summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/arch/ppc/include/ppc4xx.h415
-rw-r--r--src/cpu/ppc/ppc4xx/Config.lb9
-rw-r--r--src/cpu/ppc/ppc4xx/clock.c173
-rw-r--r--src/cpu/ppc/ppc4xx/mem.c7
-rw-r--r--src/cpu/ppc/ppc4xx/ppc4xx.inc750
5 files changed, 1354 insertions, 0 deletions
diff --git a/src/arch/ppc/include/ppc4xx.h b/src/arch/ppc/include/ppc4xx.h
new file mode 100644
index 0000000000..5d5c979970
--- /dev/null
+++ b/src/arch/ppc/include/ppc4xx.h
@@ -0,0 +1,415 @@
+/*----------------------------------------------------------------------------+
+|
+| This source code has been made available to you by IBM on an AS-IS
+| basis. Anyone receiving this source is licensed under IBM
+| copyrights to use it in any way he or she deems fit, including
+| copying it, modifying it, compiling it, and redistributing it either
+| with or without modifications. No license under IBM patents or
+| patent applications is to be implied by the copyright license.
+|
+| Any user of this software should understand that IBM cannot provide
+| technical support for this software and will not be responsible for
+| any consequences resulting from the use of this software.
+|
+| Any person who transfers this source code or any derivative work
+| must include the IBM copyright notice, this paragraph, and the
+| preceding two paragraphs in the transferred software.
+|
+| COPYRIGHT I B M CORPORATION 1999
+| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
++----------------------------------------------------------------------------*/
+
+#ifndef __PPC4XX_H__
+#define __PPC4XX_H__
+
+/*--------------------------------------------------------------------- */
+/* Special Purpose Registers */
+/*--------------------------------------------------------------------- */
+ #define srr2 0x3de /* save/restore register 2 */
+ #define srr3 0x3df /* save/restore register 3 */
+ #define dbsr 0x3f0 /* debug status register */
+ #define dbcr0 0x3f2 /* debug control register 0 */
+ #define dbcr1 0x3bd /* debug control register 1 */
+ #define iac1 0x3f4 /* instruction address comparator 1 */
+ #define iac2 0x3f5 /* instruction address comparator 2 */
+ #define iac3 0x3b4 /* instruction address comparator 3 */
+ #define iac4 0x3b5 /* instruction address comparator 4 */
+ #define dac1 0x3f6 /* data address comparator 1 */
+ #define dac2 0x3f7 /* data address comparator 2 */
+ #define dccr 0x3fa /* data cache control register */
+ #define iccr 0x3fb /* instruction cache control register */
+ #define esr 0x3d4 /* execption syndrome register */
+ #define dear 0x3d5 /* data exeption address register */
+ #define evpr 0x3d6 /* exeption vector prefix register */
+ #define tsr 0x3d8 /* timer status register */
+ #define tcr 0x3da /* timer control register */
+ #define pit 0x3db /* programmable interval timer */
+ #define sgr 0x3b9 /* storage guarded reg */
+ #define dcwr 0x3ba /* data cache write-thru reg*/
+ #define sler 0x3bb /* storage little-endian reg */
+ #define cdbcr 0x3d7 /* cache debug cntrl reg */
+ #define icdbdr 0x3d3 /* instr cache dbug data reg*/
+ #define ccr0 0x3b3 /* core configuration register */
+ #define dvc1 0x3b6 /* data value compare register 1 */
+ #define dvc2 0x3b7 /* data value compare register 2 */
+ #define pid 0x3b1 /* process ID */
+ #define su0r 0x3bc /* storage user-defined register 0 */
+ #define zpr 0x3b0 /* zone protection regsiter */
+
+ #define tbl 0x11c /* time base lower - privileged write */
+ #define tbu 0x11d /* time base upper - privileged write */
+
+ #define sprg4r 0x104 /* Special purpose general 4 - read only */
+ #define sprg5r 0x105 /* Special purpose general 5 - read only */
+ #define sprg6r 0x106 /* Special purpose general 6 - read only */
+ #define sprg7r 0x107 /* Special purpose general 7 - read only */
+ #define sprg4w 0x114 /* Special purpose general 4 - write only */
+ #define sprg5w 0x115 /* Special purpose general 5 - write only */
+ #define sprg6w 0x116 /* Special purpose general 6 - write only */
+ #define sprg7w 0x117 /* Special purpose general 7 - write only */
+
+/******************************************************************************
+ * Special for PPC405GP
+ ******************************************************************************/
+
+/******************************************************************************
+ * DMA
+ ******************************************************************************/
+#define DMA_DCR_BASE 0x100
+#define dmacr0 (DMA_DCR_BASE+0x00) /* DMA channel control register 0 */
+#define dmact0 (DMA_DCR_BASE+0x01) /* DMA count register 0 */
+#define dmada0 (DMA_DCR_BASE+0x02) /* DMA destination address register 0 */
+#define dmasa0 (DMA_DCR_BASE+0x03) /* DMA source address register 0 */
+#define dmasb0 (DMA_DCR_BASE+0x04) /* DMA scatter/gather descriptor addr 0 */
+#define dmacr1 (DMA_DCR_BASE+0x08) /* DMA channel control register 1 */
+#define dmact1 (DMA_DCR_BASE+0x09) /* DMA count register 1 */
+#define dmada1 (DMA_DCR_BASE+0x0a) /* DMA destination address register 1 */
+#define dmasa1 (DMA_DCR_BASE+0x0b) /* DMA source address register 1 */
+#define dmasb1 (DMA_DCR_BASE+0x0c) /* DMA scatter/gather descriptor addr 1 */
+#define dmacr2 (DMA_DCR_BASE+0x10) /* DMA channel control register 2 */
