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + dsdt = (acpi_header_t *) current; + current += ((acpi_header_t *) AmlCode)->length; + memcpy((void *) dsdt, (void *) AmlCode, + ((acpi_header_t *) AmlCode)->length); + dsdt->checksum = 0; /* Don't trust iasl to get this right. */ + dsdt->checksum = acpi_checksum(dsdt, dsdt->length); + printk_debug("ACPI: * DSDT @ %08x Length %x\n", dsdt, + dsdt->length); + printk_debug("ACPI: * FADT\n"); + + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdt, fadt); + + printk_debug("ACPI: * HPET\n"); + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdt, hpet); + + /* If we want to use HPET timers Linux wants an MADT. */ + printk_debug("ACPI: * MADT\n"); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdt, madt); + + printk_debug("ACPI: * MCFG\n"); + mcfg = (acpi_mcfg_t *) current; + acpi_create_mcfg(mcfg); + current += mcfg->header.length; + acpi_add_table(rsdt, mcfg); + + printk_debug("ACPI: * SRAT\n"); + srat = (acpi_srat_t *) current; + acpi_create_srat(srat); + current += srat->header.length; + acpi_add_table(rsdt, srat); + + printk_info("ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/asus/m2v-mx_se/cache_as_ram_auto.c b/src/mainboard/asus/m2v-mx_se/cache_as_ram_auto.c new file mode 100644 index 0000000000..87248cb833 --- /dev/null +++ b/src/mainboard/asus/m2v-mx_se/cache_as_ram_auto.c @@ -0,0 +1,294 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 AMD + * (Written by Yinghai Lu <yinghailu@amd.com> for AMD) + * Copyright (C) 2006 MSI + * (Written by Bingxun Shi <bingxunshi@gmail.com> for MSI) + * Copyright (C) 2008 Rudolf Marek <r.marek@assembler.cz> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define ASSEMBLY 1 +#define __ROMCC__ + +#define RAMINIT_SYSINFO 1 + +#define CACHE_AS_RAM_ADDRESS_DEBUG 0 + +unsigned int get_sbdn(unsigned bus); + +/* Used by raminit. */ +#define QRANK_DIMM_SUPPORT 1 + +/* Used by init_cpus and fidvid */ +#define K8_SET_FIDVID 1 + +/* If we want to wait for core1 done before DQS training, set it to 0. */ +#define K8_SET_FIDVID_CORE0_ONLY 1 + +#if K8_REV_F_SUPPORT == 1 +#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 +#endif + +/* #define DEBUG_SMBUS 1 */ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/amd/mtrr.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include <cpu/amd/model_fxx_rev.h> +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" +#if CONFIG_USE_INIT == 0 +#include "lib/memcpy.c" +#endif +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "northbridge/amd/amdk8/early_ht.c" +#include "superio/ite/it8712f/it8712f_early_serial.c" +#include "southbridge/via/vt8237r/vt8237r_early_smbus.c" +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) +#define WATCHDOG_DEV PNP_DEV(0x2e, IT8712F_GPIO) + +static void memreset_setup(void) +{ +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#define K8_4RANK_DIMM_SUPPORT 1 + +#include "northbridge/amd/amdk8/amdk8.h" +#include "northbridge/amd/amdk8/raminit_f.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "sdram/generic_sdram.c" +#include "cpu/amd/dualcore/dualcore.c" +#include "southbridge/via/k8t890/k8t890_early_car.c" +#include "cpu/amd/car/copy_and_run.c" +#include "cpu/amd/car/post_cache_as_ram.c" +#include "cpu/amd/model_fxx/init_cpus.c" +#include "cpu/amd/model_fxx/fidvid.c" +#include "northbridge/amd/amdk8/resourcemap.c" + +void activate_spd_rom(const struct mem_controller *ctrl) +{ +} + +void hard_reset(void) +{ + print_info("NO HARD RESET. FIX ME!