summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/cpu/samsung/exynos5420/spi.c115
1 files changed, 56 insertions, 59 deletions
diff --git a/src/cpu/samsung/exynos5420/spi.c b/src/cpu/samsung/exynos5420/spi.c
index dddbec5dfc..906f6a7afa 100644
--- a/src/cpu/samsung/exynos5420/spi.c
+++ b/src/cpu/samsung/exynos5420/spi.c
@@ -153,10 +153,8 @@ static void exynos_spi_request_bytes(struct exynos_spi *regs, int count,
}
}
-int spi_rx_tx(struct spi_slave *slave, uint8_t *rxp, int rx_bytes,
- const uint8_t *txp, int tx_bytes);
-int spi_rx_tx(struct spi_slave *slave, uint8_t *rxp, int rx_bytes,
- const uint8_t *txp, int tx_bytes)
+static int spi_rx_tx(struct spi_slave *slave, uint8_t *rxp, int rx_bytes,
+ const uint8_t *txp, int tx_bytes)
{
struct exynos_spi_slave *espi = to_exynos_spi(slave);
struct exynos_spi *regs = espi->regs;
@@ -237,46 +235,6 @@ int spi_rx_tx(struct spi_slave *slave, uint8_t *rxp, int rx_bytes,
return 0;
}
-static void exynos_spi_rx_tx(struct exynos_spi *regs, int todo,
- void *dinp, void const *doutp, int i)
-{
- int rx_lvl, tx_lvl;
- unsigned int *rxp = (unsigned int *)(dinp + (i * (32 * 1024)));
- unsigned int out_bytes, in_bytes;
-
- // TODO In currrent implementation, every read/write must be aligned to
- // 4 bytes, otherwise you may get timeout or other unexpected results.
- ASSERT(todo % 4 == 0);
-
- out_bytes = in_bytes = todo;
- exynos_spi_soft_reset(regs);
- writel(((todo * 8) / 32) | SPI_PACKET_CNT_EN, &regs->pkt_cnt);
-
- while (in_bytes) {
- uint32_t spi_sts;
- int temp;
-
- spi_sts = readl(&regs->spi_sts);
- rx_lvl = ((spi_sts >> 15) & 0x7f);
- tx_lvl = ((spi_sts >> 6) & 0x7f);
- while (tx_lvl < 32 && out_bytes) {
- // TODO The "writing" (tx) is not supported now; that's
- // why we write garbage to keep driving FIFO clock.
- temp = 0xffffffff;
- writel(temp, &regs->tx_data);
- out_bytes -= 4;
- tx_lvl += 4;
- }
- while (rx_lvl >= 4 && in_bytes) {
- temp = readl(&regs->rx_data);
- if (rxp)
- *rxp++ = temp;
- in_bytes -= 4;
- rx_lvl -= 4;
- }
- }
-}
-
int spi_claim_bus(struct spi_slave *slave)
{
struct exynos_spi_slave *espi = to_exynos_spi(slave);
@@ -304,32 +262,70 @@ int spi_claim_bus(struct spi_slave *slave)
int spi_xfer(struct spi_slave *slave, const void *dout, unsigned int bitsout,
void *din, unsigned int bitsin)
{
- // TODO(hungte) Invoke exynos_spi_rx_tx to transfer data.
- return -1;
+ unsigned int out_bytes = bitsout / 8, in_bytes = bitsin / 8;
+ uint8_t *out_ptr = (uint8_t *)dout, *in_ptr = (uint8_t *)din;
+ int offset, todo, len;
+ int ret = 0;
+
+ ASSERT(bitsout % 8 == 0 && bitsin % 8 == 0);
+ len = MAX(out_bytes, in_bytes);
+
+ /*
+ * Exynos SPI limits each transfer to (2^16-1=65535) bytes. To keep
+ * things simple (especially for word-width transfer mode), allow a
+ * maximum of (2^16-4=65532) bytes. We could allow more in word mode,
+ * but the performance difference is small.
+ */
+ spi_cs_activate(slave);
+ for (offset = 0; !ret && (offset < len); offset += todo) {
+ todo = min(len - offset, (1 << 16) - 4);
+ ret = spi_rx_tx(slave, in_ptr, MIN(in_bytes, todo), out_ptr,
+ MIN(out_bytes, todo));
+ // Adjust remaining bytes and pointers.
+ if (in_bytes >= todo) {
+ in_bytes -= todo;
+ in_ptr += todo;
+ } else {
+ in_bytes = 0;
+ in_ptr = NULL;
+ }
+ if (out_bytes >= todo) {
+ out_bytes -= todo;
+ out_ptr += todo;
+ } else {
+ out_bytes = 0;
+ out_ptr = NULL;
+ }
+ }
+ spi_cs_deactivate(slave);
+
+ return ret;
}
static int exynos_spi_read(struct spi_slave *slave, void *dest, uint32_t len,
uint32_t off)
{
struct exynos_spi *regs = to_exynos_spi(slave)->regs;
- int upto, todo;
- int i;
- clrbits_le32(&regs->cs_reg, SPI_SLAVE_SIG_INACT); /* CS low */
+ int rv;
- /* Send read instruction (0x3h) followed by a 24 bit addr */
- writel((SF_READ_DATA_CMD << 24) | off, &regs->tx_data);
+ // TODO(hungte) Merge the "read address" command into spi_xfer calls
+ // (full-duplex mode).
- /* waiting for TX done */
- while (!(readl(&regs->spi_sts) & SPI_ST_TX_DONE));
+ spi_cs_activate(slave);
- for (upto = 0, i = 0; upto < len; upto += todo, i++) {
- todo = MIN(len - upto, (1 << 15));
- exynos_spi_rx_tx(regs, todo, dest, (void *)(off), i);
+ // Specify read address (in word-width mode).
+ ASSERT(off < (1 << 24));
+ exynos_spi_request_bytes(regs, sizeof(off), sizeof(off));
+ writel(htonl((SF_READ_DATA_CMD << 24) | off), &regs->tx_data);
+ while (!(readl(&regs->spi_sts) & SPI_ST_TX_DONE)) {
+ /* Wait for TX done */
}
- setbits_le32(&regs->cs_reg, SPI_SLAVE_SIG_INACT);/* make the CS high */
+ // Now, safe to transfer.
+ rv = spi_xfer(slave, NULL, 0, dest, len * 8);
+ spi_cs_deactivate(slave);
- return len;
+ return (rv == 0) ? len : -1;
}
void spi_release_bus(struct spi_slave *slave)
@@ -378,7 +374,8 @@ static void *exynos_spi_cbfs_map(struct cbfs_media *media, size_t offset,
size_t count) {
struct exynos_spi_media *spi = (struct exynos_spi_media*)media->context;
DEBUG_SPI("exynos_spi_cbfs_map\n");
- // See exynos_spi_rx_tx for I/O alignment limitation.
+ // exynos: spi_rx_tx may work in 4 byte-width-transmission mode and
+ // requires buffer memory address to be aligned.
if (count % 4)
count += 4 - (count % 4);
return cbfs_simple_buffer_map(&spi->buffer, media, offset, count);