+#define dmact2 (DMA_DCR_BASE+0x11) /* DMA count register 2 */
+#define dmada2 (DMA_DCR_BASE+0x12) /* DMA destination address register 2 */
+#define dmasa2 (DMA_DCR_BASE+0x13) /* DMA source address register 2 */
+#define dmasb2 (DMA_DCR_BASE+0x14) /* DMA scatter/gather descriptor addr 2 */
+#define dmacr3 (DMA_DCR_BASE+0x18) /* DMA channel control register 3 */
+#define dmact3 (DMA_DCR_BASE+0x19) /* DMA count register 3 */
+#define dmada3 (DMA_DCR_BASE+0x1a) /* DMA destination address register 3 */
+#define dmasa3 (DMA_DCR_BASE+0x1b) /* DMA source address register 3 */
+#define dmasb3 (DMA_DCR_BASE+0x1c) /* DMA scatter/gather descriptor addr 3 */
+#define dmasr (DMA_DCR_BASE+0x20) /* DMA status register */
+#define dmasgc (DMA_DCR_BASE+0x23) /* DMA scatter/gather command register */
+#define dmaadr (DMA_DCR_BASE+0x24) /* DMA address decode register */
+
+/******************************************************************************
+ * Universal interrupt controller
+ ******************************************************************************/
+#define UIC_DCR_BASE 0xc0
+#define uicsr (UIC_DCR_BASE+0x0) /* UIC status */
+#define uicsrs (UIC_DCR_BASE+0x1) /* UIC status set */
+#define uicer (UIC_DCR_BASE+0x2) /* UIC enable */
+#define uiccr (UIC_DCR_BASE+0x3) /* UIC critical */
+#define uicpr (UIC_DCR_BASE+0x4) /* UIC polarity */
+#define uictr (UIC_DCR_BASE+0x5) /* UIC triggering */
+#define uicmsr (UIC_DCR_BASE+0x6) /* UIC masked status */
+#define uicvr (UIC_DCR_BASE+0x7) /* UIC vector */
+#define uicvcr (UIC_DCR_BASE+0x8) /* UIC vector configuration */
+
+/*-----------------------------------------------------------------------------+
+| Universal interrupt controller interrupts
++-----------------------------------------------------------------------------*/
+#define UIC_UART0 0x80000000 /* UART 0 */
+#define UIC_UART1 0x40000000 /* UART 1 */
+#define UIC_IIC 0x20000000 /* IIC */
+#define UIC_EXT_MAST 0x10000000 /* External Master */
+#define UIC_PCI 0x08000000 /* PCI write to command reg */
+#define UIC_DMA0 0x04000000 /* DMA chan. 0 */
+#define UIC_DMA1 0x02000000 /* DMA chan. 1 */
+#define UIC_DMA2 0x01000000 /* DMA chan. 2 */
+#define UIC_DMA3 0x00800000 /* DMA chan. 3 */
+#define UIC_EMAC_WAKE 0x00400000 /* EMAC wake up */
+#define UIC_MAL_SERR 0x00200000 /* MAL SERR */
+#define UIC_MAL_TXEOB 0x00100000 /* MAL TXEOB */
+#define UIC_MAL_RXEOB 0x00080000 /* MAL RXEOB */
+#define UIC_MAL_TXDE 0x00040000 /* MAL TXDE */
+#define UIC_MAL_RXDE 0x00020000 /* MAL RXDE */
+#define UIC_ENET 0x00010000 /* Ethernet */
+#define UIC_EXT_PCI_SERR 0x00008000 /* External PCI SERR# */
+#define UIC_ECC_CE 0x00004000 /* ECC Correctable Error */
+#define UIC_PCI_PM 0x00002000 /* PCI Power Management */
+#define UIC_EXT0 0x00000040 /* External interrupt 0 */
+#define UIC_EXT1 0x00000020 /* External interrupt 1 */
+#define UIC_EXT2 0x00000010 /* External interrupt 2 */
+#define UIC_EXT3 0x00000008 /* External interrupt 3 */
+#define UIC_EXT4 0x00000004 /* External interrupt 4 */
+#define UIC_EXT5 0x00000002 /* External interrupt 5 */
+#define UIC_EXT6 0x00000001 /* External interrupt 6 */
+
+/******************************************************************************
+ * SDRAM Controller
+ ******************************************************************************/
+#define SDRAM_DCR_BASE 0x10
+#define memcfga (SDRAM_DCR_BASE+0x0) /* Memory configuration address reg */
+#define memcfgd (SDRAM_DCR_BASE+0x1) /* Memory configuration data reg */
+ /* values for memcfga register - indirect addressing of these regs */
+#ifndef CONFIG_405EP
+ #define mem_besra 0x00 /* bus error syndrome reg a */
+ #define mem_besrsa 0x04 /* bus error syndrome reg set a */
+ #define mem_besrb 0x08 /* bus error syndrome reg b */
+ #define mem_besrsb 0x0c /* bus error syndrome reg set b */
+ #define mem_bear 0x10 /* bus error address reg */
+#endif
+ #define mem_mcopt1 0x20 /* memory controller options 1 */
+ #define mem_rtr 0x30 /* refresh timer reg */
+ #define mem_pmit 0x34 /* power management idle timer */
+ #define mem_mb0cf 0x40 /* memory bank 0 configuration */
+ #define mem_mb1cf 0x44 /* memory bank 1 configuration */
+ #define mem_mb2cf 0x48 /* memory bank 2 configuration */
+ #define mem_mb3cf 0x4c /* memory bank 3 configuration */
+ #define mem_sdtr1 0x80 /* timing reg 1 */
+#ifndef CONFIG_405EP
+ #define mem_ecccf 0x94 /* ECC configuration */
+ #define mem_eccerr 0x98 /* ECC error status */
+#endif
+
+/******************************************************************************
+ * Decompression Controller
+ ******************************************************************************/
+#define DECOMP_DCR_BASE 0x14
+#define kiar (DECOMP_DCR_BASE+0x0) /* Decompression controller addr reg */
+#define kidr (DECOMP_DCR_BASE+0x1) /* Decompression controller data reg */
+ /* values for kiar register - indirect addressing of these regs */
+ #define kitor0 0x00 /* index table origin register 0 */
+ #define kitor1 0x01 /* index table origin register 1 */
+ #define kitor2 0x02 /* index table origin register 2 */
+ #define kitor3 0x03 /* index table origin register 3 */
+ #define kaddr0 0x04 /* address decode definition regsiter 0 */
+ #define kaddr1 0x05 /* address decode definition regsiter 1 */