\n"); +} + +void soft_reset(void) +{ + uint8_t tmp; + + set_bios_reset(); + print_debug("soft reset \r\n"); + + /* PCI reset */ + tmp = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x4f); + tmp |= 0x01; + /* FIXME from S3 set bit1 to disable USB reset VT8237A/S */ + pci_write_config8(PCI_DEV(0, 0x11, 0), 0x4f, tmp); + + while (1) { + /* daisy daisy ... */ + hlt(); + } +} + +unsigned int get_sbdn(unsigned bus) +{ + device_t dev; + + dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_VT8237R_LPC), bus); + return (dev >> 15) & 0x1f; +} + +void sio_init(void) +{ + +} + +#if USE_FALLBACK_IMAGE == 1 + +void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) +{ + /* unsigned last_boot_normal_x = last_boot_normal(); */ + /* FIXME */ + unsigned last_boot_normal_x = 1; + + sio_init(); + it8712f_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + enable_rom_decode(); + + print_info("now booting... fallback\r\n"); + + /* Is this a CPU only reset? Or is this a secondary CPU? */ + if ((cpu_init_detectedx) || (!boot_cpu())) { + if (last_boot_normal_x) + goto normal_image; + else + goto fallback_image; + } + + /* Nothing special needs to be done to find bus 0. */ + /* Allow the HT devices to be found. */ + enumerate_ht_chain(); + + /* Is this a deliberate reset by the BIOS? */ + if (bios_reset_detected() && last_boot_normal_x) { + goto normal_image; + } + /* This is the primary CPU, how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } else { + goto fallback_image; + } + +normal_image: + /* print_info("JMP normal image\r\n"); */ + + __asm__ __volatile__("jmp __normal_image": + :"a" (bist), "b" (cpu_init_detectedx)); + +fallback_image: + ; +} +#endif + +void real_main(unsigned long bist, unsigned long cpu_init_detectedx); + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ +#if USE_FALLBACK_IMAGE == 1 + failover_process(bist, cpu_init_detectedx); +#endif + real_main(bist, cpu_init_detectedx); +} + +void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + msr_t msr; + static const uint16_t spd_addr[] = { + (0xa << 3) | 0, (0xa << 3) | 2, 0, 0, + (0xa << 3) | 1, (0xa << 3) | 3, 0, 0, +#if CONFIG_MAX_PHYSICAL_CPUS > 1 + (0xa << 3) | 4, (0xa << 3) | 6, 0, 0, + (0xa << 3) | 5, (0xa << 3) | 7, 0, 0, +#endif + }; + unsigned bsp_apicid = 0; + int needs_reset = 0; + struct sys_info *sysinfo = + (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); + char *p; + + sio_init(); + it8712f_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + enable_rom_decode(); + + print_info("now booting... real_main\r\n"); + + + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + + /* Halt if there was a built in self test failure. */ + report_bist_failure(bist); + setup_default_resource_map(); + setup_coherent_ht_domain(); + wait_all_core0_started(); + + print_info("now booting... Core0 started\r\n"); + +#if CONFIG_LOGICAL_CPUS==1 + /* It is said that we should start core1 after all core0 launched. */ + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); +#endif + init_timer(); + ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */ + + needs_reset = optimize_link_coherent_ht(); + print_debug_hex8(needs_reset); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + print_debug_hex8(needs_reset); + needs_reset |= k8t890_early_setup_ht(); + print_debug_hex8(needs_reset); + + vt8237_early_network_init(NULL); + vt8237_early_spi_init(); + + if (needs_reset) { + print_debug_hex8(needs_reset); + + print_debug("Xht reset -\r\n"); + soft_reset(); + print_debug("NO reset\r\n"); + + } + + + /* the HT settings needs to be OK, because link freq chnage may cause HT disconnect */ + /* allow LDT STOP asserts */ + vt8237_sb_enable_fid_vid(); + + enable_fid_change(); + print_debug("after enable_fid_change\r\n"); + + /* FIXME does not work yet */ +// init_fidvid_bsp(bsp_apicid); + + /* Stop the APs so we can