diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/devices/pci_device.c | 2 | ||||
| -rw-r--r-- | src/mainboard/olpc/rev_a/Config.lb | 9 | ||||
| -rw-r--r-- | src/mainboard/olpc/rev_a/mainboard.c | 4 | ||||
| -rw-r--r-- | src/southbridge/amd/cs5536/chip.h | 8 | ||||
| -rw-r--r-- | src/southbridge/amd/cs5536/cs5536.c | 24 |
5 files changed, 43 insertions, 4 deletions
diff --git a/src/devices/pci_device.c b/src/devices/pci_device.c index f89f5bbbda..9451ea35aa 100644 --- a/src/devices/pci_device.c +++ b/src/devices/pci_device.c @@ -1161,7 +1161,7 @@ unsigned int pci_scan_bridge(struct device *dev, unsigned int max) Tell the EISA int controller this int must be level triggered THIS IS A KLUDGE -- sorry, this needs to get cleaned up. */ -static void pci_level_irq(unsigned char intNum) +void pci_level_irq(unsigned char intNum) { unsigned short intBits = inb(0x4d0) | (((unsigned) inb(0x4d1)) << 8); diff --git a/src/mainboard/olpc/rev_a/Config.lb b/src/mainboard/olpc/rev_a/Config.lb index e0e2613b30..0cc42811d0 100644 --- a/src/mainboard/olpc/rev_a/Config.lb +++ b/src/mainboard/olpc/rev_a/Config.lb @@ -135,8 +135,13 @@ chip northbridge/amd/gx2 device pci 1.1 on end chip southbridge/amd/cs5536 register "enable_gpio0_inta" = "1" - register "enable_ide_nand_flash" = "1" - register "enable_uarta" = "1" + register "enable_ide_nand_flash" = "1" + register "enable_uarta" = "1" + register "audio_irq" = "5" + register "usbf4_irq" = "10" + register "usbf5_irq" = "0" + register "usbf6_irq" = "0" + register "usbf7_irq" = "0" device pci d.0 on end # Realtek 8139 LAN device pci f.0 on end # ISA Bridge device pci f.2 on end # IDE Controller diff --git a/src/mainboard/olpc/rev_a/mainboard.c b/src/mainboard/olpc/rev_a/mainboard.c index b4e7eba93f..80d01586c8 100644 --- a/src/mainboard/olpc/rev_a/mainboard.c +++ b/src/mainboard/olpc/rev_a/mainboard.c @@ -9,13 +9,16 @@ static void init(struct device *dev) { +/* unsigned bus = 0; unsigned devfn = PCI_DEVFN(0xf, 4); device_t usb = NULL; unsigned char usbirq = 0xa; +*/ printk_debug("OLPC REVA ENTER %s\n", __FUNCTION__); +#if 0 /* I can't think of any reason NOT to just set this. If it turns out we want this to be * conditional we can make it a config variable later. */ @@ -28,6 +31,7 @@ static void init(struct device *dev) { } else { pci_write_config8(usb, PCI_INTERRUPT_LINE, usbirq); } +#endif printk_debug("OLPC REVA EXIT %s\n", __FUNCTION__); } diff --git a/src/southbridge/amd/cs5536/chip.h b/src/southbridge/amd/cs5536/chip.h index 33cc78a2f1..c186ff31d7 100644 --- a/src/southbridge/amd/cs5536/chip.h +++ b/src/southbridge/amd/cs5536/chip.h @@ -10,6 +10,14 @@ struct southbridge_amd_cs5536_config { int enable_gpio0_inta; /* almost always will be true */ int enable_ide_nand_flash; /* if you are using nand flash instead of IDE drive */ int enable_uarta; /* internal uarta interrupt enable */ + /* following are IRQ numbers for various southbridge resources. */ + /* I have guessed at some things, as I still don't have an lspci from anyone */ + int ide_irq; /* f.2 */ + int audio_irq; /* f.3 */ + int usbf4_irq; /* f.4 */ + int usbf5_irq; /* f.5 */ + int usbf6_irq; /* f.6 */ + int usbf7_irq; /* f.7 */ }; #endif /* _SOUTHBRIDGE_AMD_CS5536 */ diff --git a/src/southbridge/amd/cs5536/cs5536.c b/src/southbridge/amd/cs5536/cs5536.c index 062ba5a0f0..b67211fa0d 100644 --- a/src/southbridge/amd/cs5536/cs5536.c +++ b/src/southbridge/amd/cs5536/cs5536.c @@ -63,6 +63,21 @@ enable_ide_nand_flash(){ printk_err("cs5536: EXIT %s\n", __FUNCTION__); } +/* note: this is a candidate for inclusion in src/devices/pci_device.c */ +void +setup_irq(unsigned irq, char *name, unsigned level, unsigned bus, unsigned device, unsigned fn){ + if (irq) { + unsigned devfn = PCI_DEVFN(device,fn); + device_t dev = dev_find_slot(bus, devfn); + if (dev) { + pci_write_config8(dev, PCI_INTERRUPT_LINE, irq); + if (level) + pci_level_irq(irq); + } + else + printk_err("%s: Can't find %s at 0x%x\n", __FUNCTION__, name, devfn); + } +} static void southbridge_enable(struct device *dev) { @@ -109,7 +124,14 @@ static void southbridge_enable(struct device *dev) printk_err("%s: enable_ide_nand_flash is %d\n", __FUNCTION__, sb->enable_ide_nand_flash); if (sb->enable_ide_nand_flash) { enable_ide_nand_flash(); - } + } + + /* irq handling */ + setup_irq(sb->audio_irq, "audio", 1, 0, 0xf, 2); + setup_irq(sb->usbf4_irq, "usb f4", 1, 0, 0xf, 4); + setup_irq(sb->usbf5_irq, "usb f5", 1, 0, 0xf, 5); + setup_irq(sb->usbf6_irq, "usb f6", 1, 0, 0xf, 6); + setup_irq(sb->usbf7_irq, "usb f7", 1, 0, 0xf, 7); } |