+ #define kconf 0x40 /* decompression core config register */
+ #define kid 0x41 /* decompression core ID register */
+ #define kver 0x42 /* decompression core version # reg */
+ #define kpear 0x50 /* bus error addr reg (PLB addr) */
+ #define kbear 0x51 /* bus error addr reg (DCP to EBIU addr)*/
+ #define kesr0 0x52 /* bus error status reg 0 (R/clear) */
+ #define kesr0s 0x53 /* bus error status reg 0 (set) */
+ /* There are 0x400 of the following registers, from krom0 to krom3ff*/
+ /* Only the first one is given here. */
+ #define krom0 0x400 /* SRAM/ROM read/write */
+
+/******************************************************************************
+ * Power Management
+ ******************************************************************************/
+#define POWERMAN_DCR_BASE 0xb8
+#define cpmsr (POWERMAN_DCR_BASE+0x0) /* Power management status */
+#define cpmer (POWERMAN_DCR_BASE+0x1) /* Power management enable */
+#define cpmfr (POWERMAN_DCR_BASE+0x2) /* Power management force */
+
+/******************************************************************************
+ * Extrnal Bus Controller
+ ******************************************************************************/
+#define EBC_DCR_BASE 0x12
+#define ebccfga (EBC_DCR_BASE+0x0) /* External bus controller addr reg */
+#define ebccfgd (EBC_DCR_BASE+0x1) /* External bus controller data reg */
+ /* values for ebccfga register - indirect addressing of these regs */
+ #define pb0cr 0x00 /* periph bank 0 config reg */
+ #define pb1cr 0x01 /* periph bank 1 config reg */
+ #define pb2cr 0x02 /* periph bank 2 config reg */
+ #define pb3cr 0x03 /* periph bank 3 config reg */
+ #define pb4cr 0x04 /* periph bank 4 config reg */
+ #define pb5cr 0x05 /* periph bank 5 config reg */
+ #define pb6cr 0x06 /* periph bank 6 config reg */
+ #define pb7cr 0x07 /* periph bank 7 config reg */
+ #define pb0ap 0x10 /* periph bank 0 access parameters */
+ #define pb1ap 0x11 /* periph bank 1 access parameters */
+ #define pb2ap 0x12 /* periph bank 2 access parameters */
+ #define pb3ap 0x13 /* periph bank 3 access parameters */
+ #define pb4ap 0x14 /* periph bank 4 access parameters */
+ #define pb5ap 0x15 /* periph bank 5 access parameters */
+ #define pb6ap 0x16 /* periph bank 6 access parameters */
+ #define pb7ap 0x17 /* periph bank 7 access parameters */
+ #define pbear 0x20 /* periph bus error addr reg */
+ #define pbesr0 0x21 /* periph bus error status reg 0 */
+ #define pbesr1 0x22 /* periph bus error status reg 1 */
+ #define epcr 0x23 /* external periph control reg */
+
+/******************************************************************************
+ * Control
+ ******************************************************************************/
+#define CNTRL_DCR_BASE 0x0b0
+#define CPC0_PLLMR (CNTRL_DCR_BASE+0x0) /* PLL mode register */
+#define CPC0_CR0 (CNTRL_DCR_BASE+0x1) /* Control 0 register */
+#define CPC0_CR1 (CNTRL_DCR_BASE+0x2) /* Control 1 register */
+#define CPC0_PSR (CNTRL_DCR_BASE+0x4) /* strap register */
+
+#define ecr (0xaa) /* edge conditioner register (405gpr) */
+
+/* Bit definitions */
+#define PLLMR_FWD_DIV_MASK 0xE0000000 /* Forward Divisor */
+#define PLLMR_FWD_DIV_BYPASS 0xE0000000
+#define PLLMR_FWD_DIV_3 0xA0000000
+#define PLLMR_FWD_DIV_4 0x80000000
+#define PLLMR_FWD_DIV_6 0x40000000
+
+#define PLLMR_FB_DIV_MASK 0x1E000000 /* Feedback Divisor */
+#define PLLMR_FB_DIV_1 0x02000000
+#define PLLMR_FB_DIV_2 0x04000000
+#define PLLMR_FB_DIV_3 0x06000000
+#define PLLMR_FB_DIV_4 0x08000000
+
+#define PLLMR_TUNING_MASK 0x01F80000
+
+#define PLLMR_CPU_TO_PLB_MASK 0x00060000 /* CPU:PLB Frequency Divisor */
+#define PLLMR_CPU_PLB_DIV_1 0x00000000
+#define PLLMR_CPU_PLB_DIV_2 0x00020000
+#define PLLMR_CPU_PLB_DIV_3 0x00040000
+#define PLLMR_CPU_PLB_DIV_4 0x00060000
+
+#define PLLMR_OPB_TO_PLB_MASK 0x00018000 /* OPB:PLB Frequency Divisor */
+#define PLLMR_OPB_PLB_DIV_1 0x00000000
+#define PLLMR_OPB_PLB_DIV_2 0x00008000
+#define PLLMR_OPB_PLB_DIV_3 0x00010000
+#define PLLMR_OPB_PLB_DIV_4 0x00018000
+
+#define PLLMR_PCI_TO_PLB_MASK 0x00006000 /* PCI:PLB Frequency Divisor */
+#define PLLMR_PCI_PLB_DIV_1 0x00000000
+#define PLLMR_PCI_PLB_DIV_2 0x00002000
+#define PLLMR_PCI_PLB_DIV_3 0x00004000
+#define PLLMR_PCI_PLB_DIV_4 0x00006000
+
+#define PLLMR_EXB_TO_PLB_MASK 0x00001800 /* External Bus:PLB Divisor */
+#define PLLMR_EXB_PLB_DIV_2 0x00000000
+#define PLLMR_EXB_PLB_DIV_3 0x00000800
+#define PLLMR_EXB_PLB_DIV_4 0x00001000
+#define PLLMR_EXB_PLB_DIV_5 0x00001800
+
+/* definitions for PPC405GPr (new mode strapping) */
+#define PLLMR_FWDB_DIV_MASK 0x00000007 /* Forward Divisor B */
+
+#define PSR_PLL_FWD_MASK 0xC0000000
+#define PSR_PLL_FDBACK_MASK 0x30000000
+#define PSR_PLL_TUNING_MASK 0x0E000000
+#define PSR_PLB_CPU_MASK 0x01800000
+#define PSR_OPB_PLB_MASK 0x00600000
+#define PSR_PCI_PLB_MASK 0x00180000
+#define PSR_EB_PLB_MASK 0x00060000
+#define PSR_ROM_WIDTH_MASK 0x00018000
+#define PSR_ROM_LOC 0x00004000
+#define PSR_PCI_ASYNC_EN 0x00001000
+#define PSR_PERCLK_SYNC_MODE_EN 0x00000800 /* PPC405GPr only */
+#define PSR_PCI_ARBIT_EN 0x00000400
+#define PSR_NEW_MODE_EN 0x00000020 /* PPC405GPr only */
+
+/*
+ * PLL Voltage Controlled Oscillator (VCO) definitions
+ * Maximum and minimum values (in MHz) for correct PLL operation.