start them later in init. */ + allow_all_aps_stop(bsp_apicid); + + /* It's the time to set ctrl now. */ + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + enable_smbus(); + memreset_setup(); + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + post_cache_as_ram(); +} diff --git a/src/mainboard/asus/m2v-mx_se/chip.h b/src/mainboard/asus/m2v-mx_se/chip.h new file mode 100644 index 0000000000..e2174e3948 --- /dev/null +++ b/src/mainboard/asus/m2v-mx_se/chip.h @@ -0,0 +1,23 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License v2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +extern struct chip_operations mainboard_asus_m2v_mx_se_ops; + +struct mainboard_asus_m2v_mx_se_config { +}; diff --git a/src/mainboard/asus/m2v-mx_se/cmos.layout b/src/mainboard/asus/m2v-mx_se/cmos.layout new file mode 100644 index 0000000000..ecf89a9b5d --- /dev/null +++ b/src/mainboard/asus/m2v-mx_se/cmos.layout @@ -0,0 +1,98 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 dual_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 reserved_memory + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 DDR400 +8 1 DDR333 +8 2 DDR266 +8 3 DDR200 +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 + + diff --git a/src/mainboard/asus/m2v-mx_se/dsdt.asl b/src/mainboard/asus/m2v-mx_se/dsdt.asl new file mode 100644 index 0000000000..ac32980531 --- /dev/null +++ b/src/mainboard/asus/m2v-mx_se/dsdt.asl @@ -0,0 +1,191 @@ +/* + * This file is part of the coreboot project. + * + * (C) Copyright 2004 Nick Barker <Nick.Barker9@btinternet.com> + * (C) Copyright 2007, 2008 Rudolf Marek <r.marek@assembler.cz> + * + * ISA portions taken from QEMU acpi-dsdt.dsl. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License v2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +DefinitionBlock ("DSDT.aml", "DSDT", 1, "LXBIOS", "LXB-DSDT", 1) +{ + /* Define the main processor.*/ + Scope (\_PR) + { + Processor (\_PR.CPU0, 0x00, 0x000000, 0x00) {} + Processor (\_PR.CPU1, 0x01, 0x000000, 0x00) {} + } + + /* For now only define 2 power states: + * - S0 which is fully on + * - S5 which is soft off + * Any others would involve declaring the wake up methods. + */ + Name (\_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) + Name (\_S5, Package () { 0x02, 0x02, 0x00, 0x00 }) + + /* Root of the bus hierarchy */ + Scope (\_SB) + { + /* Top PCI device */ + Device (PCI0) + { + Name (_HID, EisaId ("PNP0A03")) + Name (_ADR, 0x00) + Name (_UID, 0x00) + Name (_BBN, 0x00) + + /* PCI Routing Table */ + /* aaa */ + Name (_PRT, Package () { + Package (0x04) { 0x000F0000, 0x01, 0x00, 0x15 }, /* 0xf SATA IRQ 21 */ + Package (0x04) { 0x000F0001, 0x00, 0x00, 0x14 }, /* 0xf Native IDE IRQ 20 */ + Package (0x04) { 0x0010FFFF, 0x00, 0x00, 0x15 }, /* USB routing */ + Package (0x04) { 0x0010FFFF, 0x01, 0x00, 0x15 }, + Package (0x04) { 0x0010FFFF, 0x02, 0x00, 0x15 }, + Package (0x04) { 0x0010FFFF, 0x03, 0x00, 0x15 }, + Package (0x04) { 0x0012FFFF, 0x00, 0x00, 0x17 }, /* LAN */ + Package (0x04) { 0x0013FFFF, 0x00, 0x00, 0x14 }, /* PCIe bridge SB */ + Package (0x04) { 0x0013FFFF, 0x02, 0x00, 0x16 }, /* PCIe bridge SB */ + Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x10 }, /* AGP pridge */ + Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x11 }, /* FIXME FIXME */ + Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x1B }, /* PCIE16 bridge IRQ27 */ + Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x1B }, + Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x1B }, + Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x1B }, + Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x1F }, /* PCIE bridge IRQ31 */ + Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x23 }, /* IRQ36 */ + Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x27 }, /* IRQ39 */ + Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x2B } /* IRQ43 */ + }) + + Device (PEGG) + { + Name (_ADR, 0x00020000) + Name (_UID, 0x00) + Name (_BBN, 0x02) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x18 }, /* PCIE IRQ24-IRQ27 */ + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x19 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1A }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1B }, + }) + } + + Device (PEX0) + { + Name (_ADR, 0x00030000) + Name (_UID, 0x00) + Name (_BBN, 0x03) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x1C }, /* PCIE IRQ28-IRQ31 */ + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x1D }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1E }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1F }, + }) + } + + Device (PEX1) + { + Name (_ADR, 0x00130000) + Name (_UID, 0x00) + Name (_BBN, 0x4) + Name (_PRT, Package () { + Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x11 }, /* PCIE audio */ + Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x11 }, + Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x11 }, + Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x11 }, + }) + } + + Device (TBRG) + { + Name (_ADR, 0x00130001) + Name (_UID, 0x00) + Name (_BBN, 0x5) + Name (_PRT, Package () { + Package (0x04) { 0x0006FFFF, 0x00, 0x00, 0x10 }, /* PCI slot */ + Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x11 }, + Package (0x04) { 0x0006FFFF, 0x02, 0x00, 0x12 }, + Package (0x04) { 0x0006FFFF, 0x03, 0x00, 0x13 }, + Package (0x04) { 0x0007FFFF, 0x00, 0x00, 0x11 }, /* PCI slot */ + Package (0x04) { 0x0007FFFF, 0x01, 0x00, 0x12 }, + Package (0x04) { 0x0007FFFF, 0x02, 0x00, 0x13 }, + Package (0x04) { 0x0007FFFF, 0x03, 0x00, 0x10 }, + }) + } + Device (ISA) { + Name (_ADR, 0x00110000) + + /* PS/2 keyboard (seems to be important for WinXP install) */ + Device (KBD) + { + Name (_HID, EisaId ("PNP0303")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (TMP, ResourceTemplate () { + IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) + IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) + IRQNoFlags () {1} + }) + Return (TMP) + } + } + + /* PS/2 mouse */ + Device (MOU) + { + Name (_HID, EisaId ("PNP0F13")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (TMP, ResourceTemplate () { + IRQNoFlags () {12} + }) + Return (TMP) + } + } + + /* PS/2 floppy controller */ + Device (FDC0) + { + Name (_HID, EisaId ("PNP0700")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (BUF0, ResourceTemplate () { + IO (Decode16, 0x03F2, 0x03F2, 0x00, 0x04) + IO (Decode16, 0x03F7, 0x03F7, 0x00, 0x01) + IRQNoFlags () {6} + DMA (Compatibility, NotBusMaster, Transfer8) {2} + }) + Return (BUF0) + } + } + } + } + } +} diff --git a/src/mainboard/asus/m2v-mx_se/fadt.c b/src/mainboard/asus/m2v-mx_se/fadt.c new file mode 100644 index 0000000000..f77601a022 --- /dev/null +++ b/src/mainboard/asus/m2v-mx_se/fadt.c @@ -0,0 +1,153 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2004 Nick Barker <nick.barker9@btinternet.com> + * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <arch/acpi.h> +#include <../../../southbridge/via/vt8237r/vt8237r.h> + +/** + * Create the Fixed ACPI Description Tables (FADT) for this board. + */ +void acpi_create_fadt(acpi_fadt_t *fadt, acpi_facs_t *facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + + memset((void *) fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = 244; + header->revision = 1; + memcpy(header->oem_id, "COREBO", 6); + memcpy(header->oem_table_id, "COREBOOT", 8); + memcpy(header->asl_compiler_id, "IASL", 