+ */
+#define VCO_MIN 400
+#define VCO_MAX 800
+
+/******************************************************************************
+ * Memory Access Layer
+ ******************************************************************************/
+#define MAL_DCR_BASE 0x180
+#define malmcr (MAL_DCR_BASE+0x00) /* MAL Config reg */
+#define malesr (MAL_DCR_BASE+0x01) /* Error Status reg (Read/Clear) */
+#define malier (MAL_DCR_BASE+0x02) /* Interrupt enable reg */
+#define maldbr (MAL_DCR_BASE+0x03) /* Mal Debug reg (Read only) */
+#define maltxcasr (MAL_DCR_BASE+0x04) /* TX Channel active reg (set) */
+#define maltxcarr (MAL_DCR_BASE+0x05) /* TX Channel active reg (Reset) */
+#define maltxeobisr (MAL_DCR_BASE+0x06) /* TX End of buffer int status reg */
+#define maltxdeir (MAL_DCR_BASE+0x07) /* TX Descr. Error Int reg */
+#define malrxcasr (MAL_DCR_BASE+0x10) /* RX Channel active reg (set) */
+#define malrxcarr (MAL_DCR_BASE+0x11) /* RX Channel active reg (Reset) */
+#define malrxeobisr (MAL_DCR_BASE+0x12) /* RX End of buffer int status reg */
+#define malrxdeir (MAL_DCR_BASE+0x13) /* RX Descr. Error Int reg */
+#define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table pointer reg */
+#define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table pointer reg */
+#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */
+#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */
+
+/*-----------------------------------------------------------------------------
+| IIC Register Offsets
+'----------------------------------------------------------------------------*/
+#define IICMDBUF 0x00
+#define IICSDBUF 0x02
+#define IICLMADR 0x04
+#define IICHMADR 0x05
+#define IICCNTL 0x06
+#define IICMDCNTL 0x07
+#define IICSTS 0x08
+#define IICEXTSTS 0x09
+#define IICLSADR 0x0A
+#define IICHSADR 0x0B
+#define IICCLKDIV 0x0C
+#define IICINTRMSK 0x0D
+#define IICXFRCNT 0x0E
+#define IICXTCNTLSS 0x0F
+#define IICDIRECTCNTL 0x10
+
+/*-----------------------------------------------------------------------------
+| UART Register Offsets
+'----------------------------------------------------------------------------*/
+#define DATA_REG 0x00
+#define DL_LSB 0x00
+#define DL_MSB 0x01
+#define INT_ENABLE 0x01
+#define FIFO_CONTROL 0x02
+#define LINE_CONTROL 0x03
+#define MODEM_CONTROL 0x04
+#define LINE_STATUS 0x05
+#define MODEM_STATUS 0x06
+#define SCRATCH 0x07
+
+/******************************************************************************
+ * On Chip Memory
+ ******************************************************************************/
+#define OCM_DCR_BASE 0x018
+#define ocmisarc (OCM_DCR_BASE+0x00) /* OCM I-side address compare reg */
+#define ocmiscntl (OCM_DCR_BASE+0x01) /* OCM I-side control reg */
+#define ocmdsarc (OCM_DCR_BASE+0x02) /* OCM D-side address compare reg */
+#define ocmdscntl (OCM_DCR_BASE+0x03) /* OCM D-side control reg */
+
+/******************************************************************************
+ * GPIO macro register defines
+ ******************************************************************************/
+#define GPIO_BASE 0xEF600700
+#define GPIO0_OR (GPIO_BASE+0x0)
+#define GPIO0_TCR (GPIO_BASE+0x4)
+#define GPIO0_OSRH (GPIO_BASE+0x8)
+#define GPIO0_OSRL (GPIO_BASE+0xC)
+#define GPIO0_TSRH (GPIO_BASE+0x10)
+#define GPIO0_TSRL (GPIO_BASE+0x14)
+#define GPIO0_ODR (GPIO_BASE+0x18)
+#define GPIO0_IR (GPIO_BASE+0x1C)
+#define GPIO0_RR1 (GPIO_BASE+0x20)
+#define GPIO0_RR2 (GPIO_BASE+0x24)
+#define GPIO0_ISR1H (GPIO_BASE+0x30)
+#define GPIO0_ISR1L (GPIO_BASE+0x34)
+#define GPIO0_ISR2H (GPIO_BASE+0x38)
+#define GPIO0_ISR2L (GPIO_BASE+0x3C)
+
+
+/*
+ * Macro for accessing the indirect EBC register
+ */
+#define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data)
+#define mfebc(reg, data) mtdcr(ebccfga,reg);data = mfdcr(ebccfgd)
+
+struct ppc4xx_sys_info
+{
+ unsigned long pllFwdDiv;
+ unsigned long pllFwdDivB;
+ unsigned long pllFbkDiv;
+ unsigned long pllPlbDiv;
+ unsigned long pllPciDiv;
+ unsigned long pllExtBusDiv;
+ unsigned long pllOpbDiv;
+ unsigned long freqVCOMhz; /* in MHz */
+ unsigned long freqProcessor;
+ unsigned long freqPLB;
+ unsigned long freqPCI;
+ unsigned long pciIntArbEn; /* Internal PCI arbiter is enabled */
+ unsigned long pciClkSync; /* PCI clock is synchronous */
+};
+
+#endif /* __PPC4XX_H__ */
+
diff --git a/src/cpu/ppc/ppc4xx/Config.lb b/src/cpu/ppc/ppc4xx/Config.lb
new file mode 100644
index 0000000000..1f1002293f
--- /dev/null
+++ b/src/cpu/ppc/ppc4xx/Config.lb
@@ -0,0 +1,9 @@
+##
+## CPU initialization
+##
+initinclude "EARLY_INIT" cpu/ppc/ppc4xx/ppc4xx.inc
+
+object mem.o
+object pci.S
+object clock.o
+
diff --git a/src/cpu/ppc/ppc4xx/clock.c b/src/cpu/ppc/ppc4xx/clock.c
new file mode 100644
index 0000000000..770c0fa117
--- /dev/null
+++ b/src/cpu/ppc/ppc4xx/clock.c
@@ -0,0 +1,173 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <ppc.h>
+#include <ppc4xx.h>
+#include <ppcreg.h>
+#include <string.h>
+
+/* ------------------------------------------------------------------------- */
+
+#define ONE_BILLION 1000000000
+
+void get_sys_info (struct ppc4xx_sys_info * sysInfo)
+{
+ unsigned long pllmr;
+ unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ * 1000);
+ unsigned pvr = ppc_getpvr();
+ unsigned long psr;
+ unsigned long m;
+
+ memset(&sysInfo, 0, sizeof(*sysInfo));
+
+ /*
+ * Read PLL Mode register
+ */
+ pllmr = ppc_getdcr(CPC0_PLLMR);
+
+ /*
+ * Read Pin Strapping register
+ */
+ psr = ppc_getdcr(CPC0_PSR);
+
+ /*
+ * Determine FWD_DIV.
+ */
+ sysInfo->pllFwdDiv = 8 - ((pllmr & PLLMR_FWD_DIV_MASK) >> 29);
+
+ /*
+ * Determine FBK_DIV.
+ */
+ sysInfo->pllFbkDiv = ((pllmr & PLLMR_FB_DIV_MASK) >> 25);
+ if (sysInfo->pllFbkDiv == 0) {
+ sysInfo->pllFbkDiv = 16;
+ }
+
+ /*
+ * Determine PLB_DIV.
+ */
+ sysInfo->pllPlbDiv = ((pllmr & PLLMR_CPU_TO_PLB_MASK) >> 17) + 1;
+
+ /*
+ * Determine PCI_DIV.
+ */
+ sysInfo->pllPciDiv = ((pllmr & PLLMR_PCI_TO_PLB_MASK) >> 13) + 1;
+
+ /*
+ * Determine EXTBUS_DIV.
+ */
+ sysInfo->pllExtBusDiv = ((pllmr & PLLMR_EXB_TO_PLB_MASK) >> 11) + 2;
+
+ /*
+ * Determine OPB_DIV.
+ */
+ sysInfo->pllOpbDiv = ((pllmr & PLLMR_OPB_TO_PLB_MASK) >> 15) + 1;
+
+ /*
+ * Check if PPC405GPr used (mask minor revision field)
+ */
+ if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) {
+ /*
+ * Determine FWD_DIV B (only PPC405GPr with new mode strapping).
+ */
+ sysInfo->pllFwdDivB = 8 - (pllmr & PLLMR_FWDB_DIV_MASK);
+
+ /*
+ * Determine factor m depending on PLL feedback clock source
+ */
+ if (!(psr & PSR_PCI_ASYNC_EN)) {
+ if (psr & PSR_NEW_MODE_EN) {
+ /*
+ * sync pci clock used as feedback (new mode)
+ */
+ m = 1 * sysInfo->pllFwdDivB * 2 * sysInfo->pllPciDiv;
+ } else {
+ /*
+ * sync pci clock used as feedback (legacy mode)
+ */
+ m = 1 * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv * sysInfo->pllPciDiv;
+ }
+ } else if (psr & PSR_NEW_MODE_EN) {
+ if (psr & PSR_PERCLK_SYNC_MODE_EN) {
+ /*
+ * PerClk used as feedback (new mode)
+ */
+ m = 1 * sysInfo->pllFwdDivB * 2 * sysInfo->pllExtBusDiv;
+ } else {
+ /*
+ * CPU clock used as feedback (new mode)
+ */
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDiv;
+ }
+ } else if (sysInfo->pllExtBusDiv == sysInfo->pllFbkDiv) {
+ /*
+ * PerClk used as feedback (legacy mode)
+ */
+ m = 1 * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv * sysInfo->pllExtBusDiv;
+ } else {
+ /*
+ * PLB clock used as feedback (legacy mode)
+ */
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv;
+ }
+
+ sysInfo->freqVCOMhz = (1000000 * m) / sysClkPeriodPs;
+ sysInfo->freqProcessor = (sysInfo->freqVCOMhz * 1000000) / sysInfo->pllFwdDiv;
+ sysInfo->freqPLB = (sysInfo->freqVCOMhz * 1000000) /
+ (sysInfo->pllFwdDivB * sysInfo->pllPlbDiv);
+ } else {
+ /*
+ * Check pllFwdDiv to see if running in bypass mode where the CPU speed
+ * is equal to the 405GP SYS_CLK_FREQ. If not in bypass mode, check VCO
+ * to make sure it is within the proper range.
+ * spec: VCO = SYS_CLOCK x FBKDIV x PLBDIV x FWDDIV
+ * Note freqVCO is calculated in Mhz to avoid errors introduced by rounding.
+ */
+ if (sysInfo->pllFwdDiv == 1) {
+ sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ * 1000000;
+ sysInfo->freqPLB = sysInfo->freqProcessor / sysInfo->pllPlbDiv;
+ } else {
+ sysInfo->freqVCOMhz = ( 1000000 *
+ sysInfo->pllFwdDiv *
+ sysInfo->pllFbkDiv *
+ sysInfo->pllPlbDiv
+ ) / sysClkPeriodPs;
+ if (sysInfo->freqVCOMhz >= VCO_MIN
+ && sysInfo->freqVCOMhz <= VCO_MAX) {
+ sysInfo->freqPLB = (ONE_BILLION /
+ ((sysClkPeriodPs * 10) /
+ sysInfo->pllFbkDiv)) * 10000;
+ sysInfo->freqProcessor = sysInfo->freqPLB * sysInfo->pllPlbDiv;
+ }
+ }
+ }
+}
+
+unsigned long get_clock_speed(void)
+{
+ struct ppc4xx_sys_info sys_info;
+
+ get_sys_info(&sys_info);
+ return sys_info.freqProcessor;
+}
diff --git a/src/cpu/ppc/ppc4xx/mem.c b/src/cpu/ppc/ppc4xx/mem.c
new file mode 100644
index 0000000000..9fa6daa19b
--- /dev/null
+++ b/src/cpu/ppc/ppc4xx/mem.c
@@ -0,0 +1,7 @@
+#include <mem.h>
+
+struct mem_range *
+sizeram(void)
+{
+ return 0;
+}
diff --git a/src/cpu/ppc/ppc4xx/ppc4xx.inc b/src/cpu/ppc/ppc4xx/ppc4xx.inc
new file mode 100644
index 0000000000..b365988d6c
--- /dev/null
+++ b/src/cpu/ppc/ppc4xx/ppc4xx.inc
@@ -0,0 +1,750 @@
+#if 0
+/*
+ * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
+ * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ * Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * This source code has been made available to you by IBM on an AS-IS
+ * basis. Anyone receiving this source is licensed under IBM
+ * copyrights to use it in any way he or she deems fit, including
+ * copying it, modifying it, compiling it, and redistributing it either
+ * with or without modifications. No license under IBM patents or
+ * patent applications is to be implied by the copyright license.
+ *
+ * Any user of this software should understand that IBM cannot provide
+ * technical support for this software and will not be responsible for
+ * any consequences resulting from the use of this software.
+ *
+ * Any person who transfers this source code or any derivative work
+ * must include the IBM copyright notice, this paragraph, and the
+ * preceding two paragraphs in the transferred software.
+ *
+ * COPYRIGHT I B M CORPORATION 1995
+ * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+ *
+ */
+
+/*
+ * Startup Code for IBM 4xx PowerPC based Embedded Boards
+ *
+ * Base on the U-Boot Startup Code
+ *
+ * The processor starts at 0xfffffffc and the code is executed
+ * from flash/rom.
+ * in memory, but as long we don't jump around before relocating.
+ * board_init lies at a quite high address and when the cpu has
+ * jumped there, everything is ok.
+ * This works because the cpu gives the FLASH (CS0) the whole
+ * address space at startup, and board_init lies as a echo of
+ * the flash somewhere up there in the memorymap.
+ *
+ * board_init will change CS0 to be positioned at the correct
+ * address and (s)dram will be positioned at address 0
+ */
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+ .globl _start
+_start:
+
+/*****************************************************************************/
+ addi r4,r0,0x0000
+ mtspr sgr,r4
+ mtspr dcwr,r4
+ mtesr r4 /* clear Exception Syndrome Reg */
+ mttcr r4 /* clear Timer Control Reg */
+ mtxer r4 /* clear Fixed-Point Exception Reg */
+ mtevpr r4 /* clear Exception Vector Prefix Reg */
+ addi r4,r0,0x1000 /* set ME bit (Machine Exceptions) */
+ oris r4,r4,0x0002 /* set CE bit (Critical Exceptions) */
+ mtmsr r4 /* change MSR */
+ addi r4,r0,(0xFFFF-0x10000) /* set r4 to 0xFFFFFFFF (status in the */
+ /* dbsr is cleared by setting bits to 1) */
+ mtdbsr r4 /* clear/reset the dbsr */
+
+ /*----------------------------------------------------------------------- */
+ /* Invalidate I and D caches. Enable I cache for defined memory regions */
+ /* to speed things up. Leave the D cache disabled for now. It will be */
+ /* enabled/left disabled later based on user selected menu options. */
+ /* Be aware that the I cache may be disabled later based on the menu */
+ /* options as well. See miscLib/main.c. */
+ /*----------------------------------------------------------------------- */
+ bl invalidate_icache
+ bl invalidate_dcache
+
+ /*----------------------------------------------------------------------- */
+ /* Enable two 128MB cachable regions. */
+ /*----------------------------------------------------------------------- */
+ addis r4,r0,0x8000
+ addi r4,r4,0x0001
+ mticcr r4 /* instruction cache */
+ isync
+
+ addis r4,r0,0x0000
+ addi r4,r4,0x0000