4); + header->asl_compiler_revision = 0; + + fadt->firmware_ctrl = facs; + fadt->dsdt = dsdt; + fadt->preferred_pm_profile = 0; + fadt->sci_int = 9; + fadt->smi_cmd = 0; + fadt->acpi_enable = 0; + fadt->acpi_disable = 0; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = 0x0; + + fadt->pm1a_evt_blk = VT8237R_ACPI_IO_BASE; + fadt->pm1b_evt_blk = 0x0; + fadt->pm1a_cnt_blk = VT8237R_ACPI_IO_BASE + 0x4; + fadt->pm1b_cnt_blk = 0x0; + fadt->pm2_cnt_blk = 0x0; + fadt->pm_tmr_blk = VT8237R_ACPI_IO_BASE + 0x8; + fadt->gpe0_blk = VT8237R_ACPI_IO_BASE + 0x20; + fadt->gpe1_blk = 0x0; + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + fadt->pm2_cnt_len = 0; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 4; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + fadt->cst_cnt = 0; + fadt->p_lvl2_lat = 90; + fadt->p_lvl3_lat = 900; + fadt->flush_size = 0; + fadt->flush_stride = 0; + fadt->duty_offset = 0; + fadt->duty_width = 1; //?? + fadt->day_alrm = 0x7d; + fadt->mon_alrm = 0x7e; + fadt->century = 0x32; + /* fixme 5 - 10 */ + fadt->iapc_boot_arch = 0x1; + /* fixme */ + fadt->flags = 0x4a5; + + fadt->reset_reg.space_id = 0; + fadt->reset_reg.bit_width = 0; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0x0; + fadt->reset_reg.addrh = 0x0; + + fadt->reset_value = 0; + fadt->x_firmware_ctl_l = facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 4; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = VT8237R_ACPI_IO_BASE; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 1; + fadt->x_pm1b_evt_blk.bit_width = 4; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 2; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = VT8237R_ACPI_IO_BASE + 0x4; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 1; + fadt->x_pm1b_cnt_blk.bit_width = 2; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 0; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = 0x0; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 4; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = VT8237R_ACPI_IO_BASE + 0x8; + fadt->x_pm_tmr_blk.addrh = 0x0; + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 0; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = VT8237R_ACPI_IO_BASE + 0x20; + fadt->x_gpe0_blk.addrh = 0x0; + + fadt->x_gpe1_blk.space_id = 1; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0x0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = acpi_checksum((void *) fadt, sizeof(acpi_fadt_t)); +} diff --git a/src/mainboard/asus/m2v-mx_se/mainboard.c b/src/mainboard/asus/m2v-mx_se/mainboard.c new file mode 100644 index 0000000000..f46109b561 --- /dev/null +++ b/src/mainboard/asus/m2v-mx_se/mainboard.c @@ -0,0 +1,30 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License v2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include "chip.h" + +#if CONFIG_CHIP_NAME == 1 +struct chip_operations mainboard_asus_m2v_se_ops = { + CHIP_NAME("ASUS M2V-MX SE Mainboard") +}; +#endif diff --git a/src/mainboard/asus/m2v-mx_se/mptable.c b/src/mainboard/asus/m2v-mx_se/mptable.c new file mode 100644 index 0000000000..5303672bf0 --- /dev/null +++ b/src/mainboard/asus/m2v-mx_se/mptable.c @@ -0,0 +1,32 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Rudolf Marek <r.marek@assembler.cz> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License v2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <stdint.h> +#include <arch/smp/mpspec.h> +#include <../../../southbridge/via/vt8237r/vt8237r.h> +#include <../../../southbridge/via/k8t890/k8t890.h> + +unsigned long write_smp_table(unsigned long addr) +{ + /* place holder for a table, need to have it defined because + of MP_ used by ACPI */ + + return addr; +} |