+ mtdccr r4 /* data cache */
+
+#if !(defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR))
+ /*----------------------------------------------------------------------- */
+ /* Tune the speed and size for flash CS0 */
+ /*----------------------------------------------------------------------- */
+ bl ext_bus_cntlr_init
+#endif
+
+#if defined(CONFIG_405EP)
+ /*----------------------------------------------------------------------- */
+ /* DMA Status, clear to come up clean */
+ /*----------------------------------------------------------------------- */
+ addis r3,r0, 0xFFFF /* Clear all existing DMA status */
+ ori r3,r3, 0xFFFF
+ mtdcr dmasr, r3
+
+ bl ppc405ep_init /* do ppc405ep specific init */
+#endif /* CONFIG_405EP */
+
+ /*----------------------------------------------------------------------- */
+ /* Setup temporary stack in DCACHE or OCM if needed for SDRAM SPD. */
+ /*----------------------------------------------------------------------- */
+#ifdef CFG_INIT_DCACHE_CS
+ /*----------------------------------------------------------------------- */
+ /* Memory Bank x (nothingness) initialization 1GB+64MEG */
+ /* used as temporary stack pointer for stage0 */
+ /*----------------------------------------------------------------------- */
+ li r4,PBxAP
+ mtdcr ebccfga,r4
+ lis r4,0x0380
+ ori r4,r4,0x0480
+ mtdcr ebccfgd,r4
+
+ addi r4,0,PBxCR
+ mtdcr ebccfga,r4
+ lis r4,0x400D
+ ori r4,r4,0xa000
+ mtdcr ebccfgd,r4
+
+ /* turn on data chache for this region */
+ lis r4,0x0080
+ mtdccr r4
+
+ /* set stack pointer and clear stack to known value */
+
+ lis r1,CFG_INIT_RAM_ADDR@h
+ ori r1,r1,CFG_INIT_SP_OFFSET@l
+
+ li r4,2048 /* we store 2048 words to stack */
+ mtctr r4
+
+ lis r2,CFG_INIT_RAM_ADDR@h /* we also clear data area */
+ ori r2,r2,CFG_INIT_RAM_END@l /* so cant copy value from r1 */
+
+ lis r4,0xdead /* we store 0xdeaddead in the stack */
+ ori r4,r4,0xdead
+
+..stackloop:
+ stwu r4,-4(r2)
+ bdnz ..stackloop
+
+ li r0, 0 /* Make room for stack frame header and */
+ stwu r0, -4(r1) /* clear final stack frame so that */
+ stwu r0, -4(r1) /* stack backtraces terminate cleanly */
+ /*
+ * Set up a dummy frame to store reset vector as return address.
+ * this causes stack underflow to reset board.
+ */
+ stwu r1, -8(r1) /* Save back chain and move SP */
+ addis r0, 0, RESET_VECTOR@h /* Address of reset vector */
+ ori r0, r0, RESET_VECTOR@l
+ stwu r1, -8(r1) /* Save back chain and move SP */
+ stw r0, +12(r1) /* Save return addr (underflow vect) */
+#endif /* CFG_INIT_DCACHE_CS */
+
+ /*----------------------------------------------------------------------- */
+ /* Initialize SDRAM Controller */
+ /*----------------------------------------------------------------------- */
+ bl sdram_init
+
+ /*
+ * Setup temporary stack pointer only for boards
+ * that do not use SDRAM SPD I2C stuff since it
+ * is already initialized to use DCACHE or OCM
+ * stacks.
+ */
+#if !(defined(CFG_INIT_DCACHE_CS) || defined(CFG_TEMP_STACK_OCM))
+ lis r1, CFG_INIT_RAM_ADDR@h
+ ori r1,r1,CFG_INIT_SP_OFFSET /* set up the stack in SDRAM */
+
+ li r0, 0 /* Make room for stack frame header and */
+ stwu r0, -4(r1) /* clear final stack frame so that */
+ stwu r0, -4(r1) /* stack backtraces terminate cleanly */
+ /*
+ * Set up a dummy frame to store reset vector as return address.
+ * this causes stack underflow to reset board.
+ */
+ stwu r1, -8(r1) /* Save back chain and move SP */
+ lis r0, RESET_VECTOR@h /* Address of reset vector */
+ ori r0, r0, RESET_VECTOR@l
+ stwu r1, -8(r1) /* Save back chain and move SP */
+ stw r0, +12(r1) /* Save return addr (underflow vect) */
+#endif /* !(CFG_INIT_DCACHE_CS || !CFG_TEM_STACK_OCM) */
+
+ GET_GOT /* initialize GOT access */
+
+ bl cpu_init_f /* run low-level CPU init code (from Flash) */
+
+ /* NEVER RETURNS! */
+ bl board_init_f /* run first part of init code (from Flash) */
+
+
+
+/* Cache functions.
+*/
+invalidate_icache:
+ iccci r0,r0 /* for 405, iccci invalidates the */
+ blr /* entire I cache */
+
+invalidate_dcache:
+ addi r6,0,0x0000 /* clear GPR 6 */
+ /* Do loop for # of dcache congruence classes. */
+ addi r7,r0, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)
+ /* NOTE: dccci invalidates both */
+ mtctr r7 /* ways in the D cache */
+..dcloop:
+ dccci 0,r6 /* invalidate line */
+ addi r6,r6, CFG_CACHELINE_SIZE /* bump to next line */
+ bdnz ..dcloop
+ blr
+
+flush_dcache:
+ addis r9,r0,0x0002 /* set mask for EE and CE msr bits */
+ ori r9,r9,0x8000
+ mfmsr r12 /* save msr */
+ andc r9,r12,r9
+ mtmsr r9 /* disable EE and CE */
+ addi r10,r0,0x0001 /* enable data cache for unused memory */
+ mfdccr r9 /* region 0xF8000000-0xFFFFFFFF via */
+ or r10,r10,r9 /* bit 31 in dccr */
+ mtdccr r10
+
+ /* do loop for # of congruence classes. */
+ addi r10,r0,(CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)
+ addi r11,r0,(CFG_DCACHE_SIZE / 2) /* D cache set size - 2 way sets */
+ mtctr r10
+ addi r10,r0,(0xE000-0x10000) /* start at 0xFFFFE000 */
+ add r11,r10,r11 /* add to get to other side of cache line */
+..flush_dcache_loop:
+ lwz r3,0(r10) /* least recently used side */
+ lwz r3,0(r11) /* the other side */
+ dccci r0,r11 /* invalidate both sides */
+ addi r10,r10,CFG_CACHELINE_SIZE /* bump to next line */
+ addi r11,r11,CFG_CACHELINE_SIZE /* bump to next line */
+ bdnz ..flush_dcache_loop
+ sync /* allow memory access to complete */
+ mtdccr r9 /* restore dccr */
+ mtmsr r12 /* restore msr */
+ blr
+
+ .globl icache_enable
+icache_enable:
+ mflr r8
+ bl invalidate_icache
+ mtlr r8
+ isync
+ addis r3,r0, 0x8000 /* set bit 0 */
+ mticcr r3
+ blr
+
+ .globl icache_disable
+icache_disable:
+ addis r3,r0, 0x0000 /* clear bit 0 */
+ mticcr r3
+ isync
+ blr
+
+ .globl icache_status
+icache_status:
+ mficcr r3
+ srwi r3, r3, 31 /* >>31 => select bit 0 */
+ blr
+
+ .globl dcache_enable
+dcache_enable:
+ mflr r8
+ bl invalidate_dcache
+ mtlr r8
+ isync
+ addis r3,r0, 0x8000 /* set bit 0 */
+ mtdccr r3
+ blr
+
+ .globl dcache_disable
+dcache_disable:
+ mflr r8
+ bl flush_dcache
+ mtlr r8
+ addis r3,r0, 0x0000 /* clear bit 0 */
+ mtdccr r3
+ blr
+
+ .globl dcache_status
+dcache_status:
+ mfdccr r3
+ srwi r3, r3, 31 /* >>31 => select bit 0 */
+ blr
+
+ .globl get_pvr
+get_pvr:
+ mfspr r3, PVR
+ blr
+
+#if !defined(CONFIG_440)
+ .globl wr_pit
+wr_pit:
+ mtspr pit, r3
+ blr
+#endif
+
+ .globl wr_tcr
+wr_tcr:
+ mtspr tcr, r3
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: ppcDcbf */
+/* Description: Data Cache block flush */
+/* Input: r3 = effective address */
+/* Output: none. */
+/*------------------------------------------------------------------------------- */
+ .globl ppcDcbf
+ppcDcbf:
+ dcbf r0,r3
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: ppcDcbi */
+/* Description: Data Cache block Invalidate */
+/* Input: r3 = effective address */
+/* Output: none. */
+/*------------------------------------------------------------------------------- */
+ .globl ppcDcbi
+ppcDcbi:
+ dcbi r0,r3
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: ppcSync */
+/* Description: Processor Synchronize */
+/* Input: none. */
+/* Output: none. */
+/*------------------------------------------------------------------------------- */
+ .globl ppcSync
+ppcSync:
+ sync
+ blr
+
+/*------------------------------------------------------------------------------*/
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r3 = dest
+ * r4 = src
+ * r5 = length in bytes
+ * r6 = cachelinesize
+ */
+ .globl relocate_code
+relocate_code:
+ mr r1, r3 /* Set new stack pointer */
+ mr r9, r4 /* Save copy of Init Data pointer */
+ mr r10, r5 /* Save copy of Destination Address */
+
+ mr r3, r5 /* Destination Address */
+ lis r4, CFG_MONITOR_BASE@h /* Source Address */
+ ori r4, r4, CFG_MONITOR_BASE@l
+ lwz r5, GOT(__init_end)
+ sub r5, r5, r4
+ li r6, CFG_CACHELINE_SIZE /* Cache Line Size */
+
+ /*
+ * Fix GOT pointer:
+ *
+ * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address
+ *
+ * Offset:
+ */
+ sub r15, r10, r4
+
+ /* First our own GOT */
+ add r14, r14, r15
+ /* the the one used by the C code */
+ add r30, r30, r15
+
+ /*
+ * Now relocate code
+ */
+
+ cmplw cr1,r3,r4
+ addi r0,r5,3
+ srwi. r0,r0,2
+ beq cr1,4f /* In place copy is not necessary */
+ beq 7f /* Protect against 0 count */
+ mtctr r0
+ bge cr1,2f
+
+ la r8,-4(r4)
+ la r7,-4(r3)
+1: lwzu r0,4(r8)
+ stwu r0,4(r7)
+ bdnz 1b
+ b 4f
+
+2: slwi r0,r0,2
+ add r8,r4,r0
+ add r7,r3,r0
+3: lwzu r0,-4(r8)
+ stwu r0,-4(r7)
+ bdnz 3b
+
+/*
+ * Now flush the cache: note that we must start from a cache aligned
+ * address. Otherwise we might miss one cache line.
+ */
+4: cmpwi r6,0
+ add r5,r3,r5
+ beq 7f /* Always flush prefetch queue in any case */
+ subi r0,r6,1
+ andc r3,r3,r0
+ mr r4,r3
+5: dcbst 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 5b
+ sync /* Wait for all dcbst to complete on bus */
+ mr r4,r3
+6: icbi 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 6b
+7: sync /* Wait for all icbi to complete on bus */
+ isync
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+
+ addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
+ mtlr r0
+ blr /* NEVER RETURNS! */
+
+in_ram:
+
+ /*
+ * Relocation Function, r14 point to got2+0x8000
+ *
+ * Adjust got2 pointers, no need to check for 0, this code
+ * already puts a few entries in the table.
+ */
+ li r0,__got2_entries@sectoff@l
+ la r3,GOT(_GOT2_TABLE_)
+ lwz r11,GOT(_GOT2_TABLE_)
+ mtctr r0
+ sub r11,r3,r11
+ addi r3,r3,-4
+1: lwzu r0,4(r3)
+ add r0,r0,r11
+ stw r0,0(r3)
+ bdnz 1b
+
+ /*
+ * Now adjust the fixups and the pointers to the fixups
+ * in case we need to move ourselves again.
+ */
+2: li r0,__fixup_entries@sectoff@l
+ lwz r3,GOT(_FIXUP_TABLE_)
+ cmpwi r0,0
+ mtctr r0
+ addi r3,r3,-4
+ beq 4f
+3: lwzu r4,4(r3)
+ lwzux r0,r4,r11
+ add r0,r0,r11
+ stw r10,0(r3)
+ stw r0,0(r4)
+ bdnz 3b
+4:
+clear_bss:
+ /*
+ * Now clear BSS segment
+ */
+ lwz r3,GOT(__bss_start)
+ lwz r4,GOT(_end)
+
+ cmplw 0, r3, r4
+ beq 6f
+
+ li r0, 0
+5:
+ stw r0, 0(r3)
+ addi r3, r3, 4
+ cmplw 0, r3, r4
+ bne 5b
+6:
+
+ mr r3, r9 /* Init Data pointer */
+ mr r4, r10 /* Destination Address */
+ bl board_init_r
+
+ /*
+ * Copy exception vector code to low memory
+ *
+ * r3: dest_addr
+ * r7: source address, r8: end address, r9: target address
+ */
+ .globl trap_init
+trap_init:
+ lwz r7, GOT(_start)
+ lwz r8, GOT(_end_of_vectors)
+
+ li r9, 0x100 /* reset vector always at 0x100 */
+
+ cmplw 0, r7, r8
+ bgelr /* return if r7>=r8 - just in case */
+
+ mflr r4 /* save link register */
+1:
+ lwz r0, 0(r7)
+ stw r0, 0(r9)
+ addi r7, r7, 4
+ addi r9, r9, 4
+ cmplw 0, r7, r8
+ bne 1b
+
+ /*
+ * relocate `hdlr' and `int_return' entries
+ */
+ li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
+ li r8, Alignment - _start + EXC_OFF_SYS_RESET
+2:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 2b
+
+ li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
+ li r8, SystemCall - _start + EXC_OFF_SYS_RESET
+3:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 3b
+
+ li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
+ li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
+4:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 4b
+
+ mtlr r4 /* restore link register */
+ blr
+
+ /*
+ * Function: relocate entries for one exception vector
+ */
+trap_reloc:
+ lwz r0, 0(r7) /* hdlr ... */
+ add r0, r0, r3 /* ... += dest_addr */
+ stw r0, 0(r7)
+
+ lwz r0, 4(r7) /* int_return ... */
+ add r0, r0, r3 /* ... += dest_addr */
+ stw r0, 4(r7)
+
+ blr
+
+
+#ifdef CONFIG_405EP
+ppc405ep_init:
+ /*
+ !-----------------------------------------------------------------------
+ ! Check FPGA for PCI internal/external arbitration
+ ! If board is set to internal arbitration, update cpc0_pci
+ !-----------------------------------------------------------------------
+ */
+ addi r3,0,CPC0_PCI_HOST_CFG_EN
+#ifdef CONFIG_BUBINGA405EP
+ addis r5,r0,FPGA_REG1@h /* set offset for FPGA_REG1 */
+ ori r5,r5,FPGA_REG1@l
+ lbz r5,0x0(r5) /* read to get PCI arb selection */
+ andi. r6,r5,FPGA_REG1_PCI_INT_ARB /* using internal arbiter ?*/
+ beq ..pci_cfg_set /* if not set, then bypass reg write*/
+#endif
+ ori r3,r3,CPC0_PCI_ARBIT_EN
+..pci_cfg_set:
+ mtdcr CPC0_PCI, r3 /* Enable internal arbiter*/
+
+ /*
+ !-----------------------------------------------------------------------
+ ! Check to see if chip is in bypass mode.
+ ! If so, write stored CPC0_PLLMR0 and CPC0_PLLMR1 values and perform a
+ ! CPU reset Otherwise, skip this step and keep going.
+ ! Note: Running BIOS in bypass mode is not supported since PLB speed
+ ! will not be fast enough for the SDRAM (min 66MHz)
+ !-----------------------------------------------------------------------
+ */
+ mfdcr r5, CPC0_PLLMR1
+ rlwinm r4,r5,1,0x1 /* get system clock source (SSCS) */
+ cmpi cr0,0,r4,0x1
+
+ beq pll_done /* if SSCS =b'1' then PLL has */
+ /* already been set */
+ /* and CPU has been reset */
+ /* so skip to next section */
+
+#ifdef CONFIG_BUBINGA405EP
+ /*
+ !-----------------------------------------------------------------------
+ ! Read NVRAM to get value to write in PLLMR.
+ ! If value has not been correctly saved, write default value
+ ! Default config values (assuming on-board 33MHz SYS_CLK) are above.
+ ! See CPU_DEFAULT_200 and CPU_DEFAULT_266 above.
+ !
+ ! WARNING: This code assumes the first three words in the nvram_t
+ ! structure in openbios.h. Changing the beginning of
+ ! the structure will break this code.
+ !
+ !-----------------------------------------------------------------------
+ */
+ addis r3,0,NVRAM_BASE@h
+ addi r3,r3,NVRAM_BASE@l
+
+ lwz r4, 0(r3)
+ addis r5,0,NVRVFY1@h
+ addi r5,r5,NVRVFY1@l
+ cmp cr0,0,r4,r5 /* Compare 1st NVRAM Magic number*/
+ bne ..no_pllset
+ addi r3,r3,4
+ lwz r4, 0(r3)
+ addis r5,0,NVRVFY2@h
+ addi r5,r5,NVRVFY2@l
+ cmp cr0,0,r4,r5 /* Compare 2 NVRAM Magic number */
+ bne ..no_pllset
+ addi r3,r3,8 /* Skip over conf_size */
+ lwz r4, 4(r3) /* Load PLLMR1 value from NVRAM */
+ lwz r3, 0(r3) /* Load PLLMR0 value from NVRAM */
+ rlwinm r5,r4,1,0x1 /* get system clock source (SSCS) */
+ cmpi cr0,0,r5,1 /* See if PLL is locked */
+ beq pll_write
+..no_pllset:
+#endif /* CONFIG_BUBINGA405EP */
+
+ addis r3,0,PLLMR0_DEFAULT@h /* PLLMR0 default value */
+ ori r3,r3,PLLMR0_DEFAULT@l /* */
+ addis r4,0,PLLMR1_DEFAULT@h /* PLLMR1 default value */
+ ori r4,r4,PLLMR1_DEFAULT@l /* */
+
+ b pll_write /* Write the CPC0_PLLMR with new value */
+
+pll_done:
+ /*
+ !-----------------------------------------------------------------------
+ ! Clear Soft Reset Register
+ ! This is needed to enable PCI if not booting from serial EPROM
+ !-----------------------------------------------------------------------
+ */
+ addi r3, 0, 0x0
+ mtdcr CPC0_SRR, r3
+
+ addis r3,0,0x0010
+ mtctr r3
+pci_wait:
+ bdnz pci_wait
+
+ blr /* return to main code */
+
+/*
+!-----------------------------------------------------------------------------
+! Function: pll_write
+! Description: Updates the value of the CPC0_PLLMR according to CMOS27E documentation
+! That is:
+! 1. Pll is first disabled (de-activated by putting in bypass mode)
+! 2. PLL is reset
+! 3. Clock dividers are set while PLL is held in reset and bypassed
+! 4. PLL Reset is cleared
+! 5. Wait 100us for PLL to lock
+! 6. A core reset is performed
+! Input: r3 = Value to write to CPC0_PLLMR0
+! Input: r4 = Value to write to CPC0_PLLMR1
+! Output r3 = none
+!-----------------------------------------------------------------------------
+*/
+pll_write:
+ mfdcr r5, CPC0_UCR
+ andis. r5,r5,0xFFFF
+ ori r5,r5,0x0101 /* Stop the UART clocks */
+ mtdcr CPC0_UCR,r5 /* Before changing PLL */
+
+ mfdcr r5, CPC0_PLLMR1
+ rlwinm r5,r5,0,0x7FFFFFFF /* Disable PLL */
+ mtdcr CPC0_PLLMR1,r5
+ oris r5,r5,0x4000 /* Set PLL Reset */
+ mtdcr CPC0_PLLMR1,r5
+
+ mtdcr CPC0_PLLMR0,r3 /* Set clock dividers */
+ rlwinm r5,r4,0,0x3FFFFFFF /* Reset & Bypass new PLL dividers */
+ oris r5,r5,0x4000 /* Set PLL Reset */
+ mtdcr CPC0_PLLMR1,r5 /* Set clock dividers */
+ rlwinm r5,r5,0,0xBFFFFFFF /* Clear PLL Reset */
+ mtdcr CPC0_PLLMR1,r5
+
+ /*
+ ! Wait min of 100us for PLL to lock.
+ ! See CMOS 27E databook for more info.
+ ! At 200MHz, that means waiting 20,000 instructions
+ */
+ addi r3,0,20000 /* 2000 = 0x4e20 */
+ mtctr r3
+pll_wait:
+ bdnz pll_wait
+
+ oris r5,r5,0x8000 /* Enable PLL */
+ mtdcr CPC0_PLLMR1,r5 /* Engage */
+
+ /*
+ * Reset CPU to guarantee timings are OK
+ * Not sure if this is needed...
+ */
+ addis r3,0,0x1000
+ mtspr dbcr0,r3 /* This will cause a CPU core reset, and */
+ /* execution will continue from the poweron */
+ /* vector of 0xfffffffc */
+#endif /* CONFIG_405EP */
+#endif